Skip to content

Instantly share code, notes, and snippets.

@McPrapor

McPrapor/gist:e2b9a956a131144596d3313e79782a32

Created November 24, 2019 16:33
Show Gist options
  • Save McPrapor/e2b9a956a131144596d3313e79782a32 to your computer and use it in GitHub Desktop.
Save McPrapor/e2b9a956a131144596d3313e79782a32 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
m4h0n3y@troislitresdevodka:~$ adb shell
htc_v36bml_dugl:/ $ su
htc_v36bml_dugl:/ # dmesg
[ 0.000000] -(0)[0:swapper]Initializing cgroup subsys cpu
[ 0.000000] -(0)[0:swapper]Initializing cgroup subsys cpuacct
[ 0.000000] -(0)[0:swapper]Linux version 3.18.119 (root@alpz) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Nov 22 16:01:22 UTC 2019
[ 0.000000] -(0)[0:swapper]Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] -(0)[0:swapper][PHY layout]mblock-2-lk_init_display : 0xff370000 - 0xffffffff (0xc90000)
[ 0.000000] -(0)[0:swapper][PHY layout]mblock-1-trustzone_pre_init : 0xbffc0000 - 0xbfffffff (0x40000)
[ 0.000000] -(0)[0:swapper][PHY layout]atf-reserved-memory@43000000 : 0x43000000 - 0x4302ffff (0x30000)
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node reserve-memory-dram_r1_dummy_read, compatible id reserve-memory-dram_r1_dummy_read
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node reserve-memory-dram_r0_dummy_read, compatible id reserve-memory-dram_r0_dummy_read
[ 0.000000] -(0)[0:swapper][PHY layout]reserve-memory-ccci_md1 : 0xfa000000 - 0xfd80ffff (0x3810000)
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node reserve-memory-ccci_md1, compatible id mediatek,reserve-memory-ccci_md1
[ 0.000000] -(0)[0:swapper][PHY layout]consys-reserve-memory : 0xff200000 - 0xff2fffff (0x100000)
[ 0.000000] -(0)[0:swapper][CONNADP]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xff200000, size: 0x100000
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory
[ 0.000000] -(0)[0:swapper][PHY layout]spm-reserve-memory : 0x9ffe0000 - 0x9ffeffff (0x10000)
[ 0.000000] -(0)[0:swapper] name: spm-reserve-memory, base: 0x9ffe0000, size: 0x10000
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node spm-reserve-memory, compatible id mediatek,spm-reserve-memory
[ 0.000000] -(0)[0:swapper][memblock]ram_console-reserve-memory: 0x43f00000 - 0x43f10000 (0x10000)
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node ram_console-reserved-memory@43f00000, compatible id mediatek,ram_console
[ 0.000000] -(0)[0:swapper][PHY layout]reserve-memory-ccci_md3 : 0xfe000000 - 0xfeafffff (0xb00000)
[ 0.000000] -(0)[0:swapper]modem_sdio_reserve_mem_of_init,uname:reserve-memory-ccci_md3,base:0xfe000000,size:0xb00000
[ 0.000000] -(0)[0:swapper]Reserved memory: initialized node reserve-memory-ccci_md3, compatible id mediatek,reserve-memory-ccci_md3
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0x40000000 - 0x42ffffff (0x3000000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0x43030000 - 0x9ffdffff (0x5cfb0000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0x9fff0000 - 0xbffbffff (0x1ffd0000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0xc0000000 - 0xf9ffffff (0x3a000000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0xfd810000 - 0xfdffffff (0x7f0000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0xfeb00000 - 0xff1fffff (0x700000)
[ 0.000000] -(0)[0:swapper][PHY layout]kernel : 0xff300000 - 0xff36ffff (0x70000)
[ 0.000000] -(0)[0:swapper]On node 0 totalpages: 765664
[ 0.000000] -(0)[0:swapper] DMA zone: 10709 pages used for memmap
[ 0.000000] -(0)[0:swapper] DMA zone: 0 pages reserved
[ 0.000000] -(0)[0:swapper] DMA zone: 765664 pages, LIFO batch:31
[ 0.000000] -(0)[0:swapper]psci: probing for conduit method from DT.
[ 0.000000] -(0)[0:swapper]psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] -(0)[0:swapper]PERCPU: Embedded 19 pages/cpu @ffffffc0bf108000 s40320 r8192 d29312 u77824
[ 0.000000] -(0)[0:swapper]pcpu-alloc: s40320 r8192 d29312 u77824 alloc=19*4096
[ 0.000000] -(0)[0:swapper]pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] -(0)[0:swapper]Detected VIPT I-cache on CPU0
[ 0.000000] -(0)[0:swapper]CPU features: enabling workaround for ARM errata 855873
[ 0.000000] -(0)[0:swapper]CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] -(0)[0:swapper]CPU features: enabling workaround for ARM erratum 855872
[ 0.000000] -(0)[0:swapper]Built 1 zonelists in Zone order, mobility grouping on. Total pages: 754955
[ 0.000000] -(0)[0:swapper][cpu_ntf] <00>ffffffc000177a04 (page_alloc_cpu_notify)
[ 0.000000] -(0)[0:swapper]Kernel command line: console=tty0 console=ttyMT0,921600n1 vmalloc=496M androidboot.hardware=mt6735 slub_max_order=0 slub_debug=OFZPU firmware_class.path=/vendor/firmware androidboot.verifiedbootstate=green skip_initramfs rootwait ro init=/init root=/dev/dm-0 dm="system none ro,0 1 android-verity PARTUUID=e195a981-e285-4734-8025-ec323e9589d9 " androidboot.veritymode=enforcing bootopt=64S3,32N2,64N2 buildvariant=userdebug veritykeyid=id:7e4333f9bba00adfe0ede979e28ed1920492b40f androidboot.atm=disabled androidboot.meta_log_disable=0 androidboot.dtbo_idx=0 printk.disable_uart=0 bootprof.pl_t=4417 bootprof.lk_t=3445 bootprof.logo_t=1116 boot_reason=4 androidboot.serialno=0123456789ABCDEF androidboot.bootreason=watchdog gpt=1 mrdump_ddrsv=yes
[ 0.000000] -(0)[0:swapper]dm: will configure 'system' on dm-0
[ 0.000000] -(0)[0:swapper]PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] -(0)[0:swapper]Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] -(0)[0:swapper]Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] -(0)[0:swapper]Memory: 2989664K/3062656K available (10413K kernel code, 1230K rwdata, 4040K rodata, 512K init, 5027K bss, 72992K reserved, 0K cma-reserved)
[ 0.000000] -(0)[0:swapper]Virtual kernel memory layout:\x0a vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)\x0a vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)\x0a 0xffffffbe00000000 - 0xffffffbe029d4080 ( 41 MB actual)\x0a PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)\x0a fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)\x0a modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)\x0a memory : 0xffffffc000000000 - 0xffffffc0bf370000 ( 3059 MB)\x0a .init : 0xffffffc000eaa000 - 0xffffffc000f2a000 ( 512 KB)\x0a .text : 0xffffffc000080000 - 0xffffffc000aad470 ( 10422 KB)\x0a .data : 0xffffffc000f66000 - 0xffffffc001099ab0 ( 1231 KB)
[ 0.000000] -(0)[0:swapper][cpu_ntf] <00>ffffffc0001b8c04 (slab_cpuup_callback)
[ 0.000000] -(0)[0:swapper]SLUB: HWalign=64, Order=0-0, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000d6d4c (sched_ilb_notifier)
[ 0.000000] -(0)[0:swapper/0]Preemptible hierarchical RCU implementation.
[ 0.000000] -(0)[0:swapper/0]\x09CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc000102664 (rcu_cpu_notify)
[ 0.000000] -(0)[0:swapper/0]\x0a**********************************************************
[ 0.000000] -(0)[0:swapper/0]** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] -(0)[0:swapper/0]** **
[ 0.000000] -(0)[0:swapper/0]** trace_printk() being used. Allocating extra memory. **
[ 0.000000] -(0)[0:swapper/0]** **
[ 0.000000] -(0)[0:swapper/0]** This means that this is a DEBUG kernel and it is **
[ 0.000000] -(0)[0:swapper/0]** unsafe for produciton use. **
[ 0.000000] -(0)[0:swapper/0]** **
[ 0.000000] -(0)[0:swapper/0]** If you see this message and you are not debugging **
[ 0.000000] -(0)[0:swapper/0]** the kernel, report this immediately to your vendor! **
[ 0.000000] -(0)[0:swapper/0]** **
[ 0.000000] -(0)[0:swapper/0]** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] -(0)[0:swapper/0]**********************************************************
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc0003504cc (radix_tree_callback)
[ 0.000000] -(0)[0:swapper/0]NR_IRQS:64 nr_irqs:64 0
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc000382acc (gic_secondary_init)
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc000109c98 (timer_cpu_notify)
[ 0.000000] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc00010b724 (hrtimer_cpu_notify)
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 1
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 2
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 3 rc fffffffe
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug return ERR_PTR(rc)
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 1
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 2
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 3 rc fffffffe
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug return ERR_PTR(rc)
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 1
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 2
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug 3 rc fffffffe
[ 0.000000] -(0)[0:swapper/0]of_clk_get debug return ERR_PTR(rc)
[ 0.000000] -(0)[0:swapper/0]cpuxgpt_r.start = 0x10200000
[ 0.000000] -(0)[0:swapper/0]mt_gpt_init: tmr_regs=0xffffff800000a000, tmr_irq=184, freq=13000000
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a010
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a020
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a030
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a040
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a050
[ 0.000000] -(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a060
[ 0.000000] -(0)[0:swapper/0]setup_clksrc1: dev->base_addr=0xffffff800000a020 GPT2_CON=0x0
[ 0.000000] -(0)[0:swapper/0]sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns
[ 0.000007] -(0)[0:swapper/0]setup_clksrc1: mt_cyclecounter.mult=0x99d89d8a mt_cyclecounter.shift=0x19
[ 0.000019] -(0)[0:swapper/0]setup_clksrc2: dev->base_addr=0xffffff800000a020 GPT2_CON=0x31
[ 0.000044] -(0)[0:swapper/0]GPT1_CMP = 130000, HZ = 100
[ 0.000114] -(0)[0:swapper/0]cpuxgpt_r.start = 0x10200000
[ 0.000134] -(0)[0:swapper/0]mt_gpt_init: get_cnt_GPT2=1693
[ 0.000181] -(0)[0:swapper/0]arch_timer_init:arch_timer_rate(0xc65d40),PHYS_SECURE_PPI=29,PHYS_NONSECURE_PPI=30,VIRT_PPI=27,HYP_PPI=26
[ 0.000194] -(0)[0:swapper/0]arch_timer_register:arch_timer_rate(0xc65d40),arch_timer_use_virtual=0
[ 0.000212] -(0)[0:swapper/0]arch_timer_register:request_percpu_irq PHYS_SECURE_PPI err=0
[ 0.000225] -(0)[0:swapper/0]arch_timer_register:request_percpu_irq PHYS_NONSECURE_PPI err=0
[ 0.000241] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc000417534 (arch_timer_cpu_notify)
[ 0.000501] -(0)[0:swapper/0]Architected cp15 timer(s) running at 13.00MHz (phys).
[ 0.001118] -(0)[0:swapper/0][cpu_ntf] <00>ffffffc000120168 (hotplug_cfd)
[ 0.123131] .(0)[0:swapper/0]console [ttyMT0] enabled
[ 0.123806] .(0)[0:swapper/0]ram_console: buffer start: 0xffffff800001c000, size: 0x10000
[ 0.132587] .(0)[0:swapper/0]Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.133879] .(0)[0:swapper/0]pid_max: default: 32768 minimum: 301
[ 0.134736] .(0)[0:swapper/0][cpu_ntf] <00>ffffffc0001f89fc (buffer_cpu_notify)
[ 0.135677] .(0)[0:swapper/0]Security Framework initialized
[ 0.136417] .(0)[0:swapper/0]SELinux: Initializing.
[ 0.137094] .(0)[0:swapper/0]SELinux: Starting in permissive mode
[ 0.137139] .(0)[0:swapper/0]Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.138190] .(0)[0:swapper/0]Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.139658] .(0)[0:swapper/0][cpu_ntf] <00>ffffffc00017e9e0 (ratelimit_handler)
[ 0.140871] .(0)[0:swapper/0]Initializing cgroup subsys freezer
[ 0.141644] .(0)[0:swapper/0]Initializing cgroup subsys debug
[ 0.142422] .(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000a2e74 (smpboot_thread_call)
[ 0.143696] .(0)[1:swapper/0]hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.144947] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000097484 (cpu_pmu_notify)
[ 0.145886] .(0)[1:swapper/0]ASID allocator initialised with 65536 entries
[ 0.146782] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000a78c4 (cpu_callback)
[ 0.164993] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000beb40 (workqueue_cpu_up_callback)
[ 0.166023] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000bee8c (workqueue_cpu_down_callback)
[ 0.225091] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000d08e8 (migration_call)
[ 0.226000] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000cd664 (sched_cpu_active)
[ 0.226933] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000cf1fc (sched_cpu_inactive)
[ 0.245102] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000161490 (hotplug_event_notify)
[ 0.250150] .(0)[1:swapper/0]BOOTPROF: 250.139845: ON
[ 0.251097] .(0)[1:swapper/0]init_get_max_DRAM_size done. phone_dram_sz: 0xc0000000, kernel_mem_sz: 0xc0000000
[ 0.252439] .(0)[1:swapper/0]devinfo size:50, tag size(devinfo_lk_atag_tag_devinfo_data):3, HRID size:2
[ 0.305340] -(1)[0:swapper/1]Detected VIPT I-cache on CPU1
[ 0.325597] -(2)[0:swapper/2]Detected VIPT I-cache on CPU2
[ 0.326267] -(3)[0:swapper/3]Detected VIPT I-cache on CPU3
[ 0.326933] -(4)[0:swapper/4]Detected VIPT I-cache on CPU4
[ 0.327600] -(5)[0:swapper/5]Detected VIPT I-cache on CPU5
[ 0.328259] -(6)[0:swapper/6]Detected VIPT I-cache on CPU6
[ 0.329036] -(7)[0:swapper/7]Detected VIPT I-cache on CPU7
[ 0.329184] .(4)[1:swapper/0]Brought up 8 CPUs
[ 0.334783] .(4)[1:swapper/0]SMP: Total of 8 processors activated (208.00 BogoMIPS).
[ 0.335844] -(0)[10:migration/0][name:alternative&]alternatives: patching kernel code
[ 0.339168] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc0000c788c (sched_domains_numa_masks_update)
[ 0.340267] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc0000d42e8 (cpuset_cpu_active)
[ 0.341208] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc0000d4358 (cpuset_cpu_inactive)
[ 0.342542] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0003c56d4 (device_hotplug_notifier)
[ 0.350262] .(0)[1:swapper/0][debug]available DRAM size = 0xc0000000\x0a[PHY layout]FB (dt) : 0xff370000 - 0xffffffff (0xc90000)
[ 0.352063] .(0)[1:swapper/0]\x0a register_restart_handler- 0xffffffc00153f820, Notify call: - 0xffffffc0007848c0
[ 0.353548] .(0)[1:swapper/0]ARCH_RESET register mtk_restart_handler ok!!!!
[ 0.355892] .(0)[1:swapper/0]pinctrl core: initialized pinctrl subsystem
[ 0.356993] .(0)[1:swapper/0]regulator-dummy: no parameters
[ 0.372325] .(0)[1:swapper/0]ramoops: using module parameters
[ 0.373167] .(0)[1:swapper/0]ramoops: pstore:address is 0x43f10000, size is 0xe0000, console_size is 0x10000, pmsg_size is 0x10000
[ 0.394599] .(3)[1:swapper/0]console [pstore-1] enabled
[ 0.395369] .(3)[1:swapper/0]pstore: Registered ramoops as persistent store backend
[ 0.396379] .(1)[1:swapper/0]ramoops: attached 0xe0000@0x43f10000, ecc: 0/0
[ 0.397293] .(1)[1:swapper/0]BOOTPROF: 397.287230:probe: probe=platform_drv_probe drv=ramoops(ffffffc000f98f70) 24.117923ms
[ 0.398850] .(1)[1:swapper/0]BOOTPROF: 398.845461:initcall: ramoops_init 26.521000ms
[ 0.400114] .(1)[1:swapper/0]#@# fsnotify(204) mask 0x100, file_name wakeup_sources
[ 0.401099] .(1)[1:swapper/0]------------[ cut here ]------------
[ 0.401899] .(1)[1:swapper/0]WARNING: CPU: 1 PID: 1 at /usr/src/p0/kernel-3.18/fs/notify/fsnotify.c:205 fsnotify+0x384/0x3ac()
[ 0.403348] .(1)[1:swapper/0]Modules linked in:
[ 0.403732] -(1)[1:swapper/0]CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.119 #1
[ 0.404705] -(1)[1:swapper/0]Hardware name: MT6753 (DT)
[ 0.405389] -(1)[1:swapper/0]Call trace:
[ 0.405916] -(1)[1:swapper/0][<ffffffc00008bb44>] dump_backtrace+0x0/0x1d0
[ 0.406806] -(1)[1:swapper/0][<ffffffc00008bd28>] show_stack+0x14/0x1c
[ 0.407651] -(1)[1:swapper/0][<ffffffc000a9c650>] dump_stack+0x90/0xb8
[ 0.408500] -(1)[1:swapper/0][<ffffffc0000a28e4>] warn_slowpath_null+0x6c/0xb4
[ 0.409433] -(1)[1:swapper/0][<ffffffc000205120>] fsnotify+0x384/0x3ac
[ 0.410281] -(1)[1:swapper/0][<ffffffc0002ce9f8>] debugfs_create_file+0xcc/0x174
[ 0.411235] -(1)[1:swapper/0][<ffffffc000ed5d64>] wakeup_sources_debugfs_init+0x28/0x3c
[ 0.412266] -(1)[1:swapper/0][<ffffffc000082a5c>] do_one_initcall+0xc4/0x1f4
[ 0.413179] -(1)[1:swapper/0][<ffffffc000eaac1c>] kernel_init_freeable+0x138/0x1d8
[ 0.414156] -(1)[1:swapper/0][<ffffffc000a96ed4>] kernel_init+0x18/0x150
[ 0.415062] .(3)[1:swapper/0]---[ end trace 5d0550754f78e693 ]---
[ 0.415880] .(0)[1:swapper/0]BOOTPROF: 415.874000:initcall: wakeup_sources_debugfs_init 15.782616ms
[ 0.417201] .(0)[1:swapper/0][PWRAP] mt_pwrap_init
[ 0.418184] .(0)[1:swapper/0]PWRAP reg: 0xffffff80001c6000, irq: 195
[ 0.419016] .(0)[1:swapper/0][PWRAP] real init: version Revision
[ 0.419796] .(0)[1:swapper/0][PWRAP] mt_pwrap_init---- debug1
[ 0.420744] .(0)[1:swapper/0][PWRAP] is_pwrap_init_done 1
[ 0.421472] .(0)[1:swapper/0][PWRAP] after MT6328 pwrap_write
[ 0.422227] .(0)[1:swapper/0][PWRAP] Read Test,rdata=0x5aa5, exp=0x5aa5,return_value=0x0
[ 0.423265] .(0)[1:swapper/0][PWRAP] mt_pwrap_init----
[ 0.423980] .(0)[1:swapper/0][GPIO] 668: GPIO base addr is 0xffffff80001cc000, get_gpio_vbase_early
[ 0.425289] .(0)[1:swapper/0][DRAMC]get CQDMA_BASE_ADDR @ ffffff80001d0c00
[ 0.426239] .(0)[1:swapper/0][DRAMC]get DRAMCAO_BASE_ADDR @ ffffff80001ce000
[ 0.427178] .(0)[1:swapper/0][DRAMC]get DDRPHY_BASE_ADDR @ ffffff80001d4000
[ 0.428104] .(0)[1:swapper/0][DRAMC]get DRAMCNAO_BASE_ADDR @ ffffff80001d6000
[ 0.429249] .(3)[1:swapper/0][DFS] rsv memory from LK node
[ 0.429975] .(3)[1:swapper/0][DRAMC]find dt_scan_dram_info
[ 0.430737] .(3)[1:swapper/0][DRAMC Driver] Dram Data Rate = 1466
[ 0.431527] .(3)[1:swapper/0][DRAMC Driver] dram can support Frequency Hopping
[ 0.432637] .(3)[1:swapper/0]mtk_wdt_init ok
[ 0.448874] .(3)[1:swapper/0]cpuidle: using governor mtk_governor
[ 0.449676] .(3)[1:swapper/0]BOOTPROF: 449.671231:initcall: init_mtk_governor 16.459461ms
[ 0.451649] .(3)[1:swapper/0]vdso: 2 pages (1 code @ ffffffc000ab1000, 1 data @ ffffffc000f6d000)
[ 0.452827] .(3)[1:swapper/0]hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.454365] .(3)[1:swapper/0]software IO TLB [mem 0xf7000000-0xf7200000] (2MB) mapped at [ffffffc0b7000000-ffffffc0b71fffff]
[ 0.455933] .(3)[1:swapper/0]DMA: preallocated 256 KiB pool for atomic allocations
[ 0.456952] .(3)[1:swapper/0]success to create gic debug driver
[ 0.457722] .(3)[1:swapper/0]success to create dump_irq sysfs files
[ 0.458650] .(3)[1:swapper/0][EIC] no mediatek,max_hw_deb_cnt specified
[ 0.459521] .(3)[1:swapper/0][EIC] setup default value
[ 0.460204] .(3)[1:swapper/0][EIC] no built in eint hw deb property
[ 0.461015] .(3)[1:swapper/0][EIC] no builtin_entry property
[ 0.461755] .(3)[1:swapper/0][EIC] debtime_setting: entry=10, spec=0, len=20
[ 0.464457] .(3)[1:swapper/0][SPM] find SCP_I2C0 node failed
[ 0.465194] .(3)[1:swapper/0][SPM] base scp_i2c0_base failed
[ 0.466096] .(3)[1:swapper/0][SPM] find SCP_I2C1 node failed
[ 0.466830] .(3)[1:swapper/0][SPM] base scp_i2c1_base failed
[ 0.467722] .(3)[1:swapper/0][SPM] find SCP_I2C2 node failed
[ 0.468456] .(3)[1:swapper/0][SPM] base scp_i2c2_base failed
[ 0.469197] .(3)[1:swapper/0][SPM] spm_base = ffffff8000248000, scp_i2c0_base = (null), scp_i2c1_base = (null), scp_i2c2_base = (null)
[ 0.471077] .(3)[1:swapper/0][SPM] spm_irq_0 = 197, spm_irq_1 = 198, spm_irq_2 = 199, spm_irq_3 = 200
[ 0.472673] -(3)[1:swapper/0][Power/cpufreq] [WARNING]pmic table not initialized
[ 0.473848] -(3)[1:swapper/0][SPM] [VcoreFS] SLEEP_DVFS_STA: 0x202
[ 0.474648] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_SRC_REQ : 0x2
[ 0.475428] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG13_DATA: 0x20041038
[ 0.476285] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG12_DATA: 0x0
[ 0.477066] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG12_MASK: 0x801001
[ 0.477902] -(3)[1:swapper/0][SPM] [VcoreFS] AP_STANBY_CON : 0x24000000
[ 0.478759] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_IM_PTR : 0x40b236f0 (285)
[ 0.479680] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG6_DATA : 0x1000100
[ 0.480526] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG11_DATA: 0x0
[ 0.481307] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG0_DATA : 0x0
[ 0.482088] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG1_DATA : 0x1
[ 0.482869] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG2_DATA : 0x0
[ 0.483650] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG3_DATA : 0x801001
[ 0.484485] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG4_DATA : 0x202
[ 0.485288] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG5_DATA : 0x1
[ 0.486068] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG7_DATA : 0x60015830
[ 0.486925] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG8_DATA : 0x10006608
[ 0.487782] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG9_DATA : 0x0
[ 0.488562] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG10_DATA: 0x0
[ 0.489344] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG14_DATA: 0x90100000
[ 0.490201] -(3)[1:swapper/0][SPM] [VcoreFS] PCM_REG15_DATA: 42
[ 0.490972] -(3)[1:swapper/0][SPM] [VcoreFS] STA: 0x202, REQ: 0x2
[ 0.492732] .(1)[1:swapper/0][Power/clkmgr] [mt_subsys_init]SYS_MD1, change state: (1->0)
[ 0.494192] .(1)[1:swapper/0][Power/clkmgr] [00][CG_INFRA]=[0x0000008a]
[ 0.495049] .(1)[1:swapper/0][Power/clkmgr] [01][CG_PERI ]=[0x7fc1fffc]
[ 0.495921] .(1)[1:swapper/0][Power/clkmgr] [02][CG_DISP0]=[0xfff96bfc][0xfff96bfc]
[ 0.496908] .(1)[1:swapper/0][Power/clkmgr] [03][CG_DISP1]=[0xfffffff3]
[ 0.497764] .(1)[1:swapper/0][Power/clkmgr] [04][CG_IMAGE]=[0x00000fff]
[ 0.498621] .(1)[1:swapper/0][Power/clkmgr] [05][CG_MFG ]=[0x00000001]
[ 0.499478] .(1)[1:swapper/0][Power/clkmgr] [06][CG_AUDIO]=[0x0f0c0344]
[ 0.500335] .(1)[1:swapper/0][Power/clkmgr] [07][CG_VDEC0]=[0x00000010][0x00000010]
[ 0.501322] .(1)[1:swapper/0][Power/clkmgr] [08][CG_VDEC1]=[0x00000000][0x00000000]
[ 0.502308] .(1)[1:swapper/0][Power/clkmgr] [09][CG_VENC ]=[0x00000000]
[ 0.503165] .(1)[1:swapper/0]mt_clkmgr_init: CLKMGR_INCFILE_VER=CLKMGR_INCFILE_D3_LEGACY
[ 0.504236] .(1)[1:swapper/0]BOOTPROF: 504.230231:initcall: mt_power_management_init 40.595077ms
[ 0.505505] .(0)[1:swapper/0][PTP] [PTP][VCORE] - Kernel Got from DT (0x5A, 0x58, 0x0, 0x0)
[ 0.506748] .(2)[1:swapper/0]### CIRQ init done. ###
[ 0.507439] .(2)[1:swapper/0]Register the disp driver
[ 0.508335] .(2)[1:swapper/0][DISP]init_log_buffer success
[ 0.509222] .(2)[1:swapper/0]\x0a MTK_SIP_KERNEL_WDT - 0xffffffc0006a94f8
[ 0.510279] .(2)[1:swapper/0]\x0a atf_aee_debug_virt_addr = 0xffffff8000278000
[ 0.516604] .(1)[1:swapper/0]mirdump: reserved 43ff0000+3000->ffffff800027d000
[ 0.520099] .(1)[1:swapper/0]******** MTK WDT driver probe!! ********
[ 0.530441] .(0)[1:swapper/0]mt6735 pinctrl probe
[ 0.531061] .(0)[1:swapper/0]mtk_pctrl_init++++++
[ 0.537033] .(1)[1:swapper/0]BOOTPROF: 537.025615:initcall: arm64_device_init 19.641616ms
[ 0.539521] .(1)[1:swapper/0]------------[ cut here ]------------
[ 0.540319] .(1)[1:swapper/0]WARNING: CPU: 1 PID: 1 at /usr/src/p0/kernel-3.18/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
[ 0.541738] .(1)[1:swapper/0]sysfs: cannot create duplicate filename '/module/c2k_sdio/version'
[ 0.542853] .(1)[1:swapper/0]Modules linked in:
[ 0.543239] -(1)[1:swapper/0]CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.18.119 #1
[ 0.544353] -(1)[1:swapper/0]Hardware name: MT6753 (DT)
[ 0.545036] -(1)[1:swapper/0]Call trace:
[ 0.545563] -(1)[1:swapper/0][<ffffffc00008bb44>] dump_backtrace+0x0/0x1d0
[ 0.546455] -(1)[1:swapper/0][<ffffffc00008bd28>] show_stack+0x14/0x1c
[ 0.547301] -(1)[1:swapper/0][<ffffffc000a9c650>] dump_stack+0x90/0xb8
[ 0.548148] -(1)[1:swapper/0][<ffffffc0000a2c54>] warn_slowpath_fmt+0xc8/0x100
[ 0.549081] -(1)[1:swapper/0][<ffffffc00023b9e8>] sysfs_warn_dup+0x64/0x84
[ 0.549970] -(1)[1:swapper/0][<ffffffc00023b6e0>] sysfs_add_file_mode_ns+0x124/0x184
[ 0.550968] -(1)[1:swapper/0][<ffffffc00023b768>] sysfs_create_file_ns+0x28/0x64
[ 0.551923] -(1)[1:swapper/0][<ffffffc000eb23f0>] param_sysfs_init+0xb8/0x22c
[ 0.552845] -(1)[1:swapper/0][<ffffffc000082a5c>] do_one_initcall+0xc4/0x1f4
[ 0.553758] -(1)[1:swapper/0][<ffffffc000eaac1c>] kernel_init_freeable+0x138/0x1d8
[ 0.554735] -(1)[1:swapper/0][<ffffffc000a96ed4>] kernel_init+0x18/0x150
[ 0.555640] .(0)[1:swapper/0]---[ end trace 5d0550754f78e694 ]---
[ 0.568330] .(0)[1:swapper/0]BOOTPROF: 568.323846:initcall: param_sysfs_init 28.882615ms
[ 0.595458] .(4)[1:swapper/0]BOOTPROF: 595.450923:initcall: pm_sysrq_init 25.947615ms
[ 0.597319] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000333388 (blk_cpu_notify)
[ 0.598247] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000333b74 (blk_iopoll_cpu_notify)
[ 0.599245] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000339c94 (blk_mq_main_cpu_notify)
[ 0.600243] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0003370e4 (blk_mq_queue_reinit_notify)
[ 0.602004] .(0)[1:swapper/0]M4Um4u_probe 2, of_iomap: 0xffffff800028a000, irq_num: 178, pDev: ffffffc0032c6410
[ 0.603352] .(0)[1:swapper/0]M4U4G DRAM Mode is: 0
[ 0.604335] .(0)[1:swapper/0]M4Urequest_irq, irq_num=178
[ 0.605035] .(0)[1:swapper/0]M4Uconfig_port:MDP_RDMA,v1,s0
[ 0.605787] .(0)[1:swapper/0]M4Uconfig_port:MDP_WDMA,v1,s0
[ 0.606507] .(0)[1:swapper/0]M4Uconfig_port:MDP_WROT,v1,s0
[ 0.607575] .(0)[1:swapper/0][GPIO] 649: GPIO base addr is 0xffffff80001cc000, get_gpio_vbase
[ 0.609243] .(0)[1:swapper/0][CMDQ][CMDQ] platform_dev: dev: ffffffc00329fc10, PA: 10217000, VA: ffffff800029a000, irqId: 183, irqSecId:180
[ 0.610848] .(0)[1:swapper/0][CMDQ]set dma mask result: 0
[ 0.611618] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mmsys_config): 0xffffff800029c000
[ 0.612690] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rdma): 0xffffff800029e000
[ 0.613719] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rsz0): 0xffffff80002a0000
[ 0.614747] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rsz1): 0xffffff80002a2000
[ 0.615794] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_wdma): 0xffffff80002a4000
[ 0.616824] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_wrot): 0xffffff80002a6000
[ 0.617852] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_tdshp): 0xffffff80002a8000
[ 0.619083] .(0)[1:swapper/0][CMDQ]DEV: VA(mediatek,VENC): 0x0
[ 0.621002] .(0)[1:swapper/0][CMDQ][ERR]DEV: init mm_mutex PA fail!!
[ 0.624316] .(0)[1:swapper/0][Power/clkmgr] register_larb_monitor
[ 0.626265] .(0)[1:swapper/0][ccci0/util]Using default META MD setting[0][0]
[ 0.628960] .(4)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init message queue list succeed
[ 0.630017] .(4)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init active queue list succeed
[ 0.631057] .(4)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init user information list succeed
[ 0.632197] .(4)[1:swapper/0][CONN_MD_DMP][I]conn_md_dmp_init:alloc memory for msg log system done, size:0x00000430
[ 0.633532] .(4)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:conn_md_dmp_init succeed
[ 0.634637] .(0)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:create conn_md_thread succeed, wakeup it
[ 0.636121] .(0)[1:swapper/0]SCSI subsystem initialized
[ 0.636922] .(0)[1:swapper/0]usbcore: registered new interface driver usbfs
[ 0.637862] .(0)[1:swapper/0]usbcore: registered new interface driver hub
[ 0.638873] .(0)[1:swapper/0]usbcore: registered new device driver usb
[ 0.640605] .(0)[1:swapper/0]Advanced Linux Sound Architecture Driver Initialized.
[ 0.641937] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc0008f0e84 (dev_cpu_callback)
[ 0.643201] .(0)[1:swapper/0]------------[ cut here ]------------
[ 0.643999] .(0)[1:swapper/0]WARNING: CPU: 0 PID: 1 at /usr/src/p0/kernel-3.18/net/wireless/reg.c:511 regulatory_init+0x9c/0x1e0()
[ 0.645492] .(0)[1:swapper/0]db.txt is empty, you should update it...
[ 0.646114] .(0)[1:swapper/0]Modules linked in:
[ 0.646702] .(0)[1:swapper/0]
[ 0.646912] -(0)[1:swapper/0]CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.119 #1
[ 0.648027] -(0)[1:swapper/0]Hardware name: MT6753 (DT)
[ 0.648710] -(0)[1:swapper/0]Call trace:
[ 0.649238] -(0)[1:swapper/0][<ffffffc00008bb44>] dump_backtrace+0x0/0x1d0
[ 0.650128] -(0)[1:swapper/0][<ffffffc00008bd28>] show_stack+0x14/0x1c
[ 0.650974] -(0)[1:swapper/0][<ffffffc000a9c650>] dump_stack+0x90/0xb8
[ 0.651822] -(0)[1:swapper/0][<ffffffc0000a2c54>] warn_slowpath_fmt+0xc8/0x100
[ 0.652756] -(0)[1:swapper/0][<ffffffc000effe40>] regulatory_init+0x9c/0x1e0
[ 0.653668] -(0)[1:swapper/0][<ffffffc000effd28>] cfg80211_init+0x74/0xf0
[ 0.654546] -(0)[1:swapper/0][<ffffffc000082a5c>] do_one_initcall+0xc4/0x1f4
[ 0.655459] -(0)[1:swapper/0][<ffffffc000eaac1c>] kernel_init_freeable+0x138/0x1d8
[ 0.656436] -(0)[1:swapper/0][<ffffffc000a96ed4>] kernel_init+0x18/0x150
[ 0.657336] .(1)[1:swapper/0]---[ end trace 5d0550754f78e695 ]---
[ 0.658263] .(1)[13:kworker/1:0]cfg80211: Calling CRDA to update world regulatory domain
[ 0.658309] .(0)[1:swapper/0]BOOTPROF: 658.302846:initcall: cfg80211_init 15.305692ms
[ 0.661350] .(0)[1:swapper/0]Switched to clocksource mt6735-gpt
[ 0.685999] .(0)[1:swapper/0]BOOTPROF: 685.988847:initcall: event_trace_init 23.150538ms
[ 0.688378] .(0)[1:swapper/0] pimix=170
[ 0.689686] .(4)[1:swapper/0]vtcxo_1: 2800 mV
[ 0.690827] .(4)[1:swapper/0]vaud28: 2800 mV
[ 0.691560] .(4)[1:swapper/0]vcn28: 2800 mV
[ 0.692232] .(4)[1:swapper/0]vcama: 1500 <--> 2800 mV at 2800 mV
[ 0.693155] .(4)[1:swapper/0]vcn33_bt: 3300 <--> 3600 mV at 3300 mV
[ 0.694100] .(4)[1:swapper/0]vcn33_wifi: 3300 <--> 3600 mV at 3300 mV
[ 0.695488] .(4)[1:swapper/0]vusb33: 3300 mV
[ 0.696591] .(4)[1:swapper/0]vemc_3v3: 1800 <--> 3300 mV at 3000 mV
[ 0.697575] .(4)[1:swapper/0]vmch: 2900 <--> 3300 mV at 2900 mV
[ 0.698487] .(4)[1:swapper/0]vmc: 1800 <--> 3300 mV at 2900 mV
[ 0.699378] .(4)[1:swapper/0]vcamaf: 1200 <--> 3300 mV at 2800 mV
[ 0.700319] .(4)[1:swapper/0]vgp1: 1200 <--> 3300 mV at 1800 mV
[ 0.701224] .(4)[1:swapper/0]vibr: 1200 <--> 3300 mV at 2800 mV
[ 0.702188] .(4)[1:swapper/0]vcamd: 900 <--> 1500 mV at 1300 mV
[ 0.703093] .(4)[1:swapper/0]vrf18_1: 1200 <--> 1825 mV at 1800 mV
[ 0.704028] .(4)[1:swapper/0]vcn18: 1800 mV
[ 0.704704] .(4)[1:swapper/0]vcamio: 1200 <--> 1800 mV at 1800 mV
[ 0.706007] .(4)[1:swapper/0]vsram: 700 <--> 1493 mV at 1350 mV
[ 0.707336] .(4)[1:swapper/0]vm: 1240 <--> 1540 mV at 1240 mV
[ 0.708269] .(4)[1:swapper/0]Reg[0xec2]=0x8a12, Reg[0xec4]=0xb9a1, Reg[0x2ac]=0x8f
[ 0.709245] .(4)[1:swapper/0][low_battery_protect_init] 3400 mV, 3250 mV, 3100 mV
[ 0.710255] .(4)[1:swapper/0]Reg[0xcd2]=0xc933, Reg[0xcd4]=0xbf75, Reg[0x2b8]=0x840
[ 0.711239] .(4)[1:swapper/0][battery_oc_protect_init] 4670 mA, 5500 mA
[ 0.712271] .(0)[1:swapper/0]Create bat_percent_notify_thread : done
[ 0.713212] .(4)[1:swapper/0]Create dlpt_notify_thread : done
[ 0.713983] .(4)[1:swapper/0]POWER_UVLO_VOLT_LEVEL=2600, [0xf6a]=0x2
[ 0.715195] .(4)[1:swapper/0]BOOTPROF: 715.188539:probe: probe=platform_drv_probe drv=mt-pmic(ffffffc000fc0408) 27.016539ms
[ 0.717327] .(4)[1:swapper/0][PMIC]pmic_mt_cust_probe done
[ 0.718114] .(4)[1:swapper/0]BOOTPROF: 718.108231:initcall: pmic_mt_init 30.208308ms
[ 0.719813] .(4)[1:swapper/0][MUSB]mt_usb_dts_probe 1524: first_connect, check_delay_done to 0
[ 0.720920] .(4)[1:swapper/0][MUSB]mt_usb_dts_probe 1528: set musb_connect_legacy to 0
[ 0.721985] .(4)[1:swapper/0][MUSB]mt_usb_dts_probe 1530: init connection_work
[ 0.722917] .(4)[1:swapper/0][MUSB]mt_usb_dts_probe 1532: keep musb->power & mtk_usb_power in the samae value
[ 0.724591] .(4)[1:swapper/0][MUSB]mt_usb_probe 1492: USB probe done!
[ 0.725971] .(0)[1:swapper/0][name:mt_mmc_block&][BLOCK_TAG] DRAM: 0x0000000040000000 - 0x00000000ff370000, size: 0xbf370000
[ 0.725994] .(0)[1:swapper/0][ION]ion_init()
[ 0.726806] .(0)[1:swapper/0][ION]ion_drv_probe() heap_nr=5
[ 0.728093] .(4)[1:swapper/0][ION]ion_sec_heap_create error: not support
[ 0.728966] .(4)[1:swapper/0]ion_mtk_heap_create: error creating heap ion_sec_heap type 13 base 0 size 0
[ 0.731235] .(5)[1:swapper/0]TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.732786] .(5)[1:swapper/0]TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.734527] .(5)[1:swapper/0]TCP: Hash tables configured (established 32768 bind 32768)
[ 0.735617] .(5)[1:swapper/0]TCP: reno registered
[ 0.736243] .(5)[1:swapper/0]UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.737317] .(5)[1:swapper/0]UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.742349] .(0)[1:swapper/0]futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.743432] .(0)[1:swapper/0]Initialise system trusted keyring
[ 0.744263] .(0)[1:swapper/0]audit: initializing netlink subsys (disabled)
[ 0.745196] .(0)[1:swapper/0]audit: type=2000 audit(0.720:1): initialized
[ 0.746558] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc000184ad8 (cpu_callback)
[ 0.752775] .(0)[1:swapper/0]VFS: Disk quotas dquot_6.5.2
[ 0.753606] .(0)[1:swapper/0]Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.755976] .(0)[1:swapper/0]Registering sdcardfs 0.1
[ 0.756906] .(0)[1:swapper/0]fuse init (API version 7.23)
[ 0.758045] .(4)[1:swapper/0]SELinux: Registering netfilter hooks
[ 0.761069] .(0)[1:swapper/0]Key type asymmetric registered
[ 0.761838] .(0)[1:swapper/0]Asymmetric key parser 'x509' registered
[ 0.762696] .(0)[1:swapper/0]io scheduler noop registered
[ 0.763407] .(0)[1:swapper/0]io scheduler deadline registered
[ 0.764336] .(0)[1:swapper/0]io scheduler cfq registered (default)
[ 0.765196] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc00037651c (percpu_counter_hotcpu_callback)
[ 0.769801] .(0)[1:swapper/0]loop: module loaded
[ 0.770716] .(0)[1:swapper/0]zram: Created 1 device(s) ...
[ 0.771474] .(0)[1:swapper/0][EMI MPU] Initialize EMI MPU.
[ 0.772405] .(0)[1:swapper/0]get EMI_BASE_ADDR @ ffffff8000da4000
[ 0.773312] .(0)[1:swapper/0][EMI MPU] EMI_MPUP = 0x2
[ 0.773971] .(0)[1:swapper/0][EMI MPU] EMI_MPUQ = 0x0
[ 0.774632] .(0)[1:swapper/0][EMI MPU] EMI_MPUR = 0x0
[ 0.775294] .(0)[1:swapper/0][EMI MPU] EMI_MPUY = 0x0
[ 0.775955] .(0)[1:swapper/0][EMI MPU] EMI_MPUP2 = 0x0
[ 0.776628] .(0)[1:swapper/0][EMI MPU] EMI_MPUQ2 = 0x0
[ 0.777300] .(0)[1:swapper/0][EMI MPU] EMI_MPUR2 = 0x0
[ 0.777973] .(0)[1:swapper/0][EMI MPU] EMI_MPUY2 = 0x0
[ 0.778645] .(0)[1:swapper/0][EMI MPU] EMI_MPUS = 0x20010820
[ 0.779383] .(0)[1:swapper/0][EMI MPU] EMI_MPUT = 0x300a130
[ 0.780109] .(0)[1:swapper/0][EMI MPU] EMI_WP_ADR = 0x0
[ 0.780793] .(0)[1:swapper/0][EMI MPU] EMI_WP_CTRL = 0x0
[ 0.781504] .(0)[1:swapper/0][EMI MPU] EMI_CHKER = 0x0
[ 0.782173] .(0)[1:swapper/0][EMI MPU] EMI_CHKER_TYPE = 0x0
[ 0.782900] .(0)[1:swapper/0][EMI MPU] EMI_CHKER_ADR = 0x0
[ 0.783619] .(0)[1:swapper/0]EMI_DAPC Init start
[ 0.784297] .(0)[1:swapper/0][DEVAPC] AO_ADDRESS ffffff8000da6000
[ 0.785189] .(0)[1:swapper/0][DEVAPC] PD_ADDRESS ffffff8000da8000, IRD: 166
[ 0.786089] .(0)[1:swapper/0]EMI_DAPC Init done
[ 0.786683] .(0)[1:swapper/0][EMI MPU] Not 4G mode
[ 0.787334] .(0)[1:swapper/0][EMI] EMI_CONA = 0x2a0a2
[ 0.788004] .(0)[1:swapper/0][EMI] Support channel number 2
[ 0.788731] .(0)[1:swapper/0][EMI] Channel 0 : rank 0 : 12 Gb, segment no : 6
[ 0.789653] .(0)[1:swapper/0][EMI] Channel 0 : rank 1 : 12 Gb, segment no : 6
[ 0.790574] .(0)[1:swapper/0][EMI] Channel 1 : rank 0 : 0 Gb, segment no : 0
[ 0.791524] .(0)[1:swapper/0][EMI] Channel 1 : rank 1 : 0 Gb, segment no : 0
[ 0.792824] .(4)[1:swapper/0]BOOTPROF: 792.815924:initcall: emi_mpu_mod_init 21.334769ms
[ 0.794568] .(4)[1:swapper/0][register_dlpt_notify] prio_val=0
[ 0.795440] .(0)[1:swapper/0][PBM] pbm_module_init : Done
[ 0.796168] .(0)[1:swapper/0][VcoreFS] OPP 0: vcore_uv: 1162500, ddr_khz: 1466000
[ 0.797132] .(0)[1:swapper/0][VcoreFS] OPP 1: vcore_uv: 1150000, ddr_khz: 1313000
[ 0.798097] .(0)[1:swapper/0][VcoreFS] curr_vcore_uv: 1250000, curr_ddr_khz: 1466000
[ 0.799101] .(0)[1:swapper/0][VcoreFS] HPM : 1162500 (0x5a)
[ 0.799846] .(0)[1:swapper/0][VcoreFS] TRANS2: 1158332 (0x5a)
[ 0.800594] .(0)[1:swapper/0][VcoreFS] TRANS1: 1154166 (0x59)
[ 0.801366] .(0)[1:swapper/0][VcoreFS] LPM : 1150000 (0x58)
[ 0.802164] .(0)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_init
[ 0.803249] .(0)[1:swapper/0][Power/gpufreq] setup gpufreqs table
[ 0.804373] .(0)[1:swapper/0][Power/gpufreq] GPU clock-frequency from DT = 450 MHz
[ 0.805348] .(0)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: mmpll_spd_bond = 0x6
[ 0.806507] .(0)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: gpu_550m_enable = 0
[ 0.807657] .(0)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: efuse_spare2 = 0x3
[ 0.808797] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs[0].gpufreq_khz = 448500
[ 0.809750] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs[0].gpufreq_volt = 115000
[ 0.810716] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs[1].gpufreq_khz = 299000
[ 0.811687] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs[1].gpufreq_volt = 115000
[ 0.812652] .(0)[1:swapper/0][Power/gpufreq] @_mt_setup_gpufreqs_power_table: temp = 0
[ 0.813672] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_khz = 448500
[ 0.814689] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_volt = 115000
[ 0.815719] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_power = 1105
[ 0.816739] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_khz = 299000
[ 0.817758] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_volt = 115000
[ 0.818788] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_power = 746
[ 0.819798] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_khz = 299000
[ 0.820817] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_volt = 115000
[ 0.821861] .(0)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_power = 746
[ 0.822877] .(0)[1:swapper/0][Power/gpufreq] [ERROR]Set to LPM since GPU idx not found according to current Vcore = 1250 mV
[ 0.824355] .(0)[1:swapper/0][Power/gpufreq] GPU current frequency = 299000KHz
[ 0.825290] .(0)[1:swapper/0][Power/gpufreq] Current Vcore = 1250mV
[ 0.826099] .(0)[1:swapper/0][Power/gpufreq] g_cur_gpu_OPPidx = 1
[ 0.827003] .(4)[1:swapper/0][register_low_battery_notify] prio_val=2
[ 0.827841] .(4)[1:swapper/0][register_battery_percent_notify] prio_val=2
[ 0.828733] .(4)[1:swapper/0]BOOTPROF: 828.726847:probe: probe=platform_drv_probe drv=mt-gpufreq(ffffffc000fb6240) 25.487231ms
[ 0.830328] .(4)[1:swapper/0]BOOTPROF: 830.323155:initcall: _mt_gpufreq_init 28.156923ms
[ 0.831512] .(4)[1:swapper/0][HPS] hps_init
[ 0.832063] .(4)[1:swapper/0][HPS] hps_cpu_init
[ 0.832662] .(4)[1:swapper/0][HPS] hps_ctxt.little_cpumask: 0-7
[ 0.833429] .(4)[1:swapper/0][HPS] hps_ctxt.big_cpumask:
[ 0.834137] .(4)[1:swapper/0][HPS] hps_cpu_init: little_cpu_id_min: 0, little_cpu_id_max: 7, big_cpu_id_min: 0, big_cpu_id_max: 0
[ 0.835620] .(4)[1:swapper/0][HPS] hps_core_init
[ 0.836336] .(0)[1:swapper/0][HPS] hps_task_start success, ptr: ffffffc0b72c5000, pid: 117
[ 0.836352] .(4)[117:hps_main][HPS] hps_ctxt.init_state: 0
[ 0.836356] .(4)[117:hps_main][HPS] hps_ctxt.state: 0
[ 0.836360] .(4)[117:hps_main][HPS] hps_ctxt.enabled: 1
[ 0.836364] .(4)[117:hps_main][HPS] hps_ctxt.suspend_enabled: 1
[ 0.836368] .(4)[117:hps_main][HPS] hps_ctxt.is_hmp: 0
[ 0.836372] .(4)[117:hps_main][HPS] hps_ctxt.little_cpu_id_min: 0
[ 0.836376] .(4)[117:hps_main][HPS] hps_ctxt.little_cpu_id_max: 7
[ 0.836380] .(4)[117:hps_main][HPS] hps_ctxt.big_cpu_id_min: 0
[ 0.836384] .(4)[117:hps_main][HPS] hps_ctxt.big_cpu_id_max: 0
[ 0.844033] .(0)[1:swapper/0][HPS] hps_procfs_init
[ 0.844987] .(0)[1:swapper/0][HPS] hps_probe
[ 0.845661] .(0)[1:swapper/0]MT_SCHED: Init complete, device major number = 246
[ 0.846620] .(0)[1:swapper/0][cpu_ntf] <00>ffffffc000413db4 (sched_cpu_notify)
[ 0.848170] .(0)[1:swapper/0]11002000.apuart0: ttyMT0 at MMIO 0x11002000 (irq = 123, base_baud = 1625000) is a MTK UART
[ 0.850029] .(0)[1:swapper/0]11003000.apuart1: ttyMT1 at MMIO 0x11003000 (irq = 124, base_baud = 1625000) is a MTK UART
[ 0.851900] .(0)[1:swapper/0]11004000.apuart2: ttyMT2 at MMIO 0x11004000 (irq = 125, base_baud = 1625000) is a MTK UART
[ 0.853751] .(0)[1:swapper/0]11005000.apuart3: ttyMT3 at MMIO 0x11005000 (irq = 126, base_baud = 1625000) is a MTK UART
[ 0.855307] .(0)[1:swapper/0]1100d000.apuart4: ttyMT4 at MMIO 0x1100d000 (irq = 127, base_baud = 1625000) is a MTK UART
[ 0.858037] .(0)[1:swapper/0][MT AUXADC_probe3] get device tree info : start !!
[ 0.859021] .(0)[1:swapper/0][AUXADC_AP] find node TEMPERATURE:0
[ 0.859800] .(0)[1:swapper/0][AUXADC_AP] find node TEMPERATURE1:1
[ 0.860592] .(0)[1:swapper/0][AUXADC_AP] find node ADC_FDD_RF_PARAMS_DYNAMIC_CUSTOM_CH:12
[ 0.861667] .(0)[1:swapper/0][MT AUXADC_AP] adc_channel_info_init : done !!
[ 0.862582] .(0)[1:swapper/0]proc_create auxadc_debug_proc_fops
[ 0.863476] .(0)[1:swapper/0]mt-auxadc: probe of 11001000.adc_hw failed with error -22
[ 0.865972] .(0)[1:swapper/0] mt_i2c_init driver us DT
[ 0.866731] .(0)[1:swapper/0] mt_i2c_init driver us platform device
[ 0.867723] .(0)[1:swapper/0] mt_i2c_probe+++++++++++++++++
[ 0.868479] .(0)[1:swapper/0]reg: 0xffffff8000db4000, irq: 0x116, id: 0
[ 0.869399] .(0)[1:swapper/0] id: 0, reg: 0xffffff8000db4000, dma_reg: 0xffffff8000db2180, irq: 116
[ 0.870577] .(0)[1:swapper/0]i2c-bus0 speed is 100Khz
[ 0.872393] .(0)[1:swapper/0]i2c-0: base(0xffffff8000db4000),dmabase(0xffffff8000db2180),irq(0x116)
[ 0.873314] .(0)[1:swapper/0] mt_i2c_probe ok------------------
[ 0.874133] .(0)[1:swapper/0] mt_i2c_probe+++++++++++++++++
[ 0.874890] .(0)[1:swapper/0]reg: 0xffffff8000db8000, irq: 0x117, id: 1
[ 0.875804] .(0)[1:swapper/0] id: 1, reg: 0xffffff8000db8000, dma_reg: 0xffffff8000db2200, irq: 117
[ 0.876982] .(0)[1:swapper/0]i2c-bus1 speed is 100Khz
[ 0.878558] .(4)[1:swapper/0]i2c-1: base(0xffffff8000db8000),dmabase(0xffffff8000db2200),irq(0x117)
[ 0.879481] .(4)[1:swapper/0] mt_i2c_probe ok------------------
[ 0.880305] .(4)[1:swapper/0] mt_i2c_probe+++++++++++++++++
[ 0.881068] .(4)[1:swapper/0]reg: 0xffffff8000dbc000, irq: 0x118, id: 2
[ 0.882026] .(4)[1:swapper/0] id: 2, reg: 0xffffff8000dbc000, dma_reg: 0xffffff8000db2280, irq: 118
[ 0.883204] .(4)[1:swapper/0]i2c-bus2 speed is 100Khz
[ 0.885677] .(4)[1:swapper/0]i2c-2: base(0xffffff8000dbc000),dmabase(0xffffff8000db2280),irq(0x118)
[ 0.886600] .(4)[1:swapper/0] mt_i2c_probe ok------------------
[ 0.887425] .(4)[1:swapper/0] mt_i2c_probe+++++++++++++++++
[ 0.888189] .(4)[1:swapper/0]reg: 0xffffff8000df0000, irq: 0x119, id: 3
[ 0.889098] .(4)[1:swapper/0] id: 3, reg: 0xffffff8000df0000, dma_reg: 0xffffff8000db2300, irq: 119
[ 0.890275] .(4)[1:swapper/0]i2c-bus3 speed is 100Khz
[ 0.890999] .(4)[1:swapper/0]i2c-3: base(0xffffff8000df0000),dmabase(0xffffff8000db2300),irq(0x119)
[ 0.891946] .(4)[1:swapper/0] mt_i2c_probe ok------------------
[ 0.892773] .(4)[1:swapper/0] mt_i2c_probe+++++++++++++++++
[ 0.893531] .(4)[1:swapper/0]reg: 0xffffff8000df4000, irq: 0x120, id: 4
[ 0.894438] .(4)[1:swapper/0] id: 4, reg: 0xffffff8000df4000, dma_reg: 0xffffff8000db2380, irq: 120
[ 0.895613] .(4)[1:swapper/0]i2c-bus4 speed is 100Khz
[ 0.896627] .(0)[1:swapper/0]i2c-4: base(0xffffff8000df4000),dmabase(0xffffff8000db2380),irq(0x120)
[ 0.897547] .(0)[1:swapper/0] mt_i2c_probe ok------------------
[ 0.898660] .(0)[1:swapper/0]BOOTPROF: 898.653693:initcall: mt_i2c_init 32.674308ms
[ 0.899751] .(0)[1:swapper/0]i2c_common device init
[ 0.900653] .(0)[1:swapper/0]i2c_common device probe
[ 0.903587] .(0)[1:swapper/0][Accdet]accdet_mod_init begin!
[ 0.905061] .(0)[1:swapper/0][Accdet]accdet_probe begin!
[ 0.905953] .(0)[1:swapper/0]input: ACCDET as /devices/virtual/input/input0
[ 0.906995] .(0)[1:swapper/0][Accdet]accdet_probe : ACCDET_INIT
[ 0.907991] .(0)[1:swapper/0][ACCDET]Start accdet_get_dts_data
[ 0.909823] .(0)[1:swapper/0][Accdet]mid-Key = 80, up_key = 220, down_key = 500
[ 0.910783] .(0)[1:swapper/0][Accdet]pwm_width = 500, pwm_thresh = 200\x0a deb0 = 800, deb1 = 800, mic_mode = 6
[ 0.913971] .(0)[1:swapper/0] efusevalue = 0xffffea00, accdet_auxadc_offset = -11
[ 0.914943] .(0)[1:swapper/0][Accdet]accdet_probe done!
[ 0.915817] .(0)[1:swapper/0][Accdet]platform_driver_register done!
[ 0.916628] .(0)[1:swapper/0][Accdet]accdet_mod_init done!
