WSL v2 windows hosts sync (powershell - updates domains to wsl2 ip)

wsl2-hosts-sync.ps1

# Requires -RunAsAdministrator
# Only works for WSL v2,  this is completely not needed for WSL v1 where u always can use 127.0.0.1 in hosts file

Clear-Host

if ((Get-InstalledModule "Carbon" -ErrorAction SilentlyContinue) -eq $null) {
    Install-Module -Name 'Carbon' -AllowClobber
}

Import-Module 'Carbon'

$wslIp = (wsl hostname -I) -replace ' ',''

Write-Host "Setting wsl v2 hosts entries to $wslIp"

$domains = @(
    'wsl2.local'
    # add more domains if necessary
)

foreach($domain in $domains) {
    Set-HostsEntry -IPAddress $wslIp -HostName $domain
}

Write-Host "Done!"

That may be partly correct, in the sense that hostname -I appears to only return the IP associated with eth0 when only a single distro is running (although I couldn't swear to it be consistent all the time). As soon as another WSL distro is started (in my case one that has been configured for systemd) hostname -I startes returning the ip for each bound device, for example below we can see eth0, docker0 and br-f69dc3652dfd ... and it does so in any of the wsl sessions until they are all shutdown (terminating doesn't appear to have any impact). The alternate method will always return the IP for eth0 so I think thats a better bet ?

ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 22:d7:2a:85:69:2f brd ff:ff:ff:ff:ff:ff
3: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 5e:ac:84:b2:47:08 brd ff:ff:ff:ff:ff:ff
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:15:5d:68:fc:62 brd ff:ff:ff:ff:ff:ff
    inet 172.26.19.142/20 brd 172.26.31.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::215:5dff:fe68:fc62/64 scope link
       valid_lft forever preferred_lft forever
5: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
6: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:eb:f4:41:8a brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
7: br-f69dc3652dfd: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:c6:c9:99:21 brd ff:ff:ff:ff:ff:ff
    inet 172.22.0.1/16 brd 172.22.255.255 scope global br-f69dc3652dfd
       valid_lft forever preferred_lft forever

# Requires -RunAsAdministrator
# Only works for WSL v2,  this is completely not needed for WSL v1 where u always can use 127.0.0.1 in hosts file
$currentUser = New-Object Security.Principal.WindowsPrincipal $([Security.Principal.WindowsIdentity]::GetCurrent())
$testadmin = $currentUser.IsInRole([Security.Principal.WindowsBuiltinRole]::Administrator)
if ($testadmin -eq $false) {
Start-Process powershell.exe -Verb RunAs -ArgumentList ('-noprofile -noexit -file "{0}" -elevated' -f ($myinvocation.MyCommand.Definition))
exit $LASTEXITCODE
}


Clear-Host

if ((Get-InstalledModule "Carbon" -ErrorAction SilentlyContinue) -eq $null) {
    Install-Module -Name 'Carbon' -AllowClobber
}

Import-Module 'Carbon'

$wslHostIp = (wsl cat /etc/resolv.conf | Select-String -Pattern "\d{1,3}(\.\d{1,3}){3}" -AllMatches).Matches.Value
$wslSelfIp = (wsl hostname -I) -replace ' ',''

Write-Host "Setting wsl v2 host ip to $wslHostIp"
Write-Host "Setting wsl v2 self ip to $wslSelfIp"

$wsl_host_domains = @(
    'wsl2.host'
)
$wsl_self_domains = @(
    'wsl2.self'
)

foreach($domain in $wsl_host_domains) {
    Set-HostsEntry -IPAddress $wslHostIp -HostName $domain
}

foreach($domain in $wsl_self_domains) {
    Set-HostsEntry -IPAddress $wslSelfIp -HostName $domain
}

Write-Host "Done!"

This is the script that I changed a little bit.

#!/bin/sh
export WINIP=$(cat /etc/resolv.conf | grep 'nameserver' | cut -f 2 -d ' ') 
export WSLIP=$(ip addr show eth0 | grep 'inet ' | cut -f 6 -d ' ' | cut -f 1 -d '/')
echo WINIP $WINIP
echo WSLIP $WSLIP

echo <Your Password> | sudo -S sed -i "/winip/c $WINIP\twinip" /etc/hosts
echo <Your Password> | sudo -S sed -i "/wslip/c $WSLIP\twslip" /etc/hosts

vim "+:%s/^.*winip/$WINIP\t\twinip/g" "+:%s/^.*wslip/$WSLIP\t\twslip/g" '+:wq' -E /mnt/c/Windows/System32/drivers/etc/hosts 

This is another solution. Run this script in ~/.bashrc can set hosts file both in win and linux.

Hi Guys!
The @derik007 bash version not working. :(
This is my version using Powershell; https://github.com/kallookoo/lamp/blob/feccb3e3c507f2d97afcc0962cb7e449ec0eeffb/src/win/hosts.ps1

Amazing. Thank you. It's perfect for my use case.

just for info, the @derik007 solution needs to use PowerShell as admin and execute "wsl", I've changed the last line :

vim "+:%s/^.*winip/$WINIP\t\twinip/g" "+:%s/^.*wslip/$WSLIP\t\twslip/g" '+:wq' -E /mnt/c/Windows/System32/drivers/etc/hosts

to

vi "+:%s/^.*wsl2.local/^$WSLIP wsl2.local/g" "+:wq" -E /mnt/c/Windows/System32/drivers/etc/hosts

I forked: https://gist.github.com/kakkun61/2139c240ac0dce1bb1606c1e8bc8038c

Added features:

• admin check
• run as admin
• install Carbon module if necessary
• remove old hosts entry
• multiple ip addr support

FWIW, my take can be found at https://gist.github.com/petski/1414048ca2db37592da2e7af13d718f5