gistfile1.txt

SENT: M122
READ: === Diagnostics ===
READ: RepRapFirmware for LPC176x based Boards (generic) version 3.2-beta1_2 running on LPC176x at 120Mhz
READ: Used output buffers: 1 of 16 (1 max)
READ: === RTOS ===
READ: Static ram: 4704
READ: Dynamic Memory (RTOS Heap 5): 3832 free, 3808 never used
READ: Exception stack ram used: 288
READ: Never used ram: 396
READ: Tasks: HEAT(suspended,370) MAIN(running,542) IDLE(ready,20)
READ: Owned mutexes:
READ: === Platform ===
READ: Last reset 00:00:28 ago, cause: [power up]
READ: Last software reset details not available
READ: Error status: 0x020
READ: Supply voltage: under voltage events: 0
READ: Driver 0: position 0
READ: Driver 1: position 0
READ: Driver 2: position 0
READ: Driver 3: position 0
READ: Driver 4: position 0
READ: Driver 5: position 0
READ: Driver 6: position 0
READ: Date/time: 1970-01-01 00:00:00
READ: Slowest loop: 0.49ms; fastest: 0.29ms
READ: Step timer: target 0 count 14252270 delta -14252270 late 0
READ: USBSerial connected 1
READ: ADC not ready 0 ADC error threshold 10 ADC Init 1
READ: Ints: 0; Calls 0; fast: 4294967295uS; slow 0uS adj 0 bad 0 big delta 0
READ: PWM Channels
READ: Delta -871184404 Start -1 End -1
READ: === Move ===
READ: Hiccups: 0, FreeDm: 100, MinFreeDm: 100, MaxWait: 0ms
READ: Bed compensation in use: none, comp offset 0.000
READ: === DDARing ===
READ: Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
READ: === Heat ===
READ: Bed heaters = -1, chamberHeaters = -1
READ: === GCodes ===
READ: Segments left: 0
READ: Movement lock held by null
READ: HTTP is idle in state(s) 0
READ: Telnet is idle in state(s) 0
READ: File is idle in state(s) 0
READ: USB is ready with "M122" in state(s) 0
READ: Aux is idle in state(s) 0
READ: Trigger is idle in state(s) 0
READ: Queue is idle in state(s) 0
READ: LCD is idle in state(s) 0
READ: SBC is idle in state(s) 0
READ: Daemon* is idle in state(s) 0 0, running macro
READ: Aux2 is idle in state(s) 0
READ: Autopause is idle in state(s) 0
READ: Code queue is empty.
READ: === SBC interface ===
READ: State: 0, failed transfers: 0
READ: Last transfer: 4162ms ago
READ: RX/TX seq numbers: 1/1
READ: SPI underruns 0, overruns 0
READ: Number of disconnects: 0
READ: Buffer RX/TX: 0/0-0
READ: ok
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok 
SENT: M105
READ: ok