[ 0.918572] .(0)[1:swapper/0]mtk_rtc_common: rtc_init
[ 0.920163] .(0)[1:swapper/0]mtk_rtc_common: read al time = 1970/01/01 00:00:00 (0)
[ 0.922108] .(0)[1:swapper/0]mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0
[ 2.921387] .(0)[1:swapper/0]ERROR,507: id=4,addr: 6b, transfer timeout
[ 2.922242] .(0)[1:swapper/0]I2C(4) dump info++++++++++++++++++++++
[ 2.923063] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=4,Speed mode=2,St_rs=0,Dma_en=0,Op=3,Poll_en=0,Irq_stat=0\x0a[I2C]Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=ffff,speed=3400\x0a[I2C]Trans_stop=0,Trans_comp=0,Trans_error=0
[ 2.926315] .(0)[1:swapper/0]base address 0xffffff8000df4000
[ 2.927063] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=d6,INTR_MASK=ff,INTR_STAT=0,CONTROL=3a,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=2,DELAY_LEN=2,TIMING=1010,START=1,FIFO_STAT=110\x0a[I2C]IO_CONFIG=0,HS=203,DCM_EN=0,DEBUGSTAT=4c,EXT_CONF=1800,TRANSFER_LEN_AUX=1
[ 2.930559] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 2.933533] .(0)[1:swapper/0]DMA register(0xffffff8000db2380):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 2.936492] .(0)[1:swapper/0]I2C(4) dump info------------------------------
[ 4.931379] .(0)[1:swapper/0]ERROR,507: id=4,addr: 6b, transfer timeout
[ 4.932234] .(0)[1:swapper/0]I2C(4) dump info++++++++++++++++++++++
[ 4.933054] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=4,Speed mode=2,St_rs=0,Dma_en=0,Op=3,Poll_en=0,Irq_stat=0\x0a[I2C]Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=ffff,speed=3400\x0a[I2C]Trans_stop=0,Trans_comp=0,Trans_error=0
[ 4.936305] .(0)[1:swapper/0]base address 0xffffff8000df4000
[ 4.937053] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=d6,INTR_MASK=ff,INTR_STAT=0,CONTROL=3a,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=2,DELAY_LEN=2,TIMING=1010,START=1,FIFO_STAT=110\x0a[I2C]IO_CONFIG=0,HS=203,DCM_EN=0,DEBUGSTAT=4c,EXT_CONF=1800,TRANSFER_LEN_AUX=1
[ 4.940548] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 4.943521] .(0)[1:swapper/0]DMA register(0xffffff8000db2380):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 4.946480] .(0)[1:swapper/0]I2C(4) dump info------------------------------
[ 6.941378] .(0)[1:swapper/0]ERROR,507: id=4,addr: 6b, transfer timeout
[ 6.942232] .(0)[1:swapper/0]I2C(4) dump info++++++++++++++++++++++
[ 6.943052] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=4,Speed mode=2,St_rs=0,Dma_en=0,Op=3,Poll_en=0,Irq_stat=0\x0a[I2C]Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=ffff,speed=3400\x0a[I2C]Trans_stop=0,Trans_comp=0,Trans_error=0
[ 6.946303] .(0)[1:swapper/0]base address 0xffffff8000df4000
[ 6.947051] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=d6,INTR_MASK=ff,INTR_STAT=0,CONTROL=3a,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=2,DELAY_LEN=2,TIMING=1010,START=1,FIFO_STAT=110\x0a[I2C]IO_CONFIG=0,HS=203,DCM_EN=0,DEBUGSTAT=4c,EXT_CONF=1800,TRANSFER_LEN_AUX=1
[ 6.950546] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.953518] .(0)[1:swapper/0]DMA register(0xffffff8000db2380):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.956477] .(0)[1:swapper/0]I2C(4) dump info------------------------------
[ 8.951377] .(0)[1:swapper/0]ERROR,507: id=4,addr: 6b, transfer timeout
[ 8.952232] .(0)[1:swapper/0]I2C(4) dump info++++++++++++++++++++++
[ 8.953052] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=4,Speed mode=2,St_rs=0,Dma_en=0,Op=3,Poll_en=0,Irq_stat=0\x0a[I2C]Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=ffff,speed=3400\x0a[I2C]Trans_stop=0,Trans_comp=0,Trans_error=0
[ 8.956303] .(0)[1:swapper/0]base address 0xffffff8000df4000
[ 8.957051] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=d6,INTR_MASK=ff,INTR_STAT=0,CONTROL=3a,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=2,DELAY_LEN=2,TIMING=1010,START=1,FIFO_STAT=110\x0a[I2C]IO_CONFIG=0,HS=203,DCM_EN=0,DEBUGSTAT=4c,EXT_CONF=1800,TRANSFER_LEN_AUX=1
[ 8.960545] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 8.963518] .(0)[1:swapper/0]DMA register(0xffffff8000db2380):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 8.966476] .(0)[1:swapper/0]I2C(4) dump info------------------------------
[ 8.967393] .(0)[1:swapper/0]BOOTPROF: 8967.387097:probe: probe=i2c_device_probe drv=mt6311(ffffffc000fc1988) 8044.236712ms
[ 8.970062] .(0)[1:swapper/0][pmic_setting_for_co_tsx] devinfo=0x2a
[ 8.970876] -(0)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[12] = {16432, 1, 6}
[ 8.971880] .(0)[1:swapper/0]BOOTPROF: 8971.874328:initcall: mt6311_init 8048.786250ms
[ 8.972971] .(0)[1:swapper/0]musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.974197] .(0)[1:swapper/0]musb probe
[ 8.974705] .(0)[1:swapper/0][MUSB]musb_probe 2485: musb_removed to 0
[ 8.975539] .(0)[1:swapper/0][MUSB]musb_probe 2488: dts node from dts_np
[ 8.976450] .(0)[1:swapper/0]musb probe reg: 0xffffff8000e20000 ,0xffffff8000e40000 , irq: 0x104
[ 8.977817] .(4)[1:swapper/0][MUSB]mt_usb_init 1266: mt_usb_init
[ 8.978724] .(4)[1:swapper/0]usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 8.979952] .(4)[1:swapper/0][MUSB]mt_usb_init 1312: regulator set vol ok, <3300000,3300000>
[ 8.981044] .(4)[1:swapper/0][MUSB]mt_usb_init 1318: enable USB regulator
[ 8.982191] .(4)[1:swapper/0][MUSB]mt_usb_init 1330: musb platform init ff00
[ 8.984768] .(4)[1:swapper/0][MUSB]mt_usb_enable 345: begin <0,0>,<1,0,0,0>
[ 8.996626] .(4)[1:swapper/0][MUSB]HQA_special 35: HQA, 0x18, before:88
[ 8.997484] .(4)[1:swapper/0][MUSB]HQA_special 39: HQA, 0x18, after:86
[ 8.998341] .(4)[1:swapper/0][MUSB]hs_slew_rate_cal 319: [USBPHY]slew calibration:FM_OUT =328,x=4195,value=4
[ 8.999876] .(4)[1:swapper/0][MUSB]usb_phy_recover 667: usb recovery success
[ 9.000788] .(4)[1:swapper/0][MUSB]mt_usb_enable 369: end, <1,0,1,0>
[ 9.002072] .(4)[1:swapper/0][MUSB]mt_usb_disable 378: begin, <1,1>,<1,1,1,0>
[ 9.003819] .(4)[1:swapper/0][MUSB]usb_phy_savecurrent 572: usb save current success
[ 9.004816] .(4)[1:swapper/0][MUSB]mt_usb_disable 384: end, <1,1,1,1>
[ 9.005769] .(4)[1:swapper/0][MUSB]musb_core_init 1803: musb-hdrc: ConfigData=0x1f (UTMI-16, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 9.007380] .(4)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 1 fifo size is 512 fifo address is 8
[ 9.008485] .(4)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 1 fifo size is 512 fifo address is 48
[ 9.009602] .(4)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 2 fifo size is 512 fifo address is 88
[ 9.010719] .(4)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 2 fifo size is 512 fifo address is c8
[ 9.011866] .(4)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 3 fifo size is 512 fifo address is 108
[ 9.013029] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 3 fifo size is 512 fifo address is 148
[ 9.013037] .(4)[150:kworker/4:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:NO-CDEV
[ 9.015695] .(5)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 4 fifo size is 512 fifo address is 188
[ 9.016822] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 4 fifo size is 512 fifo address is 1c8
[ 9.017951] .(5)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 5 fifo size is 512 fifo address is 208
[ 9.019079] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 5 fifo size is 512 fifo address is 248
[ 9.020206] .(5)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 6 fifo size is 512 fifo address is 288
[ 9.021334] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 6 fifo size is 512 fifo address is 2c8
[ 9.022511] .(5)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 7 fifo size is 512 fifo address is 308
[ 9.023638] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 7 fifo size is 512 fifo address is 348
[ 9.024766] .(5)[1:swapper/0][MUSB]fifo_setup 1505: Tx ep 8 fifo size is 512 fifo address is 388
[ 9.025894] .(5)[1:swapper/0][MUSB]fifo_setup 1515: Rx ep 8 fifo size is 512 fifo address is 3c8
[ 9.027021] .(5)[1:swapper/0][MUSB]musb_core_init 1833: ep_config_from_table 0
[ 9.027957] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 0shared, max 64
[ 9.028997] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 1tx, max 512
[ 9.030006] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 1rx, max 512
[ 9.031014] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 2tx, max 512
[ 9.032038] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 2rx, max 512
[ 9.033046] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 3tx, max 512
[ 9.034055] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 3rx, max 512
[ 9.035064] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 4tx, max 512
[ 9.036072] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 4rx, max 512
[ 9.037081] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 5tx, max 512
[ 9.038089] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 5rx, max 512
[ 9.039098] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 6tx, max 512
[ 9.040107] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 6rx, max 512
[ 9.041116] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 7tx, max 512
[ 9.042138] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 7rx, max 512
[ 9.043146] .(5)[1:swapper/0][MUSB]musb_core_init 1859: musb-hdrc: hw_ep 8tx, max 512
[ 9.044154] .(5)[1:swapper/0][MUSB]musb_core_init 1867: musb-hdrc: hw_ep 8rx, max 512
[ 9.045162] .(5)[1:swapper/0][MUSB]musb_core_init 1872: musb_core_init end
[ 9.046081] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 0 name is ep0
[ 9.046992] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 1 name is ep1in
[ 9.047924] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 1 name is ep1out
[ 9.048867] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 2 name is ep2in
[ 9.049800] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 2 name is ep2out
[ 9.050744] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 3 name is ep3in
[ 9.051691] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 3 name is ep3out
[ 9.052633] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 4 name is ep4in
[ 9.053566] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 4 name is ep4out
[ 9.054509] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 5 name is ep5in
[ 9.055442] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 5 name is ep5out
[ 9.056386] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 6 name is ep6in
[ 9.057319] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 6 name is ep6out
[ 9.058262] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 7 name is ep7in
[ 9.059195] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 7 name is ep7out
[ 9.060138] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 8 name is ep8in
[ 9.061071] .(5)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 8 name is ep8out
[ 9.062338] .(5)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: prop=1, power=0, is_host=0
[ 9.063334] .(5)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: prop=2, power=0, is_host=0
[ 9.064324] .(5)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: prop=3, power=0, is_host=0
[ 9.065350] .(5)[29:kworker/5:0]musb-hdrc musb-hdrc.0.auto: prop=1, power=0, is_host=0
[ 9.066373] .(5)[29:kworker/5:0]musb-hdrc musb-hdrc.0.auto: prop=2, power=0, is_host=0
[ 9.067396] .(5)[29:kworker/5:0]musb-hdrc musb-hdrc.0.auto: prop=3, power=0, is_host=0
[ 9.068438] .(5)[1:swapper/0][MUSB]mt_usb_disable 378: begin, <0,0>,<1,2,1,1>
[ 9.069358] .(5)[1:swapper/0]musb core probe done base 0xffffff8000e40000
[ 9.070249] .(5)[1:swapper/0]BOOTPROF: 9070.243482:probe: probe=platform_drv_probe drv=musb-hdrc(ffffffc000fc23b8) 96.039924ms
[ 9.071813] .(5)[1:swapper/0][MUSB]musb_do_idle 301: otg_state b_idle
[ 9.072694] .(5)[1:swapper/0]BOOTPROF: 9072.688559:initcall: musb_init 99.714769ms
[ 9.074064] .(5)[1:swapper/0]can't find compatible node
[ 9.074810] .(5)[1:swapper/0][BOOT_COMMON] [create_sysfs] No atag,meta found !
[ 9.076053] .(5)[1:swapper/0][HX8394F] tps65132_iic_init2
[ 9.076808] .(5)[1:swapper/0][HX8394F] tps65132_iic_init success
[ 9.077595] .(5)[1:swapper/0]*********hx8394d tps65132_iic_init2
[ 9.078373] .(5)[1:swapper/0]Error: Driver 'tps65132' is already registered, aborting...
[ 9.079413] .(5)[1:swapper/0]*********hx8394d tps65132_iic_init success
[ 9.082321] .(5)[1:swapper/0][DISP]primary_display_init begin
[ 9.083176] .(5)[1:swapper/0]ddp_mmp_init
[ 9.083715] .(5)[1:swapper/0]ddp manager init
[ 9.084286] .(5)[1:swapper/0]disp_init_irq
[ 9.085436] .(0)[1:swapper/0][HX8394F] lcm_get_params 830
[ 9.086346] .(0)[1:swapper/0][DISP]__build_path_direct_link
[ 9.087076] .(0)[1:swapper/0][DISP]dpmgr create path SUCCESS(0xffffffc0b6fdc000)
[ 9.088047] .(0)[1:swapper/0]M4Uconfig_port:DISP_OVL0,v1,s0
[ 9.088784] .(0)[1:swapper/0]M4Uconfig_port:DISP_RDMA0,v1,s0
[ 9.089525] .(0)[1:swapper/0]M4Uconfig_port:DISP_WDMA0,v1,s0
[ 9.094235] .(0)[1:swapper/0][HX8394F] lcm_set_util_funcs 824
[ 9.095584] .(0)[1:swapper/0][DISP]primary display BUILD cmdq trigger loop finished
[ 9.096667] .(0)[1:swapper/0][DISP]primary display START cmdq trigger loop finished
[ 9.098215] .(0)[1:swapper/0][DISP][ESD]esd check thread wakeup
[ 9.099403] .(0)[1:swapper/0]M4Uconfig_port:DISP_WDMA0,v1,s0
[ 9.106459] .(0)[1:swapper/0][ION]ion_drv_create_heap: create heap: ion_fb_heap
[ 9.107419] .(0)[1:swapper/0]BOOTPROF: 9107.413559:probe: probe=mtkfb_probe drv=mtkfb(ffffffc000fcaed0) 25.351000ms
[ 9.109011] .(0)[1:swapper/0]BOOTPROF: 9109.005944:initcall: mtkfb_init 27.249231ms
[ 9.111307] .(0)[1:swapper/0][MALI] Midgard r26p0-01rel0 DDK kernel device driver. GPU probe() begin.
[ 9.112588] .(0)[1:swapper/0]mali 13040000.MALI: Continuing without Mali regulator control
[ 9.113650] .(0)[1:swapper/0]of_clk_get debug 1
[ 9.114246] .(0)[1:swapper/0]of_clk_get debug 2
[ 9.114863] .(0)[1:swapper/0]of_clk_get debug 3 rc 0
[ 9.115509] .(0)[1:swapper/0]of_clk_get debug 4
[ 9.116106] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 1
[ 9.116822] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 2
[ 9.117538] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 3
[ 9.118254] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 4
[ 9.118969] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 5
[ 9.119685] .(0)[1:swapper/0]of_clk_get_by_clkspec debug 6
[ 9.120401] .(0)[1:swapper/0]of_clk_get debug 5
[ 9.120997] .(0)[1:swapper/0]of_clk_get debug 6
[ 9.121611] .(0)[1:swapper/0]mali 13040000.MALI: Failed to get clock
[ 9.122435] .(0)[1:swapper/0]mali 13040000.MALI: Continuing without Mali clock control
[ 9.124898] .(0)[1:swapper/0]mali 13040000.MALI: GPU identified as 0x0720 r1p0 status 0
[ 9.126213] .(0)[1:swapper/0]mali 13040000.MALI: Protected mode not available
[ 9.127761] .(0)[1:swapper/0]mali 13040000.MALI: Probed as mali0
[ 9.128555] .(0)[1:swapper/0][MALI] Midgard r26p0-01rel0 DDK kernel device driver. GPU probe() end.
[ 9.129731] .(0)[1:swapper/0]BOOTPROF: 9129.725405:probe: probe=platform_drv_probe drv=mali(ffffffc000fce4e0) 18.416154ms
[ 9.131333] .(0)[1:swapper/0]BOOTPROF: 9131.327713:initcall: kbase_platform_driver_init 20.440230ms
[ 9.135339] .(0)[1:swapper/0]kd_camera_hw supply vcama_sub not found, using dummy regulator
[ 9.136723] .(0)[1:swapper/0]kd_camera_hw supply vcama_pm not found, using dummy regulator
[ 9.137821] .(0)[1:swapper/0]kd_camera_hw supply vcamd_pm not found, using dummy regulator
[ 9.138918] .(0)[1:swapper/0]kd_camera_hw supply vcamio_pm not found, using dummy regulator
[ 9.140994] .(0)[1:swapper/0]MAINAF [AF_i2c_probe] Start
[ 9.141723] .(0)[1:swapper/0]MAINAF [Register_AF_CharDrv] Start
[ 9.142553] .(0)[1:swapper/0]MAINAF [Register_AF_CharDrv] End
[ 9.143300] .(0)[1:swapper/0]MAINAF [AF_i2c_probe] Attached!!
[ 9.144850] .(0)[1:swapper/0][register_low_battery_notify] prio_val=5
[ 9.145685] .(0)[1:swapper/0][register_battery_percent_notify] prio_val=5
[ 9.147037] .(4)[1:swapper/0]C2K_USB_NOTE,<init 706>, rawbulk functions init.
[ 9.147983] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_alloc_function 595>, rawbulk_alloc_function
[ 9.149162] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_alloc_function 595>, rawbulk_alloc_function
[ 9.150321] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_alloc_function 595>, rawbulk_alloc_function
[ 9.151523] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_alloc_function 595>, rawbulk_alloc_function
[ 9.152686] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_alloc_function 595>, rawbulk_alloc_function
[ 9.153853] .(4)[1:swapper/0]C2K_USB_NOTE,<rawbulk_init 1243>, rawbulk_init
[ 9.157107] .(0)[1:swapper/0][ccci1/plat]MD ROM mem remap:[ba000000]->[0](c1bfbdbb:c9c7c5c3)
[ 9.165865] .(0)[1:swapper/0][CONN-MD-DFT][W]conn_md_add_user:uid (0x00000005) is added to user list successfully
[ 9.170168] .(4)[1:swapper/0]MTK-BTIF[I]mtk_btif_probe:DO BTIF PROBE
[ 9.171325] .(4)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_btif_buffer get memory 0xffffffc0b5d40000
[ 9.172458] .(4)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_tx_queue get memory 0xffffffc0b68a7800
[ 9.173530] .(4)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_rx_queue get memory 0xffffffc0b5d1a000
[ 9.174593] .(4)[1:swapper/0]MTK-BTIF[I]hal_btif_info_get:_btif_tx_fifo_init succeed
[ 9.175817] .(4)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get btif irq(122),register base(0xffffff800249e000)
[ 9.177174] .(4)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get interrupt flag(0x8)
[ 9.178225] .(4)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get register phy base(0x1100c000)
[ 9.179487] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get tx_dma irq(145),register base(0xffffff80024aa900)
[ 9.180930] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
[ 9.182081] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(1)(0x11000900)
[ 9.183433] .(4)[1:swapper/0]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000da72f0,
[ 9.184714] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get rx_dma irq(146),register base(0xffffff80024ac980)
[ 9.186173] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
[ 9.187290] .(4)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(0)(0x11000980)
[ 9.188637] .(0)[1:swapper/0]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000da72f0,
[ 9.189939] .(0)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:btif_rxd start to work!
[ 9.190921] .(0)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:rx_spin_lock init succeed
[ 9.191932] .(0)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:nothing is done when btif tx in user's thread
[ 9.193134] .(0)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:succeed
[ 9.193931] .(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:devuce number allocation succeed
[ 9.194982] .(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:add btif dev to kernel succeed
[ 9.196031] .(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create class for btif succeed
[ 9.197093] .(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create device for btif succeed
[ 9.198135] .(0)[1:swapper/0]BOOTPROF: 9198.129636:initcall: BTIF_init 28.139077ms
[ 9.200099] .(0)[1:swapper/0][LAST PC] CORE_0 PC = 0xffffffc0006a8f14(aee_wdt_atf_info), FP = 0xffffffc0b6e1f9a0, SP = 0xffffffc0b6e1f9a0
[ 9.201712] .(0)[1:swapper/0][LAST PC] CORE_1 PC = 0xffffffc000357938(vsnprintf), FP = 0xffffffc08c826e60, SP = 0xffffffc08c826e60
[ 9.203221] .(0)[1:swapper/0][LAST PC] CORE_2 PC = 0xffffffc0006a8f14(aee_wdt_atf_info), FP = 0xffffffc0ae9fbaa0, SP = 0xffffffc0ae9fbaa0
[ 9.204803] .(0)[1:swapper/0][LAST PC] CORE_3 PC = 0xffffffc0006a8f14(aee_wdt_atf_info), FP = 0xffffffc0a98478b0, SP = 0xffffffc0a98478b0
[ 9.206381] .(0)[1:swapper/0][LAST PC] CORE_4 PC = 0x0(), FP = 0x0, SP = 0x0
[ 9.207296] .(0)[1:swapper/0][LAST PC] CORE_5 PC = 0x0(), FP = 0x0, SP = 0x0
[ 9.208212] .(0)[1:swapper/0][LAST PC] CORE_6 PC = 0x0(), FP = 0x0, SP = 0x0
[ 9.209127] .(0)[1:swapper/0][LAST PC] CORE_7 PC = 0x0(), FP = 0x0, SP = 0x0
[ 9.210248] .(0)[1:swapper/0]systracker probe
[ 9.210832] .(0)[1:swapper/0]of_iomap for systracker @ 0xffffff80024b0000
[ 9.211739] .(0)[1:swapper/0]systracker_platform_probe_default:93: irq # 169
[ 9.212828] .(0)[1:swapper/0]systracker init done
[ 9.216557] .(0)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_init
[ 9.216686] .(0)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]thermal_prob
[ 9.225016] .(0)[1:swapper/0][W]mtk_wcn_cmb_stub_query_ctrl:Thermal query not registered
[ 9.227343] .(4)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_bind binding OK, 1
[ 9.228043] .(4)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_bind binding OK, 2
[ 9.228449] .(4)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_bind binding OK, 3
[ 9.228802] .(4)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_bind binding OK, 4
[ 9.229202] .(4)[1:swapper/0][name:mtk_ts_cpu&][CPU_Thermal]tscpu_bind binding OK, 0
[ 9.230023] .(1)[1:swapper/0]atf_log: inited
[ 9.230559] .(1)[1:swapper/0]No atf_log_buffer!
[ 9.231410] .(1)[1:swapper/0]get EMI_BASE_ADDR @ ffffff80024ba000
[ 9.234184] .(1)[1:swapper/0]mt-spi 1100a000.spi: spi.c: 1411: <mt_spi_probe>Controller at 0xffffff80024be000 (irq 150)
[ 9.235638] .(1)[1:swapper/0]mt-spi 1100a000.spi: master is unqueued, this is deprecated
[ 9.237113] .(1)[1:swapper/0]spi spi0.1: spi.c: 1244: <mt_spi_setup>set up chip config,mode:1
[ 9.239024] .(1)[1:swapper/0]tun: Universal TUN/TAP device driver, 1.6
[ 9.239869] .(1)[1:swapper/0]tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 9.240910] .(1)[1:swapper/0]PPP generic driver version 2.4.2
[ 9.241774] .(1)[1:swapper/0]PPP BSD Compression module registered
[ 9.242580] .(1)[1:swapper/0]PPP Deflate Compression module registered
[ 9.243445] .(1)[1:swapper/0]PPP MPPE Compression module registered
[ 9.244370] .(1)[1:swapper/0]usbcore: registered new interface driver usb-storage
[ 9.245374] .(1)[1:swapper/0]usbcore: registered new interface driver ums-alauda
[ 9.246359] .(1)[1:swapper/0]usbcore: registered new interface driver ums-cypress
[ 9.247354] .(1)[1:swapper/0]usbcore: registered new interface driver ums-datafab
[ 9.248352] .(1)[1:swapper/0]usbcore: registered new interface driver ums-freecom
[ 9.249348] .(1)[1:swapper/0]usbcore: registered new interface driver ums-isd200
[ 9.250332] .(1)[1:swapper/0]usbcore: registered new interface driver ums-jumpshot
[ 9.251356] .(1)[1:swapper/0]usbcore: registered new interface driver ums-karma
[ 9.252332] .(1)[1:swapper/0]usbcore: registered new interface driver ums-onetouch
[ 9.253344] .(1)[1:swapper/0]usbcore: registered new interface driver ums-sddr09
[ 9.254329] .(1)[1:swapper/0]usbcore: registered new interface driver ums-sddr55
[ 9.255313] .(1)[1:swapper/0]usbcore: registered new interface driver ums-usbat
[ 9.256294] .(1)[1:swapper/0]usbcore: registered new interface driver trancevibrator
[ 9.258105] .(0)[1:swapper/0]kpd: Keypad probe start!!!
[ 9.258790] .(0)[1:swapper/0]of_clk_get debug 1
[ 9.259382] .(0)[1:swapper/0]of_clk_get debug return ERR_PTR(-EINVAL)
[ 9.260221] .(0)[1:swapper/0]kpd: get kpd-clk fail, but not return, maybe kpd-clk is set by ccf.
[ 9.261413] .(0)[1:swapper/0]kpd: kp base: 0xffffff80024d2000, addr:0xffffffc001535308, kp irq: 196
[ 9.262613] .(0)[1:swapper/0]kpd: key-debounce = 1024, sw-pwrkey = 116, hw-pwrkey = 8, hw-rstkey = 17, sw-rstkey = 115
[ 9.263980] .(0)[1:swapper/0]kpd: init_keymap_state done: ffff ffff ffff ffff ff!
[ 9.265073] .(0)[1:swapper/0]input: mtk-kpd as /devices/soc/10003000.keypad/input/input1
[ 9.266241] .(0)[1:swapper/0]kpd: Normal Boot long press reboot selection
[ 9.267116] .(0)[1:swapper/0]kpd: Enable normal mode LPRST
[ 9.267860] .(0)[1:swapper/0]kpd: kpd_pdrv_probe Done
[ 9.269515] .(0)[1:swapper/0][tpd_em_log] :register device successfully
[ 9.270377] .(0)[1:swapper/0][HXTP] Himax 852xES touch panel driver init
[ 9.271273] .(5)[162:kworker/u16:2][HXTP] himax852xes_init_async:Enter
[ 9.271633] .(0)[1:swapper/0]******** battery_meter_dts_probe!! ********
[ 9.271836] .(0)[1:swapper/0]__batt_meter_init_cust_data_from_cust_header
[ 9.271983] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find battery_profile_t0 in dts
[ 9.271989] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find battery_profile_t1 in dts
[ 9.271994] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find battery_profile_t2 in dts
[ 9.272000] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find battery_profile_t3 in dts
[ 9.272005] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find r_profile_t0 in dts
[ 9.272010] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find r_profile_t1 in dts
[ 9.272016] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find r_profile_t2 in dts
[ 9.272021] .(0)[1:swapper/0][__batt_meter_parse_table] cannot find r_profile_t3 in dts
[ 9.272287] .(0)[1:swapper/0]md: linear personality registered for level -1
[ 9.272501] .(0)[1:swapper/0]device-mapper: uevent: version 1.0.3
[ 9.272668] .(0)[1:swapper/0]device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[ 9.275781] .(0)[1:swapper/0][sd]of msdc DT probe msdc0!
[ 9.275805] .(0)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8002840000
[ 9.275829] .(0)[1:swapper/0][sd]msdc get irq # 111
[ 9.275900] .(0)[1:swapper/0][sd][MSDC0] hs200 ett setting for default is found in DT.
[ 9.275909] .(0)[1:swapper/0][sd][MSDC0] hs400 ett setting for default is found in DT.
