Last active
October 19, 2020 09:45
-
-
Save MorphyDK/f246f70941da6dfaa86929af684e34f4 to your computer and use it in GitHub Desktop.
Share Wifi with Eth devices ( OpenVPN )
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/bash | |
# Share Wifi with Eth device | |
# Original source: | |
# https://raw.githubusercontent.com/arpitjindal97/raspbian-recipes/master/wifi-to-eth-route.sh | |
# | |
# This script is created to work with Raspbian Stretch | |
# but it can be used with most of the distributions | |
# by making few changes. | |
# | |
# Make sure you have already installed `dnsmasq` | |
# Please modify the variables according to your need | |
# Don't forget to change the name of network interface | |
# Check them with `ifconfig` | |
ip_address="192.168.2.1" | |
netmask="255.255.255.0" | |
dhcp_range_start="192.168.2.2" | |
dhcp_range_end="192.168.2.100" | |
dhcp_time="12h" | |
eth="eth0" | |
wlan="tun0" | |
sudo systemctl start network-online.target &> /dev/null | |
sudo iptables -F | |
sudo iptables -t nat -F | |
sudo iptables -t nat -A POSTROUTING -o $wlan -j MASQUERADE | |
sudo iptables -A FORWARD -i $wlan -o $eth -m state --state RELATED,ESTABLISHED -j ACCEPT | |
sudo iptables -A FORWARD -i $eth -o $wlan -j ACCEPT | |
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" | |
sudo ifconfig $eth $ip_address netmask $netmask | |
# Remove default route created by dhcpcd | |
sudo ip route del 0/0 dev $eth &> /dev/null | |
sudo systemctl stop dnsmasq | |
sudo rm -rf /etc/dnsmasq.d/* &> /dev/null | |
echo -e "interface=$eth\n\ | |
bind-interfaces\n\ | |
server=1.1.1.1\n\ | |
domain-needed\n\ | |
bogus-priv\n\ | |
dhcp-range=$dhcp_range_start,$dhcp_range_end,$dhcp_time" > /tmp/custom-dnsmasq.conf | |
sudo cp /tmp/custom-dnsmasq.conf /etc/dnsmasq.d/custom-dnsmasq.conf | |
sudo systemctl start dnsmasq |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment