MILKV_Duo_Init.md

RNDIS Driver

Plugin the duo without carrier board

then refer https://milkv.io/docs/duo/getting-started/setup

ssh [email protected]
yes
milkv

duo st7789

run git clone https://github.com/milkv-duo/duo-buildroot-sdk.git

follow instructions in the repo.

Hardware Connection:

Duo       |       st7789
GND       |         GND
3.3v(out) |         VCC
GPIO23    |         SCL
GPIO22    |         SDA
GPIOA23   |         RES
GPIOA24   |         DC
GPIO18    |         CS

Follow this Guide:

https://community.milkv.io/t/milk-v-duo-spi-st7789/131

cross-compile in Ubuntu

unset LD_LIBRARY_PATH

after compile

set LD_LIBRARY_PATH

build riscv-gnu-toolchain

https://github.com/riscv-collab/riscv-gnu-toolchain

make linux:

./configure --prefix=/opt/riscv
make linux

make musl:

./configure --prefix=/opt/riscv
make musl

export PATH="$PATH:/opt/riscv/bin"

---

Upside not work for me,so I refer https://community.milkv.io/t/opencv-4-5-4/82

wget https://sophon-file.sophon.cn/sophon-prod-s3/drive/23/03/07/16/host-tools.tar.gz
tar xvf host-tools.tar.gz
cd host-tools 
touch riscv-crosstool-env-init 
nano riscv-crosstool-env-init 

content is:

HOST_TOOL_PATH=/xxx/xxx/xxx/host-tools

export PATH="$HOST_TOOL_PATH/gcc/riscv64-linux-x86_64/bin:$HOST_TOOL_PATH/gcc/riscv64-linux-musl-x86_64/bin:$HOST_TOOL_PATH/gcc/riscv64-elf-x86_64/bin:$PATH"

echo -e "\033[33;1mriscv交叉编译工具链环境配置完成！\033[0m"

in sdk root folder

source /xxx/xxx/xxx/host-tools/riscv-crosstool-env-init 

then you can compile the code

Target Package

https://community.milkv.io/t/milkv-duo-python-pip3-nano-vim-tmux/611