Autorotation of your linux display script. Tested on Manjaro KDE, firstly go to https://github.com/hadess/iio-sensor-proxy, make and install (dont worry that is for GNOME ). When installed correctly monitor-sensor should work from command line giving you outputs from sensors. On the end make that script, and execute. It should work. Enjoy :)

autorotation.sh

#!/bin/bash
#This script will automaticly rotate your screen and change correctly touches from the screen.
#Before running the script:
#go to https://github.com/hadess/iio-sensor-proxy and and follow all steps to install the code.
#find your TOUCHPAD, and TRANSFORM, variables. You can find them using
#typing in terminal:
#xinput list
#tested on hp x360 13s-s150sa, manjaro kde
#in case when you dont want install iio-sensor-proxy you can use this script:
#https://gist.github.com/tuxflo/5b400c86a5ebde871d94c6bff94ad6cb
#but screen will only rotate once is executed.

#Update this according to output form command: xinput list
TOUCHPAD="ELAN Touchscreen"
TRANSFORM='Coordinate Transformation Matrix'

monitor-sensor | while read line
do

if [[ $line =~ .*left.* ]]
then
    xrandr -o left | xinput set-prop "$TOUCHPAD"    "$TRANSFORM" 0 -1 1 1 0 0 0 0 1
fi
if [[ $line =~ .*right.* ]]
then
    xrandr -o right | xinput set-prop "$TOUCHPAD"    "$TRANSFORM" 0 1 0 -1 0 1 0 0 1
fi
if [[ $line =~ .*bottom-up.* ]]
then
    xrandr -o inverted | xinput set-prop "$TOUCHPAD"    "$TRANSFORM" -1 0 1 0 -1 1 0 0 1
fi
if [[ $line =~ .*normal.* ]]
then
    xrandr -o normal | xinput set-prop "$TOUCHPAD"    "$TRANSFORM" 1 0 0 0 1 0 0 0 1

fi

For some reason on Ubuntu 25.04, this script is not working anymore. It used to work 2 years ago... Unfortunately I am not sure if I was using Ubuntu+XFCE or Xubuntu or if that even matters ... I digress.

I've tried the script again and now, it is not working anymore. I've tried switching to Xorg (logging out, settings bottom right, select Xorg, re-login) to no avail. Something must've changed. I "see" the accelerometer but it always returns 0 for xyz.

$ grep . /sys/bus/iio/devices/iio:device0/in_accel_*_raw
/sys/bus/iio/devices/iio:device0/in_accel_x_raw:0
/sys/bus/iio/devices/iio:device0/in_accel_y_raw:0
/sys/bus/iio/devices/iio:device0/in_accel_z_raw:0

I even rebuilt iio-sensor-proxy from https://gitlab.freedesktop.org/hadess/iio-sensor-proxy.git and it didn't help (You might have to rename some things in the meson config to get it to build. Honestly I wouldn't bother)

I am gonna try with a fresh install of Manjaro KDE and see if screen rotation works. Another theory is it being disabled because the "keyboard is still attached" on my laptop? Touchscreen is working fine. Lenovo Yoga 7 14ARB7 btw.

[rant]
Funnily enough, if you're reading this and want to know more, I've even went as far as installing the official Windows 11 Home Edition Bloatware OEM Lenovo Version (with all drivers, Vantage, Ads, Bloat, etc) via the Digital Download Recovery Service (DDRS) of Lenovo.

Even there, the rotation via accelerometer is not functioning.
[/rant]

Didn't work. Restarting iio-sensor-proxy (Ubuntu 25.04)

$ sudo systemctl restart iio-sensor-proxy.service
$ journalctl -u iio-sensor-proxy
[...]
Apr 23 17:43:25 myuser-Y7-14ARB7 systemd[1]: Started iio-sensor-proxy.service - IIO Sensor Proxy service.
Apr 23 17:43:25 myuser-Y7-14ARB7 iio-sensor-prox[7798]: Not a switch [/sys/devices/platform/AMDI0010:02/i2c-2/i2c-ITE8350:00/001>
Apr 23 17:43:25 myuser-Y7-14ARB7 iio-sensor-prox[7798]: Invalid bitmask entry for /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:0>

I give up for now.

You might laugh, but my sensor board cable (on the mainboard next to the fan) became loose so once I unplugged it, cleaned it with IPA and plugged it back in it started working...

For anyone else out there with a Lenovo Yoga 7 14ARB7, this is working great for me now (on Ubuntu 25.04, Xorg instead of Wayland):

#!/bin/bash
# This script will automatically rotate your screen and remap your Wacom devices
# Requires: monitor-sensor (from iio-sensor-proxy), xrandr, xsetwacom

# Update these according to `xinput list` / `xsetwacom --list devices`
OUTPUT="eDP"
WACOM_TOUCH="Wacom HID 52D3 Finger touch"
WACOM_STYLUS="Wacom HID 52D3 Pen stylus"
WACOM_ERASER="Wacom HID 52D3 Pen eraser"

monitor-sensor | while read line; do
    if [[ $line =~ .*left.* ]]; then
        # left
        xrandr --output "$OUTPUT" --rotate left
        xsetwacom set "$WACOM_TOUCH"   rotate ccw
        xsetwacom set "$WACOM_STYLUS"  rotate ccw
        xsetwacom set "$WACOM_ERASER"  rotate ccw

    elif [[ $line =~ .*right.* ]]; then
        # right
        xrandr --output "$OUTPUT" --rotate right
        xsetwacom set "$WACOM_TOUCH"   rotate cw
        xsetwacom set "$WACOM_STYLUS"  rotate cw
        xsetwacom set "$WACOM_ERASER"  rotate cw

    elif [[ $line =~ .*bottom-up.* ]]; then
        # inverted
        xrandr --output "$OUTPUT" --rotate inverted
        xsetwacom set "$WACOM_TOUCH"   rotate half
        xsetwacom set "$WACOM_STYLUS"  rotate half
        xsetwacom set "$WACOM_ERASER"  rotate half

    elif [[ $line =~ .*normal.* ]]; then
        # normal
        xrandr --output "$OUTPUT" --rotate normal
        xsetwacom set "$WACOM_TOUCH"   rotate none
        xsetwacom set "$WACOM_STYLUS"  rotate none
        xsetwacom set "$WACOM_ERASER"  rotate none
    fi
done

And this works for Ubuntu 25 (Wayland!)

Preparations:

sudo apt update
sudo apt install python3-dbus iio-sensor-proxy
mkdir -p ~/.local/bin
wget -O ~/.local/bin/gnome-randr.py   https://raw.githubusercontent.com/rickybrent/gnome-randr-py/main/gnome-randr.py
chmod +x ~/.local/bin/gnome-randr.py
python3 ~/.local/bin/gnome-randr.py --current # To check for your screenname, probably "eDP-1" but worth checking!

Then, have this in your autostart:

#!/usr/bin/env bash
#
# Auto-rotate screen on Ubuntu >24.04 GNOME/Wayland
# Uses monitor-sensor + gnome-randr-py

OUTPUT="eDP-1"       # ← set this to your panel name
RANDR_SCRIPT="$HOME/.local/bin/gnome-randr.py"

monitor-sensor | while read -r line; do
  case "$line" in
    *left*)       python3 "$RANDR_SCRIPT" --output "$OUTPUT" --rotate left   ;;
    *right*)      python3 "$RANDR_SCRIPT" --output "$OUTPUT" --rotate right  ;;
    *bottom-up*)  python3 "$RANDR_SCRIPT" --output "$OUTPUT" --rotate inverted;;
    *normal*)     python3 "$RANDR_SCRIPT" --output "$OUTPUT" --rotate normal ;;
  esac
done