[ 9.276027] .(0)[1:swapper/0][sd]of_iomap for gpio base @ 0xffffff80024d8000
[ 9.276825] .(0)[1:swapper/0][sd]of_iomap for APMIXED base @ 0xffffff80024f2000
[ 9.276916] .(0)[1:swapper/0][sd]of_iomap for TOPCKGEN base @ 0xffffff80024f4000
[ 9.301545] .(0)[1:swapper/0][sd]msdc0 Set<400K> src:<400000K> sclk:<400K> timing<0> mode:0 div:250
[ 9.321387] .(0)[1:swapper/0][sd]MSDCPLL_PWR_CON0[0xffffff80024f224c][bit0~1 should be 2b'01]=0x80000001
[ 9.322387] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00>
[ 9.323958] .(0)[1:swapper/0][sd][msdc_command_resp_polling]: msdc0 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08>
[ 9.323961] .(0)[1:swapper/0][sd]MSDCPLL_CON0 [0xffffff80024f2240][bit0 should be 1b'1]=0x101
[ 9.326378] .(0)[1:swapper/0][sd]CLK_CFG_2 [0xffffff80024f4060][bit[31:24]should be 0x01]=0x1818100
[ 9.326903] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa>
[ 9.327411] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.327927] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.328442] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.328961] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.329473] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.329989] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.330505] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.338404] .(0)[1:swapper/0][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.338406] .(0)[1:swapper/0][sd]CLK_CFG_3 [0xffffff80024f4070][bit[15:0]should be 0x0202]=0x7020202
[ 9.340932] .(0)[1:swapper/0][sd]PERI_PDN_STA0 [0xffffff80024dc018][bit13=msdc0, bit14=msdc1,0:on,1:off]=0x77fddffc
[ 9.342306] .(0)[1:swapper/0]BOOTPROF: 9342.300252:probe: probe=platform_drv_probe drv=mtk-msdc(ffffffc000ffb298) 66.556230ms
[ 9.343959] .(0)[1:swapper/0]mtk-msdc 11240000.msdc1: Got CD GPIO
[ 9.344778] .(0)[1:swapper/0][sd]of msdc DT probe msdc1!
[ 9.345486] .(0)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8002860000
[ 9.346363] .(0)[1:swapper/0][sd]msdc get irq # 112
[ 9.364581] .(5)[162:kworker/u16:2]mmc0: BKOPS_EN bit is not set
[ 9.369100] .(5)[162:kworker/u16:2][sd]--- apply default emmc ett settings
[ 9.369989] .(5)[162:kworker/u16:2][sd][MSDC, msdc_apply_ett_settings] hs200 ett, ett_count=12
[ 9.371098] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x380],val[0x0],readback[0x403c000f]
[ 9.371538] .(0)[1:swapper/0][sd]msdc1 Set<400K> src:<200000K> sclk:<400K> timing<0> mode:0 div:125
[ 9.373682] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x7c00],val[0x0],readback[0x403c000f]
[ 9.375103] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb4],offset[0x38],val[0x1],readback[0xfffe00c9]
[ 9.376502] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x2],val[0x1],readback[0xa]
[ 9.377804] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f0000],val[0xf],readback[0xf0000]
[ 9.379214] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x7c00000],val[0x0],readback[0xf0000]
[ 9.380635] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb4],offset[0x7],val[0x1],readback[0xfffe00c9]
[ 9.382035] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f],val[0xf],readback[0xf000f]
[ 9.383402] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x400],val[0x1],readback[0x40a]
[ 9.384747] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf8],offset[0x1f000000],val[0xf],readback[0xf000000]
[ 9.386201] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f00],val[0x16],readback[0xf160f]
[ 9.387599] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x4],val[0x0],readback[0x40a]
[ 9.390270] .(5)[162:kworker/u16:2][sd]msdc0 Set<200000K> src:<400000K> sclk:<200000K> timing<9> mode:0 div:0
[ 9.391569] .(5)[162:kworker/u16:2][sd]msdc0 Set<52000K> src:<400000K> sclk:<50000K> timing<1> mode:0 div:2
[ 9.391587] .(1)[1:swapper/0][sd]MSDCPLL_PWR_CON0[0xffffff80024f224c][bit0~1 should be 2b'01]=0x80000001
[ 9.391593] .(1)[1:swapper/0][sd]MSDCPLL_CON0 [0xffffff80024f2240][bit0 should be 1b'1]=0x101
[ 9.391599] .(1)[1:swapper/0][sd]CLK_CFG_2 [0xffffff80024f4060][bit[31:24]should be 0x01]=0x1818100
[ 9.391604] .(1)[1:swapper/0][sd]CLK_CFG_3 [0xffffff80024f4070][bit[15:0]should be 0x0202]=0x7020202
[ 9.391610] .(1)[1:swapper/0][sd]PERI_PDN_STA0 [0xffffff80024dc018][bit13=msdc0, bit14=msdc1,0:on,1:off]=0x77fd9ffc
[ 9.391631] .(1)[1:swapper/0]BOOTPROF: 9391.625098:probe: probe=platform_drv_probe drv=mtk-msdc(ffffffc000ffb298) 47.725923ms
[ 9.391753] .(1)[1:swapper/0][sd]of msdc DT probe msdc3!
[ 9.391778] .(1)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8002880000
[ 9.391798] .(1)[1:swapper/0][sd]msdc get irq # 114
[ 9.391810] .(1)[1:swapper/0][sd][MSDC3] register_setting is not found in DT.
[ 9.392421] .(1)[1:swapper/0][C2K] request interrupt 262 from msdc_drv_probe
[ 9.392427] .(1)[1:swapper/0]c2k_sdio_register_pm (0xffffffc0007db604, 0xffffffc0032b5600)
[ 9.392567] .(1)[1:swapper/0][sd]error...[msdc_set_smt] host->id out of range!!!
[ 9.392572] .(1)[1:swapper/0][sd]error...[msdc_set_driving] host->id out of range!!!
[ 9.392578] .(1)[1:swapper/0][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 9.392586] .(1)[1:swapper/0][sd]msdc3 -> No power control, host_function<2> & Power_domain<0> <- msdc_set_power_mode() : L<2976> PID<swapper/0><0x1>
[ 9.410303] .(5)[162:kworker/u16:2][sd]--- apply default emmc ett settings
[ 9.411198] .(5)[162:kworker/u16:2][sd][MSDC, msdc_apply_ett_settings] hs400 ett, ett_count=8
[ 9.412311] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x380],val[0x0],readback[0x403c000f]
[ 9.413722] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x7c00],val[0x0],readback[0x403c000f]
[ 9.415143] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x188],offset[0x7c],val[0x2],readback[0x14009]
[ 9.416520] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x188],offset[0x1f000],val[0xe],readback[0xe009]
[ 9.417920] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb4],offset[0x38],val[0x1],readback[0xfffe00c8]
[ 9.419318] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x2],val[0x0],readback[0x8]
[ 9.420620] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f0000],val[0xf],readback[0xf0000]
[ 9.421388] .(1)[1:swapper/0][sd]msdc3 Set<400K> src:<200000K> sclk:<400K> timing<0> mode:0 div:125
[ 9.423193] .(5)[162:kworker/u16:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x7c00000],val[0xd],readback[0x34f0000]
[ 9.424653] .(5)[162:kworker/u16:2][sd]msdc0 Set<200000K> src:<400000K> sclk:<200000K> timing<10> mode:3 div:0
[ 9.426016] .(5)[162:kworker/u16:2]mmc0: new HS400 MMC card at address 0001
[ 9.427344] .(0)[162:kworker/u16:2]mmcblk0: mmc0:0001 R21BMB 29.1 GiB
[ 9.428388] .(4)[162:kworker/u16:2]mmcblk0boot0: mmc0:0001 R21BMB partition 1 4.00 MiB
[ 9.429598] .(0)[162:kworker/u16:2]mmcblk0boot1: mmc0:0001 R21BMB partition 2 4.00 MiB
[ 9.430789] .(4)[162:kworker/u16:2]mmcblk0rpmb: mmc0:0001 R21BMB partition 3 4.00 MiB
[ 9.433246] .(4)[162:kworker/u16:2] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26
[ 9.441391] .(1)[1:swapper/0][sd]MSDCPLL_PWR_CON0[0xffffff80024f224c][bit0~1 should be 2b'01]=0x80000001
[ 9.442607] .(1)[1:swapper/0][sd]MSDCPLL_CON0 [0xffffff80024f2240][bit0 should be 1b'1]=0x101
[ 9.443734] .(1)[1:swapper/0][sd]CLK_CFG_2 [0xffffff80024f4060][bit[31:24]should be 0x01]=0x1818100
[ 9.444959] .(1)[1:swapper/0][sd]CLK_CFG_3 [0xffffff80024f4070][bit[15:0]should be 0x0202]=0x7020202
[ 9.446196] .(1)[1:swapper/0][sd]PERI_PDN_STA0 [0xffffff80024dc018][bit13=msdc0, bit14=msdc1,0:on,1:off]=0x77fc9ffc
[ 9.447555] .(1)[1:swapper/0]BOOTPROF: 9447.548944:probe: probe=platform_drv_probe drv=mtk-msdc(ffffffc000ffb298) 55.848846ms
[ 9.449777] .(1)[1:swapper/0]BOOTPROF: 9449.771483:initcall: mt_msdc_init 174.295539ms
[ 9.450998] .(1)[1:swapper/0]msdc @ 0xffffff8002840000, id:0
[ 9.451754] .(1)[1:swapper/0]msdc @ 0xffffff8002860000, id:1
[ 9.452575] .(1)[1:swapper/0]hidraw: raw HID events driver (C) Jiri Kosina
[ 9.454604] .(1)[1:swapper/0]usbcore: registered new interface driver usbhid
[ 9.455512] .(1)[1:swapper/0]usbhid: USB HID core driver
[ 9.456724] .(1)[1:swapper/0]ashmem: initialized
[ 9.457893] .(1)[1:swapper/0]usbcore: registered new interface driver snd-usb-audio
[ 9.460405] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state default fail -19
[ 9.461428] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audpmicclk-mode0 fail -19
[ 9.462522] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audpmicclk-mode1 fail -19
[ 9.463617] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audi2s1-mode0 fail -19
[ 9.464679] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audi2s1-mode1 fail -19
[ 9.465742] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp-pullhigh fail -19
[ 9.466827] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp-pulllow fail -19
[ 9.467901] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp2-pullhigh fail -19
[ 9.468996] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp2-pulllow fail -19
[ 9.470080] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state rcvspk-pullhigh fail -19
[ 9.471165] .(1)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state rcvspk-pulllow fail -19
[ 9.475509] .(1)[1:swapper/0]BOOTPROF: 9475.503098:probe: probe=platform_drv_probe drv=mt-soc-dl1-pcm(ffffffc001009b30) 15.256231ms
[ 9.477220] .(1)[1:swapper/0]BOOTPROF: 9477.215021:initcall: mtk_soc_platform_init 17.127308ms
[ 9.482096] .(1)[1:swapper/0]mtk_deep_buffer_dl_probe
[ 9.486487] .(1)[1:swapper/0]soc-audio soc-audio: ASoC: machine mt-snd-card should use snd_soc_register_card()
[ 9.488248] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
[ 9.489422] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
[ 9.491095] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
[ 9.492321] .(2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
[ 9.495369] .(2)[1:swapper/0]soc-audio soc-audio: control 2:0:0:cmb stub Audio Control:0 is already present
[ 9.496621] .(2)[1:swapper/0]mt-soc-fm-i2s-pcm mt-soc-fm-i2s-pcm: ASoC: Failed to add cmb stub Audio Control: -16
[ 9.498115] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-tx-dai <-> mt-soc-dl1dai-driver mapping ok
[ 9.499405] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-rx-dai <-> mt-soc-ul1dai-driver mapping ok
[ 9.500714] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd1-dai <-> mt-soc-voicemd1dai-driver mapping ok
[ 9.502163] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-hdmi-dummy-dai-codec <-> mt-soc-hdmidai-driver mapping ok
[ 9.503574] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-uldlloopback-dai <-> mt-soc-uldlloopbackdai-driver mapping ok
[ 9.505086] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-i2s0-dummy-dai-codec <-> mt-soc-i2s0dai-driver mapping ok
[ 9.506493] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
[ 9.507870] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dummy-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
[ 9.509275] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-I2s0tx-dai <-> mt-soc-i2s0dl1dai-driver mapping ok
[ 9.510642] .(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-deepbuffer-tx-dai <-> snd-soc-dummy-dai mapping ok
[ 9.512062] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-dl1awb-dai <-> mt-soc-dl1awbdai-driver mapping ok
[ 9.513431] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd1-bt-dai <-> mt-soc-voicemd1-btdai-driver mapping ok
[ 9.514900] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btout-dai <-> mt-soc-voipcall-btdai-out-driver mapping ok
[ 9.516448] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btin-dai <-> mt-soc-voipcall-btdai-in-driver mapping ok
[ 9.517968] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-tdmrx-dai-codec <-> mt-soc-tdmrxdai-driver mapping ok
[ 9.519314] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-fmmrg2tx-dummy-dai-codec <-> mt-soc-fmmrgtxdai-driver mapping ok
[ 9.520771] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-rx-dai2 <-> mt-soc-ul2dai-driver mapping ok
[ 9.522087] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-i2s0awb-dai <-> mt-soc-i2s0awbdai-driver mapping ok
[ 9.523501] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-dai <-> mt-soc-voicemd2dai-driver mapping ok
[ 9.524903] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-dummy-dai-codec <-> Routing-Control mapping ok
[ 9.526167] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-bt-dai <-> mt-soc-voicemd2-btdai-driver mapping ok
[ 9.527633] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dai-codec <-> mt-soc-fmi2S-driver mapping ok
[ 9.528951] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dummy-dai-codec <-> mt-soc-fmi2S-driver mapping ok
[ 9.530335] .(1)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-tx-dai2 <-> mt-soc-dl2dai-driver mapping ok
[ 9.531822] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD1_PLayback debugfs file
[ 9.533243] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD2_PLayback debugfs file
[ 9.533627] .(4)[162:kworker/u16:2][sd]msdc1 Set<50000K> src:<200000K> sclk:<50000K> timing<2> mode:0 div:1
[ 9.533662] .(4)[162:kworker/u16:2]mmc1: new high speed SDHC card at address 0001
[ 9.534041] .(5)[162:kworker/u16:2]mmcblk1: mmc1:0001 SD8GB 7.28 GiB
[ 9.536784] .(5)[162:kworker/u16:2] mmcblk1: p1
[ 9.537185] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00>
[ 9.539711] .(1)[1:swapper/0][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08>
[ 9.539714] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
[ 9.540244] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa>
[ 9.540266] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540286] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540307] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540330] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540352] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540373] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540395] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540418] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540451] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<1> MSDC_INT_CMDTMO Arg<0x00000000>
[ 9.540454] .(5)[162:kworker/u16:2][sd]error...[msdc_set_smt] host->id out of range!!!
[ 9.540458] .(5)[162:kworker/u16:2][sd]error...[msdc_set_driving] host->id out of range!!!
[ 9.540465] .(5)[162:kworker/u16:2][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 9.551505] .(5)[162:kworker/u16:2][sd]msdc3 -> !!! Set<0 Hz>
[ 9.551508] .(5)[162:kworker/u16:2][sd]error...[msdc_set_smt] host->id out of range!!!
[ 9.551513] .(5)[162:kworker/u16:2][sd]error...[msdc_set_driving] host->id out of range!!!
[ 9.551519] .(5)[162:kworker/u16:2][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 9.551527] .(5)[162:kworker/u16:2][sd]msdc3 -> No power control, host_function<2> & Power_domain<0> <- msdc_set_power_mode() : L<2976> PID<kworker/u16:2><0xa2>
[ 9.564697] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
[ 9.566116] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create HMDI_PLayback debugfs file
[ 9.567479] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create I2S0_PLayback debugfs file
[ 9.568851] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MRGRX_PLayback debugfs file
[ 9.570237] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_MOD debugfs file
[ 9.571693] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_ADC2 debugfs file
[ 9.573145] .(1)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_IO2 debugfs file
[ 9.574645] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create Voice_MD1_PLayback debugfs file
[ 9.575932] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create Voice_MD2_PLayback debugfs file
[ 9.577235] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create ULDL_Loopback debugfs file
[ 9.578486] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create MRGRX_PLayback debugfs file
[ 9.579736] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create SPEAKER debugfs file
[ 9.580898] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create HEADSET debugfs file
[ 9.581385] .(5)[162:kworker/u16:2][sd]msdc3 Set<300K> src:<200000K> sclk:<299K> timing<0> mode:0 div:167
[ 9.583292] .(1)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create EARPIECE debugfs file
[ 9.584495] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create HMDI_PLayback debugfs file
[ 9.585875] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create Voice_MD1_PLayback debugfs file
[ 9.587272] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create Voice_MD2_PLayback debugfs file
[ 9.588671] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create ULDL_Loopback debugfs file
[ 9.590013] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create I2S0_PLayback debugfs file
[ 9.591389] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_PLayback debugfs file
[ 9.592742] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_CAPTURE debugfs file
[ 9.594121] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Playback debugfs file
[ 9.595485] .(1)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Capture debugfs file
[ 9.601393] .(1)[1:swapper/0][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00>
[ 9.602432] .(1)[1:swapper/0]BOOTPROF: 9602.421714:probe: probe=platform_drv_probe drv=soc-audio(ffffffc0010086a0) 115.930385ms
[ 9.602476] .(1)[1:swapper/0]BOOTPROF: 9602.470637:initcall: mt_soc_snd_init 116.117692ms
[ 9.602562] .(1)[1:swapper/0]Mirror/redirect action on
[ 9.602599] .(1)[1:swapper/0]u32 classifier
[ 9.602602] .(1)[1:swapper/0] Performance counters on
[ 9.602606] .(1)[1:swapper/0] input device check on
[ 9.602609] .(1)[1:swapper/0] Actions configured
[ 9.602644] .(1)[1:swapper/0]Netfilter messages via NETLINK v0.30.
[ 9.602703] .(1)[1:swapper/0]nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.603096] .(1)[1:swapper/0]ctnetlink v0.93: registering with nfnetlink.
[ 9.603846] .(1)[1:swapper/0]xt_time: kernel timezone is -0000
[ 9.603974] .(1)[1:swapper/0]ipip: IPv4 over IPv4 tunneling driver
[ 9.604366] .(1)[1:swapper/0]IPv4 over IPsec tunneling driver
[ 9.604919] .(1)[1:swapper/0]ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.605117] .(1)[1:swapper/0]arp_tables: (C) 2002 David S. Miller
[ 9.605187] .(1)[1:swapper/0]TCP: cubic registered
[ 9.605198] .(1)[1:swapper/0]Initializing XFRM netlink socket
[ 9.608364] .(1)[1:swapper/0]mip6: Mobile IPv6
[ 9.608401] .(1)[1:swapper/0]ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.609111] .(1)[1:swapper/0]sit: IPv6 over IPv4 tunneling driver
[ 9.610042] .(1)[1:swapper/0]bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 9.610070] .(1)[1:swapper/0]Bridge firewalling registered
[ 9.610084] .(1)[1:swapper/0]8021q: 802.1Q VLAN Support v1.8
[ 9.610942] .(1)[1:swapper/0][cpu_ntf] <00>ffffffc00008747c (fpsimd_cpu_hotplug_notifier)
[ 9.611008] .(1)[1:swapper/0]Registered cp15_barrier emulation handler
[ 9.611763] .(1)[1:swapper/0]Registered setend emulation handler
[ 9.611773] .(1)[1:swapper/0][cpu_ntf] <00>ffffffc00009a3b4 (insn_cpu_hotplug_notify)
[ 9.612074] .(1)[1:swapper/0][cpu_ntf] <00>ffffffc0000f71a0 (console_cpu_notify)
[ 9.612107] .(1)[1:swapper/0]Loading compiled-in X.509 certificates
[ 9.613308] .(1)[1:swapper/0]Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[ 9.614532] .(1)[1:swapper/0]Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[ 9.614562] .(1)[1:swapper/0]registered taskstats version 1
[ 9.616075] .(4)[1:swapper/0]Key type encrypted registered
[ 9.617173] .(4)[1:swapper/0][Power/dcm] [dcm_set_default]type:0x000000cb
[ 9.617181] .(4)[1:swapper/0][Power/dcm] [ ARMCORE_DCM 0x00000001] current state:1 (0)
[ 9.617194] .(4)[1:swapper/0][Power/dcm] [ MCUSYS_DCM 0x00000002] current state:1 (0)
[ 9.617201] .(4)[1:swapper/0][Power/dcm] [ PERI_DCM 0x00000008] current state:1 (0)
[ 9.617211] .(4)[1:swapper/0][Power/dcm] [ TOPCKG_DCM 0x00000040] current state:1 (0)
[ 9.617218] .(4)[1:swapper/0][Power/dcm] [ EFUSE_DCM 0x00000080] current state:1 (0)
[ 9.617223] .(4)[1:swapper/0][Power/dcm] \x0a******** dcm dump register *********
[ 9.617229] .(4)[1:swapper/0][Power/dcm] APMIXED_PLL_CON2 (0xffffff800291c008): 0x00000a0e
[ 9.617235] .(4)[1:swapper/0][Power/dcm] MCUCFG_ACLKEN_DIV (0xffffff8002912640): 0x00000012
[ 9.617241] .(4)[1:swapper/0][Power/dcm] MCUCFG_L2C_SRAM_CTRL (0xffffff8002912648): 0x00200081
[ 9.617247] .(4)[1:swapper/0][Power/dcm] MCUCFG_CCI_CLK_CTRL (0xffffff8002912660): 0x00000117
[ 9.617252] .(4)[1:swapper/0][Power/dcm] MCUCFG_BUS_FABRIC_DCM_CTRL (0xffffff8002912668): 0x00000303
[ 9.617258] .(4)[1:swapper/0][Power/dcm] TOP_CKMUXSEL (0xffffff8002916000): 0x00000005
[ 9.617263] .(4)[1:swapper/0][Power/dcm] TOP_CKDIV1 (0xffffff8002916008): 0x00000000
[ 9.617269] .(4)[1:swapper/0][Power/dcm] INFRA_TOPCKGEN_DCMCTL (0xffffff8002916010): 0x00000001
[ 9.617274] .(4)[1:swapper/0][Power/dcm] INFRA_TOPCKGEN_DCMDBC (0xffffff8002916014): 0x00000001
[ 9.617279] .(4)[1:swapper/0][Power/dcm] INFRA_GLOBALCON_DCMCTL (0xffffff8002916050): 0x00000303
[ 9.617285] .(4)[1:swapper/0][Power/dcm] INFRA_GLOBALCON_DCMDBC (0xffffff8002916054): 0x01000100
[ 9.617290] .(4)[1:swapper/0][Power/dcm] INFRA_GLOBALCON_DCMFSEL (0xffffff8002916058): 0x10100000
[ 9.617296] .(4)[1:swapper/0][Power/dcm] TOPCKG_DCM_CFG (0xffffff8002910004): 0x00e00000
[ 9.617302] .(4)[1:swapper/0][Power/dcm] PERI_GLOBALCON_DCMCTL (0xffffff8002918050): 0x000000f3
[ 9.617307] .(4)[1:swapper/0][Power/dcm] PERI_GLOBALCON_DCMDBC (0xffffff8002918054): 0x000000f0
[ 9.617313] .(4)[1:swapper/0][Power/dcm] PERI_GLOBALCON_DCMFSEL (0xffffff8002918058): 0x00000000
[ 9.617318] .(4)[1:swapper/0][Power/dcm] DRAMC_PD_CTRL (0xffffff80001ce1dc): 0xd364557a
[ 9.617324] .(4)[1:swapper/0][Power/dcm] DRAMC_CLKCTRL (0xffffff80001ce130): 0x50000000
[ 9.617330] .(4)[1:swapper/0][Power/dcm] DRAMC_PERFCTL0 (0xffffff80001ce1ec): 0x00004f11
[ 9.617335] .(4)[1:swapper/0][Power/dcm] DRAMC_GDDR3CTL1 (0xffffff80001ce0f4): 0x01f08000
[ 9.617341] .(4)[1:swapper/0][Power/dcm] DDRPHY_MEMPLL_DIVIDER (0xffffff80001d4640): 0xfe898032
[ 9.617346] .(4)[1:swapper/0][Power/dcm] EMI_CONM (0xffffff8002914060): 0x0000061a
[ 9.617352] .(4)[1:swapper/0][Power/dcm] EFUSE_REG_DCM_ON (0xffffff800291a55c): 0x00000001
[ 9.617491] .(4)[1:swapper/0][Power/clkmgr] [00][CG_INFRA]=[0x00000088]
[ 9.617497] .(4)[1:swapper/0][Power/clkmgr] [01][CG_PERI ]=[0x77fc9ffc]
[ 9.617504] .(4)[1:swapper/0][Power/clkmgr] [02][CG_DISP0]=[0xfff96bfc][0xfff06bfc]
[ 9.617509] .(4)[1:swapper/0][Power/clkmgr] [03][CG_DISP1]=[0xfffffff3]
[ 9.617514] .(4)[1:swapper/0][Power/clkmgr] [04][CG_IMAGE]=[0x00000000]
[ 9.617518] .(4)[1:swapper/0][Power/clkmgr] [05][CG_MFG ]=[0x00000000]
[ 9.617524] .(4)[1:swapper/0][Power/clkmgr] [06][CG_AUDIO]=[0x0f0c4344]
[ 9.617529] .(4)[1:swapper/0][Power/clkmgr] [07][CG_VDEC0]=[0x00000000][0x00000000]
[ 9.617535] .(4)[1:swapper/0][Power/clkmgr] [08][CG_VDEC1]=[0x00000000][0x00000000]
[ 9.617540] .(4)[1:swapper/0][Power/clkmgr] [09][CG_VENC ]=[0x00000000]
[ 9.618107] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_init: num_possible_cpus: 8
[ 9.618121] .(4)[1:swapper/0][Power/cpufreq] CPU clock-frequency from DT = 1300 MHz
[ 9.618125] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_get_cpu_level: efuse cpu_spd_bond = 0x4
[ 9.618130] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_get_cpu_level: efuse_spare2 = 0x3
[ 9.618135] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_init: PMIC 5A throttle enabled!
[ 9.618139] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_init: No ExtBuck!
