Created
August 6, 2024 11:29
-
-
Save Nathan22211/ff7987b904a5c886a850f34e09ddab45 to your computer and use it in GitHub Desktop.
This file has been truncated, but you can view the full file.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ===== Config file ===== | |
| [respond] | |
| [gcode_macro CHOPPER_TUNE] | |
| description = Vibrations tests to calculate lowest magnitude drivers registers v1.2 | |
| variable_debug = False | |
| variable_inset = 10 | |
| variable_current_change_step = 25 | |
| variable_measure_time = 1250 | |
| variable_required_rpm = [37.5, 150, 1.5] | |
| variable_delay = 500 | |
| gcode = | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| _detect_driver stepper={axis} | |
| _chop_workflow axis={axis} {rawparams} | |
| [gcode_shell_command chop_tune] | |
| command = ~/chopper-resonance-tuner/chopper_plot.sh | |
| timeout = 9999.0 | |
| verbose = True | |
| [gcode_macro _detect_driver] | |
| description = Find which driver is used in configuration | |
| variable_drivers = '2130', '2208', '2209', '2660', '2240', '5160' | |
| variable_driver = 0 | |
| variable_resistor = 0 | |
| gcode = | |
| {% set stepper = 'stepper_' + params.STEPPER|string|lower %} | |
| {% for driver in drivers %} | |
| {% if 'run_current' in printer.configfile.config['tmc' + driver + ' ' + stepper] %} | |
| {action_respond_info('Selected tmc%s for %s' % (driver, stepper))} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=driver VALUE={driver} | |
| {% if driver != '2240' %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].sense_resistor %} | |
| {% else %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].rref %} | |
| {% endif %} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=resistor VALUE={resistor} | |
| {% endif %} | |
| {% endfor %} | |
| [gcode_macro _chop_apply_regs] | |
| variable_registers = 'tbl', 'toff', 'hend', 'hstrt', 'tpfd', 'curr' | |
| variable_amount = 0 | |
| variable_tbl = -1 | |
| variable_toff = -1 | |
| variable_hend = -1 | |
| variable_hstrt = -1 | |
| variable_tpfd = -1 | |
| variable_curr = -1 | |
| gcode = | |
| {% if printer['gcode_macro _chop_apply_regs'][params.FIELD]|int != params.VALUE|int %} | |
| {% for stepper in params.STEPPERS.split('-') %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to {params.VALUE|int} on {stepper} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% for count in range(1, amount + 1) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to { | |
| params.VALUE|int} on {stepper|string + count|string} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper|string + count|string} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={params.FIELD|string|lower} VALUE={params.VALUE|int} | |
| {% endif %} | |
| [gcode_macro _chop_workflow] | |
| description = Calculate process of CHOPPER_TUNE macro | |
| gcode = | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set driver = printer['gcode_macro _detect_driver'].driver|string|lower %} | |
| {% set sense_resistor = printer['gcode_macro _detect_driver'].resistor %} | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set current_change_step = printer['gcode_macro CHOPPER_TUNE'].current_change_step %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set required_rpm = printer['gcode_macro CHOPPER_TUNE'].required_rpm %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| {% set inset = printer['gcode_macro CHOPPER_TUNE'].inset %} | |
| {% set config = printer.configfile.config %} | |
| {% set settings = printer.configfile.settings %} | |
| {% set measure_time = printer['gcode_macro CHOPPER_TUNE'].measure_time / 1000|float %} | |
| {% set delay = printer['gcode_macro CHOPPER_TUNE'].delay|int %} | |
| {% set kinematics = config.printer.kinematics|string %} | |
| {% if axis in ['x', 'y', 'z'] %} | |
| {% if kinematics == 'corexy' %} | |
| {% if axis in ['x', 'y'] %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% endif %} | |
| {% set steppers = ['stepper_x', 'stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% elif kinematics == 'cartesian' %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% set steppers = ['stepper_x'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% set steppers = ['stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Script does not support your kinematics')} | |
| {% endif %} | |
| {% if axes[0] == 'z' %} | |
| {% set minAX = (settings['stepper_' + axes[0]].position_min|float, 0)|max + inset %} | |
| {% set acceleration = settings.printer.max_z_accel|int %} | |
| {% set trv_speed = config.printer.max_z_velocity|int / 2 * 60 %} | |
| {% else %} | |
| {% set minAX = settings['stepper_' + axes[0]].position_min|float + inset %} | |
| {% set acceleration = config.printer.max_accel|int %} | |
| {% set trv_speed = config.printer.max_velocity|int / 2 * 60 %} | |
| {% endif %} | |
| {% set maxAX = settings['stepper_' + axes[0]].position_max|float - inset %} | |
| {% set midAX = settings['stepper_' + axes[0]].position_min|float + | |
| ((settings['stepper_' + axes[0]].position_max|float - | |
| settings['stepper_' + axes[0]].position_min|float) / 2) %} | |
| {% set midBAX = settings['stepper_' + axes[1]].position_min|float + | |
| ((settings['stepper_' + axes[1]].position_max|float - | |
| settings['stepper_' + axes[1]].position_min|float) / 2) %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Incorrect direction')} | |
| {% endif %} | |
| {% if tpfd_min != -1 or tpfd_max != -1 %} | |
| {% if driver == '5160' or driver == '2240' %} | |
| {% if tpfd_min < 0 or tpfd_max < 0 %} | |
| {action_raise_error('WARNING!!! Incorrect TPFD values')} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! TMC%s not support register TPFD' % (driver))} | |
| {% endif %} | |
| {% endif %} | |
| {% for register in printer['gcode_macro _chop_apply_regs'].registers %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={register|string|lower} VALUE=-1 | |
| {% endfor %} | |
| {% for mot in range(8) %} | |
| {% if ('stepper_' + axes[0] + mot|string) in config %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE=amount VALUE={mot} | |
| {% if ('stepper_' + axes[0] + (mot + 1)|string) not in config %} | |
| {action_respond_info('Selected %dwd configuration' % (mot + 1))} | |
| {% endif %} | |
| {% elif mot == 1 %} | |
| {action_respond_info('Selected 1wd configuration')} | |
| {% endif %} | |
| {% endfor %} | |
| {% if accel_chip == 'default' %} | |
| {% if 'accel_chip' in config.resonance_tester %} | |
| {% set accel_chip = config.resonance_tester.accel_chip %} | |
| {% else %} | |
| {% set accel_chip = 'adxl345' %} | |
| {% endif %} | |
| {% endif %} | |
| {action_respond_info('Selected %s for accelerometer' % (accel_chip))} | |
| {% if current_min == 'default' %} | |
| {% set current_min = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_min' % (current_min))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_min = current_min|int %} | |
| {% endif %} | |
| {% if current_max == 'default' %} | |
| {% set current_max = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int%} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_max' % (current_max))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_max = current_max|int %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set current_max = current_min %} | |
| {% set tbl_min = settings['tmc' + driver + ' ' + steppers[0]].driver_tbl|int %} | |
| {% set tbl_max = tbl_min %} | |
| {% set toff_min = settings['tmc' + driver + ' ' + steppers[0]].driver_toff|int %} | |
| {% set toff_max = toff_min %} | |
| {% set hstrt_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hstrt|int %} | |
| {% set hstrt_max = hstrt_min %} | |
| {% set hend_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hend|int %} | |
| {% set hend_max = hend_min %} | |
| {% set rotation_dist = config[steppers[0]].rotation_distance|float %} | |
| {% set gear_ratio = (config[steppers[0]].gear_ratio|default('1:1')).split(':') %} | |
| {% set full_steps_per_rotation = config[steppers[0]].full_steps_per_rotation|default(200)|int %} | |
| {% if min_speed == 'default' %} | |
| {% set min_speed = (required_rpm[0] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|float %} | |
| {% else %} | |
| {% set min_speed = min_speed|float %} | |
| {% endif %} | |
| {% if max_speed == 'default' %} | |
| {% set max_required_mms = (required_rpm[1] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|int %} | |
| {% set max_speed = (((-acceleration * measure_time + ((acceleration * measure_time) ** 2 + | |
| 4 * acceleration * (maxAX - minAX)) ** 0.5) / 2), max_required_mms)|min|float %} | |
| {% else %} | |
| {% set max_speed = max_speed|float %} | |
| {% endif %} | |
| {% if speed_change_step == 'default' %} | |
| {% set speed_change_step = required_rpm[2] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist %} | |
| {% else %} | |
| {% set speed_change_step = speed_change_step|float %} | |
| {% endif %} | |
| {% else %} | |
| {% if min_speed == 'default' or max_speed == 'default' %} | |
| {action_raise_error('WARNING!!! Resonance speed must be defined')} | |
| {% endif %} | |
| {% set min_speed, max_speed = min_speed|float, max_speed|float %} | |
| {% set speed_change_step = 1 %} | |
| {% endif %} | |
| {% if max_speed > trv_speed / 30 %} | |
| {action_raise_error('WARNING!!! Required speed (%d mm/s) on axis (%s)' | |
| ' is faster than kinematics allow, please lower speed or increase' | |
| ' speed limit in printer.cfg' % (max_speed, axes[0]))} | |
| {% endif %} | |
| {% set accel_decel_distance = max_speed ** 2 / acceleration %} | |
| {% set auto_travel_distance = accel_decel_distance + (max_speed * measure_time) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Acceleration & deceleration zone = %f mm' % (accel_decel_distance))} | |
| {action_respond_info('Auto calculated min required travel distance = %f mm' % (auto_travel_distance))} | |
| {% endif %} | |
| {% if travel_distance == 'default' %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Required travel distance on axis (%s)' | |
| ' (%.2f mm) is longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% else %} | |
| {% set travel_distance = travel_distance|int %} | |
| {% if minAX + travel_distance > maxAX %} | |
| {% set travel_distance = maxAX - minAX %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less than' | |
| ' it should be, please increase acceleration or lower speed' % (axes[0]))} | |
| {% else %} | |
| {action_respond_info('WARNING!!! Travel distance on axis (%s)' | |
| ' is longer than kinematics allows, lowering...' % (axes[0]))} | |
| {% endif %} | |
| {% else %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less' | |
| ' than required (%.2f mm), and longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {action_respond_info('Final max travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start find vibration mode, speed: %.2f --> %.2f mm/s with %.2f step current=%d TBL=%d TOFF=%d' | |
| ' HSTRT=%d HEND=%d' % (min_speed, max_speed, speed_change_step, current_min, tbl_min, toff_min, hstrt_min, hend_min))} | |
| {% else %} | |
| {action_respond_info('Final travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start of register enumeration mode, speed: %.2f --> %.2f mm/s current: %d' | |
| ' --> %d mA iterations=%d TBL: %d --> %d TOFF: %d --> %d HSTRT: %d --> %d HEND: %d --> %d TPFD:' | |
| ' %d --> %d' % (min_speed, max_speed, current_min, current_max, iterations, tbl_min, tbl_max, | |
| toff_min, toff_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max))} | |
| {% endif %} | |
| {% if not 'xyz' in printer.toolhead.homed_axes %} | |
| G28 X Y Z | |
| {% endif %} | |
| SET_VELOCITY_LIMIT ACCEL={acceleration} | |
| SET_VELOCITY_LIMIT ACCEL_TO_DECEL={acceleration} | |
| G0 {axes[0]}{minAX} {axes[1]}{midBAX} F{trv_speed} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='cleaner' | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| G4 P5000 | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| {% for current in range(current_min, current_max + 1, current_change_step) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=curr value={current} | |
| {% for tbl in range(tbl_min, tbl_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tbl value={tbl} | |
| {% for toff in range(toff_min, toff_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=toff value={toff} | |
| {% for hstrt_value in range(hstrt_min, hstrt_max + 1) %} | |
| {% for hend_value in range(hend_min, hend_max + 1) %} | |
| {% if hend_value + hstrt_value <= hstrt_hend_max %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hend value={hend_value} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hstrt value={hstrt_value} | |
| {% for tpfd in range(tpfd_min, tpfd_max + 1) %} | |
| {% if tpfd_min != -1 and tpfd_max != -1 %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tpfd value={tpfd} | |
| {% endif %} | |
| DUMP_TMC STEPPER={steppers[0]} REGISTER=chopconf | |
| {% for speed in range((min_speed * 100)|int, (max_speed * 100)|int + 1, (speed_change_step * 100)|int) %} | |
| {% set speed = speed / 100 %} | |
| {% for i in range(iterations) %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set travel_distance = (travel_distance / max_speed) * speed %} | |
| G4 P{delay} | |
| M118 Speed {speed|round(2)} mm/s on {travel_distance|round(2)} mm | |
| {% endif %} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX + travel_distance} F{speed*60} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX} F{trv_speed} | |
| M400 | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% if tpfd_min == -1 or tpfd_max == -1 %} | |
| {% set tpfd_min, tpfd_max = 0, 0 %} | |
| {% endif %} | |
| G4 P500 | |
| G0 {axis}{midAX} F{trv_speed} | |
| {% if run_plotter == 'true' or run_plotter == '1' %} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d hstrt_max=%d' | |
| ' hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| M118 For run parser manually type - RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d' | |
| ' hstrt_max=%d hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| {% endif %} | |
| [virtual_sdcard] | |
| path = ~/printer_data/gcodes | |
| on_error_gcode = CANCEL_PRINT | |
| [pause_resume] | |
| [display_status] | |
| [gcode_macro CANCEL_PRINT] | |
| description = Cancel the actual running print | |
| rename_existing = BASE_CANCEL_PRINT | |
| gcode = | |
| TURN_OFF_HEATERS | |
| CLEAR_PAUSE | |
| SDCARD_RESET_FILE | |
| BASE_CANCEL_PRINT | |
| G90 | |
| G0 X350 Y350 F3600 | |
| SET_SKEW CLEAR=1 | |
| [gcode_macro PAUSE] | |
| description = Pause the actual running print | |
| rename_existing = PAUSE_BASE | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set idle_timeout = client.idle_timeout|default(0) %} | |
| {% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %} | |
| {% set restore = False if printer.toolhead.extruder == '' | |
| else True if params.RESTORE|default(1)|int == 1 else False %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}" | |
| {% if idle_timeout > 0 %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout} | |
| SET_IDLE_TIMEOUT TIMEOUT={idle_timeout} | |
| {% endif %} | |
| PAUSE_BASE | |
| {client.user_pause_macro|default("")} | |
| _TOOLHEAD_PARK_PAUSE_CANCEL {rawparams} | |
| [gcode_macro RESUME] | |
| description = Resume the actual running print | |
| rename_existing = RESUME_BASE | |
| variable_last_extruder_temp = {'restore': False, 'temp': 0} | |
| variable_restore_idle_timeout = 0 | |
| variable_idle_state = False | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set sp_move = client.speed_move|default(velocity) %} | |
| {% set runout_resume = True if client.runout_sensor|default("") == "" | |
| else True if not printer[client.runout_sensor].enabled | |
| else printer[client.runout_sensor].filament_detected %} | |
| {% set can_extrude = True if printer.toolhead.extruder == '' | |
| else printer[printer.toolhead.extruder].can_extrude %} | |
| {% set do_resume = False %} | |
| {% set prompt_txt = [] %} | |
| {% if printer.idle_timeout.state|upper == "IDLE" or idle_state %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False | |
| {% if last_extruder_temp.restore %} | |
| RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }' | |
| M109 S{last_extruder_temp.temp} | |
| {% set do_resume = True %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% if runout_resume %} | |
| {% if do_resume %} | |
| {% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} | |
| {client.user_resume_macro|default("")} | |
| _CLIENT_EXTRUDE | |
| RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}' | |
| {% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %} | |
| {% endif %} | |
| {% if not (runout_resume and do_resume) %} | |
| RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!" | |
| {% for element in prompt_txt %} | |
| RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}' | |
| {% endfor %} | |
| RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info" | |
| RESPOND TYPE=command MSG="action:prompt_show" | |
| {% endif %} | |
| [gcode_macro SET_PAUSE_NEXT_LAYER] | |
| description = Enable a pause if the next layer is reached | |
| gcode = | |
| {% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %} | |
| {% set ENABLE = params.ENABLE|default(1)|int != 0 %} | |
| {% set MACRO = params.MACRO|default(pause_next_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}" | |
| [gcode_macro SET_PAUSE_AT_LAYER] | |
| description = Enable/disable a pause if a given layer number is reached | |
| gcode = | |
| {% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %} | |
| {% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined | |
| else params.LAYER is defined %} | |
| {% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %} | |
| {% set MACRO = params.MACRO|default(pause_at_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}" | |
| [gcode_macro SET_PRINT_STATS_INFO] | |
| rename_existing = SET_PRINT_STATS_INFO_BASE | |
| description = Overwrite, to get pause_next_layer and pause_at_layer feature | |
| variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" } | |
| variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" } | |
| gcode = | |
| {% if pause_next_layer.enable %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}' | |
| {pause_next_layer.call} | |
| SET_PAUSE_NEXT_LAYER ENABLE=0 | |
| {% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}' | |
| {pause_at_layer.call} | |
| SET_PAUSE_AT_LAYER ENABLE=0 | |
| {% endif %} | |
| SET_PRINT_STATS_INFO_BASE {rawparams} | |
| [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL] | |
| description = Helper: park toolhead used in PAUSE and CANCEL_PRINT | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %} | |
| {% set custom_park_x = client.custom_park_x|default(0.0) %} | |
| {% set custom_park_y = client.custom_park_y|default(0.0) %} | |
| {% set park_dz = client.custom_park_dz|default(2.0)|abs %} | |
| {% set sp_hop = client.speed_hop|default(15) * 60 %} | |
| {% set sp_move = client.speed_move|default(velocity) * 60 %} | |
| {% set origin = printer.gcode_move.homing_origin %} | |
| {% set act = printer.gcode_move.gcode_position %} | |
| {% set max = printer.toolhead.axis_maximum %} | |
| {% set cone = printer.toolhead.cone_start_z|default(max.z) %} | |
| {% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch'] | |
| else False %} | |
| {% set z_min = params.Z_MIN|default(0)|float %} | |
| {% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %} | |
| {% set x_park = params.X if params.X is defined | |
| else custom_park_x if use_custom | |
| else 0.0 if round_bed | |
| else (max.x - 5.0) %} | |
| {% set y_park = params.Y if params.Y is defined | |
| else custom_park_y if use_custom | |
| else (max.y - 5.0) if round_bed and z_park < cone | |
| else 0.0 if round_bed | |
| else (max.y - 5.0) %} | |
| _CLIENT_RETRACT | |
| {% if "xyz" in printer.toolhead.homed_axes %} | |
| G90 | |
| G1 Z{z_park} F{sp_hop} | |
| G1 X{x_park} Y{y_park} F{sp_move} | |
| {% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='Printer not homed' | |
| {% endif %} | |
| [gcode_macro _CLIENT_EXTRUDE] | |
| description = Extrudes, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %} | |
| {% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_unretract)|default(35) %} | |
| {% set absolute_extrude = printer.gcode_move.absolute_extrude %} | |
| {% if printer.toolhead.extruder != '' %} | |
| {% if printer[printer.toolhead.extruder].can_extrude %} | |
| {% if use_fw_retract %} | |
| {% if length < 0 %} | |
| G10 | |
| {% else %} | |
| G11 | |
| {% endif %} | |
| {% else %} | |
| M83 | |
| G1 E{length} F{(speed|float|abs) * 60} | |
| {% if absolute_extrude %} | |
| M82 | |
| {% endif %} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}' | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _CLIENT_RETRACT] | |
| description = Retracts, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set length = params.LENGTH|default(client.retract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_retract)|default(35) %} | |
| _CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs} | |
| [autotune_tmc stepper_x] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc stepper_y] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc extruder] | |
| motor = moons-cse14hra1l410a | |
| tuning_goal = performance | |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing = _BED_MESH_CALIBRATE | |
| gcode = | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} | |
| {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} | |
| {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} | |
| {% set attach_macro = kamp_settings.attach_macro | string %} | |
| {% set detach_macro = kamp_settings.detach_macro | string %} | |
| {% set mesh_margin = kamp_settings.mesh_margin | float %} | |
| {% set fuzz_amount = kamp_settings.fuzz_amount | float %} | |
| {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} | |
| {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} | |
| {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %} | |
| {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %} | |
| {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} | |
| {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} | |
| {% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} | |
| {% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} | |
| {% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %} | |
| {% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %} | |
| {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %} | |
| {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %} | |
| {% if (([points_x, points_y]|max) > 6) %} | |
| {% set algorithm = "bicubic" %} | |
| {% set min_points = 4 %} | |
| {% else %} | |
| {% set algorithm = "lagrange" %} | |
| {% set min_points = 3 %} | |
| {% endif %} | |
| {% set points_x = [points_x , min_points]|max %} | |
| {% set points_y = [points_y , min_points]|max %} | |
| {% set points_x = [points_x , probe_count[0]]|min %} | |
| {% set points_y = [points_y , probe_count[1]]|min %} | |
| {% if verbose_enable == True %} | |
| {% if printer.exclude_object.objects != [] %} | |
| { action_respond_info( "Algorithm: {}.".format( | |
| (algorithm), | |
| )) } | |
| { action_respond_info("Default probe count: {},{}.".format( | |
| (probe_count[0]), | |
| (probe_count[1]), | |
| )) } | |
| { action_respond_info("Adapted probe count: {},{}.".format( | |
| (points_x), | |
| (points_y), | |
| )) } | |
| {action_respond_info("Default mesh bounds: {}, {}.".format( | |
| (bed_mesh_min[0],bed_mesh_min[1]), | |
| (bed_mesh_max[0],bed_mesh_max[1]), | |
| )) } | |
| {% if mesh_margin > 0 %} | |
| {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format( | |
| (mesh_margin), | |
| (mesh_margin), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Mesh margin is 0, margin not increased.")} | |
| {% endif %} | |
| {% if fuzz_amount > 0 %} | |
| {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format( | |
| (fuzz_amount), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")} | |
| {% endif %} | |
| { action_respond_info("Adapted mesh bounds: {}, {}.".format( | |
| (adapted_x_min, adapted_y_min), | |
| (adapted_x_max, adapted_y_max), | |
| )) } | |
| {action_respond_info("KAMP adjustments successful. Happy KAMPing!")} | |
| {% else %} | |
| {action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")} | |
| G4 P5000 | |
| {% endif %} | |
| {% endif %} | |
| {% if probe_dock_enable == True %} | |
| {attach_macro} | |
| {% endif %} | |
| _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y} | |
| {% if probe_dock_enable == True %} | |
| {detach_macro} | |
| {% endif %} | |
| [gcode_macro LINE_PURGE] | |
| description = A purge macro that adapts to be near your actual printed objects | |
| gcode = | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %} | |
| {% if printer.firmware_retraction is defined %} | |
| {% set RETRACT = G10 | string %} | |
| {% set UNRETRACT = G11 | string %} | |
| {% else %} | |
| {% set RETRACT = 'G1 E-.5 F2100' | string %} | |
| {% set UNRETRACT = 'G1 E.5 F2100' | string %} | |
| {% endif %} | |
| {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %} | |
| {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %} | |
| {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %} | |
| {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %} | |
| {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %} | |
| {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} | |
| {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} | |
| {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} | |
| {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} | |
| {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} | |
| {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} | |
| {% set purge_move_speed = (flow_rate / 5.0) * 60 | float %} | |
| {% if cross_section < 5 %} | |
| {action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")} | |
| {% else %} | |
| {% if verbose_enable == True %} | |
| {action_respond_info("Moving filament tip {}mms".format( | |
| (tip_distance), | |
| )) } | |
| {% endif %} | |
| {% if printer.firmware_retraction is defined %} | |
| {action_respond_info("KAMP purge is using firmware retraction.")} | |
| {% else %} | |
| {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")} | |
| {% endif %} | |
| {% if purge_y_origin > 0 %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_center), | |
| (purge_y_origin), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% else %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_origin), | |
| (purge_y_center), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Prepurge_State | |
| {% if purge_y_origin > 0 %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_center} Y{purge_y_origin} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 X{purge_x_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% else %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_origin} Y{purge_y_center} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 Y{purge_y_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% endif %} | |
| RESTORE_GCODE_STATE NAME=Prepurge_State | |
| {% endif %} | |
| [gcode_macro SMART_PARK] | |
| description = Parks your printhead near the print area for pre-print hotend heating. | |
| gcode = | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set z_height = kamp_settings.smart_park_height | float %} | |
| {% set purge_margin = kamp_settings.purge_margin | float %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} | |
| {% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} | |
| {% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %} | |
| {% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(center_x) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(center_y) %} | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% if purge_margin > 0 and x_min != center_x and y_min != center_y %} | |
| {% set x_min = [ x_min - purge_margin , x_min ] | min %} | |
| {% set y_min = [ y_min - purge_margin , y_min ] | min %} | |
| {% set x_min = [ x_min , axis_minimum_x ] | max %} | |
| {% set y_min = [ y_min , axis_minimum_y ] | max %} | |
| {% endif %} | |
| {% if verbose_enable == True %} | |
| { action_respond_info("Smart Park location: {},{}.".format( | |
| (x_min), | |
| (y_min), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Presmartpark_State | |
| G90 | |
| {% if printer.toolhead.position.z < z_height %} | |
| G0 Z{z_height} | |
| {% endif %} | |
| G0 X{x_min} Y{y_min} F{travel_speed} | |
| G0 Z{z_height} | |
| RESTORE_GCODE_STATE NAME=Presmartpark_State | |
| [gcode_macro _KAMP_Settings] | |
| description = This macro contains all adjustable settings for KAMP | |
| variable_verbose_enable = True | |
| variable_mesh_margin = 5 | |
| variable_fuzz_amount = 1 | |
| variable_probe_dock_enable = False | |
| variable_attach_macro = 'Attach_Probe' | |
| variable_detach_macro = 'Dock_Probe' | |
| variable_purge_height = 0.8 | |
| variable_tip_distance = 0 | |
| variable_purge_margin = 10 | |
| variable_purge_amount = 30 | |
| variable_flow_rate = 12 | |
| variable_smart_park_height = 10 | |
| gcode = | |
| {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")} | |
| [gcode_macro _TAP_VARIABLES] | |
| variable_probing = 0 | |
| variable_brushed = 0 | |
| variable_speed_multiplier = 100 | |
| gcode = | |
| [homing_override] | |
| axes = xyz | |
| gcode = | |
| set_stepper_enable stepper=stepper_x enable=1 | |
| set_stepper_enable stepper=stepper_y enable=1 | |
| {% if not 'X' in params and not 'Y' in params and not 'Z' in params %} | |
| G28 X | |
| G28 Y | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% else %} | |
| {% if 'X' in params %} | |
| G28 X | |
| {% endif %} | |
| {% if 'Y' in params %} | |
| G28 Y | |
| {% endif %} | |
| {% if 'Z' in params %} | |
| set_stepper_enable stepper=stepper_z enable=1 | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _PRE_PROBE_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| {% set BRUSHED = printer["gcode_macro _TAP_VARIABLES"].brushed %} | |
| {% if BRUSHED == 1 %} | |
| _PROBE_TEMP_CHECK | |
| {% else %} | |
| NOZZLE_BRUSH | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=1 | |
| _PROBE_TEMP_CHECK | |
| {% endif %} | |
| [gcode_macro _PROBE_TEMP_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| SET_KINEMATICS_LIMIT Z_ACCEL={PROBE_ACCEL} | |
| {% if TARGET_TEMP > PROBE_TEMP %} | |
| { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) } | |
| M109 S{PROBE_TEMP} | |
| {% else %} | |
| {% if ACTUAL_TEMP > MAX_TEMP %} | |
| { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) } | |
| TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={MAX_TEMP} | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _POST_PROBING] | |
| gcode = | |
| SET_KINEMATICS_LIMIT Z_ACCEL={printer["gcode_macro _TAP_SETTINGS"].max_z_accel} | |
| [gcode_macro _POST_PROBE] | |
| gcode = | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro SET_PROBE_TEMP] | |
| gcode = | |
| {% set temp = params.TEMP|int %} | |
| SAVE_VARIABLE VARIABLE=probe_temp VALUE={TEMP} | |
| [gcode_macro Z_TILT_ADJUST] | |
| rename_existing = Z_TILT_ADJUST_REAL | |
| gcode = | |
| Z_TILT_ADJUST_REAL | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro _TAP_SETTINGS] | |
| variable_probe_accel = 15 | |
| variable_home_x = 175 | |
| variable_home_y = 175 | |
| variable_home_speed = 300 | |
| variable_max_z_accel = 500 | |
| gcode = | |
| [mcu] | |
| serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_JKYZ-if00 | |
| [danger_options] | |
| allow_plugin_override = True | |
| [printer] | |
| square_corner_velocity = 5.0 | |
| kinematics = limited_corexy | |
| max_velocity = 564 | |
| max_z_velocity = 100 | |
| max_accel = 10000 | |
| max_x_accel = 9000 | |
| max_y_accel = 8000 | |
| max_z_accel = 500 | |
| scale_xy_accel = True | |
| [thermistor NTC10K] | |
| temperature1 = 0.0 | |
| resistance1 = 32116.0 | |
| temperature2 = 40.0 | |
| resistance2 = 5309.0 | |
| temperature3 = 80.0 | |
| resistance3 = 1228.0 | |
| [stepper_x] | |
| step_pin = PE11 | |
| dir_pin = !PE10 | |
| enable_pin = !PE9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB14 | |
| position_min = 0 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| step_pulse_duration = 0.000004 | |
| [tmc2209 stepper_x] | |
| uart_pin = PE7 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_y] | |
| step_pin = PD8 | |
| dir_pin = PB12 | |
| enable_pin = !PD9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB13 | |
| position_min = 0 | |
| step_pulse_duration = 0.000004 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| [tmc2209 stepper_y] | |
| uart_pin = PE15 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_z] | |
| step_pin = PE2 | |
| dir_pin = PE4 | |
| enable_pin = !PE3 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| endstop_pin = probe:z_virtual_endstop | |
| position_max = 290 | |
| position_min = -5 | |
| homing_speed = 50 | |
| second_homing_speed = 10 | |
| homing_retract_dist = 3 | |
| [tmc2209 stepper_z] | |
| uart_pin = PC14 | |
| uart_address = 0 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z1] | |
| step_pin = PE6 | |
| dir_pin = PC13 | |
| enable_pin = !PE5 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z1] | |
| uart_pin = PA15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z2] | |
| step_pin = PD12 | |
| dir_pin = PC4 | |
| enable_pin = !PE8 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z2] | |
| uart_pin = PC15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [extruder] | |
| step_pin = PD5 | |
| dir_pin = !PD6 | |
| enable_pin = !PD4 | |
| rotation_distance = 21.525 | |
| gear_ratio = 50:10 | |
| microsteps = 16 | |
| full_steps_per_rotation = 200 | |
| nozzle_diameter = 0.600 | |
| filament_diameter = 1.75 | |
| heater_pin = PB15 | |
| sensor_type = PT1000 | |
| sensor_pin = PC0 | |
| min_temp = 10 | |
| max_temp = 315 | |
| max_power = 1.0 | |
| min_extrude_temp = 170 | |
| heater_power = 115 | |
| cooling_fan = fan | |
| ambient_temp_sensor = heater_generic chamber_heater | |
| pressure_advance = 0.05 | |
| pressure_advance_smooth_time = 0.040 | |
| max_extrude_cross_section = 5 | |
| pid_version = 1 | |
| pid_target = 285.00 | |
| pid_tolerance = 0.0200 | |
| pid_kp = 18.086 | |
| pid_ki = 0.536 | |
| pid_kd = 152.599 | |
| control = mpc | |
| block_heat_capacity = 31.2858 | |
| sensor_responsiveness = 0.0630773 | |
| ambient_transfer = 0.238396 | |
| fan_ambient_transfer = 0.238396, 0.258204, 0.262609 | |
| [tmc2209 extruder] | |
| uart_pin = PD7 | |
| interpolate = true | |
| run_current = 0.65 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| [verify_heater extruder] | |
| hysteresis = 15 | |
| heating_gain = 0.5 | |
| check_gain_time = 120 | |
| [heater_bed] | |
| heater_pin = PB4 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PB0 | |
| max_power = 0.8 | |
| min_temp = 5 | |
| max_temp = 170 | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [probe] | |
| pin = !PA3 | |
| x_offset = 0 | |
| y_offset = 0 | |
| speed = 50.0 | |
| samples = 4 | |
| samples_result = median | |
| sample_retract_dist = 3.0 | |
| samples_tolerance = 0.05 | |
| samples_tolerance_retries = 5 | |
| deactivate_on_each_sample = True | |
| activate_gcode = | |
| _PRE_PROBE_CHECK | |
| deactivate_gcode = | |
| _POST_PROBING | |
| z_offset = -1.160 | |
| [heater_fan hotend_fan] | |
| pin = PA13 | |
| max_power = 1.0 | |
| kick_start_time = 0.5 | |
| heater = extruder | |
| heater_temp = 50.0 | |
| fan_speed = 1.0 | |
| [fan] | |
| pin = PA14 | |
| max_power = 0.4 | |
| kick_start_time = 0.5 | |
| off_below = 0.10 | |
| [neopixel my_neopixel] | |
| pin = PD3 | |
| chain_count = 26 | |
| color_order = GRBW | |
| initial_red = 0.2 | |
| initial_green = 0.2 | |
| initial_blue = 0.2 | |
| [idle_timeout] | |
| timeout = 9999999999 | |
| [bed_mesh] | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| mesh_min = 40, 40 | |
| mesh_max = 310,310 | |
| fade_start = 0.6 | |
| fade_end = 10.0 | |
| probe_count = 7,7 | |
| algorithm = bicubic | |
| adaptive_margin = 5 | |
| [z_tilt] | |
| z_positions = | |
| -50, 18 | |
| 150, 348 | |
| 350, 18 | |
| points = | |
| 30, 5 | |
| 175, 295 | |
| 320, 5 | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| retries = 10 | |
| retry_tolerance = 0.007 | |
| [gcode_macro G32] | |
| gcode = | |
| BED_MESH_CLEAR | |
| G28 | |
| Z_TILT_ADJUST | |
| G28 | |
| G0 X175 Y175 Z30 F3600 | |
| [save_variables] | |
| filename = ~/printer_data/config/variables.cfg | |
| [gcode_macro PRINT_START] | |
| gcode = | |
| {% set chamber = printer.extruder.filament.chamber %} | |
| G28 | |
| HEAT_BED_AND_WAIT | |
| SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="z_thermal_adjust" MINIMUM={printer.extruder.filament.chamber + 2} | |
| G28 Z | |
| BED_MESH_CALIBRATE | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| G92 E0 | |
| G90 | |
| HEAT_EXTRUDER_AND_WAIT | |
| LINE_PURGE | |
| [gcode_macro PRINT_END] | |
| gcode = | |
| M400 | |
| G92 E0 | |
| G1 E-1.0 F3600 | |
| G91 | |
| G0 Z1.00 X20.0 Y20.0 F20000 | |
| TURN_OFF_HEATERS | |
| M107 | |
| G90 | |
| G0 X350 Y350 F3600 | |
| [exclude_object] | |
| [gcode_arcs] | |
| resolution = 0.1 | |
| [input_shaper] | |
| enabled_extruders = extruder | |
| smoother_freq_x = 56.6 | |
| shaper_type_x = smooth_ei | |
| smoother_freq_y = 30.8 | |
| shaper_type_y = smooth_ei | |
| [filaments] | |
| on_set_filament_gcode = | |
| M117 add | |
| on_clear_filament_gcode = | |
| M117 clear | |
| [z_thermal_adjust] | |
| temp_coeff = 0.005 | |
| smooth_time = 1 | |
| sensor_type = NTC10K | |
| sensor_pin = PC2 | |
| min_temp = 10 | |
| max_temp = 67 | |
| gcode_id = thermal_adjust | |
| [heater_generic chamber_heater] | |
| heater_pin = PC8 | |
| max_power = 1.0 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PC3 | |
| min_temp = 10 | |
| max_temp = 67 | |
| pid_version = 1 | |
| pid_target = 60.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 64.228 | |
| pid_ki = 0.421 | |
| pid_kd = 2450.039 | |
| [heater_fan chamber_heater_fan] | |
| pin = PB2 | |
| max_power = 1.0 | |
| heater = chamber_heater | |
| heater_temp = 35 | |
| [verify_heater chamber_heater] | |
| hysteresis = 5 | |
| heating_gain = 0.1 | |
| check_gain_time = 480 | |
| [skew_correction] | |
| [pid_profile extruder abs] | |
| pid_version = 1 | |
| pid_target = 260.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 16.100 | |
| pid_ki = 1.058 | |
| pid_kd = 61.259 | |
| [pid_profile heater_bed abs] | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [skew_correction skew] | |
| xy_skew = 0.000 | |
| xz_skew = 0.000 | |
| yz_skew = 0.000 | |
| [pid_profile extruder pc] | |
| pid_version = 1 | |
| pid_target = 250.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 17.627 | |
| pid_ki = 1.013 | |
| pid_kd = 76.678 | |
| [bed_mesh default] | |
| version = 1 | |
| points = | |
| -0.244063, -0.128750, -0.016563 | |
| 0.047500, 0.101562, 0.103125 | |
| 0.092500, 0.089062, 0.130000 | |
| -0.030625, -0.011875, 0.086875 | |
| x_count = 3 | |
| y_count = 4 | |
| mesh_x_pps = 2 | |
| mesh_y_pps = 2 | |
| algo = lagrange | |
| tension = 0.2 | |
| min_x = 137.37 | |
| max_x = 213.01 | |
| min_y = 110.52 | |
| max_y = 239.46 | |
| ======================= | |
| Loaded MCU 'mcu' 105 commands ( v0.10.0-557-gf7e29b27 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-12+11) 2.31.1) | |
| MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1 | |
| Configured MCU 'mcu' (1024 moves) | |
| toolhead: max_velocity: 564.000000 | |
| max_accel: 8000.000000 | |
| minimum_cruise_ratio: 0.500000 | |
| square_corner_velocity: 250.000000 | |
| Args: ['/home/orangepi/klipper/klippy/klippy.py', '/home/orangepi/printer_data/config/printer.cfg', '-I', '/home/orangepi/printer_data/comms/klippy.serial', '-l', '/home/orangepi/printer_data/logs/klippy.log', '-a', '/home/orangepi/printer_data/comms/klippy.sock'] | |
| App Name: Danger-Klipper | |
| Git version: 'v0.12.0-476-g10002c97' | |
| Branch: bleeding-edge-v2 | |
| Remote: origin | |
| Tracked URL: https://github.com/DangerKlippers/danger-klipper | |
| CPU: 4 core ? | |
| Python: '3.11.2 (main, Mar 2 2024, 20:28:50) [GCC 12.2.0]' | |
| webhooks client 547876391120: {'program': 'Moonraker', 'version': 'v0.8.0-354-gba94285'} | |
| =============== Log rollover at Tue Aug 6 00:00:00 2024 =============== | |
| Stats 616431.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6831774 bytes_read=7173542 bytes_retransmit=9 bytes_invalid=0 send_seq=253529 receive_seq=253529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=98.3 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.63 cputime=6624.914 memavail=3613208 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=175.6 pwm=1.000 | |
| Stats 616432.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6831954 bytes_read=7174053 bytes_retransmit=9 bytes_invalid=0 send_seq=253543 receive_seq=253543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003753 heater_bed: target=0 temp=98.3 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.63 cputime=6624.976 memavail=3613276 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=174.8 pwm=1.000 | |
| Stats 616433.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6832128 bytes_read=7174533 bytes_retransmit=9 bytes_invalid=0 send_seq=253556 receive_seq=253556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003716 heater_bed: target=0 temp=98.2 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.63 cputime=6625.026 memavail=3610428 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=174.1 pwm=1.000 | |
| Stats 616434.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6832318 bytes_read=7175034 bytes_retransmit=9 bytes_invalid=0 send_seq=253570 receive_seq=253570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003637 heater_bed: target=0 temp=98.1 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.63 cputime=6625.084 memavail=3526620 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=173.6 pwm=1.000 | |
| Stats 616435.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6832492 bytes_read=7175529 bytes_retransmit=9 bytes_invalid=0 send_seq=253583 receive_seq=253583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003640 heater_bed: target=0 temp=98.0 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.63 cputime=6625.135 memavail=3550512 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=173.7 pwm=1.000 | |
| Stats 616436.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6832666 bytes_read=7176009 bytes_retransmit=9 bytes_invalid=0 send_seq=253596 receive_seq=253596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003583 heater_bed: target=0 temp=98.0 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.82 cputime=6625.189 memavail=3595168 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=173.9 pwm=1.000 | |
| Stats 616437.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6832840 bytes_read=7176490 bytes_retransmit=9 bytes_invalid=0 send_seq=253609 receive_seq=253609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003555 heater_bed: target=0 temp=97.9 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.82 cputime=6625.247 memavail=3596936 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=174.4 pwm=1.000 | |
| Stats 616438.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833030 bytes_read=7176990 bytes_retransmit=9 bytes_invalid=0 send_seq=253623 receive_seq=253623 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003487 heater_bed: target=0 temp=97.8 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.82 cputime=6625.301 memavail=3596264 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=175.0 pwm=1.000 | |
| Stats 616439.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833204 bytes_read=7177470 bytes_retransmit=9 bytes_invalid=0 send_seq=253636 receive_seq=253636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003519 heater_bed: target=0 temp=97.7 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.82 cputime=6625.352 memavail=3587588 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=176.3 pwm=1.000 | |
| Stats 616440.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833378 bytes_read=7177953 bytes_retransmit=9 bytes_invalid=0 send_seq=253649 receive_seq=253649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003525 heater_bed: target=0 temp=97.6 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.82 cputime=6625.405 memavail=3573500 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=177.5 pwm=1.000 | |
| Stats 616441.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833552 bytes_read=7178439 bytes_retransmit=9 bytes_invalid=0 send_seq=253662 receive_seq=253662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003624 heater_bed: target=0 temp=97.5 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.83 cputime=6625.458 memavail=3564436 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=178.6 pwm=1.000 | |
| Stats 616442.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833742 bytes_read=7178924 bytes_retransmit=9 bytes_invalid=0 send_seq=253676 receive_seq=253676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003617 heater_bed: target=0 temp=97.4 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.83 cputime=6625.510 memavail=3564428 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=180.4 pwm=1.000 | |
| Stats 616443.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6833916 bytes_read=7179405 bytes_retransmit=9 bytes_invalid=0 send_seq=253689 receive_seq=253689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003691 heater_bed: target=0 temp=97.3 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.83 cputime=6625.561 memavail=3571404 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=182.1 pwm=1.000 | |
| Stats 616444.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834090 bytes_read=7179900 bytes_retransmit=9 bytes_invalid=0 send_seq=253702 receive_seq=253702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003689 heater_bed: target=0 temp=97.2 pwm=0.000 z_thermal_adjust: temp=56.9 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.83 cputime=6625.614 memavail=3571500 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=184.2 pwm=1.000 | |
| Stats 616445.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834264 bytes_read=7180395 bytes_retransmit=9 bytes_invalid=0 send_seq=253715 receive_seq=253715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003621 heater_bed: target=0 temp=97.1 pwm=0.000 z_thermal_adjust: temp=56.9 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.83 cputime=6625.666 memavail=3571508 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=186.1 pwm=1.000 | |
| Stats 616446.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834438 bytes_read=7180876 bytes_retransmit=9 bytes_invalid=0 send_seq=253728 receive_seq=253728 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003611 heater_bed: target=0 temp=97.0 pwm=0.000 z_thermal_adjust: temp=56.8 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.93 cputime=6625.716 memavail=3571508 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=187.9 pwm=1.000 | |
| Stats 616447.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834628 bytes_read=7181376 bytes_retransmit=9 bytes_invalid=0 send_seq=253742 receive_seq=253742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003597 heater_bed: target=0 temp=96.9 pwm=0.000 z_thermal_adjust: temp=56.7 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.93 cputime=6625.766 memavail=3571456 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=189.9 pwm=1.000 | |
| Stats 616448.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834802 bytes_read=7181856 bytes_retransmit=9 bytes_invalid=0 send_seq=253755 receive_seq=253755 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003600 heater_bed: target=0 temp=96.8 pwm=0.000 z_thermal_adjust: temp=56.6 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.93 cputime=6625.818 memavail=3571528 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=192.3 pwm=1.000 | |
| Stats 616449.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6834976 bytes_read=7182337 bytes_retransmit=9 bytes_invalid=0 send_seq=253768 receive_seq=253768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003618 heater_bed: target=0 temp=96.7 pwm=0.000 z_thermal_adjust: temp=56.5 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.93 cputime=6625.870 memavail=3571448 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=194.4 pwm=1.000 | |
| Stats 616450.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6835150 bytes_read=7182847 bytes_retransmit=9 bytes_invalid=0 send_seq=253781 receive_seq=253781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003579 heater_bed: target=0 temp=96.7 pwm=0.000 z_thermal_adjust: temp=56.4 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.93 cputime=6625.924 memavail=3571520 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=196.3 pwm=1.000 | |
| Stats 616451.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6835335 bytes_read=7183329 bytes_retransmit=9 bytes_invalid=0 send_seq=253794 receive_seq=253794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003584 heater_bed: target=0 temp=96.6 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=55.0 pwm=0.000 sysload=3.01 cputime=6625.976 memavail=3571504 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=199.0 pwm=1.000 | |
| Stats 616452.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6835509 bytes_read=7183813 bytes_retransmit=9 bytes_invalid=0 send_seq=253807 receive_seq=253807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003592 heater_bed: target=0 temp=96.5 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.9 pwm=0.000 sysload=3.01 cputime=6626.027 memavail=3571544 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=201.0 pwm=1.000 | |
| Stats 616453.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6835683 bytes_read=7184312 bytes_retransmit=9 bytes_invalid=0 send_seq=253820 receive_seq=253820 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003613 heater_bed: target=0 temp=96.4 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=54.9 pwm=0.000 sysload=3.01 cputime=6626.077 memavail=3571476 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=203.0 pwm=1.000 | |
| Stats 616454.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6835857 bytes_read=7184795 bytes_retransmit=9 bytes_invalid=0 send_seq=253833 receive_seq=253833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003540 heater_bed: target=0 temp=96.4 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=54.8 pwm=0.000 sysload=3.01 cputime=6626.127 memavail=3571580 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=205.9 pwm=1.000 | |
| Stats 616455.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836047 bytes_read=7185299 bytes_retransmit=9 bytes_invalid=0 send_seq=253847 receive_seq=253847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003503 heater_bed: target=0 temp=96.3 pwm=0.000 z_thermal_adjust: temp=55.9 chamber_heater: target=0 temp=54.8 pwm=0.000 sysload=3.01 cputime=6626.180 memavail=3597244 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=208.0 pwm=1.000 | |
| Stats 616456.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836216 bytes_read=7185793 bytes_retransmit=9 bytes_invalid=0 send_seq=253859 receive_seq=253859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003510 heater_bed: target=0 temp=96.2 pwm=0.000 z_thermal_adjust: temp=55.8 chamber_heater: target=0 temp=54.7 pwm=0.000 sysload=3.33 cputime=6626.230 memavail=3597344 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=210.1 pwm=1.000 | |
| Stats 616457.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836390 bytes_read=7186276 bytes_retransmit=9 bytes_invalid=0 send_seq=253872 receive_seq=253872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003539 heater_bed: target=0 temp=96.1 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=54.6 pwm=0.000 sysload=3.33 cputime=6626.282 memavail=3597208 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=212.5 pwm=1.000 | |
| Stats 616458.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836564 bytes_read=7186760 bytes_retransmit=9 bytes_invalid=0 send_seq=253885 receive_seq=253885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003598 heater_bed: target=0 temp=96.0 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=54.6 pwm=0.000 sysload=3.33 cputime=6626.333 memavail=3595004 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=214.8 pwm=1.000 | |
| Stats 616459.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836754 bytes_read=7187264 bytes_retransmit=9 bytes_invalid=0 send_seq=253899 receive_seq=253899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003553 heater_bed: target=0 temp=95.9 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.33 cputime=6626.387 memavail=3596128 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=216.7 pwm=1.000 | |
| Stats 616460.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836928 bytes_read=7187762 bytes_retransmit=9 bytes_invalid=0 send_seq=253912 receive_seq=253912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003532 heater_bed: target=0 temp=95.9 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.33 cputime=6626.439 memavail=3587804 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=219.7 pwm=1.000 | |
| Stats 616461.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6837102 bytes_read=7188246 bytes_retransmit=9 bytes_invalid=0 send_seq=253925 receive_seq=253925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003641 heater_bed: target=0 temp=95.8 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.39 cputime=6626.492 memavail=3572908 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=221.1 pwm=1.000 | |
| Stats 616462.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6837303 bytes_read=7188750 bytes_retransmit=9 bytes_invalid=0 send_seq=253939 receive_seq=253939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003641 heater_bed: target=0 temp=95.8 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.39 cputime=6626.546 memavail=3564152 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=223.2 pwm=0.832 | |
| Stats 616463.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6837510 bytes_read=7189233 bytes_retransmit=9 bytes_invalid=0 send_seq=253952 receive_seq=253952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003669 heater_bed: target=0 temp=95.7 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.39 cputime=6626.597 memavail=3564208 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=225.7 pwm=0.648 | |
| Stats 616464.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6837716 bytes_read=7189713 bytes_retransmit=9 bytes_invalid=0 send_seq=253967 receive_seq=253967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003618 heater_bed: target=0 temp=95.6 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.39 cputime=6626.652 memavail=3570880 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=227.7 pwm=0.517 | |
| Stats 616465.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6837906 bytes_read=7190238 bytes_retransmit=9 bytes_invalid=0 send_seq=253981 receive_seq=253981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003580 heater_bed: target=0 temp=95.6 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.39 cputime=6626.706 memavail=3571152 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=230.0 pwm=0.452 | |
| Stats 616466.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838096 bytes_read=7190712 bytes_retransmit=9 bytes_invalid=0 send_seq=253995 receive_seq=253995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003666 heater_bed: target=0 temp=95.5 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.35 cputime=6626.756 memavail=3571056 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=232.0 pwm=0.398 | |
| Stats 616467.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838270 bytes_read=7191196 bytes_retransmit=9 bytes_invalid=0 send_seq=254008 receive_seq=254008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003628 heater_bed: target=0 temp=95.5 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.35 cputime=6626.808 memavail=3571080 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=233.4 pwm=0.398 | |
| Stats 616468.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838444 bytes_read=7191709 bytes_retransmit=9 bytes_invalid=0 send_seq=254021 receive_seq=254021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003546 heater_bed: target=0 temp=95.4 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.35 cputime=6626.861 memavail=3571040 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=235.4 pwm=0.398 | |
| Stats 616469.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838618 bytes_read=7192178 bytes_retransmit=9 bytes_invalid=0 send_seq=254034 receive_seq=254034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 heater_bed: target=0 temp=95.4 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.35 cputime=6626.912 memavail=3571160 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=236.9 pwm=0.398 | |
| Heater extruder within range of 250.000 | |
| Stats 616470.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838792 bytes_read=7192677 bytes_retransmit=9 bytes_invalid=0 send_seq=254047 receive_seq=254047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003640 heater_bed: target=0 temp=95.3 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.35 cputime=6626.965 memavail=3571216 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=237.9 pwm=0.398 | |
| Stats 616471.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6838982 bytes_read=7193195 bytes_retransmit=9 bytes_invalid=0 send_seq=254061 receive_seq=254061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003728 heater_bed: target=0 temp=95.2 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.33 cputime=6627.017 memavail=3571048 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=239.3 pwm=0.383 | |
| Stats 616472.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6839156 bytes_read=7193664 bytes_retransmit=9 bytes_invalid=0 send_seq=254074 receive_seq=254074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003721 heater_bed: target=0 temp=95.2 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.33 cputime=6627.069 memavail=3571216 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=240.1 pwm=0.383 | |
| Stats 616473.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6839330 bytes_read=7194148 bytes_retransmit=9 bytes_invalid=0 send_seq=254087 receive_seq=254087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003737 heater_bed: target=0 temp=95.1 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.33 cputime=6627.121 memavail=3571168 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=240.8 pwm=0.383 | |
| Stats 616474.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6839520 bytes_read=7194666 bytes_retransmit=9 bytes_invalid=0 send_seq=254101 receive_seq=254101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=95.0 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.33 cputime=6627.176 memavail=3571144 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=241.8 pwm=0.442 | |
| Stats 616475.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6839694 bytes_read=7195150 bytes_retransmit=9 bytes_invalid=0 send_seq=254114 receive_seq=254114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003713 heater_bed: target=0 temp=95.0 pwm=0.000 z_thermal_adjust: temp=55.8 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.33 cputime=6627.229 memavail=3571152 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=242.3 pwm=0.442 | |
| Stats 616476.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6839868 bytes_read=7195649 bytes_retransmit=9 bytes_invalid=0 send_seq=254127 receive_seq=254127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=94.9 pwm=0.000 z_thermal_adjust: temp=55.8 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.22 cputime=6627.280 memavail=3612212 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=242.8 pwm=0.442 | |
| Stats 616477.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840042 bytes_read=7196147 bytes_retransmit=9 bytes_invalid=0 send_seq=254140 receive_seq=254140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003763 heater_bed: target=0 temp=94.9 pwm=0.000 z_thermal_adjust: temp=55.8 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.22 cputime=6627.329 memavail=3612208 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=243.2 pwm=0.495 | |
| Stats 616478.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840227 bytes_read=7196616 bytes_retransmit=9 bytes_invalid=0 send_seq=254153 receive_seq=254153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 heater_bed: target=0 temp=94.8 pwm=0.000 z_thermal_adjust: temp=55.9 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.22 cputime=6627.379 memavail=3612320 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=243.7 pwm=0.495 | |
| Stats 616479.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840401 bytes_read=7197115 bytes_retransmit=9 bytes_invalid=0 send_seq=254166 receive_seq=254166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003814 heater_bed: target=0 temp=94.8 pwm=0.000 z_thermal_adjust: temp=55.9 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.22 cputime=6627.428 memavail=3612320 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=243.9 pwm=0.495 | |
| Stats 616480.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840575 bytes_read=7197628 bytes_retransmit=9 bytes_invalid=0 send_seq=254179 receive_seq=254179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003777 heater_bed: target=0 temp=94.7 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.22 cputime=6627.479 memavail=3612168 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=244.3 pwm=0.495 | |
| Stats 616481.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840749 bytes_read=7198097 bytes_retransmit=9 bytes_invalid=0 send_seq=254192 receive_seq=254192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003721 heater_bed: target=0 temp=94.7 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.20 cputime=6627.528 memavail=3612144 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=244.3 pwm=0.495 | |
| Stats 616482.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6840939 bytes_read=7198601 bytes_retransmit=9 bytes_invalid=0 send_seq=254206 receive_seq=254206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=94.6 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.20 cputime=6627.579 memavail=3612364 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=244.7 pwm=0.527 | |
| Stats 616483.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841113 bytes_read=7199099 bytes_retransmit=9 bytes_invalid=0 send_seq=254219 receive_seq=254219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003761 heater_bed: target=0 temp=94.5 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.20 cputime=6627.628 memavail=3612284 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=244.8 pwm=0.527 | |
| Stats 616484.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841287 bytes_read=7199568 bytes_retransmit=9 bytes_invalid=0 send_seq=254232 receive_seq=254232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003728 heater_bed: target=0 temp=94.5 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.20 cputime=6627.677 memavail=3612308 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=245.2 pwm=0.527 | |
| Stats 616485.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841461 bytes_read=7200097 bytes_retransmit=9 bytes_invalid=0 send_seq=254245 receive_seq=254245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003691 heater_bed: target=0 temp=94.4 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.20 cputime=6627.726 memavail=3612396 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=245.3 pwm=0.527 | |
| Stats 616486.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841646 bytes_read=7200580 bytes_retransmit=9 bytes_invalid=0 send_seq=254258 receive_seq=254258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003619 heater_bed: target=0 temp=94.4 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.19 cputime=6627.776 memavail=3612228 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=245.7 pwm=0.530 | |
| Stats 616487.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841820 bytes_read=7201048 bytes_retransmit=9 bytes_invalid=0 send_seq=254271 receive_seq=254271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003602 heater_bed: target=0 temp=94.3 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.19 cputime=6627.826 memavail=3612408 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=246.0 pwm=0.530 | |
| Stats 616488.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6841994 bytes_read=7201546 bytes_retransmit=9 bytes_invalid=0 send_seq=254284 receive_seq=254284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003658 heater_bed: target=0 temp=94.3 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.19 cputime=6627.874 memavail=3612160 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=246.1 pwm=0.530 | |
| Stats 616489.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6842168 bytes_read=7202024 bytes_retransmit=9 bytes_invalid=0 send_seq=254297 receive_seq=254297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003636 heater_bed: target=0 temp=94.2 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.19 cputime=6627.923 memavail=3612684 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=246.5 pwm=0.530 | |
| Stats 616490.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6842353 bytes_read=7202508 bytes_retransmit=9 bytes_invalid=0 send_seq=254310 receive_seq=254310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003660 heater_bed: target=0 temp=94.2 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.19 cputime=6627.973 memavail=3612644 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=246.8 pwm=0.504 | |
| Stats 616491.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6842527 bytes_read=7203021 bytes_retransmit=9 bytes_invalid=0 send_seq=254323 receive_seq=254323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003668 heater_bed: target=0 temp=94.1 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.09 cputime=6628.020 memavail=3612652 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=246.9 pwm=0.504 | |
| Stats 616492.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6842701 bytes_read=7203501 bytes_retransmit=9 bytes_invalid=0 send_seq=254336 receive_seq=254336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003596 heater_bed: target=0 temp=94.1 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.09 cputime=6628.069 memavail=3612556 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.2 pwm=0.504 | |
| Stats 616493.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6842881 bytes_read=7203983 bytes_retransmit=9 bytes_invalid=0 send_seq=254350 receive_seq=254350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003611 heater_bed: target=0 temp=94.0 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.09 cputime=6628.118 memavail=3612596 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.5 pwm=0.504 | |
| Stats 616494.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843071 bytes_read=7204498 bytes_retransmit=9 bytes_invalid=0 send_seq=254364 receive_seq=254364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003551 heater_bed: target=0 temp=93.9 pwm=0.000 z_thermal_adjust: temp=56.4 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.09 cputime=6628.168 memavail=3612516 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.9 pwm=0.481 | |
| Stats 616495.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843245 bytes_read=7204993 bytes_retransmit=9 bytes_invalid=0 send_seq=254377 receive_seq=254377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 heater_bed: target=0 temp=93.9 pwm=0.000 z_thermal_adjust: temp=56.4 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.09 cputime=6628.217 memavail=3612436 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.0 pwm=0.481 | |
| Stats 616496.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843419 bytes_read=7205459 bytes_retransmit=9 bytes_invalid=0 send_seq=254390 receive_seq=254390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003542 heater_bed: target=0 temp=93.8 pwm=0.000 z_thermal_adjust: temp=56.4 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.08 cputime=6628.268 memavail=3612572 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.2 pwm=0.481 | |
| Stats 616497.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843593 bytes_read=7205969 bytes_retransmit=9 bytes_invalid=0 send_seq=254403 receive_seq=254403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003498 heater_bed: target=0 temp=93.7 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.08 cputime=6628.317 memavail=3612644 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.3 pwm=0.481 | |
| Stats 616498.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843767 bytes_read=7206452 bytes_retransmit=9 bytes_invalid=0 send_seq=254416 receive_seq=254416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003507 heater_bed: target=0 temp=93.7 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=3.08 cputime=6628.366 memavail=3612484 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.6 pwm=0.488 | |
| Stats 616499.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6843952 bytes_read=7206921 bytes_retransmit=9 bytes_invalid=0 send_seq=254429 receive_seq=254429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003582 heater_bed: target=0 temp=93.7 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.08 cputime=6628.416 memavail=3607388 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.7 pwm=0.488 | |
| Stats 616500.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6844126 bytes_read=7207450 bytes_retransmit=9 bytes_invalid=0 send_seq=254442 receive_seq=254442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003674 heater_bed: target=0 temp=93.6 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=3.08 cputime=6628.468 memavail=3612836 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.8 pwm=0.488 | |
| Stats 616501.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6844300 bytes_read=7207933 bytes_retransmit=9 bytes_invalid=0 send_seq=254455 receive_seq=254455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003760 heater_bed: target=0 temp=93.5 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.08 cputime=6628.519 memavail=3612732 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.1 pwm=0.488 | |
| Stats 616502.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6844474 bytes_read=7208402 bytes_retransmit=9 bytes_invalid=0 send_seq=254468 receive_seq=254468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003827 heater_bed: target=0 temp=93.5 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=3.08 cputime=6628.570 memavail=3612660 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.2 pwm=0.488 | |
| Stats 616503.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6844664 bytes_read=7208921 bytes_retransmit=9 bytes_invalid=0 send_seq=254482 receive_seq=254482 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003730 heater_bed: target=0 temp=93.4 pwm=0.000 z_thermal_adjust: temp=55.9 chamber_heater: target=0 temp=54.2 pwm=0.000 sysload=3.08 cputime=6628.620 memavail=3612708 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.5 pwm=0.480 | |
| Stats 616504.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6844838 bytes_read=7209404 bytes_retransmit=9 bytes_invalid=0 send_seq=254495 receive_seq=254495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003703 heater_bed: target=0 temp=93.3 pwm=0.000 z_thermal_adjust: temp=55.8 chamber_heater: target=0 temp=54.2 pwm=0.000 sysload=3.08 cputime=6628.670 memavail=3612780 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.4 pwm=0.480 | |
| Stats 616505.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845012 bytes_read=7209888 bytes_retransmit=9 bytes_invalid=0 send_seq=254508 receive_seq=254508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003607 heater_bed: target=0 temp=93.3 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=54.1 pwm=0.000 sysload=3.08 cputime=6628.718 memavail=3612788 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.4 pwm=0.480 | |
| Stats 616506.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845186 bytes_read=7210402 bytes_retransmit=9 bytes_invalid=0 send_seq=254521 receive_seq=254521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003552 heater_bed: target=0 temp=93.2 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=54.1 pwm=0.000 sysload=2.99 cputime=6628.768 memavail=3612740 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.5 pwm=0.480 | |
| Stats 616507.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845376 bytes_read=7210890 bytes_retransmit=9 bytes_invalid=0 send_seq=254535 receive_seq=254535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003573 heater_bed: target=0 temp=93.2 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=54.0 pwm=0.000 sysload=2.99 cputime=6628.818 memavail=3612692 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.8 pwm=0.471 | |
| Stats 616508.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845550 bytes_read=7211359 bytes_retransmit=9 bytes_invalid=0 send_seq=254548 receive_seq=254548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003530 heater_bed: target=0 temp=93.1 pwm=0.000 z_thermal_adjust: temp=55.4 chamber_heater: target=0 temp=54.0 pwm=0.000 sysload=2.99 cputime=6628.866 memavail=3612844 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.471 | |
| Stats 616509.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845724 bytes_read=7211873 bytes_retransmit=9 bytes_invalid=0 send_seq=254561 receive_seq=254561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003511 heater_bed: target=0 temp=93.1 pwm=0.000 z_thermal_adjust: temp=55.2 chamber_heater: target=0 temp=53.9 pwm=0.000 sysload=2.99 cputime=6628.916 memavail=3612764 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.8 pwm=0.471 | |
| Stats 616510.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6845898 bytes_read=7212371 bytes_retransmit=9 bytes_invalid=0 send_seq=254574 receive_seq=254574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003599 heater_bed: target=0 temp=93.0 pwm=0.000 z_thermal_adjust: temp=55.1 chamber_heater: target=0 temp=53.8 pwm=0.000 sysload=2.99 cputime=6628.967 memavail=3612860 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.471 | |
| Stats 616511.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846083 bytes_read=7212836 bytes_retransmit=9 bytes_invalid=0 send_seq=254587 receive_seq=254587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=93.0 pwm=0.000 z_thermal_adjust: temp=55.0 chamber_heater: target=0 temp=53.7 pwm=0.000 sysload=2.99 cputime=6629.017 memavail=3612956 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.472 | |
| Stats 616512.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846257 bytes_read=7213333 bytes_retransmit=9 bytes_invalid=0 send_seq=254600 receive_seq=254600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003710 heater_bed: target=0 temp=92.9 pwm=0.000 z_thermal_adjust: temp=54.9 chamber_heater: target=0 temp=53.7 pwm=0.000 sysload=2.99 cputime=6629.067 memavail=3612652 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.472 | |
| Stats 616513.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846431 bytes_read=7213815 bytes_retransmit=9 bytes_invalid=0 send_seq=254613 receive_seq=254613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003778 heater_bed: target=0 temp=92.9 pwm=0.000 z_thermal_adjust: temp=54.8 chamber_heater: target=0 temp=53.6 pwm=0.000 sysload=2.99 cputime=6629.115 memavail=3612884 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.472 | |
| Stats 616514.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846605 bytes_read=7214284 bytes_retransmit=9 bytes_invalid=0 send_seq=254626 receive_seq=254626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003839 heater_bed: target=0 temp=92.8 pwm=0.000 z_thermal_adjust: temp=54.7 chamber_heater: target=0 temp=53.5 pwm=0.000 sysload=2.99 cputime=6629.163 memavail=3612764 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.472 | |
| Stats 616515.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846795 bytes_read=7214818 bytes_retransmit=9 bytes_invalid=0 send_seq=254640 receive_seq=254640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003866 heater_bed: target=0 temp=92.8 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.5 pwm=0.000 sysload=2.99 cputime=6629.213 memavail=3612884 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.472 | |
| Stats 616516.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6846969 bytes_read=7215301 bytes_retransmit=9 bytes_invalid=0 send_seq=254653 receive_seq=254653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003914 heater_bed: target=0 temp=92.7 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.4 pwm=0.000 sysload=2.91 cputime=6629.263 memavail=3612796 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.472 | |
| Stats 616517.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6847143 bytes_read=7215770 bytes_retransmit=9 bytes_invalid=0 send_seq=254666 receive_seq=254666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003847 heater_bed: target=0 temp=92.7 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.3 pwm=0.000 sysload=2.91 cputime=6629.312 memavail=3612908 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.472 | |
| Stats 616518.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6847317 bytes_read=7216284 bytes_retransmit=9 bytes_invalid=0 send_seq=254679 receive_seq=254679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003874 heater_bed: target=0 temp=92.6 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=2.91 cputime=6629.358 memavail=3612820 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.472 | |
| Stats 616519.1: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6847491 bytes_read=7216767 bytes_retransmit=9 bytes_invalid=0 send_seq=254692 receive_seq=254692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003895 heater_bed: target=0 temp=92.6 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=2.91 cputime=6629.408 memavail=3612884 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.492 | |
| Stats 616520.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6847676 bytes_read=7217251 bytes_retransmit=9 bytes_invalid=0 send_seq=254705 receive_seq=254705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003865 heater_bed: target=0 temp=92.5 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=2.91 cputime=6629.458 memavail=3612812 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.492 | |
| Stats 616521.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6847850 bytes_read=7217765 bytes_retransmit=9 bytes_invalid=0 send_seq=254718 receive_seq=254718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 heater_bed: target=0 temp=92.5 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=2.76 cputime=6629.506 memavail=3612852 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.492 | |
| Stats 616522.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848024 bytes_read=7218248 bytes_retransmit=9 bytes_invalid=0 send_seq=254731 receive_seq=254731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003809 heater_bed: target=0 temp=92.4 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.76 cputime=6629.556 memavail=3612756 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.492 | |
| Stats 616523.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848198 bytes_read=7218717 bytes_retransmit=9 bytes_invalid=0 send_seq=254744 receive_seq=254744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003707 heater_bed: target=0 temp=92.4 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.76 cputime=6629.606 memavail=3612788 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.492 | |
| Stats 616524.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848388 bytes_read=7219236 bytes_retransmit=9 bytes_invalid=0 send_seq=254758 receive_seq=254758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003661 heater_bed: target=0 temp=92.3 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.76 cputime=6629.652 memavail=3612716 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.470 | |
| Stats 616525.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848562 bytes_read=7219734 bytes_retransmit=9 bytes_invalid=0 send_seq=254771 receive_seq=254771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003605 heater_bed: target=0 temp=92.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.76 cputime=6629.699 memavail=3612736 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.8 pwm=0.470 | |
| Stats 616526.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848736 bytes_read=7220203 bytes_retransmit=9 bytes_invalid=0 send_seq=254784 receive_seq=254784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003660 heater_bed: target=0 temp=92.3 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.70 cputime=6629.748 memavail=3612952 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.470 | |
| Stats 616527.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6848910 bytes_read=7220717 bytes_retransmit=9 bytes_invalid=0 send_seq=254797 receive_seq=254797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003681 heater_bed: target=0 temp=92.2 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.70 cputime=6629.796 memavail=3612752 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.470 | |
| Stats 616528.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849100 bytes_read=7221205 bytes_retransmit=9 bytes_invalid=0 send_seq=254811 receive_seq=254811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003664 heater_bed: target=0 temp=92.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.70 cputime=6629.847 memavail=3612984 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.475 | |
| Stats 616529.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849274 bytes_read=7221674 bytes_retransmit=9 bytes_invalid=0 send_seq=254824 receive_seq=254824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003645 heater_bed: target=0 temp=92.1 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.70 cputime=6629.897 memavail=3612640 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.475 | |
| Stats 616530.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849448 bytes_read=7222203 bytes_retransmit=9 bytes_invalid=0 send_seq=254837 receive_seq=254837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003686 heater_bed: target=0 temp=92.1 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.70 cputime=6629.944 memavail=3612872 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.475 | |
| Stats 616531.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849622 bytes_read=7222686 bytes_retransmit=9 bytes_invalid=0 send_seq=254850 receive_seq=254850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=92.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.72 cputime=6629.991 memavail=3612676 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.8 pwm=0.475 | |
| Stats 616532.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849812 bytes_read=7223160 bytes_retransmit=9 bytes_invalid=0 send_seq=254864 receive_seq=254864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003680 heater_bed: target=0 temp=91.9 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.72 cputime=6630.040 memavail=3612748 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.472 | |
