Created
August 4, 2024 15:49
-
-
Save Nathan22211/2bedd42e21d034798efbac3da6a7da01 to your computer and use it in GitHub Desktop.
This file has been truncated, but you can view the full file.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ===== Config file ===== | |
| [respond] | |
| [gcode_macro CHOPPER_TUNE] | |
| description = Vibrations tests to calculate lowest magnitude drivers registers v1.2 | |
| variable_debug = False | |
| variable_inset = 10 | |
| variable_current_change_step = 25 | |
| variable_measure_time = 1250 | |
| variable_required_rpm = [37.5, 150, 1.5] | |
| variable_delay = 500 | |
| gcode = | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| _detect_driver stepper={axis} | |
| _chop_workflow axis={axis} {rawparams} | |
| [gcode_shell_command chop_tune] | |
| command = ~/chopper-resonance-tuner/chopper_plot.sh | |
| timeout = 9999.0 | |
| verbose = True | |
| [gcode_macro _detect_driver] | |
| description = Find which driver is used in configuration | |
| variable_drivers = '2130', '2208', '2209', '2660', '2240', '5160' | |
| variable_driver = 0 | |
| variable_resistor = 0 | |
| gcode = | |
| {% set stepper = 'stepper_' + params.STEPPER|string|lower %} | |
| {% for driver in drivers %} | |
| {% if 'run_current' in printer.configfile.config['tmc' + driver + ' ' + stepper] %} | |
| {action_respond_info('Selected tmc%s for %s' % (driver, stepper))} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=driver VALUE={driver} | |
| {% if driver != '2240' %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].sense_resistor %} | |
| {% else %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].rref %} | |
| {% endif %} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=resistor VALUE={resistor} | |
| {% endif %} | |
| {% endfor %} | |
| [gcode_macro _chop_apply_regs] | |
| variable_registers = 'tbl', 'toff', 'hend', 'hstrt', 'tpfd', 'curr' | |
| variable_amount = 0 | |
| variable_tbl = -1 | |
| variable_toff = -1 | |
| variable_hend = -1 | |
| variable_hstrt = -1 | |
| variable_tpfd = -1 | |
| variable_curr = -1 | |
| gcode = | |
| {% if printer['gcode_macro _chop_apply_regs'][params.FIELD]|int != params.VALUE|int %} | |
| {% for stepper in params.STEPPERS.split('-') %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to {params.VALUE|int} on {stepper} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% for count in range(1, amount + 1) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to { | |
| params.VALUE|int} on {stepper|string + count|string} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper|string + count|string} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={params.FIELD|string|lower} VALUE={params.VALUE|int} | |
| {% endif %} | |
| [gcode_macro _chop_workflow] | |
| description = Calculate process of CHOPPER_TUNE macro | |
| gcode = | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set driver = printer['gcode_macro _detect_driver'].driver|string|lower %} | |
| {% set sense_resistor = printer['gcode_macro _detect_driver'].resistor %} | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set current_change_step = printer['gcode_macro CHOPPER_TUNE'].current_change_step %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set required_rpm = printer['gcode_macro CHOPPER_TUNE'].required_rpm %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| {% set inset = printer['gcode_macro CHOPPER_TUNE'].inset %} | |
| {% set config = printer.configfile.config %} | |
| {% set settings = printer.configfile.settings %} | |
| {% set measure_time = printer['gcode_macro CHOPPER_TUNE'].measure_time / 1000|float %} | |
| {% set delay = printer['gcode_macro CHOPPER_TUNE'].delay|int %} | |
| {% set kinematics = config.printer.kinematics|string %} | |
| {% if axis in ['x', 'y', 'z'] %} | |
| {% if kinematics == 'corexy' %} | |
| {% if axis in ['x', 'y'] %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% endif %} | |
| {% set steppers = ['stepper_x', 'stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% elif kinematics == 'cartesian' %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% set steppers = ['stepper_x'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% set steppers = ['stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Script does not support your kinematics')} | |
| {% endif %} | |
| {% if axes[0] == 'z' %} | |
| {% set minAX = (settings['stepper_' + axes[0]].position_min|float, 0)|max + inset %} | |
| {% set acceleration = settings.printer.max_z_accel|int %} | |
| {% set trv_speed = config.printer.max_z_velocity|int / 2 * 60 %} | |
| {% else %} | |
| {% set minAX = settings['stepper_' + axes[0]].position_min|float + inset %} | |
| {% set acceleration = config.printer.max_accel|int %} | |
| {% set trv_speed = config.printer.max_velocity|int / 2 * 60 %} | |
| {% endif %} | |
| {% set maxAX = settings['stepper_' + axes[0]].position_max|float - inset %} | |
| {% set midAX = settings['stepper_' + axes[0]].position_min|float + | |
| ((settings['stepper_' + axes[0]].position_max|float - | |
| settings['stepper_' + axes[0]].position_min|float) / 2) %} | |
| {% set midBAX = settings['stepper_' + axes[1]].position_min|float + | |
| ((settings['stepper_' + axes[1]].position_max|float - | |
| settings['stepper_' + axes[1]].position_min|float) / 2) %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Incorrect direction')} | |
| {% endif %} | |
| {% if tpfd_min != -1 or tpfd_max != -1 %} | |
| {% if driver == '5160' or driver == '2240' %} | |
| {% if tpfd_min < 0 or tpfd_max < 0 %} | |
| {action_raise_error('WARNING!!! Incorrect TPFD values')} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! TMC%s not support register TPFD' % (driver))} | |
| {% endif %} | |
| {% endif %} | |
| {% for register in printer['gcode_macro _chop_apply_regs'].registers %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={register|string|lower} VALUE=-1 | |
| {% endfor %} | |
| {% for mot in range(8) %} | |
| {% if ('stepper_' + axes[0] + mot|string) in config %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE=amount VALUE={mot} | |
| {% if ('stepper_' + axes[0] + (mot + 1)|string) not in config %} | |
| {action_respond_info('Selected %dwd configuration' % (mot + 1))} | |
| {% endif %} | |
| {% elif mot == 1 %} | |
| {action_respond_info('Selected 1wd configuration')} | |
| {% endif %} | |
| {% endfor %} | |
| {% if accel_chip == 'default' %} | |
| {% if 'accel_chip' in config.resonance_tester %} | |
| {% set accel_chip = config.resonance_tester.accel_chip %} | |
| {% else %} | |
| {% set accel_chip = 'adxl345' %} | |
| {% endif %} | |
| {% endif %} | |
| {action_respond_info('Selected %s for accelerometer' % (accel_chip))} | |
| {% if current_min == 'default' %} | |
| {% set current_min = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_min' % (current_min))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_min = current_min|int %} | |
| {% endif %} | |
| {% if current_max == 'default' %} | |
| {% set current_max = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int%} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_max' % (current_max))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_max = current_max|int %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set current_max = current_min %} | |
| {% set tbl_min = settings['tmc' + driver + ' ' + steppers[0]].driver_tbl|int %} | |
| {% set tbl_max = tbl_min %} | |
| {% set toff_min = settings['tmc' + driver + ' ' + steppers[0]].driver_toff|int %} | |
| {% set toff_max = toff_min %} | |
| {% set hstrt_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hstrt|int %} | |
| {% set hstrt_max = hstrt_min %} | |
| {% set hend_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hend|int %} | |
| {% set hend_max = hend_min %} | |
| {% set rotation_dist = config[steppers[0]].rotation_distance|float %} | |
| {% set gear_ratio = (config[steppers[0]].gear_ratio|default('1:1')).split(':') %} | |
| {% set full_steps_per_rotation = config[steppers[0]].full_steps_per_rotation|default(200)|int %} | |
| {% if min_speed == 'default' %} | |
| {% set min_speed = (required_rpm[0] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|float %} | |
| {% else %} | |
| {% set min_speed = min_speed|float %} | |
| {% endif %} | |
| {% if max_speed == 'default' %} | |
| {% set max_required_mms = (required_rpm[1] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|int %} | |
| {% set max_speed = (((-acceleration * measure_time + ((acceleration * measure_time) ** 2 + | |
| 4 * acceleration * (maxAX - minAX)) ** 0.5) / 2), max_required_mms)|min|float %} | |
| {% else %} | |
| {% set max_speed = max_speed|float %} | |
| {% endif %} | |
| {% if speed_change_step == 'default' %} | |
| {% set speed_change_step = required_rpm[2] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist %} | |
| {% else %} | |
| {% set speed_change_step = speed_change_step|float %} | |
| {% endif %} | |
| {% else %} | |
| {% if min_speed == 'default' or max_speed == 'default' %} | |
| {action_raise_error('WARNING!!! Resonance speed must be defined')} | |
| {% endif %} | |
| {% set min_speed, max_speed = min_speed|float, max_speed|float %} | |
| {% set speed_change_step = 1 %} | |
| {% endif %} | |
| {% if max_speed > trv_speed / 30 %} | |
| {action_raise_error('WARNING!!! Required speed (%d mm/s) on axis (%s)' | |
| ' is faster than kinematics allow, please lower speed or increase' | |
| ' speed limit in printer.cfg' % (max_speed, axes[0]))} | |
| {% endif %} | |
| {% set accel_decel_distance = max_speed ** 2 / acceleration %} | |
| {% set auto_travel_distance = accel_decel_distance + (max_speed * measure_time) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Acceleration & deceleration zone = %f mm' % (accel_decel_distance))} | |
| {action_respond_info('Auto calculated min required travel distance = %f mm' % (auto_travel_distance))} | |
| {% endif %} | |
| {% if travel_distance == 'default' %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Required travel distance on axis (%s)' | |
| ' (%.2f mm) is longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% else %} | |
| {% set travel_distance = travel_distance|int %} | |
| {% if minAX + travel_distance > maxAX %} | |
| {% set travel_distance = maxAX - minAX %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less than' | |
| ' it should be, please increase acceleration or lower speed' % (axes[0]))} | |
| {% else %} | |
| {action_respond_info('WARNING!!! Travel distance on axis (%s)' | |
| ' is longer than kinematics allows, lowering...' % (axes[0]))} | |
| {% endif %} | |
| {% else %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less' | |
| ' than required (%.2f mm), and longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {action_respond_info('Final max travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start find vibration mode, speed: %.2f --> %.2f mm/s with %.2f step current=%d TBL=%d TOFF=%d' | |
| ' HSTRT=%d HEND=%d' % (min_speed, max_speed, speed_change_step, current_min, tbl_min, toff_min, hstrt_min, hend_min))} | |
| {% else %} | |
| {action_respond_info('Final travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start of register enumeration mode, speed: %.2f --> %.2f mm/s current: %d' | |
| ' --> %d mA iterations=%d TBL: %d --> %d TOFF: %d --> %d HSTRT: %d --> %d HEND: %d --> %d TPFD:' | |
| ' %d --> %d' % (min_speed, max_speed, current_min, current_max, iterations, tbl_min, tbl_max, | |
| toff_min, toff_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max))} | |
| {% endif %} | |
| {% if not 'xyz' in printer.toolhead.homed_axes %} | |
| G28 X Y Z | |
| {% endif %} | |
| SET_VELOCITY_LIMIT ACCEL={acceleration} | |
| SET_VELOCITY_LIMIT ACCEL_TO_DECEL={acceleration} | |
| G0 {axes[0]}{minAX} {axes[1]}{midBAX} F{trv_speed} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='cleaner' | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| G4 P5000 | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| {% for current in range(current_min, current_max + 1, current_change_step) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=curr value={current} | |
| {% for tbl in range(tbl_min, tbl_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tbl value={tbl} | |
| {% for toff in range(toff_min, toff_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=toff value={toff} | |
| {% for hstrt_value in range(hstrt_min, hstrt_max + 1) %} | |
| {% for hend_value in range(hend_min, hend_max + 1) %} | |
| {% if hend_value + hstrt_value <= hstrt_hend_max %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hend value={hend_value} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hstrt value={hstrt_value} | |
| {% for tpfd in range(tpfd_min, tpfd_max + 1) %} | |
| {% if tpfd_min != -1 and tpfd_max != -1 %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tpfd value={tpfd} | |
| {% endif %} | |
| DUMP_TMC STEPPER={steppers[0]} REGISTER=chopconf | |
| {% for speed in range((min_speed * 100)|int, (max_speed * 100)|int + 1, (speed_change_step * 100)|int) %} | |
| {% set speed = speed / 100 %} | |
| {% for i in range(iterations) %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set travel_distance = (travel_distance / max_speed) * speed %} | |
| G4 P{delay} | |
| M118 Speed {speed|round(2)} mm/s on {travel_distance|round(2)} mm | |
| {% endif %} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX + travel_distance} F{speed*60} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX} F{trv_speed} | |
| M400 | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% if tpfd_min == -1 or tpfd_max == -1 %} | |
| {% set tpfd_min, tpfd_max = 0, 0 %} | |
| {% endif %} | |
| G4 P500 | |
| G0 {axis}{midAX} F{trv_speed} | |
| {% if run_plotter == 'true' or run_plotter == '1' %} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d hstrt_max=%d' | |
| ' hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| M118 For run parser manually type - RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d' | |
| ' hstrt_max=%d hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| {% endif %} | |
| [virtual_sdcard] | |
| path = ~/printer_data/gcodes | |
| on_error_gcode = CANCEL_PRINT | |
| [pause_resume] | |
| [display_status] | |
| [gcode_macro CANCEL_PRINT] | |
| description = Cancel the actual running print | |
| rename_existing = BASE_CANCEL_PRINT | |
| gcode = | |
| TURN_OFF_HEATERS | |
| CLEAR_PAUSE | |
| SDCARD_RESET_FILE | |
| BASE_CANCEL_PRINT | |
| G90 | |
| G0 X350 Y350 F3600 | |
| SET_SKEW CLEAR=1 | |
| [gcode_macro PAUSE] | |
| description = Pause the actual running print | |
| rename_existing = PAUSE_BASE | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set idle_timeout = client.idle_timeout|default(0) %} | |
| {% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %} | |
| {% set restore = False if printer.toolhead.extruder == '' | |
| else True if params.RESTORE|default(1)|int == 1 else False %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}" | |
| {% if idle_timeout > 0 %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout} | |
| SET_IDLE_TIMEOUT TIMEOUT={idle_timeout} | |
| {% endif %} | |
| PAUSE_BASE | |
| {client.user_pause_macro|default("")} | |
| _TOOLHEAD_PARK_PAUSE_CANCEL {rawparams} | |
| [gcode_macro RESUME] | |
| description = Resume the actual running print | |
| rename_existing = RESUME_BASE | |
| variable_last_extruder_temp = {'restore': False, 'temp': 0} | |
| variable_restore_idle_timeout = 0 | |
| variable_idle_state = False | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set sp_move = client.speed_move|default(velocity) %} | |
| {% set runout_resume = True if client.runout_sensor|default("") == "" | |
| else True if not printer[client.runout_sensor].enabled | |
| else printer[client.runout_sensor].filament_detected %} | |
| {% set can_extrude = True if printer.toolhead.extruder == '' | |
| else printer[printer.toolhead.extruder].can_extrude %} | |
| {% set do_resume = False %} | |
| {% set prompt_txt = [] %} | |
| {% if printer.idle_timeout.state|upper == "IDLE" or idle_state %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False | |
| {% if last_extruder_temp.restore %} | |
| RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }' | |
| M109 S{last_extruder_temp.temp} | |
| {% set do_resume = True %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% if runout_resume %} | |
| {% if do_resume %} | |
| {% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} | |
| {client.user_resume_macro|default("")} | |
| _CLIENT_EXTRUDE | |
| RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}' | |
| {% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %} | |
| {% endif %} | |
| {% if not (runout_resume and do_resume) %} | |
| RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!" | |
| {% for element in prompt_txt %} | |
| RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}' | |
| {% endfor %} | |
| RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info" | |
| RESPOND TYPE=command MSG="action:prompt_show" | |
| {% endif %} | |
| [gcode_macro SET_PAUSE_NEXT_LAYER] | |
| description = Enable a pause if the next layer is reached | |
| gcode = | |
| {% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %} | |
| {% set ENABLE = params.ENABLE|default(1)|int != 0 %} | |
| {% set MACRO = params.MACRO|default(pause_next_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}" | |
| [gcode_macro SET_PAUSE_AT_LAYER] | |
| description = Enable/disable a pause if a given layer number is reached | |
| gcode = | |
| {% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %} | |
| {% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined | |
| else params.LAYER is defined %} | |
| {% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %} | |
| {% set MACRO = params.MACRO|default(pause_at_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}" | |
| [gcode_macro SET_PRINT_STATS_INFO] | |
| rename_existing = SET_PRINT_STATS_INFO_BASE | |
| description = Overwrite, to get pause_next_layer and pause_at_layer feature | |
| variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" } | |
| variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" } | |
| gcode = | |
| {% if pause_next_layer.enable %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}' | |
| {pause_next_layer.call} | |
| SET_PAUSE_NEXT_LAYER ENABLE=0 | |
| {% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}' | |
| {pause_at_layer.call} | |
| SET_PAUSE_AT_LAYER ENABLE=0 | |
| {% endif %} | |
| SET_PRINT_STATS_INFO_BASE {rawparams} | |
| [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL] | |
| description = Helper: park toolhead used in PAUSE and CANCEL_PRINT | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %} | |
| {% set custom_park_x = client.custom_park_x|default(0.0) %} | |
| {% set custom_park_y = client.custom_park_y|default(0.0) %} | |
| {% set park_dz = client.custom_park_dz|default(2.0)|abs %} | |
| {% set sp_hop = client.speed_hop|default(15) * 60 %} | |
| {% set sp_move = client.speed_move|default(velocity) * 60 %} | |
| {% set origin = printer.gcode_move.homing_origin %} | |
| {% set act = printer.gcode_move.gcode_position %} | |
| {% set max = printer.toolhead.axis_maximum %} | |
| {% set cone = printer.toolhead.cone_start_z|default(max.z) %} | |
| {% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch'] | |
| else False %} | |
| {% set z_min = params.Z_MIN|default(0)|float %} | |
| {% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %} | |
| {% set x_park = params.X if params.X is defined | |
| else custom_park_x if use_custom | |
| else 0.0 if round_bed | |
| else (max.x - 5.0) %} | |
| {% set y_park = params.Y if params.Y is defined | |
| else custom_park_y if use_custom | |
| else (max.y - 5.0) if round_bed and z_park < cone | |
| else 0.0 if round_bed | |
| else (max.y - 5.0) %} | |
| _CLIENT_RETRACT | |
| {% if "xyz" in printer.toolhead.homed_axes %} | |
| G90 | |
| G1 Z{z_park} F{sp_hop} | |
| G1 X{x_park} Y{y_park} F{sp_move} | |
| {% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='Printer not homed' | |
| {% endif %} | |
| [gcode_macro _CLIENT_EXTRUDE] | |
| description = Extrudes, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %} | |
| {% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_unretract)|default(35) %} | |
| {% set absolute_extrude = printer.gcode_move.absolute_extrude %} | |
| {% if printer.toolhead.extruder != '' %} | |
| {% if printer[printer.toolhead.extruder].can_extrude %} | |
| {% if use_fw_retract %} | |
| {% if length < 0 %} | |
| G10 | |
| {% else %} | |
| G11 | |
| {% endif %} | |
| {% else %} | |
| M83 | |
| G1 E{length} F{(speed|float|abs) * 60} | |
| {% if absolute_extrude %} | |
| M82 | |
| {% endif %} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}' | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _CLIENT_RETRACT] | |
| description = Retracts, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set length = params.LENGTH|default(client.retract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_retract)|default(35) %} | |
| _CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs} | |
| [autotune_tmc stepper_x] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc stepper_y] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc extruder] | |
| motor = moons-cse14hra1l410a | |
| tuning_goal = performance | |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing = _BED_MESH_CALIBRATE | |
| gcode = | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} | |
| {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} | |
| {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} | |
| {% set attach_macro = kamp_settings.attach_macro | string %} | |
| {% set detach_macro = kamp_settings.detach_macro | string %} | |
| {% set mesh_margin = kamp_settings.mesh_margin | float %} | |
| {% set fuzz_amount = kamp_settings.fuzz_amount | float %} | |
| {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} | |
| {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} | |
| {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %} | |
| {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %} | |
| {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} | |
| {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} | |
| {% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} | |
| {% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} | |
| {% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %} | |
| {% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %} | |
| {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %} | |
| {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %} | |
| {% if (([points_x, points_y]|max) > 6) %} | |
| {% set algorithm = "bicubic" %} | |
| {% set min_points = 4 %} | |
| {% else %} | |
| {% set algorithm = "lagrange" %} | |
| {% set min_points = 3 %} | |
| {% endif %} | |
| {% set points_x = [points_x , min_points]|max %} | |
| {% set points_y = [points_y , min_points]|max %} | |
| {% set points_x = [points_x , probe_count[0]]|min %} | |
| {% set points_y = [points_y , probe_count[1]]|min %} | |
| {% if verbose_enable == True %} | |
| {% if printer.exclude_object.objects != [] %} | |
| { action_respond_info( "Algorithm: {}.".format( | |
| (algorithm), | |
| )) } | |
| { action_respond_info("Default probe count: {},{}.".format( | |
| (probe_count[0]), | |
| (probe_count[1]), | |
| )) } | |
| { action_respond_info("Adapted probe count: {},{}.".format( | |
| (points_x), | |
| (points_y), | |
| )) } | |
| {action_respond_info("Default mesh bounds: {}, {}.".format( | |
| (bed_mesh_min[0],bed_mesh_min[1]), | |
| (bed_mesh_max[0],bed_mesh_max[1]), | |
| )) } | |
| {% if mesh_margin > 0 %} | |
| {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format( | |
| (mesh_margin), | |
| (mesh_margin), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Mesh margin is 0, margin not increased.")} | |
| {% endif %} | |
| {% if fuzz_amount > 0 %} | |
| {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format( | |
| (fuzz_amount), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")} | |
| {% endif %} | |
| { action_respond_info("Adapted mesh bounds: {}, {}.".format( | |
| (adapted_x_min, adapted_y_min), | |
| (adapted_x_max, adapted_y_max), | |
| )) } | |
| {action_respond_info("KAMP adjustments successful. Happy KAMPing!")} | |
| {% else %} | |
| {action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")} | |
| G4 P5000 | |
| {% endif %} | |
| {% endif %} | |
| {% if probe_dock_enable == True %} | |
| {attach_macro} | |
| {% endif %} | |
| _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y} | |
| {% if probe_dock_enable == True %} | |
| {detach_macro} | |
| {% endif %} | |
| [gcode_macro LINE_PURGE] | |
| description = A purge macro that adapts to be near your actual printed objects | |
| gcode = | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %} | |
| {% if printer.firmware_retraction is defined %} | |
| {% set RETRACT = G10 | string %} | |
| {% set UNRETRACT = G11 | string %} | |
| {% else %} | |
| {% set RETRACT = 'G1 E-.5 F2100' | string %} | |
| {% set UNRETRACT = 'G1 E.5 F2100' | string %} | |
| {% endif %} | |
| {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %} | |
| {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %} | |
| {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %} | |
| {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %} | |
| {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %} | |
| {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} | |
| {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} | |
| {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} | |
| {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} | |
| {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} | |
| {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} | |
| {% set purge_move_speed = (flow_rate / 5.0) * 60 | float %} | |
| {% if cross_section < 5 %} | |
| {action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")} | |
| {% else %} | |
| {% if verbose_enable == True %} | |
| {action_respond_info("Moving filament tip {}mms".format( | |
| (tip_distance), | |
| )) } | |
| {% endif %} | |
| {% if printer.firmware_retraction is defined %} | |
| {action_respond_info("KAMP purge is using firmware retraction.")} | |
| {% else %} | |
| {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")} | |
| {% endif %} | |
| {% if purge_y_origin > 0 %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_center), | |
| (purge_y_origin), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% else %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_origin), | |
| (purge_y_center), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Prepurge_State | |
| {% if purge_y_origin > 0 %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_center} Y{purge_y_origin} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 X{purge_x_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% else %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_origin} Y{purge_y_center} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 Y{purge_y_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% endif %} | |
| RESTORE_GCODE_STATE NAME=Prepurge_State | |
| {% endif %} | |
| [gcode_macro SMART_PARK] | |
| description = Parks your printhead near the print area for pre-print hotend heating. | |
| gcode = | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set z_height = kamp_settings.smart_park_height | float %} | |
| {% set purge_margin = kamp_settings.purge_margin | float %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} | |
| {% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} | |
| {% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %} | |
| {% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(center_x) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(center_y) %} | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% if purge_margin > 0 and x_min != center_x and y_min != center_y %} | |
| {% set x_min = [ x_min - purge_margin , x_min ] | min %} | |
| {% set y_min = [ y_min - purge_margin , y_min ] | min %} | |
| {% set x_min = [ x_min , axis_minimum_x ] | max %} | |
| {% set y_min = [ y_min , axis_minimum_y ] | max %} | |
| {% endif %} | |
| {% if verbose_enable == True %} | |
| { action_respond_info("Smart Park location: {},{}.".format( | |
| (x_min), | |
| (y_min), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Presmartpark_State | |
| G90 | |
| {% if printer.toolhead.position.z < z_height %} | |
| G0 Z{z_height} | |
| {% endif %} | |
| G0 X{x_min} Y{y_min} F{travel_speed} | |
| G0 Z{z_height} | |
| RESTORE_GCODE_STATE NAME=Presmartpark_State | |
| [gcode_macro _KAMP_Settings] | |
| description = This macro contains all adjustable settings for KAMP | |
| variable_verbose_enable = True | |
| variable_mesh_margin = 5 | |
| variable_fuzz_amount = 1 | |
| variable_probe_dock_enable = False | |
| variable_attach_macro = 'Attach_Probe' | |
| variable_detach_macro = 'Dock_Probe' | |
| variable_purge_height = 0.8 | |
| variable_tip_distance = 0 | |
| variable_purge_margin = 10 | |
| variable_purge_amount = 30 | |
| variable_flow_rate = 12 | |
| variable_smart_park_height = 10 | |
| gcode = | |
| {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")} | |
| [gcode_macro _TAP_VARIABLES] | |
| variable_probing = 0 | |
| variable_brushed = 0 | |
| gcode = | |
| [homing_override] | |
| axes = xyz | |
| gcode = | |
| {% if 'x' not in printer.toolhead.homed_axes %} | |
| G28 X | |
| {% endif %} | |
| {% if 'y' not in printer.toolhead.homed_axes %} | |
| G28 Y | |
| {% endif %} | |
| {% if 'z' not in printer.toolhead.homed_axes %} | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% endif %} | |
| [gcode_macro _PRE_PROBE_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| {% set BRUSHED = printer["gcode_macro _TAP_VARIABLES"].brushed %} | |
| {% if BRUSHED == 1 %} | |
| _PROBE_TEMP_CHECK | |
| {% else %} | |
| NOZZLE_BRUSH | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=1 | |
| _PROBE_TEMP_CHECK | |
| {% endif %} | |
| [gcode_macro _PROBE_TEMP_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| SET_KINEMATICS_LIMIT Z_ACCEL={PROBE_ACCEL} | |
| {% if TARGET_TEMP > PROBE_TEMP %} | |
| { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) } | |
| M109 S{PROBE_TEMP} | |
| {% else %} | |
| {% if ACTUAL_TEMP > MAX_TEMP %} | |
| { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) } | |
| TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={MAX_TEMP} | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _POST_PROBING] | |
| gcode = | |
| SET_KINEMATICS_LIMIT Z_ACCEL={printer["gcode_macro _TAP_SETTINGS"].max_z_accel} | |
| [gcode_macro _POST_PROBE] | |
| gcode = | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro SET_PROBE_TEMP] | |
| gcode = | |
| {% set temp = params.TEMP|int %} | |
| SAVE_VARIABLE VARIABLE=probe_temp VALUE={TEMP} | |
| [gcode_macro Z_TILT_ADJUST] | |
| rename_existing = Z_TILT_ADJUST_REAL | |
| gcode = | |
| Z_TILT_ADJUST_REAL | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro _TAP_SETTINGS] | |
| variable_probe_accel = 15 | |
| variable_home_x = 175 | |
| variable_home_y = 175 | |
| variable_home_speed = 300 | |
| variable_max_z_accel = 500 | |
| gcode = | |
| [mcu] | |
| serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_JKYZ-if00 | |
| [danger_options] | |
| allow_plugin_override = True | |
| [printer] | |
| square_corner_velocity = 5.0 | |
| kinematics = limited_corexy | |
| max_velocity = 564 | |
| max_z_velocity = 100 | |
| max_accel = 10000 | |
| max_x_accel = 9000 | |
| max_y_accel = 8000 | |
| max_z_accel = 500 | |
| scale_xy_accel = True | |
| [thermistor NTC10K] | |
| temperature1 = 0.0 | |
| resistance1 = 32116.0 | |
| temperature2 = 40.0 | |
| resistance2 = 5309.0 | |
| temperature3 = 80.0 | |
| resistance3 = 1228.0 | |
| [stepper_x] | |
| step_pin = PE11 | |
| dir_pin = !PE10 | |
| enable_pin = !PE9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB14 | |
| position_min = 0 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| step_pulse_duration = 0.000004 | |
| [tmc2209 stepper_x] | |
| uart_pin = PE7 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_y] | |
| step_pin = PD8 | |
| dir_pin = PB12 | |
| enable_pin = !PD9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB13 | |
| position_min = 0 | |
| step_pulse_duration = 0.000004 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| [tmc2209 stepper_y] | |
| uart_pin = PE15 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_z] | |
| step_pin = PE2 | |
| dir_pin = PE4 | |
| enable_pin = !PE3 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| endstop_pin = probe:z_virtual_endstop | |
| position_max = 290 | |
| position_min = -5 | |
| homing_speed = 50 | |
| second_homing_speed = 10 | |
| homing_retract_dist = 3 | |
| [tmc2209 stepper_z] | |
| uart_pin = PC14 | |
| uart_address = 0 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z1] | |
| step_pin = PE6 | |
| dir_pin = PC13 | |
| enable_pin = !PE5 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z1] | |
| uart_pin = PA15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z2] | |
| step_pin = PD12 | |
| dir_pin = PC4 | |
| enable_pin = !PE8 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z2] | |
| uart_pin = PC15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [extruder] | |
| step_pin = PD5 | |
| dir_pin = !PD6 | |
| enable_pin = !PD4 | |
| rotation_distance = 21.525 | |
| gear_ratio = 50:10 | |
| microsteps = 16 | |
| full_steps_per_rotation = 200 | |
| nozzle_diameter = 0.600 | |
| filament_diameter = 1.75 | |
| heater_pin = PB15 | |
| sensor_type = PT1000 | |
| sensor_pin = PC0 | |
| min_temp = 10 | |
| max_temp = 315 | |
| max_power = 1.0 | |
| min_extrude_temp = 170 | |
| heater_power = 115 | |
| cooling_fan = fan | |
| ambient_temp_sensor = heater_generic chamber_heater | |
| pressure_advance = 0.05 | |
| pressure_advance_smooth_time = 0.040 | |
| max_extrude_cross_section = 5 | |
| pid_version = 1 | |
| pid_target = 285.00 | |
| pid_tolerance = 0.0200 | |
| pid_kp = 18.086 | |
| pid_ki = 0.536 | |
| pid_kd = 152.599 | |
| control = mpc | |
| block_heat_capacity = 35.4770 | |
| sensor_responsiveness = 0.0640446 | |
| ambient_transfer = 0.188931 | |
| fan_ambient_transfer = 0.188931, 0.232912, 0.268052 | |
| [tmc2209 extruder] | |
| uart_pin = PD7 | |
| interpolate = true | |
| run_current = 0.65 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| [verify_heater extruder] | |
| hysteresis = 15 | |
| heating_gain = 0.5 | |
| check_gain_time = 120 | |
| [heater_bed] | |
| heater_pin = PB4 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PB0 | |
| max_power = 0.8 | |
| min_temp = 5 | |
| max_temp = 170 | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [probe] | |
| pin = !PA3 | |
| x_offset = 0 | |
| y_offset = 0 | |
| speed = 50.0 | |
| samples = 4 | |
| samples_result = median | |
| sample_retract_dist = 3.0 | |
| samples_tolerance = 0.05 | |
| samples_tolerance_retries = 5 | |
| deactivate_on_each_sample = True | |
| activate_gcode = | |
| _PRE_PROBE_CHECK | |
| deactivate_gcode = | |
| _POST_PROBING | |
| z_offset = -1.160 | |
| [heater_fan hotend_fan] | |
| pin = PA13 | |
| max_power = 1.0 | |
| kick_start_time = 0.5 | |
| heater = extruder | |
| heater_temp = 50.0 | |
| fan_speed = 1.0 | |
| [fan] | |
| pin = PA14 | |
| max_power = 0.4 | |
| kick_start_time = 0.5 | |
| off_below = 0.10 | |
| [neopixel my_neopixel] | |
| pin = PD3 | |
| chain_count = 26 | |
| color_order = GRBW | |
| initial_red = 0.2 | |
| initial_green = 0.2 | |
| initial_blue = 0.2 | |
| [idle_timeout] | |
| timeout = 9999999999 | |
| [bed_mesh] | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| mesh_min = 40, 40 | |
| mesh_max = 310,310 | |
| fade_start = 0.6 | |
| fade_end = 10.0 | |
| probe_count = 7,7 | |
| algorithm = bicubic | |
| adaptive_margin = 5 | |
| [z_tilt] | |
| z_positions = | |
| -50, 18 | |
| 150, 348 | |
| 350, 18 | |
| points = | |
| 30, 5 | |
| 175, 295 | |
| 320, 5 | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| retries = 10 | |
| retry_tolerance = 0.007 | |
| [gcode_macro G32] | |
| gcode = | |
| BED_MESH_CLEAR | |
| G28 | |
| Z_TILT_ADJUST | |
| G28 | |
| G0 X175 Y175 Z30 F3600 | |
| [save_variables] | |
| filename = ~/printer_data/config/variables.cfg | |
| [gcode_macro PRINT_START] | |
| gcode = | |
| {% set chamber = printer.extruder.filament.chamber %} | |
| G28 | |
| HEAT_BED_AND_WAIT | |
| SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="z_thermal_adjust" MINIMUM={printer.extruder.filament.chamber + 2} | |
| G28 Z | |
| BED_MESH_CALIBRATE | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| G92 E0 | |
| G90 | |
| HEAT_EXTRUDER_AND_WAIT | |
| LINE_PURGE | |
| [gcode_macro PRINT_END] | |
| gcode = | |
| M400 | |
| G92 E0 | |
| G1 E-1.0 F3600 | |
| G91 | |
| G0 Z1.00 X20.0 Y20.0 F20000 | |
| TURN_OFF_HEATERS | |
| M107 | |
| G90 | |
| G0 X350 Y350 F3600 | |
| [exclude_object] | |
| [gcode_arcs] | |
| resolution = 0.1 | |
| [input_shaper] | |
| enabled_extruders = extruder | |
| smoother_freq_x = 56.6 | |
| shaper_type_x = smooth_ei | |
| smoother_freq_y = 30.8 | |
| shaper_type_y = smooth_ei | |
| [filaments] | |
| on_set_filament_gcode = | |
| M117 add | |
| on_clear_filament_gcode = | |
| M117 clear | |
| [z_thermal_adjust] | |
| temp_coeff = 0.005 | |
| smooth_time = 1 | |
| sensor_type = NTC10K | |
| sensor_pin = PC2 | |
| min_temp = 10 | |
| max_temp = 67 | |
| gcode_id = thermal_adjust | |
| [heater_generic chamber_heater] | |
| heater_pin = PC8 | |
| max_power = 1.0 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PC3 | |
| min_temp = 10 | |
| max_temp = 67 | |
| pid_version = 1 | |
| pid_target = 60.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 64.228 | |
| pid_ki = 0.421 | |
| pid_kd = 2450.039 | |
| [heater_fan chamber_heater_fan] | |
| pin = PB2 | |
| max_power = 1.0 | |
| heater = chamber_heater | |
| heater_temp = 35 | |
| [verify_heater chamber_heater] | |
| hysteresis = 5 | |
| heating_gain = 0.1 | |
| check_gain_time = 480 | |
| [skew_correction] | |
| [pid_profile extruder abs] | |
| pid_version = 1 | |
| pid_target = 260.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 16.100 | |
| pid_ki = 1.058 | |
| pid_kd = 61.259 | |
| [pid_profile heater_bed abs] | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [skew_correction skew] | |
| xy_skew = 0.000 | |
| xz_skew = 0.000 | |
| yz_skew = 0.000 | |
| [pid_profile extruder pc] | |
| pid_version = 1 | |
| pid_target = 250.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 17.627 | |
| pid_ki = 1.013 | |
| pid_kd = 76.678 | |
| [bed_mesh default] | |
| version = 1 | |
| points = | |
| -0.404688, -0.225625, -0.205000, -0.161875 | |
| -0.151250, -0.037188, 0.016562, 0.080312 | |
| 0.073437, 0.069375, 0.125312, 0.193437 | |
| 0.220312, 0.119687, 0.199375, 0.301250 | |
| x_count = 4 | |
| y_count = 4 | |
| mesh_x_pps = 2 | |
| mesh_y_pps = 2 | |
| algo = lagrange | |
| tension = 0.2 | |
| min_x = 109.99 | |
| max_x = 240.52 | |
| min_y = 119.39 | |
| max_y = 230.69 | |
| ======================= | |
| extruder: pressure_advance_model: linear | |
| pressure_advance: 0.039000 | |
| pressure_advance_smooth_time: 0.040000 | |
| pressure_advance_time_offset: 0.000000 | |
| Loaded MCU 'mcu' 105 commands ( v0.10.0-557-gf7e29b27 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-12+11) 2.31.1) | |
| MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1 | |
| Configured MCU 'mcu' (1024 moves) | |
| toolhead: max_velocity: 564.000000 | |
| max_accel: 5500.000000 | |
| minimum_cruise_ratio: 0.500000 | |
| square_corner_velocity: 7.000000 | |
| Args: ['/home/orangepi/klipper/klippy/klippy.py', '/home/orangepi/printer_data/config/printer.cfg', '-I', '/home/orangepi/printer_data/comms/klippy.serial', '-l', '/home/orangepi/printer_data/logs/klippy.log', '-a', '/home/orangepi/printer_data/comms/klippy.sock'] | |
| App Name: Danger-Klipper | |
| Git version: 'v0.12.0-476-g10002c97' | |
| Branch: bleeding-edge-v2 | |
| Remote: origin | |
| Tracked URL: https://github.com/DangerKlippers/danger-klipper | |
| CPU: 4 core ? | |
| Python: '3.11.2 (main, Mar 2 2024, 20:28:50) [GCC 12.2.0]' | |
| webhooks client 547626460560: {'program': 'Moonraker', 'version': 'v0.8.0-354-gba94285'} | |
| =============== Log rollover at Sun Aug 4 00:00:00 2024 =============== | |
| Stats 443630.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000034 bytes_read=8630455 bytes_retransmit=9 bytes_invalid=0 send_seq=440257 receive_seq=440257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003720 heater_bed: target=0 temp=65.2 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.06 cputime=3183.715 memavail=3620368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000 | |
| Stats 443631.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000040 bytes_read=8630677 bytes_retransmit=9 bytes_invalid=0 send_seq=440258 receive_seq=440258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 heater_bed: target=0 temp=65.2 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.06 cputime=3183.742 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000 | |
| Stats 443632.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000046 bytes_read=8630870 bytes_retransmit=9 bytes_invalid=0 send_seq=440259 receive_seq=440259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003656 heater_bed: target=0 temp=65.1 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.06 cputime=3183.767 memavail=3505724 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000 | |
| Stats 443633.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000052 bytes_read=8631107 bytes_retransmit=9 bytes_invalid=0 send_seq=440260 receive_seq=440260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 heater_bed: target=0 temp=65.1 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.06 cputime=3183.788 memavail=3531748 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 443634.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000058 bytes_read=8631329 bytes_retransmit=9 bytes_invalid=0 send_seq=440261 receive_seq=440261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 heater_bed: target=0 temp=65.1 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.29 cputime=3183.813 memavail=3602700 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 443635.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000064 bytes_read=8631522 bytes_retransmit=9 bytes_invalid=0 send_seq=440262 receive_seq=440262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003730 heater_bed: target=0 temp=65.1 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.29 cputime=3183.836 memavail=3602140 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000 | |
| Stats 443636.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000070 bytes_read=8631739 bytes_retransmit=9 bytes_invalid=0 send_seq=440263 receive_seq=440263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 heater_bed: target=0 temp=65.1 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.29 cputime=3183.861 memavail=3603356 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 443637.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000076 bytes_read=8631946 bytes_retransmit=9 bytes_invalid=0 send_seq=440264 receive_seq=440264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003913 heater_bed: target=0 temp=65.0 pwm=0.000 z_thermal_adjust: temp=42.1 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.29 cputime=3183.883 memavail=3594312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000 | |
| Stats 443638.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000082 bytes_read=8632153 bytes_retransmit=9 bytes_invalid=0 send_seq=440265 receive_seq=440265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003855 heater_bed: target=0 temp=65.0 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.29 cputime=3183.904 memavail=3580104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000 | |
| Stats 443639.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000088 bytes_read=8632391 bytes_retransmit=9 bytes_invalid=0 send_seq=440266 receive_seq=440266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 heater_bed: target=0 temp=65.0 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.43 cputime=3183.926 memavail=3572140 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000 | |
| Stats 443640.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000094 bytes_read=8632598 bytes_retransmit=9 bytes_invalid=0 send_seq=440267 receive_seq=440267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=65.0 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.43 cputime=3183.948 memavail=3572036 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000 | |
| Stats 443641.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000100 bytes_read=8632791 bytes_retransmit=9 bytes_invalid=0 send_seq=440268 receive_seq=440268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003726 heater_bed: target=0 temp=64.9 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.43 cputime=3183.970 memavail=3563880 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 443642.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000106 bytes_read=8633029 bytes_retransmit=9 bytes_invalid=0 send_seq=440269 receive_seq=440269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=64.9 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.43 cputime=3183.994 memavail=3578872 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000 | |
| Stats 443643.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000112 bytes_read=8633250 bytes_retransmit=9 bytes_invalid=0 send_seq=440270 receive_seq=440270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=64.9 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.43 cputime=3184.016 memavail=3578936 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 443644.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000118 bytes_read=8633443 bytes_retransmit=9 bytes_invalid=0 send_seq=440271 receive_seq=440271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003817 heater_bed: target=0 temp=64.9 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.7 pwm=0.000 sysload=2.55 cputime=3184.037 memavail=3578968 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 443645.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000124 bytes_read=8633681 bytes_retransmit=9 bytes_invalid=0 send_seq=440272 receive_seq=440272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003777 heater_bed: target=0 temp=64.8 pwm=0.000 z_thermal_adjust: temp=42.0 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.55 cputime=3184.059 memavail=3578976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000 | |
| Stats 443646.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000130 bytes_read=8633888 bytes_retransmit=9 bytes_invalid=0 send_seq=440273 receive_seq=440273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003746 heater_bed: target=0 temp=64.8 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.55 cputime=3184.081 memavail=3578904 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000 | |
| Stats 443647.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000136 bytes_read=8634081 bytes_retransmit=9 bytes_invalid=0 send_seq=440274 receive_seq=440274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003745 heater_bed: target=0 temp=64.8 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.55 cputime=3184.103 memavail=3578860 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 443648.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000142 bytes_read=8634333 bytes_retransmit=9 bytes_invalid=0 send_seq=440275 receive_seq=440275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=64.8 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.55 cputime=3184.127 memavail=3578896 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000 | |
| Stats 443649.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000148 bytes_read=8634540 bytes_retransmit=9 bytes_invalid=0 send_seq=440276 receive_seq=440276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003911 heater_bed: target=0 temp=64.7 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.59 cputime=3184.149 memavail=3578996 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000 | |
| Stats 443650.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000154 bytes_read=8634733 bytes_retransmit=9 bytes_invalid=0 send_seq=440277 receive_seq=440277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003929 heater_bed: target=0 temp=64.7 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.59 cputime=3184.170 memavail=3578972 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 443651.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000160 bytes_read=8634971 bytes_retransmit=9 bytes_invalid=0 send_seq=440278 receive_seq=440278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003973 heater_bed: target=0 temp=64.7 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.59 cputime=3184.192 memavail=3578876 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 443652.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000166 bytes_read=8635178 bytes_retransmit=9 bytes_invalid=0 send_seq=440279 receive_seq=440279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003958 heater_bed: target=0 temp=64.6 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.59 cputime=3184.213 memavail=3618704 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 443653.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000172 bytes_read=8635385 bytes_retransmit=9 bytes_invalid=0 send_seq=440280 receive_seq=440280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=64.6 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.59 cputime=3184.234 memavail=3604912 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 443654.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000178 bytes_read=8635623 bytes_retransmit=9 bytes_invalid=0 send_seq=440281 receive_seq=440281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003830 heater_bed: target=0 temp=64.6 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.62 cputime=3184.259 memavail=3604864 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 443655.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000184 bytes_read=8635830 bytes_retransmit=9 bytes_invalid=0 send_seq=440282 receive_seq=440282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003844 heater_bed: target=0 temp=64.6 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.62 cputime=3184.281 memavail=3603344 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000 | |
| Stats 443656.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000190 bytes_read=8636023 bytes_retransmit=9 bytes_invalid=0 send_seq=440283 receive_seq=440283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003822 heater_bed: target=0 temp=64.5 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.62 cputime=3184.303 memavail=3603596 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 443657.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000196 bytes_read=8636261 bytes_retransmit=9 bytes_invalid=0 send_seq=440284 receive_seq=440284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003743 heater_bed: target=0 temp=64.5 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.6 pwm=0.000 sysload=2.62 cputime=3184.326 memavail=3595492 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 443658.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000202 bytes_read=8636482 bytes_retransmit=9 bytes_invalid=0 send_seq=440285 receive_seq=440285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003857 heater_bed: target=0 temp=64.5 pwm=0.000 z_thermal_adjust: temp=41.9 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.62 cputime=3184.348 memavail=3580852 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 443659.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000208 bytes_read=8636675 bytes_retransmit=9 bytes_invalid=0 send_seq=440286 receive_seq=440286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003941 heater_bed: target=0 temp=64.5 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.65 cputime=3184.366 memavail=3580940 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 443660.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000214 bytes_read=8636905 bytes_retransmit=9 bytes_invalid=0 send_seq=440287 receive_seq=440287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004017 heater_bed: target=0 temp=64.5 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.65 cputime=3184.390 memavail=3571596 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 443661.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000220 bytes_read=8637099 bytes_retransmit=9 bytes_invalid=0 send_seq=440288 receive_seq=440288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 heater_bed: target=0 temp=64.4 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.65 cputime=3184.411 memavail=3570460 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000 | |
| Stats 443662.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000226 bytes_read=8637291 bytes_retransmit=9 bytes_invalid=0 send_seq=440289 receive_seq=440289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003913 heater_bed: target=0 temp=64.4 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.65 cputime=3184.432 memavail=3578648 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000 | |
| Stats 443663.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000238 bytes_read=8637559 bytes_retransmit=9 bytes_invalid=0 send_seq=440291 receive_seq=440291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003913 heater_bed: target=0 temp=64.4 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.65 cputime=3184.455 memavail=3578632 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 443664.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000244 bytes_read=8637766 bytes_retransmit=9 bytes_invalid=0 send_seq=440292 receive_seq=440292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=64.4 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.68 cputime=3184.476 memavail=3578652 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 443665.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000250 bytes_read=8637959 bytes_retransmit=9 bytes_invalid=0 send_seq=440293 receive_seq=440293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003893 heater_bed: target=0 temp=64.3 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.68 cputime=3184.496 memavail=3578716 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 443666.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000256 bytes_read=8638197 bytes_retransmit=9 bytes_invalid=0 send_seq=440294 receive_seq=440294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003980 heater_bed: target=0 temp=64.3 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.68 cputime=3184.519 memavail=3578628 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 443667.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000262 bytes_read=8638404 bytes_retransmit=9 bytes_invalid=0 send_seq=440295 receive_seq=440295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003938 heater_bed: target=0 temp=64.3 pwm=0.000 z_thermal_adjust: temp=41.8 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.68 cputime=3184.540 memavail=3578660 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 443668.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000268 bytes_read=8638611 bytes_retransmit=9 bytes_invalid=0 send_seq=440296 receive_seq=440296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004023 heater_bed: target=0 temp=64.3 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.68 cputime=3184.561 memavail=3578740 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 443669.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000274 bytes_read=8638849 bytes_retransmit=9 bytes_invalid=0 send_seq=440297 receive_seq=440297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004031 heater_bed: target=0 temp=64.2 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.79 cputime=3184.583 memavail=3578600 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 443670.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000280 bytes_read=8639056 bytes_retransmit=9 bytes_invalid=0 send_seq=440298 receive_seq=440298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003934 heater_bed: target=0 temp=64.2 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.5 pwm=0.000 sysload=2.79 cputime=3184.604 memavail=3578636 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 443671.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000286 bytes_read=8639249 bytes_retransmit=9 bytes_invalid=0 send_seq=440299 receive_seq=440299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003963 heater_bed: target=0 temp=64.2 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.79 cputime=3184.625 memavail=3578604 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 443672.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000292 bytes_read=8639487 bytes_retransmit=9 bytes_invalid=0 send_seq=440300 receive_seq=440300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003979 heater_bed: target=0 temp=64.1 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.79 cputime=3184.648 memavail=3578608 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 443673.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000298 bytes_read=8639708 bytes_retransmit=9 bytes_invalid=0 send_seq=440301 receive_seq=440301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003996 heater_bed: target=0 temp=64.1 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.79 cputime=3184.669 memavail=3619040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 443674.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000304 bytes_read=8639901 bytes_retransmit=9 bytes_invalid=0 send_seq=440302 receive_seq=440302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004047 heater_bed: target=0 temp=64.1 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.81 cputime=3184.690 memavail=3619068 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 443675.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000310 bytes_read=8640139 bytes_retransmit=9 bytes_invalid=0 send_seq=440303 receive_seq=440303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004130 heater_bed: target=0 temp=64.1 pwm=0.000 z_thermal_adjust: temp=41.7 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.81 cputime=3184.711 memavail=3619040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 443676.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000316 bytes_read=8640346 bytes_retransmit=9 bytes_invalid=0 send_seq=440304 receive_seq=440304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004128 heater_bed: target=0 temp=64.1 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.81 cputime=3184.732 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 443677.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000322 bytes_read=8640539 bytes_retransmit=9 bytes_invalid=0 send_seq=440305 receive_seq=440305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004036 heater_bed: target=0 temp=64.0 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.81 cputime=3184.752 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 443678.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000328 bytes_read=8640791 bytes_retransmit=9 bytes_invalid=0 send_seq=440306 receive_seq=440306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003959 heater_bed: target=0 temp=64.0 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.81 cputime=3184.775 memavail=3619096 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 443679.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000334 bytes_read=8640998 bytes_retransmit=9 bytes_invalid=0 send_seq=440307 receive_seq=440307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=64.0 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.66 cputime=3184.795 memavail=3619140 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000 | |
| Stats 443680.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000340 bytes_read=8641191 bytes_retransmit=9 bytes_invalid=0 send_seq=440308 receive_seq=440308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003844 heater_bed: target=0 temp=64.0 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.66 cputime=3184.815 memavail=3619104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 443681.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000346 bytes_read=8641429 bytes_retransmit=9 bytes_invalid=0 send_seq=440309 receive_seq=440309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003777 heater_bed: target=0 temp=64.0 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.4 pwm=0.000 sysload=2.66 cputime=3184.840 memavail=3619072 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000 | |
| Stats 443682.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000352 bytes_read=8641636 bytes_retransmit=9 bytes_invalid=0 send_seq=440310 receive_seq=440310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003768 heater_bed: target=0 temp=63.9 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.66 cputime=3184.861 memavail=3619072 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000 | |
| Stats 443683.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000358 bytes_read=8641843 bytes_retransmit=9 bytes_invalid=0 send_seq=440311 receive_seq=440311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003873 heater_bed: target=0 temp=63.9 pwm=0.000 z_thermal_adjust: temp=41.6 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.66 cputime=3184.882 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 443684.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000364 bytes_read=8642069 bytes_retransmit=9 bytes_invalid=0 send_seq=440312 receive_seq=440312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003851 heater_bed: target=0 temp=63.9 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.61 cputime=3184.904 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 443685.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000370 bytes_read=8642266 bytes_retransmit=9 bytes_invalid=0 send_seq=440313 receive_seq=440313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003835 heater_bed: target=0 temp=63.9 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.61 cputime=3184.925 memavail=3619120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 443686.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000376 bytes_read=8642459 bytes_retransmit=9 bytes_invalid=0 send_seq=440314 receive_seq=440314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003825 heater_bed: target=0 temp=63.8 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.61 cputime=3184.944 memavail=3619140 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 443687.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000382 bytes_read=8642697 bytes_retransmit=9 bytes_invalid=0 send_seq=440315 receive_seq=440315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003858 heater_bed: target=0 temp=63.8 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.61 cputime=3184.965 memavail=3619072 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 443688.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000388 bytes_read=8642918 bytes_retransmit=9 bytes_invalid=0 send_seq=440316 receive_seq=440316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003911 heater_bed: target=0 temp=63.8 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.61 cputime=3184.990 memavail=3619304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000 | |
| Stats 443689.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000394 bytes_read=8643111 bytes_retransmit=9 bytes_invalid=0 send_seq=440317 receive_seq=440317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003928 heater_bed: target=0 temp=63.7 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.56 cputime=3185.010 memavail=3619144 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 443690.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000400 bytes_read=8643349 bytes_retransmit=9 bytes_invalid=0 send_seq=440318 receive_seq=440318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003947 heater_bed: target=0 temp=63.7 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.56 cputime=3185.032 memavail=3619164 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 443691.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000406 bytes_read=8643556 bytes_retransmit=9 bytes_invalid=0 send_seq=440319 receive_seq=440319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003884 heater_bed: target=0 temp=63.7 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.56 cputime=3185.053 memavail=3619252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 443692.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000412 bytes_read=8643749 bytes_retransmit=9 bytes_invalid=0 send_seq=440320 receive_seq=440320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=63.7 pwm=0.000 z_thermal_adjust: temp=41.5 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.56 cputime=3185.072 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 443693.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000418 bytes_read=8644001 bytes_retransmit=9 bytes_invalid=0 send_seq=440321 receive_seq=440321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003827 heater_bed: target=0 temp=63.7 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.56 cputime=3185.094 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 443694.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000424 bytes_read=8644208 bytes_retransmit=9 bytes_invalid=0 send_seq=440322 receive_seq=440322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003923 heater_bed: target=0 temp=63.6 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.3 pwm=0.000 sysload=2.51 cputime=3185.115 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 443695.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000430 bytes_read=8644416 bytes_retransmit=9 bytes_invalid=0 send_seq=440323 receive_seq=440323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=63.6 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.51 cputime=3185.136 memavail=3618920 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 443696.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000436 bytes_read=8644639 bytes_retransmit=9 bytes_invalid=0 send_seq=440324 receive_seq=440324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=63.6 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.51 cputime=3185.159 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 443697.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000442 bytes_read=8644846 bytes_retransmit=9 bytes_invalid=0 send_seq=440325 receive_seq=440325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003950 heater_bed: target=0 temp=63.6 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.51 cputime=3185.179 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 443698.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000448 bytes_read=8645068 bytes_retransmit=9 bytes_invalid=0 send_seq=440326 receive_seq=440326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003908 heater_bed: target=0 temp=63.5 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.51 cputime=3185.199 memavail=3619056 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000 | |
| Stats 443699.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000454 bytes_read=8645291 bytes_retransmit=9 bytes_invalid=0 send_seq=440327 receive_seq=440327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003963 heater_bed: target=0 temp=63.5 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.47 cputime=3185.219 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 443700.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000460 bytes_read=8645498 bytes_retransmit=9 bytes_invalid=0 send_seq=440328 receive_seq=440328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003897 heater_bed: target=0 temp=63.5 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.47 cputime=3185.240 memavail=3619120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 443701.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000466 bytes_read=8645706 bytes_retransmit=9 bytes_invalid=0 send_seq=440329 receive_seq=440329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003917 heater_bed: target=0 temp=63.5 pwm=0.000 z_thermal_adjust: temp=41.4 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.47 cputime=3185.260 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 443702.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000472 bytes_read=8645929 bytes_retransmit=9 bytes_invalid=0 send_seq=440330 receive_seq=440330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003934 heater_bed: target=0 temp=63.5 pwm=0.000 z_thermal_adjust: temp=41.3 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.47 cputime=3185.282 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 443703.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000478 bytes_read=8646150 bytes_retransmit=9 bytes_invalid=0 send_seq=440331 receive_seq=440331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003960 heater_bed: target=0 temp=63.4 pwm=0.000 z_thermal_adjust: temp=41.3 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.47 cputime=3185.302 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 443704.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000484 bytes_read=8646358 bytes_retransmit=9 bytes_invalid=0 send_seq=440332 receive_seq=440332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003944 heater_bed: target=0 temp=63.4 pwm=0.000 z_thermal_adjust: temp=41.3 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.43 cputime=3185.322 memavail=3619188 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 443705.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000490 bytes_read=8646581 bytes_retransmit=9 bytes_invalid=0 send_seq=440333 receive_seq=440333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003967 heater_bed: target=0 temp=63.4 pwm=0.000 z_thermal_adjust: temp=41.3 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.43 cputime=3185.343 memavail=3619260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 443706.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000496 bytes_read=8646788 bytes_retransmit=9 bytes_invalid=0 send_seq=440334 receive_seq=440334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003986 heater_bed: target=0 temp=63.4 pwm=0.000 z_thermal_adjust: temp=41.3 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.43 cputime=3185.363 memavail=3619124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 443707.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000502 bytes_read=8646996 bytes_retransmit=9 bytes_invalid=0 send_seq=440335 receive_seq=440335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003959 heater_bed: target=0 temp=63.3 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.43 cputime=3185.386 memavail=3619188 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 443708.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000508 bytes_read=8647221 bytes_retransmit=9 bytes_invalid=0 send_seq=440336 receive_seq=440336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004044 heater_bed: target=0 temp=63.3 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.43 cputime=3185.407 memavail=3619204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 443709.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000514 bytes_read=8647419 bytes_retransmit=9 bytes_invalid=0 send_seq=440337 receive_seq=440337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003969 heater_bed: target=0 temp=63.3 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.2 pwm=0.000 sysload=2.32 cputime=3185.427 memavail=3619196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 443710.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000520 bytes_read=8647627 bytes_retransmit=9 bytes_invalid=0 send_seq=440338 receive_seq=440338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004012 heater_bed: target=0 temp=63.3 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.32 cputime=3185.447 memavail=3619352 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 443711.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000526 bytes_read=8647850 bytes_retransmit=9 bytes_invalid=0 send_seq=440339 receive_seq=440339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004008 heater_bed: target=0 temp=63.2 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.32 cputime=3185.468 memavail=3619160 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 443712.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000532 bytes_read=8648057 bytes_retransmit=9 bytes_invalid=0 send_seq=440340 receive_seq=440340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003953 heater_bed: target=0 temp=63.2 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.32 cputime=3185.489 memavail=3619264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 443713.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000538 bytes_read=8648279 bytes_retransmit=9 bytes_invalid=0 send_seq=440341 receive_seq=440341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003876 heater_bed: target=0 temp=63.2 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.32 cputime=3185.509 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 443714.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000544 bytes_read=8648502 bytes_retransmit=9 bytes_invalid=0 send_seq=440342 receive_seq=440342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=63.1 pwm=0.000 z_thermal_adjust: temp=41.2 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.29 cputime=3185.531 memavail=3619256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 443715.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000550 bytes_read=8648709 bytes_retransmit=9 bytes_invalid=0 send_seq=440343 receive_seq=440343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=63.1 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.29 cputime=3185.551 memavail=3619208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 443716.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000556 bytes_read=8648917 bytes_retransmit=9 bytes_invalid=0 send_seq=440344 receive_seq=440344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=63.1 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.29 cputime=3185.572 memavail=3614228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 443717.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000562 bytes_read=8649140 bytes_retransmit=9 bytes_invalid=0 send_seq=440345 receive_seq=440345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003947 heater_bed: target=0 temp=63.1 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.29 cputime=3185.594 memavail=3620200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 443718.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000568 bytes_read=8649361 bytes_retransmit=9 bytes_invalid=0 send_seq=440346 receive_seq=440346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003885 heater_bed: target=0 temp=63.1 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.29 cputime=3185.614 memavail=3620060 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 443719.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000574 bytes_read=8649569 bytes_retransmit=9 bytes_invalid=0 send_seq=440347 receive_seq=440347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003922 heater_bed: target=0 temp=63.0 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.27 cputime=3185.635 memavail=3620060 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 443720.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000580 bytes_read=8649792 bytes_retransmit=9 bytes_invalid=0 send_seq=440348 receive_seq=440348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003836 heater_bed: target=0 temp=63.0 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.27 cputime=3185.658 memavail=3620116 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 443721.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000586 bytes_read=8649999 bytes_retransmit=9 bytes_invalid=0 send_seq=440349 receive_seq=440349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003807 heater_bed: target=0 temp=62.9 pwm=0.000 z_thermal_adjust: temp=41.1 chamber_heater: target=0 temp=40.1 pwm=0.000 sysload=2.27 cputime=3185.678 memavail=3620204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 443722.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000592 bytes_read=8650207 bytes_retransmit=9 bytes_invalid=0 send_seq=440350 receive_seq=440350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003886 heater_bed: target=0 temp=62.9 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.27 cputime=3185.699 memavail=3620068 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 443723.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000598 bytes_read=8650444 bytes_retransmit=9 bytes_invalid=0 send_seq=440351 receive_seq=440351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003807 heater_bed: target=0 temp=62.9 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.27 cputime=3185.720 memavail=3620124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 443724.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000610 bytes_read=8650667 bytes_retransmit=9 bytes_invalid=0 send_seq=440353 receive_seq=440353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=62.8 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.25 cputime=3185.741 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 443725.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000616 bytes_read=8650875 bytes_retransmit=9 bytes_invalid=0 send_seq=440354 receive_seq=440354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003973 heater_bed: target=0 temp=62.8 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.25 cputime=3185.763 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 443726.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000622 bytes_read=8651098 bytes_retransmit=9 bytes_invalid=0 send_seq=440355 receive_seq=440355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003928 heater_bed: target=0 temp=62.8 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.25 cputime=3185.785 memavail=3620140 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 443727.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000628 bytes_read=8651305 bytes_retransmit=9 bytes_invalid=0 send_seq=440356 receive_seq=440356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=62.8 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.25 cputime=3185.805 memavail=3620080 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 443728.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000634 bytes_read=8651527 bytes_retransmit=9 bytes_invalid=0 send_seq=440357 receive_seq=440357 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003939 heater_bed: target=0 temp=62.7 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.25 cputime=3185.825 memavail=3620080 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 443729.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000640 bytes_read=8651750 bytes_retransmit=9 bytes_invalid=0 send_seq=440358 receive_seq=440358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003855 heater_bed: target=0 temp=62.7 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.23 cputime=3185.847 memavail=3620144 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 443730.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000646 bytes_read=8651957 bytes_retransmit=9 bytes_invalid=0 send_seq=440359 receive_seq=440359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003926 heater_bed: target=0 temp=62.7 pwm=0.000 z_thermal_adjust: temp=41.0 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.23 cputime=3185.867 memavail=3620016 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 443731.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000652 bytes_read=8652164 bytes_retransmit=9 bytes_invalid=0 send_seq=440360 receive_seq=440360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003869 heater_bed: target=0 temp=62.7 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=40.0 pwm=0.000 sysload=2.23 cputime=3185.889 memavail=3620008 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 443732.