[ 9.618247] .(4)[1:swapper/0][Power/cpufreq] [0] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 2886 }
[ 9.618253] .(4)[1:swapper/0][Power/cpufreq] [1] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 2663 }
[ 9.618259] .(4)[1:swapper/0][Power/cpufreq] [2] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 2525 }
[ 9.618264] .(4)[1:swapper/0][Power/cpufreq] [3] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 2343 }
[ 9.618270] .(4)[1:swapper/0][Power/cpufreq] [4] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 2330 }
[ 9.618275] .(4)[1:swapper/0][Power/cpufreq] [5] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 2164 }
[ 9.618281] .(4)[1:swapper/0][Power/cpufreq] [6] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 2050 }
[ 9.618287] .(4)[1:swapper/0][Power/cpufreq] [7] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 1997 }
[ 9.618292] .(4)[1:swapper/0][Power/cpufreq] [8] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 1949 }
[ 9.618298] .(4)[1:swapper/0][Power/cpufreq] [9] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 1803 }
[ 9.618303] .(4)[1:swapper/0][Power/cpufreq] [10] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 1757 }
[ 9.618309] .(4)[1:swapper/0][Power/cpufreq] [11] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 1705 }
[ 9.618315] .(4)[1:swapper/0][Power/cpufreq] [12] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 1664 }
[ 9.618320] .(4)[1:swapper/0][Power/cpufreq] [13] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 1464 }
[ 9.618326] .(4)[1:swapper/0][Power/cpufreq] [14] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 1461 }
[ 9.618331] .(4)[1:swapper/0][Power/cpufreq] [15] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 1443 }
[ 9.618337] .(4)[1:swapper/0][Power/cpufreq] [16] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 1432 }
[ 9.618342] .(4)[1:swapper/0][Power/cpufreq] [17] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 1331 }
[ 9.618348] .(4)[1:swapper/0][Power/cpufreq] [18] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 1253 }
[ 9.618354] .(4)[1:swapper/0][Power/cpufreq] [19] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 1218 }
[ 9.618359] .(4)[1:swapper/0][Power/cpufreq] [20] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 1171 }
[ 9.618365] .(4)[1:swapper/0][Power/cpufreq] [21] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 1082 }
[ 9.618370] .(4)[1:swapper/0][Power/cpufreq] [22] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 1074 }
[ 9.618376] .(4)[1:swapper/0][Power/cpufreq] [23] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 998 }
[ 9.618382] .(4)[1:swapper/0][Power/cpufreq] [24] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 988 }
[ 9.618387] .(4)[1:swapper/0][Power/cpufreq] [25] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 974 }
[ 9.618393] .(4)[1:swapper/0][Power/cpufreq] [26] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 895 }
[ 9.618399] .(4)[1:swapper/0][Power/cpufreq] [27] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 878 }
[ 9.618405] .(4)[1:swapper/0][Power/cpufreq] [28] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 864 }
[ 9.618410] .(4)[1:swapper/0][Power/cpufreq] [29] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 741 }
[ 9.618416] .(4)[1:swapper/0][Power/cpufreq] [30] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 730 }
[ 9.618422] .(4)[1:swapper/0][Power/cpufreq] [31] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 721 }
[ 9.618428] .(4)[1:swapper/0][Power/cpufreq] [32] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 716 }
[ 9.618434] .(4)[1:swapper/0][Power/cpufreq] [33] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 690 }
[ 9.618439] .(4)[1:swapper/0][Power/cpufreq] [34] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 665 }
[ 9.618445] .(4)[1:swapper/0][Power/cpufreq] [35] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 617 }
[ 9.618451] .(4)[1:swapper/0][Power/cpufreq] [36] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 603 }
[ 9.618457] .(4)[1:swapper/0][Power/cpufreq] [37] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 585 }
[ 9.618462] .(4)[1:swapper/0][Power/cpufreq] [38] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 537 }
[ 9.618468] .(4)[1:swapper/0][Power/cpufreq] [39] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 517 }
[ 9.618473] .(4)[1:swapper/0][Power/cpufreq] [40] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 494 }
[ 9.618479] .(4)[1:swapper/0][Power/cpufreq] [41] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 487 }
[ 9.618484] .(4)[1:swapper/0][Power/cpufreq] [42] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 8,\x09.cpufreq_power = 452 }
[ 9.618490] .(4)[1:swapper/0][Power/cpufreq] [43] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 431 }
[ 9.618496] .(4)[1:swapper/0][Power/cpufreq] [44] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 7,\x09.cpufreq_power = 395 }
[ 9.618501] .(4)[1:swapper/0][Power/cpufreq] [45] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 370 }
[ 9.618507] .(4)[1:swapper/0][Power/cpufreq] [46] = { .cpufreq_khz = 1300000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 360 }
[ 9.618512] .(4)[1:swapper/0][Power/cpufreq] [47] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 358 }
[ 9.618518] .(4)[1:swapper/0][Power/cpufreq] [48] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 345 }
[ 9.618524] .(4)[1:swapper/0][Power/cpufreq] [49] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 6,\x09.cpufreq_power = 339 }
[ 9.618530] .(4)[1:swapper/0][Power/cpufreq] [50] = { .cpufreq_khz = 1235000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 332 }
[ 9.618535] .(4)[1:swapper/0][Power/cpufreq] [51] = { .cpufreq_khz = 1144000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 292 }
[ 9.618541] .(4)[1:swapper/0][Power/cpufreq] [52] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 5,\x09.cpufreq_power = 282 }
[ 9.618547] .(4)[1:swapper/0][Power/cpufreq] [53] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 258 }
[ 9.618552] .(4)[1:swapper/0][Power/cpufreq] [54] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 247 }
[ 9.618558] .(4)[1:swapper/0][Power/cpufreq] [55] = { .cpufreq_khz = 1040000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 243 }
[ 9.618563] .(4)[1:swapper/0][Power/cpufreq] [56] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 4,\x09.cpufreq_power = 226 }
[ 9.618569] .(4)[1:swapper/0][Power/cpufreq] [57] = { .cpufreq_khz = 819000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 179 }
[ 9.618575] .(4)[1:swapper/0][Power/cpufreq] [58] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 172 }
[ 9.618580] .(4)[1:swapper/0][Power/cpufreq] [59] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 3,\x09.cpufreq_power = 169 }
[ 9.618586] .(4)[1:swapper/0][Power/cpufreq] [60] = { .cpufreq_khz = 598000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 123 }
[ 9.618592] .(4)[1:swapper/0][Power/cpufreq] [61] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 2,\x09.cpufreq_power = 113 }
[ 9.618597] .(4)[1:swapper/0][Power/cpufreq] [62] = { .cpufreq_khz = 442000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 86 }
[ 9.618603] .(4)[1:swapper/0][Power/cpufreq] [63] = { .cpufreq_khz = 299000,\x09.cpufreq_ncpu = 1,\x09.cpufreq_power = 56 }
[ 9.618611] .(4)[1:swapper/0][Power/cpufreq] MT_CPU_DVFS_LITTLE freq = 819000
[ 9.618636] .(4)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_init: limited_power_idx = 0
[ 9.618645] .(4)[1:swapper/0][register_battery_percent_notify] prio_val=1
[ 9.618649] .(4)[1:swapper/0][register_battery_oc_notify] prio_val=1
[ 9.618653] .(4)[1:swapper/0][register_low_battery_notify] prio_val=1
[ 9.618668] .(4)[1:swapper/0][Power/cpufreq] CPU DVFS init done!
[ 9.618967] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc0007b3300 (cpufreq_cpu_callback)
[ 9.618982] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc0003fa7a8 (_mt_cpufreq_cpu_CB)
[ 9.618987] .(4)[1:swapper/0][Power/cpufreq] CPU DVFS driver probe done
[ 9.619033] .(4)[1:swapper/0][Power/cpufreq] CPU DVFS pdrv init done.
[ 9.619194] .(4)[1:swapper/0][PTP] val[0]=0x11c96301
[ 9.619199] .(4)[1:swapper/0][PTP] val[1]=0x56003c
[ 9.619203] .(4)[1:swapper/0][PTP] val[2]=0x11c61a70
[ 9.619207] .(4)[1:swapper/0][PTP] val[3]=0x5dceac
[ 9.619211] .(4)[1:swapper/0][PTP] val[4]=0x50162
[ 9.619214] .(4)[1:swapper/0][PTP] val[5]=0x3
[ 9.619218] .(4)[1:swapper/0][PTP] val[6]=0x0
[ 9.619222] .(4)[1:swapper/0][PTP] val[7]=0x54000000
[ 9.619225] .(4)[1:swapper/0][PTP] p->PTPINITEN=0x1
[ 9.619229] .(4)[1:swapper/0][PTP] p->PTPMONEN=0x1
[ 9.619498] .(4)[1:swapper/0][PTP] Set PTP IRQ OK.
[ 9.619629] .(4)[1:swapper/0][Power/cpufreq] _mt_cpufreq_calc_new_opp_idx(): for ptpod init, idx = 2
[ 9.619913] .(4)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1200mv, freq = 1144000 KHz
[ 9.619938] .(4)[1:swapper/0][PTP] det name=PTP_DET_CPU,det_id=0
[ 9.619955] .(4)[1:swapper/0][PTP] @ptp_init_det(), det->VBOOT = 80
[ 9.619981] .(4)[1:swapper/0][PTP] @ptp_init01(),vboot = 80
[ 9.619986] -(4)[1:swapper/0][PTP] base_ops_init01(PTP_DET_CPU) start (ptp_level = 0x00000000).
[ 9.620144] -(4)[1:swapper/0][PTP] ptp_set_ptp_volt(): cur_temp = 29900, valid = 0
[ 9.620295] .(4)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1100mv, freq = 819000 KHz
[ 9.620981] .(4)[1:swapper/0]#@# fsnotify(204) mask 0x40000100, file_name spm
[ 9.620985] .(4)[1:swapper/0]------------[ cut here ]------------
[ 9.621000] .(4)[1:swapper/0]WARNING: CPU: 4 PID: 1 at /usr/src/p0/kernel-3.18/fs/notify/fsnotify.c:205 fsnotify+0x384/0x3ac()
[ 9.621005] .(4)[1:swapper/0]Modules linked in:
[ 9.621009] .(4)[1:swapper/0]
[ 9.621018] -(4)[1:swapper/0]CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.18.119 #1
[ 9.621023] -(4)[1:swapper/0]Hardware name: MT6753 (DT)
[ 9.621027] -(4)[1:swapper/0]Call trace:
[ 9.621039] -(4)[1:swapper/0][<ffffffc00008bb44>] dump_backtrace+0x0/0x1d0
[ 9.621048] -(4)[1:swapper/0][<ffffffc00008bd28>] show_stack+0x14/0x1c
[ 9.621056] -(4)[1:swapper/0][<ffffffc000a9c650>] dump_stack+0x90/0xb8
[ 9.621065] -(4)[1:swapper/0][<ffffffc0000a28e4>] warn_slowpath_null+0x6c/0xb4
[ 9.621073] -(4)[1:swapper/0][<ffffffc000205120>] fsnotify+0x384/0x3ac
[ 9.621083] -(4)[1:swapper/0][<ffffffc0002cf1c0>] debugfs_create_dir+0xd8/0x13c
[ 9.621092] -(4)[1:swapper/0][<ffffffc00040a06c>] spm_module_late_init+0x1bc/0x348
[ 9.621099] -(4)[1:swapper/0][<ffffffc000082a5c>] do_one_initcall+0xc4/0x1f4
[ 9.621109] -(4)[1:swapper/0][<ffffffc000eaac1c>] kernel_init_freeable+0x138/0x1d8
[ 9.621117] -(4)[1:swapper/0][<ffffffc000a96ed4>] kernel_init+0x18/0x150
[ 9.621122] .(4)[1:swapper/0]---[ end trace 5d0550754f78e697 ]---
[ 9.621204] .(4)[1:swapper/0][cpu_ntf] <00>ffffffc000413108 (cpu_hotplug_handler)
[ 9.621242] .(4)[1:swapper/0]<ALS/PS> alsps_probe 1117 : alsps real driver init fail
[ 9.621247] .(4)[1:swapper/0]<ALS/PS> alsps_probe 1127 : ----alsps_probe fail !!!
[ 9.621252] .(4)[1:swapper/0]<ALS/PS> alsps_init 1155 : failed to register alsps driver
[ 9.621540] .(4)[1:swapper/0][Gsensor] mc3xxx_local_init
[ 9.621633] .(4)[1:swapper/0][Gsensor] mc3xxx_i2c_probe
[ 9.621817] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.621822] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.621826] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.621837] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.621842] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.621857] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.621867] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.621881] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.621885] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.621902] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.622064] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.622069] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.622072] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.622084] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.622088] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.622103] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.622113] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622126] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622130] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.622140] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (4 ffffffc0bd8d7a68 1) -22
[ 9.622303] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.622308] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.622311] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.622322] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.622327] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.622342] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.622352] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622365] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622369] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.622376] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.622539] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.622544] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.622547] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.622558] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.622563] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.622578] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.622588] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622602] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622607] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.622615] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.622778] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.622783] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.622786] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.622797] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.622801] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.622817] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.622827] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622840] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.622844] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.622851] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.628015] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.628019] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.628023] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.628034] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.628039] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.628054] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.628063] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.628077] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.628081] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.628088] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.628249] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.628253] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.628257] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.628268] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.628272] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.628288] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.628297] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.628310] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.628314] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.628321] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.632406] .(4)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1200mv, freq = 1300000 KHz
[ 9.633474] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.633477] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.633480] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.633487] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.633490] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.633501] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.633508] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633518] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633520] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.633527] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (33 ffffffc0012e2b58 6) -22
[ 9.633679] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.633682] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.633684] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.633691] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.633694] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.633706] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.633712] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633721] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633724] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.633730] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (4 ffffffc0bd8d7a68 1) -22
[ 9.633884] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.633887] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.633890] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.633897] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.633899] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.633911] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=2\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1210\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.633917] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633927] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.633930] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.633934] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_write_block 365 : send command error!!
[ 9.634087] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4c, transfer error
[ 9.634090] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.634093] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.634100] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.634103] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.634117] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=98,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.634124] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634133] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634136] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.634142] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.634294] .(0)[1:swapper/0]ERROR,510: id=2,addr: 6c, transfer error
[ 9.634297] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.634300] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.634307] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.634310] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.634321] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=d8,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.634327] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634337] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634339] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.634346] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.634499] .(0)[1:swapper/0]ERROR,510: id=2,addr: 4e, transfer error
[ 9.634502] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.634505] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.634512] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.634515] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.634526] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=9c,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.634533] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634543] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634546] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.634552] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.634705] .(0)[1:swapper/0]ERROR,510: id=2,addr: 6d, transfer error
[ 9.634708] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.634710] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.634717] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.634720] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.634732] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=da,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.634738] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634748] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634751] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.634757] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.634909] .(0)[1:swapper/0]ERROR,510: id=2,addr: 6e, transfer error
[ 9.634912] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.634915] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.634922] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.634924] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.634936] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=dc,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.634942] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634952] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.634954] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.634961] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.635114] .(0)[1:swapper/0]ERROR,510: id=2,addr: 6f, transfer error
[ 9.635117] .(0)[1:swapper/0]ERROR,516: I2C_ACKERR
[ 9.635119] .(0)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
[ 9.635126] .(0)[1:swapper/0]I2C structure:\x0a[I2C]Clk=17062,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=2\x0a[I2C]Trans_len=1,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=100\x0a[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
[ 9.635129] .(0)[1:swapper/0]base address 0xffffff8000dbc000
[ 9.635141] .(0)[1:swapper/0]I2C register:\x0a[I2C]SLAVE_ADDR=de,INTR_MASK=f8,INTR_STAT=1,CONTROL=28,TRANSFER_LEN=1\x0a[I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1410,START=0,FIFO_STAT=1101\x0a[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=0
[ 9.635147] .(0)[1:swapper/0]before enable DMA register(0x0):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.635157] .(0)[1:swapper/0]DMA register(0xffffff8000db2280):\x0a[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,\x0a[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0\x0a[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 9.635160] .(0)[1:swapper/0]I2C(2) dump info------------------------------
[ 9.635166] .(0)[1:swapper/0][Gsensor] MC3XXX_i2c_read_block 332 : i2c_transfer error: (59 ffffffc0bd8d7b48 1) -22
[ 9.635171] .(0)[1:swapper/0][Gsensor] mc3xxx_i2c_probe 2415 : mc3xxx_i2c_probe: err = -5
[ 9.635188] .(0)[1:swapper/0]MC3XXX: probe of 2-004c failed with error -5
[ 9.635232] .(0)[1:swapper/0]i2c-core: driver [MC3XXX] using legacy suspend method
[ 9.635235] .(0)[1:swapper/0]i2c-core: driver [MC3XXX] using legacy resume method
[ 9.635248] .(0)[1:swapper/0]<ACCELEROMETER> acc_probe 766 : acc real driver init fail
[ 9.635252] .(0)[1:swapper/0]<ACCELEROMETER> acc_probe 780 : ----accel_probe fail !!!
[ 9.635256] .(0)[1:swapper/0]<ACCELEROMETER> acc_init 805 : failed to register acc driver
[ 9.635281] -(0)[1:swapper/0]mtk_rtc_hal_common: RTC_IRQ_EN = 0x8, RTC_PDN1 = 0x0
[ 9.635285] -(0)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[12] = {16432, 1, 6}
[ 9.635292] .(0)[1:swapper/0]mtk_rtc_common: There is Crystal
[ 9.635518] .(0)[1:swapper/0][DEVAPC] module init.
[ 9.635918] .(0)[1:swapper/0][DEVAPC] module probe.
[ 9.636032] .(0)[1:swapper/0][DEVAPC] AO_ADDRESS ffffff8002920000
[ 9.636127] .(0)[1:swapper/0][DEVAPC] PD_ADDRESS ffffff8002922000, IRD: 166
[ 9.636140] .(0)[1:swapper/0][DEVAPC] Making SMC call to ATF.
[ 9.637554] .(1)[1:swapper/0][C2K] c2k_gpio_request_irq gpio 210 irq 498
[ 9.637861] .(1)[1:swapper/0][C2K] c2k_gpio_request_irq gpio 211 irq 499
[ 9.638001] .(1)[1:swapper/0][C2K] c2k_gpio_request_irq gpio 212 irq 500
[ 9.640201] -(6)[0:swapper/6][PTP] ptp_set_ptp_volt(): cur_temp = 29900, valid = 0
[ 9.641440] .(0)[1:swapper/0][C2K MODEM] cbp_init success to register PM notifier
[ 9.642067] .(4)[1:swapper/0][MUSB]musb_gadget_pullup 2129: is_on=0, softconnect=0 ++
[ 9.642076] .(4)[1:swapper/0][MUSB]musb_gadget_pullup 2139: is_on=0, softconnect=0 ++
[ 9.642089] .(4)[1:swapper/0][MUSB]usb_cable_connected 689: usb_cable_connected vbus_exist=1 type=0
[ 9.642134] .(7)[1:swapper/0][MUSB]usb_cable_connected 711: usb_cable_connected, connected:0, cable_mode:1
[ 9.642151] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_ffs, f->name = ffs
[ 9.642207] .(7)[1:swapper/0]file system registered
[ 9.642212] .(7)[1:swapper/0][USB]android_init_functions: init ffs success!!
[ 9.642219] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_acm, f->name = acm
[ 9.642371] .(7)[1:swapper/0][USB]android_init_functions: init acm success!!
[ 9.642381] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_mtp, f->name = mtp
[ 9.642532] .(7)[1:swapper/0][USB]android_init_functions: init mtp success!!
[ 9.642537] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_ptp, f->name = ptp
[ 9.642566] .(7)[1:swapper/0][USB]android_init_functions: init ptp success!!
[ 9.642570] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_eem, f->name = eem
[ 9.642594] .(7)[1:swapper/0][USB]android_init_functions: init eem success!!
[ 9.642603] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_gser, f->name = gser
[ 9.642751] .(7)[1:swapper/0][USB]android_init_functions: init gser success!!
[ 9.642759] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_rndis, f->name = rndis
[ 9.642783] .(7)[1:swapper/0][USB]android_init_functions: init rndis success!!
[ 9.642795] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_mass_storage, f->name = mass_storage
[ 9.642823] .(7)[1:swapper/0]Number of LUNs=8
[ 9.642830] .(7)[1:swapper/0]Mass Storage Function, version: 2009/09/11
[ 9.642834] .(7)[1:swapper/0]LUN: removable file: (no medium)
[ 9.642840] .(7)[1:swapper/0]Number of LUNs=1
[ 9.642863] .(7)[1:swapper/0]LUN: removable file: (no medium)
[ 9.642866] .(7)[1:swapper/0]Number of LUNs=1
[ 9.642947] .(7)[1:swapper/0][USB]android_init_functions: init mass_storage success!!
[ 9.642958] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_accessory, f->name = accessory
[ 9.643024] .(7)[1:swapper/0][USB]android_init_functions: init accessory success!!
[ 9.643028] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_audio_source, f->name = audio_source
[ 9.643060] .(7)[1:swapper/0][USB]android_init_functions: init audio_source success!!
[ 9.643065] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_midi, f->name = midi
[ 9.643089] .(7)[1:swapper/0][USB]android_init_functions: init midi success!!
[ 9.643095] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_via_modem, f->name = via_modem
[ 9.643119] .(7)[1:swapper/0][USB]android_init_functions: init via_modem success!!
[ 9.643123] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_via_ets, f->name = via_ets
[ 9.643145] .(7)[1:swapper/0][USB]android_init_functions: init via_ets success!!
[ 9.643150] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_via_atc, f->name = via_atc
[ 9.643177] .(7)[1:swapper/0][USB]android_init_functions: init via_atc success!!
[ 9.643181] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_via_pcv, f->name = via_pcv
[ 9.643204] .(7)[1:swapper/0][USB]android_init_functions: init via_pcv success!!
[ 9.643208] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_via_gps, f->name = via_gps
[ 9.643231] .(7)[1:swapper/0][USB]android_init_functions: init via_gps success!!
[ 9.643235] .(7)[1:swapper/0][USB]android_init_functions: f->dev_name = f_hid, f->name = hid
[ 9.643277] .(7)[1:swapper/0][USB]android_init_functions: init hid success!!
[ 9.643288] .(7)[1:swapper/0]android_usb gadget: android_usb ready
[ 9.643292] .(7)[1:swapper/0][MUSB]musb_gadget_start 2338: musb_gadget_start
[ 9.643300] .(7)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 9.643317] .(7)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
[ 9.643713] .(7)[1:swapper/0]hub 1-0:1.0: USB hub found
[ 9.643739] .(7)[1:swapper/0]hub 1-0:1.0: 1 port detected
[ 9.643798] -(7)[1:swapper/0][MUSB]musb_hub_control 365: try to call musb_start in virthub
[ 9.644863] .(0)[204:kworker/u16:4]mtk-tpd: enter tpd_probe, 457
[ 9.645023] .(0)[204:kworker/u16:4][HXTP] [Himax] Himax_ts I2C Touchscreen Driver local init
[ 9.645140] .(0)[204:kworker/u16:4]frank_zhonghua:Himax_probe_start
[ 9.645143] .(0)[204:kworker/u16:4]frank_zhonghua1:himax852xes_probe,5d
[ 9.645223] .(0)[204:kworker/u16:4]junpiao: dma_alloc_coherent
[ 9.645226] .(0)[204:kworker/u16:4]frank_zhonghua1_himax_client-addr = 5d
[ 9.645229] .(0)[204:kworker/u16:4]frank_zhonghua2_himax_client-addr = 48
[ 9.645232] .(0)[204:kworker/u16:4]junpiao: i2c_set_clientdata
[ 9.645237] .(0)[204:kworker/u16:4][HXTP] DT-himax_parse_dt:display-coords = (0, 0)
[ 9.645241] .(0)[204:kworker/u16:4][HXTP] DT:gpio_3v3_en value is not valid
[ 9.645244] .(0)[204:kworker/u16:4][HXTP] DT:gpio_irq=1, gpio_rst=0, gpio_3v3_en=-2
[ 9.645248] .(0)[204:kworker/u16:4][HXTP] DT-No vk info in DT
[ 9.645252] .(0)[204:kworker/u16:4][HXTP] himax852xes_probe:panel-coords = 0, 720, 0, 1280
[ 9.645255] .(0)[204:kworker/u16:4][HXTP] himax852xes_probe:display-coords = (720, 1280)
[ 9.645553] -(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 9.645565] -(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,282), [1] = (0,159), [2] = (0,171), [3] = (0,123), [4] = (0,187), [5] = (0,86), [6] = (0,131), [7] = (0,126),
[ 9.645573] -(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 0, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0, [by_frm] = 1259,
[ 9.645580] -(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 9.645686] .(7)[1:swapper/0]mt-rtc mt-rtc: setting system clock to 2010-01-01 00:01:38 UTC (1262304098)
[ 9.760990] -(1)[11:migration/1][PTP] ptp_set_ptp_volt(): cur_temp = 29900, valid = 0
[ 9.781121] -(3)[19:migration/3][PTP] ptp_set_ptp_volt(): cur_temp = 29900, valid = 0
[ 10.186530] .(4)[70:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x2000
[ 10.187223] .(0)[117:hps_main][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08>
[ 10.187225] .(0)[117:hps_main][HPS] (0200)(8)action end(110)(299)(0)(0) (8)(8)(8)(8)(1) (0)(0)(0) (4467)(90)(2) (0)(299)(90)(0)(299)
[ 10.187359] -(2)[37:kworker/7:0][MUSB]musb_hub_control 347: port status 00000100,devctl=0x99
[ 10.189630] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa>
[ 10.189649] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189666] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189682] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189701] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189719] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189736] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189754] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189773] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189800] .(5)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<1> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.189802] .(5)[162:kworker/u16:2][sd]error...[msdc_set_smt] host->id out of range!!!
[ 10.189805] .(5)[162:kworker/u16:2][sd]error...[msdc_set_driving] host->id out of range!!!
[ 10.189811] .(5)[162:kworker/u16:2][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 10.200839] .(5)[162:kworker/u16:2][sd]msdc3 -> !!! Set<0 Hz>
[ 10.200841] .(5)[162:kworker/u16:2][sd]error...[msdc_set_smt] host->id out of range!!!
[ 10.200844] .(5)[162:kworker/u16:2][sd]error...[msdc_set_driving] host->id out of range!!!
[ 10.200849] .(5)[162:kworker/u16:2][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 10.200854] .(5)[162:kworker/u16:2][sd]msdc3 -> No power control, host_function<2> & Power_domain<0> <- msdc_set_power_mode() : L<2976> PID<kworker/u16:2><0xa2>
[ 10.213691] .(4)[70:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
[ 10.221433] .(1)[162:kworker/u16:2][sd]msdc3 Set<260K> src:<200000K> sclk:<259K> timing<0> mode:0 div:193
[ 10.241376] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00>
[ 10.242440] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08>
[ 10.246812] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa>
[ 10.247697] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.249046] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.249929] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.251275] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.252178] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.253537] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.254433] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.255791] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.256687] .(1)[162:kworker/u16:2][sd][msdc_command_resp_polling]: msdc3 XXX CMD<1> MSDC_INT_CMDTMO Arg<0x00000000>
[ 10.258049] .(1)[162:kworker/u16:2][sd]error...[msdc_set_smt] host->id out of range!!!
[ 10.259062] .(1)[162:kworker/u16:2][sd]error...[msdc_set_driving] host->id out of range!!!
[ 10.260127] .(1)[162:kworker/u16:2][sd]error...[msdc_pin_pud] host->id out of range!!!
[ 10.271144] .(0)[204:kworker/u16:4][sd]msdc3 -> !!! Set<0 Hz>
[ 10.391361] .(0)[204:kworker/u16:4]mtk-tpd: mtk_tpd: himax reset over
[ 10.392470] .(0)[204:kworker/u16:4][HXTP] Himax IC package 852x ES
[ 10.451367] .(1)[204:kworker/u16:4][HXTP] sensor_id=22.
[ 10.451930] .(4)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 299000 KHz
[ 10.452076] .(1)[204:kworker/u16:4][HXTP] fw_ver=e3,3.
[ 10.452765] .(1)[204:kworker/u16:4][HXTP] config_ver=1.
[ 10.791834] .(1)[204:kworker/u16:4][HXTP] himax_calculateChecksum 0xAD[0,1,2,3] = 0,0,0,0
[ 10.793102] .(1)[204:kworker/u16:4][HXTP] himax_loadSensorConfig: TOUCH DEBUG 1
[ 10.794404] .(1)[204:kworker/u16:4][HXTP] himax_power_on_initCMD:
[ 11.005265] .(0)[117:hps_main][HPS] (0200)(7)action end(0)(0)(0)(0) (8)(8)(8)(8)(1) (3)(8)(0) (588)(8)(0) (0)(0)(8)(0)(0)
[ 11.011472] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:IC_TYPE =6
[ 11.171951] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:Touch Panel Type=0
[ 11.251419] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:HX_RX_NUM =13,HX_TX_NUM =23,HX_MAX_PT=10
[ 11.252984] .(0)[204:kworker/u16:4][HXTP] config_ver=1.
[ 11.351411] .(0)[204:kworker/u16:4][HXTP] himax_loadSensorConfig: initialization complete
[ 11.352491] .(0)[204:kworker/u16:4][HXTP] calcDataSize: coord_data_size: 40, area_data_size:12, raw_data_frame_size:67, raw_data_nframes:1[HXTP] himax852xes_probe: calcDataSize complete
[ 11.354318] .(0)[204:kworker/u16:4][HXTP] himax852xes_probe: Use Protocol Type A
[ 11.355327] .(0)[204:kworker/u16:4][HXTP] input_set_abs_params: min_x 0, max_x 720, min_y 0, max_y 1280
[ 11.356925] .(0)[204:kworker/u16:4]input: himax-touchscreen as /devices/virtual/input/input3
[ 11.358327] .(0)[204:kworker/u16:4]himax_sys_self_test_init
[ 11.359100] .(0)[204:kworker/u16:4][HXTP] himax_sys_self_test_init success
[ 11.360008] .(0)[204:kworker/u16:4]Himax_interrupt = himax_ts_register_interrupt
[ 11.366162] .(0)[204:kworker/u16:4]hxtp:himax_touch_irq=0d
[ 11.366917] .(0)[204:kworker/u16:4][HXTP] himax_ts_register_interrupt: client->irq is empty, use polling mode.
[ 11.378594] .(0)[204:kworker/u16:4][HXTP] himax_ts_register_interrupt: polling mode enabled
[ 11.379975] .(0)[204:kworker/u16:4][HXTP][ERROR] deng, read_FW_version(): succeed!
[ 11.381007] .(0)[204:kworker/u16:4]frank_zhonghua:Himax_probe_end
[ 11.382028] .(0)[204:kworker/u16:4]BOOTPROF: 11382.010410:probe: probe=i2c_device_probe drv=Himax852xes(ffffffc000ff20c0) 1736.843235ms
[ 11.383847] .(0)[204:kworker/u16:4][HXTP] end himax852xes_local_init, 7330
[ 11.384758] .(0)[204:kworker/u16:4]mtk-tpd: [mtk-tpd]tpd_probe, tpd_driver_name=Himax852xes
[ 11.396180] .(0)[204:kworker/u16:4]mtk-tpd: Cap touch panel driver
[ 11.397351] .(0)[204:kworker/u16:4]input: mtk-tpd as /devices/virtual/input/input2
[ 11.398530] .(0)[204:kworker/u16:4]BOOTPROF: 11398.514257:probe: probe=platform_drv_probe drv=mtk-tpd(ffffffc000ff1ba0) 1753.648850ms
[ 11.401093] .(0)[1:swapper/0]******** battery_dts_probe!! ********
[ 11.402600] .(0)[1:swapper/0]******** battery driver probe!! ********
[ 11.403635] .(0)[1:swapper/0][BAT_probe] adc_cali prepare : done !!\x0a
[ 11.404259] .(0)[1:swapper/0]battery custom init by DTS
[ 11.405318] .(0)[1:swapper/0]Get stop_charging_in_takling failed
[ 11.406117] .(0)[1:swapper/0]Get talking_recharge_voltage failed
[ 11.406915] .(0)[1:swapper/0]Get talking_sync_time failed
[ 11.407770] .(0)[1:swapper/0]Get mtk_temperature_recharge_support failed
[ 11.408672] .(0)[1:swapper/0]Get max_charge_temperature failed
[ 11.409450] .(0)[1:swapper/0]Get max_charge_temperature_minus_x_degree failed
[ 11.410389] .(0)[1:swapper/0]Get min_charge_temperature failed
[ 11.411165] .(0)[1:swapper/0]Get min_charge_temperature_plus_x_degree failed
[ 11.412132] .(0)[1:swapper/0]Get err_charge_temperature failed
[ 11.412910] .(0)[1:swapper/0]Get v_pre2cc_thres failed
[ 11.413600] .(0)[1:swapper/0]Get v_cc2topoff_thres failed
[ 11.414321] .(0)[1:swapper/0]Get recharging_voltage failed
[ 11.415053] .(0)[1:swapper/0]Get charging_full_current failed
[ 11.415817] .(0)[1:swapper/0]Get config_usb_if failed
[ 11.416495] .(0)[1:swapper/0]Get usb_charger_current_suspend failed
[ 11.417443] .(0)[1:swapper/0]Get usb_charger_current_unconfigured failed
[ 11.418349] .(0)[1:swapper/0]Get usb_charger_current_configured failed
[ 11.419212] .(0)[1:swapper/0]Get usb_charger_current failed
[ 11.419955] .(0)[1:swapper/0]Get ac_charger_input_current failed
[ 11.420753] .(0)[1:swapper/0]Get ac_charger_current failed
[ 11.421771] .(0)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 11.421833] .(0)[1:swapper/0]Get non_std_ac_charger_current failed
[ 11.422629] .(0)[1:swapper/0]Get charging_host_charger_current failed
[ 11.423463] .(0)[1:swapper/0]Get apple_0_5a_charger_current failed
[ 11.424266] .(0)[1:swapper/0]Get apple_1_0a_charger_current failed
[ 11.425069] .(0)[1:swapper/0]Get apple_2_1a_charger_current failed
[ 11.425871] .(0)[1:swapper/0]Get bat_low_temp_protect_enable failed
[ 11.426688] .(0)[1:swapper/0]Get v_charger_enable failed
[ 11.427379] .(0)[1:swapper/0]Get v_charger_max failed
[ 11.428040] .(0)[1:swapper/0]Get v_charger_min failed
[ 11.428702] .(0)[1:swapper/0]Get onehundred_percent_tracking_time failed
[ 11.429570] .(0)[1:swapper/0]Get npercent_tracking_time failed
[ 11.430329] .(0)[1:swapper/0]Get sync_to_real_tracking_time failed
[ 11.431132] .(0)[1:swapper/0]Get v_0percent_tracking failed
[ 11.431869] .(0)[1:swapper/0]Get high_battery_voltage_support failed
[ 11.432686] .(0)[1:swapper/0]Get mtk_jeita_standard_support failed
[ 11.433489] .(0)[1:swapper/0]Get cust_soc_jeita_sync_time failed
[ 11.434269] .(0)[1:swapper/0]Get jeita_recharge_voltage failed
[ 11.435029] .(0)[1:swapper/0]Get jeita_temp_above_pos_60_cv_voltage failed
[ 11.435956] .(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_cv_voltage failed
[ 11.436883] .(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_cv_voltage failed
[ 11.437804] .(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_cv_voltage failed
[ 11.438726] .(0)[1:swapper/0]Get jeita_temp_below_neg_10_cv_voltage failed
[ 11.439615] .(0)[1:swapper/0]Get jeita_neg_10_to_pos_0_full_current failed
[ 11.440505] .(0)[1:swapper/0]Get jeita_temp_pos_45_to_pos_60_recharge_voltage failed
[ 11.441518] .(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_recharge_voltage failed
[ 11.442510] .(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_recharge_voltage failed
[ 11.443496] .(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_recharge_voltage failed
[ 11.444486] .(0)[1:swapper/0]Get jeita_temp_pos_45_to_pos_60_cc2topoff_threshold failed
[ 11.445514] .(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_cc2topoff_threshold failed
[ 11.446544] .(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_cc2topoff_threshold failed
[ 11.447564] .(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_cc2topoff_threshold failed
[ 11.448584] .(0)[1:swapper/0]get_boot_mode=0
[ 11.449146] .(0)[1:swapper/0][BAT_probe] g_platform_boot_mode = 0\x0a
[ 11.449825] .(0)[1:swapper/0][BAT_probe] power_supply_register AC Success !!
[ 11.450847] .(0)[1:swapper/0][BAT_probe] power_supply_register USB Success !!
[ 11.451860] .(0)[1:swapper/0][BAT_probe] power_supply_register WIRELESS Success !!
[ 11.453016] .(0)[1:swapper/0][BAT_probe] power_supply_register Battery Success !!
[ 11.454129] .(0)[1:swapper/0]battery_kthread_hrtimer_init : done
[ 11.454971] .(0)[1:swapper/0][battery_probe] bat_thread_kthread Done
[ 11.456537] .(0)[1:swapper/0]charger_hv_detect_sw_workaround_init : done
[ 11.457428] .(0)[1:swapper/0]proc_create bat_proc_fops
[ 11.458105] .(0)[1:swapper/0]BOOTPROF: 11458.102026:probe: probe=platform_drv_probe drv=battery(ffffffc000ff66b8) 55.506616ms
[ 11.459650] .(0)[1:swapper/0]BOOTPROF: 11459.646180:probe: pdev=battery(ffffffc000ff63b8) 57.681231ms
[ 11.460908] .(0)[1:swapper/0]BOOTPROF: 11460.905257:probe: probe=platform_drv_probe drv=battery-dts(ffffffc000ff6818) 59.825539ms
[ 11.463211] .(0)[1:swapper/0]******** mt_batteryNotify_dts_probe!! ********
[ 11.464330] .(0)[1:swapper/0]******** mt_batteryNotify_probe!! ********
[ 11.465313] .(0)[1:swapper/0]proc_create battery_cmd_proc_fops
[ 11.466067] .(0)[1:swapper/0]proc_create current_cmd_proc_fops
[ 11.466826] .(0)[1:swapper/0]proc_create discharging_cmd_proc_fops
[ 11.467626] .(0)[1:swapper/0]******** mtk_battery_cmd!! ********
[ 11.468612] .(0)[1:swapper/0]****[battery_driver] Initialization : DONE !!
[ 11.469504] .(0)[1:swapper/0]BOOTPROF: 11469.500718:initcall: battery_init 1823.799928ms
[ 11.480860] .(0)[1:swapper/0]lowmemorykiller: lowmem_init: successful to register misc device!
[ 11.482173] .(0)[1:swapper/0]vaud28: disabling
[ 11.482754] .(0)[1:swapper/0]vaud28: couldn't disable: -1
[ 11.483526] .(0)[1:swapper/0]vsram: disabling
[ 11.484093] .(0)[1:swapper/0]vsram: couldn't disable: -1
[ 11.484793] .(0)[1:swapper/0]vm: disabling
[ 11.485330] .(0)[1:swapper/0]vm: couldn't disable: -1
[ 11.486141] -(0)[1:swapper/0][DFS]dfs_dummy_buffer va: 0xffffffc0013cf000, dst_pa: 0x413cf000, size: 256
[ 11.487372] .(0)[1:swapper/0][VcoreFS] [late_init_to_lowpwr_opp] feature_en: 1, late_init_opp: 1
[ 11.489015] .(0)[1:swapper/0][C2K] c2k_gpio_request_irq gpio 208 irq 496
[ 11.489984] .(0)[1:swapper/0]ALSA device list:
[ 11.490563] .(0)[1:swapper/0] #0: mt-snd-card
[ 11.491389] .(0)[1:swapper/0]md: Waiting for all devices to be available before autodetect
[ 11.492445] .(0)[1:swapper/0]md: If you don't use raid, use raid=noautodetect
[ 11.493665] .(0)[1:swapper/0]md: Autodetecting RAID arrays.
[ 11.494386] .(0)[1:swapper/0]md: Scanned 0 and added 0 devices.
[ 11.495155] .(0)[1:swapper/0]md: autorun ...
[ 11.495719] .(0)[1:swapper/0]md: ... autorun DONE.
[ 11.496352] .(0)[1:swapper/0]dm: attempting early device configuration.
[ 11.498806] .(0)[264:wdtk-0][thread:264][RT:11498795949] 2010-01-01 00:01:39.853958 UTC;android time 2010-01-01 00:01:39.853958
[ 11.507640] .(0)[1:swapper/0]device-mapper: init: adding target '0 1 android-verity PARTUUID=e195a981-e285-4734-8025-ec323e9589d9 '
[ 11.509235] .(0)[1:swapper/0]device-mapper: android-verity: key:id:7e4333f9bba00adfe0ede979e28ed1920492b40f dev:PARTUUID=e195a981-e285-4734-8025-ec323e9589d9
[ 11.511935] .(0)[1:swapper/0]device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:284
[ 11.513354] .(0)[1:swapper/0]device-mapper: android-verity: verity_table: 1 /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system 4096 4096 774155 774155 sha256 6669d35caa1716210bc11e0cd845ffdfdecca23f2fc6c252a5c90d7549f945d2 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7
[ 11.518048] .(0)[1:swapper/0]device-mapper: android-verity: Signature verification success
[ 11.519110] .(0)[1:swapper/0]device-mapper: android-verity: Data sectors 6193240
[ 11.523994] -(0)[261:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 11.534760] .(0)[261:bat_thread_kthr]UI_SOC=(100), resetBatteryMeter=(0)
[ 11.535698] .(0)[261:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 100
[ 11.536646] .(0)[261:bat_thread_kthr][DLPT_POWER_OFF_EN] run
[ 11.537393] .(0)[261:bat_thread_kthr][battery_meter_initilized] uisoc=soc=100.
[ 11.540477] .(0)[1:swapper/0]device-mapper: android-verity: android-verity mounted as verity target
[ 11.552126] .(0)[1:swapper/0]dm: dm-0 is ready
[ 11.555896] .(0)[1:swapper/0]EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[ 11.557473] .(0)[1:swapper/0]EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
[ 11.572847] .(0)[1:swapper/0]EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 11.573965] .(0)[204:kworker/u16:4][WDK] WDT start kicker done CPU_NR=8
[ 11.574861] .(0)[204:kworker/u16:4][cpu_ntf] <00>ffffffc0007835c4 (wk_cpu_callback)
[ 11.575938] .(0)[204:kworker/u16:4][WDK]init_wk done late_initcall cpus_kick_bit=0x1 -----
[ 11.577043] .(0)[1:swapper/0]VFS: Mounted root (ext4 filesystem) readonly on device 252:0.
[ 11.578336] .(0)[1:swapper/0]Freeing unused kernel memory: 512K
[ 11.579173] .(0)[1:swapper/0]Freeing alternatives memory: 176K
[ 11.579950] .(0)[1:swapper/0]BOOTPROF: 11579.945872:Kernel_init_done
[ 11.601554] .(0)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1081mv, freq = 1040000 KHz
[ 11.606443] .(0)[1:init]init: init first stage started!
[ 11.607707] .(0)[1:init]init: Using Android DT directory /proc/device-tree/firmware/android/
[ 11.610889] .(0)[1:init]init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[ 11.621583] .(0)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1118mv, freq = 1144000 KHz
[ 11.641581] .(0)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 11.686791] .(0)[1:init]musb-hdrc musb-hdrc.0.auto: prop=1, power=0, is_host=0
[ 11.687732] .(0)[1:init]musb-hdrc musb-hdrc.0.auto: prop=2, power=0, is_host=0
[ 11.688662] .(0)[1:init]musb-hdrc musb-hdrc.0.auto: prop=3, power=0, is_host=0
[ 11.709564] -(1)[0:swapper/1]Detected VIPT I-cache on CPU1
[ 11.710123] .(0)[117:hps_main][HPS] (0020)(1)action end(100)(105)(0)(1) (8)(8)(8)(8)(1) (148)(6)(0) (0)(0)(0) (1)(105)(7)(0)(105)
[ 11.741475] .(0)[261:bat_thread_kthr][MUSB]Charger_Detect_Init 693: Charger_Detect_Init
[ 11.801636] .(0)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 819000 KHz
[ 11.841582] .(1)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 11.881483] .(1)[1:init]init: [libfs_mgr]Enabling dm-verity for vendor (mode 2)
[ 11.882499] .(1)[1:init]init: [libfs_mgr]loading verity table: '1 /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/vendor /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/vendor 4096 4096 72566 72566 sha256 0622a125b535cc75fe5fd6d08586095a27ec0c7bf03969ef7ff11b4ba6ea212c aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/vendor fec_start 73147 fec_blocks 73147 fec_roots 2 ignore_zero_blocks'
[ 11.888326] .(1)[1:init]device-mapper: table: 252:1: verity: Invalid number of feature args
[ 11.889394] .(1)[1:init]device-mapper: ioctl: error adding target to table
[ 11.890310] .(1)[1:init]init: [libfs_mgr]Error loading verity table: Invalid argument
[ 11.891322] .(1)[1:init]init: [libfs_mgr]Disabling error correction for vendor
[ 11.892290] .(1)[1:init]init: [libfs_mgr]loading verity table: '1 /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/vendor /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/vendor 4096 4096 72566 72566 sha256 0622a125b535cc75fe5fd6d08586095a27ec0c7bf03969ef7ff11b4ba6ea212c aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 2 ignore_zero_blocks restart_on_corruption'
[ 11.903161] .(1)[1:init]EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 11.904279] .(1)[1:init]init: [libfs_mgr]__mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0: Success
[ 11.951433] .(0)[1:init]init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[ 11.952583] .(0)[1:init]init: Loading SELinux policy
[ 11.971823] .(1)[1:init]SELinux: 2048 avtab hash slots, 33279 rules.
[ 11.991322] .(1)[1:init]SELinux: 2048 avtab hash slots, 33279 rules.
[ 11.991395] .(1)[1:init]SELinux: 1 users, 4 roles, 2434 types, 0 bools, 1 sens, 1024 cats
[ 11.991410] .(1)[1:init]SELinux: 93 classes, 33279 rules
[ 11.994933] .(1)[1:init]SELinux: Completing initialization.
[ 11.994945] .(1)[1:init]SELinux: Setting up existing superblocks.
[ 11.994972] .(1)[1:init]SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 11.994996] .(1)[1:init]SELinux: initialized (dev bdev, type bdev), not configured for labeling
[ 11.995033] .(1)[1:init]SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 11.995072] .(1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.995115] .(1)[1:init]SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 11.998244] .(1)[1:init]SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 11.998278] .(1)[1:init]SELinux: initialized (dev tracefs, type tracefs), uses genfs_contexts
[ 12.021411] .(0)[78:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:NO-CDEV
[ 12.025190] .(1)[1:init]SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 12.025206] .(1)[1:init]SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 12.025219] .(1)[1:init]SELinux: initialized (dev aio, type aio), not configured for labeling
[ 12.025234] .(1)[1:init]SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 12.025261] .(1)[1:init]SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 12.025281] .(1)[1:init]SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 12.025356] .(1)[1:init]SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 12.025514] .(1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.025602] .(1)[1:init]SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 12.048316] .(1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.048767] .(1)[1:init]SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 12.071401] .(0)[261:bat_thread_kthr]step B2 : Charging Host!\x0d
[ 12.072227] .(0)[261:bat_thread_kthr][MUSB]Charger_Detect_Release 717: Charger_Detect_Release
[ 12.073318] .(0)[261:bat_thread_kthr][MUSB]mt_usb_connect 547: issue work
[ 12.074225] .(0)[261:bat_thread_kthr][MUSB]mt_usb_connect 549: [MUSB] USB connect
[ 12.075209] .(0)[204:kworker/u16:4][MUSB]do_connection_work 475: is ready 0 is_host 0 power 0
[ 12.076301] .(0)[204:kworker/u16:4][MUSB]do_connection_work 489: issue work after 50 ms
[ 12.076829] .(1)[1:init]audit: type=1403 audit(1262304100.420:2): policy loaded auid=4294967295 ses=4294967295
[ 12.077055] .(1)[1:init]selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy\x0a
[ 12.077459] .(1)[1:init]audit: type=1404 audit(1262304100.420:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 12.108616] .(0)[1:init]selinux: SELinux: Loaded file_contexts\x0a
[ 12.111072] .(0)[1:init]random: init urandom read with 26 bits of entropy available
[ 12.114631] .(1)[1:init]init: init second stage started!
[ 12.131405] .(0)[204:kworker/u16:4][MUSB]do_connection_work 475: is ready 0 is_host 0 power 0
[ 12.149515] .(1)[1:init]init: Using Android DT directory /proc/device-tree/firmware/android/
[ 12.151786] .(1)[1:init]init: Init cannot set 'ro.boot.hardware' to 'mt6735': Read-only property was already set
[ 12.153270] .(1)[1:init]init: Init cannot set 'ro.boot.serialno' to '0123456789ABCDEF': Read-only property was already set
[ 12.159945] .(1)[1:init]selinux: SELinux: Loaded file_contexts\x0a
[ 12.160950] .(1)[1:init]init: Running restorecon...
[ 12.176647] .(0)[261:bat_thread_kthr]AvgVbat=(4376,4376),AvgI=(640,352),VChr=4938,AvgT=(18,18),SOC=(100,100),UI_SOC=100,ZCV=4376,CHR_Type=2 bcct:0:0 I:45000 Ibat:0 fg:0
[ 12.177789] .(1)[1:init]init: waitid failed: No child processes
[ 12.179235] .(1)[1:init]init: PropSet [security.perf_harden]=[1] Done
[ 12.179291] .(1)[1:init]init: PropSet [tombstoned.max_tombstone_count]=[50] Done
[ 12.179386] .(1)[1:init]init: PropSet [dalvik.vm.image-dex2oat-Xms]=[64m] Done
[ 12.179415] .(1)[1:init]init: PropSet [dalvik.vm.image-dex2oat-Xmx]=[64m] Done
[ 12.179440] .(1)[1:init]init: PropSet [dalvik.vm.dex2oat-Xms]=[64m] Done
[ 12.179465] .(1)[1:init]init: PropSet [dalvik.vm.dex2oat-Xmx]=[512m] Done
[ 12.179523] .(1)[1:init]init: PropSet [dalvik.vm.usejit]=[true] Done
[ 12.179548] .(1)[1:init]init: PropSet [dalvik.vm.usejitprofiles]=[true] Done
[ 12.179574] .(1)[1:init]init: PropSet [dalvik.vm.dexopt.secondary]=[true] Done
[ 12.179599] .(1)[1:init]init: PropSet [dalvik.vm.appimageformat]=[lz4] Done
[ 12.179673] .(1)[1:init]init: PropSet [pm.dexopt.first-boot]=[quicken] Done
[ 12.179699] .(1)[1:init]init: PropSet [pm.dexopt.boot]=[verify] Done
[ 12.179724] .(1)[1:init]init: PropSet [pm.dexopt.install]=[speed-profile] Done
[ 12.179749] .(1)[1:init]init: PropSet [pm.dexopt.bg-dexopt]=[speed-profile] Done
[ 12.179773] .(1)[1:init]init: PropSet [pm.dexopt.ab-ota]=[speed-profile] Done
[ 12.179797] .(1)[1:init]init: PropSet [pm.dexopt.inactive]=[verify] Done
[ 12.179821] .(1)[1:init]init: PropSet [pm.dexopt.shared]=[speed] Done
[ 12.179850] .(1)[1:init]init: PropSet [dalvik.vm.dex2oat-minidebuginfo]=[true] Done
[ 12.179933] .(1)[1:init]init: PropSet [debug.atrace.tags.enableflags]=[0] Done
[ 12.180120] .(1)[1:init]init: PropSet [persist.vendor.vzw_device_type]=[0] Done
[ 12.180290] .(1)[1:init]init: PropSet [persist.sys.usb.config]=[adb] Done
[ 12.186106] .(1)[1:init]init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[ 12.189818] .(1)[1:init]init: PropSet [log.tag.stats_log]=[I] Done
[ 12.189898] .(1)[1:init]init: PropSet [persist.service.acm.enable]=[0] Done
[ 12.190049] .(1)[1:init]init: PropSet [camera.disable_zsl_mode]=[1] Done
[ 12.190596] .(1)[1:init]init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[ 12.190668] .(1)[1:init]init: PropSet [sys.usb.controller]=[musb-hdrc.0.auto] Done
[ 12.191573] .(1)[1:init]init: Forked subcontext for 'u:r:vendor_init:s0' with pid 285
[ 12.192414] .(1)[1:init]init: Forked subcontext for 'u:r:vendor_init:s0' with pid 286
[ 12.192616] .(1)[1:init]init: Parsing file /init.rc...
[ 12.193875] .(1)[1:init]init: Added '/init.environ.rc' to import list
[ 12.193893] .(1)[1:init]init: Added '/init.usb.rc' to import list
[ 12.193917] .(1)[1:init]init: Added '/init.mt6735.rc' to import list
[ 12.193945] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.mt6735.rc' to import list
[ 12.193958] .(1)[1:init]init: Added '/init.usb.configfs.rc' to import list
[ 12.193982] .(1)[1:init]init: Added '/init.zygote64_32.rc' to import list
[ 12.196281] .(1)[1:init]init: Parsing file /init.environ.rc...
[ 12.196959] .(1)[1:init]init: Parsing file /init.usb.rc...
[ 12.197842] .(1)[1:init]init: Parsing file /init.mt6735.rc...
[ 12.197871] .(1)[1:init]init: Unable to read config file '/init.mt6735.rc': open() failed: No such file or directory
[ 12.197893] .(1)[1:init]init: /init.rc: 9: Could not import file '/init.mt6735.rc': No such file or directory
[ 12.199482] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.mt6735.rc...
[ 12.200543] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.connectivity.rc' to import list
[ 12.200568] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.mt6735.usb.rc' to import list
[ 12.200583] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.project.rc' to import list
[ 12.200597] .(1)[1:init]init: Added '/FWUpgradeInit.rc' to import list
[ 12.200611] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.aee.rc' to import list
[ 12.200626] .(1)[1:init]init: Added '/system/etc/init/hw/init.aee.rc' to import list
[ 12.200644] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.volte.rc' to import list
[ 12.200662] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.mal.rc' to import list
[ 12.200681] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.sensor_1_0.rc' to import list
[ 12.200734] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.c2k.rc' to import list
[ 12.200753] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.ago.rc' to import list
[ 12.200772] .(1)[1:init]init: Added '/vendor/etc/init/hw/init.modem.rc' to import list
[ 12.201225] .(1)[1:init]init: /vendor/etc/init/hw/init.mt6735.rc: 272: Invalid keyword 'mknod'
[ 12.211074] .(1)[1:init]init: /vendor/etc/init/hw/init.mt6735.rc: 388: Invalid keyword 'mknod'
[ 12.211104] .(1)[1:init]init: /vendor/etc/init/hw/init.mt6735.rc: 395: Invalid keyword 'mknod'
[ 12.211901] .(1)[1:init]init: /vendor/etc/init/hw/init.mt6735.rc: 745: Invalid keyword 'f##Add'
[ 12.219694] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.connectivity.rc...
[ 12.221559] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.mt6735.usb.rc...
[ 12.226327] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.project.rc...
[ 12.226839] .(1)[1:init]init: Parsing file /FWUpgradeInit.rc...
[ 12.226867] .(1)[1:init]init: Unable to read config file '/FWUpgradeInit.rc': open() failed: No such file or directory
[ 12.226887] .(1)[1:init]init: /init.rc: 6: Could not import file '/FWUpgradeInit.rc': No such file or directory
[ 12.227180] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.aee.rc...
[ 12.228180] .(1)[1:init]init: Parsing file /system/etc/init/hw/init.aee.rc...
[ 12.228584] .(1)[1:init]init: Added '/init.preload.rc' to import list
[ 12.228614] .(1)[1:init]init: Parsing file /init.preload.rc...
[ 12.228640] .(1)[1:init]init: Unable to read config file '/init.preload.rc': open() failed: No such file or directory
[ 12.228658] .(1)[1:init]init: /init.rc: 32: Could not import file '/init.preload.rc': No such file or directory
[ 12.228685] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.volte.rc...
[ 12.228709] .(1)[1:init]init: Unable to read config file '/vendor/etc/init/hw/init.volte.rc': open() failed: No such file or directory
[ 12.228725] .(1)[1:init]init: /init.rc: 9: Could not import file '/vendor/etc/init/hw/init.volte.rc': No such file or directory
[ 12.228746] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.mal.rc...
[ 12.228769] .(1)[1:init]init: Unable to read config file '/vendor/etc/init/hw/init.mal.rc': open() failed: No such file or directory
[ 12.228785] .(1)[1:init]init: /init.rc: 10: Could not import file '/vendor/etc/init/hw/init.mal.rc': No such file or directory
[ 12.229103] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.sensor_1_0.rc...
[ 12.230398] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.c2k.rc...
[ 12.231095] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.ago.rc...
[ 12.231720] .(1)[1:init]init: Parsing file /vendor/etc/init/hw/init.modem.rc...
[ 12.232117] .(1)[1:init]init: Parsing file /init.usb.configfs.rc...
[ 12.233178] .(1)[1:init]init: Parsing file /init.zygote64_32.rc...
[ 12.233701] .(1)[1:init]init: Parsing directory /system/etc/init...
[ 12.233965] .(1)[1:init]init: Parsing file /system/etc/init/aal.rc...
[ 12.234343] .(1)[1:init]init: Parsing file /system/etc/init/aee_aed.rc...
[ 12.234696] .(1)[1:init]init: Parsing file /system/etc/init/aee_aed64.rc...
[ 12.235030] .(1)[1:init]init: Parsing file /system/etc/init/[email protected]...
[ 12.235365] .(1)[1:init]init: Parsing file /system/etc/init/atci_service.rc...
[ 12.235756] .(1)[1:init]init: Parsing file /system/etc/init/atrace.rc...
[ 12.236538] .(1)[1:init]init: Parsing file /system/etc/init/atrace_userdebug.rc...
[ 12.236907] .(1)[1:init]init: Parsing file /system/etc/init/audioserver.rc...
[ 12.237304] .(1)[1:init]init: Parsing file /system/etc/init/batterywarning.rc...
[ 12.237624] .(1)[1:init]init: Parsing file /system/etc/init/blank_screen.rc...
[ 12.237939] .(1)[1:init]init: Parsing file /system/etc/init/bootanim.rc...
[ 12.238262] .(1)[1:init]init: Parsing file /system/etc/init/bootlogoupdater.rc...
[ 12.238593] .(1)[1:init]init: Parsing file /system/etc/init/bootstat-debug.rc...
[ 12.239011] .(1)[1:init]init: Parsing file /system/etc/init/bootstat.rc...
[ 12.239530] .(1)[1:init]init: Parsing file /system/etc/init/cameraserver.rc...
[ 12.239880] .(1)[1:init]init: Parsing file /system/etc/init/cmddumper.rc...
[ 12.240227] .(1)[1:init]init: Parsing file /system/etc/init/drmserver.rc...
[ 12.240550] .(1)[1:init]init: Parsing file /system/etc/init/dumpstate.rc...
[ 12.240925] .(1)[1:init]init: Parsing file /system/etc/init/em_svr.rc...
[ 12.241287] .(1)[1:init]init: Parsing file /system/etc/init/emdlogger1.rc...
[ 12.241794] .(1)[1:init]init: Parsing file /system/etc/init/emdlogger2.rc...
[ 12.242149] .(1)[1:init]init: Parsing file /system/etc/init/emdlogger3.rc...
[ 12.242486] .(1)[1:init]init: Parsing file /system/etc/init/emdlogger5.rc...
[ 12.242834] .(1)[1:init]init: Parsing file /system/etc/init/gatekeeperd.rc...
[ 12.243158] .(1)[1:init]init: Parsing file /system/etc/init/ged_srv.rc...
[ 12.243547] .(1)[1:init]init: Parsing file /system/etc/init/hwservicemanager.rc...
[ 12.243911] .(1)[1:init]init: Parsing file /system/etc/init/incidentd.rc...
[ 12.244289] .(1)[1:init]init: Parsing file /system/etc/init/init-debug.rc...
[ 12.244644] .(1)[1:init]init: Parsing file /system/etc/init/init.thermald.rc...
[ 12.244973] .(1)[1:init]init: Parsing file /system/etc/init/init.vtservice.rc...
[ 12.245388] .(1)[1:init]init: Parsing file /system/etc/init/init_connectivity.rc...
[ 12.245821] .(1)[1:init]init: Parsing file /system/etc/init/installd.rc...
[ 12.246476] .(1)[1:init]init: Parsing file /system/etc/init/keystore.rc...
[ 12.246822] .(1)[1:init]init: Parsing file /system/etc/init/kpoc_charger.rc...
[ 12.247132] .(1)[1:init]init: Parsing file /system/etc/init/lmkd.rc...
[ 12.247452] .(1)[1:init]init: Parsing file /system/etc/init/logcatd.rc...
[ 12.247955] .(1)[1:init]init: Parsing file /system/etc/init/logd.rc...
[ 12.248389] .(1)[1:init]init: Parsing file /system/etc/init/logtagd.rc...
[ 12.248720] .(1)[1:init]init: Parsing file /system/etc/init/md_monitor.rc...
[ 12.249064] .(1)[1:init]init: Parsing file /system/etc/init/mdlogger.rc...
[ 12.249451] .(1)[1:init]init: Parsing file /system/etc/init/mdnsd.rc...
[ 12.249782] .(1)[1:init]init: Parsing file /system/etc/init/mediadrmserver.rc...
[ 12.250113] .(1)[1:init]init: Parsing file /system/etc/init/mediaextractor.rc...
[ 12.250438] .(1)[1:init]init: Parsing file /system/etc/init/mediametrics.rc...
[ 12.250756] .(1)[1:init]init: Parsing file /system/etc/init/mediaserver.rc...
[ 12.251110] .(1)[1:init]init: Parsing file /system/etc/init/mobile_log_d.rc...
[ 12.251590] .(1)[1:init]init: Parsing file /system/etc/init/mtpd.rc...
[ 12.251967] .(1)[1:init]init: Parsing file /system/etc/init/netd.rc...
[ 12.252337] .(1)[1:init]init: Parsing file /system/etc/init/netdiag.rc...
[ 12.252710] .(1)[1:init]init: Parsing file /system/etc/init/perfetto.rc...
[ 12.253195] .(1)[1:init]init: Parsing file /system/etc/init/perfprofd.rc...
[ 12.253552] .(1)[1:init]init: Parsing file /system/etc/init/racoon.rc...
[ 12.253888] .(1)[1:init]init: Parsing file /system/etc/init/servicemanager.rc...
[ 12.254270] .(1)[1:init]init: Parsing file /system/etc/init/sn.rc...
[ 12.254648] .(1)[1:init]init: Parsing file /system/etc/init/statsd.rc...
[ 12.255039] .(1)[1:init]init: Parsing file /system/etc/init/storaged.rc...
[ 12.255387] .(1)[1:init]init: Parsing file /system/etc/init/storagemanagerd.rc...
[ 12.255777] .(1)[1:init]init: Parsing file /system/etc/init/surfaceflinger.rc...
[ 12.256156] .(1)[1:init]init: Parsing file /system/etc/init/terserver.rc...
[ 12.256488] .(1)[1:init]init: Parsing file /system/etc/init/thermalservice.rc...
[ 12.256860] .(1)[1:init]init: Parsing file /system/etc/init/tombstoned.rc...
[ 12.257225] .(1)[1:init]init: Parsing file /system/etc/init/uncrypt.rc...
[ 12.257582] .(1)[1:init]init: Parsing file /system/etc/init/usbd.rc...
[ 12.257930] .(1)[1:init]init: Parsing file /system/etc/init/vdc.rc...
[ 12.258287] .(1)[1:init]init: Parsing file /system/etc/init/vold.rc...
[ 12.258615] .(1)[1:init]init: Parsing file /system/etc/init/wait_for_keymaster.rc...
[ 12.258945] .(1)[1:init]init: Parsing file /system/etc/init/wifi-events.rc...
[ 12.259432] .(1)[1:init]init: Parsing file /system/etc/init/wificond.rc...
[ 12.259871] .(1)[1:init]init: Parsing file /product/etc/init...
[ 12.259902] .(1)[1:init]init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
[ 12.259979] .(1)[1:init]init: Parsing file /odm/etc/init...
[ 12.260007] .(1)[1:init]init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
[ 12.260027] .(1)[1:init]init: Parsing directory /vendor/etc/init...
[ 12.260314] .(1)[1:init]init: Parsing file /vendor/etc/init/aee_aedv.rc...
[ 12.261066] .(1)[1:init]init: Parsing file /vendor/etc/init/aee_aedv64.rc...
[ 12.261730] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.262749] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.263462] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.264047] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.264599] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.265163] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.265743] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.266361] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.266915] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.267464] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.268048] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.268614] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.269176] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.269753] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.270363] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.270915] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.271496] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.272098] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.272737] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.273299] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.273865] .(1)[1:init]init: Parsing file /vendor/etc/init/atcid.rc...
[ 12.274888] .(1)[1:init]init: Parsing file /vendor/etc/init/audiocmdservice_atci.rc...
[ 12.275566] .(1)[1:init]init: Parsing file /vendor/etc/init/bootperf.rc...
[ 12.276143] .(1)[1:init]init: Parsing file /vendor/etc/init/camerahalserver.rc...
[ 12.276740] .(1)[1:init]init: Parsing file /vendor/etc/init/em_hidl_user.rc...
[ 12.277684] .(1)[1:init]init: Parsing file /vendor/etc/init/fuelgauged_init.rc...
[ 12.278317] .(1)[1:init]init: Parsing file /vendor/etc/init/gsm0710muxd.rc...
[ 12.278881] .(1)[1:init]init: Parsing file /vendor/etc/init/hostapd.android.rc...
[ 12.279785] .(1)[1:init]init: Parsing file /vendor/etc/init/init.bt_drv.rc...
[ 12.280402] .(1)[1:init]init: Parsing file /vendor/etc/init/init.cccifsd.rc...
[ 12.281010] .(1)[1:init]init: Parsing file /vendor/etc/init/init.cccimdinit.rc...
[ 12.281718] .(1)[1:init]init: Parsing file /vendor/etc/init/init.cccirpcd.rc...
[ 12.282305] .(1)[1:init]init: Parsing file /vendor/etc/init/init.fmradio_drv.rc...
[ 12.282881] .(1)[1:init]init: Parsing file /vendor/etc/init/init.gps_drv.rc...
[ 12.283424] .(1)[1:init]init: Parsing file /vendor/etc/init/init.mal.rc...
[ 12.284053] .(1)[1:init]init: Parsing file /vendor/etc/init/init.md_apps.rc...
[ 12.284637] .(1)[1:init]init: Parsing file /vendor/etc/init/init.thermal.rc...
[ 12.285195] .(1)[1:init]init: Parsing file /vendor/etc/init/init.thermal_manager.rc...
[ 12.285777] .(1)[1:init]init: Parsing file /vendor/etc/init/init.viarild.rc...
[ 12.286421] .(1)[1:init]init: Parsing file /vendor/etc/init/init.volte_imcb.rc...
[ 12.287028] .(1)[1:init]init: Parsing file /vendor/etc/init/init.volte_stack.rc...
[ 12.287633] .(1)[1:init]init: Parsing file /vendor/etc/init/init.volte_ua.rc...
[ 12.288219] .(1)[1:init]init: Parsing file /vendor/etc/init/init.vtservice.rc...
[ 12.288786] .(1)[1:init]init: /vendor/etc/init/init.vtservice.rc: 3: ignored duplicate definition of service 'vtservice'
[ 12.288860] .(1)[1:init]init: /vendor/etc/init/init.vtservice.rc: 9: ignored duplicate definition of service 'vtservice_hidl'
[ 12.288874] .(1)[1:init]init: Parsing file /vendor/etc/init/init.wfca.rc...
[ 12.289486] .(1)[1:init]init: Parsing file /vendor/etc/init/init.wlan_drv.rc...
[ 12.290053] .(1)[1:init]init: Parsing file /vendor/etc/init/init.wmt_drv.rc...
[ 12.290609] .(1)[1:init]init: Parsing file /vendor/etc/init/init.wod.rc...
[ 12.291218] .(1)[1:init]init: Parsing file /vendor/etc/init/init_connectivity.rc...
[ 12.291835] .(1)[1:init]init: /vendor/etc/init/init_connectivity.rc: 6: ignored duplicate definition of service 'wmt_loader'
[ 12.291881] .(1)[1:init]init: /vendor/etc/init/init_connectivity.rc: 12: ignored duplicate definition of service 'wmt_launcher'
[ 12.291977] .(1)[1:init]init: /vendor/etc/init/init_connectivity.rc: 32: ignored duplicate definition of service 'vendor.stp_dump'
[ 12.291990] .(1)[1:init]init: Parsing file /vendor/etc/init/ipsec_mon.rc...
[ 12.292627] .(1)[1:init]init: Parsing file /vendor/etc/init/lbs_hidl_service.rc...
[ 12.293235] .(1)[1:init]init: Parsing file /vendor/etc/init/loghidlvendorservice.rc...
[ 12.294308] .(1)[1:init]init: Parsing file /vendor/etc/init/mtk_agpsd.rc...
[ 12.295006] .(1)[1:init]init: Parsing file /vendor/etc/init/mtk_agpsd_p.rc...
[ 12.295619] .(1)[1:init]init: Parsing file /vendor/etc/init/muxreport.rc...
[ 12.296206] .(1)[1:init]init: Parsing file /vendor/etc/init/netdagent.rc...
[ 12.296769] .(1)[1:init]init: Parsing file /vendor/etc/init/nvram_daemon.rc...
[ 12.297358] .(1)[1:init]init: Parsing file /vendor/etc/init/ppl_agent.rc...
[ 12.297927] .(1)[1:init]init: Parsing file /vendor/etc/init/rild.rc...
[ 12.298649] .(1)[1:init]init: Parsing file /vendor/etc/init/rilproxy.rc...
[ 12.299371] .(1)[1:init]init: Parsing file /vendor/etc/init/spm_script.rc...
[ 12.299941] .(1)[1:init]init: Parsing file /vendor/etc/init/statusd.rc...
[ 12.300591] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.301197] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.301784] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.302725] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.303366] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.303974] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.305048] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.305639] .(1)[1:init]init: Added '[email protected]' to import list
[ 12.305736] .(1)[1:init]init: Parsing file [email protected]...
[ 12.305764] .(1)[1:init]init: Unable to read config file '[email protected]': open() failed: No such file or directory
[ 12.305804] .(1)[1:init]init: /init.rc: 1: Could not import file '[email protected]': No such file or directory
[ 12.305818] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.306405] .(1)[1:init]init: Parsing file /vendor/etc/init/[email protected]...
[ 12.306964] .(1)[1:init]init: Parsing file /vendor/etc/init/vndservicemanager.rc...
[ 12.307534] .(1)[1:init]init: Parsing file /vendor/etc/init/wlan_assistant.rc...
[ 12.308267] .(1)[1:init]init: processing action (early-init) from (/init.rc:14)
[ 12.310413] .(1)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 12.312528] -(2)[0:swapper/2]Detected VIPT I-cache on CPU2
[ 12.313305] -(3)[0:swapper/3]Detected VIPT I-cache on CPU3
[ 12.313861] .(1)[117:hps_main][HPS] (0020)(2)action end(200)(322)(0)(1) (8)(8)(8)(8)(1) (211)(5)(1) (498)(5)(5) (1)(322)(6)(0)(322)
[ 12.314500] .(2)[1:init]init: starting service 'ueventd'...
[ 12.316560] .(1)[1:init]init: processing action (early-init) from (/vendor/etc/init/hw/init.mt6735.rc:20)
[ 12.319231] .(2)[287:ueventd]ueventd: ueventd started!
[ 12.320705] .(3)[285:init]BOOTPROF: 12320.695259:INIT:early-init
[ 12.324861] .(2)[287:ueventd]selinux: SELinux: Loaded file_contexts\x0a
[ 12.325019] .(2)[287:ueventd]ueventd: Parsing file /ueventd.rc...
[ 12.326208] .(2)[285:init][VcoreFS] vcore_debug: cmd = KIR_PERF, val = 1 (0x1)
[ 12.326684] .(2)[287:ueventd]ueventd: Parsing file /vendor/ueventd.rc...
[ 12.326952] .(1)[1:init]init: processing action (early-init) from (/vendor/etc/init/hw/init.mt6735.usb.rc:1)
[ 12.327741] .(1)[287:ueventd]ueventd: Parsing file /odm/ueventd.rc...
[ 12.327770] .(2)[1:init]init: processing action (early-init) from (/vendor/etc/init/hw/init.modem.rc:7)
[ 12.327774] .(1)[287:ueventd]ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 12.327896] .(1)[287:ueventd]ueventd: Parsing file /ueventd.mt6735.rc...
[ 12.327919] .(1)[287:ueventd]ueventd: Unable to read config file '/ueventd.mt6735.rc': open() failed: No such file or directory
[ 12.332179] .(3)[1:init]init: PropSet [net.perf.tether.rps]=[0f] Done
[ 12.332291] .(3)[1:init]init: PropSet [net.perf.rps.default]=[ff] Done
[ 12.332404] .(3)[1:init]init: PropSet [net.perf.tether.cpu.core]=[4,4,0,0] Done
[ 12.332506] .(3)[1:init]init: PropSet [net.perf.tether.cpu.freq]=[1144000,1144000,0,0] Done
[ 12.332608] .(3)[1:init]init: PropSet [net.perf.internal.cpu.core]=[2,2,0,0] Done
[ 12.332708] .(3)[1:init]init: PropSet [net.perf.internal.cpu.freq]=[819000,819000,-1,-1] Done
[ 12.332762] .(3)[1:init]init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
[ 12.380122] .(1)[204:kworker/u16:4][HXTP] himax_cable_detect_func: Cable status change: 0x01
[ 12.393064] .(1)[287:ueventd]musb-hdrc musb-hdrc.0.auto: prop=1, power=0, is_host=0
[ 12.393074] .(1)[287:ueventd]musb-hdrc musb-hdrc.0.auto: prop=2, power=0, is_host=0
[ 12.393081] .(1)[287:ueventd]musb-hdrc musb-hdrc.0.auto: prop=3, power=0, is_host=0
[ 12.427990] .(1)[290:ueventd]#@# fsnotify(204) mask 0x100, file_name spm
[ 12.427994] .(1)[290:ueventd]------------[ cut here ]------------
[ 12.428009] .(1)[290:ueventd]WARNING: CPU: 1 PID: 290 at /usr/src/p0/kernel-3.18/fs/notify/fsnotify.c:205 fsnotify+0x384/0x3ac()
[ 12.428014] .(1)[290:ueventd]Modules linked in:
[ 12.428022] -(1)[290:ueventd]CPU: 1 PID: 290 Comm: ueventd Tainted: G W 3.18.119 #1
[ 12.428025] -(1)[290:ueventd]Hardware name: MT6753 (DT)
[ 12.428030] -(1)[290:ueventd]Call trace:
[ 12.428038] -(1)[290:ueventd][<ffffffc00008bb44>] dump_backtrace+0x0/0x1d0
[ 12.428045] -(1)[290:ueventd][<ffffffc00008bd28>] show_stack+0x14/0x1c
[ 12.428050] -(1)[290:ueventd][<ffffffc000a9c650>] dump_stack+0x90/0xb8
[ 12.428057] -(1)[290:ueventd][<ffffffc0000a28e4>] warn_slowpath_null+0x6c/0xb4
[ 12.428063] -(1)[290:ueventd][<ffffffc000205120>] fsnotify+0x384/0x3ac
[ 12.428069] -(1)[290:ueventd][<ffffffc0001cde64>] vfs_mknod2.part.30+0xb4/0xf4
[ 12.428073] -(1)[290:ueventd][<ffffffc0001cdf54>] vfs_mknod2+0xb0/0xc0
[ 12.428079] -(1)[290:ueventd][<ffffffc0001d36f8>] SyS_mknodat+0x1d8/0x224
[ 12.428083] .(1)[290:ueventd]---[ end trace 5d0550754f78e698 ]---
[ 12.471179] .(0)[261:bat_thread_kthr][BATTERY] Pre-CC mode charge, timer=0 on 0 !!\x0a\x0d
[ 12.471926] .(0)[261:bat_thread_kthr][BATTERY] Default CC mode charging : 65000\x0d
[ 12.481485] .(0)[78:kworker/0:1]get expdb info
[ 12.481620] .(2)[204:kworker/u16:4][HXTP] [HIMAX TP MSG]: ESD event checked - ALL 0xED.
[ 12.481623] .(2)[204:kworker/u16:4][HXTP] START_Himax TP: ESD - Reset
[ 12.541439] .(2)[204:kworker/u16:4][HXTP] himax_loadSensorConfig: TOUCH DEBUG 1
[ 12.542656] .(0)[204:kworker/u16:4][HXTP] himax_power_on_initCMD:
[ 12.610407] .(0)[287:ueventd]ueventd: Coldboot took 0.28 seconds
[ 12.616522] .(0)[1:init]init: wait for '/dev/.coldboot_done' took 283ms
[ 12.617481] .(0)[1:init]init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 284ms and succeeded
[ 12.619129] .(0)[1:init]init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
[ 12.620308] .(0)[1:init]init: /dev/hw_random not found
[ 12.621017] .(0)[1:init]init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
[ 12.622739] .(0)[1:init]init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
[ 12.623991] .(0)[1:init]init: processing action (keychord_init) from (<Builtin Action>:0)
[ 12.625089] .(0)[1:init]init: could not open /dev/keychord: No such file or directory
[ 12.626126] .(0)[1:init]init: processing action (console_init) from (<Builtin Action>:0)
[ 12.627225] .(0)[1:init]init: processing action (init) from (/init.rc:41)
[ 12.628704] .(0)[1:init]init: Command 'copy /default.prop /dev/urandom' action=init (/init.rc:46) took 0ms and failed: Could not read input file '/default.prop': open() failed: Too many symbolic links encountered
[ 12.647944] .(3)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 12.650887] .(3)[1:init]init: Command 'mount cpuset none /dev/cpuset nodev noexec nosuid' action=init (/init.rc:161) took 0ms and failed: mount() failed: No such device
[ 12.658866] .(2)[1:init]init: Command 'mount cgroup2 cg2_bpf /dev/cg2_bpf nodev noexec nosuid' action=init (/init.rc:225) took 0ms and failed: mount() failed: No such device
[ 12.662294] .(2)[1:init]pstore: decompression failed;returned -5
[ 12.663341] .(2)[1:init]pstore: decompression failed;returned -5
[ 12.664648] .(2)[1:init]SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 12.665481] .(2)[1:init]Registered swp emulation handler
[ 12.668033] .(2)[1:init]init: processing action (init) from (/init.environ.rc:2)
[ 12.669088] .(2)[1:init]init: processing action (init) from (/vendor/etc/init/hw/init.mt6735.rc:32)
[ 12.680517] .(2)[1:init]init: processing action (init) from (/vendor/etc/init/hw/init.project.rc:4)
[ 12.683226] .(2)[1:init]init: Command 'mkdir /storage/usbotg 0700 root root' action=init (/vendor/etc/init/hw/init.project.rc:6) took 0ms and failed: mkdir() failed: Read-only file system
[ 12.685404] .(2)[1:init]init: processing action (init) from (/system/etc/init/hw/init.aee.rc:25)
[ 12.687032] .(2)[1:init]init: processing action (init) from (/vendor/etc/init/hw/init.ago.rc:3)
[ 12.688902] .(2)[1:init]init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
[ 12.690056] .(2)[1:init]init: /dev/hw_random not found
[ 12.690777] .(2)[1:init]init: processing action (late-init) from (/init.rc:278)
[ 12.691875] .(2)[1:init]init: processing action (late-init) from (/vendor/etc/init/hw/init.mt6735.rc:56)
[ 12.693538] .(3)[285:init]BOOTPROF: 12693.532644:INIT:late-init
[ 12.694417] .(2)[1:init]init: processing action (late-init) from (/system/etc/init/atrace.rc:3)
[ 12.699368] .(2)[1:init][name:trace&][ftrace]tracing_on is toggled to 0
[ 12.699751] .(2)[1:init]init: Command 'write /sys/kernel/tracing/tracing_on 0' action=late-init (/system/etc/init/atrace.rc:122) took 0ms and failed: Unable to write to file '/sys/kernel/tracing/tracing_on': open() failed: Permission denied
[ 12.702590] .(2)[1:init]init: processing action (queue_property_triggers) from (<Builtin Action>:0)
[ 12.703834] .(2)[1:init]init: processing action (fs) from (/vendor/etc/init/hw/init.mt6735.rc:87)
[ 12.705494] .(3)[285:init]BOOTPROF: 12705.486644:INIT:Mount_START
[ 12.707021] .(2)[1:init]init: Command 'write /sys/kernel/debug/tracing/trace_marker B|1|Mount' action=fs (/vendor/etc/init/hw/init.mt6735.rc:89) took 0ms and failed: Unable to write to file '/sys/kernel/debug/tracing/trace_marker': Unable to write file contents: Bad file descriptor
[ 12.712317] .(2)[296:init]init: [libfs_mgr]Invalid ext4 superblock on '/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata'
[ 12.713936] .(2)[296:init]init: [libfs_mgr]mount_with_alternatives(): skipping mount, invalid ext4, mountpoint=/data rec[2].fs_type=ext4
[ 12.715979] .(2)[296:init]init: [libfs_mgr]fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata for mount /data type ext4
[ 12.718305] .(2)[296:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.718794] .(2)[296:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
[ 12.720378] .(2)[296:init]init: [libfs_mgr]Filesystem on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 12.723025] .(2)[296:init]EXT4-fs (mmcblk0p24): Ignoring removed nomblk_io_submit option
[ 12.728316] .(1)[296:init]EXT4-fs (mmcblk0p24): recovery complete
[ 12.729598] .(1)[296:init]EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 12.731122] .(1)[296:init]SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
[ 12.731300] .(1)[296:init]init: [libfs_mgr]check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,/cache,ext4)=0: Success
[ 12.761368] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:IC_TYPE =6
[ 12.761714] .(2)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 299000 KHz
[ 12.784124] .(3)[296:init]init: [libfs_mgr]check_fs(): unmount(/cache) succeeded
[ 12.788834] .(3)[296:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
[ 12.922033] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:Touch Panel Type=0
[ 12.941747] .(2)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 12.986535] .(3)[296:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
[ 12.987531] .(3)[296:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
[ 12.988659] .(3)[296:init]e2fsck: Pass 2: Checking directory structure\x0a
[ 12.989722] .(3)[296:init]e2fsck: Pass 3: Checking directory connectivity\x0a
[ 12.990817] .(3)[296:init]e2fsck: Pass 4: Checking reference counts\x0a
[ 12.991865] .(3)[296:init]e2fsck: Pass 5: Checking group summary information\x0a
[ 12.992994] .(3)[296:init]e2fsck: cache: 14/65536 files (0.0% non-contiguous), 6196/65536 blocks\x0a
[ 12.995949] .(3)[296:init]EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 12.997532] .(3)[296:init]SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
[ 12.997702] .(3)[296:init]init: [libfs_mgr]__mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,target=/cache,type=ext4)=0: Success
[ 13.000033] .(3)[296:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
[ 13.001659] .(0)[204:kworker/u16:4][HXTP] himax_touch_information:HX_RX_NUM =13,HX_TX_NUM =23,HX_MAX_PT=10
[ 13.001708] .(3)[296:init]init: [libfs_mgr]Filesystem on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1 was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 13.001781] .(3)[296:init]init: [libfs_mgr]check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,/mnt/vendor/protect_f,ext4)=-1: No such file or directory
[ 13.001805] .(3)[296:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
[ 13.008876] .(0)[204:kworker/u16:4][HXTP] config_ver=1.
[ 13.035694] .(0)[296:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
[ 13.036686] .(0)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1: recovering journal\x0a
[ 13.038249] .(0)[296:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
[ 13.039376] .(0)[296:init]e2fsck: Pass 2: Checking directory structure\x0a
[ 13.040439] .(0)[296:init]e2fsck: Pass 3: Checking directory connectivity\x0a
[ 13.041581] .(0)[296:init]e2fsck: Pass 4: Checking reference counts\x0a
[ 13.042613] .(0)[296:init]e2fsck: Pass 5: Checking group summary information\x0a
[ 13.043740] .(0)[296:init]e2fsck: Free blocks count wrong (1446, counted=1443).\x0a
[ 13.044900] .(0)[296:init]e2fsck: Fix? yes\x0a
[ 13.045659] .(0)[296:init]e2fsck: \x0a
[ 13.046339] .(0)[296:init]e2fsck: Free inodes count wrong (2549, counted=2548).\x0a
[ 13.047499] .(0)[296:init]e2fsck: Fix? yes\x0a
[ 13.048257] .(0)[296:init]e2fsck: \x0a
[ 13.048930] .(0)[296:init]e2fsck: \x0a
[ 13.049604] .(0)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1: ***** FILE SYSTEM WAS MODIFIED *****\x0a
[ 13.051494] .(0)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1: 12/2560 files (0.0% non-contiguous), 1117/2560 blocks\x0a
[ 13.053440] .(0)[296:init]e2fsck: e2fsck terminated by exit(1)\x0a
[ 13.054582] .(0)[296:init]init: [libfs_mgr]e2fsck returned status 0x100
[ 13.057181] .(1)[296:init]EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
[ 13.058881] .(1)[296:init]SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
[ 13.059082] .(1)[296:init]init: [libfs_mgr]__mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,target=/mnt/vendor/protect_f,type=ext4)=0: Success
[ 13.061652] .(1)[296:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
[ 13.063290] .(1)[296:init]init: [libfs_mgr]Filesystem on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2 was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 13.065519] .(1)[296:init]init: [libfs_mgr]check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,/mnt/vendor/protect_s,ext4)=-1: No such file or directory
[ 13.067585] .(1)[296:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
[ 13.091408] -(0)[162:kworker/u16:2]do_connection_work: 37 callbacks suppressed
[ 13.092348] .(0)[162:kworker/u16:2][MUSB]do_connection_work 475: is ready 0 is_host 0 power 0
[ 13.093439] .(0)[162:kworker/u16:2][MUSB]do_connection_work 489: issue work after 50 ms
[ 13.101388] .(2)[204:kworker/u16:4][HXTP] himax_loadSensorConfig: initialization complete
[ 13.102444] .(2)[204:kworker/u16:4][HXTP] END_Himax TP: ESD - Reset
[ 13.103127] .(1)[296:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
[ 13.103152] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2: recovering journal\x0a
[ 13.103159] .(1)[296:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
[ 13.103166] .(1)[296:init]e2fsck: Pass 2: Checking directory structure\x0a
[ 13.103174] .(1)[296:init]e2fsck: Pass 3: Checking directory connectivity\x0a
[ 13.103180] .(1)[296:init]e2fsck: Pass 4: Checking reference counts\x0a
[ 13.103187] .(1)[296:init]e2fsck: Pass 5: Checking group summary information\x0a
[ 13.103194] .(1)[296:init]e2fsck: Free blocks count wrong (1446, counted=1443).\x0a
[ 13.103200] .(1)[296:init]e2fsck: Fix? yes\x0a
[ 13.103207] .(1)[296:init]e2fsck: \x0a
[ 13.103213] .(1)[296:init]e2fsck: Free inodes count wrong (2549, counted=2548).\x0a
[ 13.103220] .(1)[296:init]e2fsck: Fix? yes\x0a
[ 13.103226] .(1)[296:init]e2fsck: \x0a
[ 13.103232] .(1)[296:init]e2fsck: \x0a
[ 13.103240] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2: ***** FILE SYSTEM WAS MODIFIED *****\x0a
[ 13.103248] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2: 12/2560 files (0.0% non-contiguous), 1117/2560 blocks\x0a
[ 13.103259] .(1)[296:init]e2fsck: e2fsck terminated by exit(1)\x0a
[ 13.103393] .(1)[296:init]init: [libfs_mgr]e2fsck returned status 0x100
[ 13.105110] .(1)[296:init]EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
[ 13.105268] .(1)[296:init]SELinux: initialized (dev mmcblk0p4, type ext4), uses xattr
[ 13.105465] .(1)[296:init]init: [libfs_mgr]__mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,target=/mnt/vendor/protect_s,type=ext4)=0: Success
[ 13.106048] .(1)[296:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
[ 13.106100] .(1)[296:init]init: [libfs_mgr]Filesystem on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 13.106168] .(1)[296:init]init: [libfs_mgr]check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,/mnt/vendor/nvdata,ext4)=-1: No such file or directory
[ 13.106192] .(1)[296:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
[ 13.136664] .(2)[204:kworker/u16:4][HXTP] [HIMAX TP MSG]:himax_ts_work: Back from reset, ready to serve.
[ 13.141402] .(0)[162:kworker/u16:2][MUSB]do_connection_work 475: is ready 0 is_host 0 power 0
[ 13.150500] .(1)[296:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
[ 13.151590] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata: recovering journal\x0a
[ 13.153132] .(1)[296:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
[ 13.154260] .(1)[296:init]e2fsck: Pass 2: Checking directory structure\x0a
[ 13.155323] .(1)[296:init]e2fsck: Pass 3: Checking directory connectivity\x0a
[ 13.156418] .(1)[296:init]e2fsck: Pass 4: Checking reference counts\x0a
[ 13.157448] .(1)[296:init]e2fsck: Pass 5: Checking group summary information\x0a
[ 13.158576] .(1)[296:init]e2fsck: Free blocks count wrong (6901, counted=6874).\x0a
[ 13.159737] .(1)[296:init]e2fsck: Fix? yes\x0a
[ 13.160496] .(1)[296:init]e2fsck: \x0a
[ 13.161169] .(1)[296:init]e2fsck: Free inodes count wrong (8181, counted=8154).\x0a
[ 13.162349] .(1)[296:init]e2fsck: Fix? yes\x0a
[ 13.163107] .(1)[296:init]e2fsck: \x0a
[ 13.163779] .(1)[296:init]e2fsck: \x0a
[ 13.164453] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata: ***** FILE SYSTEM WAS MODIFIED *****\x0a
[ 13.166190] .(1)[296:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata: 38/8192 files (0.0% non-contiguous), 1318/8192 blocks\x0a
[ 13.168112] .(1)[296:init]e2fsck: e2fsck terminated by exit(1)\x0a
[ 13.169241] .(1)[296:init]init: [libfs_mgr]e2fsck returned status 0x100
[ 13.171921] .(2)[296:init]EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 13.173530] .(2)[296:init]SELinux: initialized (dev mmcblk0p19, type ext4), uses xattr
[ 13.173789] .(2)[296:init]init: [libfs_mgr]__mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,target=/mnt/vendor/nvdata,type=ext4)=0: Success
[ 13.176876] .(0)[1:init]init: Parsing file /product/etc/init...
[ 13.177684] .(0)[1:init]init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
[ 13.179074] .(0)[1:init]init: Parsing file /odm/etc/init...
[ 13.179819] .(0)[1:init]init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
[ 13.181423] .(0)[1:init]init: Command 'mount_all /vendor/etc/fstab.mt6735' action=fs (/vendor/etc/init/hw/init.mt6735.rc:90) took 471ms and succeeded
[ 13.184408] .(0)[1:init]init: starting service 'exec 1 (/system/bin/tune2fs -O has_journal -u 10010 -r 4096 /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata)'...
[ 13.187436] .(0)[1:init]init: SVC_EXEC pid 313 (uid 0 gid 0+0 context default) started; waiting...
[ 13.207726] .(0)[1:init]init: Service 'exec 1 (/system/bin/tune2fs -O has_journal -u 10010 -r 4096 /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata)' (pid 313) exited with status 1 waiting took 0.020000 seconds
[ 13.211159] .(0)[1:init]init: Command 'write /sys/kernel/debug/tracing/trace_marker E' action=fs (/vendor/etc/init/hw/init.mt6735.rc:92) took 0ms and failed: Unable to write to file '/sys/kernel/debug/tracing/trace_marker': Unable to write file contents: Bad file descriptor
[ 13.214841] .(3)[285:init]BOOTPROF: 13214.831646:INIT:Mount_END
[ 13.216329] .(1)[1:init]init: processing action (fs) from (/vendor/etc/init/hw/init.mt6735.rc:96)
[ 13.217637] .(1)[1:init]init: processing action (fs) from (/vendor/etc/init/hw/init.mt6735.usb.rc:4)
[ 13.221186] .(1)[1:init]SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[ 13.221684] .(2)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 442000 KHz
[ 13.223252] .(1)[1:init]init: processing action (fs) from (/system/etc/init/logd.rc:18)
[ 13.225406] .(1)[1:init]init: processing action (fs) from (/system/etc/init/wifi-events.rc:17)
[ 13.226658] .(1)[1:init]init: PropSet [sys.wifitracing.started]=[0] Done
[ 13.227679] .(1)[1:init]init: processing action (post-fs) from (/init.rc:311)
[ 13.238593] .(1)[1:init]init: PropSet [vendor.rild.libpath]=[mtk-ril.so] Done
[ 13.239618] .(1)[1:init]init: PropSet [vendor.rild.libargs]=[-d /dev/ttyC0] Done
[ 13.240650] .(1)[1:init]init: PropSet [wifi.interface]=[wlan0] Done
[ 13.241730] .(1)[1:init]init: PropSet [mediatek.wlan.ctia]=[0] Done
[ 13.242626] .(1)[1:init]init: PropSet [wifi.tethering.interface]=[ap0] Done
[ 13.243639] .(1)[1:init]init: PropSet [wifi.direct.interface]=[p2p0] Done
[ 13.244636] .(1)[1:init]init: PropSet [sys.ipo.pwrdncap]=[2] Done
[ 13.245748] .(1)[1:init]init: PropSet [qemu.hw.mainkeys]=[0] Done
[ 13.246659] .(1)[1:init]init: PropSet [debug.hwui.render_dirty_regions]=[false] Done
[ 13.247769] .(1)[1:init]init: PropSet [sys.ipo.disable]=[1] Done
[ 13.248840] .(1)[1:init]init: PropSet [persist.sys.dalvik.vm.lib.2]=[libart.so] Done
[ 13.249922] .(1)[1:init]init: PropSet [dalvik.vm.isa.arm64.variant]=[cortex-a53] Done
[ 13.251010] .(1)[1:init]init: PropSet [dalvik.vm.isa.arm64.features]=[default] Done
[ 13.252111] .(1)[1:init]init: PropSet [dalvik.vm.isa.arm.variant]=[cortex-a53] Done
[ 13.253194] .(1)[1:init]init: PropSet [dalvik.vm.isa.arm.features]=[default] Done
[ 13.254239] .(1)[1:init]init: PropSet [dalvik.vm.lockprof.threshold]=[500] Done
[ 13.255258] .(1)[1:init]init: PropSet [net.bt.name]=[Android] Done
[ 13.256139] .(1)[1:init]init: PropSet [dalvik.vm.stack-trace-dir]=[/data/anr] Done
[ 13.257290] .(1)[1:init]init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such file or directory
[ 13.261698] .(3)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 598000 KHz
[ 13.261941] .(1)[1:init]init: Unable to set property 'ro.mediatek.platform' to 'MT6735' in property file '/vendor/build.prop': Read-only property was already set
[ 13.263976] .(1)[1:init]init: PropSet [persist.radio.default.sim]=[0] Done
[ 13.264920] .(1)[1:init]init: PropSet [bgw.current3gband]=[0] Done
[ 13.265945] .(1)[1:init]init: PropSet [curlockscreen]=[0] Done
[ 13.266761] .(1)[1:init]init: Unable to set property 'ro.opengles.version' to '196609' in property file '/vendor/build.prop': Read-only property was already set
[ 13.268770] .(1)[1:init]init: PropSet [persist.vendor.radio.fd.counter]=[150] Done
[ 13.269820] .(1)[1:init]init: PropSet [persist.vendor.radio.fd.off.counter]=[50] Done
[ 13.270898] .(1)[1:init]init: PropSet [persist.vendor.radio.fd.r8.counter]=[150] Done
[ 13.272023] .(1)[1:init]init: PropSet [persist.vendor.radio.fd.off.r8.counter]=[50] Done
[ 13.273118] .(1)[1:init]init: PropSet [drm.service.enabled]=[true] Done
[ 13.274025] .(1)[1:init]init: PropSet [fmradio.driver.enable]=[1] Done
[ 13.274928] .(1)[1:init]init: PropSet [dalvik.vm.mtk-stack-trace-file]=[/data/anr/mtk_traces.txt] Done
[ 13.276175] .(1)[1:init]init: PropSet [mediatek.wlan.chip]=[CONSYS_MT6735] Done
[ 13.277173] .(1)[1:init]init: PropSet [mediatek.wlan.module.postfix]=[_consys_mt6735] Done
[ 13.278287] .(1)[1:init]init: PropSet [ril.read.imsi]=[1] Done
[ 13.279379] .(1)[1:init]init: PropSet [dalvik.vm.heapgrowthlimit]=[256m] Done
[ 13.280357] .(1)[1:init]init: PropSet [dalvik.vm.heapsize]=[512m] Done
[ 13.281618] .(1)[1:init]init: PropSet [vendor.camera.mdp.dre.enable]=[0] Done
[ 13.281652] .(3)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 13.282566] .(1)[1:init]init: PropSet [vendor.camera.mdp.cz.enable]=[0] Done
[ 13.283538] .(1)[1:init]init: PropSet [bt.profiles.avrcp.multiPlayer.enable]=[0] Done
[ 13.284567] .(1)[1:init]init: PropSet [persist.radio.multisim.config]=[dsda] Done
[ 13.285554] .(1)[1:init]init: PropSet [persist.vendor.radio.msimmode]=[dsda] Done
[ 13.287406] .(1)[1:init]init: PropSet [persist.vendor.radio.flashless.fsm]=[0] Done
[ 13.288419] .(1)[1:init]init: PropSet [persist.vendor.radio.flashless.fsm_cst]=[0] Done
[ 13.289474] .(1)[1:init]init: PropSet [persist.vendor.radio.flashless.fsm_rw]=[0] Done
[ 13.290510] .(1)[1:init]init: PropSet [telephony.lteOnCdmaDevice]=[1] Done
[ 13.292010] .(1)[1:init]init: PropSet [persist.vendor.pms_removable]=[1] Done
[ 13.293399] .(1)[1:init]init: PropSet [persist.service.acm.enable]=[0] Done
[ 13.294392] .(1)[1:init]init: PropSet [persist.vendor.ims_support]=[1] Done
[ 13.295364] .(1)[1:init]init: PropSet [persist.vendor.mtk_dynamic_ims_switch]=[1] Done
[ 13.296458] .(1)[1:init]init: PropSet [persist.vendor.mims_support]=[1] Done
[ 13.297435] .(1)[1:init]init: PropSet [persist.vendor.mtk_wfc_support]=[1] Done
[ 13.298462] .(1)[1:init]init: PropSet [persist.vendor.volte_support]=[1] Done
[ 13.299468] .(1)[1:init]init: PropSet [persist.vendor.mtk.volte.enable]=[1] Done
[ 13.300502] .(1)[1:init]init: PropSet [persist.vendor.vilte_support]=[1] Done
[ 13.301536] .(1)[1:init]init: PropSet [persist.vendor.viwifi_support]=[1] Done
[ 13.302549] .(1)[1:init]init: PropSet [persist.vendor.vt.data_simulate]=[0] Done
[ 13.303527] .(1)[1:init]init: PropSet [persist.vendor.vt.rotate_delay]=[500] Done
[ 13.304613] .(1)[1:init]init: PropSet [persist.vendor.connsys.coredump.mode]=[2] Done
[ 13.305645] .(1)[1:init]init: PropSet [persist.vendor.connsys.chipid]=[-1] Done
[ 13.306610] .(1)[1:init]init: PropSet [persist.vendor.connsys.patch.version]=[-1] Done
[ 13.307651] .(1)[1:init]init: PropSet [persist.vendor.connsys.dynamic.dump]=[0] Done
[ 13.308669] .(1)[1:init]init: PropSet [vendor.connsys.driver.ready]=[no] Done
[ 13.309628] .(1)[1:init]init: PropSet [persist.radio.mobile.data]=[0,0] Done
[ 13.310557] .(1)[1:init]init: PropSet [persist.meta.dumpdata]=[0] Done
[ 13.311572] .(1)[1:init]init: PropSet [persist.vendor.radio.mtk_dsbp_support]=[1] Done
[ 13.312618] .(1)[1:init]init: PropSet [persist.vendor.radio.mtk_ps2_rat]=[G] Done
[ 13.313607] .(1)[1:init]init: PropSet [persist.vendor.radio.mtk_ps3_rat]=[G] Done
[ 13.314681] .(1)[1:init]init: PropSet [persist.vendor.log.tel_log_ctrl]=[1] Done
[ 13.317495] .(1)[1:init]init: Unable to set property 'persist,log.tag.SuppServHelper' to 'I' in property file '/vendor/build.prop': Illegal property name
[ 13.320652] .(1)[1:init]init: PropSet [vendor.mtk.vdec.waitkeyframeforplay]=[1] Done
[ 13.321806] .(1)[1:init]init: PropSet [debug.sf.disable_backpressure]=[1] Done
[ 13.323132] .(1)[1:init]init: PropSet [persist.vendor.mdlog.flush_log_ratio]=[66311] Done
[ 13.324246] .(1)[1:init]init: PropSet [Build.BRAND]=[MTK] Done
[ 13.325271] .(1)[1:init]init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 13.328571] .(2)[1:init]init: Command 'load_system_props' action=post-fs (/init.rc:317) took 99ms and succeeded
[ 13.330278] .(2)[1:init]init: starting service 'logd'...
[ 13.332626] .(2)[1:init]init: starting service 'servicemanager'...
[ 13.332752] .(0)[314:init]init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
[ 13.333175] .(0)[314:init]init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
[ 13.333531] .(0)[314:init]init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
[ 13.333689] .(0)[314:init]init: Opened file '/proc/kmsg', flags 0
[ 13.333728] .(0)[314:init]init: Opened file '/dev/kmsg', flags 1
[ 13.340374] .(1)[1:init]init: starting service 'hwservicemanager'...
[ 13.345126] .(0)[1:init]init: starting service 'vndservicemanager'...
[ 13.370952] .(1)[314:logd]audit: type=1400 audit(1262304101.710:4): avc: denied { read } for pid=314 comm="logd" name="u:object_r:persist_aee_prop:s0" dev="tmpfs" ino=1368 scontext=u:r:logd:s0 tcontext=u:object_r:persist_aee_prop:s0 tclass=file permissive=0
[ 13.374242] .(1)[314:logd]logd: init directcoredump done!
[ 13.380016] .(2)[314:logd]logd.auditd: start
[ 13.393593] .(2)[1:init]selinux: SELinux: Skipping restorecon_recursive(/cache)\x0a
[ 13.401481] .(3)[1:init]selinux: SELinux: Could not stat /metadata: No such file or directory.\x0a
[ 13.403588] .(3)[1:init]init: processing action (post-fs) from (/vendor/etc/init/hw/init.mt6735.rc:100)
[ 13.405354] .(1)[285:init]BOOTPROF: 13405.342031:INIT:post-fs
[ 13.411683] .(2)[1:init]init: processing action (post-fs) from (/vendor/etc/init/hw/init.aee.rc:8)
[ 13.413795] .(2)[1:init]init: starting service 'aee_aedv'...
[ 13.416923] .(1)[1:init]init: starting service 'aee_aedv64'...
[ 13.419036] .(1)[1:init]init: processing action (post-fs) from (/system/etc/init/hw/init.aee.rc:6)
[ 13.420785] .(1)[1:init]init: starting service 'aee_aed'...
[ 13.423367] .(1)[1:init]init: starting service 'aee_aed64'...
[ 13.425797] .(1)[1:init]init: processing action (post-fs) from (/vendor/etc/init/hw/init.ago.rc:6)
[ 13.435601] .(3)[1:init]zram0: detected capacity change from 0 to 1073741824
[ 13.471017] .(3)[1:init]mkswap: Swapspace size: 1048572k, UUID=4a15f10d-c7fc-44c9-904c-79c97f0cf87d
[ 13.472942] .(3)[1:init]Adding 1048572k swap on /dev/block/zram0. Priority:-1 extents:1 across:1048572k SS
[ 13.474774] .(3)[1:init]init: PropSet [hwservicemanager.ready]=[true] Done
[ 13.477723] .(1)[1:init]init: Command 'write /dev/memcg/memory.swappiness 100' action=post-fs (/vendor/etc/init/hw/init.ago.rc:9) took 1ms and failed: Unable to write to file '/dev/memcg/memory.swappiness': open() failed: Permission denied
[ 13.482384] .(1)[261:bat_thread_kthr][BATTERY] Default CC mode charging : 65000\x0d
[ 13.482415] .(3)[1:init]init: Command 'write /dev/memcg/apps/memory.swappiness 100' action=post-fs (/vendor/etc/init/hw/init.ago.rc:10) took 1ms and failed: Unable to write to file '/dev/memcg/apps/memory.swappiness': open() failed: Permission denied
[ 13.483866] .(3)[1:init]init: Command 'write /dev/memcg/system/memory.swappiness 100' action=post-fs (/vendor/etc/init/hw/init.ago.rc:11) took 1ms and failed: Unable to write to file '/dev/memcg/system/memory.swappiness': open() failed: Permission denied
[ 13.489021] .(1)[261:bat_thread_kthr][charging_set_cv_voltage] [0xf54]=0x5, [0xf4e]=0xcd
[ 13.490058] .(1)[261:bat_thread_kthr][BATTERY] pchr_turn_on_charging(), enable =1 \x0d
[ 13.492470] .(3)[261:bat_thread_kthr][100percent], UI_SOC(100), reset(1) bat_full(1) ever100(1)
[ 13.492545] .(2)[1:init]init: processing action (post-fs) from (/system/etc/init/atrace_userdebug.rc:7)
[ 13.492982] .(2)[1:init]init: processing action (late-fs) from (/init.rc:376)
[ 13.496086] .(3)[261:bat_thread_kthr]UI_SOC=(100), resetBatteryMeter=(1)
[ 13.497020] .(3)[261:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 100
[ 13.498503] .(3)[261:bat_thread_kthr][DLPT_POWER_OFF_EN] run
[ 13.500731] .(3)[1:init]init: starting service 'vendor.keymaster-3-0'...
[ 13.503681] .(3)[1:init]init: PropSet [persist.vendor.mtk.aeev.mode]=[4] Done
[ 13.504840] .(3)[1:init]init: processing action (post-fs-data) from (/init.rc:384)
[ 13.506280] .(3)[1:init]init: PropSet [persist.vendor.aeev.core.dump]=[enable] Done
[ 13.508513] .(1)[1:init]init: PropSet [persist.vendor.aeev.core.direct]=[enable] Done
[ 13.510772] .(1)[1:init]init: starting service 'vold'...
[ 13.513829] .(1)[1:init]init: PropSet [persist.vendor.mtk.aee.mode]=[4] Done
[ 13.515101] .(1)[1:init]init: PropSet [persist.vendor.aeev.fatal_db.count]=[4] Done
[ 13.518950] .(1)[1:init]init: PropSet [persist.vendor.aee.fatal_db.count]=[4] Done
[ 13.520582] .(1)[1:init]init: PropSet [persist.vendor.aeev.db.count]=[4] Done
[ 13.522111] .(1)[1:init]init: PropSet [persist.vendor.aee.db.count]=[4] Done
[ 13.568298] .(0)[325:aee_aedv]hang_detect: aee enable system_server coredump.
[ 13.578176] .(0)[333:aee_aedv][KL_ENV]cann't find name=forceencrypt_config
[ 13.587416] .(3)[333:aee_aedv][SPM] SPM firmware version count = 4
[ 13.588278] .(3)[333:aee_aedv][SPM] SPM firmware version(0x0) = suspend_v0.2.4.1.6.4.1_20151216
[ 13.589406] .(3)[333:aee_aedv][SPM] SPM firmware version(0x1) = sodi_v0.2.4.8.1_20160311-dummy_read
[ 13.590576] .(3)[333:aee_aedv][SPM] SPM firmware version(0x2) = deepidle_v0.2.5.6.4.1_20160311-dummy_read
[ 13.591884] .(3)[333:aee_aedv][SPM] SPM firmware version(0x3) = vcore_dvfs_v0.1.3.1_20150811-slow_dvs
[ 13.593208] .(3)[333:aee_aedv][SPM] SPM firmware version count = 4
[ 13.594020] .(3)[333:aee_aedv][SPM] SPM firmware version(0x0) = suspend_v0.2.4.1.6.4.1_20151216
[ 13.595137] .(3)[333:aee_aedv][SPM] SPM firmware version(0x1) = sodi_v0.2.4.8.1_20160311-dummy_read
[ 13.596312] .(3)[333:aee_aedv][SPM] SPM firmware version(0x2) = deepidle_v0.2.5.6.4.1_20160311-dummy_read
[ 13.597554] .(3)[333:aee_aedv][SPM] SPM firmware version(0x3) = vcore_dvfs_v0.1.3.1_20150811-slow_dvs
[ 13.599777] .(3)[327:aee_aed]Dump cpuinfo
[ 13.600627] .(1)[261:bat_thread_kthr]AvgVbat=(4372,4280),AvgI=(632,411),VChr=4929,AvgT=(18,18),SOC=(100,100),UI_SOC=100,ZCV=4371,CHR_Type=2 bcct:0:0 I:65000 Ibat:-195 fg:0
[ 13.602716] .(2)[1:init][BATTERY] Battery full !!\x0a\x0d
[ 13.603092] .(2)[1:init]init: starting service 'exec 2 (/system/bin/vdc --wait cryptfs init_user0)'...
[ 13.604319] .(2)[1:init]init: SVC_EXEC pid 334 (uid 0 gid 0+0 context default) started; waiting...
[ 13.605736] .(1)[324:logd.auditd]type=1400 audit(1262304101.950:5): avc: denied { read } for pid=327 comm="aee_aed" name="boot_mode" dev="sysfs" ino=56 scontext=u:r:aee_aed:s0 tcontext=u:object_r:sysfs_boot_mode:s0 tclass=file permissive=0
[ 13.606821] .(2)[261:bat_thread_kthr][100percent], UI_SOC(100), reset(0) bat_full(1) ever100(1)
[ 13.606825] .(2)[261:bat_thread_kthr][recharging] UI_SOC=100, SOC=100
[ 13.606829] .(2)[261:bat_thread_kthr]UI_SOC=(100), resetBatteryMeter=(0)
[ 13.606915] .(2)[261:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 100
[ 13.606918] .(2)[261:bat_thread_kthr][DLPT_POWER_OFF_EN] run
[ 13.662015] .(2)[1:init]init: PropSet [vold.has_adoptable]=[1] Done
[ 13.663008] .(2)[1:init]init: PropSet [vold.has_quota]=[0] Done
[ 13.663914] .(2)[1:init]init: PropSet [vold.has_reserved]=[1] Done
[ 13.664284] .(1)[334:vdc]vdc: Waited 30ms for vold
[ 13.667754] .(1)[324:logd.auditd]type=1400 audit(1262304101.950:5): avc: denied { read } for pid=327 comm="aee_aed" name="boot_mode" dev="sysfs" ino=56 scontext=u:r:aee_aed:s0 tcontext=u:object_r:sysfs_boot_mode:s0 tclass=file permissive=0
[ 13.668721] .(3)[332:Binder:332_2]audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
[ 13.668725] .(3)[332:Binder:332_2]audit: rate limit exceeded
[ 13.672366] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:6): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13842 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.675225] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:6): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13842 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.677940] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:7): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13979 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.680784] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:7): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13979 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.683583] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:8): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13910 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.686446] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:8): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13910 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.689165] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:9): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13358 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.692104] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:9): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13358 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.694818] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:10): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13379 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.697662] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:10): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13379 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.700403] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:11): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13395 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.703260] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:11): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13395 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.705975] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:12): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13411 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.708814] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:12): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13411 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.710718] .(2)[1:init]init: Service 'exec 2 (/system/bin/vdc --wait cryptfs init_user0)' (pid 334) exited with status 0 waiting took 0.106000 seconds
[ 13.713292] .(1)[324:logd.auditd]type=1400 audit(1262304102.010:13): avc: denied { write } for pid=332 comm="Binder:332_2" name="uevent" dev="sysfs" ino=13427 scontext=u:r:vold:s0 tcontext=u:object_r:sysfs_mmcblk:s0 tclass=file permissive=0
[ 13.732356] .(2)[1:init]init: starting service 'exec 3 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)'...
[ 13.734998] .(2)[1:init]init: SVC_EXEC pid 341 (uid 1000 gid 1000+0 context default) started; waiting...
[ 13.749220] .(2)[1:init]init: Service 'exec 3 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)' (pid 341) exited with status 0 waiting took 0.014000 seconds
[ 13.751441] .(2)[1:init]init: processing action (post-fs-data) from (/init.usb.rc:6)
[ 13.752729] .(2)[1:init]init: Command 'chown system system /sys/class/android_usb/android0/f_mass_storage/lun/file' action=post-fs-data (/init.usb.rc:7) took 0ms and failed: lchown() failed: Permission denied
[ 13.755222] .(2)[1:init]init: Command 'chmod 0660 /sys/class/android_usb/android0/f_mass_storage/lun/file' action=post-fs-data (/init.usb.rc:8) took 0ms and failed: fchmodat() failed: Permission denied
[ 13.759020] .(2)[1:init]init: processing action (post-fs-data) from (/vendor/etc/init/hw/init.mt6735.rc:136)
[ 13.760895] .(1)[285:init]BOOTPROF: 13760.885339:INIT:post-fs-data
[ 13.769947] .(2)[1:init]init: Command 'chmod 0660 /data/misc/wifi/p2p_supplicant.conf' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:168) took 0ms and failed: fchmodat() failed: Permission denied
[ 13.774265] .(0)[1:init]init: Command 'mkdir /data/drm/wv 0770 drm system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:176) took 0ms and failed: mkdir() failed: Permission denied
[ 13.776944] .(0)[1:init]init: Command 'mkdir /data/mdlog 0775 shell system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:179) took 0ms and failed: mkdir() failed: Permission denied
[ 13.780297] .(0)[1:init]init: Command 'mkdir /data/gps_mnl 0771 gps system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:186) took 0ms and failed: mkdir() failed: Permission denied
[ 13.783119] .(0)[1:init]init: Command 'mkdir /data/misc/gps 0770 gps system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:187) took 0ms and failed: mkdir() failed: Permission denied
[ 13.785738] .(0)[1:init]init: Command 'mkdir /data/nfc_socket 0771 nfc radio' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:190) took 0ms and failed: mkdir() failed: Permission denied
[ 13.789408] .(0)[1:init]init: Command 'mkdir /data/misc/dhcp 0770 dhcp wifi' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:202) took 0ms and failed: fchmodat() failed: Permission denied
[ 13.791835] .(1)[1:init]init: Command 'chown dhcp wifi /data/misc/dhcp' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:203) took 0ms and failed: lchown() failed: Permission denied
[ 13.794666] .(1)[1:init]init: Command 'mkdir /data/misc/wide-dhcpv6 0770 dhcp wifi' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:206) took 0ms and failed: mkdir() failed: Permission denied
[ 13.797573] .(1)[1:init]init: Command 'mkdir /data/misc/radvd 0770 system system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:210) took 0ms and failed: mkdir() failed: Permission denied
[ 13.801649] .(3)[73:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 819000 KHz
[ 13.802849] .(1)[1:init]init: Command 'mkdir /data/misc/rtc 0770 system system' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:241) took 0ms and failed: mkdir() failed: Permission denied
[ 13.817411] .(1)[1:init]init: Command 'mkdir /data/misc/ppp 0770 bluetooth net_bt' action=post-fs-data (/vendor/etc/init/hw/init.mt6735.rc:377) took 0ms and failed: mkdir() failed: Permission deniedm4h0n3y@troislitresdevodka:~$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment