DXVK async config for Slow APU processors

dxvk-for-APU.confg

#UPDATED: 2023-Abril-29 Experimental Smoothy v3.0 for the dxvk Version 1.2-3
#DXVK configuration for GPUs (NVIDIA & AMD). For testing with Intel ARC, use this configuration and also without it in WoW 3.3.5a.
#Author: Milor123 - Junklont
#IMPORTANT: Shadows are best set to Low, and Distance set to High or less. Do NOT use MAX and disable V-SYNC.
#IMPORTANT NOTE: Please do not test performance in Dalaran as it is poorly optimized, this map is a shi*****t
d3d9.maxFrameRate = 200 # Set manually for limit the Max FPS
dxvk.hud = fps # REMOVE THIS LINE FOR HIDE FPS HUD or write # for comment
d3d9.maxFrameLatency = 4
d3d9.numBackBuffers = 0 # // I GET MORE FPS IN 0 a mayor numero mayor calidad menos rendimiento
d3d9.presentInterval = 0 # Disable Vsync in 0
d3d9.tearFree = Auto # Vsync replace fuction  // I GET MORE FPS IN False
d3d9.maxAvailableMemory = 1000 # CHANGE IT FOR YOU RAM Size in MB
d3d9.evictManagedOnUnlock = True # forzar la liberación de la memoria utilizada por los recursos de la GPU después de que se desbloqueen en el juego
d3d9.allowDiscard = True # permitir que DXVK deseche los recursos de la GPU que ya no son necesarios
dxvk.enableAsync = True # It option only work in Async Version
dxvk.numCompilerThreads = 0 # CHANGE IT by your threads of CPU <----------------------
dxvk.numAsyncThreads = 0 # 0 is Automatic || It option only work in Async Version
#d3d9.customDeviceId = 0091
#d3d9.customVendorId = 10de
d3d9.samplerAnisotropy = 0
d3d9.invariantPosition = False # New bugs xD
d3d9.memoryTrackTest = True # Get memory values
d3d9.noExplicitFrontBuffer = True # deshabilitar el búfer frontal


# New patches
d3d9.strictConstantCopies = False # Only for GPU users with good GPU RTX >= 1060 or 1070 maybe if you use APU set in False
d3d9.lenientClear = True # Permite una limpieza menos riguroza = More performance
dxvk.maxChunkSize = 0 # 128 or 256 MiB for slow APU like Intel(R) HD Graphics 620
d3d9.longMad = False  # Change to True for try get more perfomance only enable if try use z-pass

############################## 
d3d9.floatEmulation = Auto # New Thing
# Supported values:
# - True: Use a faster but less accurate approach. Good enough for most games
# - False: Disable float emulation completely
# - Strict: Use a slower but more correct approach. Necessary for some games
# - Auto: DXVK will pick automatically
##############################
d3d9.forceSwapchainMSAA = 0
d3d9.supportVCache = False #Its only for Nvidia GPU (vcache query)
d3d9.forceSamplerTypeSpecConstants = False
dxvk.useRawSsbo = False # PLEASE NOT ENABLE IT, CAUSE LAGGY SHUTTERS


######## OPTIONAL SETTINGS, remove # for test
# For idiots games, it normaly by me should be true all
d3d9.supportD32 = False
d3d9.useD32forD24 = False

d3d9.supportX4R4G4B4 = False # CAUSE LAG AND LESS FPS GAIN. please dont ENABLE IT in Wow3.3.5a
d3d9.disableA8RT = True # improvement the login fast charging and other things very GOOD in TRUE
#########



#Explains:
# Some games think we are on Intel given a lack of NVAPI or
# AGS/atiadlxx support. Report our device memory as shared memory,
# and some small amount for a "carveout".
# Supported values: True, False

# dxgi.emulateUMA = False # IT says the game that we are using iGPU not NVAPI

I find out the problem with long blackscreen is just d3d9.dll and dxvk.conf files. I cannot use your config after newest GPU drivers for 4080. The blackscreen is about 5 seconds. When i tried to go back for older drivers its was just 1 second blackscreen flash. So is possible to edit or make something for dual monitor users?

Hi bro, i am searching it for you but dont found nothing!.
I am not sure, you could open a issue in https://github.com/doitsujin/dxvk/issues

Or could check it, doitsujin/dxvk#3792