Re-using existing payment

extra-payment-added-when-reusing-credit-card.rb

require_relative '../base'
require 'braintree'
require 'yaml'

module Examples
  module Checkout
    class WalkthroughWithExistingCreditCbard
      def self.run(client)
        braintree_config_file = File.dirname(__FILE__) + "/braintree.yml"
        unless File.exists?(braintree_config_file)
          client.pending "braintree.yml does not exist. Cannot proceed."
          exit
        end

        # Create the order step by step:
        # You may also choose to start it off with some line items
        # See checkout/creating_with_line_items.rb
        response = client.post('/api/orders')

        if response.status == 201
          client.succeeded "Created new checkout."
          order = JSON.parse(response.body)
          if order['email'] == '[email protected]'
            # Email addresses are necessary for orders to transition to address.
            # This just makes really sure that the email is already set.
            # You will not have to do this in your own API unless you've customized it.
            client.succeeded 'Email set automatically on order successfully.'
          else
            client.failed %Q{
        Email address was not automatically set on order.'
          -> This may lead to problems transitioning to the address step.
            }
          end
        else
          client.failed 'Failed to create a new blank checkout.'
        end

        # Assign a line item to the order we just created.

        response = client.post("/api/orders/#{order['number']}/line_items",
          {
            line_item: {
              variant_id: 1,
              quantity: 1
            }
          }
        )


        if response.status == 201
          client.succeeded "Added a line item."
        else
          client.failed "Failed to add a line item."
        end

        # Transition the order to the 'address' state
        response = client.put("/api/checkouts/#{order['number']}/next")
        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Transitioned order into address state."
        else
          client.failed "Could not transition order to address state."
        end

        # Add address information to the order
        # Before you make this request, you may need to make a request to one or both of:
        # - /api/countries
        # - /api/states
        # This will give you the correct country_id and state_id params to use for address information.

        # First, get the country:
        response = client.get('/api/countries?q[name_cont]=United States')
        if response.status == 200
          client.succeeded "Retrieved a list of countries."
          countries = JSON.parse(response.body)['countries']
          usa = countries.first
          if usa['name'] != 'United States'
            client.failed "Expected first country to be 'United States', but it wasn't."
          end
        else
          client.failed "Failed to retrieve a list of countries."
        end

        # Then, get the state we want from the states of that country:

        response = client.get("/api/countries/#{usa['id']}/states?q[name_cont]=Maryland")
        if response.status == 200
          client.succeeded "Retrieved a list of states."
          states = JSON.parse(response.body)['states']
          maryland = states.first
          if maryland['name'] != 'Maryland'
            client.failed "Expected first state to be 'Maryland', but it wasn't."
          end
        else
          client.failed "Failed to retrieve a list of states."
        end

        # We can finally submit some address information now that we have it all:

        address = {
          first_name: 'Test',
          last_name: 'User',
          address1: 'Unit 1',
          address2: '1 Test Lane',
          country_id: usa['id'],
          state_id: maryland['id'],
          city: 'Bethesda',
          zipcode: '20814',
          phone: '(555) 555-5555'
        }

        response = client.put("/api/checkouts/#{order['number']}",
          {
            order: {
              bill_address_attributes: address,
              ship_address_attributes: address
            }
          }
        )

        if response.status == 200
          client.succeeded "Address details added."
          order = JSON.parse(response.body)
          if order['state'] == 'delivery'
            client.succeeded "Order automatically transitioned to 'delivery'."
          else
            client.failed "Order failed to automatically transition to 'delivery'."
          end
        else
          client.failed "Could not add address details to order."
        end

        # Next step: delivery!

        first_shipment = order['shipments'].first
        response = client.put("/api/checkouts/#{order['number']}",
          {
            order: {
              shipments_attributes: [
                id: first_shipment['id'],
                selected_shipping_rate_id: first_shipment['shipping_rates'].first['id']
              ]
            }
          }
        )

        if response.status == 200
          client.succeeded "Delivery options selected."
          order = JSON.parse(response.body)
          if order['state'] == 'payment'
            client.succeeded "Order automatically transitioned to 'payment'."
          else
            client.failed "Order failed to automatically transition to 'payment'."
          end
        else
          client.failed "The store was not happy with the selected delivery options."
        end

        # Next step: payment!

        # First up: a credit card payment
        braintree_payment_method = order['payment_methods'].detect { |pm| pm['name'] == "Braintree" }

        response = client.put("/api/checkouts/#{order['number']}",
        {
          order: {
            payments_attributes: [{
              payment_method_id: braintree_payment_method['id']
            }],
          },
          payment_source: {
            braintree_payment_method['id'] => {
              number: '4111111111111111', # just a nonsense one. Will work with dummy CC gateway
              month: '1',
              year: '2017',
              verification_value: '123',
              name: 'John Smith',
            }
          }
        })

        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Payment details provided for the order."
          # Order will transition to the confirm state only if the selected payment
          # method allows for payment profiles.
          # The dummy Credit Card gateway in Spree does, so confirm is shown for this order.
          if order['state'] == 'confirm'
            client.succeeded "Order automatically transitioned to 'confirm'."
          else
            client.failed "Order did not transition automatically to 'confirm'."
          end
        else
          client.failed "Payment details were not accepted for the order."
        end

        source = order["payments"].first["source"]

        response = client.put("/api/checkouts/#{order['number']}",
        {
          order: {
            payments_attributes: [{
              payment_method_id: braintree_payment_method['id']
            }],
          },
          payment_source: {
            braintree_payment_method['id'] => {
              gateway_customer_profile_id: source["gateway_customer_profile_id"],
              gateway_payment_profile_id: source["gateway_payment_profile_id"],
            }
          }
        })

        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Second payment details provided for the order."
          # Order will transition to the confirm state only if the selected payment
          # method allows for payment profiles.
          # The dummy Credit Card gateway in Spree does, so confirm is shown for this order.
          if order['state'] == 'confirm'
            client.succeeded "Order automatically transitioned to 'confirm'."
          else
            client.failed "Order did not transition automatically to 'confirm'."
          end
        else
          client.failed "Payment details were not accepted for the order."
        end

        puts "RUN: Spree::CreditCard.order(:created_at).reverse_order.take(2) and see that the last two CCs are the same"
      end
    end
  end
end

Examples.run(Examples::Checkout::WalkthroughWithExistingCreditCard)

source-not-populated-when-using-payment-id.rb

require_relative '../base'
require 'braintree'
require 'yaml'

module Examples
  module Checkout
    class WalkthroughWithExistingCreditCard
      def self.run(client)
        braintree_config_file = File.dirname(__FILE__) + "/braintree.yml"
        unless File.exists?(braintree_config_file)
          client.pending "braintree.yml does not exist. Cannot proceed."
          exit
        end

        # Create the order step by step:
        # You may also choose to start it off with some line items
        # See checkout/creating_with_line_items.rb
        response = client.post('/api/orders')

        if response.status == 201
          client.succeeded "Created new checkout."
          order = JSON.parse(response.body)
          if order['email'] == '[email protected]'
            # Email addresses are necessary for orders to transition to address.
            # This just makes really sure that the email is already set.
            # You will not have to do this in your own API unless you've customized it.
            client.succeeded 'Email set automatically on order successfully.'
          else
            client.failed %Q{
        Email address was not automatically set on order.'
          -> This may lead to problems transitioning to the address step.
            }
          end
        else
          client.failed 'Failed to create a new blank checkout.'
        end

        # Assign a line item to the order we just created.

        response = client.post("/api/orders/#{order['number']}/line_items",
          {
            line_item: {
              variant_id: 1,
              quantity: 1
            }
          }
        )


        if response.status == 201
          client.succeeded "Added a line item."
        else
          client.failed "Failed to add a line item."
        end

        # Transition the order to the 'address' state
        response = client.put("/api/checkouts/#{order['number']}/next")
        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Transitioned order into address state."
        else
          client.failed "Could not transition order to address state."
        end

        # Add address information to the order
        # Before you make this request, you may need to make a request to one or both of:
        # - /api/countries
        # - /api/states
        # This will give you the correct country_id and state_id params to use for address information.