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000658 bytes_read=8652372 bytes_retransmit=9 bytes_invalid=0 send_seq=440361 receive_seq=440361 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=62.6 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.23 cputime=3185.910 memavail=3620112 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 443733.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000664 bytes_read=8652588 bytes_retransmit=9 bytes_invalid=0 send_seq=440362 receive_seq=440362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003908 heater_bed: target=0 temp=62.6 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.23 cputime=3185.931 memavail=3620148 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 443734.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000670 bytes_read=8652796 bytes_retransmit=9 bytes_invalid=0 send_seq=440363 receive_seq=440363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003874 heater_bed: target=0 temp=62.6 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.13 cputime=3185.951 memavail=3620088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 443735.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000676 bytes_read=8653019 bytes_retransmit=9 bytes_invalid=0 send_seq=440364 receive_seq=440364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003898 heater_bed: target=0 temp=62.6 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.13 cputime=3185.972 memavail=3620088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 443736.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000682 bytes_read=8653226 bytes_retransmit=9 bytes_invalid=0 send_seq=440365 receive_seq=440365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=62.5 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.13 cputime=3185.993 memavail=3620176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 443737.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000688 bytes_read=8653434 bytes_retransmit=9 bytes_invalid=0 send_seq=440366 receive_seq=440366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003893 heater_bed: target=0 temp=62.5 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.13 cputime=3186.013 memavail=3620088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 443738.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000694 bytes_read=8653685 bytes_retransmit=9 bytes_invalid=0 send_seq=440367 receive_seq=440367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003997 heater_bed: target=0 temp=62.5 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.13 cputime=3186.035 memavail=3620072 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 443739.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000700 bytes_read=8653878 bytes_retransmit=9 bytes_invalid=0 send_seq=440368 receive_seq=440368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003920 heater_bed: target=0 temp=62.5 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.04 cputime=3186.055 memavail=3620088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 443740.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000706 bytes_read=8654086 bytes_retransmit=9 bytes_invalid=0 send_seq=440369 receive_seq=440369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003979 heater_bed: target=0 temp=62.5 pwm=0.000 z_thermal_adjust: temp=40.9 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.04 cputime=3186.075 memavail=3620104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 443741.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000712 bytes_read=8654323 bytes_retransmit=9 bytes_invalid=0 send_seq=440370 receive_seq=440370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003940 heater_bed: target=0 temp=62.4 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.04 cputime=3186.096 memavail=3620152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 443742.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000718 bytes_read=8654516 bytes_retransmit=9 bytes_invalid=0 send_seq=440371 receive_seq=440371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003941 heater_bed: target=0 temp=62.4 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.9 pwm=0.000 sysload=2.04 cputime=3186.116 memavail=3620008 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 443743.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000724 bytes_read=8654738 bytes_retransmit=9 bytes_invalid=0 send_seq=440372 receive_seq=440372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=62.4 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.04 cputime=3186.136 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 443744.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000730 bytes_read=8654975 bytes_retransmit=9 bytes_invalid=0 send_seq=440373 receive_seq=440373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003922 heater_bed: target=0 temp=62.3 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.159 memavail=3620104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 443745.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000736 bytes_read=8655168 bytes_retransmit=9 bytes_invalid=0 send_seq=440374 receive_seq=440374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 heater_bed: target=0 temp=62.3 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.178 memavail=3620104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 443746.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000742 bytes_read=8655376 bytes_retransmit=9 bytes_invalid=0 send_seq=440375 receive_seq=440375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003933 heater_bed: target=0 temp=62.3 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.199 memavail=3620120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 443747.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000748 bytes_read=8655613 bytes_retransmit=9 bytes_invalid=0 send_seq=440376 receive_seq=440376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003895 heater_bed: target=0 temp=62.3 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.221 memavail=3620040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 443748.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000754 bytes_read=8655820 bytes_retransmit=9 bytes_invalid=0 send_seq=440377 receive_seq=440377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=62.3 pwm=0.000 z_thermal_adjust: temp=40.8 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.241 memavail=3620000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 443749.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000760 bytes_read=8656043 bytes_retransmit=9 bytes_invalid=0 send_seq=440378 receive_seq=440378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004030 heater_bed: target=0 temp=62.2 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.263 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 443750.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000766 bytes_read=8656265 bytes_retransmit=9 bytes_invalid=0 send_seq=440379 receive_seq=440379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004072 heater_bed: target=0 temp=62.2 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.284 memavail=3620160 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 443751.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000772 bytes_read=8656458 bytes_retransmit=9 bytes_invalid=0 send_seq=440380 receive_seq=440380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004065 heater_bed: target=0 temp=62.2 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.302 memavail=3620256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 443752.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000778 bytes_read=8656681 bytes_retransmit=9 bytes_invalid=0 send_seq=440381 receive_seq=440381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004112 heater_bed: target=0 temp=62.2 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.323 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 443753.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000784 bytes_read=8656917 bytes_retransmit=9 bytes_invalid=0 send_seq=440382 receive_seq=440382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004108 heater_bed: target=0 temp=62.2 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.8 pwm=0.000 sysload=2.03 cputime=3186.344 memavail=3620344 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 443754.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000790 bytes_read=8657110 bytes_retransmit=9 bytes_invalid=0 send_seq=440383 receive_seq=440383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=62.1 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.364 memavail=3620256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 443755.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000796 bytes_read=8657330 bytes_retransmit=9 bytes_invalid=0 send_seq=440384 receive_seq=440384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=62.1 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.386 memavail=3620068 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 443756.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000802 bytes_read=8657537 bytes_retransmit=9 bytes_invalid=0 send_seq=440385 receive_seq=440385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003896 heater_bed: target=0 temp=62.1 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.407 memavail=3620188 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 443757.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000808 bytes_read=8657726 bytes_retransmit=9 bytes_invalid=0 send_seq=440386 receive_seq=440386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003943 heater_bed: target=0 temp=62.1 pwm=0.000 z_thermal_adjust: temp=40.7 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.427 memavail=3620372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 443758.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000814 bytes_read=8657963 bytes_retransmit=9 bytes_invalid=0 send_seq=440387 receive_seq=440387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003936 heater_bed: target=0 temp=62.1 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=2.03 cputime=3186.448 memavail=3620136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 443759.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000820 bytes_read=8658185 bytes_retransmit=9 bytes_invalid=0 send_seq=440388 receive_seq=440388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004014 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=1.95 cputime=3186.469 memavail=3620104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 443760.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000826 bytes_read=8658378 bytes_retransmit=9 bytes_invalid=0 send_seq=440389 receive_seq=440389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004033 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=1.95 cputime=3186.490 memavail=3620152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 443761.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000832 bytes_read=8658616 bytes_retransmit=9 bytes_invalid=0 send_seq=440390 receive_seq=440390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004010 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=1.95 cputime=3186.513 memavail=3620224 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 443762.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000838 bytes_read=8658823 bytes_retransmit=9 bytes_invalid=0 send_seq=440391 receive_seq=440391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003965 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.7 pwm=0.000 sysload=1.95 cputime=3186.535 memavail=3620120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 443763.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000844 bytes_read=8659030 bytes_retransmit=9 bytes_invalid=0 send_seq=440392 receive_seq=440392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004048 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.6 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.95 cputime=3186.555 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.1 pwm=0.000 | |
| Stats 443764.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000850 bytes_read=8659268 bytes_retransmit=9 bytes_invalid=0 send_seq=440393 receive_seq=440393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004028 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.87 cputime=3186.577 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 443765.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000856 bytes_read=8659475 bytes_retransmit=9 bytes_invalid=0 send_seq=440394 receive_seq=440394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003985 heater_bed: target=0 temp=62.0 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.87 cputime=3186.598 memavail=3620092 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 443766.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000862 bytes_read=8659668 bytes_retransmit=9 bytes_invalid=0 send_seq=440395 receive_seq=440395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003953 heater_bed: target=0 temp=61.9 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.87 cputime=3186.618 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000 | |
| Stats 443767.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000868 bytes_read=8659906 bytes_retransmit=9 bytes_invalid=0 send_seq=440396 receive_seq=440396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003954 heater_bed: target=0 temp=61.9 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.87 cputime=3186.640 memavail=3620240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.1 pwm=0.000 | |
| Stats 443768.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000874 bytes_read=8660127 bytes_retransmit=9 bytes_invalid=0 send_seq=440397 receive_seq=440397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004037 heater_bed: target=0 temp=61.9 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.87 cputime=3186.662 memavail=3620224 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443769.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000880 bytes_read=8660320 bytes_retransmit=9 bytes_invalid=0 send_seq=440398 receive_seq=440398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003960 heater_bed: target=0 temp=61.9 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.80 cputime=3186.682 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000 | |
| Stats 443770.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000886 bytes_read=8660558 bytes_retransmit=9 bytes_invalid=0 send_seq=440399 receive_seq=440399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003928 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.5 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.80 cputime=3186.704 memavail=3620176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443771.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000892 bytes_read=8660765 bytes_retransmit=9 bytes_invalid=0 send_seq=440400 receive_seq=440400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003846 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.80 cputime=3186.724 memavail=3620176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443772.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000898 bytes_read=8660958 bytes_retransmit=9 bytes_invalid=0 send_seq=440401 receive_seq=440401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003778 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.80 cputime=3186.745 memavail=3620132 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443773.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000904 bytes_read=8661210 bytes_retransmit=9 bytes_invalid=0 send_seq=440402 receive_seq=440402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003769 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.80 cputime=3186.766 memavail=3620300 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000 | |
| Stats 443774.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000910 bytes_read=8661417 bytes_retransmit=9 bytes_invalid=0 send_seq=440403 receive_seq=440403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.74 cputime=3186.787 memavail=3620180 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000 | |
| Stats 443775.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000916 bytes_read=8661610 bytes_retransmit=9 bytes_invalid=0 send_seq=440404 receive_seq=440404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=61.8 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.6 pwm=0.000 sysload=1.74 cputime=3186.806 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443776.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000922 bytes_read=8661848 bytes_retransmit=9 bytes_invalid=0 send_seq=440405 receive_seq=440405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004008 heater_bed: target=0 temp=61.7 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.74 cputime=3186.827 memavail=3620156 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443777.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000928 bytes_read=8662055 bytes_retransmit=9 bytes_invalid=0 send_seq=440406 receive_seq=440406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004041 heater_bed: target=0 temp=61.7 pwm=0.000 z_thermal_adjust: temp=40.4 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.74 cputime=3186.847 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000 | |
| Stats 443778.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000934 bytes_read=8662262 bytes_retransmit=9 bytes_invalid=0 send_seq=440407 receive_seq=440407 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004075 heater_bed: target=0 temp=61.7 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.74 cputime=3186.865 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000 | |
| Stats 443779.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000940 bytes_read=8662492 bytes_retransmit=9 bytes_invalid=0 send_seq=440408 receive_seq=440408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004104 heater_bed: target=0 temp=61.7 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.76 cputime=3186.886 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000 | |
| Stats 443780.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000946 bytes_read=8662685 bytes_retransmit=9 bytes_invalid=0 send_seq=440409 receive_seq=440409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004009 heater_bed: target=0 temp=61.6 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.76 cputime=3186.907 memavail=3620204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443781.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000952 bytes_read=8662877 bytes_retransmit=9 bytes_invalid=0 send_seq=440410 receive_seq=440410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004108 heater_bed: target=0 temp=61.6 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.76 cputime=3186.927 memavail=3620196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443782.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000958 bytes_read=8663115 bytes_retransmit=9 bytes_invalid=0 send_seq=440411 receive_seq=440411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=61.6 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.76 cputime=3186.948 memavail=3620204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000 | |
| Stats 443783.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000964 bytes_read=8663336 bytes_retransmit=9 bytes_invalid=0 send_seq=440412 receive_seq=440412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003959 heater_bed: target=0 temp=61.6 pwm=0.000 z_thermal_adjust: temp=40.3 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.76 cputime=3186.969 memavail=3620132 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443784.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000970 bytes_read=8663529 bytes_retransmit=9 bytes_invalid=0 send_seq=440413 receive_seq=440413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=61.5 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.78 cputime=3186.988 memavail=3620212 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443785.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000982 bytes_read=8663767 bytes_retransmit=9 bytes_invalid=0 send_seq=440415 receive_seq=440414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004073 heater_bed: target=0 temp=61.5 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.78 cputime=3187.011 memavail=3620044 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443786.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000988 bytes_read=8663990 bytes_retransmit=9 bytes_invalid=0 send_seq=440416 receive_seq=440416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004055 heater_bed: target=0 temp=61.5 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.78 cputime=3187.032 memavail=3620212 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000 | |
| Stats 443787.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18000994 bytes_read=8664183 bytes_retransmit=9 bytes_invalid=0 send_seq=440417 receive_seq=440417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004004 heater_bed: target=0 temp=61.5 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.5 pwm=0.000 sysload=1.78 cputime=3187.052 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000 | |
| Stats 443788.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001000 bytes_read=8664435 bytes_retransmit=9 bytes_invalid=0 send_seq=440418 receive_seq=440418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003980 heater_bed: target=0 temp=61.5 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.78 cputime=3187.081 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000 | |
| Stats 443789.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001006 bytes_read=8664642 bytes_retransmit=9 bytes_invalid=0 send_seq=440419 receive_seq=440419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 heater_bed: target=0 temp=61.4 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.71 cputime=3187.101 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000 | |
| Stats 443790.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001012 bytes_read=8664835 bytes_retransmit=9 bytes_invalid=0 send_seq=440420 receive_seq=440420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003932 heater_bed: target=0 temp=61.4 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.71 cputime=3187.121 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000 | |
| Stats 443791.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001018 bytes_read=8665073 bytes_retransmit=9 bytes_invalid=0 send_seq=440421 receive_seq=440421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003969 heater_bed: target=0 temp=61.4 pwm=0.000 z_thermal_adjust: temp=40.2 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.71 cputime=3187.142 memavail=3620168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000 | |
| Stats 443792.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001024 bytes_read=8665280 bytes_retransmit=9 bytes_invalid=0 send_seq=440422 receive_seq=440422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=61.4 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.71 cputime=3187.163 memavail=3620088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000 | |
| Stats 443793.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001030 bytes_read=8665487 bytes_retransmit=9 bytes_invalid=0 send_seq=440423 receive_seq=440423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004018 heater_bed: target=0 temp=61.4 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.4 pwm=0.000 sysload=1.71 cputime=3187.183 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000 | |
| Stats 443794.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001036 bytes_read=8665725 bytes_retransmit=9 bytes_invalid=0 send_seq=440424 receive_seq=440424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003969 heater_bed: target=0 temp=61.3 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.66 cputime=3187.204 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000 | |
| Stats 443795.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001042 bytes_read=8665932 bytes_retransmit=9 bytes_invalid=0 send_seq=440425 receive_seq=440425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004056 heater_bed: target=0 temp=61.3 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.66 cputime=3187.225 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443796.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001048 bytes_read=8666125 bytes_retransmit=9 bytes_invalid=0 send_seq=440426 receive_seq=440426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004105 heater_bed: target=0 temp=61.3 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.66 cputime=3187.245 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443797.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001054 bytes_read=8666363 bytes_retransmit=9 bytes_invalid=0 send_seq=440427 receive_seq=440427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004130 heater_bed: target=0 temp=61.3 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.66 cputime=3187.267 memavail=3620260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443798.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001060 bytes_read=8666584 bytes_retransmit=9 bytes_invalid=0 send_seq=440428 receive_seq=440428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004112 heater_bed: target=0 temp=61.3 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.66 cputime=3187.288 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443799.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001066 bytes_read=8666777 bytes_retransmit=9 bytes_invalid=0 send_seq=440429 receive_seq=440429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004126 heater_bed: target=0 temp=61.2 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.60 cputime=3187.308 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443800.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001072 bytes_read=8667015 bytes_retransmit=9 bytes_invalid=0 send_seq=440430 receive_seq=440430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004089 heater_bed: target=0 temp=61.2 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.60 cputime=3187.329 memavail=3620260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443801.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001078 bytes_read=8667222 bytes_retransmit=9 bytes_invalid=0 send_seq=440431 receive_seq=440431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004012 heater_bed: target=0 temp=61.2 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.60 cputime=3187.350 memavail=3620260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443802.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001084 bytes_read=8667415 bytes_retransmit=9 bytes_invalid=0 send_seq=440432 receive_seq=440432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003983 heater_bed: target=0 temp=61.2 pwm=0.000 z_thermal_adjust: temp=40.1 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.60 cputime=3187.370 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443803.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001090 bytes_read=8667660 bytes_retransmit=9 bytes_invalid=0 send_seq=440433 receive_seq=440433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=61.1 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.60 cputime=3187.393 memavail=3620136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000 | |
| Stats 443804.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001096 bytes_read=8667854 bytes_retransmit=9 bytes_invalid=0 send_seq=440434 receive_seq=440434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003969 heater_bed: target=0 temp=61.1 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.72 cputime=3187.414 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000 | |
| Stats 443805.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001102 bytes_read=8668047 bytes_retransmit=9 bytes_invalid=0 send_seq=440435 receive_seq=440435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003927 heater_bed: target=0 temp=61.1 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.72 cputime=3187.434 memavail=3620160 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443806.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001108 bytes_read=8668285 bytes_retransmit=9 bytes_invalid=0 send_seq=440436 receive_seq=440436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003922 heater_bed: target=0 temp=61.1 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.72 cputime=3187.455 memavail=3620208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443807.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001114 bytes_read=8668492 bytes_retransmit=9 bytes_invalid=0 send_seq=440437 receive_seq=440437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003899 heater_bed: target=0 temp=61.1 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.3 pwm=0.000 sysload=1.72 cputime=3187.476 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000 | |
| Stats 443808.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001120 bytes_read=8668699 bytes_retransmit=9 bytes_invalid=0 send_seq=440438 receive_seq=440438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003845 heater_bed: target=0 temp=61.0 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.72 cputime=3187.497 memavail=3620280 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000 | |
| Stats 443809.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001126 bytes_read=8668937 bytes_retransmit=9 bytes_invalid=0 send_seq=440439 receive_seq=440439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003823 heater_bed: target=0 temp=61.0 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.82 cputime=3187.520 memavail=3620208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000 | |
| Stats 443810.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001132 bytes_read=8669144 bytes_retransmit=9 bytes_invalid=0 send_seq=440440 receive_seq=440440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=61.0 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.82 cputime=3187.541 memavail=3620364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000 | |
| Stats 443811.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001138 bytes_read=8669337 bytes_retransmit=9 bytes_invalid=0 send_seq=440441 receive_seq=440441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003891 heater_bed: target=0 temp=61.0 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.82 cputime=3187.561 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000 | |
| Stats 443812.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001144 bytes_read=8669575 bytes_retransmit=9 bytes_invalid=0 send_seq=440442 receive_seq=440442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003968 heater_bed: target=0 temp=60.9 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.82 cputime=3187.586 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000 | |
| Stats 443813.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001150 bytes_read=8669796 bytes_retransmit=9 bytes_invalid=0 send_seq=440443 receive_seq=440443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003877 heater_bed: target=0 temp=60.9 pwm=0.000 z_thermal_adjust: temp=40.0 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.82 cputime=3187.606 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000 | |
| Stats 443814.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001156 bytes_read=8669989 bytes_retransmit=9 bytes_invalid=0 send_seq=440444 receive_seq=440444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003853 heater_bed: target=0 temp=60.9 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.2 pwm=0.000 sysload=1.83 cputime=3187.626 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000 | |
| Stats 443815.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001162 bytes_read=8670227 bytes_retransmit=9 bytes_invalid=0 send_seq=440445 receive_seq=440445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 heater_bed: target=0 temp=60.9 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.83 cputime=3187.648 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000 | |
| Stats 443816.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001168 bytes_read=8670434 bytes_retransmit=9 bytes_invalid=0 send_seq=440446 receive_seq=440446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003791 heater_bed: target=0 temp=60.8 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.83 cputime=3187.669 memavail=3620288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000 | |
| Stats 443817.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001174 bytes_read=8670627 bytes_retransmit=9 bytes_invalid=0 send_seq=440447 receive_seq=440447 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003811 heater_bed: target=0 temp=60.8 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.83 cputime=3187.689 memavail=3620192 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443818.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001180 bytes_read=8670879 bytes_retransmit=9 bytes_invalid=0 send_seq=440448 receive_seq=440448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003856 heater_bed: target=0 temp=60.8 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.83 cputime=3187.710 memavail=3620152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000 | |
| Stats 443819.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001186 bytes_read=8671086 bytes_retransmit=9 bytes_invalid=0 send_seq=440449 receive_seq=440449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=60.8 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.85 cputime=3187.730 memavail=3620296 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443820.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001192 bytes_read=8671294 bytes_retransmit=9 bytes_invalid=0 send_seq=440450 receive_seq=440450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003755 heater_bed: target=0 temp=60.7 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.85 cputime=3187.751 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443821.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001198 bytes_read=8671517 bytes_retransmit=9 bytes_invalid=0 send_seq=440451 receive_seq=440451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003700 heater_bed: target=0 temp=60.7 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.85 cputime=3187.772 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443822.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001204 bytes_read=8671724 bytes_retransmit=9 bytes_invalid=0 send_seq=440452 receive_seq=440452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003789 heater_bed: target=0 temp=60.7 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.85 cputime=3187.792 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443823.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001210 bytes_read=8671946 bytes_retransmit=9 bytes_invalid=0 send_seq=440453 receive_seq=440453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003807 heater_bed: target=0 temp=60.6 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.85 cputime=3187.813 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443824.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001216 bytes_read=8672169 bytes_retransmit=9 bytes_invalid=0 send_seq=440454 receive_seq=440454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003798 heater_bed: target=0 temp=60.6 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.94 cputime=3187.838 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443825.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001222 bytes_read=8672376 bytes_retransmit=9 bytes_invalid=0 send_seq=440455 receive_seq=440455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=60.6 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.94 cputime=3187.858 memavail=3620356 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000 | |
| Stats 443826.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001228 bytes_read=8672584 bytes_retransmit=9 bytes_invalid=0 send_seq=440456 receive_seq=440456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003965 heater_bed: target=0 temp=60.6 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.94 cputime=3187.878 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000 | |
| Stats 443827.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001234 bytes_read=8672796 bytes_retransmit=9 bytes_invalid=0 send_seq=440457 receive_seq=440457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004028 heater_bed: target=0 temp=60.6 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.94 cputime=3187.900 memavail=3620252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000 | |
| Stats 443828.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001240 bytes_read=8673007 bytes_retransmit=9 bytes_invalid=0 send_seq=440458 receive_seq=440458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003942 heater_bed: target=0 temp=60.5 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.94 cputime=3187.921 memavail=3620444 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000 | |
| Stats 443829.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001246 bytes_read=8673215 bytes_retransmit=9 bytes_invalid=0 send_seq=440459 receive_seq=440459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003910 heater_bed: target=0 temp=60.5 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.86 cputime=3187.941 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000 | |
| Stats 443830.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001252 bytes_read=8673438 bytes_retransmit=9 bytes_invalid=0 send_seq=440460 receive_seq=440460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003932 heater_bed: target=0 temp=60.5 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.86 cputime=3187.964 memavail=3620332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000 | |
| Stats 443831.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001258 bytes_read=8673645 bytes_retransmit=9 bytes_invalid=0 send_seq=440461 receive_seq=440461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=60.5 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.86 cputime=3187.992 memavail=3620388 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000 | |
| Stats 443832.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001264 bytes_read=8673853 bytes_retransmit=9 bytes_invalid=0 send_seq=440462 receive_seq=440462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003948 heater_bed: target=0 temp=60.4 pwm=0.000 z_thermal_adjust: temp=39.9 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.86 cputime=3188.012 memavail=3620332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443833.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001270 bytes_read=8674090 bytes_retransmit=9 bytes_invalid=0 send_seq=440463 receive_seq=440463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003953 heater_bed: target=0 temp=60.4 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.86 cputime=3188.034 memavail=3620332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000 | |
| Stats 443834.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001276 bytes_read=8674297 bytes_retransmit=9 bytes_invalid=0 send_seq=440464 receive_seq=440464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=60.4 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.79 cputime=3188.054 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000 | |
| Stats 443835.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001282 bytes_read=8674505 bytes_retransmit=9 bytes_invalid=0 send_seq=440465 receive_seq=440465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004032 heater_bed: target=0 temp=60.4 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.79 cputime=3188.076 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443836.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001288 bytes_read=8674728 bytes_retransmit=9 bytes_invalid=0 send_seq=440466 receive_seq=440466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004033 heater_bed: target=0 temp=60.3 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.1 pwm=0.000 sysload=1.79 cputime=3188.096 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443837.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001294 bytes_read=8674935 bytes_retransmit=9 bytes_invalid=0 send_seq=440467 receive_seq=440467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003966 heater_bed: target=0 temp=60.3 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.79 cputime=3188.117 memavail=3620068 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443838.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001300 bytes_read=8675157 bytes_retransmit=9 bytes_invalid=0 send_seq=440468 receive_seq=440468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004053 heater_bed: target=0 temp=60.3 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.79 cputime=3188.137 memavail=3620256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443839.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001306 bytes_read=8675380 bytes_retransmit=9 bytes_invalid=0 send_seq=440469 receive_seq=440469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003975 heater_bed: target=0 temp=60.3 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.81 cputime=3188.158 memavail=3620208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000 | |
| Stats 443840.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001312 bytes_read=8675587 bytes_retransmit=9 bytes_invalid=0 send_seq=440470 receive_seq=440470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003892 heater_bed: target=0 temp=60.3 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.81 cputime=3188.179 memavail=3620224 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000 | |
| Stats 443841.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001318 bytes_read=8675795 bytes_retransmit=9 bytes_invalid=0 send_seq=440471 receive_seq=440471 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003931 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.81 cputime=3188.200 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000 | |
| Stats 443842.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001324 bytes_read=8676018 bytes_retransmit=9 bytes_invalid=0 send_seq=440472 receive_seq=440472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003909 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.81 cputime=3188.220 memavail=3620228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000 | |
| Stats 443843.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001330 bytes_read=8676239 bytes_retransmit=9 bytes_invalid=0 send_seq=440473 receive_seq=440473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003826 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.8 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.81 cputime=3188.239 memavail=3620228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000 | |
| Stats 443844.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001336 bytes_read=8676447 bytes_retransmit=9 bytes_invalid=0 send_seq=440474 receive_seq=440474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003784 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.75 cputime=3188.259 memavail=3620228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000 | |
| Stats 443845.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001342 bytes_read=8676670 bytes_retransmit=9 bytes_invalid=0 send_seq=440475 receive_seq=440475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003784 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.75 cputime=3188.280 memavail=3620164 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000 | |
| Stats 443846.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001348 bytes_read=8676877 bytes_retransmit=9 bytes_invalid=0 send_seq=440476 receive_seq=440476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.75 cputime=3188.301 memavail=3620100 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000 | |
| Stats 443847.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001360 bytes_read=8677101 bytes_retransmit=9 bytes_invalid=0 send_seq=440478 receive_seq=440478 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003981 heater_bed: target=0 temp=60.2 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.75 cputime=3188.322 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000 | |
| Stats 443848.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001366 bytes_read=8677338 bytes_retransmit=9 bytes_invalid=0 send_seq=440479 receive_seq=440479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003979 heater_bed: target=0 temp=60.1 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.75 cputime=3188.343 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000 | |
| Stats 443849.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001372 bytes_read=8677545 bytes_retransmit=9 bytes_invalid=0 send_seq=440480 receive_seq=440480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004014 heater_bed: target=0 temp=60.1 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.69 cputime=3188.363 memavail=3620236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000 | |
| Stats 443850.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001378 bytes_read=8677753 bytes_retransmit=9 bytes_invalid=0 send_seq=440481 receive_seq=440481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003980 heater_bed: target=0 temp=60.1 pwm=0.000 z_thermal_adjust: temp=39.7 chamber_heater: target=0 temp=39.0 pwm=0.000 sysload=1.69 cputime=3188.383 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000 | |
| Stats 443851.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001384 bytes_read=8677964 bytes_retransmit=9 bytes_invalid=0 send_seq=440482 receive_seq=440482 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004047 heater_bed: target=0 temp=60.1 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.69 cputime=3188.404 memavail=3620196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000 | |
| Stats 443852.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001390 bytes_read=8678161 bytes_retransmit=9 bytes_invalid=0 send_seq=440483 receive_seq=440483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004065 heater_bed: target=0 temp=60.0 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.69 cputime=3188.424 memavail=3620252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443853.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001396 bytes_read=8678369 bytes_retransmit=9 bytes_invalid=0 send_seq=440484 receive_seq=440484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004045 heater_bed: target=0 temp=60.0 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.69 cputime=3188.443 memavail=3620252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000 | |
| Stats 443854.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001402 bytes_read=8678606 bytes_retransmit=9 bytes_invalid=0 send_seq=440485 receive_seq=440485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004143 heater_bed: target=0 temp=60.0 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.63 cputime=3188.463 memavail=3620252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443855.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001408 bytes_read=8678813 bytes_retransmit=9 bytes_invalid=0 send_seq=440486 receive_seq=440486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004177 heater_bed: target=0 temp=60.0 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.63 cputime=3188.487 memavail=3620324 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443856.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001414 bytes_read=8679021 bytes_retransmit=9 bytes_invalid=0 send_seq=440487 receive_seq=440487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004166 heater_bed: target=0 temp=60.0 pwm=0.000 z_thermal_adjust: temp=39.6 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.63 cputime=3188.509 memavail=3620380 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443857.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001420 bytes_read=8679258 bytes_retransmit=9 bytes_invalid=0 send_seq=440488 receive_seq=440488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.63 cputime=3188.532 memavail=3620284 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443858.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001426 bytes_read=8679451 bytes_retransmit=9 bytes_invalid=0 send_seq=440489 receive_seq=440489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.63 cputime=3188.553 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000 | |
| Stats 443859.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001432 bytes_read=8679673 bytes_retransmit=9 bytes_invalid=0 send_seq=440490 receive_seq=440490 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.66 cputime=3188.573 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000 | |
| Stats 443860.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001438 bytes_read=8679910 bytes_retransmit=9 bytes_invalid=0 send_seq=440491 receive_seq=440491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004229 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.9 pwm=0.000 sysload=1.66 cputime=3188.595 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000 | |
| Stats 443861.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001444 bytes_read=8680103 bytes_retransmit=9 bytes_invalid=0 send_seq=440492 receive_seq=440492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004197 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.66 cputime=3188.616 memavail=3620300 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000 | |
| Stats 443862.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001450 bytes_read=8680311 bytes_retransmit=9 bytes_invalid=0 send_seq=440493 receive_seq=440493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.66 cputime=3188.637 memavail=3620324 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000 | |
| Stats 443863.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001456 bytes_read=8680548 bytes_retransmit=9 bytes_invalid=0 send_seq=440494 receive_seq=440494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004267 heater_bed: target=0 temp=59.9 pwm=0.000 z_thermal_adjust: temp=39.5 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.66 cputime=3188.660 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000 | |
| Stats 443864.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001462 bytes_read=8680755 bytes_retransmit=9 bytes_invalid=0 send_seq=440495 receive_seq=440495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004276 heater_bed: target=0 temp=59.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.61 cputime=3188.681 memavail=3620284 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000 | |
| Stats 443865.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001468 bytes_read=8680963 bytes_retransmit=9 bytes_invalid=0 send_seq=440496 receive_seq=440496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004329 heater_bed: target=0 temp=59.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.61 cputime=3188.701 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000 | |
| Stats 443866.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001474 bytes_read=8681200 bytes_retransmit=9 bytes_invalid=0 send_seq=440497 receive_seq=440497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004279 heater_bed: target=0 temp=59.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.61 cputime=3188.722 memavail=3620132 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000 | |
| Stats 443867.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001480 bytes_read=8681393 bytes_retransmit=9 bytes_invalid=0 send_seq=440498 receive_seq=440498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004263 heater_bed: target=0 temp=59.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.61 cputime=3188.742 memavail=3620208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000 | |
| Stats 443868.2: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001486 bytes_read=8681616 bytes_retransmit=9 bytes_invalid=0 send_seq=440499 receive_seq=440499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004287 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.61 cputime=3188.763 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000 | |
| Stats 443869.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001492 bytes_read=8681852 bytes_retransmit=9 bytes_invalid=0 send_seq=440500 receive_seq=440500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004258 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.64 cputime=3188.785 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000 | |
| Stats 443870.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001498 bytes_read=8682045 bytes_retransmit=9 bytes_invalid=0 send_seq=440501 receive_seq=440501 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.64 cputime=3188.806 memavail=3620276 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000 | |
| Stats 443871.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001504 bytes_read=8682268 bytes_retransmit=9 bytes_invalid=0 send_seq=440502 receive_seq=440502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004220 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.8 pwm=0.000 sysload=1.64 cputime=3188.826 memavail=3620204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000 | |
| Stats 443872.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001510 bytes_read=8682490 bytes_retransmit=9 bytes_invalid=0 send_seq=440503 receive_seq=440503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004253 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.64 cputime=3188.848 memavail=3620276 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000 | |
| Stats 443873.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001516 bytes_read=8682683 bytes_retransmit=9 bytes_invalid=0 send_seq=440504 receive_seq=440504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004273 heater_bed: target=0 temp=59.7 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.64 cputime=3188.868 memavail=3620380 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000 | |
| Stats 443874.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001522 bytes_read=8682919 bytes_retransmit=9 bytes_invalid=0 send_seq=440505 receive_seq=440505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004348 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.59 cputime=3188.889 memavail=3620272 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000 | |
| Stats 443875.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001528 bytes_read=8683126 bytes_retransmit=9 bytes_invalid=0 send_seq=440506 receive_seq=440506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004414 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.59 cputime=3188.911 memavail=3620376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000 | |
| Stats 443876.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001534 bytes_read=8683313 bytes_retransmit=9 bytes_invalid=0 send_seq=440507 receive_seq=440507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004414 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.59 cputime=3188.932 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000 | |
| Stats 443877.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001540 bytes_read=8683536 bytes_retransmit=9 bytes_invalid=0 send_seq=440508 receive_seq=440508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004471 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.59 cputime=3188.952 memavail=3620412 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000 | |
| Stats 443878.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001546 bytes_read=8683758 bytes_retransmit=9 bytes_invalid=0 send_seq=440509 receive_seq=440509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004458 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.59 cputime=3188.973 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000 | |
| Stats 443879.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001552 bytes_read=8683965 bytes_retransmit=9 bytes_invalid=0 send_seq=440510 receive_seq=440510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004406 heater_bed: target=0 temp=59.6 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3188.993 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443880.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001558 bytes_read=8684203 bytes_retransmit=9 bytes_invalid=0 send_seq=440511 receive_seq=440511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004368 heater_bed: target=0 temp=59.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.7 pwm=0.000 sysload=1.54 cputime=3189.014 memavail=3620312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000 | |
| Stats 443881.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001564 bytes_read=8684410 bytes_retransmit=9 bytes_invalid=0 send_seq=440512 receive_seq=440512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004281 heater_bed: target=0 temp=59.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.037 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443882.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001570 bytes_read=8684603 bytes_retransmit=9 bytes_invalid=0 send_seq=440513 receive_seq=440513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004303 heater_bed: target=0 temp=59.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.057 memavail=3620312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000 | |
| Stats 443883.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001576 bytes_read=8684841 bytes_retransmit=9 bytes_invalid=0 send_seq=440514 receive_seq=440514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=59.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.079 memavail=3620228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443884.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001582 bytes_read=8685062 bytes_retransmit=9 bytes_invalid=0 send_seq=440515 receive_seq=440515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004192 heater_bed: target=0 temp=59.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.50 cputime=3189.098 memavail=3620432 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443885.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001588 bytes_read=8685255 bytes_retransmit=9 bytes_invalid=0 send_seq=440516 receive_seq=440516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004216 heater_bed: target=0 temp=59.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.50 cputime=3189.119 memavail=3620440 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443886.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001594 bytes_read=8685493 bytes_retransmit=9 bytes_invalid=0 send_seq=440517 receive_seq=440517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004156 heater_bed: target=0 temp=59.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.50 cputime=3189.140 memavail=3620344 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000 | |
| Stats 443887.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001600 bytes_read=8685700 bytes_retransmit=9 bytes_invalid=0 send_seq=440518 receive_seq=440518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004205 heater_bed: target=0 temp=59.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.50 cputime=3189.160 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000 | |
| Stats 443888.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001606 bytes_read=8685893 bytes_retransmit=9 bytes_invalid=0 send_seq=440519 receive_seq=440519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004219 heater_bed: target=0 temp=59.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.50 cputime=3189.180 memavail=3620212 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443889.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001612 bytes_read=8686145 bytes_retransmit=9 bytes_invalid=0 send_seq=440520 receive_seq=440520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004175 heater_bed: target=0 temp=59.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.201 memavail=3620364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000 | |
| Stats 443890.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001618 bytes_read=8686352 bytes_retransmit=9 bytes_invalid=0 send_seq=440521 receive_seq=440521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004178 heater_bed: target=0 temp=59.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.222 memavail=3620148 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000 | |
| Stats 443891.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001624 bytes_read=8686545 bytes_retransmit=9 bytes_invalid=0 send_seq=440522 receive_seq=440522 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004070 heater_bed: target=0 temp=59.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.242 memavail=3620092 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000 | |
| Stats 443892.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001630 bytes_read=8686783 bytes_retransmit=9 bytes_invalid=0 send_seq=440523 receive_seq=440523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004065 heater_bed: target=0 temp=59.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.263 memavail=3620092 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000 | |
| Stats 443893.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001636 bytes_read=8686990 bytes_retransmit=9 bytes_invalid=0 send_seq=440524 receive_seq=440524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004115 heater_bed: target=0 temp=59.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.54 cputime=3189.284 memavail=3620028 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000 | |
| Stats 443894.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001642 bytes_read=8687197 bytes_retransmit=9 bytes_invalid=0 send_seq=440525 receive_seq=440525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004142 heater_bed: target=0 temp=59.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.49 cputime=3189.305 memavail=3620096 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000 | |
| Stats 443895.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001648 bytes_read=8687435 bytes_retransmit=9 bytes_invalid=0 send_seq=440526 receive_seq=440526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004048 heater_bed: target=0 temp=59.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.49 cputime=3189.326 memavail=3620080 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000 | |
| Stats 443896.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001654 bytes_read=8687642 bytes_retransmit=9 bytes_invalid=0 send_seq=440527 receive_seq=440527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004073 heater_bed: target=0 temp=59.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.6 pwm=0.000 sysload=1.49 cputime=3189.346 memavail=3620096 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000 | |
| Stats 443897.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001660 bytes_read=8687835 bytes_retransmit=9 bytes_invalid=0 send_seq=440528 receive_seq=440528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004027 heater_bed: target=0 temp=59.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.49 cputime=3189.365 memavail=3620096 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000 | |
| Stats 443898.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001666 bytes_read=8688070 bytes_retransmit=9 bytes_invalid=0 send_seq=440529 receive_seq=440529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004073 heater_bed: target=0 temp=59.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.49 cputime=3189.386 memavail=3620096 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000 | |
| Stats 443899.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001672 bytes_read=8688277 bytes_retransmit=9 bytes_invalid=0 send_seq=440530 receive_seq=440530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004043 heater_bed: target=0 temp=59.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.53 cputime=3189.407 memavail=3620104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000 | |
| Stats 443900.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001678 bytes_read=8688465 bytes_retransmit=9 bytes_invalid=0 send_seq=440531 receive_seq=440531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004123 heater_bed: target=0 temp=59.1 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.53 cputime=3189.427 memavail=3620116 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000 | |
| Stats 443901.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001684 bytes_read=8688703 bytes_retransmit=9 bytes_invalid=0 send_seq=440532 receive_seq=440532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004086 heater_bed: target=0 temp=59.1 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.53 cputime=3189.448 memavail=3620240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000 | |
| Stats 443902.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001690 bytes_read=8688910 bytes_retransmit=9 bytes_invalid=0 send_seq=440533 receive_seq=440533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004049 heater_bed: target=0 temp=59.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.53 cputime=3189.469 memavail=3620056 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443903.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001696 bytes_read=8689103 bytes_retransmit=9 bytes_invalid=0 send_seq=440534 receive_seq=440534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003966 heater_bed: target=0 temp=59.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.53 cputime=3189.489 memavail=3620120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443904.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001702 bytes_read=8689355 bytes_retransmit=9 bytes_invalid=0 send_seq=440535 receive_seq=440535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003873 heater_bed: target=0 temp=59.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.5 pwm=0.000 sysload=1.73 cputime=3189.511 memavail=3620120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000 | |
| Stats 443905.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001708 bytes_read=8689562 bytes_retransmit=9 bytes_invalid=0 send_seq=440536 receive_seq=440536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003947 heater_bed: target=0 temp=59.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.73 cputime=3189.531 memavail=3619916 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000 | |
| Stats 443906.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001714 bytes_read=8689755 bytes_retransmit=9 bytes_invalid=0 send_seq=440537 receive_seq=440537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003916 heater_bed: target=0 temp=59.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.73 cputime=3189.551 memavail=3620092 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000 | |
| Stats 443907.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001726 bytes_read=8690009 bytes_retransmit=9 bytes_invalid=0 send_seq=440539 receive_seq=440539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003984 heater_bed: target=0 temp=59.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.73 cputime=3189.571 memavail=3620028 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443908.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001732 bytes_read=8690216 bytes_retransmit=9 bytes_invalid=0 send_seq=440540 receive_seq=440540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003943 heater_bed: target=0 temp=59.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.73 cputime=3189.592 memavail=3620124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443909.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001738 bytes_read=8690423 bytes_retransmit=9 bytes_invalid=0 send_seq=440541 receive_seq=440541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003951 heater_bed: target=0 temp=59.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.75 cputime=3189.612 memavail=3620124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443910.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001744 bytes_read=8690661 bytes_retransmit=9 bytes_invalid=0 send_seq=440542 receive_seq=440542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003926 heater_bed: target=0 temp=58.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.75 cputime=3189.634 memavail=3620124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443911.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001750 bytes_read=8690868 bytes_retransmit=9 bytes_invalid=0 send_seq=440543 receive_seq=440543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=58.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.75 cputime=3189.655 memavail=3620060 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443912.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001756 bytes_read=8691061 bytes_retransmit=9 bytes_invalid=0 send_seq=440544 receive_seq=440544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003861 heater_bed: target=0 temp=58.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.75 cputime=3189.674 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443913.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001762 bytes_read=8691299 bytes_retransmit=9 bytes_invalid=0 send_seq=440545 receive_seq=440545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003965 heater_bed: target=0 temp=58.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.75 cputime=3189.694 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000 | |
| Stats 443914.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001768 bytes_read=8691520 bytes_retransmit=9 bytes_invalid=0 send_seq=440546 receive_seq=440546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004038 heater_bed: target=0 temp=58.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.69 cputime=3189.715 memavail=3620000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000 | |
| Stats 443915.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001774 bytes_read=8691713 bytes_retransmit=9 bytes_invalid=0 send_seq=440547 receive_seq=440547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004017 heater_bed: target=0 temp=58.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.69 cputime=3189.735 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000 | |
| Stats 443916.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001780 bytes_read=8691951 bytes_retransmit=9 bytes_invalid=0 send_seq=440548 receive_seq=440548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003992 heater_bed: target=0 temp=58.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.69 cputime=3189.755 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000 | |
| Stats 443917.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001786 bytes_read=8692158 bytes_retransmit=9 bytes_invalid=0 send_seq=440549 receive_seq=440549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003995 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.69 cputime=3189.776 memavail=3620032 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000 | |
| Stats 443918.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001792 bytes_read=8692351 bytes_retransmit=9 bytes_invalid=0 send_seq=440550 receive_seq=440550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003982 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.69 cputime=3189.796 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000 | |
| Stats 443919.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001798 bytes_read=8692603 bytes_retransmit=9 bytes_invalid=0 send_seq=440551 receive_seq=440551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003887 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.4 pwm=0.000 sysload=1.64 cputime=3189.818 memavail=3620152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000 | |
| Stats 443920.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001804 bytes_read=8692810 bytes_retransmit=9 bytes_invalid=0 send_seq=440552 receive_seq=440552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003869 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.64 cputime=3189.838 memavail=3620112 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000 | |
| Stats 443921.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001810 bytes_read=8693003 bytes_retransmit=9 bytes_invalid=0 send_seq=440553 receive_seq=440553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.64 cputime=3189.858 memavail=3620224 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000 | |
| Stats 443922.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001816 bytes_read=8693236 bytes_retransmit=9 bytes_invalid=0 send_seq=440554 receive_seq=440554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003909 heater_bed: target=0 temp=58.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.64 cputime=3189.879 memavail=3620152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000 | |
| Stats 443923.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001822 bytes_read=8693429 bytes_retransmit=9 bytes_invalid=0 send_seq=440555 receive_seq=440555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003822 heater_bed: target=0 temp=58.6 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.64 cputime=3189.901 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000 | |
| Stats 443924.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001828 bytes_read=8693635 bytes_retransmit=9 bytes_invalid=0 send_seq=440556 receive_seq=440556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003917 heater_bed: target=0 temp=58.6 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.59 cputime=3189.921 memavail=3620300 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000 | |
| Stats 443925.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001834 bytes_read=8693873 bytes_retransmit=9 bytes_invalid=0 send_seq=440557 receive_seq=440557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004001 heater_bed: target=0 temp=58.6 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.59 cputime=3189.941 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000 | |
| Stats 443926.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001840 bytes_read=8694080 bytes_retransmit=9 bytes_invalid=0 send_seq=440558 receive_seq=440558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003935 heater_bed: target=0 temp=58.6 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.59 cputime=3189.962 memavail=3620168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000 | |
| Stats 443927.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001846 bytes_read=8694273 bytes_retransmit=9 bytes_invalid=0 send_seq=440559 receive_seq=440559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=58.6 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.59 cputime=3189.985 memavail=3620064 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000 | |
| Stats 443928.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001852 bytes_read=8694511 bytes_retransmit=9 bytes_invalid=0 send_seq=440560 receive_seq=440560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004026 heater_bed: target=0 temp=58.5 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.59 cputime=3190.006 memavail=3620168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000 | |
| Stats 443929.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001858 bytes_read=8694732 bytes_retransmit=9 bytes_invalid=0 send_seq=440561 receive_seq=440561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004055 heater_bed: target=0 temp=58.5 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.62 cputime=3190.027 memavail=3620168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000 | |
| Stats 443930.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001864 bytes_read=8694925 bytes_retransmit=9 bytes_invalid=0 send_seq=440562 receive_seq=440562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004090 heater_bed: target=0 temp=58.5 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.62 cputime=3190.047 memavail=3619952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000 | |
| Stats 443931.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001870 bytes_read=8695163 bytes_retransmit=9 bytes_invalid=0 send_seq=440563 receive_seq=440563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003992 heater_bed: target=0 temp=58.5 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.62 cputime=3190.068 memavail=3619952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000 | |
| Stats 443932.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001876 bytes_read=8695370 bytes_retransmit=9 bytes_invalid=0 send_seq=440564 receive_seq=440564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003942 heater_bed: target=0 temp=58.5 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.62 cputime=3190.090 memavail=3619952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000 | |
| Stats 443933.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001882 bytes_read=8695563 bytes_retransmit=9 bytes_invalid=0 send_seq=440565 receive_seq=440565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003877 heater_bed: target=0 temp=58.4 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.62 cputime=3190.111 memavail=3619952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000 | |
| Stats 443934.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001888 bytes_read=8695815 bytes_retransmit=9 bytes_invalid=0 send_seq=440566 receive_seq=440566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003985 heater_bed: target=0 temp=58.4 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.57 cputime=3190.133 memavail=3619952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000 | |
| Stats 443935.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001894 bytes_read=8696022 bytes_retransmit=9 bytes_invalid=0 send_seq=440567 receive_seq=440567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004039 heater_bed: target=0 temp=58.4 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.57 cputime=3190.154 memavail=3619896 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000 | |
| Stats 443936.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001900 bytes_read=8696215 bytes_retransmit=9 bytes_invalid=0 send_seq=440568 receive_seq=440568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004135 heater_bed: target=0 temp=58.3 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.57 cputime=3190.174 memavail=3619964 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000 | |
| Stats 443937.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001906 bytes_read=8696453 bytes_retransmit=9 bytes_invalid=0 send_seq=440569 receive_seq=440569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004045 heater_bed: target=0 temp=58.3 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.57 cputime=3190.196 memavail=3620016 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443938.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001912 bytes_read=8696660 bytes_retransmit=9 bytes_invalid=0 send_seq=440570 receive_seq=440570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004009 heater_bed: target=0 temp=58.3 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.57 cputime=3190.215 memavail=3619968 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443939.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001918 bytes_read=8696867 bytes_retransmit=9 bytes_invalid=0 send_seq=440571 receive_seq=440571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=58.3 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.52 cputime=3190.236 memavail=3619928 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443940.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001924 bytes_read=8697105 bytes_retransmit=9 bytes_invalid=0 send_seq=440572 receive_seq=440572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003960 heater_bed: target=0 temp=58.3 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.52 cputime=3190.258 memavail=3619972 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443941.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001930 bytes_read=8697312 bytes_retransmit=9 bytes_invalid=0 send_seq=440573 receive_seq=440573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004010 heater_bed: target=0 temp=58.2 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.52 cputime=3190.279 memavail=3619972 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443942.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001936 bytes_read=8697505 bytes_retransmit=9 bytes_invalid=0 send_seq=440574 receive_seq=440574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=58.2 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.52 cputime=3190.299 memavail=3619976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443943.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001942 bytes_read=8697743 bytes_retransmit=9 bytes_invalid=0 send_seq=440575 receive_seq=440575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003967 heater_bed: target=0 temp=58.2 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.52 cputime=3190.320 memavail=3620040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443944.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001948 bytes_read=8697964 bytes_retransmit=9 bytes_invalid=0 send_seq=440576 receive_seq=440576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003939 heater_bed: target=0 temp=58.2 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.48 cputime=3190.341 memavail=3619976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443945.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001954 bytes_read=8698172 bytes_retransmit=9 bytes_invalid=0 send_seq=440577 receive_seq=440577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003928 heater_bed: target=0 temp=58.1 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.48 cputime=3190.361 memavail=3619936 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000 | |
| Stats 443946.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001960 bytes_read=8698388 bytes_retransmit=9 bytes_invalid=0 send_seq=440578 receive_seq=440578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003859 heater_bed: target=0 temp=58.1 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.48 cputime=3190.382 memavail=3619976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443947.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001966 bytes_read=8698581 bytes_retransmit=9 bytes_invalid=0 send_seq=440579 receive_seq=440579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003939 heater_bed: target=0 temp=58.1 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.48 cputime=3190.403 memavail=3620040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000 | |
| Stats 443948.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001972 bytes_read=8698789 bytes_retransmit=9 bytes_invalid=0 send_seq=440580 receive_seq=440580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003856 heater_bed: target=0 temp=58.0 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.48 cputime=3190.425 memavail=3619992 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000 | |
| Stats 443949.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001978 bytes_read=8699026 bytes_retransmit=9 bytes_invalid=0 send_seq=440581 receive_seq=440581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003875 heater_bed: target=0 temp=58.0 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.68 cputime=3190.446 memavail=3619904 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000 | |
| Stats 443950.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001984 bytes_read=8699233 bytes_retransmit=9 bytes_invalid=0 send_seq=440582 receive_seq=440582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003812 heater_bed: target=0 temp=58.1 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.68 cputime=3190.466 memavail=3619996 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000 | |
| Stats 443951.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001990 bytes_read=8699441 bytes_retransmit=9 bytes_invalid=0 send_seq=440583 receive_seq=440583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003910 heater_bed: target=0 temp=58.0 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.68 cputime=3190.487 memavail=3619996 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000 | |
| Stats 443952.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18001996 bytes_read=8699664 bytes_retransmit=9 bytes_invalid=0 send_seq=440584 receive_seq=440584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003874 heater_bed: target=0 temp=58.0 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.68 cputime=3190.508 memavail=3619996 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.9 pwm=0.000 | |
| Stats 443953.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002015 bytes_read=8699876 bytes_retransmit=9 bytes_invalid=0 send_seq=440586 receive_seq=440586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003809 heater_bed: target=0 temp=58.0 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.68 cputime=3190.529 memavail=3619996 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.9 pwm=0.000 | |
| Stats 443954.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002021 bytes_read=8700098 bytes_retransmit=9 bytes_invalid=0 send_seq=440587 receive_seq=440587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003872 heater_bed: target=0 temp=57.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.3 pwm=0.000 sysload=1.63 cputime=3190.551 memavail=3620000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.7 pwm=0.000 | |
| Stats 443955.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002027 bytes_read=8700321 bytes_retransmit=9 bytes_invalid=0 send_seq=440588 receive_seq=440588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003794 heater_bed: target=0 temp=57.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.63 cputime=3190.572 memavail=3619992 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.7 pwm=0.000 | |
| Stats 443956.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002033 bytes_read=8700528 bytes_retransmit=9 bytes_invalid=0 send_seq=440589 receive_seq=440589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003807 heater_bed: target=0 temp=57.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.63 cputime=3190.592 memavail=3619972 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.5 pwm=0.000 | |
| Stats 443957.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002039 bytes_read=8700736 bytes_retransmit=9 bytes_invalid=0 send_seq=440590 receive_seq=440590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=57.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.63 cputime=3190.612 memavail=3616228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.5 pwm=0.000 | |
| Stats 443958.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002045 bytes_read=8700959 bytes_retransmit=9 bytes_invalid=0 send_seq=440591 receive_seq=440591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003719 heater_bed: target=0 temp=57.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.63 cputime=3190.633 memavail=3620416 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.4 pwm=0.000 | |
| Stats 443959.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002051 bytes_read=8701180 bytes_retransmit=9 bytes_invalid=0 send_seq=440592 receive_seq=440592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.82 cputime=3190.653 memavail=3620352 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.3 pwm=0.000 | |
| Stats 443960.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002057 bytes_read=8701388 bytes_retransmit=9 bytes_invalid=0 send_seq=440593 receive_seq=440593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003659 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.82 cputime=3190.675 memavail=3620512 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.3 pwm=0.000 | |
| Stats 443961.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002063 bytes_read=8701611 bytes_retransmit=9 bytes_invalid=0 send_seq=440594 receive_seq=440594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003731 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.82 cputime=3190.696 memavail=3620384 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.3 pwm=0.000 | |
| Stats 443962.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002069 bytes_read=8701818 bytes_retransmit=9 bytes_invalid=0 send_seq=440595 receive_seq=440595 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003816 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.82 cputime=3190.718 memavail=3620248 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.9 pwm=0.000 | |
| Stats 443963.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002075 bytes_read=8702026 bytes_retransmit=9 bytes_invalid=0 send_seq=440596 receive_seq=440596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003868 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.82 cputime=3190.739 memavail=3620456 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.7 pwm=0.000 | |
| Stats 443964.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002081 bytes_read=8702263 bytes_retransmit=9 bytes_invalid=0 send_seq=440597 receive_seq=440597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003905 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.75 cputime=3190.760 memavail=3620324 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000 | |
| Stats 443965.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002087 bytes_read=8702470 bytes_retransmit=9 bytes_invalid=0 send_seq=440598 receive_seq=440598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003987 heater_bed: target=0 temp=57.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.75 cputime=3190.781 memavail=3620388 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000 | |
| Stats 443966.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002093 bytes_read=8702678 bytes_retransmit=9 bytes_invalid=0 send_seq=440599 receive_seq=440599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004022 heater_bed: target=0 temp=57.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.75 cputime=3190.802 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000 | |
| Stats 443967.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002099 bytes_read=8702901 bytes_retransmit=9 bytes_invalid=0 send_seq=440600 receive_seq=440600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004049 heater_bed: target=0 temp=57.7 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.75 cputime=3190.823 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.5 pwm=0.000 | |
| Stats 443968.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002105 bytes_read=8703108 bytes_retransmit=9 bytes_invalid=0 send_seq=440601 receive_seq=440601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004108 heater_bed: target=0 temp=57.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.75 cputime=3190.843 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000 | |
| Stats 443969.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002117 bytes_read=8703346 bytes_retransmit=9 bytes_invalid=0 send_seq=440603 receive_seq=440603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004150 heater_bed: target=0 temp=57.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.69 cputime=3190.865 memavail=3620532 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000 | |
| Stats 443970.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002123 bytes_read=8703560 bytes_retransmit=9 bytes_invalid=0 send_seq=440604 receive_seq=440604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004176 heater_bed: target=0 temp=57.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.69 cputime=3190.886 memavail=3620404 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000 | |
| Stats 443971.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002129 bytes_read=8703754 bytes_retransmit=9 bytes_invalid=0 send_seq=440605 receive_seq=440605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004240 heater_bed: target=0 temp=57.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.69 cputime=3190.907 memavail=3620276 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000 | |
| Stats 443972.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002135 bytes_read=8703962 bytes_retransmit=9 bytes_invalid=0 send_seq=440606 receive_seq=440606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004299 heater_bed: target=0 temp=57.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.2 pwm=0.000 sysload=1.69 cputime=3190.928 memavail=3620404 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000 | |
| Stats 443973.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002141 bytes_read=8704185 bytes_retransmit=9 bytes_invalid=0 send_seq=440607 receive_seq=440607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004192 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.69 cputime=3190.948 memavail=3620452 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.1 pwm=0.000 | |
| Stats 443974.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002147 bytes_read=8704406 bytes_retransmit=9 bytes_invalid=0 send_seq=440608 receive_seq=440608 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004207 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.64 cputime=3190.968 memavail=3620512 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.9 pwm=0.000 | |
| Stats 443975.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002153 bytes_read=8704614 bytes_retransmit=9 bytes_invalid=0 send_seq=440609 receive_seq=440609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004224 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.64 cputime=3190.989 memavail=3620408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.8 pwm=0.000 | |
| Stats 443976.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002159 bytes_read=8704837 bytes_retransmit=9 bytes_invalid=0 send_seq=440610 receive_seq=440610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004223 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.64 cputime=3191.011 memavail=3620504 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000 | |
| Stats 443977.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002165 bytes_read=8705044 bytes_retransmit=9 bytes_invalid=0 send_seq=440611 receive_seq=440611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004194 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.64 cputime=3191.032 memavail=3620376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000 | |
| Stats 443978.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002171 bytes_read=8705252 bytes_retransmit=9 bytes_invalid=0 send_seq=440612 receive_seq=440612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=57.5 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.64 cputime=3191.053 memavail=3620416 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000 | |
| Stats 443979.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002177 bytes_read=8705489 bytes_retransmit=9 bytes_invalid=0 send_seq=440613 receive_seq=440613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004248 heater_bed: target=0 temp=57.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.58 cputime=3191.074 memavail=3620560 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000 | |
| Stats 443980.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002183 bytes_read=8705696 bytes_retransmit=9 bytes_invalid=0 send_seq=440614 receive_seq=440614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004240 heater_bed: target=0 temp=57.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.58 cputime=3191.095 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.4 pwm=0.000 | |
| Stats 443981.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002189 bytes_read=8705904 bytes_retransmit=9 bytes_invalid=0 send_seq=440615 receive_seq=440615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004145 heater_bed: target=0 temp=57.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.58 cputime=3191.115 memavail=3620164 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000 | |
| Stats 443982.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002195 bytes_read=8706141 bytes_retransmit=9 bytes_invalid=0 send_seq=440616 receive_seq=440616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004170 heater_bed: target=0 temp=57.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.58 cputime=3191.136 memavail=3620172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.2 pwm=0.000 | |
| Stats 443983.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002201 bytes_read=8706334 bytes_retransmit=9 bytes_invalid=0 send_seq=440617 receive_seq=440617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004263 heater_bed: target=0 temp=57.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.58 cputime=3191.158 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.1 pwm=0.000 | |
| Stats 443984.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002207 bytes_read=8706556 bytes_retransmit=9 bytes_invalid=0 send_seq=440618 receive_seq=440618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004244 heater_bed: target=0 temp=57.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.62 cputime=3191.179 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.9 pwm=0.000 | |
| Stats 443985.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002213 bytes_read=8706793 bytes_retransmit=9 bytes_invalid=0 send_seq=440619 receive_seq=440619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004171 heater_bed: target=0 temp=57.3 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.62 cputime=3191.200 memavail=3620160 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.0 pwm=0.000 | |
| Stats 443986.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002219 bytes_read=8706986 bytes_retransmit=9 bytes_invalid=0 send_seq=440620 receive_seq=440620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004184 heater_bed: target=0 temp=57.3 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.62 cputime=3191.221 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.9 pwm=0.000 | |
| Stats 443987.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002225 bytes_read=8707194 bytes_retransmit=9 bytes_invalid=0 send_seq=440621 receive_seq=440621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004083 heater_bed: target=0 temp=57.3 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.62 cputime=3191.241 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.8 pwm=0.000 | |
| Stats 443988.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002231 bytes_read=8707431 bytes_retransmit=9 bytes_invalid=0 send_seq=440622 receive_seq=440622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004153 heater_bed: target=0 temp=57.3 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.62 cputime=3191.262 memavail=3620184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.7 pwm=0.000 | |
| Stats 443989.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002237 bytes_read=8707638 bytes_retransmit=9 bytes_invalid=0 send_seq=440623 receive_seq=440623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004061 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.1 pwm=0.000 sysload=1.65 cputime=3191.283 memavail=3620048 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000 | |
| Stats 443990.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002243 bytes_read=8707846 bytes_retransmit=9 bytes_invalid=0 send_seq=440624 receive_seq=440624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003987 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.65 cputime=3191.304 memavail=3620124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000 | |
| Stats 443991.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002249 bytes_read=8708083 bytes_retransmit=9 bytes_invalid=0 send_seq=440625 receive_seq=440625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003932 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.65 cputime=3191.325 memavail=3620128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000 | |
| Stats 443992.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002255 bytes_read=8708276 bytes_retransmit=9 bytes_invalid=0 send_seq=440626 receive_seq=440626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003914 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.65 cputime=3191.346 memavail=3620196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000 | |
| Stats 443993.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002261 bytes_read=8708484 bytes_retransmit=9 bytes_invalid=0 send_seq=440627 receive_seq=440627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003993 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.65 cputime=3191.366 memavail=3620204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000 | |
| Stats 443994.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002267 bytes_read=8708721 bytes_retransmit=9 bytes_invalid=0 send_seq=440628 receive_seq=440628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003916 heater_bed: target=0 temp=57.2 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.60 cputime=3191.387 memavail=3620196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.3 pwm=0.000 | |
| Stats 443995.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002273 bytes_read=8708905 bytes_retransmit=9 bytes_invalid=0 send_seq=440629 receive_seq=440629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003934 heater_bed: target=0 temp=57.1 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.60 cputime=3191.407 memavail=3620260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000 | |
| Stats 443996.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002279 bytes_read=8709128 bytes_retransmit=9 bytes_invalid=0 send_seq=440630 receive_seq=440630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=57.1 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.60 cputime=3191.428 memavail=3620200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.3 pwm=0.000 | |
| Stats 443997.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002285 bytes_read=8709350 bytes_retransmit=9 bytes_invalid=0 send_seq=440631 receive_seq=440631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004056 heater_bed: target=0 temp=57.1 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.60 cputime=3191.448 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000 | |
| Stats 443998.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002291 bytes_read=8709543 bytes_retransmit=9 bytes_invalid=0 send_seq=440632 receive_seq=440632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004000 heater_bed: target=0 temp=57.1 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.60 cputime=3191.468 memavail=3620312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000 | |
| Stats 443999.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002297 bytes_read=8709780 bytes_retransmit=9 bytes_invalid=0 send_seq=440633 receive_seq=440633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004043 heater_bed: target=0 temp=57.0 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.63 cputime=3191.493 memavail=3620208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000 | |
| Stats 444000.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002303 bytes_read=8710002 bytes_retransmit=9 bytes_invalid=0 send_seq=440634 receive_seq=440634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004110 heater_bed: target=0 temp=57.0 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.63 cputime=3191.523 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.9 pwm=0.000 | |
| Stats 444001.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002309 bytes_read=8710195 bytes_retransmit=9 bytes_invalid=0 send_seq=440635 receive_seq=440635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004148 heater_bed: target=0 temp=57.0 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.63 cputime=3191.543 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000 | |
| Stats 444002.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002315 bytes_read=8710418 bytes_retransmit=9 bytes_invalid=0 send_seq=440636 receive_seq=440636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004192 heater_bed: target=0 temp=57.0 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.63 cputime=3191.564 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000 | |
| Stats 444003.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002321 bytes_read=8710640 bytes_retransmit=9 bytes_invalid=0 send_seq=440637 receive_seq=440637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004140 heater_bed: target=0 temp=56.9 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.63 cputime=3191.584 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000 | |
| Stats 444004.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002327 bytes_read=8710847 bytes_retransmit=9 bytes_invalid=0 send_seq=440638 receive_seq=440638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=56.9 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=38.0 pwm=0.000 sysload=1.58 cputime=3191.604 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000 | |
| Stats 444005.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002333 bytes_read=8711070 bytes_retransmit=9 bytes_invalid=0 send_seq=440639 receive_seq=440639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004071 heater_bed: target=0 temp=56.9 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.58 cputime=3191.624 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000 | |
| Stats 444006.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002339 bytes_read=8711292 bytes_retransmit=9 bytes_invalid=0 send_seq=440640 receive_seq=440640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004086 heater_bed: target=0 temp=56.9 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.58 cputime=3191.645 memavail=3620224 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000 | |
| Stats 444007.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002345 bytes_read=8711485 bytes_retransmit=9 bytes_invalid=0 send_seq=440641 receive_seq=440641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004046 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.58 cputime=3191.667 memavail=3620248 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000 | |
| Stats 444008.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002351 bytes_read=8711723 bytes_retransmit=9 bytes_invalid=0 send_seq=440642 receive_seq=440642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003994 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.58 cputime=3191.688 memavail=3620232 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000 | |
| Stats 444009.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002357 bytes_read=8711944 bytes_retransmit=9 bytes_invalid=0 send_seq=440643 receive_seq=440643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004017 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.708 memavail=3620240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000 | |
| Stats 444010.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002363 bytes_read=8712137 bytes_retransmit=9 bytes_invalid=0 send_seq=440644 receive_seq=440644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004009 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.731 memavail=3620332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000 | |
| Stats 444011.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002369 bytes_read=8712375 bytes_retransmit=9 bytes_invalid=0 send_seq=440645 receive_seq=440645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.753 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000 | |
| Stats 444012.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002375 bytes_read=8712582 bytes_retransmit=9 bytes_invalid=0 send_seq=440646 receive_seq=440646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004112 heater_bed: target=0 temp=56.8 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.773 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000 | |
| Stats 444013.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002381 bytes_read=8712775 bytes_retransmit=9 bytes_invalid=0 send_seq=440647 receive_seq=440647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004162 heater_bed: target=0 temp=56.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.793 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000 | |
| Stats 444014.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002387 bytes_read=8713027 bytes_retransmit=9 bytes_invalid=0 send_seq=440648 receive_seq=440648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004062 heater_bed: target=0 temp=56.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3191.814 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000 | |
| Stats 444015.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002393 bytes_read=8713234 bytes_retransmit=9 bytes_invalid=0 send_seq=440649 receive_seq=440649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004006 heater_bed: target=0 temp=56.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3191.834 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000 | |
| Stats 444016.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002399 bytes_read=8713427 bytes_retransmit=9 bytes_invalid=0 send_seq=440650 receive_seq=440650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004099 heater_bed: target=0 temp=56.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3191.857 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.1 pwm=0.000 | |
| Stats 444017.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002405 bytes_read=8713665 bytes_retransmit=9 bytes_invalid=0 send_seq=440651 receive_seq=440651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=56.7 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3191.879 memavail=3620220 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000 | |
| Stats 444018.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002411 bytes_read=8713859 bytes_retransmit=9 bytes_invalid=0 send_seq=440652 receive_seq=440652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004079 heater_bed: target=0 temp=56.6 pwm=0.000 z_thermal_adjust: temp=39.4 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3191.900 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000 | |
| Stats 444019.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002417 bytes_read=8714058 bytes_retransmit=9 bytes_invalid=0 send_seq=440653 receive_seq=440653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004041 heater_bed: target=0 temp=56.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.921 memavail=3620316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000 | |
| Stats 444020.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002423 bytes_read=8714296 bytes_retransmit=9 bytes_invalid=0 send_seq=440654 receive_seq=440654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004099 heater_bed: target=0 temp=56.6 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.942 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000 | |
| Stats 444021.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002429 bytes_read=8714503 bytes_retransmit=9 bytes_invalid=0 send_seq=440655 receive_seq=440655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004151 heater_bed: target=0 temp=56.5 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.962 memavail=3620368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000 | |
| Stats 444022.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002435 bytes_read=8714696 bytes_retransmit=9 bytes_invalid=0 send_seq=440656 receive_seq=440656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004162 heater_bed: target=0 temp=56.5 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3191.982 memavail=3620360 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000 | |
| Stats 444023.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002441 bytes_read=8714934 bytes_retransmit=9 bytes_invalid=0 send_seq=440657 receive_seq=440657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004086 heater_bed: target=0 temp=56.5 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.53 cputime=3192.004 memavail=3620320 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.7 pwm=0.000 | |
| Stats 444024.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002447 bytes_read=8715155 bytes_retransmit=9 bytes_invalid=0 send_seq=440658 receive_seq=440658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004008 heater_bed: target=0 temp=56.5 pwm=0.000 z_thermal_adjust: temp=39.3 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3192.024 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.7 pwm=0.000 | |
| Stats 444025.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002453 bytes_read=8715348 bytes_retransmit=9 bytes_invalid=0 send_seq=440659 receive_seq=440659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003927 heater_bed: target=0 temp=56.5 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3192.045 memavail=3620328 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000 | |
| Stats 444026.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002459 bytes_read=8715586 bytes_retransmit=9 bytes_invalid=0 send_seq=440660 receive_seq=440660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003997 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3192.066 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.7 pwm=0.000 | |
| Stats 444027.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002465 bytes_read=8715793 bytes_retransmit=9 bytes_invalid=0 send_seq=440661 receive_seq=440661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3192.087 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000 | |
| Stats 444028.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002471 bytes_read=8715986 bytes_retransmit=9 bytes_invalid=0 send_seq=440662 receive_seq=440662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004052 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.49 cputime=3192.108 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000 | |
| Stats 444029.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002477 bytes_read=8716238 bytes_retransmit=9 bytes_invalid=0 send_seq=440663 receive_seq=440663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004129 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.45 cputime=3192.128 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000 | |
| Stats 444030.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002489 bytes_read=8716461 bytes_retransmit=9 bytes_invalid=0 send_seq=440665 receive_seq=440665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004213 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.2 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.45 cputime=3192.148 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.5 pwm=0.000 | |
| Stats 444031.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002495 bytes_read=8716654 bytes_retransmit=9 bytes_invalid=0 send_seq=440666 receive_seq=440666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004201 heater_bed: target=0 temp=56.4 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.45 cputime=3192.169 memavail=3620292 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000 | |
| Stats 444032.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002501 bytes_read=8716892 bytes_retransmit=9 bytes_invalid=0 send_seq=440667 receive_seq=440667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004200 heater_bed: target=0 temp=56.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.45 cputime=3192.190 memavail=3620292 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.2 pwm=0.000 | |
| Stats 444033.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002507 bytes_read=8717099 bytes_retransmit=9 bytes_invalid=0 send_seq=440668 receive_seq=440668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004244 heater_bed: target=0 temp=56.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.45 cputime=3192.210 memavail=3620360 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000 | |
| Stats 444034.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002513 bytes_read=8717306 bytes_retransmit=9 bytes_invalid=0 send_seq=440669 receive_seq=440669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004329 heater_bed: target=0 temp=56.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.41 cputime=3192.231 memavail=3620216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000 | |
| Stats 444035.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002519 bytes_read=8717544 bytes_retransmit=9 bytes_invalid=0 send_seq=440670 receive_seq=440670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=56.3 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.41 cputime=3192.253 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000 | |
| Stats 444036.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002525 bytes_read=8717751 bytes_retransmit=9 bytes_invalid=0 send_seq=440671 receive_seq=440671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004206 heater_bed: target=0 temp=56.2 pwm=0.000 z_thermal_adjust: temp=39.1 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.41 cputime=3192.273 memavail=3620176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.2 pwm=0.000 | |
| Stats 444037.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002531 bytes_read=8717944 bytes_retransmit=9 bytes_invalid=0 send_seq=440672 receive_seq=440672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004121 heater_bed: target=0 temp=56.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.41 cputime=3192.293 memavail=3620304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000 | |
| Stats 444038.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002537 bytes_read=8718182 bytes_retransmit=9 bytes_invalid=0 send_seq=440673 receive_seq=440673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004023 heater_bed: target=0 temp=56.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.41 cputime=3192.314 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.1 pwm=0.000 | |
| Stats 444039.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002543 bytes_read=8718403 bytes_retransmit=9 bytes_invalid=0 send_seq=440674 receive_seq=440674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003932 heater_bed: target=0 temp=56.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.9 pwm=0.000 sysload=1.38 cputime=3192.335 memavail=3620268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.1 pwm=0.000 | |
| Stats 444040.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002549 bytes_read=8718596 bytes_retransmit=9 bytes_invalid=0 send_seq=440675 receive_seq=440675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003921 heater_bed: target=0 temp=56.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.38 cputime=3192.355 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.0 pwm=0.000 | |
| Stats 444041.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002555 bytes_read=8718831 bytes_retransmit=9 bytes_invalid=0 send_seq=440676 receive_seq=440676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003851 heater_bed: target=0 temp=56.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.38 cputime=3192.376 memavail=3620276 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000 | |
| Stats 444042.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002561 bytes_read=8719024 bytes_retransmit=9 bytes_invalid=0 send_seq=440677 receive_seq=440677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003917 heater_bed: target=0 temp=56.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.38 cputime=3192.397 memavail=3620308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000 | |
| Stats 444043.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002567 bytes_read=8719213 bytes_retransmit=9 bytes_invalid=0 send_seq=440678 receive_seq=440678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003966 heater_bed: target=0 temp=56.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.38 cputime=3192.417 memavail=3620244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000 | |
| Stats 444044.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002573 bytes_read=8719465 bytes_retransmit=9 bytes_invalid=0 send_seq=440679 receive_seq=440679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=56.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.35 cputime=3192.438 memavail=3620312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444045.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002579 bytes_read=8719672 bytes_retransmit=9 bytes_invalid=0 send_seq=440680 receive_seq=440680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=56.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.35 cputime=3192.458 memavail=3620336 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000 | |
| Stats 444046.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002585 bytes_read=8719865 bytes_retransmit=9 bytes_invalid=0 send_seq=440681 receive_seq=440681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003925 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.35 cputime=3192.477 memavail=3620320 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444047.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002591 bytes_read=8720103 bytes_retransmit=9 bytes_invalid=0 send_seq=440682 receive_seq=440682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.35 cputime=3192.498 memavail=3620360 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444048.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002597 bytes_read=8720310 bytes_retransmit=9 bytes_invalid=0 send_seq=440683 receive_seq=440683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003943 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.35 cputime=3192.519 memavail=3620328 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444049.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002603 bytes_read=8720517 bytes_retransmit=9 bytes_invalid=0 send_seq=440684 receive_seq=440684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003969 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.40 cputime=3192.540 memavail=3620264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444050.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002609 bytes_read=8720755 bytes_retransmit=9 bytes_invalid=0 send_seq=440685 receive_seq=440685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.40 cputime=3192.562 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444051.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002615 bytes_read=8720962 bytes_retransmit=9 bytes_invalid=0 send_seq=440686 receive_seq=440686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=56.0 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.40 cputime=3192.582 memavail=3620196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000 | |
| Stats 444052.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002621 bytes_read=8721155 bytes_retransmit=9 bytes_invalid=0 send_seq=440687 receive_seq=440687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003989 heater_bed: target=0 temp=55.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.40 cputime=3192.601 memavail=3620348 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000 | |
| Stats 444053.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002627 bytes_read=8721393 bytes_retransmit=9 bytes_invalid=0 send_seq=440688 receive_seq=440688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003908 heater_bed: target=0 temp=55.9 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.40 cputime=3192.623 memavail=3620436 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000 | |
| Stats 444054.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002633 bytes_read=8721614 bytes_retransmit=9 bytes_invalid=0 send_seq=440689 receive_seq=440689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=55.9 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.37 cputime=3192.644 memavail=3620340 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000 | |
| Stats 444055.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002639 bytes_read=8721807 bytes_retransmit=9 bytes_invalid=0 send_seq=440690 receive_seq=440690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003897 heater_bed: target=0 temp=55.8 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.37 cputime=3192.664 memavail=3620348 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.3 pwm=0.000 | |
| Stats 444056.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002645 bytes_read=8722045 bytes_retransmit=9 bytes_invalid=0 send_seq=440691 receive_seq=440691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003876 heater_bed: target=0 temp=55.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.37 cputime=3192.685 memavail=3620352 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.3 pwm=0.000 | |
| Stats 444057.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002651 bytes_read=8722252 bytes_retransmit=9 bytes_invalid=0 send_seq=440692 receive_seq=440692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 heater_bed: target=0 temp=55.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.37 cputime=3192.705 memavail=3620344 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.2 pwm=0.000 | |
| Stats 444058.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002657 bytes_read=8722445 bytes_retransmit=9 bytes_invalid=0 send_seq=440693 receive_seq=440693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003884 heater_bed: target=0 temp=55.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.37 cputime=3192.727 memavail=3620364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.3 pwm=0.000 | |
| Stats 444059.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002663 bytes_read=8722697 bytes_retransmit=9 bytes_invalid=0 send_seq=440694 receive_seq=440694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003898 heater_bed: target=0 temp=55.8 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.8 pwm=0.000 sysload=1.34 cputime=3192.749 memavail=3620364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.2 pwm=0.000 | |
| Stats 444060.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002669 bytes_read=8722904 bytes_retransmit=9 bytes_invalid=0 send_seq=440695 receive_seq=440695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003905 heater_bed: target=0 temp=55.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.34 cputime=3192.769 memavail=3620492 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.2 pwm=0.000 | |
| Stats 444061.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002675 bytes_read=8723097 bytes_retransmit=9 bytes_invalid=0 send_seq=440696 receive_seq=440696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003907 heater_bed: target=0 temp=55.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.34 cputime=3192.789 memavail=3620232 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000 | |
| Stats 444062.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002681 bytes_read=8723335 bytes_retransmit=9 bytes_invalid=0 send_seq=440697 receive_seq=440697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=55.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.34 cputime=3192.810 memavail=3620432 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.1 pwm=0.000 | |
| Stats 444063.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002687 bytes_read=8723542 bytes_retransmit=9 bytes_invalid=0 send_seq=440698 receive_seq=440698 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003956 heater_bed: target=0 temp=55.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.34 cputime=3192.831 memavail=3620300 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.9 pwm=0.000 | |
| Stats 444064.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002693 bytes_read=8723749 bytes_retransmit=9 bytes_invalid=0 send_seq=440699 receive_seq=440699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004051 heater_bed: target=0 temp=55.7 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.31 cputime=3192.852 memavail=3620372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.9 pwm=0.000 | |
| Stats 444065.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002699 bytes_read=8723983 bytes_retransmit=9 bytes_invalid=0 send_seq=440700 receive_seq=440700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004043 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.31 cputime=3192.874 memavail=3620284 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000 | |
| Stats 444066.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002705 bytes_read=8724176 bytes_retransmit=9 bytes_invalid=0 send_seq=440701 receive_seq=440701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003978 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.31 cputime=3192.895 memavail=3620376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.9 pwm=0.000 | |
| Stats 444067.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002711 bytes_read=8724365 bytes_retransmit=9 bytes_invalid=0 send_seq=440702 receive_seq=440702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004014 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.31 cputime=3192.916 memavail=3620312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000 | |
| Stats 444068.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002717 bytes_read=8724603 bytes_retransmit=9 bytes_invalid=0 send_seq=440703 receive_seq=440703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004104 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.31 cputime=3192.937 memavail=3620384 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000 | |
| Stats 444069.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002723 bytes_read=8724824 bytes_retransmit=9 bytes_invalid=0 send_seq=440704 receive_seq=440704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004145 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.29 cputime=3192.957 memavail=3620392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000 | |
| Stats 444070.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002729 bytes_read=8725017 bytes_retransmit=9 bytes_invalid=0 send_seq=440705 receive_seq=440705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004236 heater_bed: target=0 temp=55.6 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.29 cputime=3192.977 memavail=3620392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.7 pwm=0.000 | |
| Stats 444071.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002735 bytes_read=8725255 bytes_retransmit=9 bytes_invalid=0 send_seq=440706 receive_seq=440706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004139 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.29 cputime=3192.998 memavail=3620408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000 | |
| Stats 444072.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002741 bytes_read=8725462 bytes_retransmit=9 bytes_invalid=0 send_seq=440707 receive_seq=440707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.29 cputime=3193.018 memavail=3620392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000 | |
| Stats 444073.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002747 bytes_read=8725655 bytes_retransmit=9 bytes_invalid=0 send_seq=440708 receive_seq=440708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004097 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.29 cputime=3193.039 memavail=3620328 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000 | |
| Stats 444074.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002753 bytes_read=8725907 bytes_retransmit=9 bytes_invalid=0 send_seq=440709 receive_seq=440709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004131 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.26 cputime=3193.060 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000 | |
| Stats 444075.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002759 bytes_read=8726114 bytes_retransmit=9 bytes_invalid=0 send_seq=440710 receive_seq=440710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004036 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.26 cputime=3193.080 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.5 pwm=0.000 | |
| Stats 444076.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002765 bytes_read=8726322 bytes_retransmit=9 bytes_invalid=0 send_seq=440711 receive_seq=440711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004092 heater_bed: target=0 temp=55.5 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.26 cputime=3193.102 memavail=3620396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.5 pwm=0.000 | |
| Stats 444077.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002771 bytes_read=8726545 bytes_retransmit=9 bytes_invalid=0 send_seq=440712 receive_seq=440712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004040 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.26 cputime=3193.123 memavail=3620460 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000 | |
| Stats 444078.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002777 bytes_read=8726752 bytes_retransmit=9 bytes_invalid=0 send_seq=440713 receive_seq=440713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004139 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.26 cputime=3193.144 memavail=3614612 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.3 pwm=0.000 | |
| Stats 444079.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002783 bytes_read=8726974 bytes_retransmit=9 bytes_invalid=0 send_seq=440714 receive_seq=440714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004230 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.32 cputime=3193.165 memavail=3619912 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000 | |
| Stats 444080.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002789 bytes_read=8727197 bytes_retransmit=9 bytes_invalid=0 send_seq=440715 receive_seq=440715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004273 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.32 cputime=3193.187 memavail=3619984 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000 | |
| Stats 444081.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002795 bytes_read=8727404 bytes_retransmit=9 bytes_invalid=0 send_seq=440716 receive_seq=440716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004281 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.207 memavail=3619876 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000 | |
| Stats 444082.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002801 bytes_read=8727612 bytes_retransmit=9 bytes_invalid=0 send_seq=440717 receive_seq=440717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004362 heater_bed: target=0 temp=55.4 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.229 memavail=3619664 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000 | |
| Stats 444083.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002807 bytes_read=8727835 bytes_retransmit=9 bytes_invalid=0 send_seq=440718 receive_seq=440718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004376 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.7 pwm=0.000 sysload=1.32 cputime=3193.250 memavail=3619744 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.3 pwm=0.000 | |
| Stats 444084.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002813 bytes_read=8728056 bytes_retransmit=9 bytes_invalid=0 send_seq=440719 receive_seq=440719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004436 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.270 memavail=3619744 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.3 pwm=0.000 | |
| Stats 444085.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002819 bytes_read=8728264 bytes_retransmit=9 bytes_invalid=0 send_seq=440720 receive_seq=440720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004380 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.292 memavail=3619776 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000 | |
| Stats 444086.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002825 bytes_read=8728487 bytes_retransmit=9 bytes_invalid=0 send_seq=440721 receive_seq=440721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004359 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.313 memavail=3619624 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000 | |
| Stats 444087.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002831 bytes_read=8728694 bytes_retransmit=9 bytes_invalid=0 send_seq=440722 receive_seq=440722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004410 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.333 memavail=3619748 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000 | |
| Stats 444088.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002837 bytes_read=8728902 bytes_retransmit=9 bytes_invalid=0 send_seq=440723 receive_seq=440723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004467 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.353 memavail=3619748 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000 | |
| Stats 444089.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002843 bytes_read=8729131 bytes_retransmit=9 bytes_invalid=0 send_seq=440724 receive_seq=440724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004426 heater_bed: target=0 temp=55.3 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.35 cputime=3193.373 memavail=3619752 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.0 pwm=0.000 | |
| Stats 444090.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002849 bytes_read=8729324 bytes_retransmit=9 bytes_invalid=0 send_seq=440725 receive_seq=440725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004482 heater_bed: target=0 temp=55.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.35 cputime=3193.393 memavail=3619508 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000 | |
| Stats 444091.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002861 bytes_read=8729547 bytes_retransmit=9 bytes_invalid=0 send_seq=440727 receive_seq=440727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004444 heater_bed: target=0 temp=55.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.35 cputime=3193.415 memavail=3619508 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000 | |
| Stats 444092.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002867 bytes_read=8729770 bytes_retransmit=9 bytes_invalid=0 send_seq=440728 receive_seq=440728 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004497 heater_bed: target=0 temp=55.2 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.35 cputime=3193.435 memavail=3619508 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.0 pwm=0.000 | |
| Stats 444093.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002873 bytes_read=8729977 bytes_retransmit=9 bytes_invalid=0 send_seq=440729 receive_seq=440729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004528 heater_bed: target=0 temp=55.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.35 cputime=3193.455 memavail=3619476 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.9 pwm=0.000 | |
| Stats 444094.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002879 bytes_read=8730199 bytes_retransmit=9 bytes_invalid=0 send_seq=440730 receive_seq=440730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004467 heater_bed: target=0 temp=55.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.476 memavail=3619516 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444095.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002885 bytes_read=8730422 bytes_retransmit=9 bytes_invalid=0 send_seq=440731 receive_seq=440731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004484 heater_bed: target=0 temp=55.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.498 memavail=3619516 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.9 pwm=0.000 | |
| Stats 444096.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002891 bytes_read=8730629 bytes_retransmit=9 bytes_invalid=0 send_seq=440732 receive_seq=440732 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004391 heater_bed: target=0 temp=55.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.518 memavail=3619516 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444097.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002897 bytes_read=8730837 bytes_retransmit=9 bytes_invalid=0 send_seq=440733 receive_seq=440733 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004388 heater_bed: target=0 temp=55.1 pwm=0.000 z_thermal_adjust: temp=39.0 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.539 memavail=3619548 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444098.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002903 bytes_read=8731060 bytes_retransmit=9 bytes_invalid=0 send_seq=440734 receive_seq=440734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004421 heater_bed: target=0 temp=55.0 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.32 cputime=3193.559 memavail=3619456 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444099.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002909 bytes_read=8731281 bytes_retransmit=9 bytes_invalid=0 send_seq=440735 receive_seq=440735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004356 heater_bed: target=0 temp=55.0 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.580 memavail=3619432 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444100.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002915 bytes_read=8731489 bytes_retransmit=9 bytes_invalid=0 send_seq=440736 receive_seq=440736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004323 heater_bed: target=0 temp=55.0 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.600 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.7 pwm=0.000 | |
| Stats 444101.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002921 bytes_read=8731712 bytes_retransmit=9 bytes_invalid=0 send_seq=440737 receive_seq=440737 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004278 heater_bed: target=0 temp=55.0 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.621 memavail=3619484 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.7 pwm=0.000 | |
| Stats 444102.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002927 bytes_read=8731919 bytes_retransmit=9 bytes_invalid=0 send_seq=440738 receive_seq=440738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004248 heater_bed: target=0 temp=55.0 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.30 cputime=3193.641 memavail=3619536 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000 | |
| Stats 444103.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002933 bytes_read=8732127 bytes_retransmit=9 bytes_invalid=0 send_seq=440739 receive_seq=440739 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004196 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.6 pwm=0.000 sysload=1.30 cputime=3193.662 memavail=3619408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.6 pwm=0.000 | |
| Stats 444104.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002939 bytes_read=8732364 bytes_retransmit=9 bytes_invalid=0 send_seq=440740 receive_seq=440740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.27 cputime=3193.682 memavail=3619536 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.5 pwm=0.000 | |
| Stats 444105.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002945 bytes_read=8732571 bytes_retransmit=9 bytes_invalid=0 send_seq=440741 receive_seq=440741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004123 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.9 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.27 cputime=3193.701 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.5 pwm=0.000 | |
| Stats 444106.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002951 bytes_read=8732779 bytes_retransmit=9 bytes_invalid=0 send_seq=440742 receive_seq=440742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004091 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.27 cputime=3193.721 memavail=3619572 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.4 pwm=0.000 | |
| Stats 444107.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002957 bytes_read=8733002 bytes_retransmit=9 bytes_invalid=0 send_seq=440743 receive_seq=440743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004178 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.27 cputime=3193.741 memavail=3619540 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000 | |
| Stats 444108.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002963 bytes_read=8733209 bytes_retransmit=9 bytes_invalid=0 send_seq=440744 receive_seq=440744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004212 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.27 cputime=3193.762 memavail=3619516 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.5 pwm=0.000 | |
| Stats 444109.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002969 bytes_read=8733431 bytes_retransmit=9 bytes_invalid=0 send_seq=440745 receive_seq=440745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004133 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.33 cputime=3193.783 memavail=3619540 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.5 pwm=0.000 | |
| Stats 444110.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002975 bytes_read=8733654 bytes_retransmit=9 bytes_invalid=0 send_seq=440746 receive_seq=440746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004066 heater_bed: target=0 temp=54.9 pwm=0.000 z_thermal_adjust: temp=38.8 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.33 cputime=3193.803 memavail=3619552 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000 | |
| Stats 444111.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002981 bytes_read=8733861 bytes_retransmit=9 bytes_invalid=0 send_seq=440747 receive_seq=440747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004091 heater_bed: target=0 temp=54.8 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.33 cputime=3193.823 memavail=3619552 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000 | |
| Stats 444112.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002987 bytes_read=8734069 bytes_retransmit=9 bytes_invalid=0 send_seq=440748 receive_seq=440748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003995 heater_bed: target=0 temp=54.8 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.33 cputime=3193.843 memavail=3619632 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.4 pwm=0.000 | |
| Stats 444113.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002993 bytes_read=8734284 bytes_retransmit=9 bytes_invalid=0 send_seq=440749 receive_seq=440749 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004050 heater_bed: target=0 temp=54.8 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.33 cputime=3193.863 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000 | |
| Stats 444114.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18002999 bytes_read=8734492 bytes_retransmit=9 bytes_invalid=0 send_seq=440750 receive_seq=440750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=54.8 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.31 cputime=3193.884 memavail=3619552 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000 | |
| Stats 444115.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003005 bytes_read=8734700 bytes_retransmit=9 bytes_invalid=0 send_seq=440751 receive_seq=440751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003876 heater_bed: target=0 temp=54.7 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.31 cputime=3193.904 memavail=3619488 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000 | |
| Stats 444116.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003011 bytes_read=8734937 bytes_retransmit=9 bytes_invalid=0 send_seq=440752 receive_seq=440752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003850 heater_bed: target=0 temp=54.7 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.31 cputime=3193.925 memavail=3619564 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000 | |
| Stats 444117.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003017 bytes_read=8735130 bytes_retransmit=9 bytes_invalid=0 send_seq=440753 receive_seq=440753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003771 heater_bed: target=0 temp=54.7 pwm=0.000 z_thermal_adjust: temp=38.7 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.31 cputime=3193.945 memavail=3619564 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000 | |
| Stats 444118.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003023 bytes_read=8735338 bytes_retransmit=9 bytes_invalid=0 send_seq=440754 receive_seq=440754 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003883 heater_bed: target=0 temp=54.7 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.31 cputime=3193.965 memavail=3619460 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.2 pwm=0.000 | |
| Stats 444119.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003029 bytes_read=8735589 bytes_retransmit=9 bytes_invalid=0 send_seq=440755 receive_seq=440755 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003843 heater_bed: target=0 temp=54.7 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.5 pwm=0.000 sysload=1.28 cputime=3193.987 memavail=3619572 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444120.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003035 bytes_read=8735782 bytes_retransmit=9 bytes_invalid=0 send_seq=440756 receive_seq=440756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003797 heater_bed: target=0 temp=54.6 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.007 memavail=3619572 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444121.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003041 bytes_read=8735990 bytes_retransmit=9 bytes_invalid=0 send_seq=440757 receive_seq=440757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=54.6 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.028 memavail=3619572 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000 | |
| Stats 444122.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003047 bytes_read=8736227 bytes_retransmit=9 bytes_invalid=0 send_seq=440758 receive_seq=440758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003762 heater_bed: target=0 temp=54.6 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.049 memavail=3619572 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444123.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003053 bytes_read=8736420 bytes_retransmit=9 bytes_invalid=0 send_seq=440759 receive_seq=440759 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003855 heater_bed: target=0 temp=54.6 pwm=0.000 z_thermal_adjust: temp=38.6 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.067 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444124.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003059 bytes_read=8736642 bytes_retransmit=9 bytes_invalid=0 send_seq=440760 receive_seq=440760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003851 heater_bed: target=0 temp=54.6 pwm=0.000 z_thermal_adjust: temp=38.5 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.26 cputime=3194.087 memavail=3619680 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000 | |
| Stats 444125.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003065 bytes_read=8736879 bytes_retransmit=9 bytes_invalid=0 send_seq=440761 receive_seq=440761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003946 heater_bed: target=0 temp=54.5 pwm=0.000 z_thermal_adjust: temp=38.5 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.26 cputime=3194.109 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444126.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003071 bytes_read=8737072 bytes_retransmit=9 bytes_invalid=0 send_seq=440762 receive_seq=440762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=54.5 pwm=0.000 z_thermal_adjust: temp=38.5 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.26 cputime=3194.128 memavail=3619640 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444127.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003077 bytes_read=8737295 bytes_retransmit=9 bytes_invalid=0 send_seq=440763 receive_seq=440763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004006 heater_bed: target=0 temp=54.5 pwm=0.000 z_thermal_adjust: temp=38.5 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.26 cputime=3194.150 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444128.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003083 bytes_read=8737517 bytes_retransmit=9 bytes_invalid=0 send_seq=440764 receive_seq=440764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=54.5 pwm=0.000 z_thermal_adjust: temp=38.5 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.26 cputime=3194.170 memavail=3619584 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444129.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003089 bytes_read=8737710 bytes_retransmit=9 bytes_invalid=0 send_seq=440765 receive_seq=440765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004126 heater_bed: target=0 temp=54.5 pwm=0.000 z_thermal_adjust: temp=38.4 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.24 cputime=3194.189 memavail=3619560 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444130.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003095 bytes_read=8737947 bytes_retransmit=9 bytes_invalid=0 send_seq=440766 receive_seq=440766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004096 heater_bed: target=0 temp=54.4 pwm=0.000 z_thermal_adjust: temp=38.4 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.24 cputime=3194.209 memavail=3619592 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444131.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003101 bytes_read=8738169 bytes_retransmit=9 bytes_invalid=0 send_seq=440767 receive_seq=440767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004180 heater_bed: target=0 temp=54.4 pwm=0.000 z_thermal_adjust: temp=38.4 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.24 cputime=3194.230 memavail=3619632 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000 | |
| Stats 444132.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003107 bytes_read=8738362 bytes_retransmit=9 bytes_invalid=0 send_seq=440768 receive_seq=440768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004167 heater_bed: target=0 temp=54.4 pwm=0.000 z_thermal_adjust: temp=38.4 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.24 cputime=3194.250 memavail=3619576 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444133.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003113 bytes_read=8738585 bytes_retransmit=9 bytes_invalid=0 send_seq=440769 receive_seq=440769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004125 heater_bed: target=0 temp=54.4 pwm=0.000 z_thermal_adjust: temp=38.3 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.24 cputime=3194.272 memavail=3619528 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444134.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003119 bytes_read=8738807 bytes_retransmit=9 bytes_invalid=0 send_seq=440770 receive_seq=440770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004084 heater_bed: target=0 temp=54.4 pwm=0.000 z_thermal_adjust: temp=38.3 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.22 cputime=3194.292 memavail=3619592 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444135.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003125 bytes_read=8739014 bytes_retransmit=9 bytes_invalid=0 send_seq=440771 receive_seq=440771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004185 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.3 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.22 cputime=3194.312 memavail=3619608 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444136.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003131 bytes_read=8739237 bytes_retransmit=9 bytes_invalid=0 send_seq=440772 receive_seq=440772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.3 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.22 cputime=3194.332 memavail=3619704 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000 | |
| Stats 444137.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003137 bytes_read=8739447 bytes_retransmit=9 bytes_invalid=0 send_seq=440773 receive_seq=440773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004103 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.3 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.22 cputime=3194.352 memavail=3619616 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444138.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003143 bytes_read=8739631 bytes_retransmit=9 bytes_invalid=0 send_seq=440774 receive_seq=440774 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.2 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.22 cputime=3194.372 memavail=3619616 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444139.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003149 bytes_read=8739869 bytes_retransmit=9 bytes_invalid=0 send_seq=440775 receive_seq=440775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004213 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.2 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.393 memavail=3619744 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444140.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003155 bytes_read=8740090 bytes_retransmit=9 bytes_invalid=0 send_seq=440776 receive_seq=440776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004176 heater_bed: target=0 temp=54.3 pwm=0.000 z_thermal_adjust: temp=38.2 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.28 cputime=3194.414 memavail=3619620 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444141.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003161 bytes_read=8740283 bytes_retransmit=9 bytes_invalid=0 send_seq=440777 receive_seq=440777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004078 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.2 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.28 cputime=3194.433 memavail=3619628 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444142.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003167 bytes_read=8740521 bytes_retransmit=9 bytes_invalid=0 send_seq=440778 receive_seq=440778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.1 chamber_heater: target=0 temp=37.4 pwm=0.000 sysload=1.28 cputime=3194.454 memavail=3619628 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000 | |
| Stats 444143.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003173 bytes_read=8740728 bytes_retransmit=9 bytes_invalid=0 send_seq=440779 receive_seq=440779 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004193 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.1 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.28 cputime=3194.475 memavail=3619628 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000 | |
| Stats 444144.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003179 bytes_read=8740921 bytes_retransmit=9 bytes_invalid=0 send_seq=440780 receive_seq=440780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004209 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.1 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.26 cputime=3194.494 memavail=3619632 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444145.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003185 bytes_read=8741173 bytes_retransmit=9 bytes_invalid=0 send_seq=440781 receive_seq=440781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004161 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.1 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.26 cputime=3194.517 memavail=3619088 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000 | |
| Stats 444146.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003191 bytes_read=8741380 bytes_retransmit=9 bytes_invalid=0 send_seq=440782 receive_seq=440782 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004062 heater_bed: target=0 temp=54.2 pwm=0.000 z_thermal_adjust: temp=38.1 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.26 cputime=3194.537 memavail=3619240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000 | |
| Stats 444147.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003197 bytes_read=8741573 bytes_retransmit=9 bytes_invalid=0 send_seq=440783 receive_seq=440783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004027 heater_bed: target=0 temp=54.1 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.26 cputime=3194.556 memavail=3619256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000 | |
| Stats 444148.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003203 bytes_read=8741811 bytes_retransmit=9 bytes_invalid=0 send_seq=440784 receive_seq=440784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=54.1 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.26 cputime=3194.577 memavail=3619240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000 | |
| Stats 444149.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003209 bytes_read=8742018 bytes_retransmit=9 bytes_invalid=0 send_seq=440785 receive_seq=440785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004139 heater_bed: target=0 temp=54.1 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.24 cputime=3194.597 memavail=3619288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000 | |
| Stats 444150.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003215 bytes_read=8742225 bytes_retransmit=9 bytes_invalid=0 send_seq=440786 receive_seq=440786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004199 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.24 cputime=3194.618 memavail=3619244 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000 | |
| Stats 444151.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003221 bytes_read=8742463 bytes_retransmit=9 bytes_invalid=0 send_seq=440787 receive_seq=440787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004171 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.24 cputime=3194.639 memavail=3619364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000 | |
| Stats 444152.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003233 bytes_read=8742686 bytes_retransmit=9 bytes_invalid=0 send_seq=440789 receive_seq=440789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004148 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.24 cputime=3194.660 memavail=3619368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000 | |
| Stats 444153.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003239 bytes_read=8742879 bytes_retransmit=9 bytes_invalid=0 send_seq=440790 receive_seq=440790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004055 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.3 pwm=0.000 sysload=1.24 cputime=3194.680 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000 | |
| Stats 444154.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003245 bytes_read=8743117 bytes_retransmit=9 bytes_invalid=0 send_seq=440791 receive_seq=440791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004111 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.22 cputime=3194.701 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000 | |
| Stats 444155.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003251 bytes_read=8743338 bytes_retransmit=9 bytes_invalid=0 send_seq=440792 receive_seq=440792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004115 heater_bed: target=0 temp=54.0 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.22 cputime=3194.723 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000 | |
| Stats 444156.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003257 bytes_read=8743531 bytes_retransmit=9 bytes_invalid=0 send_seq=440793 receive_seq=440793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004036 heater_bed: target=0 temp=53.9 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.22 cputime=3194.743 memavail=3619292 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000 | |
| Stats 444157.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003263 bytes_read=8743769 bytes_retransmit=9 bytes_invalid=0 send_seq=440794 receive_seq=440794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003946 heater_bed: target=0 temp=53.9 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.22 cputime=3194.765 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000 | |
| Stats 444158.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003269 bytes_read=8743976 bytes_retransmit=9 bytes_invalid=0 send_seq=440795 receive_seq=440795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004006 heater_bed: target=0 temp=53.9 pwm=0.000 z_thermal_adjust: temp=38.0 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.22 cputime=3194.786 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000 | |
| Stats 444159.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003275 bytes_read=8744169 bytes_retransmit=9 bytes_invalid=0 send_seq=440796 receive_seq=440796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003923 heater_bed: target=0 temp=53.9 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.20 cputime=3194.805 memavail=3619432 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444160.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003281 bytes_read=8744421 bytes_retransmit=9 bytes_invalid=0 send_seq=440797 receive_seq=440797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003972 heater_bed: target=0 temp=53.8 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.20 cputime=3194.827 memavail=3619376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444161.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003287 bytes_read=8744615 bytes_retransmit=9 bytes_invalid=0 send_seq=440798 receive_seq=440798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004003 heater_bed: target=0 temp=53.8 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.20 cputime=3194.847 memavail=3619376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444162.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003293 bytes_read=8744799 bytes_retransmit=9 bytes_invalid=0 send_seq=440799 receive_seq=440799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004071 heater_bed: target=0 temp=53.8 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.20 cputime=3194.867 memavail=3619376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444163.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003299 bytes_read=8745037 bytes_retransmit=9 bytes_invalid=0 send_seq=440800 receive_seq=440800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004177 heater_bed: target=0 temp=53.8 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.20 cputime=3194.889 memavail=3619264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444164.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003305 bytes_read=8745244 bytes_retransmit=9 bytes_invalid=0 send_seq=440801 receive_seq=440801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004169 heater_bed: target=0 temp=53.8 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.18 cputime=3194.910 memavail=3619508 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444165.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003311 bytes_read=8745451 bytes_retransmit=9 bytes_invalid=0 send_seq=440802 receive_seq=440802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004067 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.9 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.18 cputime=3194.929 memavail=3619648 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444166.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003317 bytes_read=8745689 bytes_retransmit=9 bytes_invalid=0 send_seq=440803 receive_seq=440803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004030 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.18 cputime=3194.956 memavail=3619576 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444167.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003323 bytes_read=8745896 bytes_retransmit=9 bytes_invalid=0 send_seq=440804 receive_seq=440804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004048 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.18 cputime=3194.982 memavail=3619536 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444168.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003329 bytes_read=8746089 bytes_retransmit=9 bytes_invalid=0 send_seq=440805 receive_seq=440805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004011 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.18 cputime=3195.003 memavail=3619640 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444169.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003335 bytes_read=8746327 bytes_retransmit=9 bytes_invalid=0 send_seq=440806 receive_seq=440806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004054 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.25 cputime=3195.026 memavail=3619408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444170.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003341 bytes_read=8746548 bytes_retransmit=9 bytes_invalid=0 send_seq=440807 receive_seq=440807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003962 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.25 cputime=3195.047 memavail=3619296 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444171.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003347 bytes_read=8746741 bytes_retransmit=9 bytes_invalid=0 send_seq=440808 receive_seq=440808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004029 heater_bed: target=0 temp=53.7 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.25 cputime=3195.067 memavail=3619368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444172.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003353 bytes_read=8746979 bytes_retransmit=9 bytes_invalid=0 send_seq=440809 receive_seq=440809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003997 heater_bed: target=0 temp=53.6 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.25 cputime=3195.088 memavail=3619368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444173.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003359 bytes_read=8747186 bytes_retransmit=9 bytes_invalid=0 send_seq=440810 receive_seq=440810 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004052 heater_bed: target=0 temp=53.6 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.25 cputime=3195.109 memavail=3619344 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000 | |
| Stats 444174.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003365 bytes_read=8747379 bytes_retransmit=9 bytes_invalid=0 send_seq=440811 receive_seq=440811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003978 heater_bed: target=0 temp=53.6 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.23 cputime=3195.129 memavail=3619304 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444175.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003371 bytes_read=8747631 bytes_retransmit=9 bytes_invalid=0 send_seq=440812 receive_seq=440812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004054 heater_bed: target=0 temp=53.6 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.23 cputime=3195.151 memavail=3619208 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444176.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003377 bytes_read=8747838 bytes_retransmit=9 bytes_invalid=0 send_seq=440813 receive_seq=440813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003965 heater_bed: target=0 temp=53.6 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.23 cputime=3195.170 memavail=3619308 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444177.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003383 bytes_read=8748031 bytes_retransmit=9 bytes_invalid=0 send_seq=440814 receive_seq=440814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004001 heater_bed: target=0 temp=53.5 pwm=0.000 z_thermal_adjust: temp=37.8 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.23 cputime=3195.189 memavail=3619360 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444178.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003389 bytes_read=8748269 bytes_retransmit=9 bytes_invalid=0 send_seq=440815 receive_seq=440815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004020 heater_bed: target=0 temp=53.5 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.23 cputime=3195.211 memavail=3619392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444179.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003395 bytes_read=8748476 bytes_retransmit=9 bytes_invalid=0 send_seq=440816 receive_seq=440816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004031 heater_bed: target=0 temp=53.5 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.29 cputime=3195.232 memavail=3619400 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444180.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003401 bytes_read=8748683 bytes_retransmit=9 bytes_invalid=0 send_seq=440817 receive_seq=440817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004092 heater_bed: target=0 temp=53.5 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.29 cputime=3195.252 memavail=3619320 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444181.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003407 bytes_read=8748921 bytes_retransmit=9 bytes_invalid=0 send_seq=440818 receive_seq=440818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004060 heater_bed: target=0 temp=53.5 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.29 cputime=3195.277 memavail=3619256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444182.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003413 bytes_read=8749128 bytes_retransmit=9 bytes_invalid=0 send_seq=440819 receive_seq=440819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003971 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.29 cputime=3195.298 memavail=3619392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000 | |
| Stats 444183.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003419 bytes_read=8749321 bytes_retransmit=9 bytes_invalid=0 send_seq=440820 receive_seq=440820 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004021 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.7 chamber_heater: target=0 temp=37.2 pwm=0.000 sysload=1.29 cputime=3195.318 memavail=3619332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000 | |
| Stats 444184.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003425 bytes_read=8749557 bytes_retransmit=9 bytes_invalid=0 send_seq=440821 receive_seq=440821 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003953 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.6 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.27 cputime=3195.338 memavail=3619396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444185.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003431 bytes_read=8749764 bytes_retransmit=9 bytes_invalid=0 send_seq=440822 receive_seq=440822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.6 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.27 cputime=3195.359 memavail=3619236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444186.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003437 bytes_read=8749951 bytes_retransmit=9 bytes_invalid=0 send_seq=440823 receive_seq=440823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003952 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.6 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.27 cputime=3195.379 memavail=3619460 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444187.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003443 bytes_read=8750189 bytes_retransmit=9 bytes_invalid=0 send_seq=440824 receive_seq=440824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004045 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.6 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.27 cputime=3195.401 memavail=3619428 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444188.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003449 bytes_read=8750396 bytes_retransmit=9 bytes_invalid=0 send_seq=440825 receive_seq=440825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004106 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.27 cputime=3195.421 memavail=3619332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444189.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003455 bytes_read=8750589 bytes_retransmit=9 bytes_invalid=0 send_seq=440826 receive_seq=440826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004142 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.25 cputime=3195.440 memavail=3619472 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444190.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003461 bytes_read=8750841 bytes_retransmit=9 bytes_invalid=0 send_seq=440827 receive_seq=440827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004095 heater_bed: target=0 temp=53.4 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.25 cputime=3195.462 memavail=3619376 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444191.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003467 bytes_read=8751048 bytes_retransmit=9 bytes_invalid=0 send_seq=440828 receive_seq=440828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004136 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.25 cputime=3195.486 memavail=3619400 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000 | |
| Stats 444192.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003473 bytes_read=8751241 bytes_retransmit=9 bytes_invalid=0 send_seq=440829 receive_seq=440829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004201 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.25 cputime=3195.506 memavail=3619280 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444193.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003479 bytes_read=8751479 bytes_retransmit=9 bytes_invalid=0 send_seq=440830 receive_seq=440830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004143 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.5 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.25 cputime=3195.528 memavail=3619408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444194.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003485 bytes_read=8751686 bytes_retransmit=9 bytes_invalid=0 send_seq=440831 receive_seq=440831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004195 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.23 cputime=3195.548 memavail=3619488 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444195.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003491 bytes_read=8751893 bytes_retransmit=9 bytes_invalid=0 send_seq=440832 receive_seq=440832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004122 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.23 cputime=3195.569 memavail=3619440 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444196.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003497 bytes_read=8752131 bytes_retransmit=9 bytes_invalid=0 send_seq=440833 receive_seq=440833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004072 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.23 cputime=3195.590 memavail=3619264 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444197.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003503 bytes_read=8752338 bytes_retransmit=9 bytes_invalid=0 send_seq=440834 receive_seq=440834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004123 heater_bed: target=0 temp=53.3 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.23 cputime=3195.612 memavail=3619480 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444198.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003509 bytes_read=8752531 bytes_retransmit=9 bytes_invalid=0 send_seq=440835 receive_seq=440835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004035 heater_bed: target=0 temp=53.2 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.23 cputime=3195.632 memavail=3619352 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444199.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003515 bytes_read=8752769 bytes_retransmit=9 bytes_invalid=0 send_seq=440836 receive_seq=440836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004026 heater_bed: target=0 temp=53.2 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.37 cputime=3195.655 memavail=3619612 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444200.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003521 bytes_read=8752990 bytes_retransmit=9 bytes_invalid=0 send_seq=440837 receive_seq=440837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003964 heater_bed: target=0 temp=53.2 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.1 pwm=0.000 sysload=1.37 cputime=3195.677 memavail=3619604 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444201.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003527 bytes_read=8753183 bytes_retransmit=9 bytes_invalid=0 send_seq=440838 receive_seq=440838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004069 heater_bed: target=0 temp=53.2 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.37 cputime=3195.697 memavail=3619596 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444202.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003533 bytes_read=8753421 bytes_retransmit=9 bytes_invalid=0 send_seq=440839 receive_seq=440839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004172 heater_bed: target=0 temp=53.2 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.37 cputime=3195.719 memavail=3619604 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000 | |
| Stats 444203.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003539 bytes_read=8753628 bytes_retransmit=9 bytes_invalid=0 send_seq=440840 receive_seq=440840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004115 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.4 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.37 cputime=3195.740 memavail=3619524 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444204.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003545 bytes_read=8753836 bytes_retransmit=9 bytes_invalid=0 send_seq=440841 receive_seq=440841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004124 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.34 cputime=3195.760 memavail=3619604 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444205.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003551 bytes_read=8754073 bytes_retransmit=9 bytes_invalid=0 send_seq=440842 receive_seq=440842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004199 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.34 cputime=3195.782 memavail=3619476 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444206.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003557 bytes_read=8754280 bytes_retransmit=9 bytes_invalid=0 send_seq=440843 receive_seq=440843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004162 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.34 cputime=3195.804 memavail=3619604 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444207.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003563 bytes_read=8754488 bytes_retransmit=9 bytes_invalid=0 send_seq=440844 receive_seq=440844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004224 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.34 cputime=3195.826 memavail=3619620 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444208.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003569 bytes_read=8754708 bytes_retransmit=9 bytes_invalid=0 send_seq=440845 receive_seq=440845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004239 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.34 cputime=3195.848 memavail=3619804 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444209.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003575 bytes_read=8754901 bytes_retransmit=9 bytes_invalid=0 send_seq=440846 receive_seq=440846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004287 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.31 cputime=3195.868 memavail=3619748 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000 | |
| Stats 444210.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003581 bytes_read=8755118 bytes_retransmit=9 bytes_invalid=0 send_seq=440847 receive_seq=440847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004245 heater_bed: target=0 temp=53.1 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.31 cputime=3195.888 memavail=3619756 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000 | |
| Stats 444211.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003587 bytes_read=8755341 bytes_retransmit=9 bytes_invalid=0 send_seq=440848 receive_seq=440848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004300 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.31 cputime=3195.910 memavail=3619752 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444212.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003593 bytes_read=8755548 bytes_retransmit=9 bytes_invalid=0 send_seq=440849 receive_seq=440849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004374 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.31 cputime=3195.930 memavail=3619752 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444213.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003605 bytes_read=8755756 bytes_retransmit=9 bytes_invalid=0 send_seq=440851 receive_seq=440850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004320 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.3 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.31 cputime=3195.950 memavail=3619764 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444214.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003611 bytes_read=8755995 bytes_retransmit=9 bytes_invalid=0 send_seq=440852 receive_seq=440852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004398 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.29 cputime=3195.971 memavail=3619732 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444215.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003617 bytes_read=8756216 bytes_retransmit=9 bytes_invalid=0 send_seq=440853 receive_seq=440853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004347 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.29 cputime=3195.988 memavail=3619884 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444216.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003623 bytes_read=8756424 bytes_retransmit=9 bytes_invalid=0 send_seq=440854 receive_seq=440854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004237 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.29 cputime=3196.008 memavail=3619764 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000 | |
| Stats 444217.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003629 bytes_read=8756647 bytes_retransmit=9 bytes_invalid=0 send_seq=440855 receive_seq=440855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004319 heater_bed: target=0 temp=53.0 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.29 cputime=3196.029 memavail=3619732 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444218.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003635 bytes_read=8756854 bytes_retransmit=9 bytes_invalid=0 send_seq=440856 receive_seq=440856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004372 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.29 cputime=3196.049 memavail=3619768 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444219.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003641 bytes_read=8757062 bytes_retransmit=9 bytes_invalid=0 send_seq=440857 receive_seq=440857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004338 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.26 cputime=3196.069 memavail=3619836 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000 | |
| Stats 444220.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003647 bytes_read=8757299 bytes_retransmit=9 bytes_invalid=0 send_seq=440858 receive_seq=440858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004374 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.26 cputime=3196.089 memavail=3619776 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444221.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003653 bytes_read=8757506 bytes_retransmit=9 bytes_invalid=0 send_seq=440859 receive_seq=440859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004361 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=37.0 pwm=0.000 sysload=1.26 cputime=3196.114 memavail=3619776 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444222.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003659 bytes_read=8757714 bytes_retransmit=9 bytes_invalid=0 send_seq=440860 receive_seq=440860 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004391 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.26 cputime=3196.139 memavail=3619744 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444223.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003665 bytes_read=8757937 bytes_retransmit=9 bytes_invalid=0 send_seq=440861 receive_seq=440861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004381 heater_bed: target=0 temp=52.9 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.26 cputime=3196.161 memavail=3619888 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000 | |
| Stats 444224.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003671 bytes_read=8758144 bytes_retransmit=9 bytes_invalid=0 send_seq=440862 receive_seq=440862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004450 heater_bed: target=0 temp=52.8 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.24 cputime=3196.182 memavail=3619820 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000 | |
| Stats 444225.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003677 bytes_read=8758366 bytes_retransmit=9 bytes_invalid=0 send_seq=440863 receive_seq=440863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004430 heater_bed: target=0 temp=52.8 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.24 cputime=3196.202 memavail=3619784 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444226.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003683 bytes_read=8758589 bytes_retransmit=9 bytes_invalid=0 send_seq=440864 receive_seq=440864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004316 heater_bed: target=0 temp=52.8 pwm=0.000 z_thermal_adjust: temp=37.2 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.24 cputime=3196.223 memavail=3619912 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444227.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003689 bytes_read=8758796 bytes_retransmit=9 bytes_invalid=0 send_seq=440865 receive_seq=440865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004374 heater_bed: target=0 temp=52.8 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.24 cputime=3196.244 memavail=3619784 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444228.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003695 bytes_read=8759004 bytes_retransmit=9 bytes_invalid=0 send_seq=440866 receive_seq=440866 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004426 heater_bed: target=0 temp=52.8 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.24 cputime=3196.264 memavail=3619784 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000 | |
| Stats 444229.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003701 bytes_read=8759227 bytes_retransmit=9 bytes_invalid=0 send_seq=440867 receive_seq=440867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004314 heater_bed: target=0 temp=52.7 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.22 cputime=3196.287 memavail=3619688 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000 | |
| Stats 444230.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003707 bytes_read=8759448 bytes_retransmit=9 bytes_invalid=0 send_seq=440868 receive_seq=440868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004245 heater_bed: target=0 temp=52.7 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.22 cputime=3196.308 memavail=3619812 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000 | |
| Stats 444231.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003713 bytes_read=8759656 bytes_retransmit=9 bytes_invalid=0 send_seq=440869 receive_seq=440869 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=52.7 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.22 cputime=3196.330 memavail=3619816 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000 | |
| Stats 444232.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003719 bytes_read=8759873 bytes_retransmit=9 bytes_invalid=0 send_seq=440870 receive_seq=440870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004203 heater_bed: target=0 temp=52.7 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.22 cputime=3196.351 memavail=3619816 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000 | |
| Stats 444233.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003725 bytes_read=8760066 bytes_retransmit=9 bytes_invalid=0 send_seq=440871 receive_seq=440871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004153 heater_bed: target=0 temp=52.7 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.22 cputime=3196.371 memavail=3619816 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000 | |
| Stats 444234.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003731 bytes_read=8760273 bytes_retransmit=9 bytes_invalid=0 send_seq=440872 receive_seq=440872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004130 heater_bed: target=0 temp=52.6 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.20 cputime=3196.393 memavail=3619848 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000 | |
| Stats 444235.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003737 bytes_read=8760510 bytes_retransmit=9 bytes_invalid=0 send_seq=440873 receive_seq=440873 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004158 heater_bed: target=0 temp=52.6 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.20 cputime=3196.415 memavail=3619820 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000 | |
| Stats 444236.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003743 bytes_read=8760717 bytes_retransmit=9 bytes_invalid=0 send_seq=440874 receive_seq=440874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004106 heater_bed: target=0 temp=52.6 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.20 cputime=3196.437 memavail=3619820 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000 | |
| Stats 444237.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003749 bytes_read=8760925 bytes_retransmit=9 bytes_invalid=0 send_seq=440875 receive_seq=440875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004128 heater_bed: target=0 temp=52.6 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.20 cputime=3196.456 memavail=3619920 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000 | |
| Stats 444238.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003755 bytes_read=8761148 bytes_retransmit=9 bytes_invalid=0 send_seq=440876 receive_seq=440876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004056 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.20 cputime=3196.478 memavail=3619828 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444239.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003761 bytes_read=8761355 bytes_retransmit=9 bytes_invalid=0 send_seq=440877 receive_seq=440877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004031 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.9 pwm=0.000 sysload=1.27 cputime=3196.500 memavail=3619916 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444240.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003767 bytes_read=8761577 bytes_retransmit=9 bytes_invalid=0 send_seq=440878 receive_seq=440878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.27 cputime=3196.520 memavail=3619828 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444241.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003773 bytes_read=8761800 bytes_retransmit=9 bytes_invalid=0 send_seq=440879 receive_seq=440879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004084 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.1 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.27 cputime=3196.542 memavail=3619832 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444242.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003779 bytes_read=8762007 bytes_retransmit=9 bytes_invalid=0 send_seq=440880 receive_seq=440880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004057 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.27 cputime=3196.563 memavail=3619840 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444243.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003785 bytes_read=8762215 bytes_retransmit=9 bytes_invalid=0 send_seq=440881 receive_seq=440881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.27 cputime=3196.583 memavail=3619848 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444244.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003791 bytes_read=8762452 bytes_retransmit=9 bytes_invalid=0 send_seq=440882 receive_seq=440882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004200 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.25 cputime=3196.605 memavail=3619976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000 | |
| Stats 444245.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003797 bytes_read=8762659 bytes_retransmit=9 bytes_invalid=0 send_seq=440883 receive_seq=440883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004112 heater_bed: target=0 temp=52.5 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.25 cputime=3196.625 memavail=3619864 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444246.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003803 bytes_read=8762867 bytes_retransmit=9 bytes_invalid=0 send_seq=440884 receive_seq=440884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004067 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.25 cputime=3196.646 memavail=3619784 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000 | |
| Stats 444247.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003809 bytes_read=8763104 bytes_retransmit=9 bytes_invalid=0 send_seq=440885 receive_seq=440885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003996 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.25 cputime=3196.668 memavail=3619848 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000 | |
| Stats 444248.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003815 bytes_read=8763297 bytes_retransmit=9 bytes_invalid=0 send_seq=440886 receive_seq=440886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003998 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.25 cputime=3196.689 memavail=3619848 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444249.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003821 bytes_read=8763505 bytes_retransmit=9 bytes_invalid=0 send_seq=440887 receive_seq=440887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004047 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.23 cputime=3196.709 memavail=3619860 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000 | |
| Stats 444250.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003827 bytes_read=8763756 bytes_retransmit=9 bytes_invalid=0 send_seq=440888 receive_seq=440888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004074 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.23 cputime=3196.731 memavail=3619932 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444251.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003833 bytes_read=8763949 bytes_retransmit=9 bytes_invalid=0 send_seq=440889 receive_seq=440889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004124 heater_bed: target=0 temp=52.4 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.8 pwm=0.000 sysload=1.23 cputime=3196.751 memavail=3619860 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444252.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003839 bytes_read=8764157 bytes_retransmit=9 bytes_invalid=0 send_seq=440890 receive_seq=440890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.23 cputime=3196.772 memavail=3619932 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000 | |
| Stats 444253.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003845 bytes_read=8764394 bytes_retransmit=9 bytes_invalid=0 send_seq=440891 receive_seq=440891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004207 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=37.0 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.23 cputime=3196.795 memavail=3619980 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444254.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003851 bytes_read=8764587 bytes_retransmit=9 bytes_invalid=0 send_seq=440892 receive_seq=440892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004226 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.21 cputime=3196.815 memavail=3619836 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444255.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003857 bytes_read=8764824 bytes_retransmit=9 bytes_invalid=0 send_seq=440893 receive_seq=440893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004179 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.21 cputime=3196.837 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444256.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003863 bytes_read=8765038 bytes_retransmit=9 bytes_invalid=0 send_seq=440894 receive_seq=440894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.21 cputime=3196.858 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444257.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003869 bytes_read=8765218 bytes_retransmit=9 bytes_invalid=0 send_seq=440895 receive_seq=440895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004232 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.21 cputime=3196.877 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444258.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003875 bytes_read=8765441 bytes_retransmit=9 bytes_invalid=0 send_seq=440896 receive_seq=440896 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=52.3 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.21 cputime=3196.898 memavail=3620004 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444259.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003881 bytes_read=8765663 bytes_retransmit=9 bytes_invalid=0 send_seq=440897 receive_seq=440897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.19 cputime=3196.920 memavail=3620012 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444260.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003887 bytes_read=8765870 bytes_retransmit=9 bytes_invalid=0 send_seq=440898 receive_seq=440898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004208 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.19 cputime=3196.940 memavail=3619804 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000 | |
| Stats 444261.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003893 bytes_read=8766093 bytes_retransmit=9 bytes_invalid=0 send_seq=440899 receive_seq=440899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004235 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.19 cputime=3196.962 memavail=3619764 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444262.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003899 bytes_read=8766315 bytes_retransmit=9 bytes_invalid=0 send_seq=440900 receive_seq=440900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004146 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.19 cputime=3196.983 memavail=3619764 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444263.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003905 bytes_read=8766508 bytes_retransmit=9 bytes_invalid=0 send_seq=440901 receive_seq=440901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004084 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.19 cputime=3197.004 memavail=3619900 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444264.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003911 bytes_read=8766731 bytes_retransmit=9 bytes_invalid=0 send_seq=440902 receive_seq=440902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004158 heater_bed: target=0 temp=52.2 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.18 cputime=3197.025 memavail=3619032 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444265.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003917 bytes_read=8766967 bytes_retransmit=9 bytes_invalid=0 send_seq=440903 receive_seq=440903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004100 heater_bed: target=0 temp=52.1 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.18 cputime=3197.047 memavail=3619016 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444266.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003923 bytes_read=8767160 bytes_retransmit=9 bytes_invalid=0 send_seq=440904 receive_seq=440904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004014 heater_bed: target=0 temp=52.1 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.18 cputime=3197.067 memavail=3618944 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444267.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003929 bytes_read=8767398 bytes_retransmit=9 bytes_invalid=0 send_seq=440905 receive_seq=440905 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=52.1 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.18 cputime=3197.089 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000 | |
| Stats 444268.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003935 bytes_read=8767605 bytes_retransmit=9 bytes_invalid=0 send_seq=440906 receive_seq=440906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=52.1 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.18 cputime=3197.110 memavail=3618960 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444269.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003941 bytes_read=8767798 bytes_retransmit=9 bytes_invalid=0 send_seq=440907 receive_seq=440907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004091 heater_bed: target=0 temp=52.1 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.16 cputime=3197.130 memavail=3618928 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000 | |
| Stats 444270.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003947 bytes_read=8768050 bytes_retransmit=9 bytes_invalid=0 send_seq=440908 receive_seq=440908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004085 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.16 cputime=3197.152 memavail=3618936 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444271.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003953 bytes_read=8768257 bytes_retransmit=9 bytes_invalid=0 send_seq=440909 receive_seq=440909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004068 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.16 cputime=3197.173 memavail=3618928 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444272.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003959 bytes_read=8768450 bytes_retransmit=9 bytes_invalid=0 send_seq=440910 receive_seq=440910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004157 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.9 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.16 cputime=3197.194 memavail=3618964 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444273.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003965 bytes_read=8768688 bytes_retransmit=9 bytes_invalid=0 send_seq=440911 receive_seq=440911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004059 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.16 cputime=3197.216 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444274.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003971 bytes_read=8768895 bytes_retransmit=9 bytes_invalid=0 send_seq=440912 receive_seq=440912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004044 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.15 cputime=3197.236 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444275.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003983 bytes_read=8769118 bytes_retransmit=9 bytes_invalid=0 send_seq=440914 receive_seq=440914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004143 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.7 pwm=0.000 sysload=1.15 cputime=3197.258 memavail=3619016 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444276.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003989 bytes_read=8769356 bytes_retransmit=9 bytes_invalid=0 send_seq=440915 receive_seq=440915 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004070 heater_bed: target=0 temp=52.0 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.15 cputime=3197.280 memavail=3619000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444277.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18003995 bytes_read=8769563 bytes_retransmit=9 bytes_invalid=0 send_seq=440916 receive_seq=440916 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004146 heater_bed: target=0 temp=51.9 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.15 cputime=3197.301 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444278.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004001 bytes_read=8769756 bytes_retransmit=9 bytes_invalid=0 send_seq=440917 receive_seq=440917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004122 heater_bed: target=0 temp=51.9 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.15 cputime=3197.322 memavail=3618952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444279.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004007 bytes_read=8769994 bytes_retransmit=9 bytes_invalid=0 send_seq=440918 receive_seq=440918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004090 heater_bed: target=0 temp=51.9 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.14 cputime=3197.344 memavail=3618904 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444280.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004013 bytes_read=8770204 bytes_retransmit=9 bytes_invalid=0 send_seq=440919 receive_seq=440919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=51.9 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.14 cputime=3197.364 memavail=3618936 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000 | |
| Stats 444281.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004019 bytes_read=8770386 bytes_retransmit=9 bytes_invalid=0 send_seq=440920 receive_seq=440920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003964 heater_bed: target=0 temp=51.9 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.14 cputime=3197.384 memavail=3618984 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444282.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004025 bytes_read=8770624 bytes_retransmit=9 bytes_invalid=0 send_seq=440921 receive_seq=440921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004048 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.14 cputime=3197.406 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444283.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004031 bytes_read=8770831 bytes_retransmit=9 bytes_invalid=0 send_seq=440922 receive_seq=440922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004054 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.14 cputime=3197.427 memavail=3618832 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444284.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004037 bytes_read=8771024 bytes_retransmit=9 bytes_invalid=0 send_seq=440923 receive_seq=440923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004062 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.12 cputime=3197.447 memavail=3619000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444285.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004043 bytes_read=8771276 bytes_retransmit=9 bytes_invalid=0 send_seq=440924 receive_seq=440924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.12 cputime=3197.469 memavail=3619000 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444286.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004049 bytes_read=8771483 bytes_retransmit=9 bytes_invalid=0 send_seq=440925 receive_seq=440925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004205 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.12 cputime=3197.489 memavail=3618944 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444287.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004055 bytes_read=8771676 bytes_retransmit=9 bytes_invalid=0 send_seq=440926 receive_seq=440926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004154 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.12 cputime=3197.510 memavail=3618992 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444288.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004061 bytes_read=8771914 bytes_retransmit=9 bytes_invalid=0 send_seq=440927 receive_seq=440927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004182 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.12 cputime=3197.532 memavail=3619104 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444289.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004067 bytes_read=8772121 bytes_retransmit=9 bytes_invalid=0 send_seq=440928 receive_seq=440928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004220 heater_bed: target=0 temp=51.8 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.11 cputime=3197.552 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444290.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004073 bytes_read=8772328 bytes_retransmit=9 bytes_invalid=0 send_seq=440929 receive_seq=440929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004172 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.11 cputime=3197.573 memavail=3619044 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444291.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004079 bytes_read=8772566 bytes_retransmit=9 bytes_invalid=0 send_seq=440930 receive_seq=440930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004265 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.11 cputime=3197.594 memavail=3619032 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444292.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004085 bytes_read=8772773 bytes_retransmit=9 bytes_invalid=0 send_seq=440931 receive_seq=440931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004218 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.11 cputime=3197.615 memavail=3619008 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444293.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004091 bytes_read=8772966 bytes_retransmit=9 bytes_invalid=0 send_seq=440932 receive_seq=440932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004301 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.11 cputime=3197.635 memavail=3619040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444294.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004097 bytes_read=8773204 bytes_retransmit=9 bytes_invalid=0 send_seq=440933 receive_seq=440933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004228 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.10 cputime=3197.657 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444295.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004103 bytes_read=8773425 bytes_retransmit=9 bytes_invalid=0 send_seq=440934 receive_seq=440934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.679 memavail=3619064 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000 | |
| Stats 444296.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004109 bytes_read=8773618 bytes_retransmit=9 bytes_invalid=0 send_seq=440935 receive_seq=440935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004132 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.698 memavail=3619176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000 | |
| Stats 444297.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004115 bytes_read=8773856 bytes_retransmit=9 bytes_invalid=0 send_seq=440936 receive_seq=440936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=51.7 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.719 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444298.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004121 bytes_read=8774063 bytes_retransmit=9 bytes_invalid=0 send_seq=440937 receive_seq=440937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004168 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.740 memavail=3619128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444299.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004127 bytes_read=8774256 bytes_retransmit=9 bytes_invalid=0 send_seq=440938 receive_seq=440938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004227 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.760 memavail=3619016 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444300.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004133 bytes_read=8774508 bytes_retransmit=9 bytes_invalid=0 send_seq=440939 receive_seq=440939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004185 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.782 memavail=3619040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444301.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004139 bytes_read=8774715 bytes_retransmit=9 bytes_invalid=0 send_seq=440940 receive_seq=440940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004279 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.10 cputime=3197.804 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444302.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004145 bytes_read=8774908 bytes_retransmit=9 bytes_invalid=0 send_seq=440941 receive_seq=440941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004357 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.825 memavail=3618872 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444303.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004151 bytes_read=8775146 bytes_retransmit=9 bytes_invalid=0 send_seq=440942 receive_seq=440942 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=51.6 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.10 cputime=3197.847 memavail=3619028 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444304.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004157 bytes_read=8775340 bytes_retransmit=9 bytes_invalid=0 send_seq=440943 receive_seq=440943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004178 heater_bed: target=0 temp=51.5 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.09 cputime=3197.869 memavail=3619180 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444305.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004163 bytes_read=8775538 bytes_retransmit=9 bytes_invalid=0 send_seq=440944 receive_seq=440944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004100 heater_bed: target=0 temp=51.5 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.6 pwm=0.000 sysload=1.09 cputime=3197.890 memavail=3619156 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444306.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004169 bytes_read=8775776 bytes_retransmit=9 bytes_invalid=0 send_seq=440945 receive_seq=440945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=51.5 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.09 cputime=3197.913 memavail=3618908 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444307.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004175 bytes_read=8775983 bytes_retransmit=9 bytes_invalid=0 send_seq=440946 receive_seq=440946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004170 heater_bed: target=0 temp=51.5 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.09 cputime=3197.936 memavail=3619108 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444308.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004181 bytes_read=8776176 bytes_retransmit=9 bytes_invalid=0 send_seq=440947 receive_seq=440947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004100 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.09 cputime=3197.956 memavail=3618972 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444309.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004187 bytes_read=8776414 bytes_retransmit=9 bytes_invalid=0 send_seq=440948 receive_seq=440948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004169 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.08 cputime=3197.977 memavail=3619116 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444310.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004193 bytes_read=8776635 bytes_retransmit=9 bytes_invalid=0 send_seq=440949 receive_seq=440949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004102 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.8 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.08 cputime=3197.998 memavail=3618896 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444311.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004199 bytes_read=8776828 bytes_retransmit=9 bytes_invalid=0 send_seq=440950 receive_seq=440950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004015 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.08 cputime=3198.018 memavail=3619040 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444312.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004205 bytes_read=8777066 bytes_retransmit=9 bytes_invalid=0 send_seq=440951 receive_seq=440951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003991 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.08 cputime=3198.040 memavail=3619120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000 | |
| Stats 444313.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004211 bytes_read=8777273 bytes_retransmit=9 bytes_invalid=0 send_seq=440952 receive_seq=440952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003989 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.08 cputime=3198.059 memavail=3619056 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444314.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004217 bytes_read=8777466 bytes_retransmit=9 bytes_invalid=0 send_seq=440953 receive_seq=440953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004072 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.07 cputime=3198.079 memavail=3619136 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444315.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004223 bytes_read=8777718 bytes_retransmit=9 bytes_invalid=0 send_seq=440954 receive_seq=440954 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004124 heater_bed: target=0 temp=51.4 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.07 cputime=3198.101 memavail=3619184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444316.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004229 bytes_read=8777925 bytes_retransmit=9 bytes_invalid=0 send_seq=440955 receive_seq=440955 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004125 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.07 cputime=3198.122 memavail=3619240 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444317.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004235 bytes_read=8778118 bytes_retransmit=9 bytes_invalid=0 send_seq=440956 receive_seq=440956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004031 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.07 cputime=3198.142 memavail=3619216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444318.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004241 bytes_read=8778356 bytes_retransmit=9 bytes_invalid=0 send_seq=440957 receive_seq=440957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.07 cputime=3198.163 memavail=3619128 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444319.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004247 bytes_read=8778563 bytes_retransmit=9 bytes_invalid=0 send_seq=440958 receive_seq=440958 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004061 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.23 cputime=3198.185 memavail=3616216 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444320.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004253 bytes_read=8778770 bytes_retransmit=9 bytes_invalid=0 send_seq=440959 receive_seq=440959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004096 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.23 cputime=3198.205 memavail=3619060 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444321.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004259 bytes_read=8779008 bytes_retransmit=9 bytes_invalid=0 send_seq=440960 receive_seq=440960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=51.3 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.23 cputime=3198.226 memavail=3618932 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444322.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004265 bytes_read=8779215 bytes_retransmit=9 bytes_invalid=0 send_seq=440961 receive_seq=440961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004140 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.23 cputime=3198.248 memavail=3618956 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444323.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004271 bytes_read=8779408 bytes_retransmit=9 bytes_invalid=0 send_seq=440962 receive_seq=440962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004069 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.23 cputime=3198.268 memavail=3619056 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444324.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004277 bytes_read=8779646 bytes_retransmit=9 bytes_invalid=0 send_seq=440963 receive_seq=440963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004040 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.21 cputime=3198.290 memavail=3618976 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444325.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004283 bytes_read=8779867 bytes_retransmit=9 bytes_invalid=0 send_seq=440964 receive_seq=440964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004113 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.21 cputime=3198.313 memavail=3618952 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444326.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004289 bytes_read=8780060 bytes_retransmit=9 bytes_invalid=0 send_seq=440965 receive_seq=440965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004020 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.21 cputime=3198.333 memavail=3618968 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444327.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004295 bytes_read=8780298 bytes_retransmit=9 bytes_invalid=0 send_seq=440966 receive_seq=440966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003937 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.21 cputime=3198.355 memavail=3618988 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444328.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004301 bytes_read=8780492 bytes_retransmit=9 bytes_invalid=0 send_seq=440967 receive_seq=440967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003916 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.7 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.21 cputime=3198.376 memavail=3618980 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444329.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004307 bytes_read=8780677 bytes_retransmit=9 bytes_invalid=0 send_seq=440968 receive_seq=440968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 heater_bed: target=0 temp=51.2 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.19 cputime=3198.398 memavail=3618924 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444330.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004313 bytes_read=8780929 bytes_retransmit=9 bytes_invalid=0 send_seq=440969 receive_seq=440969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003850 heater_bed: target=0 temp=51.1 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.19 cputime=3198.422 memavail=3619020 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444331.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004319 bytes_read=8781136 bytes_retransmit=9 bytes_invalid=0 send_seq=440970 receive_seq=440970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=51.1 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.19 cputime=3198.444 memavail=3618852 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444332.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004325 bytes_read=8781344 bytes_retransmit=9 bytes_invalid=0 send_seq=440971 receive_seq=440971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003940 heater_bed: target=0 temp=51.1 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.19 cputime=3198.464 memavail=3619204 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444333.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004331 bytes_read=8781567 bytes_retransmit=9 bytes_invalid=0 send_seq=440972 receive_seq=440972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=51.1 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.5 pwm=0.000 sysload=1.19 cputime=3198.485 memavail=3619192 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444334.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004337 bytes_read=8781774 bytes_retransmit=9 bytes_invalid=0 send_seq=440973 receive_seq=440973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003868 heater_bed: target=0 temp=51.1 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.18 cputime=3198.506 memavail=3619080 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444335.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004343 bytes_read=8781996 bytes_retransmit=9 bytes_invalid=0 send_seq=440974 receive_seq=440974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003857 heater_bed: target=0 temp=51.0 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.18 cputime=3198.527 memavail=3619288 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000 | |
| Stats 444336.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004355 bytes_read=8782235 bytes_retransmit=9 bytes_invalid=0 send_seq=440976 receive_seq=440976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003713 heater_bed: target=0 temp=51.0 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.18 cputime=3198.548 memavail=3619152 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444337.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004361 bytes_read=8782442 bytes_retransmit=9 bytes_invalid=0 send_seq=440977 receive_seq=440977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003661 heater_bed: target=0 temp=51.0 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.18 cputime=3198.569 memavail=3619048 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444338.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004367 bytes_read=8782650 bytes_retransmit=9 bytes_invalid=0 send_seq=440978 receive_seq=440978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003655 heater_bed: target=0 temp=51.0 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.18 cputime=3198.591 memavail=3619120 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444339.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004373 bytes_read=8782873 bytes_retransmit=9 bytes_invalid=0 send_seq=440979 receive_seq=440979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003656 heater_bed: target=0 temp=50.9 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.16 cputime=3198.612 memavail=3619108 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444340.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004379 bytes_read=8783094 bytes_retransmit=9 bytes_invalid=0 send_seq=440980 receive_seq=440980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003741 heater_bed: target=0 temp=50.9 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.16 cputime=3198.633 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444341.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004385 bytes_read=8783302 bytes_retransmit=9 bytes_invalid=0 send_seq=440981 receive_seq=440981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003773 heater_bed: target=0 temp=50.9 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.16 cputime=3198.653 memavail=3619144 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444342.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004391 bytes_read=8783525 bytes_retransmit=9 bytes_invalid=0 send_seq=440982 receive_seq=440982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003793 heater_bed: target=0 temp=50.9 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.16 cputime=3198.674 memavail=3619232 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444343.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004397 bytes_read=8783732 bytes_retransmit=9 bytes_invalid=0 send_seq=440983 receive_seq=440983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003798 heater_bed: target=0 temp=50.9 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.16 cputime=3198.695 memavail=3619256 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444344.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004403 bytes_read=8783940 bytes_retransmit=9 bytes_invalid=0 send_seq=440984 receive_seq=440984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003843 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.15 cputime=3198.715 memavail=3619176 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444345.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004409 bytes_read=8784177 bytes_retransmit=9 bytes_invalid=0 send_seq=440985 receive_seq=440985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003959 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.6 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.15 cputime=3198.736 memavail=3619168 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000 | |
| Stats 444346.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004415 bytes_read=8784384 bytes_retransmit=9 bytes_invalid=0 send_seq=440986 receive_seq=440986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004022 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.15 cputime=3198.762 memavail=3619132 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444347.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004421 bytes_read=8784592 bytes_retransmit=9 bytes_invalid=0 send_seq=440987 receive_seq=440987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003967 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.15 cputime=3198.782 memavail=3619172 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444348.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004427 bytes_read=8784815 bytes_retransmit=9 bytes_invalid=0 send_seq=440988 receive_seq=440988 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004033 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.15 cputime=3198.802 memavail=3619268 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444349.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004433 bytes_read=8785022 bytes_retransmit=9 bytes_invalid=0 send_seq=440989 receive_seq=440989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004075 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.14 cputime=3198.823 memavail=3619188 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444350.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004439 bytes_read=8785244 bytes_retransmit=9 bytes_invalid=0 send_seq=440990 receive_seq=440990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004129 heater_bed: target=0 temp=50.8 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.4 pwm=0.000 sysload=1.14 cputime=3198.844 memavail=3619124 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444351.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004445 bytes_read=8785464 bytes_retransmit=9 bytes_invalid=0 send_seq=440991 receive_seq=440991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004056 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.14 cputime=3198.866 memavail=3619044 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444352.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004451 bytes_read=8785657 bytes_retransmit=9 bytes_invalid=0 send_seq=440992 receive_seq=440992 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004146 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.14 cputime=3198.886 memavail=3619164 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444353.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004457 bytes_read=8785861 bytes_retransmit=9 bytes_invalid=0 send_seq=440993 receive_seq=440993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.14 cputime=3198.907 memavail=3619212 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444354.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004463 bytes_read=8786084 bytes_retransmit=9 bytes_invalid=0 send_seq=440994 receive_seq=440994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004145 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.13 cputime=3198.928 memavail=3619180 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444355.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004469 bytes_read=8786305 bytes_retransmit=9 bytes_invalid=0 send_seq=440995 receive_seq=440995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004065 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.13 cputime=3198.949 memavail=3619132 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444356.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004475 bytes_read=8786513 bytes_retransmit=9 bytes_invalid=0 send_seq=440996 receive_seq=440996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004003 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.5 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.13 cputime=3198.969 memavail=3619260 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444357.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004481 bytes_read=8786736 bytes_retransmit=9 bytes_invalid=0 send_seq=440997 receive_seq=440997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003925 heater_bed: target=0 temp=50.7 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.13 cputime=3198.990 memavail=3619312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444358.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004487 bytes_read=8786943 bytes_retransmit=9 bytes_invalid=0 send_seq=440998 receive_seq=440998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003868 heater_bed: target=0 temp=50.6 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.13 cputime=3199.011 memavail=3619324 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444359.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004493 bytes_read=8787151 bytes_retransmit=9 bytes_invalid=0 send_seq=440999 receive_seq=440999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003889 heater_bed: target=0 temp=50.6 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.20 cputime=3199.031 memavail=3619396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444360.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004499 bytes_read=8787388 bytes_retransmit=9 bytes_invalid=0 send_seq=441000 receive_seq=441000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=50.6 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.20 cputime=3199.052 memavail=3619200 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444361.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004505 bytes_read=8787595 bytes_retransmit=9 bytes_invalid=0 send_seq=441001 receive_seq=441001 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=50.6 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.20 cputime=3199.074 memavail=3619456 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444362.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004511 bytes_read=8787803 bytes_retransmit=9 bytes_invalid=0 send_seq=441002 receive_seq=441002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 heater_bed: target=0 temp=50.6 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.20 cputime=3199.095 memavail=3619312 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444363.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004517 bytes_read=8788040 bytes_retransmit=9 bytes_invalid=0 send_seq=441003 receive_seq=441003 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003765 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.20 cputime=3199.117 memavail=3619228 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444364.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004523 bytes_read=8788233 bytes_retransmit=9 bytes_invalid=0 send_seq=441004 receive_seq=441004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003806 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.42 cputime=3199.136 memavail=3619196 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444365.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004529 bytes_read=8788455 bytes_retransmit=9 bytes_invalid=0 send_seq=441005 receive_seq=441005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003927 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.42 cputime=3199.157 memavail=3619484 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444366.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004535 bytes_read=8788692 bytes_retransmit=9 bytes_invalid=0 send_seq=441006 receive_seq=441006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004047 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.4 chamber_heater: target=0 temp=36.3 pwm=0.000 sysload=1.42 cputime=3199.179 memavail=3619100 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444367.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004541 bytes_read=8788885 bytes_retransmit=9 bytes_invalid=0 send_seq=441007 receive_seq=441007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004132 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.42 cputime=3199.200 memavail=3619420 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000 | |
| Stats 444368.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004547 bytes_read=8789093 bytes_retransmit=9 bytes_invalid=0 send_seq=441008 receive_seq=441008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004171 heater_bed: target=0 temp=50.5 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.42 cputime=3199.221 memavail=3619404 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444369.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004553 bytes_read=8789330 bytes_retransmit=9 bytes_invalid=0 send_seq=441009 receive_seq=441009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004175 heater_bed: target=0 temp=50.4 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.39 cputime=3199.243 memavail=3619472 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444370.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004559 bytes_read=8789537 bytes_retransmit=9 bytes_invalid=0 send_seq=441010 receive_seq=441010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004189 heater_bed: target=0 temp=50.4 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.39 cputime=3199.265 memavail=3619380 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000 | |
| Stats 444371.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004565 bytes_read=8789745 bytes_retransmit=9 bytes_invalid=0 send_seq=441011 receive_seq=441011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004236 heater_bed: target=0 temp=50.4 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.39 cputime=3199.285 memavail=3619236 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000 | |
| Stats 444372.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004571 bytes_read=8789982 bytes_retransmit=9 bytes_invalid=0 send_seq=441012 receive_seq=441012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=50.4 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.39 cputime=3199.308 memavail=3619252 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444373.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004577 bytes_read=8790175 bytes_retransmit=9 bytes_invalid=0 send_seq=441013 receive_seq=441013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004283 heater_bed: target=0 temp=50.4 pwm=0.000 z_thermal_adjust: temp=36.3 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.39 cputime=3199.329 memavail=3619356 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000 | |
| Stats 444374.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004583 bytes_read=8790383 bytes_retransmit=9 bytes_invalid=0 send_seq=441014 receive_seq=441014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004227 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.52 cputime=3199.351 memavail=3619396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444375.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004589 bytes_read=8790629 bytes_retransmit=9 bytes_invalid=0 send_seq=441015 receive_seq=441015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004213 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.2 pwm=0.000 sysload=1.52 cputime=3199.373 memavail=3619332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444376.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004595 bytes_read=8790809 bytes_retransmit=9 bytes_invalid=0 send_seq=441016 receive_seq=441016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004304 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.52 cputime=3199.394 memavail=3619356 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444377.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004601 bytes_read=8791028 bytes_retransmit=9 bytes_invalid=0 send_seq=441017 receive_seq=441017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004403 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.52 cputime=3199.414 memavail=3619396 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444378.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004607 bytes_read=8791250 bytes_retransmit=9 bytes_invalid=0 send_seq=441018 receive_seq=441018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004315 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.52 cputime=3199.435 memavail=3619276 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000 | |
| Stats 444379.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004613 bytes_read=8791443 bytes_retransmit=9 bytes_invalid=0 send_seq=441019 receive_seq=441019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004394 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.72 cputime=3199.456 memavail=3619316 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444380.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004619 bytes_read=8791680 bytes_retransmit=9 bytes_invalid=0 send_seq=441020 receive_seq=441020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004299 heater_bed: target=0 temp=50.3 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.72 cputime=3199.478 memavail=3619184 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444381.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004625 bytes_read=8791902 bytes_retransmit=9 bytes_invalid=0 send_seq=441021 receive_seq=441021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004246 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.72 cputime=3199.498 memavail=3619424 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000 | |
| Stats 444382.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004631 bytes_read=8792095 bytes_retransmit=9 bytes_invalid=0 send_seq=441022 receive_seq=441022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004202 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.72 cputime=3199.519 memavail=3619384 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444383.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004637 bytes_read=8792318 bytes_retransmit=9 bytes_invalid=0 send_seq=441023 receive_seq=441023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004196 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.72 cputime=3199.541 memavail=3619424 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444384.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004643 bytes_read=8792540 bytes_retransmit=9 bytes_invalid=0 send_seq=441024 receive_seq=441024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004149 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.74 cputime=3199.561 memavail=3619360 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444385.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004649 bytes_read=8792747 bytes_retransmit=9 bytes_invalid=0 send_seq=441025 receive_seq=441025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004104 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.74 cputime=3199.583 memavail=3619400 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000 | |
| Stats 444386.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004655 bytes_read=8792970 bytes_retransmit=9 bytes_invalid=0 send_seq=441026 receive_seq=441026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004023 heater_bed: target=0 temp=50.2 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.74 cputime=3199.605 memavail=3619424 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000 | |
| Stats 444387.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004661 bytes_read=8793192 bytes_retransmit=9 bytes_invalid=0 send_seq=441027 receive_seq=441027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004047 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.74 cputime=3199.625 memavail=3619332 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000 | |
| Stats 444388.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004667 bytes_read=8793385 bytes_retransmit=9 bytes_invalid=0 send_seq=441028 receive_seq=441028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004106 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.74 cputime=3199.648 memavail=3619516 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000 | |
| Stats 444389.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004673 bytes_read=8793623 bytes_retransmit=9 bytes_invalid=0 send_seq=441029 receive_seq=441029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004166 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.84 cputime=3199.670 memavail=3619380 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444390.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004679 bytes_read=8793844 bytes_retransmit=9 bytes_invalid=0 send_seq=441030 receive_seq=441030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004234 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.1 pwm=0.000 sysload=1.84 cputime=3199.691 memavail=3619284 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444391.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004685 bytes_read=8794037 bytes_retransmit=9 bytes_invalid=0 send_seq=441031 receive_seq=441031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=1.84 cputime=3199.712 memavail=3619364 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444392.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004691 bytes_read=8794275 bytes_retransmit=9 bytes_invalid=0 send_seq=441032 receive_seq=441032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004305 heater_bed: target=0 temp=50.1 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=1.84 cputime=3199.733 memavail=3619372 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000 | |
| Stats 444393.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004697 bytes_read=8794482 bytes_retransmit=9 bytes_invalid=0 send_seq=441033 receive_seq=441033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004286 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.2 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=1.84 cputime=3199.754 memavail=3619468 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444394.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004703 bytes_read=8794675 bytes_retransmit=9 bytes_invalid=0 send_seq=441034 receive_seq=441034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004270 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.1 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=2.01 cputime=3199.773 memavail=3619416 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000 | |
| Stats 444395.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004709 bytes_read=8794927 bytes_retransmit=9 bytes_invalid=0 send_seq=441035 receive_seq=441035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.1 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=2.01 cputime=3199.795 memavail=3619392 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444396.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004715 bytes_read=8795134 bytes_retransmit=9 bytes_invalid=0 send_seq=441036 receive_seq=441036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004267 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.1 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=2.01 cputime=3199.816 memavail=3619504 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000 | |
| Stats 444397.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004727 bytes_read=8795343 bytes_retransmit=9 bytes_invalid=0 send_seq=441038 receive_seq=441038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004264 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.1 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=2.01 cputime=3199.838 memavail=3619408 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.5 pwm=0.000 | |
| Stats 444398.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18004733 bytes_read=8795581 bytes_retransmit=9 bytes_invalid=0 send_seq=441039 receive_seq=441039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004295 heater_bed: target=0 temp=50.0 pwm=0.000 z_thermal_adjust: temp=36.1 chamber_heater: target=0 temp=36.0 pwm=0.000 sysload=2.01 cputime=3199.858 memavail=3619368 print_time=14884.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000 | |
| Stats 487807.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269263 bytes_read=18120041 bytes_retransmit=9 bytes_invalid=0 send_seq=485125 receive_seq=485125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004382 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.19 cputime=4072.523 memavail=3618988 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487808.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269269 bytes_read=18120248 bytes_retransmit=9 bytes_invalid=0 send_seq=485126 receive_seq=485126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004457 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.18 cputime=4072.545 memavail=3618616 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487809.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269275 bytes_read=18120455 bytes_retransmit=9 bytes_invalid=0 send_seq=485127 receive_seq=485127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004458 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.18 cputime=4072.565 memavail=3618720 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487810.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269281 bytes_read=18120693 bytes_retransmit=9 bytes_invalid=0 send_seq=485128 receive_seq=485128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004356 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.18 cputime=4072.587 memavail=3618816 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487811.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269287 bytes_read=18120900 bytes_retransmit=9 bytes_invalid=0 send_seq=485129 receive_seq=485129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004307 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.18 cputime=4072.608 memavail=3618648 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487812.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269293 bytes_read=18121093 bytes_retransmit=9 bytes_invalid=0 send_seq=485130 receive_seq=485130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004399 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.18 cputime=4072.628 memavail=3618792 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487813.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269299 bytes_read=18121331 bytes_retransmit=9 bytes_invalid=0 send_seq=485131 receive_seq=485131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4072.651 memavail=3618660 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487814.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269305 bytes_read=18121552 bytes_retransmit=9 bytes_invalid=0 send_seq=485132 receive_seq=485132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004335 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.16 cputime=4072.672 memavail=3618652 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487815.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269311 bytes_read=18121745 bytes_retransmit=9 bytes_invalid=0 send_seq=485133 receive_seq=485133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004331 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4072.689 memavail=3618708 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000 | |
| Stats 487816.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269317 bytes_read=18121983 bytes_retransmit=9 bytes_invalid=0 send_seq=485134 receive_seq=485134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004250 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4072.709 memavail=3618604 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487817.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269323 bytes_read=18122190 bytes_retransmit=9 bytes_invalid=0 send_seq=485135 receive_seq=485135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004194 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4072.734 memavail=3618668 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487818.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269329 bytes_read=18122383 bytes_retransmit=9 bytes_invalid=0 send_seq=485136 receive_seq=485136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004198 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.15 cputime=4072.760 memavail=3618676 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487819.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269335 bytes_read=18122635 bytes_retransmit=9 bytes_invalid=0 send_seq=485137 receive_seq=485137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004220 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.15 cputime=4072.781 memavail=3618704 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487820.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269341 bytes_read=18122842 bytes_retransmit=9 bytes_invalid=0 send_seq=485138 receive_seq=485138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004276 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.15 cputime=4072.802 memavail=3619020 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487821.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269347 bytes_read=18123035 bytes_retransmit=9 bytes_invalid=0 send_seq=485139 receive_seq=485139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004306 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.15 cputime=4072.822 memavail=3619100 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487822.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269353 bytes_read=18123273 bytes_retransmit=9 bytes_invalid=0 send_seq=485140 receive_seq=485140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004297 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.15 cputime=4072.845 memavail=3619060 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487823.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269359 bytes_read=18123480 bytes_retransmit=9 bytes_invalid=0 send_seq=485141 receive_seq=485141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4072.865 memavail=3619012 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487824.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269365 bytes_read=18123687 bytes_retransmit=9 bytes_invalid=0 send_seq=485142 receive_seq=485142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004374 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4072.888 memavail=3619100 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487825.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269371 bytes_read=18123912 bytes_retransmit=9 bytes_invalid=0 send_seq=485143 receive_seq=485143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.14 cputime=4072.910 memavail=3619172 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487826.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269377 bytes_read=18124111 bytes_retransmit=9 bytes_invalid=0 send_seq=485144 receive_seq=485144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004256 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4072.930 memavail=3619092 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487827.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269383 bytes_read=18124304 bytes_retransmit=9 bytes_invalid=0 send_seq=485145 receive_seq=485145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004316 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4072.951 memavail=3619228 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487828.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269389 bytes_read=18124542 bytes_retransmit=9 bytes_invalid=0 send_seq=485146 receive_seq=485146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004299 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4072.975 memavail=3619060 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487829.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269395 bytes_read=18124763 bytes_retransmit=9 bytes_invalid=0 send_seq=485147 receive_seq=485147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004344 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4072.995 memavail=3619164 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487830.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269401 bytes_read=18124956 bytes_retransmit=9 bytes_invalid=0 send_seq=485148 receive_seq=485148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004273 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.015 memavail=3618948 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487831.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269407 bytes_read=18125194 bytes_retransmit=9 bytes_invalid=0 send_seq=485149 receive_seq=485149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004179 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.038 memavail=3619232 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487832.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269413 bytes_read=18125401 bytes_retransmit=9 bytes_invalid=0 send_seq=485150 receive_seq=485150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004213 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.058 memavail=3619248 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487833.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269419 bytes_read=18125594 bytes_retransmit=9 bytes_invalid=0 send_seq=485151 receive_seq=485151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.11 cputime=4073.077 memavail=3619200 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487834.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269425 bytes_read=18125846 bytes_retransmit=9 bytes_invalid=0 send_seq=485152 receive_seq=485152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004327 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.11 cputime=4073.103 memavail=3619120 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487835.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269431 bytes_read=18126053 bytes_retransmit=9 bytes_invalid=0 send_seq=485153 receive_seq=485153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004260 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.11 cputime=4073.128 memavail=3619136 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487836.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269443 bytes_read=18126262 bytes_retransmit=9 bytes_invalid=0 send_seq=485155 receive_seq=485155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004278 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.11 cputime=4073.149 memavail=3619168 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487837.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269449 bytes_read=18126500 bytes_retransmit=9 bytes_invalid=0 send_seq=485156 receive_seq=485156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004271 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.11 cputime=4073.171 memavail=3619316 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000 | |
| Stats 487838.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269455 bytes_read=18126707 bytes_retransmit=9 bytes_invalid=0 send_seq=485157 receive_seq=485157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004243 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.19 cputime=4073.191 memavail=3619300 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487839.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269461 bytes_read=18126914 bytes_retransmit=9 bytes_invalid=0 send_seq=485158 receive_seq=485158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004328 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.19 cputime=4073.210 memavail=3619256 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487840.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269467 bytes_read=18127152 bytes_retransmit=9 bytes_invalid=0 send_seq=485159 receive_seq=485159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004338 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.19 cputime=4073.232 memavail=3619360 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487841.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269473 bytes_read=18127359 bytes_retransmit=9 bytes_invalid=0 send_seq=485160 receive_seq=485160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004294 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.19 cputime=4073.257 memavail=3619224 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487842.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269479 bytes_read=18127552 bytes_retransmit=9 bytes_invalid=0 send_seq=485161 receive_seq=485161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004249 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.19 cputime=4073.276 memavail=3619288 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000 | |
| Stats 487843.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269485 bytes_read=18127790 bytes_retransmit=9 bytes_invalid=0 send_seq=485162 receive_seq=485162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004225 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=4073.299 memavail=3619188 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487845.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269491 bytes_read=18128011 bytes_retransmit=9 bytes_invalid=0 send_seq=485163 receive_seq=485163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004253 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=4073.320 memavail=3619396 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487846.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269497 bytes_read=18128204 bytes_retransmit=9 bytes_invalid=0 send_seq=485164 receive_seq=485164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004167 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=4073.340 memavail=3619388 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487847.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269503 bytes_read=18128442 bytes_retransmit=9 bytes_invalid=0 send_seq=485165 receive_seq=485165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004131 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=4073.362 memavail=3619380 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487848.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269509 bytes_read=18128649 bytes_retransmit=9 bytes_invalid=0 send_seq=485166 receive_seq=485166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004115 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=4073.386 memavail=3619340 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487849.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269515 bytes_read=18128856 bytes_retransmit=9 bytes_invalid=0 send_seq=485167 receive_seq=485167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004033 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4073.405 memavail=3619280 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487850.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269521 bytes_read=18129078 bytes_retransmit=9 bytes_invalid=0 send_seq=485168 receive_seq=485168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004100 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4073.427 memavail=3619404 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487851.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269527 bytes_read=18129280 bytes_retransmit=9 bytes_invalid=0 send_seq=485169 receive_seq=485169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004078 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4073.447 memavail=3619444 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487852.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269533 bytes_read=18129488 bytes_retransmit=9 bytes_invalid=0 send_seq=485170 receive_seq=485170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4073.468 memavail=3619232 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487853.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269539 bytes_read=18129711 bytes_retransmit=9 bytes_invalid=0 send_seq=485171 receive_seq=485171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004127 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.16 cputime=4073.489 memavail=3619168 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487854.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269545 bytes_read=18129918 bytes_retransmit=9 bytes_invalid=0 send_seq=485172 receive_seq=485172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004233 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4073.512 memavail=3619176 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487855.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269551 bytes_read=18130140 bytes_retransmit=9 bytes_invalid=0 send_seq=485173 receive_seq=485173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004251 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.14 cputime=4073.533 memavail=3619336 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487856.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269557 bytes_read=18130363 bytes_retransmit=9 bytes_invalid=0 send_seq=485174 receive_seq=485174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004336 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4073.555 memavail=3619240 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487857.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269563 bytes_read=18130570 bytes_retransmit=9 bytes_invalid=0 send_seq=485175 receive_seq=485175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004385 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4073.576 memavail=3619336 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487858.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269569 bytes_read=18130778 bytes_retransmit=9 bytes_invalid=0 send_seq=485176 receive_seq=485176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004482 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.14 cputime=4073.602 memavail=3619128 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487859.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269575 bytes_read=18131001 bytes_retransmit=9 bytes_invalid=0 send_seq=485177 receive_seq=485177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004559 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.13 cputime=4073.625 memavail=3619296 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000 | |
| Stats 487860.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269581 bytes_read=18131222 bytes_retransmit=9 bytes_invalid=0 send_seq=485178 receive_seq=485178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004594 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.13 cputime=4073.645 memavail=3619280 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487861.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269587 bytes_read=18131430 bytes_retransmit=9 bytes_invalid=0 send_seq=485179 receive_seq=485179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004592 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.13 cputime=4073.666 memavail=3619320 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487862.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269593 bytes_read=18131653 bytes_retransmit=9 bytes_invalid=0 send_seq=485180 receive_seq=485180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004495 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.13 cputime=4073.688 memavail=3619312 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487863.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269599 bytes_read=18131860 bytes_retransmit=9 bytes_invalid=0 send_seq=485181 receive_seq=485181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004438 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.13 cputime=4073.708 memavail=3619200 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000 | |
| Stats 487864.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269605 bytes_read=18132068 bytes_retransmit=9 bytes_invalid=0 send_seq=485182 receive_seq=485182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004522 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.728 memavail=3619208 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000 | |
| Stats 487865.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269611 bytes_read=18132305 bytes_retransmit=9 bytes_invalid=0 send_seq=485183 receive_seq=485183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004582 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.751 memavail=3619056 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487866.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269617 bytes_read=18132512 bytes_retransmit=9 bytes_invalid=0 send_seq=485184 receive_seq=485184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004506 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.770 memavail=3619136 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| Stats 487867.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18269623 bytes_read=18132720 bytes_retransmit=9 bytes_invalid=0 send_seq=485185 receive_seq=485185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004395 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.12 cputime=4073.791 memavail=3619216 print_time=59395.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000 | |
| extruder -> pc - 270/100 | |
| Stats 488685.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274609 bytes_read=18308538 bytes_retransmit=9 bytes_invalid=0 send_seq=486016 receive_seq=486016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004399 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.24 cputime=4090.172 memavail=3619024 print_time=60273.846 buffer_time=0.174 print_stall=0 extruder: target=250 temp=26.5 pwm=0.000 | |
| Heater extruder approaching new target of 250.000 | |
| Stats 488686.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274647 bytes_read=18308785 bytes_retransmit=9 bytes_invalid=0 send_seq=486019 receive_seq=486019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004300 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.24 cputime=4090.196 memavail=3618888 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=26.6 pwm=1.000 | |
| Stats 488687.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274653 bytes_read=18308992 bytes_retransmit=9 bytes_invalid=0 send_seq=486020 receive_seq=486020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004289 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.24 cputime=4090.216 memavail=3619024 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=26.6 pwm=1.000 | |
| Stats 488688.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274659 bytes_read=18309199 bytes_retransmit=9 bytes_invalid=0 send_seq=486021 receive_seq=486021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004272 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.24 cputime=4090.237 memavail=3619120 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=27.1 pwm=1.000 | |
| Stats 488689.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274665 bytes_read=18309437 bytes_retransmit=9 bytes_invalid=0 send_seq=486022 receive_seq=486022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004243 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.22 cputime=4090.259 memavail=3618972 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=27.8 pwm=1.000 | |
| Stats 488690.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274687 bytes_read=18309649 bytes_retransmit=9 bytes_invalid=0 send_seq=486024 receive_seq=486024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.22 cputime=4090.281 memavail=3619152 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=29.4 pwm=1.000 | |
| Stats 488691.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274693 bytes_read=18309842 bytes_retransmit=9 bytes_invalid=0 send_seq=486025 receive_seq=486025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004210 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.22 cputime=4090.302 memavail=3619172 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=30.8 pwm=1.000 | |
| Stats 488692.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274699 bytes_read=18310080 bytes_retransmit=9 bytes_invalid=0 send_seq=486026 receive_seq=486026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004151 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.22 cputime=4090.324 memavail=3619028 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=32.6 pwm=1.000 | |
| Stats 488693.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274705 bytes_read=18310301 bytes_retransmit=9 bytes_invalid=0 send_seq=486027 receive_seq=486027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004068 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.22 cputime=4090.348 memavail=3619172 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=35.4 pwm=1.000 | |
| Stats 488694.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274727 bytes_read=18310499 bytes_retransmit=9 bytes_invalid=0 send_seq=486029 receive_seq=486029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004130 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.37 cputime=4090.369 memavail=3619276 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=37.8 pwm=1.000 | |
| Stats 488695.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274739 bytes_read=18310753 bytes_retransmit=9 bytes_invalid=0 send_seq=486031 receive_seq=486031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004271 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.37 cputime=4090.392 memavail=3619068 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=40.4 pwm=1.000 | |
| Stats 488696.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274745 bytes_read=18310960 bytes_retransmit=9 bytes_invalid=0 send_seq=486032 receive_seq=486032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004293 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.37 cputime=4090.414 memavail=3619172 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=44.2 pwm=1.000 | |
| Stats 488697.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274751 bytes_read=18311153 bytes_retransmit=9 bytes_invalid=0 send_seq=486033 receive_seq=486033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.37 cputime=4090.435 memavail=3619184 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=47.0 pwm=1.000 | |
| Stats 488698.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274773 bytes_read=18311410 bytes_retransmit=9 bytes_invalid=0 send_seq=486035 receive_seq=486035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004426 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.37 cputime=4090.457 memavail=3619128 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=50.0 pwm=1.000 | |
| Stats 488699.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274779 bytes_read=18311617 bytes_retransmit=9 bytes_invalid=0 send_seq=486036 receive_seq=486036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004402 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.42 cputime=4090.477 memavail=3619184 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=54.1 pwm=1.000 | |
| Stats 488700.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274785 bytes_read=18311810 bytes_retransmit=9 bytes_invalid=0 send_seq=486037 receive_seq=486037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004421 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.42 cputime=4090.497 memavail=3619184 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=57.3 pwm=1.000 | |
| Stats 488701.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274791 bytes_read=18312048 bytes_retransmit=9 bytes_invalid=0 send_seq=486038 receive_seq=486038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004434 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.42 cputime=4090.519 memavail=3619184 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=60.6 pwm=1.000 | |
| Stats 488702.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274813 bytes_read=18312260 bytes_retransmit=9 bytes_invalid=0 send_seq=486040 receive_seq=486040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004390 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.42 cputime=4090.541 memavail=3619184 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=64.8 pwm=1.000 | |
| Stats 488703.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274819 bytes_read=18312453 bytes_retransmit=9 bytes_invalid=0 send_seq=486041 receive_seq=486041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004451 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.42 cputime=4090.561 memavail=3619164 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=68.4 pwm=1.000 | |
| Stats 488704.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274825 bytes_read=18312705 bytes_retransmit=9 bytes_invalid=0 send_seq=486042 receive_seq=486042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004538 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4090.583 memavail=3619248 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=71.5 pwm=1.000 | |
| Stats 488705.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274831 bytes_read=18312912 bytes_retransmit=9 bytes_invalid=0 send_seq=486043 receive_seq=486043 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004601 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4090.604 memavail=3619152 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=76.1 pwm=1.000 | |
| Stats 488706.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274837 bytes_read=18313105 bytes_retransmit=9 bytes_invalid=0 send_seq=486044 receive_seq=486044 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004603 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4090.624 memavail=3619216 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=79.4 pwm=1.000 | |
| Stats 488707.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274859 bytes_read=18313348 bytes_retransmit=9 bytes_invalid=0 send_seq=486046 receive_seq=486046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004643 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4090.646 memavail=3619312 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=82.7 pwm=1.000 | |
| Stats 488708.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274865 bytes_read=18313543 bytes_retransmit=9 bytes_invalid=0 send_seq=486047 receive_seq=486047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004616 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4090.668 memavail=3619408 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=87.3 pwm=1.000 | |
| Stats 488709.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274871 bytes_read=18313741 bytes_retransmit=9 bytes_invalid=0 send_seq=486048 receive_seq=486048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004518 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4090.688 memavail=3619324 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=90.7 pwm=1.000 | |
| Stats 488710.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274877 bytes_read=18313979 bytes_retransmit=9 bytes_invalid=0 send_seq=486049 receive_seq=486049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004408 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4090.710 memavail=3619256 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=94.0 pwm=1.000 | |
| Stats 488711.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274899 bytes_read=18314191 bytes_retransmit=9 bytes_invalid=0 send_seq=486051 receive_seq=486051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4090.732 memavail=3619304 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=98.5 pwm=1.000 | |
| Stats 488712.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274905 bytes_read=18314384 bytes_retransmit=9 bytes_invalid=0 send_seq=486052 receive_seq=486052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004384 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4090.752 memavail=3619256 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=102.1 pwm=1.000 | |
| Stats 488713.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274911 bytes_read=18314622 bytes_retransmit=9 bytes_invalid=0 send_seq=486053 receive_seq=486053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004303 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4090.774 memavail=3619344 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=105.3 pwm=1.000 | |
| Stats 488714.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274917 bytes_read=18314843 bytes_retransmit=9 bytes_invalid=0 send_seq=486054 receive_seq=486054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004354 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4090.795 memavail=3619272 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=109.6 pwm=1.000 | |
| Stats 488715.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274939 bytes_read=18315056 bytes_retransmit=9 bytes_invalid=0 send_seq=486056 receive_seq=486056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004386 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4090.817 memavail=3619316 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=113.0 pwm=1.000 | |
| Stats 488716.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274945 bytes_read=18315279 bytes_retransmit=9 bytes_invalid=0 send_seq=486057 receive_seq=486057 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004446 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4090.838 memavail=3616008 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=116.4 pwm=1.000 | |
| Stats 488717.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274951 bytes_read=18315486 bytes_retransmit=9 bytes_invalid=0 send_seq=486058 receive_seq=486058 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004469 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4090.860 memavail=3619456 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=120.8 pwm=1.000 | |
| Stats 488718.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274957 bytes_read=18315694 bytes_retransmit=9 bytes_invalid=0 send_seq=486059 receive_seq=486059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004445 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4090.881 memavail=3619512 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=124.2 pwm=1.000 | |
| Stats 488719.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274979 bytes_read=18315936 bytes_retransmit=9 bytes_invalid=0 send_seq=486061 receive_seq=486061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004374 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.39 cputime=4090.903 memavail=3619592 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=127.3 pwm=1.000 | |
| Stats 488720.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274985 bytes_read=18316143 bytes_retransmit=9 bytes_invalid=0 send_seq=486062 receive_seq=486062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004337 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.39 cputime=4090.925 memavail=3619376 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=131.5 pwm=1.000 | |
| Stats 488721.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274991 bytes_read=18316351 bytes_retransmit=9 bytes_invalid=0 send_seq=486063 receive_seq=486063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004323 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.39 cputime=4090.945 memavail=3619472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=134.7 pwm=1.000 | |
| Stats 488722.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18274997 bytes_read=18316574 bytes_retransmit=9 bytes_invalid=0 send_seq=486064 receive_seq=486064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004227 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.39 cputime=4090.966 memavail=3619384 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=137.6 pwm=1.000 | |
| Stats 488723.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275019 bytes_read=18316786 bytes_retransmit=9 bytes_invalid=0 send_seq=486066 receive_seq=486066 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004228 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.39 cputime=4090.987 memavail=3619320 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=141.4 pwm=1.000 | |
| Stats 488724.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275025 bytes_read=18317008 bytes_retransmit=9 bytes_invalid=0 send_seq=486067 receive_seq=486067 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004164 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.36 cputime=4091.008 memavail=3619432 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=144.5 pwm=1.000 | |
| Stats 488725.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275031 bytes_read=18317231 bytes_retransmit=9 bytes_invalid=0 send_seq=486068 receive_seq=486068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004201 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.36 cputime=4091.029 memavail=3619448 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=147.4 pwm=1.000 | |
| Stats 488726.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275037 bytes_read=18317438 bytes_retransmit=9 bytes_invalid=0 send_seq=486069 receive_seq=486069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004119 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.36 cputime=4091.050 memavail=3619384 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=150.8 pwm=1.000 | |
| Stats 488727.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275043 bytes_read=18317646 bytes_retransmit=9 bytes_invalid=0 send_seq=486070 receive_seq=486070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.36 cputime=4091.070 memavail=3619392 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=153.7 pwm=1.000 | |
| Stats 488728.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275065 bytes_read=18317874 bytes_retransmit=9 bytes_invalid=0 send_seq=486072 receive_seq=486072 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004019 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.36 cputime=4091.090 memavail=3619252 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=156.2 pwm=1.000 | |
| Stats 488729.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275071 bytes_read=18318095 bytes_retransmit=9 bytes_invalid=0 send_seq=486073 receive_seq=486073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004054 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.33 cputime=4091.114 memavail=3619396 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=159.6 pwm=1.000 | |
| Stats 488730.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275077 bytes_read=18318303 bytes_retransmit=9 bytes_invalid=0 send_seq=486074 receive_seq=486074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004091 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.33 cputime=4091.144 memavail=3619400 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=162.1 pwm=1.000 | |
| Stats 488731.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275083 bytes_read=18318526 bytes_retransmit=9 bytes_invalid=0 send_seq=486075 receive_seq=486075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.33 cputime=4091.165 memavail=3619480 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=164.4 pwm=1.000 | |
| Stats 488732.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275105 bytes_read=18318725 bytes_retransmit=9 bytes_invalid=0 send_seq=486077 receive_seq=486077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004227 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.33 cputime=4091.187 memavail=3619400 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=167.8 pwm=1.000 | |
| Stats 488733.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275111 bytes_read=18318924 bytes_retransmit=9 bytes_invalid=0 send_seq=486078 receive_seq=486078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004178 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.33 cputime=4091.206 memavail=3619532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=170.2 pwm=1.000 | |
| Stats 488734.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275117 bytes_read=18319161 bytes_retransmit=9 bytes_invalid=0 send_seq=486079 receive_seq=486079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004201 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4091.228 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=172.5 pwm=1.000 | |
| Stats 488735.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275123 bytes_read=18319368 bytes_retransmit=9 bytes_invalid=0 send_seq=486080 receive_seq=486080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004249 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4091.248 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=175.6 pwm=1.000 | |
| Stats 488736.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275145 bytes_read=18319581 bytes_retransmit=9 bytes_invalid=0 send_seq=486082 receive_seq=486082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004290 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4091.269 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=177.8 pwm=1.000 | |
| Stats 488737.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275151 bytes_read=18319804 bytes_retransmit=9 bytes_invalid=0 send_seq=486083 receive_seq=486083 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004253 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4091.289 memavail=3619260 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=180.2 pwm=1.000 | |
| Stats 488738.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275157 bytes_read=18320011 bytes_retransmit=9 bytes_invalid=0 send_seq=486084 receive_seq=486084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004338 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.38 cputime=4091.310 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=183.1 pwm=1.000 | |
| Stats 488739.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275163 bytes_read=18320233 bytes_retransmit=9 bytes_invalid=0 send_seq=486085 receive_seq=486085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4091.330 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=185.4 pwm=1.000 | |
| Stats 488740.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275185 bytes_read=18320461 bytes_retransmit=9 bytes_invalid=0 send_seq=486087 receive_seq=486087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004322 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.5 pwm=0.000 sysload=2.27 cputime=4091.351 memavail=3619500 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=187.4 pwm=1.000 | |
| Stats 488741.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275191 bytes_read=18320668 bytes_retransmit=9 bytes_invalid=0 send_seq=486088 receive_seq=486088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004337 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4091.372 memavail=3619420 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=190.5 pwm=1.000 | |
| Stats 488742.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275197 bytes_read=18320876 bytes_retransmit=9 bytes_invalid=0 send_seq=486089 receive_seq=486089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004298 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4091.395 memavail=3619380 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=192.6 pwm=1.000 | |
| Stats 488743.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275203 bytes_read=18321099 bytes_retransmit=9 bytes_invalid=0 send_seq=486090 receive_seq=486090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004269 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.27 cputime=4091.417 memavail=3619484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=194.6 pwm=1.000 | |
| Stats 488744.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275225 bytes_read=18321325 bytes_retransmit=9 bytes_invalid=0 send_seq=486092 receive_seq=486092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004228 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.438 memavail=3619436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=197.6 pwm=1.000 | |
| Stats 488745.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275231 bytes_read=18321533 bytes_retransmit=9 bytes_invalid=0 send_seq=486093 receive_seq=486093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004139 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.458 memavail=3619436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=199.6 pwm=1.000 | |
| Stats 488746.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275237 bytes_read=18321756 bytes_retransmit=9 bytes_invalid=0 send_seq=486094 receive_seq=486094 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004202 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.480 memavail=3619436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=201.7 pwm=1.000 | |
| Stats 488747.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275243 bytes_read=18321963 bytes_retransmit=9 bytes_invalid=0 send_seq=486095 receive_seq=486095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004314 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.508 memavail=3619476 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=204.3 pwm=1.000 | |
| Stats 488748.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275249 bytes_read=18322171 bytes_retransmit=9 bytes_invalid=0 send_seq=486096 receive_seq=486096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004306 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.528 memavail=3619436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=206.2 pwm=1.000 | |
| Stats 488749.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275266 bytes_read=18322408 bytes_retransmit=9 bytes_invalid=0 send_seq=486097 receive_seq=486097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004342 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.23 cputime=4091.549 memavail=3619420 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=208.3 pwm=1.000 | |
| Stats 488750.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275272 bytes_read=18322615 bytes_retransmit=9 bytes_invalid=0 send_seq=486098 receive_seq=486098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004271 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.23 cputime=4091.570 memavail=3619436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=210.7 pwm=1.000 | |
| Stats 488751.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275310 bytes_read=18322833 bytes_retransmit=9 bytes_invalid=0 send_seq=486101 receive_seq=486101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004224 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.23 cputime=4091.591 memavail=3619412 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=212.5 pwm=0.856 | |
| Stats 488752.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275364 bytes_read=18323085 bytes_retransmit=9 bytes_invalid=0 send_seq=486105 receive_seq=486105 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004303 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.23 cputime=4091.613 memavail=3619444 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=215.0 pwm=0.680 | |
| Stats 488753.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275402 bytes_read=18323288 bytes_retransmit=9 bytes_invalid=0 send_seq=486108 receive_seq=486108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004335 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.23 cputime=4091.636 memavail=3619444 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=216.9 pwm=0.541 | |
| Stats 488754.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275408 bytes_read=18323510 bytes_retransmit=9 bytes_invalid=0 send_seq=486109 receive_seq=486109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004290 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.21 cputime=4091.657 memavail=3619444 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=218.6 pwm=0.541 | |
| Stats 488755.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275430 bytes_read=18323749 bytes_retransmit=9 bytes_invalid=0 send_seq=486111 receive_seq=486111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004384 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.21 cputime=4091.679 memavail=3619380 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=220.6 pwm=0.474 | |
| Stats 488756.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275458 bytes_read=18323950 bytes_retransmit=9 bytes_invalid=0 send_seq=486114 receive_seq=486114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004553 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.21 cputime=4091.700 memavail=3619444 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=222.2 pwm=0.416 | |
| Stats 488757.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275464 bytes_read=18324153 bytes_retransmit=9 bytes_invalid=0 send_seq=486115 receive_seq=486115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004474 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.21 cputime=4091.719 memavail=3619460 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=223.5 pwm=0.416 | |
| Stats 488758.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275470 bytes_read=18324390 bytes_retransmit=9 bytes_invalid=0 send_seq=486116 receive_seq=486116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004448 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.21 cputime=4091.740 memavail=3619460 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=225.0 pwm=0.416 | |
| Stats 488759.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275476 bytes_read=18324597 bytes_retransmit=9 bytes_invalid=0 send_seq=486117 receive_seq=486117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004401 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.28 cputime=4091.761 memavail=3619492 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=226.4 pwm=0.416 | |
| Stats 488760.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275498 bytes_read=18324810 bytes_retransmit=9 bytes_invalid=0 send_seq=486119 receive_seq=486119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004314 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.28 cputime=4091.782 memavail=3619472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=227.1 pwm=0.476 | |
| Stats 488761.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275504 bytes_read=18325047 bytes_retransmit=9 bytes_invalid=0 send_seq=486120 receive_seq=486120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004247 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.28 cputime=4091.804 memavail=3619408 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=227.8 pwm=0.535 | |
| Stats 488762.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275526 bytes_read=18325245 bytes_retransmit=9 bytes_invalid=0 send_seq=486122 receive_seq=486122 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.28 cputime=4091.824 memavail=3619472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=228.5 pwm=0.535 | |
| Stats 488763.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275532 bytes_read=18325468 bytes_retransmit=9 bytes_invalid=0 send_seq=486123 receive_seq=486123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004245 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.28 cputime=4091.844 memavail=3619524 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=229.3 pwm=0.535 | |
| Stats 488764.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275538 bytes_read=18325704 bytes_retransmit=9 bytes_invalid=0 send_seq=486124 receive_seq=486124 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004329 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.25 cputime=4091.865 memavail=3619476 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=229.7 pwm=0.535 | |
| Stats 488765.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275560 bytes_read=18325902 bytes_retransmit=9 bytes_invalid=0 send_seq=486126 receive_seq=486126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004266 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.886 memavail=3619572 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=229.8 pwm=0.607 | |
| Stats 488766.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275566 bytes_read=18326125 bytes_retransmit=9 bytes_invalid=0 send_seq=486127 receive_seq=486127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004330 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.906 memavail=3619476 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=230.3 pwm=0.607 | |
| Stats 488767.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275572 bytes_read=18326347 bytes_retransmit=9 bytes_invalid=0 send_seq=486128 receive_seq=486128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004419 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.928 memavail=3619596 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=230.7 pwm=0.607 | |
| Stats 488768.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275578 bytes_read=18326540 bytes_retransmit=9 bytes_invalid=0 send_seq=486129 receive_seq=486129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004467 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.25 cputime=4091.948 memavail=3619596 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=231.0 pwm=0.607 | |
| Stats 488769.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275600 bytes_read=18326782 bytes_retransmit=9 bytes_invalid=0 send_seq=486131 receive_seq=486131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004420 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.15 cputime=4091.969 memavail=3619644 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=231.3 pwm=0.634 | |
| Stats 488770.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275606 bytes_read=18327004 bytes_retransmit=9 bytes_invalid=0 send_seq=486132 receive_seq=486132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004334 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.15 cputime=4091.989 memavail=3619628 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=231.8 pwm=0.634 | |
| Stats 488771.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275612 bytes_read=18327197 bytes_retransmit=9 bytes_invalid=0 send_seq=486133 receive_seq=486133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004240 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.15 cputime=4092.010 memavail=3619628 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=232.0 pwm=0.634 | |
| Stats 488772.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275618 bytes_read=18327420 bytes_retransmit=9 bytes_invalid=0 send_seq=486134 receive_seq=486134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004295 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.15 cputime=4092.030 memavail=3619628 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=232.2 pwm=0.634 | |
| Stats 488773.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275624 bytes_read=18327642 bytes_retransmit=9 bytes_invalid=0 send_seq=486135 receive_seq=486135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004248 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.15 cputime=4092.053 memavail=3619764 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=232.6 pwm=0.626 | |
| Stats 488774.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275646 bytes_read=18327854 bytes_retransmit=9 bytes_invalid=0 send_seq=486137 receive_seq=486137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004171 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.06 cputime=4092.072 memavail=3619628 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=232.9 pwm=0.626 | |
| Stats 488775.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275652 bytes_read=18328077 bytes_retransmit=9 bytes_invalid=0 send_seq=486138 receive_seq=486138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004145 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.06 cputime=4092.093 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=233.2 pwm=0.626 | |
| Stats 488776.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275658 bytes_read=18328299 bytes_retransmit=9 bytes_invalid=0 send_seq=486139 receive_seq=486139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004180 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.06 cputime=4092.114 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=233.5 pwm=0.626 | |
| Stats 488777.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275664 bytes_read=18328492 bytes_retransmit=9 bytes_invalid=0 send_seq=486140 receive_seq=486140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004203 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.06 cputime=4092.134 memavail=3619560 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=233.8 pwm=0.626 | |
| Stats 488778.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275686 bytes_read=18328735 bytes_retransmit=9 bytes_invalid=0 send_seq=486142 receive_seq=486142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004244 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.06 cputime=4092.155 memavail=3619672 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=234.3 pwm=0.598 | |
| Stats 488779.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275692 bytes_read=18328952 bytes_retransmit=9 bytes_invalid=0 send_seq=486143 receive_seq=486143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004268 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.14 cputime=4092.175 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=234.7 pwm=0.598 | |
| Stats 488780.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275698 bytes_read=18329132 bytes_retransmit=9 bytes_invalid=0 send_seq=486144 receive_seq=486144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004272 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.14 cputime=4092.196 memavail=3619644 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=234.9 pwm=0.598 | |
| Stats 488781.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275704 bytes_read=18329366 bytes_retransmit=9 bytes_invalid=0 send_seq=486145 receive_seq=486145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004280 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.14 cputime=4092.217 memavail=3619636 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=235.1 pwm=0.598 | |
| Stats 488782.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275726 bytes_read=18329578 bytes_retransmit=9 bytes_invalid=0 send_seq=486147 receive_seq=486147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004337 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.14 cputime=4092.238 memavail=3619748 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=235.6 pwm=0.599 | |
| Heater extruder within range of 250.000 | |
| Stats 488783.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275732 bytes_read=18329771 bytes_retransmit=9 bytes_invalid=0 send_seq=486148 receive_seq=486148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004345 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.14 cputime=4092.258 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=235.8 pwm=0.599 | |
| Stats 488784.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275738 bytes_read=18330023 bytes_retransmit=9 bytes_invalid=0 send_seq=486149 receive_seq=486149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.12 cputime=4092.279 memavail=3619700 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=236.0 pwm=0.599 | |
| Stats 488785.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275744 bytes_read=18330230 bytes_retransmit=9 bytes_invalid=0 send_seq=486150 receive_seq=486150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.12 cputime=4092.301 memavail=3619708 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=236.7 pwm=0.599 | |
| Stats 488786.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275766 bytes_read=18330428 bytes_retransmit=9 bytes_invalid=0 send_seq=486152 receive_seq=486152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.12 cputime=4092.321 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=236.8 pwm=0.560 | |
| Stats 488787.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275772 bytes_read=18330666 bytes_retransmit=9 bytes_invalid=0 send_seq=486153 receive_seq=486153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004303 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.12 cputime=4092.342 memavail=3619624 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=237.0 pwm=0.560 | |
| Stats 488788.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275778 bytes_read=18330873 bytes_retransmit=9 bytes_invalid=0 send_seq=486154 receive_seq=486154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004350 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.12 cputime=4092.362 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=237.3 pwm=0.560 | |
| Stats 488789.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275784 bytes_read=18331080 bytes_retransmit=9 bytes_invalid=0 send_seq=486155 receive_seq=486155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004282 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.11 cputime=4092.383 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=237.5 pwm=0.560 | |
| Stats 488790.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275806 bytes_read=18331323 bytes_retransmit=9 bytes_invalid=0 send_seq=486157 receive_seq=486157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004247 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.11 cputime=4092.405 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=237.8 pwm=0.574 | |
| Stats 488791.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275812 bytes_read=18331530 bytes_retransmit=9 bytes_invalid=0 send_seq=486158 receive_seq=486158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004157 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.11 cputime=4092.426 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.0 pwm=0.574 | |
| Stats 488792.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275818 bytes_read=18331723 bytes_retransmit=9 bytes_invalid=0 send_seq=486159 receive_seq=486159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004242 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.11 cputime=4092.446 memavail=3619672 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.2 pwm=0.574 | |
| Stats 488793.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275824 bytes_read=18331961 bytes_retransmit=9 bytes_invalid=0 send_seq=486160 receive_seq=486160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004192 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.11 cputime=4092.467 memavail=3619688 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.3 pwm=0.574 | |
| Stats 488794.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275830 bytes_read=18332182 bytes_retransmit=9 bytes_invalid=0 send_seq=486161 receive_seq=486161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004141 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.02 cputime=4092.487 memavail=3619680 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.8 pwm=0.570 | |
| Stats 488795.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275852 bytes_read=18332380 bytes_retransmit=9 bytes_invalid=0 send_seq=486163 receive_seq=486163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004095 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.02 cputime=4092.506 memavail=3619680 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.7 pwm=0.570 | |
| Stats 488796.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275858 bytes_read=18332618 bytes_retransmit=9 bytes_invalid=0 send_seq=486164 receive_seq=486164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004129 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=2.02 cputime=4092.528 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.0 pwm=0.570 | |
| Stats 488797.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275864 bytes_read=18332825 bytes_retransmit=9 bytes_invalid=0 send_seq=486165 receive_seq=486165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004210 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.02 cputime=4092.549 memavail=3619616 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.2 pwm=0.570 | |
| Stats 488798.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275870 bytes_read=18333018 bytes_retransmit=9 bytes_invalid=0 send_seq=486166 receive_seq=486166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004285 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=2.02 cputime=4092.569 memavail=3619680 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.5 pwm=0.570 | |
| Stats 488799.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275892 bytes_read=18333275 bytes_retransmit=9 bytes_invalid=0 send_seq=486168 receive_seq=486168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004369 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.94 cputime=4092.591 memavail=3619868 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.4 pwm=0.581 | |
| Stats 488800.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275898 bytes_read=18333482 bytes_retransmit=9 bytes_invalid=0 send_seq=486169 receive_seq=486169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004297 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.94 cputime=4092.612 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.6 pwm=0.581 | |
| Stats 488801.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275904 bytes_read=18333675 bytes_retransmit=9 bytes_invalid=0 send_seq=486170 receive_seq=486170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004295 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.94 cputime=4092.634 memavail=3619792 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.8 pwm=0.581 | |
| Stats 488802.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275910 bytes_read=18333913 bytes_retransmit=9 bytes_invalid=0 send_seq=486171 receive_seq=486171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004252 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.94 cputime=4092.667 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=239.9 pwm=0.581 | |
| Stats 488803.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275932 bytes_read=18334118 bytes_retransmit=9 bytes_invalid=0 send_seq=486173 receive_seq=486173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004206 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.94 cputime=4092.688 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.0 pwm=0.589 | |
| Stats 488804.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275938 bytes_read=18334312 bytes_retransmit=9 bytes_invalid=0 send_seq=486174 receive_seq=486174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004141 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.87 cputime=4092.707 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.3 pwm=0.589 | |
| Stats 488805.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275944 bytes_read=18334547 bytes_retransmit=9 bytes_invalid=0 send_seq=486175 receive_seq=486175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.87 cputime=4092.728 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.0 pwm=0.589 | |
| Stats 488806.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275950 bytes_read=18334754 bytes_retransmit=9 bytes_invalid=0 send_seq=486176 receive_seq=486176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004052 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.87 cputime=4092.749 memavail=3619600 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.2 pwm=0.589 | |
| Stats 488807.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275972 bytes_read=18334952 bytes_retransmit=9 bytes_invalid=0 send_seq=486178 receive_seq=486178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004036 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.87 cputime=4092.769 memavail=3619716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.6 pwm=0.590 | |
| Stats 488808.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275978 bytes_read=18335190 bytes_retransmit=9 bytes_invalid=0 send_seq=486179 receive_seq=486179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003982 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.87 cputime=4092.790 memavail=3619716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.7 pwm=0.590 | |
| Stats 488809.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275984 bytes_read=18335411 bytes_retransmit=9 bytes_invalid=0 send_seq=486180 receive_seq=486180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003911 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.88 cputime=4092.811 memavail=3619684 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.9 pwm=0.590 | |
| Stats 488810.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18275990 bytes_read=18335604 bytes_retransmit=9 bytes_invalid=0 send_seq=486181 receive_seq=486181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.88 cputime=4092.830 memavail=3619680 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.8 pwm=0.590 | |
| Stats 488811.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276012 bytes_read=18335847 bytes_retransmit=9 bytes_invalid=0 send_seq=486183 receive_seq=486183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004045 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.88 cputime=4092.851 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.2 pwm=0.571 | |
| Stats 488812.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276018 bytes_read=18336054 bytes_retransmit=9 bytes_invalid=0 send_seq=486184 receive_seq=486184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004119 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.88 cputime=4092.871 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.4 pwm=0.571 | |
| Stats 488813.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276024 bytes_read=18336247 bytes_retransmit=9 bytes_invalid=0 send_seq=486185 receive_seq=486185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.88 cputime=4092.892 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.8 pwm=0.571 | |
| Stats 488814.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276030 bytes_read=18336499 bytes_retransmit=9 bytes_invalid=0 send_seq=486186 receive_seq=486186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004218 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4092.914 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.7 pwm=0.571 | |
| Stats 488815.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276052 bytes_read=18336711 bytes_retransmit=9 bytes_invalid=0 send_seq=486188 receive_seq=486188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004182 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4092.935 memavail=3619596 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.9 pwm=0.565 | |
| Stats 488816.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276064 bytes_read=18336904 bytes_retransmit=9 bytes_invalid=0 send_seq=486190 receive_seq=486189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004251 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.97 cputime=4092.955 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.9 pwm=0.565 | |
| Stats 488817.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276070 bytes_read=18337158 bytes_retransmit=9 bytes_invalid=0 send_seq=486191 receive_seq=486191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004240 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.97 cputime=4092.975 memavail=3619736 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=241.9 pwm=0.565 | |
| Stats 488818.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276076 bytes_read=18337365 bytes_retransmit=9 bytes_invalid=0 send_seq=486192 receive_seq=486192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004321 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4092.998 memavail=3619720 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.1 pwm=0.565 | |
| Stats 488819.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276082 bytes_read=18337572 bytes_retransmit=9 bytes_invalid=0 send_seq=486193 receive_seq=486193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004299 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4093.019 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.0 pwm=0.565 | |
| Stats 488820.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276104 bytes_read=18337815 bytes_retransmit=9 bytes_invalid=0 send_seq=486195 receive_seq=486195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4093.040 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.3 pwm=0.594 | |
| Stats 488821.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276110 bytes_read=18338022 bytes_retransmit=9 bytes_invalid=0 send_seq=486196 receive_seq=486196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004302 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4093.061 memavail=3619684 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.5 pwm=0.594 | |
| Stats 488822.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276116 bytes_read=18338215 bytes_retransmit=9 bytes_invalid=0 send_seq=486197 receive_seq=486197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004337 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.97 cputime=4093.080 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.5 pwm=0.594 | |
| Stats 488823.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276122 bytes_read=18338453 bytes_retransmit=9 bytes_invalid=0 send_seq=486198 receive_seq=486198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004306 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.97 cputime=4093.100 memavail=3619632 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.6 pwm=0.594 | |
| Stats 488824.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276144 bytes_read=18338679 bytes_retransmit=9 bytes_invalid=0 send_seq=486200 receive_seq=486200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004226 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.89 cputime=4093.120 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.5 pwm=0.570 | |
| Stats 488825.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276150 bytes_read=18338872 bytes_retransmit=9 bytes_invalid=0 send_seq=486201 receive_seq=486201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.89 cputime=4093.139 memavail=3619608 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.7 pwm=0.570 | |
| Stats 488826.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276156 bytes_read=18339110 bytes_retransmit=9 bytes_invalid=0 send_seq=486202 receive_seq=486202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004301 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.89 cputime=4093.159 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.8 pwm=0.570 | |
| Stats 488827.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276162 bytes_read=18339308 bytes_retransmit=9 bytes_invalid=0 send_seq=486203 receive_seq=486203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004401 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.89 cputime=4093.179 memavail=3619688 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.0 pwm=0.570 | |
| Stats 488828.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276184 bytes_read=18339493 bytes_retransmit=9 bytes_invalid=0 send_seq=486205 receive_seq=486205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004434 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.5 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.89 cputime=4093.199 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=242.8 pwm=0.594 | |
| Stats 488829.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276190 bytes_read=18339745 bytes_retransmit=9 bytes_invalid=0 send_seq=486206 receive_seq=486206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004475 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.82 cputime=4093.220 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.2 pwm=0.594 | |
| Stats 488830.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276196 bytes_read=18339952 bytes_retransmit=9 bytes_invalid=0 send_seq=486207 receive_seq=486207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004528 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.82 cputime=4093.244 memavail=3619868 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.2 pwm=0.594 | |
| Stats 488831.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276202 bytes_read=18340145 bytes_retransmit=9 bytes_invalid=0 send_seq=486208 receive_seq=486208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004470 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.82 cputime=4093.272 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.2 pwm=0.594 | |
| Stats 488832.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276219 bytes_read=18340383 bytes_retransmit=9 bytes_invalid=0 send_seq=486209 receive_seq=486209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004490 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.82 cputime=4093.293 memavail=3619924 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.2 pwm=0.599 | |
| Stats 488833.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276225 bytes_read=18340590 bytes_retransmit=9 bytes_invalid=0 send_seq=486210 receive_seq=486210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004516 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.82 cputime=4093.314 memavail=3619892 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.3 pwm=0.599 | |
| Stats 488834.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276231 bytes_read=18340797 bytes_retransmit=9 bytes_invalid=0 send_seq=486211 receive_seq=486211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004526 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.75 cputime=4093.334 memavail=3619892 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.3 pwm=0.599 | |
| Stats 488835.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276237 bytes_read=18341035 bytes_retransmit=9 bytes_invalid=0 send_seq=486212 receive_seq=486212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004564 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.75 cputime=4093.355 memavail=3619908 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.4 pwm=0.599 | |
| Stats 488836.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276259 bytes_read=18341247 bytes_retransmit=9 bytes_invalid=0 send_seq=486214 receive_seq=486214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004646 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.75 cputime=4093.376 memavail=3619908 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.6 pwm=0.584 | |
| Stats 488837.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276265 bytes_read=18341440 bytes_retransmit=9 bytes_invalid=0 send_seq=486215 receive_seq=486215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004697 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.75 cputime=4093.399 memavail=3614876 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.7 pwm=0.584 | |
| Stats 488838.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276271 bytes_read=18341678 bytes_retransmit=9 bytes_invalid=0 send_seq=486216 receive_seq=486216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004604 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.75 cputime=4093.420 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.9 pwm=0.584 | |
| Stats 488839.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276277 bytes_read=18341899 bytes_retransmit=9 bytes_invalid=0 send_seq=486217 receive_seq=486217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004495 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.77 cputime=4093.441 memavail=3619536 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.9 pwm=0.584 | |
| Stats 488840.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276283 bytes_read=18342107 bytes_retransmit=9 bytes_invalid=0 send_seq=486218 receive_seq=486218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004398 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.77 cputime=4093.461 memavail=3619660 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.2 pwm=0.584 | |
| Stats 488841.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276305 bytes_read=18342335 bytes_retransmit=9 bytes_invalid=0 send_seq=486220 receive_seq=486220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004485 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.77 cputime=4093.483 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.1 pwm=0.580 | |
| Stats 488842.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276311 bytes_read=18342542 bytes_retransmit=9 bytes_invalid=0 send_seq=486221 receive_seq=486221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004511 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.77 cputime=4093.503 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.4 pwm=0.580 | |
| Stats 488843.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276317 bytes_read=18342750 bytes_retransmit=9 bytes_invalid=0 send_seq=486222 receive_seq=486222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004410 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.77 cputime=4093.524 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.4 pwm=0.580 | |
| Stats 488844.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276323 bytes_read=18342987 bytes_retransmit=9 bytes_invalid=0 send_seq=486223 receive_seq=486223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004355 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.71 cputime=4093.545 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.6 pwm=0.580 | |
| Stats 488845.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276345 bytes_read=18343199 bytes_retransmit=9 bytes_invalid=0 send_seq=486225 receive_seq=486225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004334 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.71 cputime=4093.567 memavail=3619500 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.7 pwm=0.590 | |
| Stats 488846.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276351 bytes_read=18343407 bytes_retransmit=9 bytes_invalid=0 send_seq=486226 receive_seq=486226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.71 cputime=4093.587 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.7 pwm=0.590 | |
| Stats 488847.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276357 bytes_read=18343630 bytes_retransmit=9 bytes_invalid=0 send_seq=486227 receive_seq=486227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004410 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.71 cputime=4093.607 memavail=3619756 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.9 pwm=0.590 | |
| Stats 488848.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276363 bytes_read=18343837 bytes_retransmit=9 bytes_invalid=0 send_seq=486228 receive_seq=486228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004459 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.71 cputime=4093.627 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.8 pwm=0.590 | |
| Stats 488849.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276385 bytes_read=18344064 bytes_retransmit=9 bytes_invalid=0 send_seq=486230 receive_seq=486230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004385 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.74 cputime=4093.653 memavail=3619660 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=244.9 pwm=0.603 | |
| Stats 488850.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276391 bytes_read=18344287 bytes_retransmit=9 bytes_invalid=0 send_seq=486231 receive_seq=486231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004361 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.74 cputime=4093.673 memavail=3619680 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.0 pwm=0.603 | |
| Stats 488851.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276397 bytes_read=18344485 bytes_retransmit=9 bytes_invalid=0 send_seq=486232 receive_seq=486232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004373 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.74 cputime=4093.694 memavail=3619684 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.0 pwm=0.603 | |
| Stats 488852.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276403 bytes_read=18344681 bytes_retransmit=9 bytes_invalid=0 send_seq=486233 receive_seq=486233 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004464 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.74 cputime=4093.715 memavail=3619644 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.0 pwm=0.603 | |
| Stats 488853.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276425 bytes_read=18344909 bytes_retransmit=9 bytes_invalid=0 send_seq=486235 receive_seq=486235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004370 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.74 cputime=4093.736 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.1 pwm=0.590 | |
| Stats 488854.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276431 bytes_read=18345130 bytes_retransmit=9 bytes_invalid=0 send_seq=486236 receive_seq=486236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004399 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.68 cputime=4093.756 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.1 pwm=0.590 | |
| Stats 488855.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276437 bytes_read=18345338 bytes_retransmit=9 bytes_invalid=0 send_seq=486237 receive_seq=486237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004449 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.68 cputime=4093.777 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.2 pwm=0.590 | |
| Stats 488856.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276443 bytes_read=18345561 bytes_retransmit=9 bytes_invalid=0 send_seq=486238 receive_seq=486238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004384 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.68 cputime=4093.797 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.2 pwm=0.590 | |
| Stats 488857.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276465 bytes_read=18345773 bytes_retransmit=9 bytes_invalid=0 send_seq=486240 receive_seq=486240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004307 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.68 cputime=4093.819 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.5 pwm=0.574 | |
| Stats 488858.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276471 bytes_read=18345981 bytes_retransmit=9 bytes_invalid=0 send_seq=486241 receive_seq=486241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.68 cputime=4093.838 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.7 pwm=0.574 | |
| Stats 488859.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276477 bytes_read=18346218 bytes_retransmit=9 bytes_invalid=0 send_seq=486242 receive_seq=486242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004274 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.62 cputime=4093.859 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.8 pwm=0.574 | |
| Stats 488860.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276483 bytes_read=18346425 bytes_retransmit=9 bytes_invalid=0 send_seq=486243 receive_seq=486243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004242 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.62 cputime=4093.879 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.8 pwm=0.574 | |
| Stats 488861.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276489 bytes_read=18346633 bytes_retransmit=9 bytes_invalid=0 send_seq=486244 receive_seq=486244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.62 cputime=4093.903 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.8 pwm=0.574 | |
| Stats 488862.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276511 bytes_read=18346861 bytes_retransmit=9 bytes_invalid=0 send_seq=486246 receive_seq=486246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.62 cputime=4093.931 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.9 pwm=0.584 | |
| Stats 488863.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276517 bytes_read=18347068 bytes_retransmit=9 bytes_invalid=0 send_seq=486247 receive_seq=486247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004214 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.62 cputime=4093.952 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.9 pwm=0.584 | |
| Stats 488864.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276523 bytes_read=18347290 bytes_retransmit=9 bytes_invalid=0 send_seq=486248 receive_seq=486248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.57 cputime=4093.972 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.0 pwm=0.584 | |
| Stats 488865.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276529 bytes_read=18347513 bytes_retransmit=9 bytes_invalid=0 send_seq=486249 receive_seq=486249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004239 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.57 cputime=4093.990 memavail=3619712 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.4 pwm=0.584 | |
| Stats 488866.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276551 bytes_read=18347725 bytes_retransmit=9 bytes_invalid=0 send_seq=486251 receive_seq=486251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.57 cputime=4094.011 memavail=3619808 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.2 pwm=0.572 | |
| Stats 488867.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276557 bytes_read=18347933 bytes_retransmit=9 bytes_invalid=0 send_seq=486252 receive_seq=486252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004087 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.57 cputime=4094.031 memavail=3619712 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.4 pwm=0.572 | |
| Stats 488868.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276563 bytes_read=18348156 bytes_retransmit=9 bytes_invalid=0 send_seq=486253 receive_seq=486253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004091 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.57 cputime=4094.051 memavail=3619752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.5 pwm=0.572 | |
| Stats 488869.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276569 bytes_read=18348377 bytes_retransmit=9 bytes_invalid=0 send_seq=486254 receive_seq=486254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004103 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.61 cputime=4094.073 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.4 pwm=0.572 | |
| Stats 488870.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276591 bytes_read=18348590 bytes_retransmit=9 bytes_invalid=0 send_seq=486256 receive_seq=486256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004086 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.61 cputime=4094.093 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.6 pwm=0.586 | |
| Stats 488871.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276597 bytes_read=18348813 bytes_retransmit=9 bytes_invalid=0 send_seq=486257 receive_seq=486257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004163 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.61 cputime=4094.114 memavail=3619676 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.6 pwm=0.586 | |
| Stats 488872.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276603 bytes_read=18349020 bytes_retransmit=9 bytes_invalid=0 send_seq=486258 receive_seq=486258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004215 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.61 cputime=4094.134 memavail=3619668 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.5 pwm=0.586 | |
| Stats 488873.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276609 bytes_read=18349228 bytes_retransmit=9 bytes_invalid=0 send_seq=486259 receive_seq=486259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004152 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.61 cputime=4094.153 memavail=3619740 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.6 pwm=0.586 | |
| Stats 488874.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276631 bytes_read=18349470 bytes_retransmit=9 bytes_invalid=0 send_seq=486261 receive_seq=486261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004224 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.56 cputime=4094.174 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.6 pwm=0.602 | |
| Stats 488875.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276637 bytes_read=18349665 bytes_retransmit=9 bytes_invalid=0 send_seq=486262 receive_seq=486262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004191 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.56 cputime=4094.196 memavail=3619740 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.8 pwm=0.602 | |
| Stats 488876.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276643 bytes_read=18349864 bytes_retransmit=9 bytes_invalid=0 send_seq=486263 receive_seq=486263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004141 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.56 cputime=4094.217 memavail=3619716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.602 | |
| Stats 488877.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276649 bytes_read=18350087 bytes_retransmit=9 bytes_invalid=0 send_seq=486264 receive_seq=486264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004152 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.56 cputime=4094.238 memavail=3619800 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.602 | |
| Stats 488878.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276677 bytes_read=18350315 bytes_retransmit=9 bytes_invalid=0 send_seq=486267 receive_seq=486267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004156 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.56 cputime=4094.259 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.596 | |
| Stats 488879.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276683 bytes_read=18350537 bytes_retransmit=9 bytes_invalid=0 send_seq=486268 receive_seq=486268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004147 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.279 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.596 | |
| Stats 488880.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276689 bytes_read=18350774 bytes_retransmit=9 bytes_invalid=0 send_seq=486269 receive_seq=486269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004092 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.301 memavail=3619792 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.596 | |
| Stats 488881.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276695 bytes_read=18350967 bytes_retransmit=9 bytes_invalid=0 send_seq=486270 receive_seq=486270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004078 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.51 cputime=4094.321 memavail=3619744 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.596 | |
| Stats 488882.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276701 bytes_read=18351175 bytes_retransmit=9 bytes_invalid=0 send_seq=486271 receive_seq=486271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004146 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.341 memavail=3619864 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.596 | |
| Stats 488883.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276723 bytes_read=18351417 bytes_retransmit=9 bytes_invalid=0 send_seq=486273 receive_seq=486273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004063 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.362 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.1 pwm=0.594 | |
| Stats 488884.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276729 bytes_read=18351624 bytes_retransmit=9 bytes_invalid=0 send_seq=486274 receive_seq=486274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003987 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.55 cputime=4094.382 memavail=3619920 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.0 pwm=0.594 | |
| Stats 488885.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276735 bytes_read=18351832 bytes_retransmit=9 bytes_invalid=0 send_seq=486275 receive_seq=486275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.55 cputime=4094.402 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.0 pwm=0.594 | |
| Stats 488886.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276741 bytes_read=18352069 bytes_retransmit=9 bytes_invalid=0 send_seq=486276 receive_seq=486276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003988 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.55 cputime=4094.423 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.2 pwm=0.594 | |
| Stats 488887.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276763 bytes_read=18352267 bytes_retransmit=9 bytes_invalid=0 send_seq=486278 receive_seq=486278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003959 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.55 cputime=4094.444 memavail=3619808 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.1 pwm=0.591 | |
| Stats 488888.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276769 bytes_read=18352475 bytes_retransmit=9 bytes_invalid=0 send_seq=486279 receive_seq=486279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003949 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.55 cputime=4094.464 memavail=3619880 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.3 pwm=0.591 | |
| Stats 488889.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276775 bytes_read=18352726 bytes_retransmit=9 bytes_invalid=0 send_seq=486280 receive_seq=486280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004010 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.51 cputime=4094.485 memavail=3619776 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.5 pwm=0.591 | |
| Stats 488890.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276781 bytes_read=18352919 bytes_retransmit=9 bytes_invalid=0 send_seq=486281 receive_seq=486281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004079 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.508 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.5 pwm=0.591 | |
| Stats 488891.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276803 bytes_read=18353147 bytes_retransmit=9 bytes_invalid=0 send_seq=486283 receive_seq=486283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004082 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.51 cputime=4094.529 memavail=3619672 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.6 pwm=0.591 | |
| Stats 488892.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276809 bytes_read=18353369 bytes_retransmit=9 bytes_invalid=0 send_seq=486284 receive_seq=486284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004185 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.550 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.6 pwm=0.591 | |
| Stats 488893.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276815 bytes_read=18353562 bytes_retransmit=9 bytes_invalid=0 send_seq=486285 receive_seq=486285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004215 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.51 cputime=4094.570 memavail=3619872 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.7 pwm=0.591 | |
| Stats 488894.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276821 bytes_read=18353799 bytes_retransmit=9 bytes_invalid=0 send_seq=486286 receive_seq=486286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004224 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.47 cputime=4094.593 memavail=3619840 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.7 pwm=0.591 | |
| Stats 488895.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276838 bytes_read=18354021 bytes_retransmit=9 bytes_invalid=0 send_seq=486287 receive_seq=486287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.47 cputime=4094.614 memavail=3619920 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.9 pwm=0.576 | |
| Stats 488896.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276844 bytes_read=18354214 bytes_retransmit=9 bytes_invalid=0 send_seq=486288 receive_seq=486288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004256 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.47 cputime=4094.638 memavail=3619936 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.8 pwm=0.576 | |
| Stats 488897.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276850 bytes_read=18354437 bytes_retransmit=9 bytes_invalid=0 send_seq=486289 receive_seq=486289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.47 cputime=4094.669 memavail=3619932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.0 pwm=0.576 | |
| Stats 488898.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276856 bytes_read=18354658 bytes_retransmit=9 bytes_invalid=0 send_seq=486290 receive_seq=486290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004247 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.47 cputime=4094.690 memavail=3620020 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.0 pwm=0.576 | |
| Stats 488899.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276878 bytes_read=18354857 bytes_retransmit=9 bytes_invalid=0 send_seq=486292 receive_seq=486292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004313 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.59 cputime=4094.711 memavail=3619996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.2 pwm=0.577 | |
| Stats 488900.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276884 bytes_read=18355072 bytes_retransmit=9 bytes_invalid=0 send_seq=486293 receive_seq=486293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004411 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.59 cputime=4094.733 memavail=3619976 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.2 pwm=0.577 | |
| Stats 488901.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276890 bytes_read=18355294 bytes_retransmit=9 bytes_invalid=0 send_seq=486294 receive_seq=486294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004334 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.59 cputime=4094.754 memavail=3619944 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.4 pwm=0.577 | |
| Stats 488902.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276896 bytes_read=18355487 bytes_retransmit=9 bytes_invalid=0 send_seq=486295 receive_seq=486295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004390 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.59 cputime=4094.774 memavail=3619944 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.577 | |
| Stats 488903.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276902 bytes_read=18355710 bytes_retransmit=9 bytes_invalid=0 send_seq=486296 receive_seq=486296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004298 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.59 cputime=4094.795 memavail=3620160 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.1 pwm=0.577 | |
| Stats 488904.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276924 bytes_read=18355951 bytes_retransmit=9 bytes_invalid=0 send_seq=486298 receive_seq=486298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004387 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.54 cputime=4094.818 memavail=3619944 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.594 | |
| Stats 488905.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276930 bytes_read=18356144 bytes_retransmit=9 bytes_invalid=0 send_seq=486299 receive_seq=486299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004413 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.54 cputime=4094.839 memavail=3619944 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.594 | |
| Stats 488906.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276936 bytes_read=18356382 bytes_retransmit=9 bytes_invalid=0 send_seq=486300 receive_seq=486300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004319 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.54 cputime=4094.860 memavail=3619944 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.594 | |
| Stats 488907.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276942 bytes_read=18356589 bytes_retransmit=9 bytes_invalid=0 send_seq=486301 receive_seq=486301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004304 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.54 cputime=4094.880 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.2 pwm=0.594 | |
| Stats 488908.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276964 bytes_read=18356787 bytes_retransmit=9 bytes_invalid=0 send_seq=486303 receive_seq=486303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004397 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.54 cputime=4094.901 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.592 | |
| Stats 488909.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276970 bytes_read=18357039 bytes_retransmit=9 bytes_invalid=0 send_seq=486304 receive_seq=486304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.58 cputime=4094.923 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.592 | |
| Stats 488910.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276976 bytes_read=18357246 bytes_retransmit=9 bytes_invalid=0 send_seq=486305 receive_seq=486305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004237 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.58 cputime=4094.944 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.4 pwm=0.592 | |
| Stats 488911.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18276982 bytes_read=18357439 bytes_retransmit=9 bytes_invalid=0 send_seq=486306 receive_seq=486306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004280 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.58 cputime=4094.965 memavail=3620120 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.6 pwm=0.592 | |
| Stats 488912.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277004 bytes_read=18357682 bytes_retransmit=9 bytes_invalid=0 send_seq=486308 receive_seq=486308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004360 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.58 cputime=4094.987 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.5 pwm=0.599 | |
| Stats 488913.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277010 bytes_read=18357889 bytes_retransmit=9 bytes_invalid=0 send_seq=486309 receive_seq=486309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004352 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.58 cputime=4095.008 memavail=3620068 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.6 pwm=0.599 | |
| Stats 488914.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277016 bytes_read=18358096 bytes_retransmit=9 bytes_invalid=0 send_seq=486310 receive_seq=486310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004405 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.53 cputime=4095.029 memavail=3619964 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.4 pwm=0.599 | |
| Stats 488915.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277022 bytes_read=18358334 bytes_retransmit=9 bytes_invalid=0 send_seq=486311 receive_seq=486311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004389 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.53 cputime=4095.055 memavail=3619964 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.5 pwm=0.599 | |
| Stats 488916.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277044 bytes_read=18358546 bytes_retransmit=9 bytes_invalid=0 send_seq=486313 receive_seq=486313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004369 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.53 cputime=4095.076 memavail=3619964 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.7 pwm=0.589 | |
| Stats 488917.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277050 bytes_read=18358739 bytes_retransmit=9 bytes_invalid=0 send_seq=486314 receive_seq=486314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004450 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.53 cputime=4095.097 memavail=3619964 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.6 pwm=0.589 | |
| Stats 488918.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277056 bytes_read=18358977 bytes_retransmit=9 bytes_invalid=0 send_seq=486315 receive_seq=486315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004510 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.53 cputime=4095.120 memavail=3619936 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.7 pwm=0.589 | |
| Stats 488919.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277062 bytes_read=18359198 bytes_retransmit=9 bytes_invalid=0 send_seq=486316 receive_seq=486316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004590 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.140 memavail=3620016 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.8 pwm=0.589 | |
| Stats 488920.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277084 bytes_read=18359396 bytes_retransmit=9 bytes_invalid=0 send_seq=486318 receive_seq=486318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004633 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.161 memavail=3619796 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.8 pwm=0.587 | |
| Stats 488921.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277090 bytes_read=18359634 bytes_retransmit=9 bytes_invalid=0 send_seq=486319 receive_seq=486319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004637 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.186 memavail=3619748 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.8 pwm=0.587 | |
| Stats 488922.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277096 bytes_read=18359837 bytes_retransmit=9 bytes_invalid=0 send_seq=486320 receive_seq=486320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004685 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.207 memavail=3619724 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.9 pwm=0.587 | |
| Stats 488923.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277102 bytes_read=18360017 bytes_retransmit=9 bytes_invalid=0 send_seq=486321 receive_seq=486321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004746 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.229 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.1 pwm=0.587 | |
| Stats 488924.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277108 bytes_read=18360264 bytes_retransmit=9 bytes_invalid=0 send_seq=486322 receive_seq=486322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004790 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.251 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.587 | |
| Stats 488925.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277130 bytes_read=18360476 bytes_retransmit=9 bytes_invalid=0 send_seq=486324 receive_seq=486324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004810 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.272 memavail=3619740 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.1 pwm=0.567 | |
| Stats 488926.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277136 bytes_read=18360669 bytes_retransmit=9 bytes_invalid=0 send_seq=486325 receive_seq=486325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004719 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.292 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.567 | |
| Stats 488927.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277142 bytes_read=18360907 bytes_retransmit=9 bytes_invalid=0 send_seq=486326 receive_seq=486326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004628 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.315 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.567 | |
| Stats 488928.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277148 bytes_read=18361114 bytes_retransmit=9 bytes_invalid=0 send_seq=486327 receive_seq=486327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004575 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.45 cputime=4095.337 memavail=3619780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.567 | |
| Stats 488929.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277170 bytes_read=18361326 bytes_retransmit=9 bytes_invalid=0 send_seq=486329 receive_seq=486329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004490 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.49 cputime=4095.359 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.573 | |
| Stats 488930.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277176 bytes_read=18361564 bytes_retransmit=9 bytes_invalid=0 send_seq=486330 receive_seq=486330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004428 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.49 cputime=4095.380 memavail=3619748 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.573 | |
| Stats 488931.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277182 bytes_read=18361771 bytes_retransmit=9 bytes_invalid=0 send_seq=486331 receive_seq=486331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004405 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.400 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.573 | |
| Stats 488932.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277188 bytes_read=18361964 bytes_retransmit=9 bytes_invalid=0 send_seq=486332 receive_seq=486332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004362 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.420 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.573 | |
| Stats 488933.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277210 bytes_read=18362207 bytes_retransmit=9 bytes_invalid=0 send_seq=486334 receive_seq=486334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004306 heater_bed: target=0 temp=25.9 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.49 cputime=4095.449 memavail=3619768 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.593 | |
| Stats 488934.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277216 bytes_read=18362428 bytes_retransmit=9 bytes_invalid=0 send_seq=486335 receive_seq=486335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004409 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.45 cputime=4095.473 memavail=3619720 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.593 | |
| Stats 488935.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277222 bytes_read=18362621 bytes_retransmit=9 bytes_invalid=0 send_seq=486336 receive_seq=486336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004356 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.45 cputime=4095.493 memavail=3619832 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.593 | |
| Stats 488936.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277228 bytes_read=18362859 bytes_retransmit=9 bytes_invalid=0 send_seq=486337 receive_seq=486337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004380 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.514 memavail=3619772 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.593 | |
| Stats 488937.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277250 bytes_read=18363071 bytes_retransmit=9 bytes_invalid=0 send_seq=486339 receive_seq=486339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004386 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.45 cputime=4095.535 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.585 | |
| Stats 488938.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277256 bytes_read=18363264 bytes_retransmit=9 bytes_invalid=0 send_seq=486340 receive_seq=486340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004382 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.45 cputime=4095.554 memavail=3619780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.585 | |
| Stats 488939.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277268 bytes_read=18363532 bytes_retransmit=9 bytes_invalid=0 send_seq=486342 receive_seq=486342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004403 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4095.575 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.585 | |
| Stats 488940.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277274 bytes_read=18363739 bytes_retransmit=9 bytes_invalid=0 send_seq=486343 receive_seq=486343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004478 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4095.595 memavail=3619660 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.585 | |
| Stats 488941.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277296 bytes_read=18363937 bytes_retransmit=9 bytes_invalid=0 send_seq=486345 receive_seq=486345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004402 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4095.616 memavail=3619780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.576 | |
| Stats 488942.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277302 bytes_read=18364175 bytes_retransmit=9 bytes_invalid=0 send_seq=486346 receive_seq=486346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004485 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4095.637 memavail=3619780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.576 | |
| Stats 488943.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277308 bytes_read=18364382 bytes_retransmit=9 bytes_invalid=0 send_seq=486347 receive_seq=486347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004441 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.42 cputime=4095.657 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.576 | |
| Stats 488944.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277314 bytes_read=18364575 bytes_retransmit=9 bytes_invalid=0 send_seq=486348 receive_seq=486348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004388 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.676 memavail=3619816 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.576 | |
| Stats 488945.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277320 bytes_read=18364827 bytes_retransmit=9 bytes_invalid=0 send_seq=486349 receive_seq=486349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004306 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.697 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.576 | |
| Stats 488946.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277342 bytes_read=18365034 bytes_retransmit=9 bytes_invalid=0 send_seq=486351 receive_seq=486351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004271 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.720 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.577 | |
| Stats 488947.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277348 bytes_read=18365214 bytes_retransmit=9 bytes_invalid=0 send_seq=486352 receive_seq=486352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004366 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.740 memavail=3619808 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.577 | |
| Stats 488948.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277354 bytes_read=18365449 bytes_retransmit=9 bytes_invalid=0 send_seq=486353 receive_seq=486353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004409 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.38 cputime=4095.761 memavail=3619764 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.577 | |
| Stats 488949.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277360 bytes_read=18365656 bytes_retransmit=9 bytes_invalid=0 send_seq=486354 receive_seq=486354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004390 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4095.780 memavail=3619868 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.577 | |
| Stats 488950.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277382 bytes_read=18365868 bytes_retransmit=9 bytes_invalid=0 send_seq=486356 receive_seq=486356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004439 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.35 cputime=4095.800 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488951.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277388 bytes_read=18366106 bytes_retransmit=9 bytes_invalid=0 send_seq=486357 receive_seq=486357 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004335 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.35 cputime=4095.821 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488952.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277394 bytes_read=18366313 bytes_retransmit=9 bytes_invalid=0 send_seq=486358 receive_seq=486358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004256 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4095.838 memavail=3619868 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488953.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277400 bytes_read=18366506 bytes_retransmit=9 bytes_invalid=0 send_seq=486359 receive_seq=486359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004193 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4095.858 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488954.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277422 bytes_read=18366749 bytes_retransmit=9 bytes_invalid=0 send_seq=486361 receive_seq=486361 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.32 cputime=4095.879 memavail=3619764 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.583 | |
| Stats 488955.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277428 bytes_read=18366970 bytes_retransmit=9 bytes_invalid=0 send_seq=486362 receive_seq=486362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004165 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4095.899 memavail=3619796 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.583 | |
| Stats 488956.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277434 bytes_read=18367163 bytes_retransmit=9 bytes_invalid=0 send_seq=486363 receive_seq=486363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004186 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.32 cputime=4095.918 memavail=3619824 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.583 | |
| Stats 488957.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277440 bytes_read=18367401 bytes_retransmit=9 bytes_invalid=0 send_seq=486364 receive_seq=486364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004167 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4095.938 memavail=3619864 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.583 | |
| Stats 488958.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277462 bytes_read=18367613 bytes_retransmit=9 bytes_invalid=0 send_seq=486366 receive_seq=486366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004083 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4095.959 memavail=3620288 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.589 | |
| Stats 488959.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277468 bytes_read=18367806 bytes_retransmit=9 bytes_invalid=0 send_seq=486367 receive_seq=486367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004142 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.979 memavail=3620388 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.589 | |
| Stats 488960.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277474 bytes_read=18368058 bytes_retransmit=9 bytes_invalid=0 send_seq=486368 receive_seq=486368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004228 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4095.999 memavail=3620424 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.589 | |
| Stats 488961.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277480 bytes_read=18368265 bytes_retransmit=9 bytes_invalid=0 send_seq=486369 receive_seq=486369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004182 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4096.018 memavail=3620308 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.589 | |
| Stats 488962.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277502 bytes_read=18368463 bytes_retransmit=9 bytes_invalid=0 send_seq=486371 receive_seq=486371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004283 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4096.038 memavail=3620460 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488963.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277508 bytes_read=18368701 bytes_retransmit=9 bytes_invalid=0 send_seq=486372 receive_seq=486372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004375 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.38 cputime=4096.059 memavail=3620428 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.588 | |
| Stats 488964.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277514 bytes_read=18368908 bytes_retransmit=9 bytes_invalid=0 send_seq=486373 receive_seq=486373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004448 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4096.080 memavail=3620428 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488965.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277520 bytes_read=18369130 bytes_retransmit=9 bytes_invalid=0 send_seq=486374 receive_seq=486374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004525 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4096.100 memavail=3620332 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.588 | |
| Stats 488966.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277526 bytes_read=18369353 bytes_retransmit=9 bytes_invalid=0 send_seq=486375 receive_seq=486375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004555 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4096.121 memavail=3620540 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.588 | |
| Stats 488967.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277548 bytes_read=18369565 bytes_retransmit=9 bytes_invalid=0 send_seq=486377 receive_seq=486377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004589 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4096.140 memavail=3620436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.578 | |
| Stats 488968.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277554 bytes_read=18369773 bytes_retransmit=9 bytes_invalid=0 send_seq=486378 receive_seq=486378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004671 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.35 cputime=4096.162 memavail=3620436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.578 | |
| Stats 488969.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277560 bytes_read=18369996 bytes_retransmit=9 bytes_invalid=0 send_seq=486379 receive_seq=486379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004675 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4096.182 memavail=3620436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.578 | |
| Stats 488970.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277566 bytes_read=18370208 bytes_retransmit=9 bytes_invalid=0 send_seq=486380 receive_seq=486380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004698 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4096.203 memavail=3620436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.578 | |
| Stats 488971.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277588 bytes_read=18370408 bytes_retransmit=9 bytes_invalid=0 send_seq=486382 receive_seq=486382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004599 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.32 cputime=4096.224 memavail=3620436 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.580 | |
| Stats 488972.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277594 bytes_read=18370631 bytes_retransmit=9 bytes_invalid=0 send_seq=486383 receive_seq=486383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004535 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4096.244 memavail=3620492 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.580 | |
| Stats 488973.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277600 bytes_read=18370838 bytes_retransmit=9 bytes_invalid=0 send_seq=486384 receive_seq=486384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004591 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.32 cputime=4096.264 memavail=3620456 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.580 | |
| Stats 488974.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277606 bytes_read=18371046 bytes_retransmit=9 bytes_invalid=0 send_seq=486385 receive_seq=486385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004648 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4096.284 memavail=3620528 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.580 | |
| Stats 488975.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277628 bytes_read=18371288 bytes_retransmit=9 bytes_invalid=0 send_seq=486387 receive_seq=486387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004548 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.29 cputime=4096.307 memavail=3620456 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.573 | |
| Stats 488976.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277634 bytes_read=18371495 bytes_retransmit=9 bytes_invalid=0 send_seq=486388 receive_seq=486388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004484 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4096.328 memavail=3620456 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.573 | |
| Stats 488977.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277640 bytes_read=18371703 bytes_retransmit=9 bytes_invalid=0 send_seq=486389 receive_seq=486389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004380 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4096.350 memavail=3620456 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.573 | |
| Stats 488978.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277646 bytes_read=18371926 bytes_retransmit=9 bytes_invalid=0 send_seq=486390 receive_seq=486390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004355 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4096.371 memavail=3620460 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.573 | |
| Stats 488979.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277668 bytes_read=18372138 bytes_retransmit=9 bytes_invalid=0 send_seq=486392 receive_seq=486392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004352 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4096.391 memavail=3620372 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.602 | |
| Stats 488980.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277674 bytes_read=18372360 bytes_retransmit=9 bytes_invalid=0 send_seq=486393 receive_seq=486393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004250 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4096.416 memavail=3620472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.602 | |
| Stats 488981.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277680 bytes_read=18372583 bytes_retransmit=9 bytes_invalid=0 send_seq=486394 receive_seq=486394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004214 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4096.443 memavail=3620472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.602 | |
| Stats 488982.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277686 bytes_read=18372790 bytes_retransmit=9 bytes_invalid=0 send_seq=486395 receive_seq=486395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004121 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4096.463 memavail=3620488 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.602 | |
| Stats 488983.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277708 bytes_read=18373003 bytes_retransmit=9 bytes_invalid=0 send_seq=486397 receive_seq=486397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004036 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4096.484 memavail=3620504 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.596 | |
| Stats 488984.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277714 bytes_read=18373226 bytes_retransmit=9 bytes_invalid=0 send_seq=486398 receive_seq=486398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003985 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.25 cputime=4096.505 memavail=3620472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.596 | |
| Stats 488985.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277720 bytes_read=18373447 bytes_retransmit=9 bytes_invalid=0 send_seq=486399 receive_seq=486399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003972 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4096.525 memavail=3620364 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.596 | |
| Stats 488986.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277726 bytes_read=18373655 bytes_retransmit=9 bytes_invalid=0 send_seq=486400 receive_seq=486400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004051 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4096.546 memavail=3620484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.596 | |
| Stats 488987.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277732 bytes_read=18373878 bytes_retransmit=9 bytes_invalid=0 send_seq=486401 receive_seq=486401 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004146 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4096.568 memavail=3620484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.596 | |
| Stats 488988.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277754 bytes_read=18374090 bytes_retransmit=9 bytes_invalid=0 send_seq=486403 receive_seq=486403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004161 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4096.589 memavail=3620372 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.585 | |
| Stats 488989.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277760 bytes_read=18374298 bytes_retransmit=9 bytes_invalid=0 send_seq=486404 receive_seq=486404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004264 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4096.610 memavail=3620484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.585 | |
| Stats 488990.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277766 bytes_read=18374535 bytes_retransmit=9 bytes_invalid=0 send_seq=486405 receive_seq=486405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004266 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4096.632 memavail=3620484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.585 | |
| Stats 488991.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277772 bytes_read=18374742 bytes_retransmit=9 bytes_invalid=0 send_seq=486406 receive_seq=486406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004362 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4096.652 memavail=3620608 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.585 | |
| Stats 488992.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277794 bytes_read=18374955 bytes_retransmit=9 bytes_invalid=0 send_seq=486408 receive_seq=486408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004285 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4096.673 memavail=3620576 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.580 | |
| Stats 488993.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277800 bytes_read=18375178 bytes_retransmit=9 bytes_invalid=0 send_seq=486409 receive_seq=486409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004232 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4096.697 memavail=3620496 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.580 | |
| Stats 488994.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277806 bytes_read=18375377 bytes_retransmit=9 bytes_invalid=0 send_seq=486410 receive_seq=486410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4096.718 memavail=3620496 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.580 | |
| Stats 488995.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277812 bytes_read=18375587 bytes_retransmit=9 bytes_invalid=0 send_seq=486411 receive_seq=486411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4096.738 memavail=3620376 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.580 | |
| Stats 488996.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277834 bytes_read=18375814 bytes_retransmit=9 bytes_invalid=0 send_seq=486413 receive_seq=486413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004269 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4096.758 memavail=3620624 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.586 | |
| Stats 488997.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277840 bytes_read=18376021 bytes_retransmit=9 bytes_invalid=0 send_seq=486414 receive_seq=486414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004223 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.28 cputime=4096.778 memavail=3620504 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 488998.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277846 bytes_read=18376229 bytes_retransmit=9 bytes_invalid=0 send_seq=486415 receive_seq=486415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004230 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4096.799 memavail=3620504 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 488999.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277852 bytes_read=18376452 bytes_retransmit=9 bytes_invalid=0 send_seq=486416 receive_seq=486416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004204 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.26 cputime=4096.824 memavail=3620504 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.586 | |
| Stats 489000.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277880 bytes_read=18376678 bytes_retransmit=9 bytes_invalid=0 send_seq=486419 receive_seq=486418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004218 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.26 cputime=4096.846 memavail=3620516 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489001.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277886 bytes_read=18376902 bytes_retransmit=9 bytes_invalid=0 send_seq=486420 receive_seq=486420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004309 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.26 cputime=4096.867 memavail=3620520 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.581 | |
| Stats 489002.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277892 bytes_read=18377125 bytes_retransmit=9 bytes_invalid=0 send_seq=486421 receive_seq=486421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.26 cputime=4096.888 memavail=3620472 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489003.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277898 bytes_read=18377332 bytes_retransmit=9 bytes_invalid=0 send_seq=486422 receive_seq=486422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004258 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.26 cputime=4096.908 memavail=3620512 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489004.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277920 bytes_read=18377545 bytes_retransmit=9 bytes_invalid=0 send_seq=486424 receive_seq=486424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004265 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=4096.928 memavail=3620520 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.566 | |
| Stats 489005.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277926 bytes_read=18377796 bytes_retransmit=9 bytes_invalid=0 send_seq=486425 receive_seq=486425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004250 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=4096.948 memavail=3620568 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.566 | |
| Stats 489006.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277932 bytes_read=18377989 bytes_retransmit=9 bytes_invalid=0 send_seq=486426 receive_seq=486426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004340 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=4096.967 memavail=3620524 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.566 | |
| Stats 489007.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277938 bytes_read=18378197 bytes_retransmit=9 bytes_invalid=0 send_seq=486427 receive_seq=486427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004359 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=4096.988 memavail=3620484 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.566 | |
| Stats 489008.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277944 bytes_read=18378434 bytes_retransmit=9 bytes_invalid=0 send_seq=486428 receive_seq=486428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004360 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=4097.009 memavail=3620524 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.578 | |
| Stats 489009.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277966 bytes_read=18378632 bytes_retransmit=9 bytes_invalid=0 send_seq=486430 receive_seq=486430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004285 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=4097.028 memavail=3620528 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.578 | |
| Stats 489010.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277972 bytes_read=18378854 bytes_retransmit=9 bytes_invalid=0 send_seq=486431 receive_seq=486431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004321 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=4097.048 memavail=3620532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.578 | |
| Stats 489011.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277978 bytes_read=18379091 bytes_retransmit=9 bytes_invalid=0 send_seq=486432 receive_seq=486432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004347 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.22 cputime=4097.069 memavail=3620532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.578 | |
| Stats 489012.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18277984 bytes_read=18379284 bytes_retransmit=9 bytes_invalid=0 send_seq=486433 receive_seq=486433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004246 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=4097.088 memavail=3620532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.578 | |
| Stats 489013.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278006 bytes_read=18379497 bytes_retransmit=9 bytes_invalid=0 send_seq=486435 receive_seq=486435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004156 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=4097.110 memavail=3620532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.576 | |
| Stats 489014.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278012 bytes_read=18379734 bytes_retransmit=9 bytes_invalid=0 send_seq=486436 receive_seq=486436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004106 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.20 cputime=4097.131 memavail=3620532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.576 | |
| Stats 489015.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278018 bytes_read=18379941 bytes_retransmit=9 bytes_invalid=0 send_seq=486437 receive_seq=486437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004116 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.20 cputime=4097.150 memavail=3620512 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.576 | |
| Stats 489016.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278024 bytes_read=18380164 bytes_retransmit=9 bytes_invalid=0 send_seq=486438 receive_seq=486438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004116 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.20 cputime=4097.170 memavail=3620704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.576 | |
| Stats 489017.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278046 bytes_read=18380391 bytes_retransmit=9 bytes_invalid=0 send_seq=486440 receive_seq=486440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.20 cputime=4097.192 memavail=3620548 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.576 | |
| Stats 489018.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278052 bytes_read=18380571 bytes_retransmit=9 bytes_invalid=0 send_seq=486441 receive_seq=486441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004238 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.20 cputime=4097.211 memavail=3620548 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.576 | |
| Stats 489019.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278058 bytes_read=18380785 bytes_retransmit=9 bytes_invalid=0 send_seq=486442 receive_seq=486442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004297 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.43 cputime=4097.232 memavail=3620780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.576 | |
| Stats 489020.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278064 bytes_read=18381021 bytes_retransmit=9 bytes_invalid=0 send_seq=486443 receive_seq=486443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004313 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.43 cputime=4097.253 memavail=3620716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.576 | |
| Stats 489021.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278086 bytes_read=18381219 bytes_retransmit=9 bytes_invalid=0 send_seq=486445 receive_seq=486445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004340 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.43 cputime=4097.273 memavail=3620788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.565 | |
| Stats 489022.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278092 bytes_read=18381442 bytes_retransmit=9 bytes_invalid=0 send_seq=486446 receive_seq=486446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004395 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.43 cputime=4097.294 memavail=3620852 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.565 | |
| Stats 489023.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278098 bytes_read=18381664 bytes_retransmit=9 bytes_invalid=0 send_seq=486447 receive_seq=486447 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004339 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.43 cputime=4097.315 memavail=3620720 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.565 | |
| Stats 489024.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278104 bytes_read=18381857 bytes_retransmit=9 bytes_invalid=0 send_seq=486448 receive_seq=486448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004276 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4097.336 memavail=3620720 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.565 | |
| Stats 489025.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278126 bytes_read=18382099 bytes_retransmit=9 bytes_invalid=0 send_seq=486450 receive_seq=486450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004249 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4097.357 memavail=3620640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.574 | |
| Stats 489026.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278132 bytes_read=18382321 bytes_retransmit=9 bytes_invalid=0 send_seq=486451 receive_seq=486451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004155 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4097.378 memavail=3620736 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.574 | |
| Stats 489027.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278138 bytes_read=18382514 bytes_retransmit=9 bytes_invalid=0 send_seq=486452 receive_seq=486452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004186 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4097.405 memavail=3620740 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.574 | |
| Stats 489028.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278144 bytes_read=18382752 bytes_retransmit=9 bytes_invalid=0 send_seq=486453 receive_seq=486453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4097.428 memavail=3620772 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.574 | |
| Stats 489029.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278150 bytes_read=18382959 bytes_retransmit=9 bytes_invalid=0 send_seq=486454 receive_seq=486454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004084 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4097.449 memavail=3620740 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489030.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278172 bytes_read=18383171 bytes_retransmit=9 bytes_invalid=0 send_seq=486456 receive_seq=486456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004021 heater_bed: target=0 temp=26.0 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4097.471 memavail=3620744 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.581 | |
| Stats 489031.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278178 bytes_read=18383409 bytes_retransmit=9 bytes_invalid=0 send_seq=486457 receive_seq=486457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004094 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4097.493 memavail=3620744 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489032.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278184 bytes_read=18383616 bytes_retransmit=9 bytes_invalid=0 send_seq=486458 receive_seq=486458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004041 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4097.513 memavail=3620744 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.581 | |
| Stats 489033.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278190 bytes_read=18383809 bytes_retransmit=9 bytes_invalid=0 send_seq=486459 receive_seq=486459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004118 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4097.534 memavail=3620752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489034.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278212 bytes_read=18384052 bytes_retransmit=9 bytes_invalid=0 send_seq=486461 receive_seq=486461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004215 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4097.559 memavail=3620752 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.577 | |
| Stats 489035.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278218 bytes_read=18384273 bytes_retransmit=9 bytes_invalid=0 send_seq=486462 receive_seq=486462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4097.580 memavail=3620976 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.577 | |
| Stats 489036.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278224 bytes_read=18384466 bytes_retransmit=9 bytes_invalid=0 send_seq=486463 receive_seq=486463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004232 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4097.601 memavail=3620872 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.577 | |
| Stats 489037.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278230 bytes_read=18384704 bytes_retransmit=9 bytes_invalid=0 send_seq=486464 receive_seq=486464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4097.622 memavail=3620808 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.577 | |
| Stats 489038.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278247 bytes_read=18384911 bytes_retransmit=9 bytes_invalid=0 send_seq=486465 receive_seq=486465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004193 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4097.642 memavail=3620992 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.578 | |
| Stats 489039.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278253 bytes_read=18385104 bytes_retransmit=9 bytes_invalid=0 send_seq=486466 receive_seq=486466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004226 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4097.662 memavail=3620932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.578 | |
| Stats 489040.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278259 bytes_read=18385356 bytes_retransmit=9 bytes_invalid=0 send_seq=486467 receive_seq=486467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004255 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4097.689 memavail=3620972 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.578 | |
| Stats 489041.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278265 bytes_read=18385563 bytes_retransmit=9 bytes_invalid=0 send_seq=486468 receive_seq=486468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004316 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4097.709 memavail=3620932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.578 | |
| Stats 489042.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278287 bytes_read=18385748 bytes_retransmit=9 bytes_invalid=0 send_seq=486470 receive_seq=486470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4097.729 memavail=3620932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.574 | |
| Stats 489043.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278293 bytes_read=18385977 bytes_retransmit=9 bytes_invalid=0 send_seq=486471 receive_seq=486471 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004371 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4097.750 memavail=3620932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.574 | |
| Stats 489044.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278299 bytes_read=18386184 bytes_retransmit=9 bytes_invalid=0 send_seq=486472 receive_seq=486472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004278 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4097.771 memavail=3620932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.574 | |
| Stats 489045.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278305 bytes_read=18386391 bytes_retransmit=9 bytes_invalid=0 send_seq=486473 receive_seq=486473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004341 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4097.791 memavail=3620940 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.574 | |
| Stats 489046.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278327 bytes_read=18386634 bytes_retransmit=9 bytes_invalid=0 send_seq=486475 receive_seq=486475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004378 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4097.813 memavail=3621012 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.571 | |
| Stats 489047.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278333 bytes_read=18386841 bytes_retransmit=9 bytes_invalid=0 send_seq=486476 receive_seq=486476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004414 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4097.834 memavail=3620940 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.571 | |
| Stats 489048.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278339 bytes_read=18387034 bytes_retransmit=9 bytes_invalid=0 send_seq=486477 receive_seq=486477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004405 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4097.854 memavail=3620876 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.571 | |
| Stats 489049.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278345 bytes_read=18387272 bytes_retransmit=9 bytes_invalid=0 send_seq=486478 receive_seq=486478 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004348 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4097.876 memavail=3621060 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.571 | |
| Stats 489050.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278351 bytes_read=18387493 bytes_retransmit=9 bytes_invalid=0 send_seq=486479 receive_seq=486479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004326 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4097.895 memavail=3621120 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.582 | |
| Stats 489051.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278373 bytes_read=18387691 bytes_retransmit=9 bytes_invalid=0 send_seq=486481 receive_seq=486481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004377 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4097.915 memavail=3621076 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.582 | |
| Stats 489052.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278379 bytes_read=18387929 bytes_retransmit=9 bytes_invalid=0 send_seq=486482 receive_seq=486482 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004363 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4097.938 memavail=3621108 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489053.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278385 bytes_read=18388136 bytes_retransmit=9 bytes_invalid=0 send_seq=486483 receive_seq=486483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004449 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4097.959 memavail=3621084 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489054.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278391 bytes_read=18388329 bytes_retransmit=9 bytes_invalid=0 send_seq=486484 receive_seq=486484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004527 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.37 cputime=4097.979 memavail=3621092 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489055.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278413 bytes_read=18388586 bytes_retransmit=9 bytes_invalid=0 send_seq=486486 receive_seq=486486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004588 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4098.002 memavail=3621092 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.574 | |
| Stats 489056.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278419 bytes_read=18388793 bytes_retransmit=9 bytes_invalid=0 send_seq=486487 receive_seq=486487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004543 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4098.023 memavail=3621096 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.574 | |
| Stats 489057.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278425 bytes_read=18388986 bytes_retransmit=9 bytes_invalid=0 send_seq=486488 receive_seq=486488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004599 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.6 pwm=0.000 sysload=1.37 cputime=4098.042 memavail=3621080 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.574 | |
| Stats 489058.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278431 bytes_read=18389224 bytes_retransmit=9 bytes_invalid=0 send_seq=486489 receive_seq=486489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004637 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4098.063 memavail=3621104 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.574 | |
| Stats 489059.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278453 bytes_read=18389436 bytes_retransmit=9 bytes_invalid=0 send_seq=486491 receive_seq=486491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004642 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.34 cputime=4098.085 memavail=3621088 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.568 | |
| Stats 489060.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278459 bytes_read=18389643 bytes_retransmit=9 bytes_invalid=0 send_seq=486492 receive_seq=486492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004616 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.34 cputime=4098.107 memavail=3621072 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.568 | |
| Stats 489061.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278465 bytes_read=18389881 bytes_retransmit=9 bytes_invalid=0 send_seq=486493 receive_seq=486493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004530 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.34 cputime=4098.129 memavail=3621148 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.568 | |
| Stats 489062.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278477 bytes_read=18390104 bytes_retransmit=9 bytes_invalid=0 send_seq=486495 receive_seq=486495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004508 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.34 cputime=4098.151 memavail=3621140 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.568 | |
| Stats 489063.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278499 bytes_read=18390302 bytes_retransmit=9 bytes_invalid=0 send_seq=486497 receive_seq=486497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004445 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.34 cputime=4098.171 memavail=3621112 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.580 | |
| Stats 489064.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278505 bytes_read=18390540 bytes_retransmit=9 bytes_invalid=0 send_seq=486498 receive_seq=486498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004349 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4098.198 memavail=3621080 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.580 | |
| Stats 489065.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278511 bytes_read=18390758 bytes_retransmit=9 bytes_invalid=0 send_seq=486499 receive_seq=486499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004329 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4098.224 memavail=3621096 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.580 | |
| Stats 489066.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278517 bytes_read=18390938 bytes_retransmit=9 bytes_invalid=0 send_seq=486500 receive_seq=486500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004328 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4098.244 memavail=3620980 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.580 | |
| Stats 489067.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278539 bytes_read=18391176 bytes_retransmit=9 bytes_invalid=0 send_seq=486502 receive_seq=486502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004345 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4098.267 memavail=3620980 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.581 | |
| Stats 489068.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278545 bytes_read=18391383 bytes_retransmit=9 bytes_invalid=0 send_seq=486503 receive_seq=486503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004318 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.31 cputime=4098.288 memavail=3620980 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.581 | |
| Stats 489069.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278551 bytes_read=18391576 bytes_retransmit=9 bytes_invalid=0 send_seq=486504 receive_seq=486504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004217 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4098.307 memavail=3620980 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.581 | |
| Stats 489070.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278557 bytes_read=18391828 bytes_retransmit=9 bytes_invalid=0 send_seq=486505 receive_seq=486505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004238 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4098.328 memavail=3620956 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.581 | |
| Stats 489071.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278579 bytes_read=18392040 bytes_retransmit=9 bytes_invalid=0 send_seq=486507 receive_seq=486507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4098.349 memavail=3620996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.581 | |
| Stats 489072.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278585 bytes_read=18392233 bytes_retransmit=9 bytes_invalid=0 send_seq=486508 receive_seq=486508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004276 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4098.369 memavail=3620860 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.581 | |
| Stats 489073.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278591 bytes_read=18392471 bytes_retransmit=9 bytes_invalid=0 send_seq=486509 receive_seq=486509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.29 cputime=4098.390 memavail=3620996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.581 | |
| Stats 489074.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278597 bytes_read=18392678 bytes_retransmit=9 bytes_invalid=0 send_seq=486510 receive_seq=486510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004267 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.411 memavail=3620860 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.581 | |
| Stats 489075.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278603 bytes_read=18392885 bytes_retransmit=9 bytes_invalid=0 send_seq=486511 receive_seq=486511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004278 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.431 memavail=3620996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.581 | |
| Stats 489076.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278625 bytes_read=18393128 bytes_retransmit=9 bytes_invalid=0 send_seq=486513 receive_seq=486513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004251 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.452 memavail=3620964 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.587 | |
| Stats 489077.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278631 bytes_read=18393335 bytes_retransmit=9 bytes_invalid=0 send_seq=486514 receive_seq=486514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004214 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.472 memavail=3620996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.587 | |
| Stats 489078.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278637 bytes_read=18393528 bytes_retransmit=9 bytes_invalid=0 send_seq=486515 receive_seq=486515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004210 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.493 memavail=3616532 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.587 | |
| Stats 489079.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278643 bytes_read=18393766 bytes_retransmit=9 bytes_invalid=0 send_seq=486516 receive_seq=486516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004182 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4098.516 memavail=3619632 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.587 | |
| Stats 489080.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278665 bytes_read=18393992 bytes_retransmit=9 bytes_invalid=0 send_seq=486518 receive_seq=486518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4098.536 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.577 | |
| Stats 489081.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278671 bytes_read=18394185 bytes_retransmit=9 bytes_invalid=0 send_seq=486519 receive_seq=486519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004103 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4098.556 memavail=3619476 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.577 | |
| Stats 489082.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278677 bytes_read=18394423 bytes_retransmit=9 bytes_invalid=0 send_seq=486520 receive_seq=486520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004061 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4098.577 memavail=3619500 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.577 | |
| Stats 489083.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278683 bytes_read=18394630 bytes_retransmit=9 bytes_invalid=0 send_seq=486521 receive_seq=486521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4098.602 memavail=3619852 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.577 | |
| Stats 489084.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278705 bytes_read=18394828 bytes_retransmit=9 bytes_invalid=0 send_seq=486523 receive_seq=486523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004122 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4098.622 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.556 | |
| Stats 489085.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278711 bytes_read=18395080 bytes_retransmit=9 bytes_invalid=0 send_seq=486524 receive_seq=486524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004039 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4098.645 memavail=3619720 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.556 | |
| Stats 489086.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278717 bytes_read=18395287 bytes_retransmit=9 bytes_invalid=0 send_seq=486525 receive_seq=486525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003989 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4098.665 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.556 | |
| Stats 489087.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278723 bytes_read=18395480 bytes_retransmit=9 bytes_invalid=0 send_seq=486526 receive_seq=486526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004051 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4098.685 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.556 | |
| Stats 489088.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278745 bytes_read=18395723 bytes_retransmit=9 bytes_invalid=0 send_seq=486528 receive_seq=486528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004087 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4098.708 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489089.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278751 bytes_read=18395926 bytes_retransmit=9 bytes_invalid=0 send_seq=486529 receive_seq=486529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004021 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.728 memavail=3619656 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489090.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278757 bytes_read=18396134 bytes_retransmit=9 bytes_invalid=0 send_seq=486530 receive_seq=486530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004003 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.748 memavail=3619584 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.582 | |
| Stats 489091.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278763 bytes_read=18396354 bytes_retransmit=9 bytes_invalid=0 send_seq=486531 receive_seq=486531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004095 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.770 memavail=3619776 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.582 | |
| Stats 489092.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278785 bytes_read=18396566 bytes_retransmit=9 bytes_invalid=0 send_seq=486533 receive_seq=486533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.791 memavail=3619748 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.608 | |
| Stats 489093.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278791 bytes_read=18396774 bytes_retransmit=9 bytes_invalid=0 send_seq=486534 receive_seq=486534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004034 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=4098.811 memavail=3619660 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.608 | |
| Stats 489094.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278797 bytes_read=18396997 bytes_retransmit=9 bytes_invalid=0 send_seq=486535 receive_seq=486535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004150 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4098.833 memavail=3619772 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.608 | |
| Stats 489095.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278803 bytes_read=18397218 bytes_retransmit=9 bytes_invalid=0 send_seq=486536 receive_seq=486536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004220 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4098.856 memavail=3619628 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.608 | |
| Stats 489096.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278809 bytes_read=18397426 bytes_retransmit=9 bytes_invalid=0 send_seq=486537 receive_seq=486537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004163 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4098.877 memavail=3619692 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.608 | |
| Stats 489097.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278831 bytes_read=18397654 bytes_retransmit=9 bytes_invalid=0 send_seq=486539 receive_seq=486539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004182 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4098.898 memavail=3619836 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.590 | |
| Stats 489098.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278837 bytes_read=18397861 bytes_retransmit=9 bytes_invalid=0 send_seq=486540 receive_seq=486540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004128 heater_bed: target=0 temp=26.1 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.25 cputime=4098.918 memavail=3619716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.590 | |
| Stats 489099.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278843 bytes_read=18398069 bytes_retransmit=9 bytes_invalid=0 send_seq=486541 receive_seq=486541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.23 cputime=4098.939 memavail=3619820 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.590 | |
| Stats 489100.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278849 bytes_read=18398306 bytes_retransmit=9 bytes_invalid=0 send_seq=486542 receive_seq=486542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004235 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.23 cputime=4098.960 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.590 | |
| Stats 489101.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278866 bytes_read=18398513 bytes_retransmit=9 bytes_invalid=0 send_seq=486543 receive_seq=486543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.23 cputime=4098.986 memavail=3619664 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.580 | |
| Stats 489102.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278872 bytes_read=18398721 bytes_retransmit=9 bytes_invalid=0 send_seq=486544 receive_seq=486544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004271 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.23 cputime=4099.006 memavail=3619824 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.580 | |
| Stats 489103.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278878 bytes_read=18398944 bytes_retransmit=9 bytes_invalid=0 send_seq=486545 receive_seq=486545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004293 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.23 cputime=4099.028 memavail=3619640 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.580 | |
| Stats 489104.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278884 bytes_read=18399151 bytes_retransmit=9 bytes_invalid=0 send_seq=486546 receive_seq=486546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004270 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.21 cputime=4099.050 memavail=3619712 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.580 | |
| Stats 489105.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278906 bytes_read=18399378 bytes_retransmit=9 bytes_invalid=0 send_seq=486548 receive_seq=486548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004183 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.21 cputime=4099.071 memavail=3619728 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.573 | |
| Stats 489106.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278912 bytes_read=18399601 bytes_retransmit=9 bytes_invalid=0 send_seq=486549 receive_seq=486549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.21 cputime=4099.092 memavail=3619632 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.573 | |
| Stats 489107.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278918 bytes_read=18399808 bytes_retransmit=9 bytes_invalid=0 send_seq=486550 receive_seq=486550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004229 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.21 cputime=4099.115 memavail=3619656 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.573 | |
| Stats 489108.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278924 bytes_read=18400016 bytes_retransmit=9 bytes_invalid=0 send_seq=486551 receive_seq=486551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.21 cputime=4099.136 memavail=3619632 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.573 | |
| Stats 489109.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278946 bytes_read=18400244 bytes_retransmit=9 bytes_invalid=0 send_seq=486553 receive_seq=486553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004076 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4099.158 memavail=3619616 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.575 | |
| Stats 489110.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278952 bytes_read=18400465 bytes_retransmit=9 bytes_invalid=0 send_seq=486554 receive_seq=486554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004145 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4099.179 memavail=3619708 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.575 | |
| Stats 489111.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278958 bytes_read=18400673 bytes_retransmit=9 bytes_invalid=0 send_seq=486555 receive_seq=486555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004255 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4099.200 memavail=3619732 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.575 | |
| Stats 489112.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278964 bytes_read=18400896 bytes_retransmit=9 bytes_invalid=0 send_seq=486556 receive_seq=486556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004229 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4099.220 memavail=3619776 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.575 | |
| Stats 489113.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278986 bytes_read=18401102 bytes_retransmit=9 bytes_invalid=0 send_seq=486558 receive_seq=486558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004230 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4099.251 memavail=3619728 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489114.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278992 bytes_read=18401296 bytes_retransmit=9 bytes_invalid=0 send_seq=486559 receive_seq=486559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4099.273 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.581 | |
| Stats 489115.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18278998 bytes_read=18401532 bytes_retransmit=9 bytes_invalid=0 send_seq=486560 receive_seq=486560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004315 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4099.295 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.581 | |
| Stats 489116.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279004 bytes_read=18401739 bytes_retransmit=9 bytes_invalid=0 send_seq=486561 receive_seq=486561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004236 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4099.318 memavail=3619728 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.581 | |
| Stats 489117.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279010 bytes_read=18401947 bytes_retransmit=9 bytes_invalid=0 send_seq=486562 receive_seq=486562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004244 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4099.339 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.581 | |
| Stats 489118.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279032 bytes_read=18402175 bytes_retransmit=9 bytes_invalid=0 send_seq=486564 receive_seq=486564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004198 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.6 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.41 cputime=4099.364 memavail=3619660 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.586 | |
| Stats 489119.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279038 bytes_read=18402382 bytes_retransmit=9 bytes_invalid=0 send_seq=486565 receive_seq=486565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004133 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4099.384 memavail=3619764 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 489120.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279044 bytes_read=18402604 bytes_retransmit=9 bytes_invalid=0 send_seq=486566 receive_seq=486566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004099 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4099.405 memavail=3619784 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.586 | |
| Stats 489121.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279050 bytes_read=18402827 bytes_retransmit=9 bytes_invalid=0 send_seq=486567 receive_seq=486567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004179 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4099.428 memavail=3619600 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 489122.9: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279072 bytes_read=18403039 bytes_retransmit=9 bytes_invalid=0 send_seq=486569 receive_seq=486569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004097 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4099.450 memavail=3619760 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.585 | |
| Stats 489124.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279084 bytes_read=18403263 bytes_retransmit=9 bytes_invalid=0 send_seq=486571 receive_seq=486571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4099.472 memavail=3619992 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.585 | |
| Stats 489125.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279090 bytes_read=18403486 bytes_retransmit=9 bytes_invalid=0 send_seq=486572 receive_seq=486572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004190 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4099.495 memavail=3619864 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.585 | |
| Stats 489126.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279096 bytes_read=18403707 bytes_retransmit=9 bytes_invalid=0 send_seq=486573 receive_seq=486573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004147 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4099.517 memavail=3620016 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.585 | |
| Stats 489127.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279118 bytes_read=18403920 bytes_retransmit=9 bytes_invalid=0 send_seq=486575 receive_seq=486575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004139 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4099.540 memavail=3619960 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 489128.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279124 bytes_read=18404143 bytes_retransmit=9 bytes_invalid=0 send_seq=486576 receive_seq=486576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004208 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4099.563 memavail=3619872 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.586 | |
| Stats 489129.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279130 bytes_read=18404350 bytes_retransmit=9 bytes_invalid=0 send_seq=486577 receive_seq=486577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004218 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.35 cputime=4099.584 memavail=3619968 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 489130.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279136 bytes_read=18404558 bytes_retransmit=9 bytes_invalid=0 send_seq=486578 receive_seq=486578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004168 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4099.604 memavail=3619816 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.586 | |
| Stats 489131.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279158 bytes_read=18404814 bytes_retransmit=9 bytes_invalid=0 send_seq=486580 receive_seq=486580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004230 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4099.631 memavail=3619892 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.566 | |
| Stats 489132.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279164 bytes_read=18405007 bytes_retransmit=9 bytes_invalid=0 send_seq=486581 receive_seq=486581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004315 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4099.652 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.566 | |
| Stats 489133.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279170 bytes_read=18405215 bytes_retransmit=9 bytes_invalid=0 send_seq=486582 receive_seq=486582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004247 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4099.673 memavail=3619932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.566 | |
| Stats 489134.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279176 bytes_read=18405452 bytes_retransmit=9 bytes_invalid=0 send_seq=486583 receive_seq=486583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004162 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4099.696 memavail=3619908 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.566 | |
| Stats 489135.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279198 bytes_read=18405650 bytes_retransmit=9 bytes_invalid=0 send_seq=486585 receive_seq=486585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4099.717 memavail=3619924 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.551 | |
| Stats 489136.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279204 bytes_read=18405872 bytes_retransmit=9 bytes_invalid=0 send_seq=486586 receive_seq=486586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4099.738 memavail=3620028 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.551 | |
| Stats 489137.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279210 bytes_read=18406109 bytes_retransmit=9 bytes_invalid=0 send_seq=486587 receive_seq=486587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004156 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4099.769 memavail=3619996 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.551 | |
| Stats 489138.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279216 bytes_read=18406293 bytes_retransmit=9 bytes_invalid=0 send_seq=486588 receive_seq=486588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004079 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4099.790 memavail=3619812 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.551 | |
| Stats 489139.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279222 bytes_read=18406488 bytes_retransmit=9 bytes_invalid=0 send_seq=486589 receive_seq=486589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004170 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=4099.813 memavail=3619780 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.551 | |
| Stats 489140.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279244 bytes_read=18406730 bytes_retransmit=9 bytes_invalid=0 send_seq=486591 receive_seq=486591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004254 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4099.837 memavail=3619916 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.589 | |
| Stats 489141.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279266 bytes_read=18406942 bytes_retransmit=9 bytes_invalid=0 send_seq=486593 receive_seq=486593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4099.857 memavail=3619960 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.639 | |
| Stats 489142.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279272 bytes_read=18407150 bytes_retransmit=9 bytes_invalid=0 send_seq=486594 receive_seq=486594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004220 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4099.875 memavail=3620048 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.1 pwm=0.639 | |
| Stats 489143.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279294 bytes_read=18407392 bytes_retransmit=9 bytes_invalid=0 send_seq=486596 receive_seq=486596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004192 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4099.897 memavail=3619928 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.5 pwm=0.702 | |
| Stats 489144.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279300 bytes_read=18407585 bytes_retransmit=9 bytes_invalid=0 send_seq=486597 receive_seq=486597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004111 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4099.918 memavail=3620004 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.0 pwm=0.702 | |
| Stats 489145.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279322 bytes_read=18407813 bytes_retransmit=9 bytes_invalid=0 send_seq=486599 receive_seq=486599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4099.939 memavail=3619932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.5 pwm=0.754 | |
| Stats 489146.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279328 bytes_read=18408049 bytes_retransmit=9 bytes_invalid=0 send_seq=486600 receive_seq=486600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004186 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4099.961 memavail=3619916 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.9 pwm=0.754 | |
| Stats 489147.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279334 bytes_read=18408242 bytes_retransmit=9 bytes_invalid=0 send_seq=486601 receive_seq=486601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004268 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4099.980 memavail=3619828 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.4 pwm=0.754 | |
| Stats 489148.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279340 bytes_read=18408465 bytes_retransmit=9 bytes_invalid=0 send_seq=486602 receive_seq=486602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004352 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.39 cputime=4100.001 memavail=3620004 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.1 pwm=0.754 | |
| Stats 489149.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279346 bytes_read=18408687 bytes_retransmit=9 bytes_invalid=0 send_seq=486603 receive_seq=486603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004358 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.39 cputime=4100.022 memavail=3619960 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.8 pwm=0.763 | |
| Stats 489150.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279368 bytes_read=18408885 bytes_retransmit=9 bytes_invalid=0 send_seq=486605 receive_seq=486605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004389 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.36 cputime=4100.043 memavail=3620024 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.7 pwm=0.763 | |
| Stats 489151.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279374 bytes_read=18409122 bytes_retransmit=9 bytes_invalid=0 send_seq=486606 receive_seq=486606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004333 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.36 cputime=4100.065 memavail=3619952 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.7 pwm=0.763 | |
| Stats 489152.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279396 bytes_read=18409349 bytes_retransmit=9 bytes_invalid=0 send_seq=486608 receive_seq=486608 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004245 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4100.087 memavail=3620056 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.6 pwm=0.710 | |
| Stats 489153.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279402 bytes_read=18409542 bytes_retransmit=9 bytes_invalid=0 send_seq=486609 receive_seq=486609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004309 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4100.107 memavail=3619984 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.8 pwm=0.710 | |
| Stats 489154.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279424 bytes_read=18409785 bytes_retransmit=9 bytes_invalid=0 send_seq=486611 receive_seq=486611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004325 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.36 cputime=4100.128 memavail=3620088 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.1 pwm=0.650 | |
| Stats 489155.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279430 bytes_read=18409992 bytes_retransmit=9 bytes_invalid=0 send_seq=486612 receive_seq=486612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004279 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4100.147 memavail=3619928 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.4 pwm=0.650 | |
| Stats 489156.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279436 bytes_read=18410199 bytes_retransmit=9 bytes_invalid=0 send_seq=486613 receive_seq=486613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004247 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4100.168 memavail=3620044 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.5 pwm=0.650 | |
| Stats 489157.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279458 bytes_read=18410442 bytes_retransmit=9 bytes_invalid=0 send_seq=486615 receive_seq=486615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004328 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4100.192 memavail=3619932 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.8 pwm=0.585 | |
| Stats 489158.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279464 bytes_read=18410649 bytes_retransmit=9 bytes_invalid=0 send_seq=486616 receive_seq=486616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004269 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.33 cputime=4100.214 memavail=3619892 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.2 pwm=0.585 | |
| Stats 489159.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279470 bytes_read=18410842 bytes_retransmit=9 bytes_invalid=0 send_seq=486617 receive_seq=486617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004321 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.33 cputime=4100.234 memavail=3619788 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.3 pwm=0.585 | |
| Stats 489160.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279476 bytes_read=18411080 bytes_retransmit=9 bytes_invalid=0 send_seq=486618 receive_seq=486618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004335 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.254 memavail=3620052 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.7 pwm=0.585 | |
| Stats 489161.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279498 bytes_read=18411306 bytes_retransmit=9 bytes_invalid=0 send_seq=486620 receive_seq=486620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004311 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4100.275 memavail=3619756 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.2 pwm=0.563 | |
| Stats 489162.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279504 bytes_read=18411490 bytes_retransmit=9 bytes_invalid=0 send_seq=486621 receive_seq=486621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004274 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.295 memavail=3619696 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.563 | |
| Stats 489163.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279510 bytes_read=18411716 bytes_retransmit=9 bytes_invalid=0 send_seq=486622 receive_seq=486622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004257 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4100.316 memavail=3619704 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.3 pwm=0.563 | |
| Stats 489164.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279516 bytes_read=18411923 bytes_retransmit=9 bytes_invalid=0 send_seq=486623 receive_seq=486623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004172 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.30 cputime=4100.337 memavail=3619688 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.9 pwm=0.563 | |
| Stats 489165.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279538 bytes_read=18412121 bytes_retransmit=9 bytes_invalid=0 send_seq=486625 receive_seq=486625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004207 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.28 cputime=4100.359 memavail=3619728 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.9 pwm=0.561 | |
| Stats 489166.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279544 bytes_read=18412373 bytes_retransmit=9 bytes_invalid=0 send_seq=486626 receive_seq=486626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004292 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4100.380 memavail=3619652 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.0 pwm=0.561 | |
| Stats 489167.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279550 bytes_read=18412580 bytes_retransmit=9 bytes_invalid=0 send_seq=486627 receive_seq=486627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004223 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4100.400 memavail=3619716 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.561 | |
| Stats 489168.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279556 bytes_read=18412773 bytes_retransmit=9 bytes_invalid=0 send_seq=486628 receive_seq=486628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004234 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.28 cputime=4100.423 memavail=3619924 print_time=60273.846 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.561 | |
| Stats 489169.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279562 bytes_read=18413011 bytes_retransmit=9 bytes_invalid=0 send_seq=486629 receive_seq=486629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.28 cputime=4100.445 memavail=3619876 print_time=60757.123 buffer_time=0.060 print_stall=0 extruder: target=0 temp=249.4 pwm=0.561 | |
| Stats 489170.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279581 bytes_read=18413223 bytes_retransmit=9 bytes_invalid=0 send_seq=486631 receive_seq=486631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004225 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.42 cputime=4100.468 memavail=3619948 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=249.5 pwm=0.000 | |
| Stats 489171.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279587 bytes_read=18413430 bytes_retransmit=9 bytes_invalid=0 send_seq=486632 receive_seq=486632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004307 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.42 cputime=4100.488 memavail=3619868 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=249.6 pwm=0.000 | |
| Stats 489172.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279593 bytes_read=18413668 bytes_retransmit=9 bytes_invalid=0 send_seq=486633 receive_seq=486633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004341 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4100.509 memavail=3619876 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=249.4 pwm=0.000 | |
| Stats 489173.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279599 bytes_read=18413875 bytes_retransmit=9 bytes_invalid=0 send_seq=486634 receive_seq=486634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004371 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.42 cputime=4100.530 memavail=3619868 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=249.3 pwm=0.000 | |
| Stats 489174.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279605 bytes_read=18414068 bytes_retransmit=9 bytes_invalid=0 send_seq=486635 receive_seq=486635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004326 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=4100.553 memavail=3619940 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=248.7 pwm=0.000 | |
| Stats 489175.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279611 bytes_read=18414306 bytes_retransmit=9 bytes_invalid=0 send_seq=486636 receive_seq=486636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4100.574 memavail=3619900 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=248.2 pwm=0.000 | |
| Stats 489176.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279617 bytes_read=18414527 bytes_retransmit=9 bytes_invalid=0 send_seq=486637 receive_seq=486637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004280 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4100.596 memavail=3619812 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=247.3 pwm=0.000 | |
| Stats 489177.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279623 bytes_read=18414720 bytes_retransmit=9 bytes_invalid=0 send_seq=486638 receive_seq=486638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004301 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4100.616 memavail=3619788 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=246.1 pwm=0.000 | |
| Stats 489178.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279629 bytes_read=18414958 bytes_retransmit=9 bytes_invalid=0 send_seq=486639 receive_seq=486639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004225 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4100.637 memavail=3619868 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=245.1 pwm=0.000 | |
| Stats 489179.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279635 bytes_read=18415165 bytes_retransmit=9 bytes_invalid=0 send_seq=486640 receive_seq=486640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004221 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4100.656 memavail=3620012 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=243.9 pwm=0.000 | |
| Stats 489180.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279641 bytes_read=18415358 bytes_retransmit=9 bytes_invalid=0 send_seq=486641 receive_seq=486641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4100.676 memavail=3619792 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=242.5 pwm=0.000 | |
| Stats 489181.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279647 bytes_read=18415610 bytes_retransmit=9 bytes_invalid=0 send_seq=486642 receive_seq=486642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004189 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4100.699 memavail=3619964 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=241.2 pwm=0.000 | |
| Stats 489182.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279653 bytes_read=18415817 bytes_retransmit=9 bytes_invalid=0 send_seq=486643 receive_seq=486643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4100.719 memavail=3619924 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=239.3 pwm=0.000 | |
| Stats 489183.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279659 bytes_read=18416010 bytes_retransmit=9 bytes_invalid=0 send_seq=486644 receive_seq=486644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004256 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4100.739 memavail=3619828 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=237.9 pwm=0.000 | |
| Stats 489184.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279665 bytes_read=18416248 bytes_retransmit=9 bytes_invalid=0 send_seq=486645 receive_seq=486645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004250 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4100.759 memavail=3619852 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=236.3 pwm=0.000 | |
| Stats 489185.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279677 bytes_read=18416471 bytes_retransmit=9 bytes_invalid=0 send_seq=486647 receive_seq=486647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004320 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.32 cputime=4100.780 memavail=3619884 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=234.1 pwm=0.000 | |
| Stats 489186.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279683 bytes_read=18416664 bytes_retransmit=9 bytes_invalid=0 send_seq=486648 receive_seq=486648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004361 heater_bed: target=0 temp=26.2 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4100.800 memavail=3619876 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=232.5 pwm=0.000 | |
| Stats 489187.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279689 bytes_read=18416894 bytes_retransmit=9 bytes_invalid=0 send_seq=486649 receive_seq=486649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004403 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4100.821 memavail=3619908 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=230.9 pwm=0.000 | |
| Stats 489188.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279695 bytes_read=18417101 bytes_retransmit=9 bytes_invalid=0 send_seq=486650 receive_seq=486650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004320 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4100.842 memavail=3619892 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=228.9 pwm=0.000 | |
| Stats 489189.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279701 bytes_read=18417294 bytes_retransmit=9 bytes_invalid=0 send_seq=486651 receive_seq=486651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4100.862 memavail=3619812 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=227.2 pwm=0.000 | |
| Stats 489190.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279707 bytes_read=18417532 bytes_retransmit=9 bytes_invalid=0 send_seq=486652 receive_seq=486652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004253 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.884 memavail=3619896 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=225.3 pwm=0.000 | |
| Stats 489191.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279713 bytes_read=18417739 bytes_retransmit=9 bytes_invalid=0 send_seq=486653 receive_seq=486653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004346 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.905 memavail=3619876 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=223.3 pwm=0.000 | |
| Stats 489192.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279719 bytes_read=18417946 bytes_retransmit=9 bytes_invalid=0 send_seq=486654 receive_seq=486654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004291 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.934 memavail=3619968 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=221.8 pwm=0.000 | |
| Stats 489193.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279725 bytes_read=18418184 bytes_retransmit=9 bytes_invalid=0 send_seq=486655 receive_seq=486655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004205 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.959 memavail=3619880 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.9 pwm=0.000 | |
| Stats 489194.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279731 bytes_read=18418391 bytes_retransmit=9 bytes_invalid=0 send_seq=486656 receive_seq=486656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.30 cputime=4100.980 memavail=3619960 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.8 pwm=0.000 | |
| Stats 489195.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279737 bytes_read=18418584 bytes_retransmit=9 bytes_invalid=0 send_seq=486657 receive_seq=486657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.001 memavail=3619904 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.0 pwm=0.000 | |
| Stats 489196.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279743 bytes_read=18418822 bytes_retransmit=9 bytes_invalid=0 send_seq=486658 receive_seq=486658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004217 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.023 memavail=3619948 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=214.3 pwm=0.000 | |
| Stats 489197.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279749 bytes_read=18419043 bytes_retransmit=9 bytes_invalid=0 send_seq=486659 receive_seq=486659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004278 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.044 memavail=3620012 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.0 pwm=0.000 | |
| Stats 489198.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279755 bytes_read=18419236 bytes_retransmit=9 bytes_invalid=0 send_seq=486660 receive_seq=486660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004209 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.064 memavail=3619884 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.2 pwm=0.000 | |
| Stats 489199.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279761 bytes_read=18419474 bytes_retransmit=9 bytes_invalid=0 send_seq=486661 receive_seq=486661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004188 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.086 memavail=3620028 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.7 pwm=0.000 | |
| Stats 489200.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279767 bytes_read=18419681 bytes_retransmit=9 bytes_invalid=0 send_seq=486662 receive_seq=486662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004249 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.41 cputime=4101.108 memavail=3620404 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.5 pwm=0.000 | |
| Stats 489201.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279773 bytes_read=18419874 bytes_retransmit=9 bytes_invalid=0 send_seq=486663 receive_seq=486663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004181 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.41 cputime=4101.128 memavail=3620596 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.7 pwm=0.000 | |
| Stats 489202.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279779 bytes_read=18420126 bytes_retransmit=9 bytes_invalid=0 send_seq=486664 receive_seq=486664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004159 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.41 cputime=4101.149 memavail=3620332 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.3 pwm=0.000 | |
| Stats 489203.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279785 bytes_read=18420333 bytes_retransmit=9 bytes_invalid=0 send_seq=486665 receive_seq=486665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004199 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.41 cputime=4101.170 memavail=3620444 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.0 pwm=0.000 | |
| Stats 489204.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279791 bytes_read=18420526 bytes_retransmit=9 bytes_invalid=0 send_seq=486666 receive_seq=486666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004295 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.7 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.41 cputime=4101.190 memavail=3620484 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.3 pwm=0.000 | |
| Stats 489205.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279797 bytes_read=18420764 bytes_retransmit=9 bytes_invalid=0 send_seq=486667 receive_seq=486667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004317 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4101.212 memavail=3620396 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.7 pwm=0.000 | |
| Stats 489206.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279803 bytes_read=18420971 bytes_retransmit=9 bytes_invalid=0 send_seq=486668 receive_seq=486668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004398 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4101.233 memavail=3620664 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.0 pwm=0.000 | |
| Stats 489207.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279809 bytes_read=18421178 bytes_retransmit=9 bytes_invalid=0 send_seq=486669 receive_seq=486669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004394 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=4101.254 memavail=3620504 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.0 pwm=0.000 | |
| Stats 489208.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279815 bytes_read=18421416 bytes_retransmit=9 bytes_invalid=0 send_seq=486670 receive_seq=486670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004483 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4101.275 memavail=3620440 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.4 pwm=0.000 | |
| Stats 489209.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279821 bytes_read=18421622 bytes_retransmit=9 bytes_invalid=0 send_seq=486671 receive_seq=486671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004553 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.38 cputime=4101.299 memavail=3620592 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.1 pwm=0.000 | |
| Stats 489210.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279827 bytes_read=18421802 bytes_retransmit=9 bytes_invalid=0 send_seq=486672 receive_seq=486672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004498 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.35 cputime=4101.318 memavail=3620400 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.8 pwm=0.000 | |
| Stats 489211.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279833 bytes_read=18422032 bytes_retransmit=9 bytes_invalid=0 send_seq=486673 receive_seq=486673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004500 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.35 cputime=4101.339 memavail=3620496 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.1 pwm=0.000 | |
| Stats 489212.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279839 bytes_read=18422253 bytes_retransmit=9 bytes_invalid=0 send_seq=486674 receive_seq=486674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004447 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.35 cputime=4101.361 memavail=3620376 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.2 pwm=0.000 | |
| Stats 489213.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279845 bytes_read=18422461 bytes_retransmit=9 bytes_invalid=0 send_seq=486675 receive_seq=486675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004538 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.35 cputime=4101.380 memavail=3620384 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.9 pwm=0.000 | |
| Stats 489214.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279851 bytes_read=18422684 bytes_retransmit=9 bytes_invalid=0 send_seq=486676 receive_seq=486676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004436 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.35 cputime=4101.400 memavail=3620344 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.2 pwm=0.000 | |
| Stats 489215.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279857 bytes_read=18422891 bytes_retransmit=9 bytes_invalid=0 send_seq=486677 receive_seq=486677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004514 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.32 cputime=4101.422 memavail=3620472 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.4 pwm=0.000 | |
| Stats 489216.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279863 bytes_read=18423099 bytes_retransmit=9 bytes_invalid=0 send_seq=486678 receive_seq=486678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004599 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.32 cputime=4101.442 memavail=3620440 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.9 pwm=0.000 | |
| Stats 489217.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279869 bytes_read=18423336 bytes_retransmit=9 bytes_invalid=0 send_seq=486679 receive_seq=486679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004502 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4101.463 memavail=3620488 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.5 pwm=0.000 | |
| Stats 489218.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279875 bytes_read=18423543 bytes_retransmit=9 bytes_invalid=0 send_seq=486680 receive_seq=486680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004465 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.32 cputime=4101.485 memavail=3620652 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.4 pwm=0.000 | |
| Stats 489219.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279881 bytes_read=18423751 bytes_retransmit=9 bytes_invalid=0 send_seq=486681 receive_seq=486681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004372 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.32 cputime=4101.505 memavail=3620436 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.1 pwm=0.000 | |
| Stats 489220.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279887 bytes_read=18423974 bytes_retransmit=9 bytes_invalid=0 send_seq=486682 receive_seq=486682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004367 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.29 cputime=4101.526 memavail=3620716 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.8 pwm=0.000 | |
| Stats 489221.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279893 bytes_read=18424181 bytes_retransmit=9 bytes_invalid=0 send_seq=486683 receive_seq=486683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004335 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.29 cputime=4101.546 memavail=3620588 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000 | |
| Stats 489222.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279899 bytes_read=18424403 bytes_retransmit=9 bytes_invalid=0 send_seq=486684 receive_seq=486684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004385 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.29 cputime=4101.566 memavail=3620516 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.5 pwm=0.000 | |
| Stats 489223.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279905 bytes_read=18424626 bytes_retransmit=9 bytes_invalid=0 send_seq=486685 receive_seq=486685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004311 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.29 cputime=4101.587 memavail=3620684 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.3 pwm=0.000 | |
| Stats 489224.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279911 bytes_read=18424833 bytes_retransmit=9 bytes_invalid=0 send_seq=486686 receive_seq=486686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004275 heater_bed: target=0 temp=26.3 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.29 cputime=4101.608 memavail=3620580 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.5 pwm=0.000 | |
| Stats 489225.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279917 bytes_read=18425041 bytes_retransmit=9 bytes_invalid=0 send_seq=486687 receive_seq=486687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004373 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.629 memavail=3620436 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.2 pwm=0.000 | |
| Stats 489226.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279923 bytes_read=18425264 bytes_retransmit=9 bytes_invalid=0 send_seq=486688 receive_seq=486688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004413 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.650 memavail=3620476 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.8 pwm=0.000 | |
| Stats 489227.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279929 bytes_read=18425485 bytes_retransmit=9 bytes_invalid=0 send_seq=486689 receive_seq=486689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004484 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.27 cputime=4101.671 memavail=3620412 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.1 pwm=0.000 | |
| Stats 489228.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279935 bytes_read=18425693 bytes_retransmit=9 bytes_invalid=0 send_seq=486690 receive_seq=486690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004476 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=4101.691 memavail=3620572 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.9 pwm=0.000 | |
| Stats 489229.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279941 bytes_read=18425916 bytes_retransmit=9 bytes_invalid=0 send_seq=486691 receive_seq=486691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004475 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.27 cputime=4101.712 memavail=3620452 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.8 pwm=0.000 | |
| Stats 489230.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279947 bytes_read=18426123 bytes_retransmit=9 bytes_invalid=0 send_seq=486692 receive_seq=486692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004384 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.25 cputime=4101.733 memavail=3620652 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.9 pwm=0.000 | |
| Stats 489231.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279953 bytes_read=18426331 bytes_retransmit=9 bytes_invalid=0 send_seq=486693 receive_seq=486693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004338 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.25 cputime=4101.754 memavail=3620648 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.7 pwm=0.000 | |
| Stats 489232.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279959 bytes_read=18426568 bytes_retransmit=9 bytes_invalid=0 send_seq=486694 receive_seq=486694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004259 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.25 cputime=4101.775 memavail=3620616 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.4 pwm=0.000 | |
| Stats 489233.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279965 bytes_read=18426771 bytes_retransmit=9 bytes_invalid=0 send_seq=486695 receive_seq=486695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004313 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.25 cputime=4101.795 memavail=3620576 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.9 pwm=0.000 | |
| Stats 489234.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279971 bytes_read=18426965 bytes_retransmit=9 bytes_invalid=0 send_seq=486696 receive_seq=486696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004359 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.25 cputime=4101.815 memavail=3620784 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.7 pwm=0.000 | |
| Stats 489235.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279977 bytes_read=18427184 bytes_retransmit=9 bytes_invalid=0 send_seq=486697 receive_seq=486697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4101.839 memavail=3620720 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.7 pwm=0.000 | |
| Stats 489236.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279983 bytes_read=18427391 bytes_retransmit=9 bytes_invalid=0 send_seq=486698 receive_seq=486698 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004310 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.23 cputime=4101.860 memavail=3620644 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.1 pwm=0.000 | |
| Stats 489237.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279989 bytes_read=18427613 bytes_retransmit=9 bytes_invalid=0 send_seq=486699 receive_seq=486699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004386 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4101.880 memavail=3620548 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.8 pwm=0.000 | |
| Stats 489238.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18279995 bytes_read=18427836 bytes_retransmit=9 bytes_invalid=0 send_seq=486700 receive_seq=486700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004298 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4101.900 memavail=3620684 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.7 pwm=0.000 | |
| Stats 489239.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280001 bytes_read=18428043 bytes_retransmit=9 bytes_invalid=0 send_seq=486701 receive_seq=486701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004371 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4101.920 memavail=3620572 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.2 pwm=0.000 | |
| Stats 489240.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280007 bytes_read=18428251 bytes_retransmit=9 bytes_invalid=0 send_seq=486702 receive_seq=486702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004428 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4101.942 memavail=3620604 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.0 pwm=0.000 | |
| Stats 489241.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280013 bytes_read=18428474 bytes_retransmit=9 bytes_invalid=0 send_seq=486703 receive_seq=486703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004394 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4101.963 memavail=3620576 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.8 pwm=0.000 | |
| Stats 489242.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280019 bytes_read=18428695 bytes_retransmit=9 bytes_invalid=0 send_seq=486704 receive_seq=486704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004457 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4101.981 memavail=3620988 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.5 pwm=0.000 | |
| Stats 489243.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280025 bytes_read=18428903 bytes_retransmit=9 bytes_invalid=0 send_seq=486705 receive_seq=486705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004396 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4102.001 memavail=3621148 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.4 pwm=0.000 | |
| Stats 489244.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280031 bytes_read=18429126 bytes_retransmit=9 bytes_invalid=0 send_seq=486706 receive_seq=486706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004391 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4102.022 memavail=3620984 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000 | |
| Stats 489245.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280037 bytes_read=18429333 bytes_retransmit=9 bytes_invalid=0 send_seq=486707 receive_seq=486707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004430 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.19 cputime=4102.052 memavail=3620880 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.9 pwm=0.000 | |
| Stats 489246.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280049 bytes_read=18429557 bytes_retransmit=9 bytes_invalid=0 send_seq=486709 receive_seq=486709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004358 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.19 cputime=4102.073 memavail=3621000 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.8 pwm=0.000 | |
| Stats 489247.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280055 bytes_read=18429794 bytes_retransmit=9 bytes_invalid=0 send_seq=486710 receive_seq=486710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004318 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.19 cputime=4102.094 memavail=3621220 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.6 pwm=0.000 | |
| Stats 489248.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280061 bytes_read=18430001 bytes_retransmit=9 bytes_invalid=0 send_seq=486711 receive_seq=486711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004384 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.19 cputime=4102.115 memavail=3621132 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.5 pwm=0.000 | |
| Stats 489249.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280067 bytes_read=18430209 bytes_retransmit=9 bytes_invalid=0 send_seq=486712 receive_seq=486712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004472 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.19 cputime=4102.135 memavail=3621140 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.5 pwm=0.000 | |
| Stats 489250.0: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280073 bytes_read=18430432 bytes_retransmit=9 bytes_invalid=0 send_seq=486713 receive_seq=486713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004479 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.18 cputime=4102.156 memavail=3621204 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.5 pwm=0.000 | |
| Stats 489251.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280079 bytes_read=18430639 bytes_retransmit=9 bytes_invalid=0 send_seq=486714 receive_seq=486714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004494 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.18 cputime=4102.178 memavail=3621144 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.2 pwm=0.000 | |
| Stats 489252.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280085 bytes_read=18430861 bytes_retransmit=9 bytes_invalid=0 send_seq=486715 receive_seq=486715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004581 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.18 cputime=4102.202 memavail=3621080 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.4 pwm=0.000 | |
| Stats 489253.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280091 bytes_read=18431098 bytes_retransmit=9 bytes_invalid=0 send_seq=486716 receive_seq=486716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004578 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.18 cputime=4102.223 memavail=3621152 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.9 pwm=0.000 | |
| Stats 489254.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280097 bytes_read=18431291 bytes_retransmit=9 bytes_invalid=0 send_seq=486717 receive_seq=486717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004551 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.18 cputime=4102.245 memavail=3621000 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.1 pwm=0.000 | |
| Stats 489255.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280103 bytes_read=18431499 bytes_retransmit=9 bytes_invalid=0 send_seq=486718 receive_seq=486718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004603 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.16 cputime=4102.265 memavail=3621064 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.0 pwm=0.000 | |
| Stats 489256.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280109 bytes_read=18431736 bytes_retransmit=9 bytes_invalid=0 send_seq=486719 receive_seq=486719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004558 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.16 cputime=4102.286 memavail=3621124 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.9 pwm=0.000 | |
| Stats 489257.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280115 bytes_read=18431938 bytes_retransmit=9 bytes_invalid=0 send_seq=486720 receive_seq=486720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004451 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.16 cputime=4102.306 memavail=3621252 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.0 pwm=0.000 | |
| Stats 489258.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280121 bytes_read=18432132 bytes_retransmit=9 bytes_invalid=0 send_seq=486721 receive_seq=486721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004429 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.16 cputime=4102.326 memavail=3621044 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.9 pwm=0.000 | |
| Stats 489259.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280127 bytes_read=18432367 bytes_retransmit=9 bytes_invalid=0 send_seq=486722 receive_seq=486722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004428 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.16 cputime=4102.347 memavail=3621108 print_time=60757.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.9 pwm=0.000 | |
| Starting SD card print (position 0) | |
| tmc stepper_y: needs_home_current_change False | |
| tmc stepper_x: needs_home_current_change False | |
| Stats 489260.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18280133 bytes_read=18432560 bytes_retransmit=9 bytes_invalid=0 send_seq=486723 receive_seq=486723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=180004365 sd_pos=22420 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4102.395 memavail=3621176 print_time=60848.433 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.7 pwm=0.000 | |
| Stats 489261.1: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18281531 bytes_read=18433870 bytes_retransmit=9 bytes_invalid=0 send_seq=486795 receive_seq=486795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004348 sd_pos=22420 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4102.530 memavail=3620756 print_time=60849.333 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.9 pwm=0.000 | |
| Stats 489262.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=18282146 bytes_read=18434530 bytes_retransmit=9 bytes_invalid=0 send_seq=486827 receive_seq=486827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004312 sd_pos=22420 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4102.590 memavail=3620644 print_time=60850.333 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.0 pwm=0.000 | |
| Stats 489263.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=18282764 bytes_read=18435142 bytes_retransmit=9 bytes_invalid=0 send_seq=486861 receive_seq=486861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004341 sd_pos=22420 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.8 pwm=0.000 sysload=1.23 cputime=4102.646 memavail=3620772 print_time=60851.333 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.9 pwm=0.000 | |
| Stats 489264.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=18283382 bytes_read=18435784 bytes_retransmit=9 bytes_invalid=0 send_seq=486895 receive_seq=486895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004241 sd_pos=22420 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.23 cputime=4102.705 memavail=3620652 print_time=60852.333 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.9 pwm=0.000 | |
| Stats 489265.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=18283997 bytes_read=18436429 bytes_retransmit=9 bytes_invalid=0 send_seq=486927 receive_seq=486927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004323 sd_pos=22420 heater_bed: target=0 temp=26.5 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4102.765 memavail=3620816 print_time=60853.333 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.0 pwm=0.000 | |
| Transition to shutdown state: Shutdown due to webhooks request | |
| Dumping gcode input 0 blocks | |
| Dumping 20 requests for client 547626460560 | |
| Received 428432.305385: b'{"id": 547984233040, "method": "gcode/script", "params": {"script": "G91\\nG1 Z+25 F1500"}}' | |
| Received 428438.099418: b'{"id": 547984095376, "method": "gcode/script", "params": {"script": "M84"}}' | |
| Received 428507.586840: b'{"id": 547984084496, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Part Studio 2 - Part 1 (1)_PETG_24m2s.gcode\\""}}' | |
| Received 434727.051239: b'{"id": 547974782672, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.025 MOVE=1"}}' | |
| Received 434728.797560: b'{"id": 547974220496, "method": "gcode/script", "params": {"script": "SDCARD_RESET_FILE"}}' | |
| Received 434753.633702: b'{"id": 548297226640, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Part Studio 2 - Part 1 (2)_PETG_30m36s.gcode\\""}}' | |
| Received 441073.863038: b'{"id": 548302694800, "method": "gcode/script", "params": {"script": "SDCARD_RESET_FILE"}}' | |
| Received 441643.146580: b'{"id": 548297263696, "method": "gcode/script", "params": {"script": "SETUP_FILAMENT name=petg extruder=240 bed=75 chamber=55 pa_inner_wall=0.03 pa_outer_wall=0.04 pa_infill=0.0"}}' | |
| Received 441651.072911: b'{"id": 548297458320, "method": "gcode/script", "params": {"script": "SET_FILAMENT name=petg"}}' | |
| Received 441719.031956: b'{"id": 548302688464, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Part Studio 1 - Part 3_PETG_1h24m.gcode\\""}}' | |
| Received 443222.037194: b'{"id": 548302820368, "method": "pause_resume/pause", "params": {}}' | |
| Received 443223.388285: b'{"id": 547974802256, "method": "pause_resume/cancel", "params": {}}' | |
| Received 443266.713358: b'{"id": 547983909456, "method": "gcode/script", "params": {"script": "SETUP_FILAMENT name=petg extruder=240 bed=75 chamber=0 pa_inner_wall=0.03 pa_outer_wall=0.04 pa_infill=0.0"}}' | |
| Received 443296.875272: b'{"id": 547984033168, "method": "gcode/script", "params": {"script": "M84"}}' | |
| Received 487807.255827: b'{"id": 547974390288, "method": "gcode/script", "params": {"script": "M106 S0"}}' | |
| Received 488677.040679: b'{"id": 548298717648, "method": "gcode/script", "params": {"script": "SET_FILAMENT name=pc"}}' | |
| Received 488685.530781: b'{"id": 547974798672, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=250"}}' | |
| Received 489168.795470: b'{"id": 548297330704, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0"}}' | |
| Received 489260.034255: b'{"id": 548300976208, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Stealthburner CPAP Main Body_PC_1h33m.gcode\\""}}' | |
| Received 489266.003933: b'{"id": 548302339920, "method": "emergency_stop", "params": {}}' | |
| Virtual sdcard (21396): 'CCCGEEEIIIYQQQgghhBBCCCGEEEIIIYQQQgghhBBCCC\r\n; GEEEIIIYQQQgghhBBCCCGEEEIIIYQQQgghhBBCCCGEEEIIIYQQQgghhBBCCCGEEEIIIYQQQgghhBBC\r\n; CCGEEEIIIYQQQgghhBBCCCGEEEIIIYQQQgghhBBCCCGEEEIIIYQQQuYi/w3/R7nOAQZ6jQAAAABJRU\r\n; 5ErkJggg==\r\n; thumbnail end\r\n; THUMBNAIL_BLOCK_END\r\n\r\n; external perimeters extrusion width = 0.62mm\r\n; perimeters extrusion width = 0.62mm\r\n; infill extrusion width = 0.80mm\r\n; solid infill extrusion width = 0.62mm\r\n; top infill extrusion width = 0.62mm\r\n; support material extrusion width = 0.62mm\r\n; first layer extrusion width = 0.62mm\r\n\r\n; EXECUTABLE_BLOCK_START\r\nEXCLUDE_OBJECT_DEFINE NAME=Stealthburner_CPAP_Main_Body_id_0_copy_0 CENTER=175,175 POLYGON=[[142.431,136.959],[146.462,120.321],[153.229,116.958],[157.036,116.009],[192.964,116.009],[196.771,116.958],[203.538,120.321],[207.569,136.959],[203.966,200.384],[154.494,232.434],[154.132,232.665],[152.051,233.991],[149.725,232.114],[147.201,229.046],[147.199,229.041],[145.401,222.102],[145.398,222.087],[142.431,136.959]]\r\nM73 P0 R92\r\n;TYPE:Custom\r\n' | |
| Upcoming (22420): 'PRINT_START\r\nG90\r\nG21\r\nM83 ; use relative distances for extrusion\r\n; Filament gcode\r\nM106 S0 ; disable fan\r\n;LAYER_CHANGE\r\n;Z:0.' | |
| gcode state: absolute_coord=True absolute_extrude=False base_position=[0.0, 0.0, 0.025, 15993.385790000744] last_position=[-175.0, 350.0, 5.5160832322582065, 15998.603650000736] homing_position=[0.0, 0.0, 0.025, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=60.0 | |
| Reactor garbage collection: (442993.347261494, 0.0, 0.0) | |
| MCU 'mcu' shutdown: Command request | |
| clocksync state: mcu_freq=180000000 last_clock=10953686351241 clock_est=(489237.179 10948546286214 180004416.967) min_half_rtt=0.000104 min_rtt_time=487206.758 time_avg=489237.179(843.602) clock_avg=10948546286214.389(151852077892.153) pred_variance=2785275540.266 | |
| Dumping serial stats: bytes_write=18284583 bytes_read=18437024 bytes_retransmit=9 bytes_invalid=0 send_seq=486959 receive_seq=486959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 | |
| Dumping send queue 100 messages | |
| Sent 0 489263.035152 489263.035152 12: seq: 1b, trsync_set_timeout oid=11 clock=1078578358 | |
| Sent 1 489263.035908 489263.035908 21: seq: 1c, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 2 489263.085761 489263.085761 21: seq: 1d, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 3 489263.110115 489263.110115 12: seq: 1e, trsync_set_timeout oid=11 clock=1092078402 | |
| Sent 4 489263.135240 489263.135240 21: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 5 489263.185116 489263.185116 12: seq: 10, trsync_set_timeout oid=11 clock=1105578378 | |
| Sent 6 489263.185931 489263.185931 21: seq: 11, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 7 489263.235758 489263.235758 21: seq: 12, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 8 489263.261138 489263.261138 12: seq: 13, trsync_set_timeout oid=11 clock=1119078358 | |
| Sent 9 489263.285578 489263.285578 21: seq: 14, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 10 489263.335567 489263.335567 28: seq: 15, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1132578358 | |
| Sent 11 489263.385374 489263.385374 21: seq: 16, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 12 489263.411143 489263.411143 12: seq: 17, trsync_set_timeout oid=11 clock=1146078402 | |
| Sent 13 489263.424206 489263.424206 14: seq: 18, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 14 489263.430607 489263.430607 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 15 489263.436240 489263.436240 21: seq: 1a, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 16 489263.437329 489263.437329 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 17 489263.442886 489263.442886 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 18 489263.485225 489263.485225 12: seq: 1d, trsync_set_timeout oid=11 clock=1159578378 | |
| Sent 19 489263.485888 489263.485888 21: seq: 1e, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 20 489263.535599 489263.535599 21: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 21 489263.561058 489263.561058 12: seq: 10, trsync_set_timeout oid=11 clock=1173078368 | |
| Sent 22 489263.585364 489263.585364 21: seq: 11, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 23 489263.635822 489263.635822 28: seq: 12, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1186578348 | |
| Sent 24 489263.685690 489263.685690 21: seq: 13, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 25 489263.711064 489263.711064 12: seq: 14, trsync_set_timeout oid=11 clock=1200078402 | |
| Sent 26 489263.735418 489263.735418 21: seq: 15, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 27 489263.764685 489263.764685 6: seq: 16, get_clock | |
| Sent 28 489263.785417 489263.785417 28: seq: 17, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1213578378 | |
| Sent 29 489263.835617 489263.835617 21: seq: 18, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 30 489263.861064 489263.861064 12: seq: 19, trsync_set_timeout oid=11 clock=1227078368 | |
| Sent 31 489263.886093 489263.886093 21: seq: 1a, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 32 489263.935769 489263.935769 28: seq: 1b, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1240578358 | |
| Sent 33 489263.985657 489263.985657 21: seq: 1c, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 34 489264.011162 489264.011162 12: seq: 1d, trsync_set_timeout oid=11 clock=1254078392 | |
| Sent 35 489264.036526 489264.036526 21: seq: 1e, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 36 489264.085798 489264.085798 28: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1267578378 | |
| Sent 37 489264.135751 489264.135751 21: seq: 10, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 38 489264.161164 489264.161164 12: seq: 11, trsync_set_timeout oid=11 clock=1281078368 | |
| Sent 39 489264.185678 489264.185678 21: seq: 12, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 40 489264.235812 489264.235812 28: seq: 13, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1294578358 | |
| Sent 41 489264.285722 489264.285722 21: seq: 14, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 42 489264.311130 489264.311130 12: seq: 15, trsync_set_timeout oid=11 clock=1308078402 | |
| Sent 43 489264.335465 489264.335465 21: seq: 16, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 44 489264.385602 489264.385602 28: seq: 17, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1321578368 | |
| Sent 45 489264.425417 489264.425417 14: seq: 18, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 46 489264.431053 489264.431053 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 47 489264.435427 489264.435427 21: seq: 1a, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 48 489264.437232 489264.437232 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 49 489264.443041 489264.443041 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 50 489264.461141 489264.461141 12: seq: 1d, trsync_set_timeout oid=11 clock=1335078368 | |
| Sent 51 489264.485842 489264.485842 21: seq: 1e, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 52 489264.535880 489264.535880 28: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1348578358 | |
| Sent 53 489264.585740 489264.585740 21: seq: 10, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 54 489264.611025 489264.611025 12: seq: 11, trsync_set_timeout oid=11 clock=1362078402 | |
| Sent 55 489264.635745 489264.635745 21: seq: 12, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 56 489264.685734 489264.685734 28: seq: 13, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1375578378 | |
| Sent 57 489264.735517 489264.735517 21: seq: 14, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 58 489264.748799 489264.748799 6: seq: 15, get_clock | |
| Sent 59 489264.761048 489264.761048 12: seq: 16, trsync_set_timeout oid=11 clock=1389078362 | |
| Sent 60 489264.785536 489264.785536 21: seq: 17, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 61 489264.835394 489264.835394 28: seq: 18, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1402578358 | |
| Sent 62 489264.885844 489264.885844 21: seq: 19, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 63 489264.911117 489264.911117 12: seq: 1a, trsync_set_timeout oid=11 clock=1416078402 | |
| Sent 64 489264.935872 489264.935872 21: seq: 1b, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 65 489264.985746 489264.985746 28: seq: 1c, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1429578378 | |
| Sent 66 489265.035623 489265.035623 21: seq: 1d, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 67 489265.060199 489265.060199 12: seq: 1e, trsync_set_timeout oid=11 clock=1443078368 | |
| Sent 68 489265.085220 489265.085220 21: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 69 489265.135919 489265.135919 28: seq: 10, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1456578348 | |
| Sent 70 489265.186048 489265.186048 21: seq: 11, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 71 489265.211135 489265.211135 12: seq: 12, trsync_set_timeout oid=11 clock=1470078402 | |
| Sent 72 489265.235284 489265.235284 21: seq: 13, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 73 489265.285070 489265.285070 28: seq: 14, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1483578378 | |
| Sent 74 489265.335300 489265.335300 21: seq: 15, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 75 489265.361177 489265.361177 12: seq: 16, trsync_set_timeout oid=11 clock=1497078368 | |
| Sent 76 489265.385337 489265.385337 21: seq: 17, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 77 489265.426224 489265.426224 14: seq: 18, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 78 489265.432092 489265.432092 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 79 489265.435139 489265.435139 28: seq: 1a, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1510578382 | |
| Sent 80 489265.437874 489265.437874 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 81 489265.444116 489265.444116 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 82 489265.485662 489265.485662 21: seq: 1d, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 83 489265.511061 489265.511061 12: seq: 1e, trsync_set_timeout oid=11 clock=1524078402 | |
| Sent 84 489265.535476 489265.535476 21: seq: 1f, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 85 489265.585102 489265.585102 12: seq: 10, trsync_set_timeout oid=11 clock=1537578368 | |
| Sent 86 489265.585326 489265.585326 21: seq: 11, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 87 489265.635391 489265.635391 21: seq: 12, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 88 489265.660116 489265.660116 12: seq: 13, trsync_set_timeout oid=11 clock=1551078368 | |
| Sent 89 489265.685222 489265.685222 21: seq: 14, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 90 489265.733714 489265.733714 6: seq: 15, get_clock | |
| Sent 91 489265.736203 489265.736203 28: seq: 16, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1564578358 | |
| Sent 92 489265.785182 489265.785182 21: seq: 17, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 93 489265.811079 489265.811079 12: seq: 18, trsync_set_timeout oid=11 clock=1578078402 | |
| Sent 94 489265.835875 489265.835875 21: seq: 19, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 95 489265.885669 489265.885669 28: seq: 1a, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0, trsync_set_timeout oid=11 clock=1591578378 | |
| Sent 96 489265.936096 489265.936096 21: seq: 1b, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 97 489265.961106 489265.961106 12: seq: 1c, trsync_set_timeout oid=11 clock=1605078358 | |
| Sent 98 489265.985874 489265.985874 21: seq: 1d, queue_step oid=9 interval=18750 count=480 add=0, queue_step oid=12 interval=18750 count=480 add=0 | |
| Sent 99 489266.006509 489266.006509 6: seq: 1e, emergency_stop | |
| Dumping receive queue 100 messages | |
| Receive: 0 489262.869987 489262.835810 15: seq: 16, analog_in_state oid=24 next_clock=1056595200 value=31239 | |
| Receive: 1 489262.885052 489262.835810 14: seq: 16, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1006578368 | |
| Receive: 2 489262.949943 489262.936058 14: seq: 19, analog_in_state oid=32 next_clock=1070995200 value=7766 | |
| Receive: 3 489262.959970 489262.936058 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1020078368 | |
| Receive: 4 489263.035048 489262.985815 14: seq: 1b, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1033578358 | |
| Receive: 5 489263.110050 489263.085761 14: seq: 1e, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1047078402 | |
| Receive: 6 489263.119900 489263.110115 15: seq: 1f, analog_in_state oid=19 next_clock=1101595200 value=31202 | |
| Receive: 7 489263.160060 489263.135240 15: seq: 10, analog_in_state oid=23 next_clock=1108795200 value=22024 | |
| Receive: 8 489263.169924 489263.135240 15: seq: 10, analog_in_state oid=24 next_clock=1110595200 value=31236 | |
| Receive: 9 489263.185035 489263.135240 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1060578378 | |
| Receive: 10 489263.249923 489263.235758 14: seq: 13, analog_in_state oid=32 next_clock=1124995200 value=7762 | |
| Receive: 11 489263.259929 489263.235758 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1074078358 | |
| Receive: 12 489263.334954 489263.285578 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1087578358 | |
| Receive: 13 489263.409962 489263.385374 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1101078402 | |
| Receive: 14 489263.420081 489263.411143 15: seq: 18, analog_in_state oid=19 next_clock=1155595200 value=31211 | |
| Receive: 15 489263.429085 489263.424206 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 16 489263.435027 489263.430607 18: seq: 1a, tmcuart_response oid=1 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 17 489263.441897 489263.437329 18: seq: 1c, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 18 489263.447896 489263.442886 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 19 489263.460083 489263.442886 15: seq: 1d, analog_in_state oid=23 next_clock=1162795200 value=22021 | |
| Receive: 20 489263.469997 489263.442886 15: seq: 1d, analog_in_state oid=24 next_clock=1164595200 value=31232 | |
| Receive: 21 489263.485152 489263.442886 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1114578378 | |
| Receive: 22 489263.549903 489263.535599 14: seq: 10, analog_in_state oid=32 next_clock=1178995200 value=7758 | |
| Receive: 23 489263.559918 489263.535599 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1128078368 | |
| Receive: 24 489263.634986 489263.585364 14: seq: 12, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1141578348 | |
| Receive: 25 489263.709925 489263.685690 14: seq: 14, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1155078402 | |
| Receive: 26 489263.719894 489263.711064 15: seq: 15, analog_in_state oid=19 next_clock=1209595200 value=31213 | |
| Receive: 27 489263.759894 489263.735418 15: seq: 16, analog_in_state oid=23 next_clock=1216795200 value=22024 | |
| Receive: 28 489263.764970 489263.764685 11: seq: 17, clock clock=1165141131 | |
| Receive: 29 489263.769901 489263.764685 15: seq: 17, analog_in_state oid=24 next_clock=1218595200 value=31234 | |
| Receive: 30 489263.784939 489263.764685 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1168578378 | |
| Receive: 31 489263.849903 489263.835617 14: seq: 19, analog_in_state oid=32 next_clock=1232995200 value=7750 | |
| Receive: 32 489263.859923 489263.835617 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1182078368 | |
| Receive: 33 489263.934969 489263.886093 14: seq: 1b, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1195578358 | |
| Receive: 34 489264.009988 489263.985657 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1209078392 | |
| Receive: 35 489264.019929 489264.011162 15: seq: 1e, analog_in_state oid=19 next_clock=1263595200 value=31203 | |
| Receive: 36 489264.059998 489264.036526 15: seq: 1f, analog_in_state oid=23 next_clock=1270795200 value=22024 | |
| Receive: 37 489264.069980 489264.036526 15: seq: 1f, analog_in_state oid=24 next_clock=1272595200 value=31238 | |
| Receive: 38 489264.085054 489264.036526 14: seq: 1f, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1222578378 | |
| Receive: 39 489264.149912 489264.135751 14: seq: 11, analog_in_state oid=32 next_clock=1286995200 value=7749 | |
| Receive: 40 489264.159998 489264.135751 14: seq: 11, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1236078368 | |
| Receive: 41 489264.235015 489264.185678 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1249578358 | |
| Receive: 42 489264.309943 489264.285722 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1263078402 | |
| Receive: 43 489264.319882 489264.311130 15: seq: 16, analog_in_state oid=19 next_clock=1317595200 value=31205 | |
| Receive: 44 489264.360009 489264.335465 15: seq: 17, analog_in_state oid=23 next_clock=1324795200 value=22020 | |
| Receive: 45 489264.370077 489264.335465 15: seq: 17, analog_in_state oid=24 next_clock=1326595200 value=31236 | |
| Receive: 46 489264.384988 489264.335465 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1276578368 | |
| Receive: 47 489264.429925 489264.425417 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 48 489264.435918 489264.431053 18: seq: 1a, tmcuart_response oid=1 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 49 489264.441945 489264.437232 18: seq: 1c, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 50 489264.447944 489264.443041 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 51 489264.449924 489264.443041 14: seq: 1d, analog_in_state oid=32 next_clock=1340995200 value=7743 | |
| Receive: 52 489264.459960 489264.443041 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1290078368 | |
| Receive: 53 489264.534991 489264.485842 14: seq: 1f, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1303578358 | |
| Receive: 54 489264.609891 489264.585740 14: seq: 11, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1317078402 | |
| Receive: 55 489264.619957 489264.611025 15: seq: 12, analog_in_state oid=19 next_clock=1371595200 value=31201 | |
| Receive: 56 489264.659942 489264.635745 15: seq: 13, analog_in_state oid=23 next_clock=1378795200 value=22021 | |
| Receive: 57 489264.669942 489264.635745 15: seq: 13, analog_in_state oid=24 next_clock=1380595200 value=31237 | |
| Receive: 58 489264.684980 489264.635745 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1330578378 | |
| Receive: 59 489264.749927 489264.735517 14: seq: 15, analog_in_state oid=32 next_clock=1394995200 value=7740 | |
| Receive: 60 489264.749949 489264.748799 11: seq: 16, clock clock=1342442249 | |
| Receive: 61 489264.759911 489264.748799 14: seq: 16, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1344078362 | |
| Receive: 62 489264.834887 489264.785536 14: seq: 18, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1357578358 | |
| Receive: 63 489264.909950 489264.885844 14: seq: 1a, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1371078402 | |
| Receive: 64 489264.920030 489264.911117 15: seq: 1b, analog_in_state oid=19 next_clock=1425595200 value=31199 | |
| Receive: 65 489264.960018 489264.935872 15: seq: 1c, analog_in_state oid=23 next_clock=1432795200 value=22020 | |
| Receive: 66 489264.969960 489264.935872 15: seq: 1c, analog_in_state oid=24 next_clock=1434595200 value=31238 | |
| Receive: 67 489264.984989 489264.935872 14: seq: 1c, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1384578378 | |
| Receive: 68 489265.050004 489265.035623 14: seq: 1e, analog_in_state oid=32 next_clock=1448995200 value=7736 | |
| Receive: 69 489265.060121 489265.035623 14: seq: 1e, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1398078368 | |
| Receive: 70 489265.134941 489265.085220 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1411578348 | |
| Receive: 71 489265.209974 489265.186048 14: seq: 12, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1425078402 | |
| Receive: 72 489265.219933 489265.211135 15: seq: 13, analog_in_state oid=19 next_clock=1479595200 value=31205 | |
| Receive: 73 489265.260005 489265.235284 15: seq: 14, analog_in_state oid=23 next_clock=1486795200 value=22021 | |
| Receive: 74 489265.269983 489265.235284 15: seq: 14, analog_in_state oid=24 next_clock=1488595200 value=31237 | |
| Receive: 75 489265.284909 489265.235284 14: seq: 14, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1438578378 | |
| Receive: 76 489265.349980 489265.335300 14: seq: 16, analog_in_state oid=32 next_clock=1502995200 value=7733 | |
| Receive: 77 489265.359989 489265.335300 14: seq: 16, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1452078368 | |
| Receive: 78 489265.431032 489265.426224 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 79 489265.434951 489265.432092 14: seq: 1a, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1465578382 | |
| Receive: 80 489265.436835 489265.435139 18: seq: 1b, tmcuart_response oid=1 read=b'\n\xfa\xef-\x80>\x02\x08\xa0\xfd' | |
| Receive: 81 489265.443063 489265.437874 18: seq: 1c, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 82 489265.449055 489265.444116 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 83 489265.509897 489265.485662 14: seq: 1e, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1479078402 | |
| Receive: 84 489265.519969 489265.511061 15: seq: 1f, analog_in_state oid=19 next_clock=1533595200 value=31206 | |
| Receive: 85 489265.559957 489265.535476 15: seq: 10, analog_in_state oid=23 next_clock=1540795200 value=22026 | |
| Receive: 86 489265.570069 489265.535476 15: seq: 10, analog_in_state oid=24 next_clock=1542595200 value=31234 | |
| Receive: 87 489265.585020 489265.535476 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1492578368 | |
| Receive: 88 489265.650016 489265.635391 14: seq: 13, analog_in_state oid=32 next_clock=1556995200 value=7725 | |
| Receive: 89 489265.660051 489265.635391 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1506078368 | |
| Receive: 90 489265.734961 489265.685222 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1519578358 | |
| Receive: 91 489265.735015 489265.733714 11: seq: 16, clock clock=1519746441 | |
| Receive: 92 489265.809937 489265.785182 14: seq: 18, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1533078402 | |
| Receive: 93 489265.819876 489265.811079 15: seq: 19, analog_in_state oid=19 next_clock=1587595200 value=31202 | |
| Receive: 94 489265.859936 489265.835875 15: seq: 1a, analog_in_state oid=23 next_clock=1594795200 value=22024 | |
| Receive: 95 489265.869875 489265.835875 15: seq: 1a, analog_in_state oid=24 next_clock=1596595200 value=31238 | |
| Receive: 96 489265.884874 489265.835875 14: seq: 1a, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1546578378 | |
| Receive: 97 489265.949913 489265.936096 14: seq: 1c, analog_in_state oid=32 next_clock=1610995200 value=7723 | |
| Receive: 98 489265.959945 489265.936096 14: seq: 1c, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=1560078358 | |
| Receive: 99 489266.007936 489266.006509 12: seq: 1f, shutdown clock=1568705379 static_string_id=Command request | |
| Dumping stepper 'stepper_x' (mcu) 5 queue_step: | |
| queue_step 0: t=10953713360021 p=83436 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 1: t=10953722360021 p=83916 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 2: t=10953731360021 p=84396 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 3: t=10953740360021 p=84876 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 4: t=10953749360021 p=85356 i=18750 c=480 a=0 a2=0 s=0 | |
| Dumping stepper 'stepper_y' (mcu) 5 queue_step: | |
| queue_step 0: t=10953713360021 p=26380 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 1: t=10953722360021 p=26860 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 2: t=10953731360021 p=27340 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 3: t=10953740360021 p=27820 i=18750 c=480 a=0 a2=0 s=0 | |
| queue_step 4: t=10953749360021 p=28300 i=18750 c=480 a=0 a2=0 s=0 | |
| Dumping trapq 'toolhead' 1 moves: | |
| move 0: pt=60848.444035 mt=8.739091 sv=60.000000 a=0.000000 sp=(-174.672727,350.000000,5.751470) ar=(1.000000,0.000000,0.000000) | |
| Requested toolhead position at shutdown time 60854.085057: (163.78859060668248, 350.0, 5.751469933248006) | |
| Stats 489266.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=18284640 bytes_read=18437091 bytes_retransmit=9 bytes_invalid=0 send_seq=486964 receive_seq=486964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004416 sd_pos=22420 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4102.854 memavail=3620704 print_time=60854.349 buffer_time=0.200 print_stall=0 extruder: target=0 temp=117.1 pwm=0.000 | |
| Homing failed due to printer shutdown | |
| Homing failed due to printer shutdown | |
| Homing failed due to printer shutdown | |
| Shutdown due to webhooks request | |
| Once the underlying issue is corrected, use the | |
| "FIRMWARE_RESTART" command to reset the firmware, reload the | |
| config, and restart the host software. | |
| Printer is shutdown | |
| virtual_sdcard on_error | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/extras/homing.py", line 433, in cmd_G28 | |
| kin.home(homing_state) | |
| File "/home/orangepi/klipper/klippy/kinematics/corexy.py", line 75, in home | |
| homing_state.home_rails([rail], forcepos, homepos) | |
| File "/home/orangepi/klipper/klippy/extras/homing.py", line 292, in home_rails | |
| hmove.homing_move(homepos, hi.speed) | |
| File "/home/orangepi/klipper/klippy/extras/homing.py", line 193, in homing_move | |
| raise self.printer.command_error(error) | |
| gcode.CommandError: Error during homing x: Unable to obtain 'trsync_state' response | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/extras/virtual_sdcard.py", line 421, in work_handler | |
| self.gcode.run_script(line) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 321, in run_script | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 207, in func | |
| return origfunc(self._get_extended_params(params)) | |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | |
| File "/home/orangepi/klipper/klippy/extras/gcode_macro.py", line 270, in cmd | |
| self.template.run_gcode_from_command(kwparams) | |
| File "/home/orangepi/klipper/klippy/extras/gcode_macro.py", line 79, in run_gcode_from_command | |
| self.gcode.run_script_from_command(self.render(context)) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 314, in run_script_from_command | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/extras/homing_override.py", line 64, in cmd_G28 | |
| self.template.run_gcode_from_command(context) | |
| File "/home/orangepi/klipper/klippy/extras/gcode_macro.py", line 79, in run_gcode_from_command | |
| self.gcode.run_script_from_command(self.render(context)) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 314, in run_script_from_command | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/extras/homing_override.py", line 26, in cmd_G28 | |
| self.prev_G28(gcmd) | |
| File "/home/orangepi/klipper/klippy/extras/homing.py", line 436, in cmd_G28 | |
| raise self.printer.command_error( | |
| gcode.CommandError: Homing failed due to printer shutdown | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/extras/virtual_sdcard.py", line 425, in work_handler | |
| self.gcode.run_script(self.on_error_gcode.render()) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 321, in run_script | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 389, in cmd_default | |
| raise gcmd.error(self.printer.get_state_message()[0]) | |
| gcode.CommandError: Shutdown due to webhooks request | |
| Once the underlying issue is corrected, use the | |
| "FIRMWARE_RESTART" command to reset the firmware, reload the | |
| config, and restart the host software. | |
| Printer is shutdown | |
| Stats 489267.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=18284698 bytes_read=18437345 bytes_retransmit=9 bytes_invalid=0 send_seq=486970 receive_seq=486970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004359 heater_bed: target=0 temp=26.4 pwm=0.000 z_thermal_adjust: temp=25.8 chamber_heater: target=0 temp=25.9 pwm=0.000 sysload=1.21 cputime=4102.900 memavail=3620968 print_time=60854.349 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.4 pwm=0.000 | |
| Attempting MCU 'mcu' reset command | |
| b'Got EOF when reading from device' | |
| webhooks client 547626460560: Disconnected | |
| Restarting printer | |
| Start printer at Sun Aug 4 12:40:39 2024 (1722775239.3 489269.1) | |
| ===== Config file ===== | |
| [respond] | |
| [gcode_macro CHOPPER_TUNE] | |
| description = Vibrations tests to calculate lowest magnitude drivers registers v1.2 | |
| variable_debug = False | |
| variable_inset = 10 | |
| variable_current_change_step = 25 | |
| variable_measure_time = 1250 | |
| variable_required_rpm = [37.5, 150, 1.5] | |
| variable_delay = 500 | |
| gcode = | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| _detect_driver stepper={axis} | |
| _chop_workflow axis={axis} {rawparams} | |
| [gcode_shell_command chop_tune] | |
| command = ~/chopper-resonance-tuner/chopper_plot.sh | |
| timeout = 9999.0 | |
| verbose = True | |
| [gcode_macro _detect_driver] | |
| description = Find which driver is used in configuration | |
| variable_drivers = '2130', '2208', '2209', '2660', '2240', '5160' | |
| variable_driver = 0 | |
| variable_resistor = 0 | |
| gcode = | |
| {% set stepper = 'stepper_' + params.STEPPER|string|lower %} | |
| {% for driver in drivers %} | |
| {% if 'run_current' in printer.configfile.config['tmc' + driver + ' ' + stepper] %} | |
| {action_respond_info('Selected tmc%s for %s' % (driver, stepper))} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=driver VALUE={driver} | |
| {% if driver != '2240' %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].sense_resistor %} | |
| {% else %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].rref %} | |
| {% endif %} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=resistor VALUE={resistor} | |
| {% endif %} | |
| {% endfor %} | |
| [gcode_macro _chop_apply_regs] | |
| variable_registers = 'tbl', 'toff', 'hend', 'hstrt', 'tpfd', 'curr' | |
| variable_amount = 0 | |
| variable_tbl = -1 | |
| variable_toff = -1 | |
| variable_hend = -1 | |
| variable_hstrt = -1 | |
| variable_tpfd = -1 | |
| variable_curr = -1 | |
| gcode = | |
| {% if printer['gcode_macro _chop_apply_regs'][params.FIELD]|int != params.VALUE|int %} | |
| {% for stepper in params.STEPPERS.split('-') %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to {params.VALUE|int} on {stepper} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% for count in range(1, amount + 1) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to { | |
| params.VALUE|int} on {stepper|string + count|string} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper|string + count|string} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={params.FIELD|string|lower} VALUE={params.VALUE|int} | |
| {% endif %} | |
| [gcode_macro _chop_workflow] | |
| description = Calculate process of CHOPPER_TUNE macro | |
| gcode = | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set driver = printer['gcode_macro _detect_driver'].driver|string|lower %} | |
| {% set sense_resistor = printer['gcode_macro _detect_driver'].resistor %} | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set current_change_step = printer['gcode_macro CHOPPER_TUNE'].current_change_step %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set required_rpm = printer['gcode_macro CHOPPER_TUNE'].required_rpm %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| {% set inset = printer['gcode_macro CHOPPER_TUNE'].inset %} | |
| {% set config = printer.configfile.config %} | |
| {% set settings = printer.configfile.settings %} | |
| {% set measure_time = printer['gcode_macro CHOPPER_TUNE'].measure_time / 1000|float %} | |
| {% set delay = printer['gcode_macro CHOPPER_TUNE'].delay|int %} | |
| {% set kinematics = config.printer.kinematics|string %} | |
| {% if axis in ['x', 'y', 'z'] %} | |
| {% if kinematics == 'corexy' %} | |
| {% if axis in ['x', 'y'] %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% endif %} | |
| {% set steppers = ['stepper_x', 'stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% elif kinematics == 'cartesian' %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% set steppers = ['stepper_x'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% set steppers = ['stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Script does not support your kinematics')} | |
| {% endif %} | |
| {% if axes[0] == 'z' %} | |
| {% set minAX = (settings['stepper_' + axes[0]].position_min|float, 0)|max + inset %} | |
| {% set acceleration = settings.printer.max_z_accel|int %} | |
| {% set trv_speed = config.printer.max_z_velocity|int / 2 * 60 %} | |
| {% else %} | |
| {% set minAX = settings['stepper_' + axes[0]].position_min|float + inset %} | |
| {% set acceleration = config.printer.max_accel|int %} | |
| {% set trv_speed = config.printer.max_velocity|int / 2 * 60 %} | |
| {% endif %} | |
| {% set maxAX = settings['stepper_' + axes[0]].position_max|float - inset %} | |
| {% set midAX = settings['stepper_' + axes[0]].position_min|float + | |
| ((settings['stepper_' + axes[0]].position_max|float - | |
| settings['stepper_' + axes[0]].position_min|float) / 2) %} | |
| {% set midBAX = settings['stepper_' + axes[1]].position_min|float + | |
| ((settings['stepper_' + axes[1]].position_max|float - | |
| settings['stepper_' + axes[1]].position_min|float) / 2) %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Incorrect direction')} | |
| {% endif %} | |
| {% if tpfd_min != -1 or tpfd_max != -1 %} | |
| {% if driver == '5160' or driver == '2240' %} | |
| {% if tpfd_min < 0 or tpfd_max < 0 %} | |
| {action_raise_error('WARNING!!! Incorrect TPFD values')} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! TMC%s not support register TPFD' % (driver))} | |
| {% endif %} | |
| {% endif %} | |
| {% for register in printer['gcode_macro _chop_apply_regs'].registers %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={register|string|lower} VALUE=-1 | |
| {% endfor %} | |
| {% for mot in range(8) %} | |
| {% if ('stepper_' + axes[0] + mot|string) in config %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE=amount VALUE={mot} | |
| {% if ('stepper_' + axes[0] + (mot + 1)|string) not in config %} | |
| {action_respond_info('Selected %dwd configuration' % (mot + 1))} | |
| {% endif %} | |
| {% elif mot == 1 %} | |
| {action_respond_info('Selected 1wd configuration')} | |
| {% endif %} | |
| {% endfor %} | |
| {% if accel_chip == 'default' %} | |
| {% if 'accel_chip' in config.resonance_tester %} | |
| {% set accel_chip = config.resonance_tester.accel_chip %} | |
| {% else %} | |
| {% set accel_chip = 'adxl345' %} | |
| {% endif %} | |
| {% endif %} | |
| {action_respond_info('Selected %s for accelerometer' % (accel_chip))} | |
| {% if current_min == 'default' %} | |
| {% set current_min = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_min' % (current_min))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_min = current_min|int %} | |
| {% endif %} | |
| {% if current_max == 'default' %} | |
| {% set current_max = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int%} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_max' % (current_max))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_max = current_max|int %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set current_max = current_min %} | |
| {% set tbl_min = settings['tmc' + driver + ' ' + steppers[0]].driver_tbl|int %} | |
| {% set tbl_max = tbl_min %} | |
| {% set toff_min = settings['tmc' + driver + ' ' + steppers[0]].driver_toff|int %} | |
| {% set toff_max = toff_min %} | |
| {% set hstrt_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hstrt|int %} | |
| {% set hstrt_max = hstrt_min %} | |
| {% set hend_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hend|int %} | |
| {% set hend_max = hend_min %} | |
| {% set rotation_dist = config[steppers[0]].rotation_distance|float %} | |
| {% set gear_ratio = (config[steppers[0]].gear_ratio|default('1:1')).split(':') %} | |
| {% set full_steps_per_rotation = config[steppers[0]].full_steps_per_rotation|default(200)|int %} | |
| {% if min_speed == 'default' %} | |
| {% set min_speed = (required_rpm[0] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|float %} | |
| {% else %} | |
| {% set min_speed = min_speed|float %} | |
| {% endif %} | |
| {% if max_speed == 'default' %} | |
| {% set max_required_mms = (required_rpm[1] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|int %} | |
| {% set max_speed = (((-acceleration * measure_time + ((acceleration * measure_time) ** 2 + | |
| 4 * acceleration * (maxAX - minAX)) ** 0.5) / 2), max_required_mms)|min|float %} | |
| {% else %} | |
| {% set max_speed = max_speed|float %} | |
| {% endif %} | |
| {% if speed_change_step == 'default' %} | |
| {% set speed_change_step = required_rpm[2] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist %} | |
| {% else %} | |
| {% set speed_change_step = speed_change_step|float %} | |
| {% endif %} | |
| {% else %} | |
| {% if min_speed == 'default' or max_speed == 'default' %} | |
| {action_raise_error('WARNING!!! Resonance speed must be defined')} | |
| {% endif %} | |
| {% set min_speed, max_speed = min_speed|float, max_speed|float %} | |
| {% set speed_change_step = 1 %} | |
| {% endif %} | |
| {% if max_speed > trv_speed / 30 %} | |
| {action_raise_error('WARNING!!! Required speed (%d mm/s) on axis (%s)' | |
| ' is faster than kinematics allow, please lower speed or increase' | |
| ' speed limit in printer.cfg' % (max_speed, axes[0]))} | |
| {% endif %} | |
| {% set accel_decel_distance = max_speed ** 2 / acceleration %} | |
| {% set auto_travel_distance = accel_decel_distance + (max_speed * measure_time) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Acceleration & deceleration zone = %f mm' % (accel_decel_distance))} | |
| {action_respond_info('Auto calculated min required travel distance = %f mm' % (auto_travel_distance))} | |
| {% endif %} | |
| {% if travel_distance == 'default' %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Required travel distance on axis (%s)' | |
| ' (%.2f mm) is longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% else %} | |
| {% set travel_distance = travel_distance|int %} | |
| {% if minAX + travel_distance > maxAX %} | |
| {% set travel_distance = maxAX - minAX %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less than' | |
| ' it should be, please increase acceleration or lower speed' % (axes[0]))} | |
| {% else %} | |
| {action_respond_info('WARNING!!! Travel distance on axis (%s)' | |
| ' is longer than kinematics allows, lowering...' % (axes[0]))} | |
| {% endif %} | |
| {% else %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less' | |
| ' than required (%.2f mm), and longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {action_respond_info('Final max travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start find vibration mode, speed: %.2f --> %.2f mm/s with %.2f step current=%d TBL=%d TOFF=%d' | |
| ' HSTRT=%d HEND=%d' % (min_speed, max_speed, speed_change_step, current_min, tbl_min, toff_min, hstrt_min, hend_min))} | |
| {% else %} | |
| {action_respond_info('Final travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start of register enumeration mode, speed: %.2f --> %.2f mm/s current: %d' | |
| ' --> %d mA iterations=%d TBL: %d --> %d TOFF: %d --> %d HSTRT: %d --> %d HEND: %d --> %d TPFD:' | |
| ' %d --> %d' % (min_speed, max_speed, current_min, current_max, iterations, tbl_min, tbl_max, | |
| toff_min, toff_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max))} | |
| {% endif %} | |
| {% if not 'xyz' in printer.toolhead.homed_axes %} | |
| G28 X Y Z | |
| {% endif %} | |
| SET_VELOCITY_LIMIT ACCEL={acceleration} | |
| SET_VELOCITY_LIMIT ACCEL_TO_DECEL={acceleration} | |
| G0 {axes[0]}{minAX} {axes[1]}{midBAX} F{trv_speed} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='cleaner' | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| G4 P5000 | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| {% for current in range(current_min, current_max + 1, current_change_step) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=curr value={current} | |
| {% for tbl in range(tbl_min, tbl_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tbl value={tbl} | |
| {% for toff in range(toff_min, toff_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=toff value={toff} | |
| {% for hstrt_value in range(hstrt_min, hstrt_max + 1) %} | |
| {% for hend_value in range(hend_min, hend_max + 1) %} | |
| {% if hend_value + hstrt_value <= hstrt_hend_max %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hend value={hend_value} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hstrt value={hstrt_value} | |
| {% for tpfd in range(tpfd_min, tpfd_max + 1) %} | |
| {% if tpfd_min != -1 and tpfd_max != -1 %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tpfd value={tpfd} | |
| {% endif %} | |
| DUMP_TMC STEPPER={steppers[0]} REGISTER=chopconf | |
| {% for speed in range((min_speed * 100)|int, (max_speed * 100)|int + 1, (speed_change_step * 100)|int) %} | |
| {% set speed = speed / 100 %} | |
| {% for i in range(iterations) %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set travel_distance = (travel_distance / max_speed) * speed %} | |
| G4 P{delay} | |
| M118 Speed {speed|round(2)} mm/s on {travel_distance|round(2)} mm | |
| {% endif %} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX + travel_distance} F{speed*60} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX} F{trv_speed} | |
| M400 | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% if tpfd_min == -1 or tpfd_max == -1 %} | |
| {% set tpfd_min, tpfd_max = 0, 0 %} | |
| {% endif %} | |
| G4 P500 | |
| G0 {axis}{midAX} F{trv_speed} | |
| {% if run_plotter == 'true' or run_plotter == '1' %} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d hstrt_max=%d' | |
| ' hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| M118 For run parser manually type - RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d' | |
| ' hstrt_max=%d hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| {% endif %} | |
| [virtual_sdcard] | |
| path = ~/printer_data/gcodes | |
| on_error_gcode = CANCEL_PRINT | |
| [pause_resume] | |
| [display_status] | |
| [gcode_macro CANCEL_PRINT] | |
| description = Cancel the actual running print | |
| rename_existing = BASE_CANCEL_PRINT | |
| gcode = | |
| TURN_OFF_HEATERS | |
| CLEAR_PAUSE | |
| SDCARD_RESET_FILE | |
| BASE_CANCEL_PRINT | |
| G90 | |
| G0 X350 Y350 F3600 | |
| SET_SKEW CLEAR=1 | |
| [gcode_macro PAUSE] | |
| description = Pause the actual running print | |
| rename_existing = PAUSE_BASE | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set idle_timeout = client.idle_timeout|default(0) %} | |
| {% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %} | |
| {% set restore = False if printer.toolhead.extruder == '' | |
| else True if params.RESTORE|default(1)|int == 1 else False %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}" | |
| {% if idle_timeout > 0 %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout} | |
| SET_IDLE_TIMEOUT TIMEOUT={idle_timeout} | |
| {% endif %} | |
| PAUSE_BASE | |
| {client.user_pause_macro|default("")} | |
| _TOOLHEAD_PARK_PAUSE_CANCEL {rawparams} | |
| [gcode_macro RESUME] | |
| description = Resume the actual running print | |
| rename_existing = RESUME_BASE | |
| variable_last_extruder_temp = {'restore': False, 'temp': 0} | |
| variable_restore_idle_timeout = 0 | |
| variable_idle_state = False | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set sp_move = client.speed_move|default(velocity) %} | |
| {% set runout_resume = True if client.runout_sensor|default("") == "" | |
| else True if not printer[client.runout_sensor].enabled | |
| else printer[client.runout_sensor].filament_detected %} | |
| {% set can_extrude = True if printer.toolhead.extruder == '' | |
| else printer[printer.toolhead.extruder].can_extrude %} | |
| {% set do_resume = False %} | |
| {% set prompt_txt = [] %} | |
| {% if printer.idle_timeout.state|upper == "IDLE" or idle_state %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False | |
| {% if last_extruder_temp.restore %} | |
| RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }' | |
| M109 S{last_extruder_temp.temp} | |
| {% set do_resume = True %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% if runout_resume %} | |
| {% if do_resume %} | |
| {% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} | |
| {client.user_resume_macro|default("")} | |
| _CLIENT_EXTRUDE | |
| RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}' | |
| {% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %} | |
| {% endif %} | |
| {% if not (runout_resume and do_resume) %} | |
| RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!" | |
| {% for element in prompt_txt %} | |
| RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}' | |
| {% endfor %} | |
| RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info" | |
| RESPOND TYPE=command MSG="action:prompt_show" | |
| {% endif %} | |
| [gcode_macro SET_PAUSE_NEXT_LAYER] | |
| description = Enable a pause if the next layer is reached | |
| gcode = | |
| {% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %} | |
| {% set ENABLE = params.ENABLE|default(1)|int != 0 %} | |
| {% set MACRO = params.MACRO|default(pause_next_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}" | |
| [gcode_macro SET_PAUSE_AT_LAYER] | |
| description = Enable/disable a pause if a given layer number is reached | |
| gcode = | |
| {% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %} | |
| {% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined | |
| else params.LAYER is defined %} | |
| {% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %} | |
| {% set MACRO = params.MACRO|default(pause_at_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}" | |
| [gcode_macro SET_PRINT_STATS_INFO] | |
| rename_existing = SET_PRINT_STATS_INFO_BASE | |
| description = Overwrite, to get pause_next_layer and pause_at_layer feature | |
| variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" } | |
| variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" } | |
| gcode = | |
| {% if pause_next_layer.enable %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}' | |
| {pause_next_layer.call} | |
| SET_PAUSE_NEXT_LAYER ENABLE=0 | |
| {% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}' | |
| {pause_at_layer.call} | |
| SET_PAUSE_AT_LAYER ENABLE=0 | |
| {% endif %} | |
| SET_PRINT_STATS_INFO_BASE {rawparams} | |
| [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL] | |
| description = Helper: park toolhead used in PAUSE and CANCEL_PRINT | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %} | |
| {% set custom_park_x = client.custom_park_x|default(0.0) %} | |
| {% set custom_park_y = client.custom_park_y|default(0.0) %} | |
| {% set park_dz = client.custom_park_dz|default(2.0)|abs %} | |
| {% set sp_hop = client.speed_hop|default(15) * 60 %} | |
| {% set sp_move = client.speed_move|default(velocity) * 60 %} | |
| {% set origin = printer.gcode_move.homing_origin %} | |
| {% set act = printer.gcode_move.gcode_position %} | |
| {% set max = printer.toolhead.axis_maximum %} | |
| {% set cone = printer.toolhead.cone_start_z|default(max.z) %} | |
| {% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch'] | |
| else False %} | |
| {% set z_min = params.Z_MIN|default(0)|float %} | |
| {% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %} | |
| {% set x_park = params.X if params.X is defined | |
| else custom_park_x if use_custom | |
| else 0.0 if round_bed | |
| else (max.x - 5.0) %} | |
| {% set y_park = params.Y if params.Y is defined | |
| else custom_park_y if use_custom | |
| else (max.y - 5.0) if round_bed and z_park < cone | |
| else 0.0 if round_bed | |
| else (max.y - 5.0) %} | |
| _CLIENT_RETRACT | |
| {% if "xyz" in printer.toolhead.homed_axes %} | |
| G90 | |
| G1 Z{z_park} F{sp_hop} | |
| G1 X{x_park} Y{y_park} F{sp_move} | |
| {% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='Printer not homed' | |
| {% endif %} | |
| [gcode_macro _CLIENT_EXTRUDE] | |
| description = Extrudes, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %} | |
| {% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_unretract)|default(35) %} | |
| {% set absolute_extrude = printer.gcode_move.absolute_extrude %} | |
| {% if printer.toolhead.extruder != '' %} | |
| {% if printer[printer.toolhead.extruder].can_extrude %} | |
| {% if use_fw_retract %} | |
| {% if length < 0 %} | |
| G10 | |
| {% else %} | |
| G11 | |
| {% endif %} | |
| {% else %} | |
| M83 | |
| G1 E{length} F{(speed|float|abs) * 60} | |
| {% if absolute_extrude %} | |
| M82 | |
| {% endif %} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}' | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _CLIENT_RETRACT] | |
| description = Retracts, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set length = params.LENGTH|default(client.retract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_retract)|default(35) %} | |
| _CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs} | |
| [autotune_tmc stepper_x] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc stepper_y] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc extruder] | |
| motor = moons-cse14hra1l410a | |
| tuning_goal = performance | |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing = _BED_MESH_CALIBRATE | |
| gcode = | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} | |
| {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} | |
| {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} | |
| {% set attach_macro = kamp_settings.attach_macro | string %} | |
| {% set detach_macro = kamp_settings.detach_macro | string %} | |
| {% set mesh_margin = kamp_settings.mesh_margin | float %} | |
| {% set fuzz_amount = kamp_settings.fuzz_amount | float %} | |
| {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} | |
| {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} | |
| {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %} | |
| {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %} | |
| {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} | |
| {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} | |
| {% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} | |
| {% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} | |
| {% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %} | |
| {% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %} | |
| {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %} | |
| {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %} | |
| {% if (([points_x, points_y]|max) > 6) %} | |
| {% set algorithm = "bicubic" %} | |
| {% set min_points = 4 %} | |
| {% else %} | |
| {% set algorithm = "lagrange" %} | |
| {% set min_points = 3 %} | |
| {% endif %} | |
| {% set points_x = [points_x , min_points]|max %} | |
| {% set points_y = [points_y , min_points]|max %} | |
| {% set points_x = [points_x , probe_count[0]]|min %} | |
| {% set points_y = [points_y , probe_count[1]]|min %} | |
| {% if verbose_enable == True %} | |
| {% if printer.exclude_object.objects != [] %} | |
| { action_respond_info( "Algorithm: {}.".format( | |
| (algorithm), | |
| )) } | |
| { action_respond_info("Default probe count: {},{}.".format( | |
| (probe_count[0]), | |
| (probe_count[1]), | |
| )) } | |
| { action_respond_info("Adapted probe count: {},{}.".format( | |
| (points_x), | |
| (points_y), | |
| )) } | |
| {action_respond_info("Default mesh bounds: {}, {}.".format( | |
| (bed_mesh_min[0],bed_mesh_min[1]), | |
| (bed_mesh_max[0],bed_mesh_max[1]), | |
| )) } | |
| {% if mesh_margin > 0 %} | |
| {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format( | |
| (mesh_margin), | |
| (mesh_margin), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Mesh margin is 0, margin not increased.")} | |
| {% endif %} | |
| {% if fuzz_amount > 0 %} | |
| {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format( | |
| (fuzz_amount), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")} | |
| {% endif %} | |
| { action_respond_info("Adapted mesh bounds: {}, {}.".format( | |
| (adapted_x_min, adapted_y_min), | |
| (adapted_x_max, adapted_y_max), | |
| )) } | |
| {action_respond_info("KAMP adjustments successful. Happy KAMPing!")} | |
| {% else %} | |
| {action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")} | |
| G4 P5000 | |
| {% endif %} | |
| {% endif %} | |
| {% if probe_dock_enable == True %} | |
| {attach_macro} | |
| {% endif %} | |
| _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y} | |
| {% if probe_dock_enable == True %} | |
| {detach_macro} | |
| {% endif %} | |
| [gcode_macro LINE_PURGE] | |
| description = A purge macro that adapts to be near your actual printed objects | |
| gcode = | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %} | |
| {% if printer.firmware_retraction is defined %} | |
| {% set RETRACT = G10 | string %} | |
| {% set UNRETRACT = G11 | string %} | |
| {% else %} | |
| {% set RETRACT = 'G1 E-.5 F2100' | string %} | |
| {% set UNRETRACT = 'G1 E.5 F2100' | string %} | |
| {% endif %} | |
| {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %} | |
| {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %} | |
| {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %} | |
| {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %} | |
| {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %} | |
| {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} | |
| {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} | |
| {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} | |
| {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} | |
| {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} | |
| {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} | |
| {% set purge_move_speed = (flow_rate / 5.0) * 60 | float %} | |
| {% if cross_section < 5 %} | |
| {action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")} | |
| {% else %} | |
| {% if verbose_enable == True %} | |
| {action_respond_info("Moving filament tip {}mms".format( | |
| (tip_distance), | |
| )) } | |
| {% endif %} | |
| {% if printer.firmware_retraction is defined %} | |
| {action_respond_info("KAMP purge is using firmware retraction.")} | |
| {% else %} | |
| {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")} | |
| {% endif %} | |
| {% if purge_y_origin > 0 %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_center), | |
| (purge_y_origin), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% else %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_origin), | |
| (purge_y_center), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Prepurge_State | |
| {% if purge_y_origin > 0 %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_center} Y{purge_y_origin} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 X{purge_x_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% else %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_origin} Y{purge_y_center} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 Y{purge_y_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% endif %} | |
| RESTORE_GCODE_STATE NAME=Prepurge_State | |
| {% endif %} | |
| [gcode_macro SMART_PARK] | |
| description = Parks your printhead near the print area for pre-print hotend heating. | |
| gcode = | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set z_height = kamp_settings.smart_park_height | float %} | |
| {% set purge_margin = kamp_settings.purge_margin | float %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} | |
| {% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} | |
| {% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %} | |
| {% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(center_x) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(center_y) %} | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% if purge_margin > 0 and x_min != center_x and y_min != center_y %} | |
| {% set x_min = [ x_min - purge_margin , x_min ] | min %} | |
| {% set y_min = [ y_min - purge_margin , y_min ] | min %} | |
| {% set x_min = [ x_min , axis_minimum_x ] | max %} | |
| {% set y_min = [ y_min , axis_minimum_y ] | max %} | |
| {% endif %} | |
| {% if verbose_enable == True %} | |
| { action_respond_info("Smart Park location: {},{}.".format( | |
| (x_min), | |
| (y_min), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Presmartpark_State | |
| G90 | |
| {% if printer.toolhead.position.z < z_height %} | |
| G0 Z{z_height} | |
| {% endif %} | |
| G0 X{x_min} Y{y_min} F{travel_speed} | |
| G0 Z{z_height} | |
| RESTORE_GCODE_STATE NAME=Presmartpark_State | |
| [gcode_macro _KAMP_Settings] | |
| description = This macro contains all adjustable settings for KAMP | |
| variable_verbose_enable = True | |
| variable_mesh_margin = 5 | |
| variable_fuzz_amount = 1 | |
| variable_probe_dock_enable = False | |
| variable_attach_macro = 'Attach_Probe' | |
| variable_detach_macro = 'Dock_Probe' | |
| variable_purge_height = 0.8 | |
| variable_tip_distance = 0 | |
| variable_purge_margin = 10 | |
| variable_purge_amount = 30 | |
| variable_flow_rate = 12 | |
| variable_smart_park_height = 10 | |
| gcode = | |
| {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")} | |
| [gcode_macro _TAP_VARIABLES] | |
| variable_probing = 0 | |
| variable_brushed = 0 | |
| gcode = | |
| [homing_override] | |
| axes = xyz | |
| gcode = | |
| {% if 'x' not in printer.toolhead.homed_axes %} | |
| G28 X | |
| {% endif %} | |
| {% if 'y' not in printer.toolhead.homed_axes %} | |
| G28 Y | |
| {% endif %} | |
| {% if 'z' not in printer.toolhead.homed_axes %} | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% endif %} | |
| [gcode_macro _PRE_PROBE_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| {% set BRUSHED = printer["gcode_macro _TAP_VARIABLES"].brushed %} | |
| {% if BRUSHED == 1 %} | |
| _PROBE_TEMP_CHECK | |
| {% else %} | |
| NOZZLE_BRUSH | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=1 | |
| _PROBE_TEMP_CHECK | |
| {% endif %} | |
| [gcode_macro _PROBE_TEMP_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| SET_KINEMATICS_LIMIT Z_ACCEL={PROBE_ACCEL} | |
| {% if TARGET_TEMP > PROBE_TEMP %} | |
| { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) } | |
| M109 S{PROBE_TEMP} | |
| {% else %} | |
| {% if ACTUAL_TEMP > MAX_TEMP %} | |
| { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) } | |
| TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={MAX_TEMP} | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _POST_PROBING] | |
| gcode = | |
| SET_KINEMATICS_LIMIT Z_ACCEL={printer["gcode_macro _TAP_SETTINGS"].max_z_accel} | |
| [gcode_macro _POST_PROBE] | |
| gcode = | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro SET_PROBE_TEMP] | |
| gcode = | |
| {% set temp = params.TEMP|int %} | |
| SAVE_VARIABLE VARIABLE=probe_temp VALUE={TEMP} | |
| [gcode_macro Z_TILT_ADJUST] | |
| rename_existing = Z_TILT_ADJUST_REAL | |
| gcode = | |
| Z_TILT_ADJUST_REAL | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro _TAP_SETTINGS] | |
| variable_probe_accel = 15 | |
| variable_home_x = 175 | |
| variable_home_y = 175 | |
| variable_home_speed = 300 | |
| variable_max_z_accel = 500 | |
| gcode = | |
| [mcu] | |
| serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_JKYZ-if00 | |
| [danger_options] | |
| allow_plugin_override = True | |
| [printer] | |
| square_corner_velocity = 5.0 | |
| kinematics = limited_corexy | |
| max_velocity = 564 | |
| max_z_velocity = 100 | |
| max_accel = 10000 | |
| max_x_accel = 9000 | |
| max_y_accel = 8000 | |
| max_z_accel = 500 | |
| scale_xy_accel = True | |
| [thermistor NTC10K] | |
| temperature1 = 0.0 | |
| resistance1 = 32116.0 | |
| temperature2 = 40.0 | |
| resistance2 = 5309.0 | |
| temperature3 = 80.0 | |
| resistance3 = 1228.0 | |
| [stepper_x] | |
| step_pin = PE11 | |
| dir_pin = !PE10 | |
| enable_pin = !PE9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB14 | |
| position_min = 0 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| step_pulse_duration = 0.000004 | |
| [tmc2209 stepper_x] | |
| uart_pin = PE7 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_y] | |
| step_pin = PD8 | |
| dir_pin = PB12 | |
| enable_pin = !PD9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB13 | |
| position_min = 0 | |
| step_pulse_duration = 0.000004 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| [tmc2209 stepper_y] | |
| uart_pin = PE15 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_z] | |
| step_pin = PE2 | |
| dir_pin = PE4 | |
| enable_pin = !PE3 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| endstop_pin = probe:z_virtual_endstop | |
| position_max = 290 | |
| position_min = -5 | |
| homing_speed = 50 | |
| second_homing_speed = 10 | |
| homing_retract_dist = 3 | |
| [tmc2209 stepper_z] | |
| uart_pin = PC14 | |
| uart_address = 0 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z1] | |
| step_pin = PE6 | |
| dir_pin = PC13 | |
| enable_pin = !PE5 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z1] | |
| uart_pin = PA15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z2] | |
| step_pin = PD12 | |
| dir_pin = PC4 | |
| enable_pin = !PE8 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z2] | |
| uart_pin = PC15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [extruder] | |
| step_pin = PD5 | |
| dir_pin = !PD6 | |
| enable_pin = !PD4 | |
| rotation_distance = 21.525 | |
| gear_ratio = 50:10 | |
| microsteps = 16 | |
| full_steps_per_rotation = 200 | |
| nozzle_diameter = 0.600 | |
| filament_diameter = 1.75 | |
| heater_pin = PB15 | |
| sensor_type = PT1000 | |
| sensor_pin = PC0 | |
| min_temp = 10 | |
| max_temp = 315 | |
| max_power = 1.0 | |
| min_extrude_temp = 170 | |
| heater_power = 115 | |
| cooling_fan = fan | |
| ambient_temp_sensor = heater_generic chamber_heater | |
| pressure_advance = 0.05 | |
| pressure_advance_smooth_time = 0.040 | |
| max_extrude_cross_section = 5 | |
| pid_version = 1 | |
| pid_target = 285.00 | |
| pid_tolerance = 0.0200 | |
| pid_kp = 18.086 | |
| pid_ki = 0.536 | |
| pid_kd = 152.599 | |
| control = mpc | |
| block_heat_capacity = 35.4770 | |
| sensor_responsiveness = 0.0640446 | |
| ambient_transfer = 0.188931 | |
| fan_ambient_transfer = 0.188931, 0.232912, 0.268052 | |
| [tmc2209 extruder] | |
| uart_pin = PD7 | |
| interpolate = true | |
| run_current = 0.65 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| [verify_heater extruder] | |
| hysteresis = 15 | |
| heating_gain = 0.5 | |
| check_gain_time = 120 | |
| [heater_bed] | |
| heater_pin = PB4 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PB0 | |
| max_power = 0.8 | |
| min_temp = 5 | |
| max_temp = 170 | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [probe] | |
| pin = !PA3 | |
| x_offset = 0 | |
| y_offset = 0 | |
| speed = 50.0 | |
| samples = 4 | |
| samples_result = median | |
| sample_retract_dist = 3.0 | |
| samples_tolerance = 0.05 | |
| samples_tolerance_retries = 5 | |
| deactivate_on_each_sample = True | |
| activate_gcode = | |
| _PRE_PROBE_CHECK | |
| deactivate_gcode = | |
| _POST_PROBING | |
| z_offset = -1.160 | |
| [heater_fan hotend_fan] | |
| pin = PA13 | |
| max_power = 1.0 | |
| kick_start_time = 0.5 | |
| heater = extruder | |
| heater_temp = 50.0 | |
| fan_speed = 1.0 | |
| [fan] | |
| pin = PA14 | |
| max_power = 0.4 | |
| kick_start_time = 0.5 | |
| off_below = 0.10 | |
| [neopixel my_neopixel] | |
| pin = PD3 | |
| chain_count = 26 | |
| color_order = GRBW | |
| initial_red = 0.2 | |
| initial_green = 0.2 | |
| initial_blue = 0.2 | |
| [idle_timeout] | |
| timeout = 9999999999 | |
| [bed_mesh] | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| mesh_min = 40, 40 | |
| mesh_max = 310,310 | |
| fade_start = 0.6 | |
| fade_end = 10.0 | |
| probe_count = 7,7 | |
| algorithm = bicubic | |
| adaptive_margin = 5 | |
| [z_tilt] | |
| z_positions = | |
| -50, 18 | |
| 150, 348 | |
| 350, 18 | |
| points = | |
| 30, 5 | |
| 175, 295 | |
| 320, 5 | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| retries = 10 | |
| retry_tolerance = 0.007 | |
| [gcode_macro G32] | |
| gcode = | |
| BED_MESH_CLEAR | |
| G28 | |
| Z_TILT_ADJUST | |
| G28 | |
| G0 X175 Y175 Z30 F3600 | |
| [save_variables] | |
| filename = ~/printer_data/config/variables.cfg | |
| [gcode_macro PRINT_START] | |
| gcode = | |
| {% set chamber = printer.extruder.filament.chamber %} | |
| G28 | |
| HEAT_BED_AND_WAIT | |
| SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="z_thermal_adjust" MINIMUM={printer.extruder.filament.chamber + 2} | |
| G28 Z | |
| BED_MESH_CALIBRATE | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| G92 E0 | |
| G90 | |
| HEAT_EXTRUDER_AND_WAIT | |
| LINE_PURGE | |
| [gcode_macro PRINT_END] | |
| gcode = | |
| M400 | |
| G92 E0 | |
| G1 E-1.0 F3600 | |
| G91 | |
| G0 Z1.00 X20.0 Y20.0 F20000 | |
| TURN_OFF_HEATERS | |
| M107 | |
| G90 | |
| G0 X350 Y350 F3600 | |
| [exclude_object] | |
| [gcode_arcs] | |
| resolution = 0.1 | |
| [input_shaper] | |
| enabled_extruders = extruder | |
| smoother_freq_x = 56.6 | |
| shaper_type_x = smooth_ei | |
| smoother_freq_y = 30.8 | |
| shaper_type_y = smooth_ei | |
| [filaments] | |
| on_set_filament_gcode = | |
| M117 add | |
| on_clear_filament_gcode = | |
| M117 clear | |
| [z_thermal_adjust] | |
| temp_coeff = 0.005 | |
| smooth_time = 1 | |
| sensor_type = NTC10K | |
| sensor_pin = PC2 | |
| min_temp = 10 | |
| max_temp = 67 | |
| gcode_id = thermal_adjust | |
| [heater_generic chamber_heater] | |
| heater_pin = PC8 | |
| max_power = 1.0 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PC3 | |
| min_temp = 10 | |
| max_temp = 67 | |
| pid_version = 1 | |
| pid_target = 60.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 64.228 | |
| pid_ki = 0.421 | |
| pid_kd = 2450.039 | |
| [heater_fan chamber_heater_fan] | |
| pin = PB2 | |
| max_power = 1.0 | |
| heater = chamber_heater | |
| heater_temp = 35 | |
| [verify_heater chamber_heater] | |
| hysteresis = 5 | |
| heating_gain = 0.1 | |
| check_gain_time = 480 | |
| [skew_correction] | |
| [pid_profile extruder abs] | |
| pid_version = 1 | |
| pid_target = 260.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 16.100 | |
| pid_ki = 1.058 | |
| pid_kd = 61.259 | |
| [pid_profile heater_bed abs] | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [skew_correction skew] | |
| xy_skew = 0.000 | |
| xz_skew = 0.000 | |
| yz_skew = 0.000 | |
| [pid_profile extruder pc] | |
| pid_version = 1 | |
| pid_target = 250.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 17.627 | |
| pid_ki = 1.013 | |
| pid_kd = 76.678 | |
| [bed_mesh default] | |
| version = 1 | |
| points = | |
| -0.404688, -0.225625, -0.205000, -0.161875 | |
| -0.151250, -0.037188, 0.016562, 0.080312 | |
| 0.073437, 0.069375, 0.125312, 0.193437 | |
| 0.220312, 0.119687, 0.199375, 0.301250 | |
| x_count = 4 | |
| y_count = 4 | |
| mesh_x_pps = 2 | |
| mesh_y_pps = 2 | |
| algo = lagrange | |
| tension = 0.2 | |
| min_x = 109.99 | |
| max_x = 240.52 | |
| min_y = 119.39 | |
| max_y = 230.69 | |
| ======================= | |
| DEBUG: registering extruder | |
| Write g-code response | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 593, in _respond_raw | |
| os.write(self.fd, (msg + "\n").encode()) | |
| BlockingIOError: [Errno 11] Resource temporarily unavailable | |
| DEBUG: registering extruder#: extruder | |
| Extruder max_extrude_ratio=2.078758 | |
| mcu 'mcu': Starting serial connect | |
| webhooks client 547625820048: New connection | |
| webhooks client 547625820048: Client info {'program': 'Moonraker', 'version': 'v0.8.0-354-gba94285'} | |
| Loaded MCU 'mcu' 105 commands ( v0.10.0-557-gf7e29b27 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-12+11) 2.31.1) | |
| MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1 | |
| Sending MCU 'mcu' printer configuration... | |
| Configured MCU 'mcu' (1024 moves) | |
| Starting heater checks for extruder | |
| Starting heater checks for heater_bed | |
| bed_mesh: generated points | |
| Index | Tool Adjusted | Probe | |
| 0 | (40.0, 40.0) | (40.0, 40.0) | |
| 1 | (85.0, 40.0) | (85.0, 40.0) | |
| 2 | (130.0, 40.0) | (130.0, 40.0) | |
| 3 | (175.0, 40.0) | (175.0, 40.0) | |
| 4 | (220.0, 40.0) | (220.0, 40.0) | |
| 5 | (265.0, 40.0) | (265.0, 40.0) | |
| 6 | (310.0, 40.0) | (310.0, 40.0) | |
| 7 | (310.0, 85.0) | (310.0, 85.0) | |
| 8 | (265.0, 85.0) | (265.0, 85.0) | |
| 9 | (220.0, 85.0) | (220.0, 85.0) | |
| 10 | (175.0, 85.0) | (175.0, 85.0) | |
| 11 | (130.0, 85.0) | (130.0, 85.0) | |
| 12 | (85.0, 85.0) | (85.0, 85.0) | |
| 13 | (40.0, 85.0) | (40.0, 85.0) | |
| 14 | (40.0, 130.0) | (40.0, 130.0) | |
| 15 | (85.0, 130.0) | (85.0, 130.0) | |
| 16 | (130.0, 130.0) | (130.0, 130.0) | |
| 17 | (175.0, 130.0) | (175.0, 130.0) | |
| 18 | (220.0, 130.0) | (220.0, 130.0) | |
| 19 | (265.0, 130.0) | (265.0, 130.0) | |
| 20 | (310.0, 130.0) | (310.0, 130.0) | |
| 21 | (310.0, 175.0) | (310.0, 175.0) | |
| 22 | (265.0, 175.0) | (265.0, 175.0) | |
| 23 | (220.0, 175.0) | (220.0, 175.0) | |
| 24 | (175.0, 175.0) | (175.0, 17 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment