Start Kubernetes proxy server automatically

readme.md

1. Create an empty file and paste the content bellow into it /lib/systemd/system/kubectlproxy.service

[Unit]
Description=kubectl proxy 8080
After=network.target

[Service]
User=root
ExecStart=/bin/bash -c "/usr/bin/kubectl proxy --address=127.0.0.1 --port=8080"
StartLimitInterval=0
RestartSec=10
Restart=always

[Install]
WantedBy=multi-user.target

2. Restart the server
3. Check the service status systemctl -l status kubectlproxy.service
4. If the service is not enabled (error bellow)

kubectl-proxy.service - kubectl proxy 8080
   Loaded: loaded (/lib/systemd/system/kubectl-proxy.service; disabled; vendor preset: enabled)
   Active: inactive (dead)

enable it by this command systemctl enable kubectlproxy.service

Notes If you modify the configuration of the service after start you need to run the following

1. systemctl daemon-reload
2. systemctl reenable kubectlproxy.service
3. systemctl restart kubectlproxy.service

@Trackhe ?

@Trackhe Run it with 0.0.0.0 instead of 127.0.0.1