        # First, get the country:
        response = client.get('/api/countries?q[name_cont]=United States')
        if response.status == 200
          client.succeeded "Retrieved a list of countries."
          countries = JSON.parse(response.body)['countries']
          usa = countries.first
          if usa['name'] != 'United States'
            client.failed "Expected first country to be 'United States', but it wasn't."
          end
        else
          client.failed "Failed to retrieve a list of countries."
        end

        # Then, get the state we want from the states of that country:

        response = client.get("/api/countries/#{usa['id']}/states?q[name_cont]=Maryland")
        if response.status == 200
          client.succeeded "Retrieved a list of states."
          states = JSON.parse(response.body)['states']
          maryland = states.first
          if maryland['name'] != 'Maryland'
            client.failed "Expected first state to be 'Maryland', but it wasn't."
          end
        else
          client.failed "Failed to retrieve a list of states."
        end

        # We can finally submit some address information now that we have it all:

        address = {
          first_name: 'Test',
          last_name: 'User',
          address1: 'Unit 1',
          address2: '1 Test Lane',
          country_id: usa['id'],
          state_id: maryland['id'],
          city: 'Bethesda',
          zipcode: '20814',
          phone: '(555) 555-5555'
        }

        response = client.put("/api/checkouts/#{order['number']}",
          {
            order: {
              bill_address_attributes: address,
              ship_address_attributes: address
            }
          }
        )

        if response.status == 200
          client.succeeded "Address details added."
          order = JSON.parse(response.body)
          if order['state'] == 'delivery'
            client.succeeded "Order automatically transitioned to 'delivery'."
          else
            client.failed "Order failed to automatically transition to 'delivery'."
          end
        else
          client.failed "Could not add address details to order."
        end

        # Next step: delivery!

        first_shipment = order['shipments'].first
        response = client.put("/api/checkouts/#{order['number']}",
          {
            order: {
              shipments_attributes: [
                id: first_shipment['id'],
                selected_shipping_rate_id: first_shipment['shipping_rates'].first['id']
              ]
            }
          }
        )

        if response.status == 200
          client.succeeded "Delivery options selected."
          order = JSON.parse(response.body)
          if order['state'] == 'payment'
            client.succeeded "Order automatically transitioned to 'payment'."
          else
            client.failed "Order failed to automatically transition to 'payment'."
          end
        else
          client.failed "The store was not happy with the selected delivery options."
        end

        # Next step: payment!

        # First up: a credit card payment
        braintree_payment_method = order['payment_methods'].detect { |pm| pm['name'] == "Braintree" }

        response = client.put("/api/checkouts/#{order['number']}",
        {
          order: {
            payments_attributes: [{
              payment_method_id: braintree_payment_method['id']
            }],
          },
          payment_source: {
            braintree_payment_method['id'] => {
              number: '4111111111111111', # just a nonsense one. Will work with dummy CC gateway
              month: '1',
              year: '2017',
              verification_value: '123',
              name: 'John Smith',
            }
          }
        })

        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Payment details provided for the order."
          # Order will transition to the confirm state only if the selected payment
          # method allows for payment profiles.
          # The dummy Credit Card gateway in Spree does, so confirm is shown for this order.
          if order['state'] == 'confirm'
            client.succeeded "Order automatically transitioned to 'confirm'."
          else
            client.failed "Order did not transition automatically to 'confirm'."
          end
        else
          client.failed "Payment details were not accepted for the order."
        end

        source = order["payments"].first["source"]

        response = client.put("/api/checkouts/#{order['number']}",
        {
          order: {
            payments_attributes: [{
              payment_method_id: braintree_payment_method['id']
            }],
          },
          payment_source: {
            braintree_payment_method['id'] => {
              id: source["id"],
              # gateway_customer_profile_id: source["gateway_customer_profile_id"],
              # gateway_payment_profile_id: source["gateway_payment_profile_id"],
            }
          }
        })

        if response.status == 200
          order = JSON.parse(response.body)
          client.succeeded "Second payment details provided for the order."
          # Order will transition to the confirm state only if the selected payment
          # method allows for payment profiles.
          # The dummy Credit Card gateway in Spree does, so confirm is shown for this order.
          if order['state'] == 'confirm'
            client.succeeded "Order automatically transitioned to 'confirm'."
          else
            client.failed "Order did not transition automatically to 'confirm'."
          end
        else
          client.failed "Payment details were not accepted for the order."
        end

        if order['payments'].last['source'] == nil
          client.failed "Source is nil"
        else
          client.succeeded "Source is populated"
        end
      end
    end
  end
end

Examples.run(Examples::Checkout::WalkthroughWithExistingCreditCard)