Skip to content

Instantly share code, notes, and snippets.

View MatthieuLeboeuf's full-sized avatar

Matthieu Leboeuf MatthieuLeboeuf

View GitHub Profile
@lopestom
lopestom / Custom Recovery for MediaTek devices-0.md
Last active March 24, 2025 13:43
Make a Device Tree - Minimal Manifest

Preface

Before anything or any comments or ideas, this is a way I wanted to try to inform and update what a device tree is and what it has, and finally how Custom Recovery is created. So this is not a complete guide and it won't be! I never intended to do that.

The original idea

Please take a look and may you take a few minutes to read the original guide. I had written myself that I intended to update the information. I hope that after reading the original guide you can go back and have a few minutes of reading and mainly practice to gain experience.

This guide comes to complement or update some important information. All thanks to @rokibhasansagar about first guide Make A TWRP Tree For Your Device & Build

Certainly, given the breadth of the subject, it should have many more parts. But understand about "Minimal" thinking and that I didn't intend to extend it any further than necessary. So the guide has:

Proxmox VE Installation on Hetzner Server via Rescue System

Follow these steps to install Proxmox VE on a Hetzner server via the Rescue System. The Rescue System is a Linux-based environment that can be booted into to perform system recovery tasks. We'll be using it to install Proxmox VE.

In order to complete the process, it is indeed necessary to first boot into the Rescue System and then connect to it via SSH. This will allow you to run the commands for installing Proxmox VE. Here are the steps:

Starting the Rescue System

  1. Log into the Hetzner Robot.
  2. Under "Main Functions; Server" select the desired server and then open the tab "Rescue".