| Plate | Plate in Orca/Bambu Slicers | Used For | Cleaning | Excels at | Notes | Mfr Link |
|---|---|---|---|---|---|---|
| Darkmoon Satin | Textured PEI Plate, H2D: Smooth High Temp Plate | PLA,PETG,TPU,ABS/ASA/PC/PA | IPA/Dawn | Workhorse plate for almost everything | Link | |
| Darkmoon CFX (Carbon Fiber) | Smooth High Temp Plate | PLA,PETG,TPU,ABS/ASA/PC/PA | IPA/Dawn | Engineering filaments | Pre-heat for everything but PLA, TPU. See next table for release/adhesion agent recommendations | Link |
| Darkmoon G10, incl. H2D (⬛️black) | Smooth High Temp Plate | PLA,PETG,TPU,ABS,ASA | IPA/Dawn | Great Adhesion, easy release, non-textured surface | Link | |
| Darkmoon G10 (⬜️white) | Textured PEI Plate | PLA,PETG,TPU,ABS,ASA | IPA/Dawn | Great Adhesion, easy release, non-textured surface. Great in timelapses ;) | Textured PEI plate for higher Z offset | Link |
| Darkmoon ICE | Textured PEI Plate | PLA,PETG |
Excellent adhesion and warp reduction at room temp, or in open printers | Link | ||
| Darkmoon LUX | Smooth High Temp plate | PLA,PETG,TPU | IPA/Dawn | unmatched mirror finish | Needs glue for everything but PLA or TPU | Link |
| Plate | Filament Type | Glue Stick For Release | Liquid Glue For Adhesion |
|---|---|---|---|
| CFX (Carbon Fiber) | ABS/ASA/PC/PETG/PLA/Polypropylene | No | Yes |
| CFX (Carbon Fiber) | Nylon (PA)/PET-CF/PPS/TPU | No | No |
| G10 | ABS/ASA/PLA/PETG/TPU | No | No |
| ICE | PLA/PETG | No | No |
| LUX | ABS/ASA//Nylon (PA)/PC/PETG | Yes | No |
| LUX | PLA/TPU | No | No |
| Satin | ABS/ASA//Nylon (PA)/PC/PETG/TPU | Yes | No |
| Satin | PLA/PET-CF | No | No |