| Stats 616533.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6849986 bytes_read=7223674 bytes_retransmit=9 bytes_invalid=0 send_seq=254877 receive_seq=254877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003673 heater_bed: target=0 temp=91.8 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.72 cputime=6630.086 memavail=3612828 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.472 | |
| Stats 616534.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6850160 bytes_read=7224157 bytes_retransmit=9 bytes_invalid=0 send_seq=254890 receive_seq=254890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003690 heater_bed: target=0 temp=91.8 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.72 cputime=6630.137 memavail=3612748 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.472 | |
| Stats 616535.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6850334 bytes_read=7224636 bytes_retransmit=9 bytes_invalid=0 send_seq=254903 receive_seq=254903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003778 heater_bed: target=0 temp=91.8 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=2.72 cputime=6630.186 memavail=3612892 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.472 | |
| Stats 616536.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6850524 bytes_read=7225139 bytes_retransmit=9 bytes_invalid=0 send_seq=254917 receive_seq=254917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003694 heater_bed: target=0 temp=91.7 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=2.58 cputime=6630.236 memavail=3612788 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.467 | |
| Stats 616537.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6850698 bytes_read=7225622 bytes_retransmit=9 bytes_invalid=0 send_seq=254930 receive_seq=254930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003645 heater_bed: target=0 temp=91.7 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6630.282 memavail=3612792 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.467 | |
| Stats 616538.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6850872 bytes_read=7226091 bytes_retransmit=9 bytes_invalid=0 send_seq=254943 receive_seq=254943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 heater_bed: target=0 temp=91.6 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6630.332 memavail=3612856 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.7 pwm=0.467 | |
| Stats 616539.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851046 bytes_read=7226605 bytes_retransmit=9 bytes_invalid=0 send_seq=254956 receive_seq=254956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003683 heater_bed: target=0 temp=91.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6630.378 memavail=3612696 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.467 | |
| Stats 616540.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851236 bytes_read=7227108 bytes_retransmit=9 bytes_invalid=0 send_seq=254970 receive_seq=254970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003636 heater_bed: target=0 temp=91.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6630.426 memavail=3612784 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.478 | |
| Stats 616541.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851410 bytes_read=7227577 bytes_retransmit=9 bytes_invalid=0 send_seq=254983 receive_seq=254983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003577 heater_bed: target=0 temp=91.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.54 cputime=6630.475 memavail=3612720 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.478 | |
| Stats 616542.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851584 bytes_read=7228091 bytes_retransmit=9 bytes_invalid=0 send_seq=254996 receive_seq=254996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003557 heater_bed: target=0 temp=91.4 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.54 cputime=6630.522 memavail=3612920 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.478 | |
| Stats 616543.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851758 bytes_read=7228574 bytes_retransmit=9 bytes_invalid=0 send_seq=255009 receive_seq=255009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003565 heater_bed: target=0 temp=91.3 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.54 cputime=6630.569 memavail=3612768 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.478 | |
| Stats 616544.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6851932 bytes_read=7229043 bytes_retransmit=9 bytes_invalid=0 send_seq=255022 receive_seq=255022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003554 heater_bed: target=0 temp=91.3 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.54 cputime=6630.619 memavail=3612712 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.478 | |
| Stats 616545.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6852117 bytes_read=7229572 bytes_retransmit=9 bytes_invalid=0 send_seq=255035 receive_seq=255035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003537 heater_bed: target=0 temp=91.3 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.54 cputime=6630.668 memavail=3612744 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.502 | |
| Stats 616546.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6852291 bytes_read=7230055 bytes_retransmit=9 bytes_invalid=0 send_seq=255048 receive_seq=255048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003487 heater_bed: target=0 temp=91.2 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=2.49 cputime=6630.718 memavail=3612744 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.502 | |
| Stats 616547.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6852465 bytes_read=7230539 bytes_retransmit=9 bytes_invalid=0 send_seq=255061 receive_seq=255061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003506 heater_bed: target=0 temp=91.2 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.49 cputime=6630.768 memavail=3612820 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.502 | |
| Stats 616548.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6852639 bytes_read=7231038 bytes_retransmit=9 bytes_invalid=0 send_seq=255074 receive_seq=255074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003490 heater_bed: target=0 temp=91.1 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.49 cputime=6630.816 memavail=3612892 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.502 | |
| Stats 616549.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6852829 bytes_read=7231541 bytes_retransmit=9 bytes_invalid=0 send_seq=255088 receive_seq=255088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003531 heater_bed: target=0 temp=91.1 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=2.49 cputime=6630.865 memavail=3612724 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.486 | |
| Stats 616550.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853003 bytes_read=7232025 bytes_retransmit=9 bytes_invalid=0 send_seq=255101 receive_seq=255101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003543 heater_bed: target=0 temp=91.0 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=2.49 cputime=6630.915 memavail=3612692 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.486 | |
| Stats 616551.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853177 bytes_read=7232524 bytes_retransmit=9 bytes_invalid=0 send_seq=255114 receive_seq=255114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003565 heater_bed: target=0 temp=91.0 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.37 cputime=6630.961 memavail=3612756 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.486 | |
| Stats 616552.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853351 bytes_read=7233007 bytes_retransmit=9 bytes_invalid=0 send_seq=255127 receive_seq=255127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003618 heater_bed: target=0 temp=91.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.37 cputime=6631.010 memavail=3612844 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.486 | |
| Stats 616553.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853541 bytes_read=7233496 bytes_retransmit=9 bytes_invalid=0 send_seq=255141 receive_seq=255141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003569 heater_bed: target=0 temp=90.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.37 cputime=6631.060 memavail=3612956 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.480 | |
| Stats 616554.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853721 bytes_read=7234026 bytes_retransmit=9 bytes_invalid=0 send_seq=255155 receive_seq=255155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003596 heater_bed: target=0 temp=90.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.37 cputime=6631.108 memavail=3612956 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.480 | |
| Stats 616555.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6853895 bytes_read=7234509 bytes_retransmit=9 bytes_invalid=0 send_seq=255168 receive_seq=255168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003536 heater_bed: target=0 temp=90.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.37 cputime=6631.156 memavail=3612764 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.480 | |
| Stats 616556.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854069 bytes_read=7234993 bytes_retransmit=9 bytes_invalid=0 send_seq=255181 receive_seq=255181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003596 heater_bed: target=0 temp=90.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.42 cputime=6631.203 memavail=3612908 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.480 | |
| Stats 616557.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854259 bytes_read=7235497 bytes_retransmit=9 bytes_invalid=0 send_seq=255195 receive_seq=255195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003535 heater_bed: target=0 temp=90.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.42 cputime=6631.251 memavail=3612772 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.479 | |
| Stats 616558.1: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854433 bytes_read=7235980 bytes_retransmit=9 bytes_invalid=0 send_seq=255208 receive_seq=255208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003509 heater_bed: target=0 temp=90.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.42 cputime=6631.300 memavail=3612884 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.479 | |
| Stats 616559.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854607 bytes_read=7236454 bytes_retransmit=9 bytes_invalid=0 send_seq=255221 receive_seq=255221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003585 heater_bed: target=0 temp=90.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.42 cputime=6631.351 memavail=3612748 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.479 | |
| Stats 616560.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854781 bytes_read=7236956 bytes_retransmit=9 bytes_invalid=0 send_seq=255234 receive_seq=255234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003598 heater_bed: target=0 temp=90.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.42 cputime=6631.399 memavail=3612820 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.479 | |
| Stats 616561.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6854971 bytes_read=7237444 bytes_retransmit=9 bytes_invalid=0 send_seq=255248 receive_seq=255248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003597 heater_bed: target=0 temp=90.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.31 cputime=6631.446 memavail=3612908 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.467 | |
| Stats 616562.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6855145 bytes_read=7237928 bytes_retransmit=9 bytes_invalid=0 send_seq=255261 receive_seq=255261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003550 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.31 cputime=6631.495 memavail=3612748 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.467 | |
| Stats 616563.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6855319 bytes_read=7238427 bytes_retransmit=9 bytes_invalid=0 send_seq=255274 receive_seq=255274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003532 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.31 cputime=6631.541 memavail=3612932 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.467 | |
| Stats 616564.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6855493 bytes_read=7238910 bytes_retransmit=9 bytes_invalid=0 send_seq=255287 receive_seq=255287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003545 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.31 cputime=6631.592 memavail=3612892 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.467 | |
| Stats 616565.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6855667 bytes_read=7239409 bytes_retransmit=9 bytes_invalid=0 send_seq=255300 receive_seq=255300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003481 heater_bed: target=0 temp=90.4 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.31 cputime=6631.642 memavail=3612852 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.467 | |
| Stats 616566.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6855857 bytes_read=7239913 bytes_retransmit=9 bytes_invalid=0 send_seq=255314 receive_seq=255314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003538 heater_bed: target=0 temp=90.4 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.20 cputime=6631.688 memavail=3612804 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.484 | |
| Stats 616567.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856031 bytes_read=7240396 bytes_retransmit=9 bytes_invalid=0 send_seq=255327 receive_seq=255327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003563 heater_bed: target=0 temp=90.4 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.20 cputime=6631.736 memavail=3612720 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.484 | |
| Stats 616568.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856205 bytes_read=7240880 bytes_retransmit=9 bytes_invalid=0 send_seq=255340 receive_seq=255340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003606 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.20 cputime=6631.782 memavail=3612896 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.484 | |
| Stats 616569.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856379 bytes_read=7241379 bytes_retransmit=9 bytes_invalid=0 send_seq=255353 receive_seq=255353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003623 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.20 cputime=6631.829 memavail=3612828 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.484 | |
| Stats 616570.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856569 bytes_read=7241882 bytes_retransmit=9 bytes_invalid=0 send_seq=255367 receive_seq=255367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003685 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.20 cputime=6631.879 memavail=3612964 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.491 | |
| Stats 616571.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856743 bytes_read=7242366 bytes_retransmit=9 bytes_invalid=0 send_seq=255380 receive_seq=255380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003713 heater_bed: target=0 temp=90.2 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.19 cputime=6631.929 memavail=3613028 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.491 | |
| Stats 616572.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6856917 bytes_read=7242865 bytes_retransmit=9 bytes_invalid=0 send_seq=255393 receive_seq=255393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003743 heater_bed: target=0 temp=90.2 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.19 cputime=6631.975 memavail=3612908 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.491 | |
| Stats 616573.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857091 bytes_read=7243348 bytes_retransmit=9 bytes_invalid=0 send_seq=255406 receive_seq=255406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003800 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.19 cputime=6632.021 memavail=3612900 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.491 | |
| Stats 616574.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857281 bytes_read=7243837 bytes_retransmit=9 bytes_invalid=0 send_seq=255420 receive_seq=255420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003846 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.19 cputime=6632.069 memavail=3612924 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.489 | |
| Stats 616575.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857455 bytes_read=7244351 bytes_retransmit=9 bytes_invalid=0 send_seq=255433 receive_seq=255433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003918 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.19 cputime=6632.116 memavail=3612924 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.489 | |
| Stats 616576.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857629 bytes_read=7244834 bytes_retransmit=9 bytes_invalid=0 send_seq=255446 receive_seq=255446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003954 heater_bed: target=0 temp=90.0 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.17 cputime=6632.166 memavail=3612924 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.489 | |
| Stats 616577.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857803 bytes_read=7245318 bytes_retransmit=9 bytes_invalid=0 send_seq=255459 receive_seq=255459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003986 heater_bed: target=0 temp=90.0 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.17 cputime=6632.217 memavail=3612884 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.489 | |
| Stats 616578.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6857993 bytes_read=7245822 bytes_retransmit=9 bytes_invalid=0 send_seq=255473 receive_seq=255473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004042 heater_bed: target=0 temp=89.9 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.17 cputime=6632.266 memavail=3613040 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.487 | |
| Stats 616579.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6858167 bytes_read=7246305 bytes_retransmit=9 bytes_invalid=0 send_seq=255486 receive_seq=255486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004026 heater_bed: target=0 temp=89.9 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.17 cputime=6632.312 memavail=3612936 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.487 | |
| Stats 616580.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6858341 bytes_read=7246804 bytes_retransmit=9 bytes_invalid=0 send_seq=255499 receive_seq=255499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004016 heater_bed: target=0 temp=89.9 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.17 cputime=6632.362 memavail=3612928 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.487 | |
| Stats 616581.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6858515 bytes_read=7247303 bytes_retransmit=9 bytes_invalid=0 send_seq=255512 receive_seq=255512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004022 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.08 cputime=6632.410 memavail=3612888 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.487 | |
| Stats 616582.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6858705 bytes_read=7247791 bytes_retransmit=9 bytes_invalid=0 send_seq=255526 receive_seq=255526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003991 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.08 cputime=6632.462 memavail=3612872 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.487 | |
| Stats 616583.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6858879 bytes_read=7248264 bytes_retransmit=9 bytes_invalid=0 send_seq=255539 receive_seq=255539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003971 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.08 cputime=6632.514 memavail=3612928 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.487 | |
| Stats 616584.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859053 bytes_read=7248781 bytes_retransmit=9 bytes_invalid=0 send_seq=255552 receive_seq=255552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003982 heater_bed: target=0 temp=89.7 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.08 cputime=6632.563 memavail=3612832 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.487 | |
| Stats 616585.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859227 bytes_read=7249250 bytes_retransmit=9 bytes_invalid=0 send_seq=255565 receive_seq=255565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004021 heater_bed: target=0 temp=89.7 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.08 cputime=6632.609 memavail=3612960 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.487 | |
| Stats 616586.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859401 bytes_read=7249734 bytes_retransmit=9 bytes_invalid=0 send_seq=255578 receive_seq=255578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004048 heater_bed: target=0 temp=89.6 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.07 cputime=6632.657 memavail=3612928 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.487 | |
| Stats 616587.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859591 bytes_read=7250252 bytes_retransmit=9 bytes_invalid=0 send_seq=255592 receive_seq=255592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004104 heater_bed: target=0 temp=89.6 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.07 cputime=6632.707 memavail=3612960 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.477 | |
| Stats 616588.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859765 bytes_read=7250721 bytes_retransmit=9 bytes_invalid=0 send_seq=255605 receive_seq=255605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004097 heater_bed: target=0 temp=89.5 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.07 cputime=6632.754 memavail=3612944 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.477 | |
| Stats 616589.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6859939 bytes_read=7251205 bytes_retransmit=9 bytes_invalid=0 send_seq=255618 receive_seq=255618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=89.4 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.07 cputime=6632.804 memavail=3612916 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.477 | |
| Stats 616590.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6860113 bytes_read=7251733 bytes_retransmit=9 bytes_invalid=0 send_seq=255631 receive_seq=255631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004135 heater_bed: target=0 temp=89.4 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=2.07 cputime=6632.851 memavail=3613020 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.477 | |
| Stats 616591.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6860298 bytes_read=7252202 bytes_retransmit=9 bytes_invalid=0 send_seq=255644 receive_seq=255644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004009 heater_bed: target=0 temp=89.3 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=1.99 cputime=6632.897 memavail=3612980 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.464 | |
| Stats 616592.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6860472 bytes_read=7252686 bytes_retransmit=9 bytes_invalid=0 send_seq=255657 receive_seq=255657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=89.3 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=1.99 cputime=6632.945 memavail=3612964 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.464 | |
| Stats 616593.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6860646 bytes_read=7253199 bytes_retransmit=9 bytes_invalid=0 send_seq=255670 receive_seq=255670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003975 heater_bed: target=0 temp=89.2 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.99 cputime=6632.993 memavail=3612924 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.464 | |
| Stats 616594.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6860820 bytes_read=7253668 bytes_retransmit=9 bytes_invalid=0 send_seq=255683 receive_seq=255683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003946 heater_bed: target=0 temp=89.2 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.99 cputime=6633.041 memavail=3612980 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.5 pwm=0.464 | |
| Stats 616595.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861010 bytes_read=7254187 bytes_retransmit=9 bytes_invalid=0 send_seq=255697 receive_seq=255697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003918 heater_bed: target=0 temp=89.1 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.99 cputime=6633.091 memavail=3613068 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.459 | |
| Stats 616596.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861184 bytes_read=7254685 bytes_retransmit=9 bytes_invalid=0 send_seq=255710 receive_seq=255710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=89.1 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.138 memavail=3612956 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.459 | |
| Stats 616597.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861358 bytes_read=7255154 bytes_retransmit=9 bytes_invalid=0 send_seq=255723 receive_seq=255723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003874 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.186 memavail=3612956 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.459 | |
| Stats 616598.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861532 bytes_read=7255653 bytes_retransmit=9 bytes_invalid=0 send_seq=255736 receive_seq=255736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003770 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.235 memavail=3612948 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.459 | |
| Stats 616599.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861722 bytes_read=7256156 bytes_retransmit=9 bytes_invalid=0 send_seq=255750 receive_seq=255750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003703 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.284 memavail=3613092 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.478 | |
| Stats 616600.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6861896 bytes_read=7256640 bytes_retransmit=9 bytes_invalid=0 send_seq=255763 receive_seq=255763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003626 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.332 memavail=3612988 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.478 | |
| Stats 616601.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862070 bytes_read=7257139 bytes_retransmit=9 bytes_invalid=0 send_seq=255776 receive_seq=255776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003561 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.382 memavail=3612836 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.478 | |
| Stats 616602.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862244 bytes_read=7257637 bytes_retransmit=9 bytes_invalid=0 send_seq=255789 receive_seq=255789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003515 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.91 cputime=6633.430 memavail=3613012 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.478 | |
| Stats 616603.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862434 bytes_read=7258111 bytes_retransmit=9 bytes_invalid=0 send_seq=255803 receive_seq=255803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003443 heater_bed: target=0 temp=88.8 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.91 cputime=6633.477 memavail=3613016 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.492 | |
| Stats 616604.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862608 bytes_read=7258640 bytes_retransmit=9 bytes_invalid=0 send_seq=255816 receive_seq=255816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003490 heater_bed: target=0 temp=88.8 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.91 cputime=6633.525 memavail=3613016 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.492 | |
| Stats 616605.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862782 bytes_read=7259123 bytes_retransmit=9 bytes_invalid=0 send_seq=255829 receive_seq=255829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003414 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.91 cputime=6633.572 memavail=3612976 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.492 | |
| Stats 616606.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6862956 bytes_read=7259592 bytes_retransmit=9 bytes_invalid=0 send_seq=255842 receive_seq=255842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003352 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.92 cputime=6633.620 memavail=3613000 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.492 | |
| Stats 616607.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6863130 bytes_read=7260090 bytes_retransmit=9 bytes_invalid=0 send_seq=255855 receive_seq=255855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003301 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.92 cputime=6633.669 memavail=3612960 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.492 | |
| Stats 616608.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6863315 bytes_read=7260567 bytes_retransmit=9 bytes_invalid=0 send_seq=255868 receive_seq=255868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003323 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.92 cputime=6633.717 memavail=3612984 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.492 | |
| Stats 616609.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6863489 bytes_read=7261036 bytes_retransmit=9 bytes_invalid=0 send_seq=255881 receive_seq=255881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003338 heater_bed: target=0 temp=88.6 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.92 cputime=6633.763 memavail=3612972 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.8 pwm=0.492 | |
| Stats 616610.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6863663 bytes_read=7261565 bytes_retransmit=9 bytes_invalid=0 send_seq=255894 receive_seq=255894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003367 heater_bed: target=0 temp=88.6 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.92 cputime=6633.812 memavail=3612916 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.492 | |
| Stats 616611.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6863837 bytes_read=7262048 bytes_retransmit=9 bytes_invalid=0 send_seq=255907 receive_seq=255907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003356 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.85 cputime=6633.859 memavail=3612996 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.492 | |
| Stats 616612.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864022 bytes_read=7262517 bytes_retransmit=9 bytes_invalid=0 send_seq=255920 receive_seq=255920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003362 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.85 cputime=6633.908 memavail=3612996 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.491 | |
| Stats 616613.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864196 bytes_read=7263031 bytes_retransmit=9 bytes_invalid=0 send_seq=255933 receive_seq=255933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003391 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.85 cputime=6633.958 memavail=3613044 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.491 | |
| Stats 616614.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864370 bytes_read=7263514 bytes_retransmit=9 bytes_invalid=0 send_seq=255946 receive_seq=255946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003414 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.85 cputime=6634.005 memavail=3612972 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.8 pwm=0.491 | |
| Stats 616615.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864544 bytes_read=7263998 bytes_retransmit=9 bytes_invalid=0 send_seq=255959 receive_seq=255959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003488 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.85 cputime=6634.050 memavail=3613004 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.491 | |
| Stats 616616.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864740 bytes_read=7264533 bytes_retransmit=9 bytes_invalid=0 send_seq=255974 receive_seq=255974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003532 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.78 cputime=6634.099 memavail=3613028 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.473 | |
| Stats 616617.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6864914 bytes_read=7265016 bytes_retransmit=9 bytes_invalid=0 send_seq=255987 receive_seq=255987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003547 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.78 cputime=6634.147 memavail=3612988 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.473 | |
| Stats 616618.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865088 bytes_read=7265485 bytes_retransmit=9 bytes_invalid=0 send_seq=256000 receive_seq=256000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003551 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.78 cputime=6634.194 memavail=3612968 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.473 | |
| Stats 616619.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865262 bytes_read=7265999 bytes_retransmit=9 bytes_invalid=0 send_seq=256013 receive_seq=256013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003558 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.78 cputime=6634.244 memavail=3612980 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.473 | |
| Stats 616620.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865452 bytes_read=7266502 bytes_retransmit=9 bytes_invalid=0 send_seq=256027 receive_seq=256027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003610 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.78 cputime=6634.299 memavail=3613216 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.486 | |
| Stats 616621.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865626 bytes_read=7266971 bytes_retransmit=9 bytes_invalid=0 send_seq=256040 receive_seq=256040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003590 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.72 cputime=6634.349 memavail=3613160 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.486 | |
| Stats 616622.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865800 bytes_read=7267485 bytes_retransmit=9 bytes_invalid=0 send_seq=256053 receive_seq=256053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003540 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.72 cputime=6634.400 memavail=3613200 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.486 | |
| Stats 616623.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6865974 bytes_read=7267968 bytes_retransmit=9 bytes_invalid=0 send_seq=256066 receive_seq=256066 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003575 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.72 cputime=6634.449 memavail=3613112 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.486 | |
| Stats 616624.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6866164 bytes_read=7268442 bytes_retransmit=9 bytes_invalid=0 send_seq=256080 receive_seq=256080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.72 cputime=6634.499 memavail=3613160 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.482 | |
| Stats 616625.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6866338 bytes_read=7268971 bytes_retransmit=9 bytes_invalid=0 send_seq=256093 receive_seq=256093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003527 heater_bed: target=0 temp=88.1 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.72 cputime=6634.550 memavail=3613144 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.482 | |
| Stats 616626.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6866512 bytes_read=7269454 bytes_retransmit=9 bytes_invalid=0 send_seq=256106 receive_seq=256106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003612 heater_bed: target=0 temp=88.1 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.66 cputime=6634.598 memavail=3613216 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.482 | |
| Stats 616627.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6866686 bytes_read=7269923 bytes_retransmit=9 bytes_invalid=0 send_seq=256119 receive_seq=256119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003624 heater_bed: target=0 temp=88.0 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.66 cputime=6634.648 memavail=3613216 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.482 | |
| Stats 616628.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6866860 bytes_read=7270437 bytes_retransmit=9 bytes_invalid=0 send_seq=256132 receive_seq=256132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003654 heater_bed: target=0 temp=88.0 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.3 pwm=0.000 sysload=1.66 cputime=6634.698 memavail=3613088 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.482 | |
| Stats 616629.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867050 bytes_read=7270925 bytes_retransmit=9 bytes_invalid=0 send_seq=256146 receive_seq=256146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003630 heater_bed: target=0 temp=87.9 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.66 cputime=6634.747 memavail=3613120 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.464 | |
| Stats 616630.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867224 bytes_read=7271408 bytes_retransmit=9 bytes_invalid=0 send_seq=256159 receive_seq=256159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003678 heater_bed: target=0 temp=87.9 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.66 cputime=6634.794 memavail=3613200 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.464 | |
| Stats 616631.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867398 bytes_read=7271906 bytes_retransmit=9 bytes_invalid=0 send_seq=256172 receive_seq=256172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003606 heater_bed: target=0 temp=87.8 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.69 cputime=6634.844 memavail=3613096 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.464 | |
| Stats 616632.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867572 bytes_read=7272385 bytes_retransmit=9 bytes_invalid=0 send_seq=256185 receive_seq=256185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003667 heater_bed: target=0 temp=87.8 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.69 cputime=6634.892 memavail=3613112 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.4 pwm=0.464 | |
| Stats 616633.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867757 bytes_read=7272854 bytes_retransmit=9 bytes_invalid=0 send_seq=256198 receive_seq=256198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003748 heater_bed: target=0 temp=87.7 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=1.69 cputime=6634.939 memavail=3613068 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.6 pwm=0.453 | |
| Stats 616634.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6867931 bytes_read=7273368 bytes_retransmit=9 bytes_invalid=0 send_seq=256211 receive_seq=256211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003684 heater_bed: target=0 temp=87.7 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.69 cputime=6634.988 memavail=3613220 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.453 | |
| Stats 616635.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868105 bytes_read=7273866 bytes_retransmit=9 bytes_invalid=0 send_seq=256224 receive_seq=256224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003732 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.69 cputime=6635.036 memavail=3613292 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.453 | |
| Stats 616636.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868279 bytes_read=7274335 bytes_retransmit=9 bytes_invalid=0 send_seq=256237 receive_seq=256237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003755 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=1.71 cputime=6635.083 memavail=3613148 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.453 | |
| Stats 616637.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868469 bytes_read=7274854 bytes_retransmit=9 bytes_invalid=0 send_seq=256251 receive_seq=256251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003720 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.71 cputime=6635.134 memavail=3613196 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.481 | |
| Stats 616638.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868643 bytes_read=7275337 bytes_retransmit=9 bytes_invalid=0 send_seq=256264 receive_seq=256264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003771 heater_bed: target=0 temp=87.5 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=1.71 cputime=6635.183 memavail=3613212 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.481 | |
| Stats 616639.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868817 bytes_read=7275806 bytes_retransmit=9 bytes_invalid=0 send_seq=256277 receive_seq=256277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003840 heater_bed: target=0 temp=87.5 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=1.71 cputime=6635.229 memavail=3613128 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.481 | |
| Stats 616640.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6868991 bytes_read=7276335 bytes_retransmit=9 bytes_invalid=0 send_seq=256290 receive_seq=256290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 heater_bed: target=0 temp=87.4 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=1.71 cputime=6635.277 memavail=3613152 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.481 | |
| Stats 616641.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6869181 bytes_read=7276823 bytes_retransmit=9 bytes_invalid=0 send_seq=256304 receive_seq=256304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=87.4 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=1.65 cputime=6635.323 memavail=3613104 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.483 | |
| Stats 616642.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6869355 bytes_read=7277292 bytes_retransmit=9 bytes_invalid=0 send_seq=256317 receive_seq=256317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003803 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=1.65 cputime=6635.370 memavail=3613304 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.483 | |
| Stats 616643.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6869529 bytes_read=7277806 bytes_retransmit=9 bytes_invalid=0 send_seq=256330 receive_seq=256330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003698 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=1.65 cputime=6635.418 memavail=3613040 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.3 pwm=0.483 | |
| Stats 616644.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6869703 bytes_read=7278289 bytes_retransmit=9 bytes_invalid=0 send_seq=256343 receive_seq=256343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003612 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=1.65 cputime=6635.465 memavail=3613104 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.483 | |
| Stats 616645.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6869893 bytes_read=7278778 bytes_retransmit=9 bytes_invalid=0 send_seq=256357 receive_seq=256357 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003552 heater_bed: target=0 temp=87.2 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=1.65 cputime=6635.513 memavail=3613108 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.486 | |
| Stats 616646.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870067 bytes_read=7279292 bytes_retransmit=9 bytes_invalid=0 send_seq=256370 receive_seq=256370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003497 heater_bed: target=0 temp=87.2 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=1.60 cputime=6635.561 memavail=3613096 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.486 | |
| Stats 616647.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870241 bytes_read=7279775 bytes_retransmit=9 bytes_invalid=0 send_seq=256383 receive_seq=256383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003419 heater_bed: target=0 temp=87.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=1.60 cputime=6635.608 memavail=3613192 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.486 | |
| Stats 616648.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870415 bytes_read=7280244 bytes_retransmit=9 bytes_invalid=0 send_seq=256396 receive_seq=256396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003513 heater_bed: target=0 temp=87.1 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=1.60 cputime=6635.655 memavail=3613280 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.486 | |
| Stats 616649.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870589 bytes_read=7280758 bytes_retransmit=9 bytes_invalid=0 send_seq=256409 receive_seq=256409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003617 heater_bed: target=0 temp=87.0 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=1.60 cputime=6635.704 memavail=3613052 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.486 | |
| Stats 616650.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870779 bytes_read=7281261 bytes_retransmit=9 bytes_invalid=0 send_seq=256423 receive_seq=256423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003553 heater_bed: target=0 temp=87.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=1.60 cputime=6635.751 memavail=3613004 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.484 | |
| Stats 616651.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6870953 bytes_read=7281730 bytes_retransmit=9 bytes_invalid=0 send_seq=256436 receive_seq=256436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003620 heater_bed: target=0 temp=86.9 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=1.55 cputime=6635.797 memavail=3613056 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.484 | |
| Stats 616652.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6871127 bytes_read=7282244 bytes_retransmit=9 bytes_invalid=0 send_seq=256449 receive_seq=256449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003617 heater_bed: target=0 temp=86.9 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=52.1 pwm=0.000 sysload=1.55 cputime=6635.845 memavail=3613056 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.484 | |
| Stats 616653.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6871301 bytes_read=7282727 bytes_retransmit=9 bytes_invalid=0 send_seq=256462 receive_seq=256462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=1.55 cputime=6635.888 memavail=3612904 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.484 | |
| Stats 616654.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6871491 bytes_read=7283197 bytes_retransmit=9 bytes_invalid=0 send_seq=256476 receive_seq=256476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003667 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=1.55 cputime=6635.936 memavail=3613000 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.472 | |
| Stats 616655.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6871665 bytes_read=7283710 bytes_retransmit=9 bytes_invalid=0 send_seq=256489 receive_seq=256489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003636 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=51.9 pwm=0.000 sysload=1.55 cputime=6635.984 memavail=3613096 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.472 | |
| Stats 616656.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6871839 bytes_read=7284191 bytes_retransmit=9 bytes_invalid=0 send_seq=256502 receive_seq=256502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003679 heater_bed: target=0 temp=86.7 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=51.8 pwm=0.000 sysload=1.59 cputime=6636.032 memavail=3612888 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.472 | |
| Stats 616657.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872013 bytes_read=7284660 bytes_retransmit=9 bytes_invalid=0 send_seq=256515 receive_seq=256515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003734 heater_bed: target=0 temp=86.7 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=51.8 pwm=0.000 sysload=1.59 cputime=6636.078 memavail=3613024 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.472 | |
| Stats 616658.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872198 bytes_read=7285174 bytes_retransmit=9 bytes_invalid=0 send_seq=256528 receive_seq=256528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003789 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=51.7 pwm=0.000 sysload=1.59 cputime=6636.125 memavail=3613056 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.456 | |
| Stats 616659.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872372 bytes_read=7285657 bytes_retransmit=9 bytes_invalid=0 send_seq=256541 receive_seq=256541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003733 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=51.6 pwm=0.000 sysload=1.59 cputime=6636.173 memavail=3613008 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.456 | |
| Stats 616660.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872546 bytes_read=7286141 bytes_retransmit=9 bytes_invalid=0 send_seq=256554 receive_seq=256554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003767 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=51.5 pwm=0.000 sysload=1.59 cputime=6636.220 memavail=3613008 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.456 | |
| Stats 616661.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872720 bytes_read=7286655 bytes_retransmit=9 bytes_invalid=0 send_seq=256567 receive_seq=256567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003756 heater_bed: target=0 temp=86.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=51.5 pwm=0.000 sysload=1.54 cputime=6636.269 memavail=3613064 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.456 | |
| Stats 616662.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6872910 bytes_read=7287143 bytes_retransmit=9 bytes_invalid=0 send_seq=256581 receive_seq=256581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 heater_bed: target=0 temp=86.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=51.4 pwm=0.000 sysload=1.54 cputime=6636.317 memavail=3613088 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.485 | |
| Stats 616663.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873084 bytes_read=7287612 bytes_retransmit=9 bytes_invalid=0 send_seq=256594 receive_seq=256594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 heater_bed: target=0 temp=86.4 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=51.4 pwm=0.000 sysload=1.54 cputime=6636.363 memavail=3613160 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.2 pwm=0.485 | |
| Stats 616664.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873258 bytes_read=7288126 bytes_retransmit=9 bytes_invalid=0 send_seq=256607 receive_seq=256607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003932 heater_bed: target=0 temp=86.4 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=51.3 pwm=0.000 sysload=1.54 cputime=6636.411 memavail=3613040 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.485 | |
| Stats 616665.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873432 bytes_read=7288624 bytes_retransmit=9 bytes_invalid=0 send_seq=256620 receive_seq=256620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003929 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=51.2 pwm=0.000 sysload=1.54 cputime=6636.458 memavail=3613064 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.485 | |
| Stats 616666.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873622 bytes_read=7289098 bytes_retransmit=9 bytes_invalid=0 send_seq=256634 receive_seq=256634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003917 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=51.1 pwm=0.000 sysload=1.58 cputime=6636.505 memavail=3613072 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.486 | |
| Stats 616667.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873796 bytes_read=7289612 bytes_retransmit=9 bytes_invalid=0 send_seq=256647 receive_seq=256647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003995 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=51.1 pwm=0.000 sysload=1.58 cputime=6636.554 memavail=3613184 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.486 | |
| Stats 616668.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6873970 bytes_read=7290095 bytes_retransmit=9 bytes_invalid=0 send_seq=256660 receive_seq=256660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003982 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=51.0 pwm=0.000 sysload=1.58 cputime=6636.600 memavail=3613120 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.1 pwm=0.486 | |
| Stats 616669.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6874144 bytes_read=7290579 bytes_retransmit=9 bytes_invalid=0 send_seq=256673 receive_seq=256673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003923 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=50.9 pwm=0.000 sysload=1.58 cputime=6636.647 memavail=3613104 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.486 | |
| Stats 616670.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6874318 bytes_read=7291093 bytes_retransmit=9 bytes_invalid=0 send_seq=256686 receive_seq=256686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003886 heater_bed: target=0 temp=86.1 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=50.9 pwm=0.000 sysload=1.58 cputime=6636.696 memavail=3613064 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.486 | |
| Stats 616671.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6874508 bytes_read=7291581 bytes_retransmit=9 bytes_invalid=0 send_seq=256700 receive_seq=256700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003802 heater_bed: target=0 temp=86.1 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=50.8 pwm=0.000 sysload=1.53 cputime=6636.744 memavail=3613032 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=250.0 pwm=0.478 | |
| Stats 616672.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6874682 bytes_read=7292065 bytes_retransmit=9 bytes_invalid=0 send_seq=256713 receive_seq=256713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003758 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=50.8 pwm=0.000 sysload=1.53 cputime=6636.792 memavail=3613000 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.478 | |
| Stats 616673.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6874856 bytes_read=7292564 bytes_retransmit=9 bytes_invalid=0 send_seq=256726 receive_seq=256726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003805 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=50.7 pwm=0.000 sysload=1.53 cputime=6636.840 memavail=3613068 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.5 pwm=0.478 | |
| Stats 616674.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875030 bytes_read=7293047 bytes_retransmit=9 bytes_invalid=0 send_seq=256739 receive_seq=256739 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003755 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.53 cputime=6636.887 memavail=3613068 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.478 | |
| Stats 616675.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875220 bytes_read=7293551 bytes_retransmit=9 bytes_invalid=0 send_seq=256753 receive_seq=256753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 heater_bed: target=0 temp=85.9 pwm=0.000 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.53 cputime=6636.935 memavail=3613028 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.7 pwm=0.481 | |
| Stats 616676.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875394 bytes_read=7294050 bytes_retransmit=9 bytes_invalid=0 send_seq=256766 receive_seq=256766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003892 heater_bed: target=0 temp=85.9 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.49 cputime=6636.983 memavail=3613020 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.6 pwm=0.481 | |
| Stats 616677.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875574 bytes_read=7294549 bytes_retransmit=9 bytes_invalid=0 send_seq=256780 receive_seq=256780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003779 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.49 cputime=6637.032 memavail=3612996 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.6 pwm=0.481 | |
| Stats 616678.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875748 bytes_read=7295027 bytes_retransmit=9 bytes_invalid=0 send_seq=256793 receive_seq=256793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003789 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.49 cputime=6637.079 memavail=3613228 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.8 pwm=0.481 | |
| Stats 616679.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6875933 bytes_read=7295511 bytes_retransmit=9 bytes_invalid=0 send_seq=256806 receive_seq=256806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003731 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.49 cputime=6637.128 memavail=3613100 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.9 pwm=0.470 | |
| Stats 616680.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876107 bytes_read=7296008 bytes_retransmit=9 bytes_invalid=0 send_seq=256819 receive_seq=256819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003735 heater_bed: target=0 temp=85.7 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.49 cputime=6637.175 memavail=3612996 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.7 pwm=0.470 | |
| Stats 616681.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876281 bytes_read=7296492 bytes_retransmit=9 bytes_invalid=0 send_seq=256832 receive_seq=256832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003745 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=1.45 cputime=6637.221 memavail=3613172 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.6 pwm=0.470 | |
| Stats 616682.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876455 bytes_read=7296991 bytes_retransmit=9 bytes_invalid=0 send_seq=256845 receive_seq=256845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003653 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.45 cputime=6637.271 memavail=3613100 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.3 pwm=0.470 | |
| Stats 616683.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876640 bytes_read=7297474 bytes_retransmit=9 bytes_invalid=0 send_seq=256858 receive_seq=256858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003564 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.45 cputime=6637.319 memavail=3613052 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.8 pwm=0.534 | |
| Stats 616684.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876814 bytes_read=7297958 bytes_retransmit=9 bytes_invalid=0 send_seq=256871 receive_seq=256871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 heater_bed: target=0 temp=85.5 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.45 cputime=6637.366 memavail=3613092 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.7 pwm=0.534 | |
| Stats 616685.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6876988 bytes_read=7298472 bytes_retransmit=9 bytes_invalid=0 send_seq=256884 receive_seq=256884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003604 heater_bed: target=0 temp=85.5 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.45 cputime=6637.415 memavail=3613044 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.6 pwm=0.534 | |
| Stats 616686.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6877162 bytes_read=7298955 bytes_retransmit=9 bytes_invalid=0 send_seq=256897 receive_seq=256897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003564 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.41 cputime=6637.462 memavail=3613084 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.2 pwm=0.534 | |
| Stats 616687.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6877352 bytes_read=7299444 bytes_retransmit=9 bytes_invalid=0 send_seq=256911 receive_seq=256911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003545 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.41 cputime=6637.510 memavail=3613048 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.3 pwm=0.556 | |
| Stats 616688.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6877526 bytes_read=7299943 bytes_retransmit=9 bytes_invalid=0 send_seq=256924 receive_seq=256924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003513 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.41 cputime=6637.558 memavail=3613096 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.1 pwm=0.556 | |
| Stats 616689.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6877700 bytes_read=7300426 bytes_retransmit=9 bytes_invalid=0 send_seq=256937 receive_seq=256937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003503 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=49.8 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.41 cputime=6637.605 memavail=3613080 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.6 pwm=0.556 | |
| Stats 616690.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6877874 bytes_read=7300925 bytes_retransmit=9 bytes_invalid=0 send_seq=256950 receive_seq=256950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003442 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=49.7 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.41 cputime=6637.654 memavail=3613136 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.6 pwm=0.556 | |
| Stats 616691.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878059 bytes_read=7301424 bytes_retransmit=9 bytes_invalid=0 send_seq=256963 receive_seq=256963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003416 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=49.7 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.38 cputime=6637.705 memavail=3613196 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.9 pwm=0.550 | |
| Stats 616692.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878233 bytes_read=7301907 bytes_retransmit=9 bytes_invalid=0 send_seq=256976 receive_seq=256976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003430 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=49.6 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=1.38 cputime=6637.753 memavail=3613172 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.6 pwm=0.550 | |
| Stats 616693.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878407 bytes_read=7302391 bytes_retransmit=9 bytes_invalid=0 send_seq=256989 receive_seq=256989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003435 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=49.6 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.38 cputime=6637.800 memavail=3613044 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.0 pwm=0.550 | |
| Stats 616694.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878581 bytes_read=7302890 bytes_retransmit=9 bytes_invalid=0 send_seq=257002 receive_seq=257002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003456 heater_bed: target=0 temp=85.1 pwm=0.000 z_thermal_adjust: temp=49.5 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.38 cputime=6637.848 memavail=3613212 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=247.9 pwm=0.550 | |
| Stats 616695.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878771 bytes_read=7303393 bytes_retransmit=9 bytes_invalid=0 send_seq=257016 receive_seq=257016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003377 heater_bed: target=0 temp=85.1 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=1.38 cputime=6637.895 memavail=3613004 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.0 pwm=0.534 | |
| Stats 616696.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6878945 bytes_read=7303877 bytes_retransmit=9 bytes_invalid=0 send_seq=257029 receive_seq=257029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003421 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=1.35 cputime=6637.944 memavail=3613188 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.2 pwm=0.534 | |
| Stats 616697.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6879119 bytes_read=7304376 bytes_retransmit=9 bytes_invalid=0 send_seq=257042 receive_seq=257042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003474 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=1.35 cputime=6637.993 memavail=3613044 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.2 pwm=0.534 | |
| Stats 616698.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6879293 bytes_read=7304859 bytes_retransmit=9 bytes_invalid=0 send_seq=257055 receive_seq=257055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003458 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=49.2 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=1.35 cputime=6638.041 memavail=3613060 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.4 pwm=0.534 | |
| Stats 616699.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6879483 bytes_read=7305348 bytes_retransmit=9 bytes_invalid=0 send_seq=257069 receive_seq=257069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003558 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=49.2 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=1.35 cputime=6638.090 memavail=3613136 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.5 pwm=0.489 | |
| Stats 616700.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6879657 bytes_read=7305862 bytes_retransmit=9 bytes_invalid=0 send_seq=257082 receive_seq=257082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003563 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=49.1 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=1.35 cputime=6638.139 memavail=3613064 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.7 pwm=0.489 | |
| Stats 616701.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6879831 bytes_read=7306345 bytes_retransmit=9 bytes_invalid=0 send_seq=257095 receive_seq=257095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003517 heater_bed: target=0 temp=84.8 pwm=0.000 z_thermal_adjust: temp=49.1 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.32 cputime=6638.186 memavail=3613024 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.9 pwm=0.489 | |
| Stats 616702.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880005 bytes_read=7306821 bytes_retransmit=9 bytes_invalid=0 send_seq=257108 receive_seq=257108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003495 heater_bed: target=0 temp=84.8 pwm=0.000 z_thermal_adjust: temp=49.0 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.32 cputime=6638.236 memavail=3613144 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=248.9 pwm=0.489 | |
| Stats 616703.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880179 bytes_read=7307322 bytes_retransmit=9 bytes_invalid=0 send_seq=257121 receive_seq=257121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003534 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=48.9 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.32 cputime=6638.286 memavail=3613072 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.1 pwm=0.480 | |
| Stats 616704.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880364 bytes_read=7307791 bytes_retransmit=9 bytes_invalid=0 send_seq=257134 receive_seq=257134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003597 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=48.9 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.32 cputime=6638.335 memavail=3613088 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.4 pwm=0.480 | |
| Stats 616705.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880538 bytes_read=7308290 bytes_retransmit=9 bytes_invalid=0 send_seq=257147 receive_seq=257147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003620 heater_bed: target=0 temp=84.6 pwm=0.000 z_thermal_adjust: temp=48.8 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.32 cputime=6638.385 memavail=3613012 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.5 pwm=0.480 | |
| Stats 616706.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880712 bytes_read=7308803 bytes_retransmit=9 bytes_invalid=0 send_seq=257160 receive_seq=257160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003679 heater_bed: target=0 temp=84.6 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.30 cputime=6638.436 memavail=3613108 print_time=13852.959 buffer_time=0.000 print_stall=5 extruder: target=250 temp=249.6 pwm=0.480 | |
| Stats 616707.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6880894 bytes_read=7309272 bytes_retransmit=9 bytes_invalid=0 send_seq=257173 receive_seq=257173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003742 heater_bed: target=0 temp=84.5 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.30 cputime=6638.486 memavail=3613032 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=249.5 pwm=0.000 | |
| Stats 616708.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881068 bytes_read=7309756 bytes_retransmit=9 bytes_invalid=0 send_seq=257186 receive_seq=257186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003775 heater_bed: target=0 temp=84.5 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.30 cputime=6638.535 memavail=3613056 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=249.5 pwm=0.000 | |
| Stats 616709.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881242 bytes_read=7310269 bytes_retransmit=9 bytes_invalid=0 send_seq=257199 receive_seq=257199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003786 heater_bed: target=0 temp=84.4 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.30 cputime=6638.586 memavail=3613136 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=249.5 pwm=0.000 | |
| Stats 616710.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881416 bytes_read=7310753 bytes_retransmit=9 bytes_invalid=0 send_seq=257212 receive_seq=257212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 heater_bed: target=0 temp=84.4 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.30 cputime=6638.634 memavail=3613164 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=249.5 pwm=0.000 | |
| Stats 616711.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881590 bytes_read=7311237 bytes_retransmit=9 bytes_invalid=0 send_seq=257225 receive_seq=257225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003719 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=48.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.35 cputime=6638.680 memavail=3613080 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=249.1 pwm=0.000 | |
| Stats 616712.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881764 bytes_read=7311750 bytes_retransmit=9 bytes_invalid=0 send_seq=257238 receive_seq=257238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003627 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=48.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=1.35 cputime=6638.729 memavail=3613080 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=248.8 pwm=0.000 | |
| Stats 616713.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6881938 bytes_read=7312219 bytes_retransmit=9 bytes_invalid=0 send_seq=257251 receive_seq=257251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003538 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=48.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=1.35 cputime=6638.776 memavail=3613160 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=248.3 pwm=0.000 | |
| Stats 616714.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882112 bytes_read=7312703 bytes_retransmit=9 bytes_invalid=0 send_seq=257264 receive_seq=257264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003455 heater_bed: target=0 temp=84.2 pwm=0.000 z_thermal_adjust: temp=48.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=1.35 cputime=6638.826 memavail=3613072 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=247.5 pwm=0.000 | |
| Stats 616715.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882286 bytes_read=7313231 bytes_retransmit=9 bytes_invalid=0 send_seq=257277 receive_seq=257277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003475 heater_bed: target=0 temp=84.2 pwm=0.000 z_thermal_adjust: temp=48.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=1.35 cputime=6638.875 memavail=3613224 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=246.9 pwm=0.000 | |
| Stats 616716.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882460 bytes_read=7313700 bytes_retransmit=9 bytes_invalid=0 send_seq=257290 receive_seq=257290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003540 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=49.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.32 cputime=6638.922 memavail=3613216 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=245.7 pwm=0.000 | |
| Stats 616717.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882634 bytes_read=7314184 bytes_retransmit=9 bytes_invalid=0 send_seq=257303 receive_seq=257303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003606 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=49.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.32 cputime=6638.970 memavail=3613064 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=244.7 pwm=0.000 | |
| Stats 616718.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882808 bytes_read=7314697 bytes_retransmit=9 bytes_invalid=0 send_seq=257316 receive_seq=257316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003654 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=49.1 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.32 cputime=6639.019 memavail=3613256 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=243.2 pwm=0.000 | |
| Stats 616719.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6882982 bytes_read=7315166 bytes_retransmit=9 bytes_invalid=0 send_seq=257329 receive_seq=257329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003611 heater_bed: target=0 temp=84.0 pwm=0.000 z_thermal_adjust: temp=49.1 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.32 cputime=6639.067 memavail=3612992 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=242.1 pwm=0.000 | |
| Stats 616720.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6883156 bytes_read=7315680 bytes_retransmit=9 bytes_invalid=0 send_seq=257342 receive_seq=257342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003525 heater_bed: target=0 temp=84.0 pwm=0.000 z_thermal_adjust: temp=49.2 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.32 cputime=6639.120 memavail=3613008 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=241.0 pwm=0.000 | |
| Stats 616721.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6883330 bytes_read=7316178 bytes_retransmit=9 bytes_invalid=0 send_seq=257355 receive_seq=257355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003609 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=49.2 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.30 cputime=6639.170 memavail=3613096 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=239.3 pwm=0.000 | |
| Stats 616722.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6883504 bytes_read=7316647 bytes_retransmit=9 bytes_invalid=0 send_seq=257368 receive_seq=257368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003546 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.30 cputime=6639.218 memavail=3613152 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=238.2 pwm=0.000 | |
| Stats 616723.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6883678 bytes_read=7317146 bytes_retransmit=9 bytes_invalid=0 send_seq=257381 receive_seq=257381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003517 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.30 cputime=6639.267 memavail=3612928 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=236.7 pwm=0.000 | |
| Stats 616724.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6883852 bytes_read=7317644 bytes_retransmit=9 bytes_invalid=0 send_seq=257394 receive_seq=257394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003532 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.30 cputime=6639.315 memavail=3613056 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=235.0 pwm=0.000 | |
| Stats 616725.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884026 bytes_read=7318128 bytes_retransmit=9 bytes_invalid=0 send_seq=257407 receive_seq=257407 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003453 heater_bed: target=0 temp=83.7 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.30 cputime=6639.364 memavail=3613088 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=233.5 pwm=0.000 | |
| Stats 616726.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884200 bytes_read=7318617 bytes_retransmit=9 bytes_invalid=0 send_seq=257420 receive_seq=257420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003384 heater_bed: target=0 temp=83.7 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.27 cputime=6639.413 memavail=3613208 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=232.2 pwm=0.000 | |
| Stats 616727.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884374 bytes_read=7319104 bytes_retransmit=9 bytes_invalid=0 send_seq=257433 receive_seq=257433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003341 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.27 cputime=6639.466 memavail=3613104 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=230.3 pwm=0.000 | |
| Stats 616728.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884548 bytes_read=7319573 bytes_retransmit=9 bytes_invalid=0 send_seq=257446 receive_seq=257446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003333 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.27 cputime=6639.515 memavail=3613104 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=229.0 pwm=0.000 | |
| Stats 616729.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884722 bytes_read=7320072 bytes_retransmit=9 bytes_invalid=0 send_seq=257459 receive_seq=257459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003370 heater_bed: target=0 temp=83.5 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.27 cputime=6639.566 memavail=3613132 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=227.4 pwm=0.000 | |
| Stats 616730.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6884896 bytes_read=7320585 bytes_retransmit=9 bytes_invalid=0 send_seq=257472 receive_seq=257472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003415 heater_bed: target=0 temp=83.5 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.27 cputime=6639.615 memavail=3612956 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=225.5 pwm=0.000 | |
| Stats 616731.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6885070 bytes_read=7321054 bytes_retransmit=9 bytes_invalid=0 send_seq=257485 receive_seq=257485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003427 heater_bed: target=0 temp=83.4 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.25 cputime=6639.664 memavail=3613100 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=224.0 pwm=0.000 | |
| Stats 616732.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6885244 bytes_read=7321553 bytes_retransmit=9 bytes_invalid=0 send_seq=257498 receive_seq=257498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003487 heater_bed: target=0 temp=83.4 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.25 cputime=6639.715 memavail=3613036 print_time=14130.233 buffer_time=0.000 print_stall=5 extruder: target=0 temp=222.5 pwm=0.000 | |
| stepper_x has been manually enabled | |
| stepper_y has been manually enabled | |
| tmc stepper_y: needs_home_current_change False | |
| tmc stepper_x: needs_home_current_change False | |
| Stats 616733.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6885418 bytes_read=7322051 bytes_retransmit=9 bytes_invalid=0 send_seq=257511 receive_seq=257511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=180003483 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.25 cputime=6639.814 memavail=3613388 print_time=14157.047 buffer_time=0.000 print_stall=5 extruder: target=0 temp=220.6 pwm=0.000 | |
| tmc stepper_y: needs_run_current_change False | |
| tmc stepper_x: needs_run_current_change False | |
| tmc stepper_y: needs_home_current_change False | |
| tmc stepper_x: needs_home_current_change False | |
| tmc stepper_y: needs_run_current_change False | |
| tmc stepper_x: needs_run_current_change False | |
| tmc stepper_z: needs_home_current_change False | |
| tmc stepper_z1: needs_home_current_change False | |
| tmc stepper_z2: needs_home_current_change False | |
| Unknown command:"NOZZLE_BRUSH" | |
| Stats 616734.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6887858 bytes_read=7323033 bytes_retransmit=9 bytes_invalid=0 send_seq=257581 receive_seq=257581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003503 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.25 cputime=6639.935 memavail=3613424 print_time=14159.460 buffer_time=0.000 print_stall=5 extruder: target=0 temp=218.9 pwm=0.000 | |
| Stats 616735.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6888047 bytes_read=7323562 bytes_retransmit=9 bytes_invalid=0 send_seq=257594 receive_seq=257594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003539 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.25 cputime=6639.987 memavail=3613316 print_time=14159.460 buffer_time=0.000 print_stall=5 extruder: target=0 temp=217.6 pwm=0.000 | |
| Stats 616736.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6888860 bytes_read=7324157 bytes_retransmit=9 bytes_invalid=0 send_seq=257621 receive_seq=257621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003573 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=49.3 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.23 cputime=6640.045 memavail=3613332 print_time=14159.860 buffer_time=0.000 print_stall=5 extruder: target=0 temp=215.9 pwm=0.000 | |
| homing: needs rehome: False | |
| Stats 616737.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6890905 bytes_read=7325135 bytes_retransmit=9 bytes_invalid=0 send_seq=257687 receive_seq=257687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=180003642 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.23 cputime=6640.133 memavail=3613316 print_time=14160.845 buffer_time=0.195 print_stall=5 extruder: target=0 temp=214.4 pwm=0.000 | |
| Stats 616738.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6892173 bytes_read=7325936 bytes_retransmit=9 bytes_invalid=0 send_seq=257730 receive_seq=257730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003778 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=1.23 cputime=6640.210 memavail=3613156 print_time=14161.825 buffer_time=0.000 print_stall=5 extruder: target=0 temp=212.6 pwm=0.000 | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| Stats 616739.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6893634 bytes_read=7326730 bytes_retransmit=9 bytes_invalid=0 send_seq=257776 receive_seq=257776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003784 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.23 cputime=6640.292 memavail=3613320 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=211.1 pwm=0.000 | |
| Stats 616740.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6893808 bytes_read=7327214 bytes_retransmit=9 bytes_invalid=0 send_seq=257789 receive_seq=257789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=49.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.23 cputime=6640.341 memavail=3611316 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=209.5 pwm=0.000 | |
| Stats 616741.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6893982 bytes_read=7327728 bytes_retransmit=9 bytes_invalid=0 send_seq=257802 receive_seq=257802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003772 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=49.5 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.21 cputime=6640.391 memavail=3613600 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=208.2 pwm=0.000 | |
| Stats 616742.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6894156 bytes_read=7328211 bytes_retransmit=9 bytes_invalid=0 send_seq=257815 receive_seq=257815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=49.5 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=1.21 cputime=6640.440 memavail=3613584 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=206.4 pwm=0.000 | |
| Stats 616743.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6894330 bytes_read=7328680 bytes_retransmit=9 bytes_invalid=0 send_seq=257828 receive_seq=257828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003711 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=49.5 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.21 cputime=6640.486 memavail=3613624 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=205.0 pwm=0.000 | |
| Stats 616744.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6894504 bytes_read=7329194 bytes_retransmit=9 bytes_invalid=0 send_seq=257841 receive_seq=257841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=49.6 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.21 cputime=6640.535 memavail=3613600 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=203.6 pwm=0.000 | |
| Stats 616745.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6894678 bytes_read=7329692 bytes_retransmit=9 bytes_invalid=0 send_seq=257854 receive_seq=257854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003647 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=49.6 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.21 cputime=6640.583 memavail=3613552 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=201.8 pwm=0.000 | |
| Stats 616746.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6894852 bytes_read=7330161 bytes_retransmit=9 bytes_invalid=0 send_seq=257867 receive_seq=257867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003607 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=49.7 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.20 cputime=6640.632 memavail=3613608 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=200.6 pwm=0.000 | |
| Stats 616747.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6895026 bytes_read=7330675 bytes_retransmit=9 bytes_invalid=0 send_seq=257880 receive_seq=257880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003549 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=49.7 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.20 cputime=6640.681 memavail=3613468 print_time=14162.200 buffer_time=0.000 print_stall=5 extruder: target=0 temp=199.2 pwm=0.000 | |
| Starting SD card print (position 0) | |
| stepper_x has been manually enabled | |
| stepper_y has been manually enabled | |
| tmc stepper_y: needs_home_current_change False | |
| tmc stepper_x: needs_home_current_change False | |
| Stats 616748.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6895241 bytes_read=7331158 bytes_retransmit=9 bytes_invalid=0 send_seq=257893 receive_seq=257893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 sd_pos=16280 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=49.7 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.20 cputime=6640.762 memavail=3613512 print_time=14172.079 buffer_time=0.000 print_stall=5 extruder: target=0 temp=197.4 pwm=0.000 | |
| Stats 616749.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6895933 bytes_read=7331849 bytes_retransmit=9 bytes_invalid=0 send_seq=257928 receive_seq=257928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003566 sd_pos=16280 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=49.8 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=1.20 cputime=6640.833 memavail=3613104 print_time=14172.829 buffer_time=0.000 print_stall=5 extruder: target=0 temp=195.8 pwm=0.000 | |
| Stats 616750.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6896658 bytes_read=7332695 bytes_retransmit=9 bytes_invalid=0 send_seq=257970 receive_seq=257970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003535 sd_pos=16280 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=49.8 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.20 cputime=6640.910 memavail=3613208 print_time=14173.829 buffer_time=0.000 print_stall=5 extruder: target=0 temp=194.6 pwm=0.000 | |
| Stats 616751.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6897385 bytes_read=7333492 bytes_retransmit=9 bytes_invalid=0 send_seq=258013 receive_seq=258013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003489 sd_pos=16280 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.18 cputime=6640.986 memavail=3613200 print_time=14174.829 buffer_time=0.000 print_stall=5 extruder: target=0 temp=193.0 pwm=0.000 | |
| tmc stepper_y: needs_run_current_change False | |
| tmc stepper_x: needs_run_current_change False | |
| tmc stepper_y: needs_home_current_change False | |
| tmc stepper_x: needs_home_current_change False | |
| Stats 616752.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6898220 bytes_read=7334327 bytes_retransmit=9 bytes_invalid=0 send_seq=258056 receive_seq=258056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003469 sd_pos=16280 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.18 cputime=6641.070 memavail=3613264 print_time=14175.831 buffer_time=0.000 print_stall=5 extruder: target=0 temp=191.5 pwm=0.000 | |
| Stats 616753.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6898940 bytes_read=7335158 bytes_retransmit=9 bytes_invalid=0 send_seq=258096 receive_seq=258096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003456 sd_pos=16280 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.18 cputime=6641.145 memavail=3613220 print_time=14176.831 buffer_time=0.000 print_stall=5 extruder: target=0 temp=190.2 pwm=0.000 | |
| Stats 616754.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6899667 bytes_read=7335972 bytes_retransmit=9 bytes_invalid=0 send_seq=258136 receive_seq=258136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003551 sd_pos=16280 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.18 cputime=6641.221 memavail=3613244 print_time=14177.831 buffer_time=0.000 print_stall=5 extruder: target=0 temp=188.5 pwm=0.000 | |
| tmc stepper_y: needs_run_current_change False | |
| tmc stepper_x: needs_run_current_change False | |
| tmc stepper_z: needs_home_current_change False | |
| tmc stepper_z1: needs_home_current_change False | |
| tmc stepper_z2: needs_home_current_change False | |
| Stats 616755.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=6901920 bytes_read=7336976 bytes_retransmit=9 bytes_invalid=0 send_seq=258205 receive_seq=258205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003559 sd_pos=16280 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=1.18 cputime=6641.336 memavail=3613148 print_time=14180.333 buffer_time=0.000 print_stall=5 extruder: target=0 temp=187.9 pwm=0.000 | |
| Stats 616756.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=6902109 bytes_read=7337490 bytes_retransmit=9 bytes_invalid=0 send_seq=258218 receive_seq=258218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003512 sd_pos=16280 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=1.17 cputime=6641.387 memavail=3613412 print_time=14180.333 buffer_time=0.000 print_stall=5 extruder: target=0 temp=186.5 pwm=0.000 | |
| Stats 616757.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=6903054 bytes_read=7338138 bytes_retransmit=9 bytes_invalid=0 send_seq=258250 receive_seq=258250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003549 sd_pos=16280 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=1.17 cputime=6641.447 memavail=3613276 print_time=14180.833 buffer_time=0.000 print_stall=5 extruder: target=0 temp=184.8 pwm=0.000 | |
| homing: needs rehome: False | |
| Stats 616758.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=6904799 bytes_read=7339024 bytes_retransmit=9 bytes_invalid=0 send_seq=258306 receive_seq=258306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003555 sd_pos=16280 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=1.17 cputime=6641.531 memavail=3613252 print_time=14181.897 buffer_time=0.000 print_stall=5 extruder: target=0 temp=183.5 pwm=0.000 | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| Stats 616759.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=6907309 bytes_read=7340101 bytes_retransmit=9 bytes_invalid=0 send_seq=258380 receive_seq=258380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003591 sd_pos=16280 heater_bed: target=105 temp=82.6 pwm=0.800 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=1.17 cputime=6641.629 memavail=3613124 print_time=14183.009 buffer_time=0.346 print_stall=5 extruder: target=0 temp=182.5 pwm=0.000 | |
| Heater heater_bed approaching new target of 105.000 | |
| Stats 616760.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6907483 bytes_read=7340599 bytes_retransmit=9 bytes_invalid=0 send_seq=258393 receive_seq=258393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003578 sd_pos=16280 heater_bed: target=105 temp=82.6 pwm=0.800 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=1.17 cputime=6641.683 memavail=3613084 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=181.3 pwm=0.000 | |
| TMC 'stepper_z' reports DRV_STATUS: 801f0000 cs_actual=31 stst=1 | |
| Stats 616761.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6907657 bytes_read=7341068 bytes_retransmit=9 bytes_invalid=0 send_seq=258406 receive_seq=258406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003519 sd_pos=16280 heater_bed: target=105 temp=82.6 pwm=0.800 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=1.15 cputime=6641.732 memavail=3613084 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=179.9 pwm=0.000 | |
| Stats 616762.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6907831 bytes_read=7341582 bytes_retransmit=9 bytes_invalid=0 send_seq=258419 receive_seq=258419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003593 sd_pos=16280 heater_bed: target=105 temp=82.8 pwm=0.800 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=1.15 cputime=6641.784 memavail=3613260 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=178.9 pwm=0.000 | |
| Stats 616763.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6908005 bytes_read=7342065 bytes_retransmit=9 bytes_invalid=0 send_seq=258432 receive_seq=258432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003534 sd_pos=16280 heater_bed: target=105 temp=83.0 pwm=0.800 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.15 cputime=6641.836 memavail=3613156 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=177.4 pwm=0.000 | |
| Stats 616764.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=6908195 bytes_read=7342539 bytes_retransmit=9 bytes_invalid=0 send_seq=258446 receive_seq=258446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003491 sd_pos=16280 heater_bed: target=105 temp=83.3 pwm=0.800 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.15 cputime=6641.883 memavail=3613220 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=176.2 pwm=0.000 | |
| Stats 616765.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6908369 bytes_read=7343068 bytes_retransmit=9 bytes_invalid=0 send_seq=258459 receive_seq=258459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 sd_pos=16280 heater_bed: target=105 temp=83.8 pwm=0.800 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.15 cputime=6641.933 memavail=3613260 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=175.3 pwm=0.000 | |
| Stats 616766.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6908543 bytes_read=7343551 bytes_retransmit=9 bytes_invalid=0 send_seq=258472 receive_seq=258472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003556 sd_pos=16280 heater_bed: target=105 temp=84.1 pwm=0.800 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.14 cputime=6641.983 memavail=3613312 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=173.8 pwm=0.000 | |
| Stats 616767.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6908717 bytes_read=7344020 bytes_retransmit=9 bytes_invalid=0 send_seq=258485 receive_seq=258485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003485 sd_pos=16280 heater_bed: target=105 temp=84.5 pwm=0.800 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=1.14 cputime=6642.032 memavail=3613152 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=172.8 pwm=0.000 | |
| Stats 616768.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6908907 bytes_read=7344539 bytes_retransmit=9 bytes_invalid=0 send_seq=258499 receive_seq=258499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003569 sd_pos=16280 heater_bed: target=105 temp=85.0 pwm=0.800 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=1.14 cputime=6642.084 memavail=3613328 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=171.5 pwm=0.000 | |
| Stats 616769.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909081 bytes_read=7345022 bytes_retransmit=9 bytes_invalid=0 send_seq=258512 receive_seq=258512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003630 sd_pos=16280 heater_bed: target=105 temp=85.3 pwm=0.800 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=1.14 cputime=6642.134 memavail=3613136 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=170.3 pwm=0.000 | |
| Stats 616770.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909255 bytes_read=7345506 bytes_retransmit=9 bytes_invalid=0 send_seq=258525 receive_seq=258525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 sd_pos=16280 heater_bed: target=105 temp=85.7 pwm=0.800 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=1.14 cputime=6642.183 memavail=3613232 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=169.2 pwm=0.000 | |
| Stats 616771.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909429 bytes_read=7346020 bytes_retransmit=9 bytes_invalid=0 send_seq=258538 receive_seq=258538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003791 sd_pos=16280 heater_bed: target=105 temp=86.2 pwm=0.800 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=1.13 cputime=6642.233 memavail=3613264 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=168.0 pwm=0.000 | |
| Stats 616772.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909619 bytes_read=7346508 bytes_retransmit=9 bytes_invalid=0 send_seq=258552 receive_seq=258552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 sd_pos=16280 heater_bed: target=105 temp=86.6 pwm=0.800 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.13 cputime=6642.283 memavail=3613176 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=166.8 pwm=0.000 | |
| Stats 616773.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909793 bytes_read=7346977 bytes_retransmit=9 bytes_invalid=0 send_seq=258565 receive_seq=258565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003704 sd_pos=16280 heater_bed: target=105 temp=86.9 pwm=0.800 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.13 cputime=6642.331 memavail=3613188 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=165.9 pwm=0.000 | |
| Stats 616774.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6909967 bytes_read=7347475 bytes_retransmit=9 bytes_invalid=0 send_seq=258578 receive_seq=258578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003808 sd_pos=16280 heater_bed: target=105 temp=87.4 pwm=0.800 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.13 cputime=6642.381 memavail=3613244 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=164.8 pwm=0.000 | |
| Stats 616775.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6910141 bytes_read=7347967 bytes_retransmit=9 bytes_invalid=0 send_seq=258591 receive_seq=258591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003715 sd_pos=16280 heater_bed: target=105 temp=87.8 pwm=0.800 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.13 cputime=6642.432 memavail=3613392 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=163.5 pwm=0.000 | |
| Stats 616776.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6910331 bytes_read=7348441 bytes_retransmit=9 bytes_invalid=0 send_seq=258605 receive_seq=258605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003696 sd_pos=16280 heater_bed: target=105 temp=88.1 pwm=0.800 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=1.12 cputime=6642.481 memavail=3613216 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=162.4 pwm=0.000 | |
| Stats 616777.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6910505 bytes_read=7348955 bytes_retransmit=9 bytes_invalid=0 send_seq=258618 receive_seq=258618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003715 sd_pos=16280 heater_bed: target=105 temp=88.6 pwm=0.800 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.12 cputime=6642.532 memavail=3613184 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=161.5 pwm=0.000 | |
| Stats 616778.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6910679 bytes_read=7349438 bytes_retransmit=9 bytes_invalid=0 send_seq=258631 receive_seq=258631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003630 sd_pos=16280 heater_bed: target=105 temp=89.0 pwm=0.800 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.12 cputime=6642.583 memavail=3613248 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=160.1 pwm=0.000 | |
| Stats 616779.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6910853 bytes_read=7349907 bytes_retransmit=9 bytes_invalid=0 send_seq=258644 receive_seq=258644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003669 sd_pos=16280 heater_bed: target=105 temp=89.4 pwm=0.800 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.12 cputime=6642.632 memavail=3613168 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=159.2 pwm=0.000 | |
| Stats 616780.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911043 bytes_read=7350441 bytes_retransmit=9 bytes_invalid=0 send_seq=258658 receive_seq=258658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003710 sd_pos=16280 heater_bed: target=105 temp=89.9 pwm=0.800 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.12 cputime=6642.684 memavail=3613152 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=158.2 pwm=0.000 | |
| Stats 616781.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911217 bytes_read=7350924 bytes_retransmit=9 bytes_invalid=0 send_seq=258671 receive_seq=258671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003642 sd_pos=16280 heater_bed: target=105 temp=90.3 pwm=0.800 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.11 cputime=6642.737 memavail=3613288 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=157.1 pwm=0.000 | |
| Stats 616782.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911391 bytes_read=7351393 bytes_retransmit=9 bytes_invalid=0 send_seq=258684 receive_seq=258684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 sd_pos=16280 heater_bed: target=105 temp=90.7 pwm=0.800 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=1.11 cputime=6642.788 memavail=3613256 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=156.1 pwm=0.000 | |
| Stats 616783.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911565 bytes_read=7351907 bytes_retransmit=9 bytes_invalid=0 send_seq=258697 receive_seq=258697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003588 sd_pos=16280 heater_bed: target=105 temp=91.2 pwm=0.800 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.11 cputime=6642.840 memavail=3613376 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=155.1 pwm=0.000 | |
| Stats 616784.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911739 bytes_read=7352390 bytes_retransmit=9 bytes_invalid=0 send_seq=258710 receive_seq=258710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003513 sd_pos=16280 heater_bed: target=105 temp=91.6 pwm=0.800 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.11 cputime=6642.891 memavail=3613272 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=154.1 pwm=0.000 | |
| Stats 616785.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6911929 bytes_read=7352879 bytes_retransmit=9 bytes_invalid=0 send_seq=258724 receive_seq=258724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003626 sd_pos=16280 heater_bed: target=105 temp=92.0 pwm=0.800 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.11 cputime=6642.941 memavail=3613200 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=153.2 pwm=0.000 | |
| Stats 616786.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912103 bytes_read=7353393 bytes_retransmit=9 bytes_invalid=0 send_seq=258737 receive_seq=258737 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003549 sd_pos=16280 heater_bed: target=105 temp=92.5 pwm=0.800 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.10 cputime=6642.992 memavail=3613184 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=152.3 pwm=0.000 | |
| Stats 616787.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912277 bytes_read=7353876 bytes_retransmit=9 bytes_invalid=0 send_seq=258750 receive_seq=258750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003510 sd_pos=16280 heater_bed: target=105 temp=92.9 pwm=0.800 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.10 cputime=6643.044 memavail=3613328 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=151.1 pwm=0.000 | |
| Stats 616788.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912451 bytes_read=7354345 bytes_retransmit=9 bytes_invalid=0 send_seq=258763 receive_seq=258763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003471 sd_pos=16280 heater_bed: target=105 temp=93.2 pwm=0.800 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.10 cputime=6643.093 memavail=3613128 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=150.6 pwm=0.000 | |
| Stats 616789.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912636 bytes_read=7354859 bytes_retransmit=9 bytes_invalid=0 send_seq=258776 receive_seq=258776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003504 sd_pos=16280 heater_bed: target=105 temp=93.7 pwm=0.800 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=1.10 cputime=6643.145 memavail=3613256 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=149.5 pwm=0.000 | |
| Stats 616790.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912810 bytes_read=7355357 bytes_retransmit=9 bytes_invalid=0 send_seq=258789 receive_seq=258789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003469 sd_pos=16280 heater_bed: target=105 temp=94.1 pwm=0.800 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.10 cputime=6643.194 memavail=3613296 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=148.4 pwm=0.000 | |
| Stats 616791.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6912984 bytes_read=7355826 bytes_retransmit=9 bytes_invalid=0 send_seq=258802 receive_seq=258802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003512 sd_pos=16280 heater_bed: target=105 temp=94.4 pwm=0.800 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.17 cputime=6643.243 memavail=3613104 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=147.4 pwm=0.000 | |
| Stats 616792.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6913158 bytes_read=7356340 bytes_retransmit=9 bytes_invalid=0 send_seq=258815 receive_seq=258815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003479 sd_pos=16280 heater_bed: target=105 temp=94.9 pwm=0.800 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.17 cputime=6643.297 memavail=3613400 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=146.7 pwm=0.000 | |
| Stats 616793.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6913348 bytes_read=7356828 bytes_retransmit=9 bytes_invalid=0 send_seq=258829 receive_seq=258829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003493 sd_pos=16280 heater_bed: target=105 temp=95.3 pwm=0.800 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.17 cputime=6643.349 memavail=3613424 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=145.7 pwm=0.000 | |
| Stats 616794.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6913522 bytes_read=7357297 bytes_retransmit=9 bytes_invalid=0 send_seq=258842 receive_seq=258842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003479 sd_pos=16280 heater_bed: target=105 temp=95.5 pwm=0.800 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=1.17 cputime=6643.397 memavail=3613492 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=144.9 pwm=0.000 | |
| Stats 616795.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6913696 bytes_read=7357826 bytes_retransmit=9 bytes_invalid=0 send_seq=258855 receive_seq=258855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003484 sd_pos=16280 heater_bed: target=105 temp=96.0 pwm=0.800 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.17 cputime=6643.446 memavail=3613388 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=144.0 pwm=0.000 | |
| Stats 616796.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6913870 bytes_read=7358309 bytes_retransmit=9 bytes_invalid=0 send_seq=258868 receive_seq=258868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003461 sd_pos=16280 heater_bed: target=105 temp=96.3 pwm=0.800 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.16 cputime=6643.497 memavail=3613228 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=142.9 pwm=0.000 | |
| Stats 616797.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914060 bytes_read=7358782 bytes_retransmit=9 bytes_invalid=0 send_seq=258882 receive_seq=258882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003466 sd_pos=16280 heater_bed: target=105 temp=96.6 pwm=0.800 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.16 cputime=6643.546 memavail=3613348 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=142.2 pwm=0.000 | |
| Stats 616798.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914234 bytes_read=7359280 bytes_retransmit=9 bytes_invalid=0 send_seq=258895 receive_seq=258895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003490 sd_pos=16280 heater_bed: target=105 temp=97.0 pwm=0.800 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.16 cputime=6643.599 memavail=3613572 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=141.2 pwm=0.000 | |
| Stats 616799.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914414 bytes_read=7359775 bytes_retransmit=9 bytes_invalid=0 send_seq=258909 receive_seq=258909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003561 sd_pos=16280 heater_bed: target=105 temp=97.3 pwm=0.800 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=1.16 cputime=6643.651 memavail=3613316 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=140.4 pwm=0.000 | |
| Stats 616800.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914588 bytes_read=7360259 bytes_retransmit=9 bytes_invalid=0 send_seq=258922 receive_seq=258922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003514 sd_pos=16280 heater_bed: target=105 temp=97.6 pwm=0.800 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=1.16 cputime=6643.701 memavail=3613224 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=139.8 pwm=0.000 | |
| Stats 616801.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914778 bytes_read=7360778 bytes_retransmit=9 bytes_invalid=0 send_seq=258936 receive_seq=258936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003446 sd_pos=16280 heater_bed: target=105 temp=98.0 pwm=0.800 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=1.14 cputime=6643.752 memavail=3613288 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=138.8 pwm=0.000 | |
| Stats 616802.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6914952 bytes_read=7361261 bytes_retransmit=9 bytes_invalid=0 send_seq=258949 receive_seq=258949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003467 sd_pos=16280 heater_bed: target=105 temp=98.3 pwm=0.800 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=1.14 cputime=6643.804 memavail=3613352 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=138.0 pwm=0.000 | |
| Stats 616803.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6915126 bytes_read=7361745 bytes_retransmit=9 bytes_invalid=0 send_seq=258962 receive_seq=258962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003578 sd_pos=16280 heater_bed: target=105 temp=98.7 pwm=0.800 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=1.14 cputime=6643.854 memavail=3613440 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=137.3 pwm=0.000 | |
| Stats 616804.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6915300 bytes_read=7362244 bytes_retransmit=9 bytes_invalid=0 send_seq=258975 receive_seq=258975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003551 sd_pos=16280 heater_bed: target=105 temp=98.9 pwm=0.800 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.14 cputime=6643.906 memavail=3613512 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=136.5 pwm=0.000 | |
| Stats 616805.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6915474 bytes_read=7362742 bytes_retransmit=9 bytes_invalid=0 send_seq=258988 receive_seq=258988 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003487 sd_pos=16280 heater_bed: target=105 temp=99.2 pwm=0.800 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.14 cputime=6643.956 memavail=3613552 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=135.5 pwm=0.000 | |
| Stats 616806.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6915664 bytes_read=7363231 bytes_retransmit=9 bytes_invalid=0 send_seq=259002 receive_seq=259002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003449 sd_pos=16280 heater_bed: target=105 temp=99.6 pwm=0.800 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.21 cputime=6644.005 memavail=3613356 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=134.8 pwm=0.000 | |
| Stats 616807.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6915838 bytes_read=7363730 bytes_retransmit=9 bytes_invalid=0 send_seq=259015 receive_seq=259015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003455 sd_pos=16280 heater_bed: target=105 temp=99.8 pwm=0.800 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.21 cputime=6644.056 memavail=3613460 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=134.1 pwm=0.000 | |
| Stats 616808.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916012 bytes_read=7364213 bytes_retransmit=9 bytes_invalid=0 send_seq=259028 receive_seq=259028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003428 sd_pos=16280 heater_bed: target=105 temp=100.1 pwm=0.800 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.21 cputime=6644.105 memavail=3613324 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=133.2 pwm=0.000 | |
| TMC 'stepper_z2' reports DRV_STATUS: 801f0000 cs_actual=31 stst=1 | |
| Heater heater_bed within range of 105.000 | |
| Stats 616809.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916186 bytes_read=7364712 bytes_retransmit=9 bytes_invalid=0 send_seq=259041 receive_seq=259041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003481 sd_pos=16280 heater_bed: target=105 temp=100.5 pwm=0.800 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=1.21 cputime=6644.157 memavail=3613428 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=132.3 pwm=0.000 | |
| Stats 616810.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916387 bytes_read=7365216 bytes_retransmit=9 bytes_invalid=0 send_seq=259055 receive_seq=259055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003482 sd_pos=16280 heater_bed: target=105 temp=100.7 pwm=0.724 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.21 cputime=6644.211 memavail=3613476 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=131.7 pwm=0.000 | |
| Stats 616811.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916561 bytes_read=7365699 bytes_retransmit=9 bytes_invalid=0 send_seq=259068 receive_seq=259068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003476 sd_pos=16280 heater_bed: target=105 temp=101.0 pwm=0.724 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.28 cputime=6644.263 memavail=3613300 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=131.1 pwm=0.000 | |
| Stats 616812.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916735 bytes_read=7366183 bytes_retransmit=9 bytes_invalid=0 send_seq=259081 receive_seq=259081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003514 sd_pos=16280 heater_bed: target=105 temp=101.3 pwm=0.724 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.28 cputime=6644.313 memavail=3613340 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=130.3 pwm=0.000 | |
| Stats 616813.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6916920 bytes_read=7366682 bytes_retransmit=9 bytes_invalid=0 send_seq=259094 receive_seq=259094 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003521 sd_pos=16280 heater_bed: target=105 temp=101.6 pwm=0.659 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=1.28 cputime=6644.365 memavail=3613492 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=129.5 pwm=0.000 | |
| Stats 616814.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917094 bytes_read=7367180 bytes_retransmit=9 bytes_invalid=0 send_seq=259107 receive_seq=259107 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003632 sd_pos=16280 heater_bed: target=105 temp=101.9 pwm=0.659 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.28 cputime=6644.415 memavail=3613396 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=128.9 pwm=0.000 | |
| Stats 616815.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917268 bytes_read=7367664 bytes_retransmit=9 bytes_invalid=0 send_seq=259120 receive_seq=259120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003573 sd_pos=16280 heater_bed: target=105 temp=102.1 pwm=0.659 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.28 cputime=6644.462 memavail=3613316 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=128.1 pwm=0.000 | |
| Stats 616816.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917453 bytes_read=7368163 bytes_retransmit=9 bytes_invalid=0 send_seq=259133 receive_seq=259133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003625 sd_pos=16280 heater_bed: target=105 temp=102.4 pwm=0.597 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.33 cputime=6644.513 memavail=3613556 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=127.4 pwm=0.000 | |
| Stats 616817.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917627 bytes_read=7368646 bytes_retransmit=9 bytes_invalid=0 send_seq=259146 receive_seq=259146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003577 sd_pos=16280 heater_bed: target=105 temp=102.6 pwm=0.597 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.33 cputime=6644.564 memavail=3613472 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=126.7 pwm=0.000 | |
| Stats 616818.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917801 bytes_read=7369130 bytes_retransmit=9 bytes_invalid=0 send_seq=259159 receive_seq=259159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003552 sd_pos=16280 heater_bed: target=105 temp=102.9 pwm=0.597 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.33 cputime=6644.613 memavail=3613440 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=125.8 pwm=0.000 | |
| Stats 616819.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6917975 bytes_read=7369629 bytes_retransmit=9 bytes_invalid=0 send_seq=259172 receive_seq=259172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003579 sd_pos=16280 heater_bed: target=105 temp=103.0 pwm=0.597 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=1.33 cputime=6644.662 memavail=3613280 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=125.3 pwm=0.000 | |
| Stats 616820.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6918181 bytes_read=7370137 bytes_retransmit=9 bytes_invalid=0 send_seq=259187 receive_seq=259187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003599 sd_pos=16280 heater_bed: target=105 temp=103.2 pwm=0.594 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.33 cputime=6644.713 memavail=3613368 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=124.5 pwm=0.000 | |
| Stats 616821.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6918355 bytes_read=7370616 bytes_retransmit=9 bytes_invalid=0 send_seq=259200 receive_seq=259200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003577 sd_pos=16280 heater_bed: target=105 temp=103.4 pwm=0.594 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.31 cputime=6644.763 memavail=3613368 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=123.9 pwm=0.000 | |
| Stats 616822.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6918529 bytes_read=7371100 bytes_retransmit=9 bytes_invalid=0 send_seq=259213 receive_seq=259213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003518 sd_pos=16280 heater_bed: target=105 temp=103.5 pwm=0.594 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.31 cputime=6644.812 memavail=3613560 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=123.5 pwm=0.000 | |
| Stats 616823.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6918703 bytes_read=7371582 bytes_retransmit=9 bytes_invalid=0 send_seq=259226 receive_seq=259226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003576 sd_pos=16280 heater_bed: target=105 temp=103.7 pwm=0.594 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.31 cputime=6644.860 memavail=3613352 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=122.5 pwm=0.000 | |
| Stats 616824.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6918893 bytes_read=7372071 bytes_retransmit=9 bytes_invalid=0 send_seq=259240 receive_seq=259240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003622 sd_pos=16280 heater_bed: target=105 temp=103.9 pwm=0.595 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.31 cputime=6644.910 memavail=3613384 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=122.1 pwm=0.000 | |
| Stats 616825.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6919083 bytes_read=7372590 bytes_retransmit=9 bytes_invalid=0 send_seq=259254 receive_seq=259254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003649 sd_pos=16280 heater_bed: target=105 temp=104.0 pwm=0.527 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.31 cputime=6644.962 memavail=3613384 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=121.4 pwm=0.000 | |
| Stats 616826.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6919257 bytes_read=7373073 bytes_retransmit=9 bytes_invalid=0 send_seq=259267 receive_seq=259267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003691 sd_pos=16280 heater_bed: target=105 temp=104.1 pwm=0.527 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.28 cputime=6645.012 memavail=3613456 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=120.7 pwm=0.000 | |
| Stats 616827.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6919431 bytes_read=7373557 bytes_retransmit=9 bytes_invalid=0 send_seq=259280 receive_seq=259280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003720 sd_pos=16280 heater_bed: target=105 temp=104.2 pwm=0.527 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=1.28 cputime=6645.061 memavail=3613432 print_time=14183.009 buffer_time=0.000 print_stall=5 extruder: target=0 temp=120.2 pwm=0.000 | |
| Stats 616828.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6919621 bytes_read=7374061 bytes_retransmit=9 bytes_invalid=0 send_seq=259294 receive_seq=259294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003756 sd_pos=16280 heater_bed: target=105 temp=104.3 pwm=0.527 z_thermal_adjust: temp=52.3 chamber_heater: target=55 temp=50.6 pwm=1.000 sysload=1.28 cputime=6645.113 memavail=3613272 print_time=14251.874 buffer_time=0.156 print_stall=5 extruder: target=0 temp=119.5 pwm=0.000 | |
| Stats 616829.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6919843 bytes_read=7374559 bytes_retransmit=9 bytes_invalid=0 send_seq=259310 receive_seq=259310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003771 sd_pos=16280 heater_bed: target=105 temp=104.5 pwm=0.527 z_thermal_adjust: temp=52.3 chamber_heater: target=55 temp=50.7 pwm=0.816 sysload=1.28 cputime=6645.167 memavail=3613348 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=118.7 pwm=0.000 | |
| Stats 616830.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6920071 bytes_read=7375068 bytes_retransmit=9 bytes_invalid=0 send_seq=259325 receive_seq=259325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003759 sd_pos=16280 heater_bed: target=105 temp=104.6 pwm=0.521 z_thermal_adjust: temp=52.4 chamber_heater: target=55 temp=50.7 pwm=0.863 sysload=1.28 cputime=6645.221 memavail=3613572 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=118.4 pwm=0.000 | |
| Stats 616831.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6920277 bytes_read=7375577 bytes_retransmit=9 bytes_invalid=0 send_seq=259340 receive_seq=259340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003841 sd_pos=16280 heater_bed: target=105 temp=104.7 pwm=0.521 z_thermal_adjust: temp=52.4 chamber_heater: target=55 temp=50.7 pwm=0.666 sysload=1.26 cputime=6645.273 memavail=3613404 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=118.0 pwm=0.000 | |
| Stats 616832.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6920483 bytes_read=7376070 bytes_retransmit=9 bytes_invalid=0 send_seq=259355 receive_seq=259355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003915 sd_pos=16280 heater_bed: target=105 temp=104.8 pwm=0.521 z_thermal_adjust: temp=52.4 chamber_heater: target=55 temp=50.7 pwm=1.000 sysload=1.26 cputime=6645.327 memavail=3613396 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=117.1 pwm=0.000 | |
| Stats 616833.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6920716 bytes_read=7376569 bytes_retransmit=9 bytes_invalid=0 send_seq=259371 receive_seq=259371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003944 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.443 z_thermal_adjust: temp=52.4 chamber_heater: target=55 temp=50.7 pwm=1.000 sysload=1.26 cputime=6645.380 memavail=3613332 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=116.6 pwm=0.000 | |
| Stats 616834.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6920906 bytes_read=7377073 bytes_retransmit=9 bytes_invalid=0 send_seq=259385 receive_seq=259385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004030 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.443 z_thermal_adjust: temp=52.4 chamber_heater: target=55 temp=50.7 pwm=0.738 sysload=1.26 cputime=6645.433 memavail=3613500 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=116.1 pwm=0.000 | |
| Stats 616835.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6921112 bytes_read=7377581 bytes_retransmit=9 bytes_invalid=0 send_seq=259400 receive_seq=259400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004125 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.443 z_thermal_adjust: temp=52.5 chamber_heater: target=55 temp=50.8 pwm=0.919 sysload=1.26 cputime=6645.487 memavail=3613228 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=115.3 pwm=0.000 | |
| Stats 616836.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6921329 bytes_read=7378075 bytes_retransmit=9 bytes_invalid=0 send_seq=259415 receive_seq=259415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004158 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.443 z_thermal_adjust: temp=52.5 chamber_heater: target=55 temp=50.8 pwm=0.999 sysload=1.24 cputime=6645.540 memavail=3613388 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=114.8 pwm=0.000 | |
| Stats 616837.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6921546 bytes_read=7378584 bytes_retransmit=9 bytes_invalid=0 send_seq=259430 receive_seq=259430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004080 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.475 z_thermal_adjust: temp=52.5 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.24 cputime=6645.595 memavail=3613432 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=114.3 pwm=0.000 | |
| Stats 616838.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6921720 bytes_read=7379067 bytes_retransmit=9 bytes_invalid=0 send_seq=259443 receive_seq=259443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004123 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.475 z_thermal_adjust: temp=52.5 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.24 cputime=6645.648 memavail=3613568 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=113.6 pwm=0.000 | |
| Stats 616839.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6921894 bytes_read=7379551 bytes_retransmit=9 bytes_invalid=0 send_seq=259456 receive_seq=259456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004180 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.475 z_thermal_adjust: temp=52.6 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.24 cputime=6645.699 memavail=3613288 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=113.0 pwm=0.000 | |
| Stats 616840.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6922068 bytes_read=7380065 bytes_retransmit=9 bytes_invalid=0 send_seq=259469 receive_seq=259469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004178 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.475 z_thermal_adjust: temp=52.6 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.24 cputime=6645.751 memavail=3613484 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=112.3 pwm=0.000 | |
| Stats 616841.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6922269 bytes_read=7380553 bytes_retransmit=9 bytes_invalid=0 send_seq=259483 receive_seq=259483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004095 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.464 z_thermal_adjust: temp=52.6 chamber_heater: target=55 temp=50.8 pwm=0.757 sysload=1.22 cputime=6645.803 memavail=3613500 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=111.9 pwm=0.000 | |
| Stats 616842.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6922475 bytes_read=7381047 bytes_retransmit=9 bytes_invalid=0 send_seq=259498 receive_seq=259498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003999 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.464 z_thermal_adjust: temp=52.6 chamber_heater: target=55 temp=50.8 pwm=0.923 sysload=1.22 cputime=6645.856 memavail=3613468 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=111.5 pwm=0.000 | |
| Stats 616843.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6922687 bytes_read=7381565 bytes_retransmit=9 bytes_invalid=0 send_seq=259512 receive_seq=259512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003942 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.464 z_thermal_adjust: temp=52.7 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.22 cputime=6645.908 memavail=3613428 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=110.9 pwm=0.000 | |
| Stats 616844.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6922861 bytes_read=7382034 bytes_retransmit=9 bytes_invalid=0 send_seq=259525 receive_seq=259525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.464 z_thermal_adjust: temp=52.7 chamber_heater: target=55 temp=50.8 pwm=1.000 sysload=1.22 cputime=6645.961 memavail=3613452 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=110.2 pwm=0.000 | |
| Stats 616845.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6923035 bytes_read=7382527 bytes_retransmit=9 bytes_invalid=0 send_seq=259538 receive_seq=259538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004087 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.500 z_thermal_adjust: temp=52.7 chamber_heater: target=55 temp=50.9 pwm=1.000 sysload=1.22 cputime=6646.012 memavail=3613556 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=110.1 pwm=0.000 | |
| Stats 616846.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6923258 bytes_read=7383030 bytes_retransmit=9 bytes_invalid=0 send_seq=259552 receive_seq=259552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004041 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.500 z_thermal_adjust: temp=52.8 chamber_heater: target=55 temp=50.9 pwm=0.942 sysload=1.20 cputime=6646.064 memavail=3613356 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=109.3 pwm=0.000 | |
| Stats 616847.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6923459 bytes_read=7383504 bytes_retransmit=9 bytes_invalid=0 send_seq=259566 receive_seq=259566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004067 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.500 z_thermal_adjust: temp=52.8 chamber_heater: target=55 temp=50.9 pwm=0.887 sysload=1.20 cputime=6646.116 memavail=3613516 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=108.8 pwm=0.000 | |
| Stats 616848.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6923692 bytes_read=7384003 bytes_retransmit=9 bytes_invalid=0 send_seq=259582 receive_seq=259582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004062 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.445 z_thermal_adjust: temp=52.8 chamber_heater: target=55 temp=50.9 pwm=0.777 sysload=1.20 cputime=6646.168 memavail=3613372 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=108.4 pwm=0.000 | |
| Stats 616849.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6923915 bytes_read=7384521 bytes_retransmit=9 bytes_invalid=0 send_seq=259596 receive_seq=259596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.445 z_thermal_adjust: temp=52.9 chamber_heater: target=55 temp=51.0 pwm=0.854 sysload=1.20 cputime=6646.218 memavail=3613400 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=107.9 pwm=0.000 | |
| Stats 616850.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6924105 bytes_read=7385010 bytes_retransmit=9 bytes_invalid=0 send_seq=259610 receive_seq=259610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004027 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.445 z_thermal_adjust: temp=52.9 chamber_heater: target=55 temp=51.0 pwm=0.709 sysload=1.20 cputime=6646.269 memavail=3613536 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=107.5 pwm=0.000 | |
| Stats 616851.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6924311 bytes_read=7385504 bytes_retransmit=9 bytes_invalid=0 send_seq=259625 receive_seq=259625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003965 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.394 z_thermal_adjust: temp=53.0 chamber_heater: target=55 temp=51.0 pwm=0.822 sysload=1.19 cputime=6646.318 memavail=3613384 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=107.1 pwm=0.000 | |
| Stats 616852.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6924534 bytes_read=7386022 bytes_retransmit=9 bytes_invalid=0 send_seq=259639 receive_seq=259639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003934 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.394 z_thermal_adjust: temp=53.0 chamber_heater: target=55 temp=51.1 pwm=0.574 sysload=1.19 cputime=6646.370 memavail=3613416 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=106.7 pwm=0.000 | |
| Stats 616853.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6924751 bytes_read=7386501 bytes_retransmit=9 bytes_invalid=0 send_seq=259654 receive_seq=259654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003884 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.453 z_thermal_adjust: temp=53.0 chamber_heater: target=55 temp=51.2 pwm=0.348 sysload=1.19 cputime=6646.423 memavail=3613304 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=106.1 pwm=0.000 | |
| Stats 616854.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6924952 bytes_read=7386990 bytes_retransmit=9 bytes_invalid=0 send_seq=259668 receive_seq=259668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003914 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.453 z_thermal_adjust: temp=53.1 chamber_heater: target=55 temp=51.3 pwm=0.534 sysload=1.19 cputime=6646.473 memavail=3613432 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=105.7 pwm=0.000 | |
| Stats 616855.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6925175 bytes_read=7387523 bytes_retransmit=9 bytes_invalid=0 send_seq=259682 receive_seq=259682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003939 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.453 z_thermal_adjust: temp=53.1 chamber_heater: target=55 temp=51.4 pwm=0.248 sysload=1.19 cputime=6646.523 memavail=3613320 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=105.2 pwm=0.000 | |
| Stats 616856.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6925381 bytes_read=7388002 bytes_retransmit=9 bytes_invalid=0 send_seq=259697 receive_seq=259697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.453 z_thermal_adjust: temp=53.2 chamber_heater: target=55 temp=51.4 pwm=0.336 sysload=1.17 cputime=6646.574 memavail=3613320 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=104.9 pwm=0.000 | |
| Stats 616857.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6925598 bytes_read=7388511 bytes_retransmit=9 bytes_invalid=0 send_seq=259712 receive_seq=259712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003927 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.421 z_thermal_adjust: temp=53.2 chamber_heater: target=55 temp=51.5 pwm=0.198 sysload=1.17 cputime=6646.624 memavail=3613464 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=104.7 pwm=0.000 | |
| Stats 616858.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6925799 bytes_read=7389014 bytes_retransmit=9 bytes_invalid=0 send_seq=259726 receive_seq=259726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003880 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.421 z_thermal_adjust: temp=53.3 chamber_heater: target=55 temp=51.6 pwm=0.341 sysload=1.17 cputime=6646.674 memavail=3613352 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=104.1 pwm=0.000 | |
| Stats 616859.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6926020 bytes_read=7389498 bytes_retransmit=9 bytes_invalid=0 send_seq=259742 receive_seq=259742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003909 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.421 z_thermal_adjust: temp=53.4 chamber_heater: target=55 temp=51.7 pwm=0.188 sysload=1.17 cputime=6646.724 memavail=3613528 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=103.5 pwm=0.000 | |
| Stats 616860.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6926231 bytes_read=7390022 bytes_retransmit=9 bytes_invalid=0 send_seq=259757 receive_seq=259757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003880 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.421 z_thermal_adjust: temp=53.4 chamber_heater: target=55 temp=51.8 pwm=0.000 sysload=1.17 cputime=6646.775 memavail=3613472 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=103.3 pwm=0.000 | |
| Stats 616861.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6926459 bytes_read=7390541 bytes_retransmit=9 bytes_invalid=0 send_seq=259772 receive_seq=259772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.408 z_thermal_adjust: temp=53.5 chamber_heater: target=55 temp=51.9 pwm=0.091 sysload=1.24 cputime=6646.830 memavail=3612760 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=102.6 pwm=0.000 | |
| Stats 616862.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6926661 bytes_read=7391020 bytes_retransmit=9 bytes_invalid=0 send_seq=259787 receive_seq=259787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003882 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.408 z_thermal_adjust: temp=53.6 chamber_heater: target=55 temp=52.0 pwm=0.071 sysload=1.24 cputime=6646.879 memavail=3612992 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=102.4 pwm=0.000 | |
| Stats 616863.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6926862 bytes_read=7391524 bytes_retransmit=9 bytes_invalid=0 send_seq=259801 receive_seq=259801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003827 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.357 z_thermal_adjust: temp=53.7 chamber_heater: target=55 temp=52.0 pwm=0.344 sysload=1.24 cputime=6646.930 memavail=3613060 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=102.1 pwm=0.000 | |
| Stats 616864.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6927065 bytes_read=7392022 bytes_retransmit=9 bytes_invalid=0 send_seq=259814 receive_seq=259814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.357 z_thermal_adjust: temp=53.7 chamber_heater: target=55 temp=52.2 pwm=0.110 sysload=1.24 cputime=6646.981 memavail=3613092 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=101.8 pwm=0.000 | |
| Stats 616865.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6927287 bytes_read=7392521 bytes_retransmit=9 bytes_invalid=0 send_seq=259830 receive_seq=259830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003870 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.357 z_thermal_adjust: temp=53.8 chamber_heater: target=55 temp=52.2 pwm=0.092 sysload=1.24 cputime=6647.031 memavail=3613100 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=101.4 pwm=0.000 | |
| Stats 616866.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6927503 bytes_read=7393030 bytes_retransmit=9 bytes_invalid=0 send_seq=259845 receive_seq=259845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003879 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.357 z_thermal_adjust: temp=53.9 chamber_heater: target=55 temp=52.3 pwm=0.374 sysload=1.22 cputime=6647.082 memavail=3613096 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=101.0 pwm=0.000 | |
| Stats 616867.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6927712 bytes_read=7393533 bytes_retransmit=9 bytes_invalid=0 send_seq=259859 receive_seq=259859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003950 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.357 z_thermal_adjust: temp=53.9 chamber_heater: target=55 temp=52.4 pwm=0.088 sysload=1.22 cputime=6647.133 memavail=3613080 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=100.7 pwm=0.000 | |
| Stats 616868.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6927928 bytes_read=7394012 bytes_retransmit=9 bytes_invalid=0 send_seq=259874 receive_seq=259874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003882 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.345 z_thermal_adjust: temp=54.0 chamber_heater: target=55 temp=52.4 pwm=0.204 sysload=1.22 cputime=6647.185 memavail=3613264 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=100.5 pwm=0.000 | |
| Stats 616869.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6928155 bytes_read=7394510 bytes_retransmit=9 bytes_invalid=0 send_seq=259889 receive_seq=259889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 sd_pos=16280 heater_bed: target=105 temp=105.6 pwm=0.398 z_thermal_adjust: temp=54.0 chamber_heater: target=55 temp=52.5 pwm=0.091 sysload=1.22 cputime=6647.236 memavail=3613160 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=100.0 pwm=0.000 | |
| Stats 616870.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6928366 bytes_read=7395017 bytes_retransmit=9 bytes_invalid=0 send_seq=259903 receive_seq=259903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003792 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.398 z_thermal_adjust: temp=54.1 chamber_heater: target=55 temp=52.6 pwm=0.003 sysload=1.22 cputime=6647.288 memavail=3613032 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=99.3 pwm=0.000 | |
| Stats 616871.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6928540 bytes_read=7395486 bytes_retransmit=9 bytes_invalid=0 send_seq=259916 receive_seq=259916 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003881 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.398 z_thermal_adjust: temp=54.1 chamber_heater: target=55 temp=52.7 pwm=0.003 sysload=1.20 cputime=6647.338 memavail=3613152 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=99.1 pwm=0.000 | |
| Stats 616872.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6928746 bytes_read=7396010 bytes_retransmit=9 bytes_invalid=0 send_seq=259931 receive_seq=259931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=180003891 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.398 z_thermal_adjust: temp=54.1 chamber_heater: target=55 temp=52.7 pwm=0.030 sysload=1.20 cputime=6647.389 memavail=3613192 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=98.8 pwm=0.000 | |
| Stats 616873.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6928968 bytes_read=7396498 bytes_retransmit=9 bytes_invalid=0 send_seq=259945 receive_seq=259945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003824 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.358 z_thermal_adjust: temp=54.2 chamber_heater: target=55 temp=52.8 pwm=0.142 sysload=1.20 cputime=6647.439 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=98.3 pwm=0.000 | |
| Stats 616874.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6929190 bytes_read=7396982 bytes_retransmit=9 bytes_invalid=0 send_seq=259961 receive_seq=259961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003776 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.358 z_thermal_adjust: temp=54.2 chamber_heater: target=55 temp=52.8 pwm=0.158 sysload=1.20 cputime=6647.488 memavail=3613160 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=98.1 pwm=0.000 | |
| Stats 616875.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6929407 bytes_read=7397521 bytes_retransmit=9 bytes_invalid=0 send_seq=259976 receive_seq=259976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003816 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.358 z_thermal_adjust: temp=54.3 chamber_heater: target=55 temp=52.9 pwm=0.242 sysload=1.20 cputime=6647.542 memavail=3613096 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=97.9 pwm=0.000 | |
| Stats 616876.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6929614 bytes_read=7398004 bytes_retransmit=9 bytes_invalid=0 send_seq=259989 receive_seq=259989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003753 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.358 z_thermal_adjust: temp=54.3 chamber_heater: target=55 temp=52.9 pwm=0.155 sysload=1.18 cputime=6647.591 memavail=3612968 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=97.5 pwm=0.000 | |
| Stats 616877.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6929820 bytes_read=7398483 bytes_retransmit=9 bytes_invalid=0 send_seq=260004 receive_seq=260004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003724 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.358 z_thermal_adjust: temp=54.3 chamber_heater: target=55 temp=53.0 pwm=0.261 sysload=1.18 cputime=6647.637 memavail=3613104 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=97.2 pwm=0.000 | |
| Stats 616878.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6930043 bytes_read=7399002 bytes_retransmit=9 bytes_invalid=0 send_seq=260018 receive_seq=260018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=180003830 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.368 z_thermal_adjust: temp=54.4 chamber_heater: target=55 temp=53.0 pwm=0.000 sysload=1.18 cputime=6647.688 memavail=3613216 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=96.9 pwm=0.000 | |
| Stats 616879.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6930263 bytes_read=7399490 bytes_retransmit=9 bytes_invalid=0 send_seq=260032 receive_seq=260032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003808 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.368 z_thermal_adjust: temp=54.4 chamber_heater: target=55 temp=53.1 pwm=0.192 sysload=1.18 cputime=6647.738 memavail=3613180 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=96.4 pwm=0.000 | |
| Stats 616880.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6930485 bytes_read=7399989 bytes_retransmit=9 bytes_invalid=0 send_seq=260048 receive_seq=260048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.368 z_thermal_adjust: temp=54.4 chamber_heater: target=55 temp=53.1 pwm=0.573 sysload=1.18 cputime=6647.789 memavail=3613076 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=96.1 pwm=0.000 | |
| Stats 616881.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6930718 bytes_read=7400518 bytes_retransmit=9 bytes_invalid=0 send_seq=260064 receive_seq=260064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003839 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.312 z_thermal_adjust: temp=54.5 chamber_heater: target=55 temp=53.1 pwm=0.563 sysload=1.17 cputime=6647.841 memavail=3613204 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=95.9 pwm=0.000 | |
| Stats 616882.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6930919 bytes_read=7401006 bytes_retransmit=9 bytes_invalid=0 send_seq=260078 receive_seq=260078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003818 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.312 z_thermal_adjust: temp=54.5 chamber_heater: target=55 temp=53.2 pwm=0.327 sysload=1.17 cputime=6647.893 memavail=3613172 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=95.5 pwm=0.000 | |
| Stats 616883.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6931125 bytes_read=7401485 bytes_retransmit=9 bytes_invalid=0 send_seq=260093 receive_seq=260093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003749 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.312 z_thermal_adjust: temp=54.5 chamber_heater: target=55 temp=53.1 pwm=0.767 sysload=1.17 cputime=6647.942 memavail=3613164 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=95.3 pwm=0.000 | |
| Stats 616884.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6931342 bytes_read=7402009 bytes_retransmit=9 bytes_invalid=0 send_seq=260108 receive_seq=260108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003732 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.312 z_thermal_adjust: temp=54.6 chamber_heater: target=55 temp=53.2 pwm=0.557 sysload=1.17 cputime=6647.994 memavail=3613148 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=95.0 pwm=0.000 | |
| Stats 616885.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6931581 bytes_read=7402517 bytes_retransmit=9 bytes_invalid=0 send_seq=260123 receive_seq=260123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.316 z_thermal_adjust: temp=54.6 chamber_heater: target=55 temp=53.2 pwm=0.387 sysload=1.17 cputime=6648.046 memavail=3613112 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=94.5 pwm=0.000 | |
| Stats 616886.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6931803 bytes_read=7403001 bytes_retransmit=9 bytes_invalid=0 send_seq=260139 receive_seq=260139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003750 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.316 z_thermal_adjust: temp=54.6 chamber_heater: target=55 temp=53.2 pwm=0.703 sysload=1.16 cputime=6648.096 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=94.2 pwm=0.000 | |
| Stats 616887.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6932009 bytes_read=7403525 bytes_retransmit=9 bytes_invalid=0 send_seq=260154 receive_seq=260154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003810 sd_pos=16280 heater_bed: target=105 temp=105.5 pwm=0.316 z_thermal_adjust: temp=54.7 chamber_heater: target=55 temp=53.2 pwm=0.530 sysload=1.16 cputime=6648.148 memavail=3613120 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=93.9 pwm=0.000 | |
| Stats 616888.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6932232 bytes_read=7404013 bytes_retransmit=9 bytes_invalid=0 send_seq=260168 receive_seq=260168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.316 z_thermal_adjust: temp=54.7 chamber_heater: target=55 temp=53.2 pwm=0.616 sysload=1.16 cputime=6648.202 memavail=3613232 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=93.7 pwm=0.000 | |
| Stats 616889.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6932449 bytes_read=7404492 bytes_retransmit=9 bytes_invalid=0 send_seq=260183 receive_seq=260183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003752 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.322 z_thermal_adjust: temp=54.8 chamber_heater: target=55 temp=53.2 pwm=0.532 sysload=1.16 cputime=6648.253 memavail=3613276 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=93.5 pwm=0.000 | |
| Stats 616890.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6932666 bytes_read=7405031 bytes_retransmit=9 bytes_invalid=0 send_seq=260198 receive_seq=260198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003836 sd_pos=16280 heater_bed: target=105 temp=105.4 pwm=0.385 z_thermal_adjust: temp=54.8 chamber_heater: target=55 temp=53.2 pwm=0.609 sysload=1.16 cputime=6648.306 memavail=3613148 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=93.1 pwm=0.000 | |
| Stats 616891.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6932889 bytes_read=7405519 bytes_retransmit=9 bytes_invalid=0 send_seq=260212 receive_seq=260212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003766 sd_pos=16280 heater_bed: target=105 temp=105.3 pwm=0.385 z_thermal_adjust: temp=54.8 chamber_heater: target=55 temp=53.3 pwm=0.532 sysload=1.14 cputime=6648.358 memavail=3613180 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=92.9 pwm=0.000 | |
| Stats 616892.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6933117 bytes_read=7405998 bytes_retransmit=9 bytes_invalid=0 send_seq=260227 receive_seq=260227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003744 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.436 z_thermal_adjust: temp=54.9 chamber_heater: target=55 temp=53.3 pwm=0.601 sysload=1.14 cputime=6648.410 memavail=3613116 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=92.5 pwm=0.000 | |
| Stats 616893.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6933323 bytes_read=7406509 bytes_retransmit=9 bytes_invalid=0 send_seq=260242 receive_seq=260242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003722 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.381 z_thermal_adjust: temp=54.9 chamber_heater: target=55 temp=53.3 pwm=0.716 sysload=1.14 cputime=6648.461 memavail=3613116 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=92.3 pwm=0.000 | |
| Stats 616894.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6933524 bytes_read=7406988 bytes_retransmit=9 bytes_invalid=0 send_seq=260256 receive_seq=260256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003673 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.381 z_thermal_adjust: temp=54.9 chamber_heater: target=55 temp=53.3 pwm=0.741 sysload=1.14 cputime=6648.512 memavail=3613252 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=92.0 pwm=0.000 | |
| Stats 616895.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6933730 bytes_read=7407482 bytes_retransmit=9 bytes_invalid=0 send_seq=260271 receive_seq=260271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003627 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.381 z_thermal_adjust: temp=55.0 chamber_heater: target=55 temp=53.3 pwm=0.617 sysload=1.14 cputime=6648.565 memavail=3613132 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=91.7 pwm=0.000 | |
| Stats 616896.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6933947 bytes_read=7408006 bytes_retransmit=9 bytes_invalid=0 send_seq=260286 receive_seq=260286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003687 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.381 z_thermal_adjust: temp=55.0 chamber_heater: target=55 temp=53.3 pwm=0.954 sysload=1.13 cputime=6648.620 memavail=3613300 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=91.7 pwm=0.000 | |
| Stats 616897.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6934181 bytes_read=7408494 bytes_retransmit=9 bytes_invalid=0 send_seq=260300 receive_seq=260300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003743 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.330 z_thermal_adjust: temp=55.0 chamber_heater: target=55 temp=53.3 pwm=0.602 sysload=1.13 cputime=6648.672 memavail=3613148 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=91.2 pwm=0.000 | |
| Stats 616898.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6934387 bytes_read=7408973 bytes_retransmit=9 bytes_invalid=0 send_seq=260315 receive_seq=260315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.330 z_thermal_adjust: temp=55.1 chamber_heater: target=55 temp=53.4 pwm=0.528 sysload=1.13 cputime=6648.723 memavail=3613140 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=90.9 pwm=0.000 | |
| Stats 616899.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6934604 bytes_read=7409497 bytes_retransmit=9 bytes_invalid=0 send_seq=260330 receive_seq=260330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003882 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.330 z_thermal_adjust: temp=55.1 chamber_heater: target=55 temp=53.4 pwm=0.204 sysload=1.13 cputime=6648.775 memavail=3613148 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=90.9 pwm=0.000 | |
| Stats 616900.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6934827 bytes_read=7410000 bytes_retransmit=9 bytes_invalid=0 send_seq=260344 receive_seq=260344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.330 z_thermal_adjust: temp=55.1 chamber_heater: target=55 temp=53.4 pwm=0.322 sysload=1.13 cputime=6648.827 memavail=3613284 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=90.4 pwm=0.000 | |
| Stats 616901.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6935033 bytes_read=7410479 bytes_retransmit=9 bytes_invalid=0 send_seq=260359 receive_seq=260359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003956 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.330 z_thermal_adjust: temp=55.1 chamber_heater: target=55 temp=53.5 pwm=0.368 sysload=1.12 cputime=6648.881 memavail=3613064 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=90.3 pwm=0.000 | |
| Stats 616902.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6935255 bytes_read=7411008 bytes_retransmit=9 bytes_invalid=0 send_seq=260375 receive_seq=260375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003964 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.360 z_thermal_adjust: temp=55.2 chamber_heater: target=55 temp=53.5 pwm=0.385 sysload=1.12 cputime=6648.935 memavail=3613152 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=90.1 pwm=0.000 | |
| Stats 616903.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6935466 bytes_read=7411496 bytes_retransmit=9 bytes_invalid=0 send_seq=260389 receive_seq=260389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003900 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.360 z_thermal_adjust: temp=55.2 chamber_heater: target=55 temp=53.6 pwm=0.055 sysload=1.12 cputime=6648.988 memavail=3613232 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=89.8 pwm=0.000 | |
| Stats 616904.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6935710 bytes_read=7411980 bytes_retransmit=9 bytes_invalid=0 send_seq=260405 receive_seq=260405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003856 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.398 z_thermal_adjust: temp=55.2 chamber_heater: target=55 temp=53.6 pwm=0.300 sysload=1.12 cputime=6649.041 memavail=3613080 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=89.8 pwm=0.000 | |
| Stats 616905.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6935929 bytes_read=7412524 bytes_retransmit=9 bytes_invalid=0 send_seq=260421 receive_seq=260421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003928 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.398 z_thermal_adjust: temp=55.3 chamber_heater: target=55 temp=53.7 pwm=0.205 sysload=1.12 cputime=6649.096 memavail=3613256 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=89.2 pwm=0.000 | |
| Stats 616906.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6936146 bytes_read=7413017 bytes_retransmit=9 bytes_invalid=0 send_seq=260436 receive_seq=260436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.398 z_thermal_adjust: temp=55.3 chamber_heater: target=55 temp=53.7 pwm=0.103 sysload=1.11 cputime=6649.150 memavail=3613136 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=89.0 pwm=0.000 | |
| Stats 616907.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6936349 bytes_read=7413496 bytes_retransmit=9 bytes_invalid=0 send_seq=260451 receive_seq=260451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.398 z_thermal_adjust: temp=55.3 chamber_heater: target=55 temp=53.8 pwm=0.000 sysload=1.11 cputime=6649.204 memavail=3613136 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=89.0 pwm=0.000 | |
| Stats 616908.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6936565 bytes_read=7414020 bytes_retransmit=9 bytes_invalid=0 send_seq=260466 receive_seq=260466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003751 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.396 z_thermal_adjust: temp=55.3 chamber_heater: target=55 temp=53.9 pwm=0.072 sysload=1.11 cputime=6649.258 memavail=3613400 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=88.8 pwm=0.000 | |
| Stats 616909.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6936782 bytes_read=7414513 bytes_retransmit=9 bytes_invalid=0 send_seq=260481 receive_seq=260481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.396 z_thermal_adjust: temp=55.3 chamber_heater: target=55 temp=53.9 pwm=0.247 sysload=1.11 cputime=6649.312 memavail=3613244 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=88.4 pwm=0.000 | |
| Stats 616910.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6936998 bytes_read=7415007 bytes_retransmit=9 bytes_invalid=0 send_seq=260496 receive_seq=260496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003664 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.396 z_thermal_adjust: temp=55.4 chamber_heater: target=55 temp=53.9 pwm=0.304 sysload=1.11 cputime=6649.364 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=88.2 pwm=0.000 | |
| Stats 616911.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6937188 bytes_read=7415526 bytes_retransmit=9 bytes_invalid=0 send_seq=260510 receive_seq=260510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=180003734 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.396 z_thermal_adjust: temp=55.4 chamber_heater: target=55 temp=54.0 pwm=0.055 sysload=1.10 cputime=6649.418 memavail=3613224 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=88.2 pwm=0.000 | |
| Stats 616912.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6937412 bytes_read=7416019 bytes_retransmit=9 bytes_invalid=0 send_seq=260525 receive_seq=260525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003701 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.396 z_thermal_adjust: temp=55.5 chamber_heater: target=55 temp=54.0 pwm=0.000 sysload=1.10 cputime=6649.472 memavail=3613016 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=87.8 pwm=0.000 | |
| Stats 616913.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6937656 bytes_read=7416503 bytes_retransmit=9 bytes_invalid=0 send_seq=260541 receive_seq=260541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.320 z_thermal_adjust: temp=55.5 chamber_heater: target=55 temp=54.0 pwm=0.255 sysload=1.10 cputime=6649.526 memavail=3613176 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=87.5 pwm=0.000 | |
| Stats 616914.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6937875 bytes_read=7417032 bytes_retransmit=9 bytes_invalid=0 send_seq=260557 receive_seq=260557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003644 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.320 z_thermal_adjust: temp=55.5 chamber_heater: target=55 temp=54.1 pwm=0.322 sysload=1.10 cputime=6649.582 memavail=3613292 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=87.5 pwm=0.000 | |
| Stats 616915.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6938088 bytes_read=7417540 bytes_retransmit=9 bytes_invalid=0 send_seq=260572 receive_seq=260572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003747 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.320 z_thermal_adjust: temp=55.6 chamber_heater: target=55 temp=54.2 pwm=0.065 sysload=1.10 cputime=6649.636 memavail=3613132 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=87.3 pwm=0.000 | |
| Stats 616916.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6938307 bytes_read=7418024 bytes_retransmit=9 bytes_invalid=0 send_seq=260588 receive_seq=260588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003719 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.320 z_thermal_adjust: temp=55.6 chamber_heater: target=55 temp=54.2 pwm=0.372 sysload=1.09 cputime=6649.688 memavail=3613172 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=87.1 pwm=0.000 | |
| Stats 616917.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6938523 bytes_read=7418533 bytes_retransmit=9 bytes_invalid=0 send_seq=260603 receive_seq=260603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.325 z_thermal_adjust: temp=55.7 chamber_heater: target=55 temp=54.2 pwm=0.122 sysload=1.09 cputime=6649.742 memavail=3613316 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=86.7 pwm=0.000 | |
| Stats 616918.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6938742 bytes_read=7419025 bytes_retransmit=9 bytes_invalid=0 send_seq=260619 receive_seq=260619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003740 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.325 z_thermal_adjust: temp=55.7 chamber_heater: target=55 temp=54.2 pwm=0.407 sysload=1.09 cputime=6649.796 memavail=3613172 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=86.6 pwm=0.000 | |
| Stats 616919.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6938958 bytes_read=7419504 bytes_retransmit=9 bytes_invalid=0 send_seq=260634 receive_seq=260634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003746 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.325 z_thermal_adjust: temp=55.7 chamber_heater: target=55 temp=54.3 pwm=0.342 sysload=1.09 cputime=6649.849 memavail=3613088 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=86.4 pwm=0.000 | |
| Stats 616920.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6939180 bytes_read=7420048 bytes_retransmit=9 bytes_invalid=0 send_seq=260650 receive_seq=260650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003739 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.325 z_thermal_adjust: temp=55.7 chamber_heater: target=55 temp=54.3 pwm=0.653 sysload=1.09 cputime=6649.903 memavail=3613264 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=86.3 pwm=0.000 | |
| Stats 616921.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6939381 bytes_read=7420536 bytes_retransmit=9 bytes_invalid=0 send_seq=260664 receive_seq=260664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003788 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.325 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.3 pwm=0.402 sysload=1.08 cputime=6649.954 memavail=3613196 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.9 pwm=0.000 | |
| Stats 616922.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6939604 bytes_read=7421031 bytes_retransmit=9 bytes_invalid=0 send_seq=260680 receive_seq=260680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003636 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.343 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.3 pwm=0.369 sysload=1.08 cputime=6650.009 memavail=3613364 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.9 pwm=0.000 | |
| Stats 616923.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6939810 bytes_read=7421555 bytes_retransmit=9 bytes_invalid=0 send_seq=260695 receive_seq=260695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003744 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.343 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.3 pwm=0.357 sysload=1.08 cputime=6650.062 memavail=3613212 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.9 pwm=0.000 | |
| Stats 616924.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6940032 bytes_read=7422053 bytes_retransmit=9 bytes_invalid=0 send_seq=260711 receive_seq=260711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003712 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.343 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.3 pwm=0.362 sysload=1.08 cputime=6650.115 memavail=3613272 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.3 pwm=0.000 | |
| Stats 616925.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6940233 bytes_read=7422542 bytes_retransmit=9 bytes_invalid=0 send_seq=260725 receive_seq=260725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003703 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.343 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.3 pwm=0.391 sysload=1.08 cputime=6650.168 memavail=3613208 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.2 pwm=0.000 | |
| Stats 616926.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6940466 bytes_read=7423071 bytes_retransmit=9 bytes_invalid=0 send_seq=260741 receive_seq=260741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003628 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.359 z_thermal_adjust: temp=55.8 chamber_heater: target=55 temp=54.4 pwm=0.493 sysload=1.08 cputime=6650.223 memavail=3613232 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=85.0 pwm=0.000 | |
| Stats 616927.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6940699 bytes_read=7423569 bytes_retransmit=9 bytes_invalid=0 send_seq=260757 receive_seq=260757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003667 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.359 z_thermal_adjust: temp=55.9 chamber_heater: target=55 temp=54.3 pwm=0.612 sysload=1.08 cputime=6650.276 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.9 pwm=0.000 | |
| Stats 616928.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6940916 bytes_read=7424048 bytes_retransmit=9 bytes_invalid=0 send_seq=260772 receive_seq=260772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003731 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.359 z_thermal_adjust: temp=55.9 chamber_heater: target=55 temp=54.4 pwm=0.486 sysload=1.08 cputime=6650.328 memavail=3613168 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.7 pwm=0.000 | |
| Stats 616929.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6941138 bytes_read=7424577 bytes_retransmit=9 bytes_invalid=0 send_seq=260788 receive_seq=260788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003832 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.359 z_thermal_adjust: temp=55.9 chamber_heater: target=55 temp=54.4 pwm=0.567 sysload=1.08 cputime=6650.382 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.4 pwm=0.000 | |
| Stats 616930.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6941377 bytes_read=7425085 bytes_retransmit=9 bytes_invalid=0 send_seq=260803 receive_seq=260803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003925 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.342 z_thermal_adjust: temp=55.9 chamber_heater: target=55 temp=54.4 pwm=0.317 sysload=1.08 cputime=6650.437 memavail=3613120 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.4 pwm=0.000 | |
| Stats 616931.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6941594 bytes_read=7425564 bytes_retransmit=9 bytes_invalid=0 send_seq=260818 receive_seq=260818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003880 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.342 z_thermal_adjust: temp=55.9 chamber_heater: target=55 temp=54.4 pwm=0.106 sysload=1.15 cputime=6650.490 memavail=3613184 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.1 pwm=0.000 | |
| Stats 616932.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6941800 bytes_read=7426088 bytes_retransmit=9 bytes_invalid=0 send_seq=260833 receive_seq=260833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003784 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.342 z_thermal_adjust: temp=56.0 chamber_heater: target=55 temp=54.4 pwm=0.483 sysload=1.15 cputime=6650.544 memavail=3613184 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.0 pwm=0.000 | |
| Stats 616933.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6942006 bytes_read=7426581 bytes_retransmit=9 bytes_invalid=0 send_seq=260848 receive_seq=260848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003753 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.277 z_thermal_adjust: temp=56.0 chamber_heater: target=55 temp=54.4 pwm=0.369 sysload=1.15 cputime=6650.595 memavail=3613308 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=84.0 pwm=0.000 | |
| Stats 616934.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6942191 bytes_read=7427050 bytes_retransmit=9 bytes_invalid=0 send_seq=260861 receive_seq=260861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.277 z_thermal_adjust: temp=56.0 chamber_heater: target=55 temp=54.4 pwm=0.518 sysload=1.15 cputime=6650.645 memavail=3613200 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=83.9 pwm=0.000 | |
| Stats 616935.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6942413 bytes_read=7427594 bytes_retransmit=9 bytes_invalid=0 send_seq=260877 receive_seq=260877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003601 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.277 z_thermal_adjust: temp=56.0 chamber_heater: target=55 temp=54.4 pwm=0.521 sysload=1.15 cputime=6650.699 memavail=3613272 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=83.5 pwm=0.000 | |
| Stats 616936.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6942646 bytes_read=7428092 bytes_retransmit=9 bytes_invalid=0 send_seq=260893 receive_seq=260893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003555 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.277 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.4 pwm=0.234 sysload=1.22 cputime=6650.750 memavail=3613416 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=83.4 pwm=0.000 | |
| Stats 616937.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6942858 bytes_read=7428566 bytes_retransmit=9 bytes_invalid=0 send_seq=260907 receive_seq=260907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003519 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.326 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.4 pwm=0.411 sysload=1.22 cputime=6650.803 memavail=3613176 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=83.1 pwm=0.000 | |
| Stats 616938.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6943080 bytes_read=7429095 bytes_retransmit=9 bytes_invalid=0 send_seq=260923 receive_seq=260923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003555 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.326 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.4 pwm=0.393 sysload=1.22 cputime=6650.857 memavail=3613216 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.9 pwm=0.000 | |
| Stats 616939.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6943308 bytes_read=7429588 bytes_retransmit=9 bytes_invalid=0 send_seq=260938 receive_seq=260938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003579 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.382 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.4 pwm=0.323 sysload=1.22 cputime=6650.909 memavail=3612976 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.9 pwm=0.000 | |
| Stats 616940.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6943498 bytes_read=7430090 bytes_retransmit=9 bytes_invalid=0 send_seq=260952 receive_seq=260952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003544 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.382 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.5 pwm=0.252 sysload=1.22 cputime=6650.963 memavail=3612828 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.7 pwm=0.000 | |
| Stats 616941.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6943720 bytes_read=7430584 bytes_retransmit=9 bytes_invalid=0 send_seq=260968 receive_seq=260967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003543 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.382 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.5 pwm=0.179 sysload=1.28 cputime=6651.016 memavail=3612964 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.6 pwm=0.000 | |
| Stats 616942.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6943937 bytes_read=7431078 bytes_retransmit=9 bytes_invalid=0 send_seq=260983 receive_seq=260983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003550 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.327 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.5 pwm=0.629 sysload=1.28 cputime=6651.068 memavail=3612964 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.2 pwm=0.000 | |
| Stats 616943.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6944137 bytes_read=7431567 bytes_retransmit=9 bytes_invalid=0 send_seq=260997 receive_seq=260997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003590 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.327 z_thermal_adjust: temp=56.1 chamber_heater: target=55 temp=54.5 pwm=0.161 sysload=1.28 cputime=6651.121 memavail=3612908 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.2 pwm=0.000 | |
| Stats 616944.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6944324 bytes_read=7432086 bytes_retransmit=9 bytes_invalid=0 send_seq=261011 receive_seq=261011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003519 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.327 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.6 pwm=0.000 sysload=1.28 cputime=6651.173 memavail=3613028 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.2 pwm=0.000 | |
| Stats 616945.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6944530 bytes_read=7432579 bytes_retransmit=9 bytes_invalid=0 send_seq=261026 receive_seq=261026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003517 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.327 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.6 pwm=0.138 sysload=1.28 cputime=6651.225 memavail=3612996 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.0 pwm=0.000 | |
| Stats 616946.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6944730 bytes_read=7433068 bytes_retransmit=9 bytes_invalid=0 send_seq=261040 receive_seq=261040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003473 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.339 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.7 pwm=0.023 sysload=1.26 cputime=6651.277 memavail=3613040 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=82.0 pwm=0.000 | |
| Stats 616947.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6944949 bytes_read=7433582 bytes_retransmit=9 bytes_invalid=0 send_seq=261056 receive_seq=261056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003464 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.339 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.7 pwm=0.491 sysload=1.26 cputime=6651.329 memavail=3612912 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.7 pwm=0.000 | |
| Stats 616948.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6945160 bytes_read=7434075 bytes_retransmit=9 bytes_invalid=0 send_seq=261071 receive_seq=261071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003463 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.339 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.8 pwm=0.000 sysload=1.26 cputime=6651.382 memavail=3612952 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.5 pwm=0.000 | |
| Stats 616949.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6945361 bytes_read=7434564 bytes_retransmit=9 bytes_invalid=0 send_seq=261085 receive_seq=261085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003492 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.339 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.8 pwm=0.094 sysload=1.26 cputime=6651.434 memavail=3613040 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.5 pwm=0.000 | |
| Stats 616950.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6945602 bytes_read=7435093 bytes_retransmit=9 bytes_invalid=0 send_seq=261101 receive_seq=261101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003492 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.310 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.8 pwm=0.198 sysload=1.26 cputime=6651.488 memavail=3613032 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.5 pwm=0.000 | |
| Stats 616951.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6945822 bytes_read=7435591 bytes_retransmit=9 bytes_invalid=0 send_seq=261117 receive_seq=261117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003539 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.310 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.8 pwm=0.037 sysload=1.24 cputime=6651.541 memavail=3612932 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.3 pwm=0.000 | |
| Stats 616952.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6946012 bytes_read=7436080 bytes_retransmit=9 bytes_invalid=0 send_seq=261131 receive_seq=261131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003465 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.310 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.9 pwm=0.203 sysload=1.24 cputime=6651.592 memavail=3612980 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.2 pwm=0.000 | |
| Stats 616953.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6946227 bytes_read=7436589 bytes_retransmit=9 bytes_invalid=0 send_seq=261146 receive_seq=261146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003544 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.310 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.9 pwm=0.068 sysload=1.24 cputime=6651.644 memavail=3613068 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.0 pwm=0.000 | |
| Stats 616954.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6946460 bytes_read=7437087 bytes_retransmit=9 bytes_invalid=0 send_seq=261162 receive_seq=261162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003547 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.367 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.9 pwm=0.198 sysload=1.24 cputime=6651.696 memavail=3613044 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.9 pwm=0.000 | |
| Stats 616955.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6946650 bytes_read=7437591 bytes_retransmit=9 bytes_invalid=0 send_seq=261176 receive_seq=261176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003664 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.367 z_thermal_adjust: temp=56.2 chamber_heater: target=55 temp=54.9 pwm=0.105 sysload=1.24 cputime=6651.748 memavail=3612988 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.0 pwm=0.000 | |
| Stats 616956.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6946883 bytes_read=7438105 bytes_retransmit=9 bytes_invalid=0 send_seq=261192 receive_seq=261192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003585 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.367 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=54.9 pwm=0.183 sysload=1.22 cputime=6651.800 memavail=3612932 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=81.0 pwm=0.000 | |
| Stats 616957.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6947089 bytes_read=7438598 bytes_retransmit=9 bytes_invalid=0 send_seq=261207 receive_seq=261207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003651 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.367 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=54.9 pwm=0.404 sysload=1.22 cputime=6651.852 memavail=3612968 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.5 pwm=0.000 | |
| Stats 616958.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6947317 bytes_read=7439092 bytes_retransmit=9 bytes_invalid=0 send_seq=261222 receive_seq=261222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003582 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.366 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.226 sysload=1.22 cputime=6651.905 memavail=3612952 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.5 pwm=0.000 | |
| Stats 616959.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6947534 bytes_read=7439601 bytes_retransmit=9 bytes_invalid=0 send_seq=261237 receive_seq=261237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003662 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.366 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.400 sysload=1.22 cputime=6651.958 memavail=3613136 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.4 pwm=0.000 | |
| Stats 616960.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6947756 bytes_read=7440114 bytes_retransmit=9 bytes_invalid=0 send_seq=261253 receive_seq=261253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003738 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.316 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.413 sysload=1.22 cputime=6652.010 memavail=3613068 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.1 pwm=0.000 | |
| Stats 616961.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6947973 bytes_read=7440608 bytes_retransmit=9 bytes_invalid=0 send_seq=261268 receive_seq=261268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003810 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.316 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.595 sysload=1.20 cputime=6652.063 memavail=3613004 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.0 pwm=0.000 | |
| Stats 616962.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6948201 bytes_read=7441114 bytes_retransmit=9 bytes_invalid=0 send_seq=261283 receive_seq=261283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003862 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.316 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.566 sysload=1.20 cputime=6652.116 memavail=3613068 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=80.0 pwm=0.000 | |
| Stats 616963.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6948418 bytes_read=7441604 bytes_retransmit=9 bytes_invalid=0 send_seq=261298 receive_seq=261298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003921 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.265 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=55.0 pwm=0.168 sysload=1.20 cputime=6652.169 memavail=3613028 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.7 pwm=0.000 | |
| Stats 616964.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6948624 bytes_read=7442090 bytes_retransmit=9 bytes_invalid=0 send_seq=261313 receive_seq=261313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003854 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.265 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=54.9 pwm=0.576 sysload=1.20 cputime=6652.222 memavail=3613028 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.6 pwm=0.000 | |
| Stats 616965.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6948857 bytes_read=7442599 bytes_retransmit=9 bytes_invalid=0 send_seq=261329 receive_seq=261329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003871 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.265 z_thermal_adjust: temp=56.3 chamber_heater: target=55 temp=54.9 pwm=0.380 sysload=1.20 cputime=6652.275 memavail=3612996 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.7 pwm=0.000 | |
| Stats 616966.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6949063 bytes_read=7443087 bytes_retransmit=9 bytes_invalid=0 send_seq=261344 receive_seq=261344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003825 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.265 z_thermal_adjust: temp=56.4 chamber_heater: target=55 temp=54.9 pwm=0.699 sysload=1.19 cputime=6652.326 memavail=3613020 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.5 pwm=0.000 | |
| Stats 616967.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6949285 bytes_read=7443583 bytes_retransmit=9 bytes_invalid=0 send_seq=261360 receive_seq=261360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.279 z_thermal_adjust: temp=56.4 chamber_heater: target=55 temp=54.9 pwm=0.329 sysload=1.19 cputime=6652.380 memavail=3613076 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.4 pwm=0.000 | |
| Stats 616968.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6949502 bytes_read=7444088 bytes_retransmit=9 bytes_invalid=0 send_seq=261375 receive_seq=261375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003819 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.279 z_thermal_adjust: temp=56.4 chamber_heater: target=55 temp=54.9 pwm=0.541 sysload=1.19 cputime=6652.432 memavail=3612972 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.2 pwm=0.000 | |
| Stats 616969.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6949687 bytes_read=7444568 bytes_retransmit=9 bytes_invalid=0 send_seq=261388 receive_seq=261388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003839 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.279 z_thermal_adjust: temp=56.4 chamber_heater: target=55 temp=54.9 pwm=0.473 sysload=1.19 cputime=6652.485 memavail=3612992 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.9 pwm=0.000 | |
| Stats 616970.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6949904 bytes_read=7445074 bytes_retransmit=9 bytes_invalid=0 send_seq=261403 receive_seq=261403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003892 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.279 z_thermal_adjust: temp=56.4 chamber_heater: target=55 temp=54.9 pwm=0.517 sysload=1.19 cputime=6652.537 memavail=3613036 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.0 pwm=0.000 | |
| Stats 616971.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6950153 bytes_read=7445589 bytes_retransmit=9 bytes_invalid=0 send_seq=261420 receive_seq=261420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003874 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.258 z_thermal_adjust: temp=56.5 chamber_heater: target=55 temp=54.9 pwm=0.467 sysload=1.17 cputime=6652.591 memavail=3613044 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=79.1 pwm=0.000 | |
| Stats 616972.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6950375 bytes_read=7446084 bytes_retransmit=9 bytes_invalid=0 send_seq=261436 receive_seq=261436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.258 z_thermal_adjust: temp=56.5 chamber_heater: target=55 temp=54.9 pwm=0.458 sysload=1.17 cputime=6652.646 memavail=3613080 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.9 pwm=0.000 | |
| Stats 616973.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6950581 bytes_read=7446575 bytes_retransmit=9 bytes_invalid=0 send_seq=261451 receive_seq=261451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003748 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.258 z_thermal_adjust: temp=56.5 chamber_heater: target=55 temp=54.8 pwm=0.591 sysload=1.17 cputime=6652.699 memavail=3613048 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.7 pwm=0.000 | |
| Stats 616974.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6950814 bytes_read=7447085 bytes_retransmit=9 bytes_invalid=0 send_seq=261467 receive_seq=261467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003804 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.258 z_thermal_adjust: temp=56.5 chamber_heater: target=55 temp=54.8 pwm=0.641 sysload=1.17 cputime=6652.753 memavail=3612880 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.6 pwm=0.000 | |
| Stats 616975.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6951036 bytes_read=7447595 bytes_retransmit=9 bytes_invalid=0 send_seq=261483 receive_seq=261483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003810 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.286 z_thermal_adjust: temp=56.6 chamber_heater: target=55 temp=54.8 pwm=0.392 sysload=1.17 cputime=6652.806 memavail=3612976 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.5 pwm=0.000 | |
| Stats 616976.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6951248 bytes_read=7448081 bytes_retransmit=9 bytes_invalid=0 send_seq=261497 receive_seq=261497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003816 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.286 z_thermal_adjust: temp=56.6 chamber_heater: target=55 temp=54.8 pwm=0.499 sysload=1.16 cputime=6652.858 memavail=3612936 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.3 pwm=0.000 | |
| Stats 616977.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6951473 bytes_read=7448586 bytes_retransmit=9 bytes_invalid=0 send_seq=261512 receive_seq=261512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.286 z_thermal_adjust: temp=56.6 chamber_heater: target=55 temp=54.8 pwm=0.265 sysload=1.16 cputime=6652.912 memavail=3612880 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.2 pwm=0.000 | |
| Stats 616978.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6951679 bytes_read=7449076 bytes_retransmit=9 bytes_invalid=0 send_seq=261527 receive_seq=261527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003854 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.286 z_thermal_adjust: temp=56.6 chamber_heater: target=55 temp=54.8 pwm=0.413 sysload=1.16 cputime=6652.964 memavail=3612936 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.3 pwm=0.000 | |
| Stats 616979.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6951869 bytes_read=7449562 bytes_retransmit=9 bytes_invalid=0 send_seq=261541 receive_seq=261541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003801 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.303 z_thermal_adjust: temp=56.6 chamber_heater: target=55 temp=54.9 pwm=0.345 sysload=1.16 cputime=6653.018 memavail=3612840 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.1 pwm=0.000 | |
| Stats 616980.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6952084 bytes_read=7450086 bytes_retransmit=9 bytes_invalid=0 send_seq=261554 receive_seq=261554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.303 z_thermal_adjust: temp=56.7 chamber_heater: target=55 temp=54.9 pwm=0.342 sysload=1.16 cputime=6653.071 memavail=3612888 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.0 pwm=0.000 | |
| Stats 616981.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6952306 bytes_read=7450567 bytes_retransmit=9 bytes_invalid=0 send_seq=261570 receive_seq=261570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.303 z_thermal_adjust: temp=56.7 chamber_heater: target=55 temp=54.9 pwm=0.200 sysload=1.22 cputime=6653.124 memavail=3609468 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=78.0 pwm=0.000 | |
| Stats 616982.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6952511 bytes_read=7451058 bytes_retransmit=9 bytes_invalid=0 send_seq=261585 receive_seq=261585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003827 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.303 z_thermal_adjust: temp=56.7 chamber_heater: target=55 temp=54.9 pwm=0.087 sysload=1.22 cputime=6653.179 memavail=3613768 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.9 pwm=0.000 | |
| Stats 616983.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6952742 bytes_read=7451572 bytes_retransmit=9 bytes_invalid=0 send_seq=261599 receive_seq=261599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003773 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.252 z_thermal_adjust: temp=56.8 chamber_heater: target=55 temp=55.0 pwm=0.188 sysload=1.22 cputime=6653.231 memavail=3613792 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.7 pwm=0.000 | |
| Stats 616984.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6952937 bytes_read=7452059 bytes_retransmit=9 bytes_invalid=0 send_seq=261614 receive_seq=261614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003933 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.252 z_thermal_adjust: temp=56.8 chamber_heater: target=55 temp=55.0 pwm=0.030 sysload=1.22 cputime=6653.282 memavail=3613888 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.7 pwm=0.000 | |
| Stats 616985.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6953138 bytes_read=7452560 bytes_retransmit=9 bytes_invalid=0 send_seq=261628 receive_seq=261628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003894 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.252 z_thermal_adjust: temp=56.8 chamber_heater: target=55 temp=55.0 pwm=0.163 sysload=1.22 cputime=6653.334 memavail=3613976 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.5 pwm=0.000 | |
| Stats 616986.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6953360 bytes_read=7453074 bytes_retransmit=9 bytes_invalid=0 send_seq=261642 receive_seq=261642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003915 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.310 z_thermal_adjust: temp=56.8 chamber_heater: target=55 temp=55.0 pwm=0.180 sysload=1.21 cputime=6653.388 memavail=3613936 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.6 pwm=0.000 | |
| Stats 616987.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6953563 bytes_read=7453550 bytes_retransmit=9 bytes_invalid=0 send_seq=261657 receive_seq=261657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003978 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.310 z_thermal_adjust: temp=56.8 chamber_heater: target=55 temp=55.1 pwm=0.000 sysload=1.21 cputime=6653.439 memavail=3613776 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.5 pwm=0.000 | |
| Stats 616988.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6953737 bytes_read=7454025 bytes_retransmit=9 bytes_invalid=0 send_seq=261670 receive_seq=261670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003923 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.310 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.1 pwm=0.000 sysload=1.21 cputime=6653.490 memavail=3613784 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.3 pwm=0.000 | |
| Stats 616989.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6953948 bytes_read=7454524 bytes_retransmit=9 bytes_invalid=0 send_seq=261684 receive_seq=261684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003821 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.310 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.1 pwm=0.091 sysload=1.21 cputime=6653.545 memavail=3613800 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.3 pwm=0.000 | |
| Stats 616990.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6954178 bytes_read=7455020 bytes_retransmit=9 bytes_invalid=0 send_seq=261700 receive_seq=261700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003889 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.244 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.1 pwm=0.241 sysload=1.21 cputime=6653.596 memavail=3613656 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.1 pwm=0.000 | |
| Stats 616991.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6954378 bytes_read=7455506 bytes_retransmit=9 bytes_invalid=0 send_seq=261714 receive_seq=261714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003807 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.233 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.2 pwm=0.064 sysload=1.19 cputime=6653.648 memavail=3613800 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.2 pwm=0.000 | |
| Stats 616992.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6954598 bytes_read=7456020 bytes_retransmit=9 bytes_invalid=0 send_seq=261728 receive_seq=261728 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003880 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.233 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.2 pwm=0.142 sysload=1.19 cputime=6653.701 memavail=3613632 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.0 pwm=0.000 | |
| Stats 616993.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6954814 bytes_read=7456496 bytes_retransmit=9 bytes_invalid=0 send_seq=261743 receive_seq=261743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003912 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.233 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.2 pwm=0.277 sysload=1.19 cputime=6653.753 memavail=3613640 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=77.0 pwm=0.000 | |
| Stats 616994.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6955014 bytes_read=7457011 bytes_retransmit=9 bytes_invalid=0 send_seq=261757 receive_seq=261757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003967 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.283 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.2 pwm=0.227 sysload=1.19 cputime=6653.806 memavail=3613640 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.9 pwm=0.000 | |
| Stats 616995.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6955234 bytes_read=7457511 bytes_retransmit=9 bytes_invalid=0 send_seq=261771 receive_seq=261771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003863 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.283 z_thermal_adjust: temp=56.9 chamber_heater: target=55 temp=55.2 pwm=0.489 sysload=1.19 cputime=6653.859 memavail=3613860 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.9 pwm=0.000 | |
| Stats 616996.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6955453 bytes_read=7457992 bytes_retransmit=9 bytes_invalid=0 send_seq=261787 receive_seq=261787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003795 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.283 z_thermal_adjust: temp=57.0 chamber_heater: target=55 temp=55.2 pwm=0.380 sysload=1.17 cputime=6653.911 memavail=3613564 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.7 pwm=0.000 | |
| Stats 616997.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6955669 bytes_read=7458497 bytes_retransmit=9 bytes_invalid=0 send_seq=261802 receive_seq=261802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003819 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.283 z_thermal_adjust: temp=57.0 chamber_heater: target=55 temp=55.2 pwm=0.242 sysload=1.17 cputime=6653.965 memavail=3613780 print_time=14251.874 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.5 pwm=0.000 | |
| stepper_x has been manually enabled | |
| stepper_y has been manually enabled | |
| stepper_z has been manually enabled | |
| tmc stepper_z: needs_home_current_change False | |
| tmc stepper_z1: needs_home_current_change False | |
| tmc stepper_z2: needs_home_current_change False | |
| Stats 616998.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6956103 bytes_read=7459012 bytes_retransmit=9 bytes_invalid=0 send_seq=261819 receive_seq=261819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=180003802 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.283 z_thermal_adjust: temp=57.0 chamber_heater: target=55 temp=55.2 pwm=0.409 sysload=1.17 cputime=6654.038 memavail=3613868 print_time=14422.717 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.4 pwm=0.000 | |
| Stats 616999.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6956893 bytes_read=7459576 bytes_retransmit=9 bytes_invalid=0 send_seq=261846 receive_seq=261846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003888 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=57.0 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.17 cputime=6654.095 memavail=3613812 print_time=14423.017 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.2 pwm=0.000 | |
| homing: needs rehome: False | |
| Stats 617000.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6958756 bytes_read=7460536 bytes_retransmit=9 bytes_invalid=0 send_seq=261903 receive_seq=261903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=180003945 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=57.1 chamber_heater: target=55 temp=55.2 pwm=0.536 sysload=1.17 cputime=6654.185 memavail=3614016 print_time=14423.953 buffer_time=0.107 print_stall=5 extruder: target=0 temp=76.4 pwm=0.000 | |
| Stats 617001.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6960179 bytes_read=7461331 bytes_retransmit=9 bytes_invalid=0 send_seq=261948 receive_seq=261948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003997 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=57.1 chamber_heater: target=55 temp=55.2 pwm=0.620 sysload=1.16 cputime=6654.261 memavail=3614064 print_time=14425.030 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.2 pwm=0.000 | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| tmc stepper_z: needs_run_current_change False | |
| tmc stepper_z1: needs_run_current_change False | |
| tmc stepper_z2: needs_run_current_change False | |
| Algorithm: lagrange. | |
| Default probe count: 7,7. | |
| Adapted probe count: 5,3. | |
| Default mesh bounds: (40.0, 40.0), (310.0, 310.0). | |
| Mesh margin is 5.0, mesh bounds extended by 5.0mm. | |
| Mesh point fuzzing enabled, points fuzzed up to 1.0mm. | |
| Adapted mesh bounds: (90.7499, 138.35999999999999), (259.90999999999997, 211.59). | |
| KAMP adjustments successful. Happy KAMPing! | |
| Generating new points... | |
| bed_mesh: generated points | |
| Index | Tool Adjusted | Probe | |
| 0 | (90.7, 138.4) | (90.7, 138.4) | |
| 1 | (133.0, 138.4) | (133.0, 138.4) | |
| 2 | (175.3, 138.4) | (175.3, 138.4) | |
| 3 | (217.6, 138.4) | (217.6, 138.4) | |
| 4 | (259.9, 138.4) | (259.9, 138.4) | |
| 5 | (259.9, 175.0) | (259.9, 175.0) | |
| 6 | (217.6, 175.0) | (217.6, 175.0) | |
| 7 | (175.3, 175.0) | (175.3, 175.0) | |
| 8 | (133.0, 175.0) | (133.0, 175.0) | |
| 9 | (90.7, 175.0) | (90.7, 175.0) | |
| 10 | (90.7, 211.6) | (90.7, 211.6) | |
| 11 | (133.0, 211.6) | (133.0, 211.6) | |
| 12 | (175.3, 211.6) | (175.3, 211.6) | |
| 13 | (217.6, 211.6) | (217.6, 211.6) | |
| 14 | (259.9, 211.6) | (259.9, 211.6) | |
| Updated Mesh Configuration: | |
| x_count: 5 | |
| y_count: 3 | |
| mesh_x_pps: 2 | |
| mesh_y_pps: 2 | |
| algo: lagrange | |
| tension: 0.2 | |
| TMC 'stepper_z2' reports DRV_STATUS: 801f0101 otpw=1(OvertempWarning!) t120=1 cs_actual=31 stst=1 | |
| Stats 617002.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6963833 bytes_read=7462303 bytes_retransmit=9 bytes_invalid=0 send_seq=262033 receive_seq=262033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004001 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.344 z_thermal_adjust: temp=57.1 chamber_heater: target=55 temp=55.3 pwm=0.000 sysload=1.16 cputime=6654.403 memavail=3613984 print_time=14426.702 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.1 pwm=0.000 | |
| TMC 'stepper_z2' reports DRV_STATUS: 801f0000 cs_actual=31 stst=1 | |
| Stats 617003.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6964650 bytes_read=7462935 bytes_retransmit=9 bytes_invalid=0 send_seq=262062 receive_seq=262062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003985 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.262 z_thermal_adjust: temp=57.1 chamber_heater: target=55 temp=55.2 pwm=0.228 sysload=1.16 cputime=6654.466 memavail=3614056 print_time=14427.052 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.9 pwm=0.000 | |
| Stats 617004.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=6966487 bytes_read=7463827 bytes_retransmit=9 bytes_invalid=0 send_seq=262121 receive_seq=262121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003968 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.262 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.2 pwm=0.458 sysload=1.16 cputime=6654.549 memavail=3614192 print_time=14428.052 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.8 pwm=0.000 | |
| probe at 90.750,138.362 is z=-1.354375 | |
| Stats 617005.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6968666 bytes_read=7464770 bytes_retransmit=9 bytes_invalid=0 send_seq=262186 receive_seq=262186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003978 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.331 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.2 pwm=0.401 sysload=1.16 cputime=6654.644 memavail=3613952 print_time=14429.058 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.6 pwm=0.000 | |
| probe at 90.750,138.362 is z=-1.353125 | |
| Stats 617006.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6970760 bytes_read=7465736 bytes_retransmit=9 bytes_invalid=0 send_seq=262247 receive_seq=262247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180004032 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.331 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.2 pwm=0.218 sysload=1.15 cputime=6654.736 memavail=3614096 print_time=14430.065 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.0 pwm=0.000 | |
| probe at 90.750,138.362 is z=-1.357500 | |
| Stats 617007.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6973174 bytes_read=7466749 bytes_retransmit=9 bytes_invalid=0 send_seq=262315 receive_seq=262315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003940 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.335 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.1 pwm=0.639 sysload=1.15 cputime=6654.841 memavail=3614040 print_time=14431.103 buffer_time=0.000 print_stall=5 extruder: target=0 temp=76.0 pwm=0.000 | |
| probe at 90.750,138.362 is z=-1.358125 | |
| Stats 617008.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6975904 bytes_read=7467783 bytes_retransmit=9 bytes_invalid=0 send_seq=262390 receive_seq=262390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180004000 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.335 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.1 pwm=0.959 sysload=1.15 cputime=6654.951 memavail=3614224 print_time=14432.793 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.8 pwm=0.000 | |
| Stats 617009.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6976639 bytes_read=7468391 bytes_retransmit=9 bytes_invalid=0 send_seq=262417 receive_seq=262417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003949 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.269 z_thermal_adjust: temp=57.2 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.15 cputime=6655.011 memavail=3614080 print_time=14433.043 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.8 pwm=0.000 | |
| Stats 617010.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6978372 bytes_read=7469264 bytes_retransmit=9 bytes_invalid=0 send_seq=262469 receive_seq=262469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003895 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.269 z_thermal_adjust: temp=57.3 chamber_heater: target=55 temp=55.1 pwm=0.444 sysload=1.15 cputime=6655.093 memavail=3614256 print_time=14434.043 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.3 pwm=0.000 | |
| probe at 133.041,138.359 is z=-1.538750 | |
| Stats 617011.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6980589 bytes_read=7470177 bytes_retransmit=9 bytes_invalid=0 send_seq=262531 receive_seq=262531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003882 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.269 z_thermal_adjust: temp=57.3 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.13 cputime=6655.187 memavail=3614144 print_time=14435.053 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.5 pwm=0.000 | |
| probe at 133.041,138.359 is z=-1.537500 | |
| Stats 617012.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6982953 bytes_read=7471171 bytes_retransmit=9 bytes_invalid=0 send_seq=262597 receive_seq=262597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003833 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.269 z_thermal_adjust: temp=57.3 chamber_heater: target=55 temp=55.1 pwm=0.585 sysload=1.13 cputime=6655.289 memavail=3614168 print_time=14436.040 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.4 pwm=0.000 | |
| probe at 133.041,138.359 is z=-1.534375 | |
| Stats 617013.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6985202 bytes_read=7472162 bytes_retransmit=9 bytes_invalid=0 send_seq=262665 receive_seq=262665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=180003849 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.269 z_thermal_adjust: temp=57.3 chamber_heater: target=55 temp=55.1 pwm=0.639 sysload=1.13 cputime=6655.390 memavail=3614056 print_time=14437.075 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.2 pwm=0.000 | |
| probe at 133.041,138.359 is z=-1.531250 | |
| Stats 617014.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6987897 bytes_read=7473181 bytes_retransmit=9 bytes_invalid=0 send_seq=262737 receive_seq=262737 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=180003919 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.306 z_thermal_adjust: temp=57.4 chamber_heater: target=55 temp=55.1 pwm=0.341 sysload=1.13 cputime=6655.499 memavail=3614144 print_time=14438.716 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.5 pwm=0.000 | |
| Stats 617015.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6988753 bytes_read=7473824 bytes_retransmit=9 bytes_invalid=0 send_seq=262765 receive_seq=262765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=180003933 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.306 z_thermal_adjust: temp=57.4 chamber_heater: target=55 temp=55.1 pwm=0.000 sysload=1.13 cputime=6655.561 memavail=3614200 print_time=14439.066 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.3 pwm=0.000 | |
| Stats 617016.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6990609 bytes_read=7474716 bytes_retransmit=9 bytes_invalid=0 send_seq=262824 receive_seq=262824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003907 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.306 z_thermal_adjust: temp=57.4 chamber_heater: target=55 temp=55.1 pwm=0.674 sysload=1.20 cputime=6655.648 memavail=3614248 print_time=14440.066 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.7 pwm=0.000 | |
| probe at 175.328,138.359 is z=-1.660625 | |
| Stats 617017.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6992975 bytes_read=7475696 bytes_retransmit=9 bytes_invalid=0 send_seq=262891 receive_seq=262891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003954 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.377 z_thermal_adjust: temp=57.4 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.20 cputime=6655.744 memavail=3614116 print_time=14441.049 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.1 pwm=0.000 | |
| probe at 175.328,138.359 is z=-1.640625 | |
| Stats 617018.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6995442 bytes_read=7476711 bytes_retransmit=9 bytes_invalid=0 send_seq=262959 receive_seq=262959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003886 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.272 z_thermal_adjust: temp=57.5 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.20 cputime=6655.841 memavail=3614196 print_time=14442.035 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.2 pwm=0.000 | |
| probe at 175.328,138.359 is z=-1.631875 | |
| Stats 617019.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=6997481 bytes_read=7477642 bytes_retransmit=9 bytes_invalid=0 send_seq=263019 receive_seq=263019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.272 z_thermal_adjust: temp=57.5 chamber_heater: target=55 temp=55.1 pwm=0.348 sysload=1.20 cputime=6655.932 memavail=3614236 print_time=14443.042 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.9 pwm=0.000 | |
| probe at 175.328,138.359 is z=-1.623750 | |
| Stats 617020.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7000208 bytes_read=7478686 bytes_retransmit=9 bytes_invalid=0 send_seq=263093 receive_seq=263093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003942 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.272 z_thermal_adjust: temp=57.5 chamber_heater: target=55 temp=55.1 pwm=0.338 sysload=1.20 cputime=6656.043 memavail=3614252 print_time=14444.690 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.1 pwm=0.000 | |
| Stats 617021.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7001051 bytes_read=7479313 bytes_retransmit=9 bytes_invalid=0 send_seq=263121 receive_seq=263121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003959 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.5 chamber_heater: target=55 temp=55.2 pwm=0.263 sysload=1.35 cputime=6656.106 memavail=3614220 print_time=14445.040 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.6 pwm=0.000 | |
| Stats 617022.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7002892 bytes_read=7480190 bytes_retransmit=9 bytes_invalid=0 send_seq=263177 receive_seq=263177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003937 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.345 z_thermal_adjust: temp=57.5 chamber_heater: target=55 temp=55.2 pwm=0.332 sysload=1.35 cputime=6656.189 memavail=3614220 print_time=14446.040 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.8 pwm=0.000 | |
| probe at 217.622,138.359 is z=-1.838125 | |
| Stats 617023.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7005098 bytes_read=7481117 bytes_retransmit=9 bytes_invalid=0 send_seq=263239 receive_seq=263239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003870 sd_pos=16280 heater_bed: target=105 temp=104.8 pwm=0.427 z_thermal_adjust: temp=57.6 chamber_heater: target=55 temp=55.2 pwm=0.253 sysload=1.35 cputime=6656.280 memavail=3614204 print_time=14447.047 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.7 pwm=0.000 | |
| probe at 217.622,138.359 is z=-1.833750 | |
| Stats 617024.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7007115 bytes_read=7482063 bytes_retransmit=9 bytes_invalid=0 send_seq=263296 receive_seq=263296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=180003885 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.312 z_thermal_adjust: temp=57.6 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.35 cputime=6656.377 memavail=3614116 print_time=14448.053 buffer_time=0.000 print_stall=5 extruder: target=0 temp=75.0 pwm=0.000 | |
| probe at 217.622,138.359 is z=-1.835000 | |
| Stats 617025.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7009683 bytes_read=7483121 bytes_retransmit=9 bytes_invalid=0 send_seq=263370 receive_seq=263370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003794 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.312 z_thermal_adjust: temp=57.6 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=1.35 cputime=6656.479 memavail=3614140 print_time=14449.140 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.7 pwm=0.000 | |
| probe at 217.622,138.359 is z=-1.831250 | |
| Stats 617026.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7012392 bytes_read=7484145 bytes_retransmit=9 bytes_invalid=0 send_seq=263443 receive_seq=263443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=180003708 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.312 z_thermal_adjust: temp=57.6 chamber_heater: target=55 temp=55.1 pwm=0.839 sysload=1.48 cputime=6656.590 memavail=3614132 print_time=14450.838 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.6 pwm=0.000 | |
| Stats 617027.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7013063 bytes_read=7484724 bytes_retransmit=9 bytes_invalid=0 send_seq=263467 receive_seq=263467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=180003806 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.312 z_thermal_adjust: temp=57.6 chamber_heater: target=55 temp=55.3 pwm=0.000 sysload=1.48 cputime=6656.650 memavail=3614284 print_time=14451.038 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.4 pwm=0.000 | |
| Stats 617028.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7014798 bytes_read=7485595 bytes_retransmit=9 bytes_invalid=0 send_seq=263519 receive_seq=263519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=180003802 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.303 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.2 pwm=0.357 sysload=1.48 cputime=6656.732 memavail=3614240 print_time=14452.038 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.4 pwm=0.000 | |
| probe at 259.909,138.359 is z=-1.971250 | |
| Stats 617029.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7017102 bytes_read=7486533 bytes_retransmit=9 bytes_invalid=0 send_seq=263586 receive_seq=263586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003759 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.303 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.3 pwm=0.025 sysload=1.48 cputime=6656.825 memavail=3614152 print_time=14453.044 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.4 pwm=0.000 | |
| probe at 259.909,138.359 is z=-1.973125 | |
| Stats 617030.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7019454 bytes_read=7487578 bytes_retransmit=9 bytes_invalid=0 send_seq=263654 receive_seq=263654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003822 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.303 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.3 pwm=0.384 sysload=1.48 cputime=6656.926 memavail=3614108 print_time=14454.082 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.5 pwm=0.000 | |
| probe at 259.909,138.359 is z=-1.975000 | |
| Stats 617031.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7021834 bytes_read=7488576 bytes_retransmit=9 bytes_invalid=0 send_seq=263719 receive_seq=263719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003775 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.303 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.3 pwm=0.000 sysload=1.52 cputime=6657.026 memavail=3614108 print_time=14455.116 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.5 pwm=0.000 | |
| probe at 259.909,138.359 is z=-1.978125 | |
| Stats 617032.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7024670 bytes_read=7489630 bytes_retransmit=9 bytes_invalid=0 send_seq=263798 receive_seq=263798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003744 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.303 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.3 pwm=0.150 sysload=1.52 cputime=6657.139 memavail=3614108 print_time=14456.762 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.2 pwm=0.000 | |
| Stats 617033.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7025437 bytes_read=7490233 bytes_retransmit=9 bytes_invalid=0 send_seq=263824 receive_seq=263824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003667 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.7 chamber_heater: target=55 temp=55.3 pwm=0.000 sysload=1.52 cputime=6657.199 memavail=3614404 print_time=14457.062 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.1 pwm=0.000 | |
| Stats 617034.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7027249 bytes_read=7491124 bytes_retransmit=9 bytes_invalid=0 send_seq=263880 receive_seq=263880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.343 z_thermal_adjust: temp=57.8 chamber_heater: target=55 temp=55.3 pwm=0.850 sysload=1.52 cputime=6657.281 memavail=3614272 print_time=14458.062 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.3 pwm=0.000 | |
| probe at 259.909,174.972 is z=-2.140000 | |
| Stats 617035.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7029592 bytes_read=7492096 bytes_retransmit=9 bytes_invalid=0 send_seq=263945 receive_seq=263945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003689 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.343 z_thermal_adjust: temp=57.8 chamber_heater: target=55 temp=55.3 pwm=0.448 sysload=1.52 cputime=6657.373 memavail=3614180 print_time=14459.045 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.9 pwm=0.000 | |
| probe at 259.909,174.972 is z=-2.140625 | |
| Stats 617036.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7032025 bytes_read=7493098 bytes_retransmit=9 bytes_invalid=0 send_seq=264013 receive_seq=264013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003682 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.343 z_thermal_adjust: temp=57.8 chamber_heater: target=55 temp=55.4 pwm=0.006 sysload=1.64 cputime=6657.471 memavail=3614204 print_time=14460.082 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.8 pwm=0.000 | |
| probe at 259.909,174.972 is z=-2.140000 | |
| Stats 617037.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7034374 bytes_read=7494064 bytes_retransmit=9 bytes_invalid=0 send_seq=264081 receive_seq=264081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.8 chamber_heater: target=55 temp=55.3 pwm=1.000 sysload=1.64 cputime=6657.570 memavail=3614260 print_time=14461.068 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.1 pwm=0.000 | |
| probe at 259.909,174.972 is z=-2.141875 | |
| Stats 617038.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7036807 bytes_read=7495063 bytes_retransmit=9 bytes_invalid=0 send_seq=264149 receive_seq=264149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003607 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.8 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=1.64 cputime=6657.677 memavail=3614220 print_time=14462.623 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.1 pwm=0.000 | |
| Stats 617039.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7037726 bytes_read=7495714 bytes_retransmit=9 bytes_invalid=0 send_seq=264179 receive_seq=264179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003620 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=1.64 cputime=6657.741 memavail=3614168 print_time=14463.073 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.9 pwm=0.000 | |
| Stats 617040.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7039499 bytes_read=7496616 bytes_retransmit=9 bytes_invalid=0 send_seq=264234 receive_seq=264234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=180003689 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.292 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.720 sysload=1.64 cputime=6657.825 memavail=3614232 print_time=14464.073 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.8 pwm=0.000 | |
| probe at 217.619,174.969 is z=-2.215000 | |
| Stats 617041.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7041875 bytes_read=7497582 bytes_retransmit=9 bytes_invalid=0 send_seq=264301 receive_seq=264301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003660 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.318 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=1.75 cputime=6657.919 memavail=3614280 print_time=14465.063 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.1 pwm=0.000 | |
| probe at 217.619,174.969 is z=-2.218125 | |
| Stats 617042.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7044310 bytes_read=7498597 bytes_retransmit=9 bytes_invalid=0 send_seq=264369 receive_seq=264369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003678 sd_pos=16280 heater_bed: target=105 temp=104.9 pwm=0.318 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.660 sysload=1.75 cputime=6658.015 memavail=3614192 print_time=14466.096 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.3 pwm=0.000 | |
| probe at 217.619,174.969 is z=-2.231250 | |
| Stats 617043.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7046672 bytes_read=7499582 bytes_retransmit=9 bytes_invalid=0 send_seq=264437 receive_seq=264437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003634 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.318 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.193 sysload=1.75 cputime=6658.114 memavail=3614216 print_time=14467.083 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.6 pwm=0.000 | |
| probe at 217.619,174.969 is z=-2.231875 | |
| Stats 617044.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7048878 bytes_read=7500565 bytes_retransmit=9 bytes_invalid=0 send_seq=264502 receive_seq=264502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003653 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.318 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.5 pwm=0.150 sysload=1.75 cputime=6658.219 memavail=3614272 print_time=14468.490 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.2 pwm=0.000 | |
| Stats 617045.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7049998 bytes_read=7501284 bytes_retransmit=9 bytes_invalid=0 send_seq=264540 receive_seq=264540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003748 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.255 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=1.75 cputime=6658.286 memavail=3614256 print_time=14469.090 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.9 pwm=0.000 | |
| Stats 617046.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7051825 bytes_read=7502186 bytes_retransmit=9 bytes_invalid=0 send_seq=264601 receive_seq=264601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003677 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.255 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.5 pwm=0.423 sysload=1.93 cputime=6658.371 memavail=3614340 print_time=14470.090 buffer_time=0.000 print_stall=5 extruder: target=0 temp=74.1 pwm=0.000 | |
| probe at 175.331,174.969 is z=-2.307500 | |
| Stats 617047.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7053937 bytes_read=7503089 bytes_retransmit=9 bytes_invalid=0 send_seq=264661 receive_seq=264661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003612 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.255 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.368 sysload=1.93 cputime=6658.462 memavail=3614300 print_time=14471.096 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.4 pwm=0.000 | |
| probe at 175.331,174.969 is z=-2.336250 | |
| Stats 617048.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7056327 bytes_read=7504094 bytes_retransmit=9 bytes_invalid=0 send_seq=264727 receive_seq=264727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003661 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.255 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.007 sysload=1.93 cputime=6658.558 memavail=3614300 print_time=14472.081 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.6 pwm=0.000 | |
| probe at 175.331,174.969 is z=-2.343125 | |
| Stats 617049.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7058718 bytes_read=7505093 bytes_retransmit=9 bytes_invalid=0 send_seq=264795 receive_seq=264795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003758 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.322 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=1.93 cputime=6658.654 memavail=3614324 print_time=14473.069 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.5 pwm=0.000 | |
| probe at 175.331,174.969 is z=-2.346250 | |
| Stats 617050.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7061034 bytes_read=7506070 bytes_retransmit=9 bytes_invalid=0 send_seq=264861 receive_seq=264861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.322 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.342 sysload=1.93 cputime=6658.762 memavail=3614236 print_time=14474.529 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.7 pwm=0.000 | |
| Stats 617051.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7062068 bytes_read=7506759 bytes_retransmit=9 bytes_invalid=0 send_seq=264894 receive_seq=264893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003689 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.266 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.512 sysload=2.10 cputime=6658.828 memavail=3614236 print_time=14475.079 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.5 pwm=0.000 | |
| Stats 617052.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7063882 bytes_read=7507631 bytes_retransmit=9 bytes_invalid=0 send_seq=264948 receive_seq=264948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003635 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.266 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.996 sysload=2.10 cputime=6658.912 memavail=3614260 print_time=14476.079 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.3 pwm=0.000 | |
| probe at 133.041,174.972 is z=-2.589375 | |
| Stats 617053.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7066243 bytes_read=7508597 bytes_retransmit=9 bytes_invalid=0 send_seq=265015 receive_seq=265015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003704 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.266 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.786 sysload=2.10 cputime=6659.004 memavail=3614148 print_time=14477.060 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.1 pwm=0.000 | |
| probe at 133.041,174.972 is z=-2.601250 | |
| Stats 617054.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7068637 bytes_read=7509621 bytes_retransmit=9 bytes_invalid=0 send_seq=265082 receive_seq=265082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003766 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.266 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.349 sysload=2.10 cputime=6659.103 memavail=3614164 print_time=14478.097 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.3 pwm=0.000 | |
| probe at 133.041,174.972 is z=-2.606875 | |
| Stats 617055.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7071006 bytes_read=7510617 bytes_retransmit=9 bytes_invalid=0 send_seq=265149 receive_seq=265149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003727 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.292 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=2.10 cputime=6659.200 memavail=3614284 print_time=14479.087 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.3 pwm=0.000 | |
| probe at 133.041,174.972 is z=-2.603125 | |
| Stats 617056.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7073137 bytes_read=7511544 bytes_retransmit=9 bytes_invalid=0 send_seq=265211 receive_seq=265211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003684 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.292 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.157 sysload=2.17 cputime=6659.301 memavail=3614196 print_time=14480.451 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.3 pwm=0.000 | |
| Stats 617057.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7074298 bytes_read=7512277 bytes_retransmit=9 bytes_invalid=0 send_seq=265249 receive_seq=265249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.292 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.776 sysload=2.17 cputime=6659.372 memavail=3614100 print_time=14481.101 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.3 pwm=0.000 | |
| Stats 617058.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7076164 bytes_read=7513174 bytes_retransmit=9 bytes_invalid=0 send_seq=265309 receive_seq=265309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003684 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.236 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.2 pwm=0.952 sysload=2.17 cputime=6659.459 memavail=3614144 print_time=14482.101 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.0 pwm=0.000 | |
| probe at 90.750,174.969 is z=-2.750625 | |
| Stats 617059.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7078293 bytes_read=7514087 bytes_retransmit=9 bytes_invalid=0 send_seq=265371 receive_seq=265371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003606 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.236 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.000 sysload=2.17 cputime=6659.551 memavail=3614132 print_time=14483.107 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.4 pwm=0.000 | |
| probe at 90.750,174.969 is z=-2.773750 | |
| Stats 617060.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7080409 bytes_read=7515033 bytes_retransmit=9 bytes_invalid=0 send_seq=265431 receive_seq=265431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003630 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.236 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.2 pwm=0.995 sysload=2.17 cputime=6659.642 memavail=3614348 print_time=14484.064 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.1 pwm=0.000 | |
| probe at 90.750,174.969 is z=-2.760000 | |
| Stats 617061.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7082691 bytes_read=7515995 bytes_retransmit=9 bytes_invalid=0 send_seq=265495 receive_seq=265495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003613 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.236 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.037 sysload=2.24 cputime=6659.741 memavail=3614196 print_time=14485.102 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.6 pwm=0.000 | |
| probe at 90.750,174.969 is z=-2.764375 | |
| Stats 617062.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7085293 bytes_read=7517014 bytes_retransmit=9 bytes_invalid=0 send_seq=265567 receive_seq=265567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003559 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.236 z_thermal_adjust: temp=57.9 chamber_heater: target=55 temp=55.3 pwm=0.295 sysload=2.24 cputime=6659.851 memavail=3614388 print_time=14486.665 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.1 pwm=0.000 | |
| Stats 617063.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7086198 bytes_read=7517665 bytes_retransmit=9 bytes_invalid=0 send_seq=265597 receive_seq=265597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003567 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.244 z_thermal_adjust: temp=58.0 chamber_heater: target=55 temp=55.3 pwm=0.423 sysload=2.24 cputime=6659.915 memavail=3614512 print_time=14487.065 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.0 pwm=0.000 | |
| Stats 617064.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7088048 bytes_read=7518542 bytes_retransmit=9 bytes_invalid=0 send_seq=265654 receive_seq=265653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.244 z_thermal_adjust: temp=58.0 chamber_heater: target=55 temp=55.2 pwm=1.000 sysload=2.24 cputime=6660.002 memavail=3614512 print_time=14488.115 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.9 pwm=0.000 | |
| probe at 90.750,211.581 is z=-2.516250 | |
| Stats 617065.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7090194 bytes_read=7519484 bytes_retransmit=9 bytes_invalid=0 send_seq=265715 receive_seq=265715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003529 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.245 z_thermal_adjust: temp=58.0 chamber_heater: target=55 temp=55.2 pwm=0.685 sysload=2.24 cputime=6660.093 memavail=3614584 print_time=14489.078 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| probe at 90.750,211.581 is z=-2.522500 | |
| Stats 617066.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7092185 bytes_read=7520445 bytes_retransmit=9 bytes_invalid=0 send_seq=265775 receive_seq=265775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003545 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.313 z_thermal_adjust: temp=58.1 chamber_heater: target=55 temp=55.2 pwm=0.946 sysload=2.30 cputime=6660.195 memavail=3614624 print_time=14490.085 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.1 pwm=0.000 | |
| probe at 90.750,211.581 is z=-2.525000 | |
| Stats 617067.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7094671 bytes_read=7521478 bytes_retransmit=9 bytes_invalid=0 send_seq=265847 receive_seq=265847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003654 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.255 z_thermal_adjust: temp=58.1 chamber_heater: target=55 temp=55.2 pwm=0.562 sysload=2.30 cputime=6660.297 memavail=3614512 print_time=14491.173 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.1 pwm=0.000 | |
| probe at 90.750,211.581 is z=-2.534375 | |
| Stats 617068.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7097396 bytes_read=7522532 bytes_retransmit=9 bytes_invalid=0 send_seq=265923 receive_seq=265923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003641 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.255 z_thermal_adjust: temp=58.1 chamber_heater: target=55 temp=55.1 pwm=0.956 sysload=2.30 cputime=6660.409 memavail=3614496 print_time=14492.892 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| Stats 617069.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7098050 bytes_read=7523096 bytes_retransmit=9 bytes_invalid=0 send_seq=265947 receive_seq=265947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003666 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.255 z_thermal_adjust: temp=58.1 chamber_heater: target=55 temp=55.2 pwm=0.414 sysload=2.30 cputime=6660.466 memavail=3614536 print_time=14493.092 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.6 pwm=0.000 | |
| Stats 617070.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7099745 bytes_read=7523963 bytes_retransmit=9 bytes_invalid=0 send_seq=265998 receive_seq=265998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003770 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.255 z_thermal_adjust: temp=58.1 chamber_heater: target=55 temp=55.2 pwm=0.130 sysload=2.30 cputime=6660.549 memavail=3614172 print_time=14494.092 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.5 pwm=0.000 | |
| probe at 133.041,211.578 is z=-3.026250 | |
| Stats 617071.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7102195 bytes_read=7524978 bytes_retransmit=9 bytes_invalid=0 send_seq=266069 receive_seq=266069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003844 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.623 sysload=2.27 cputime=6660.645 memavail=3614188 print_time=14495.080 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.4 pwm=0.000 | |
| probe at 133.041,211.578 is z=-3.037500 | |
| Stats 617072.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7104367 bytes_read=7525962 bytes_retransmit=9 bytes_invalid=0 send_seq=266131 receive_seq=266131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003766 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.312 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.0 pwm=1.000 sysload=2.27 cputime=6660.747 memavail=3614244 print_time=14496.072 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| probe at 133.041,211.578 is z=-3.032500 | |
| Stats 617073.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7106875 bytes_read=7526990 bytes_retransmit=9 bytes_invalid=0 send_seq=266202 receive_seq=266202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003777 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.312 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.582 sysload=2.27 cputime=6660.849 memavail=3614344 print_time=14497.163 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.0 pwm=0.000 | |
| probe at 133.041,211.578 is z=-3.023750 | |
| Stats 617074.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7109620 bytes_read=7528029 bytes_retransmit=9 bytes_invalid=0 send_seq=266275 receive_seq=266275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003757 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.100 sysload=2.27 cputime=6660.964 memavail=3614320 print_time=14498.893 buffer_time=0.000 print_stall=5 extruder: target=0 temp=73.0 pwm=0.000 | |
| Stats 617075.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7110273 bytes_read=7528609 bytes_retransmit=9 bytes_invalid=0 send_seq=266299 receive_seq=266299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.275 sysload=2.27 cputime=6661.022 memavail=3614280 print_time=14499.093 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| Stats 617076.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7111991 bytes_read=7529476 bytes_retransmit=9 bytes_invalid=0 send_seq=266353 receive_seq=266353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003802 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.462 sysload=2.25 cputime=6661.104 memavail=3614272 print_time=14500.093 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.8 pwm=0.000 | |
| probe at 175.331,211.581 is z=-2.480625 | |
| Stats 617077.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7114254 bytes_read=7530438 bytes_retransmit=9 bytes_invalid=0 send_seq=266419 receive_seq=266419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003731 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.291 z_thermal_adjust: temp=58.2 chamber_heater: target=55 temp=55.1 pwm=0.272 sysload=2.25 cputime=6661.198 memavail=3614216 print_time=14501.101 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| probe at 175.331,211.581 is z=-2.495625 | |
| Stats 617078.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7116492 bytes_read=7531451 bytes_retransmit=9 bytes_invalid=0 send_seq=266484 receive_seq=266484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003731 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.238 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.505 sysload=2.25 cputime=6661.299 memavail=3614144 print_time=14502.093 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.8 pwm=0.000 | |
| probe at 175.331,211.581 is z=-2.503125 | |
| Stats 617079.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7118955 bytes_read=7532474 bytes_retransmit=9 bytes_invalid=0 send_seq=266554 receive_seq=266554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=180003653 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.238 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.232 sysload=2.25 cputime=6661.400 memavail=3614296 print_time=14503.228 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.7 pwm=0.000 | |
| probe at 175.331,211.581 is z=-2.511875 | |
| Stats 617080.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7121707 bytes_read=7533533 bytes_retransmit=9 bytes_invalid=0 send_seq=266629 receive_seq=266628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003697 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.238 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.000 sysload=2.25 cputime=6661.513 memavail=3614168 print_time=14504.942 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.8 pwm=0.000 | |
| Stats 617081.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7122276 bytes_read=7534078 bytes_retransmit=9 bytes_invalid=0 send_seq=266651 receive_seq=266651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.238 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.313 sysload=2.23 cputime=6661.571 memavail=3614344 print_time=14505.092 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.5 pwm=0.000 | |
| Stats 617082.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7124014 bytes_read=7534969 bytes_retransmit=9 bytes_invalid=0 send_seq=266707 receive_seq=266707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003600 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.204 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.323 sysload=2.23 cputime=6661.654 memavail=3614224 print_time=14506.092 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.3 pwm=0.000 | |
| probe at 217.619,211.581 is z=-3.273125 | |
| Stats 617083.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7126128 bytes_read=7535929 bytes_retransmit=9 bytes_invalid=0 send_seq=266770 receive_seq=266770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003682 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.264 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.1 pwm=0.449 sysload=2.23 cputime=6661.756 memavail=3614208 print_time=14507.101 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.6 pwm=0.000 | |
| probe at 217.619,211.581 is z=-3.272500 | |
| Stats 617084.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7128593 bytes_read=7536941 bytes_retransmit=9 bytes_invalid=0 send_seq=266840 receive_seq=266840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=180003672 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.264 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.2 pwm=0.444 sysload=2.23 cputime=6661.860 memavail=3614144 print_time=14508.407 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.1 pwm=0.000 | |
| Stats 617085.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7129813 bytes_read=7537674 bytes_retransmit=9 bytes_invalid=0 send_seq=266880 receive_seq=266880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003621 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.264 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.2 pwm=0.000 sysload=2.23 cputime=6661.931 memavail=3614224 print_time=14509.107 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.3 pwm=0.000 | |
| probe at 217.619,211.581 is z=-3.270625 | |
| Stats 617086.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7131927 bytes_read=7538563 bytes_retransmit=9 bytes_invalid=0 send_seq=266937 receive_seq=266937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=180003550 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.315 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.2 pwm=0.268 sysload=2.21 cputime=6662.022 memavail=3614256 print_time=14510.114 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.2 pwm=0.000 | |
| probe at 217.619,211.581 is z=-3.268125 | |
| Stats 617087.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7133982 bytes_read=7539509 bytes_retransmit=9 bytes_invalid=0 send_seq=266997 receive_seq=266997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003585 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.315 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.2 pwm=0.457 sysload=2.21 cputime=6662.126 memavail=3614288 print_time=14511.612 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.4 pwm=0.000 | |
| Stats 617088.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7134953 bytes_read=7540149 bytes_retransmit=9 bytes_invalid=0 send_seq=267028 receive_seq=267028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003605 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.315 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.3 pwm=0.340 sysload=2.21 cputime=6662.191 memavail=3614296 print_time=14512.112 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.2 pwm=0.000 | |
| Stats 617089.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7136762 bytes_read=7541037 bytes_retransmit=9 bytes_invalid=0 send_seq=267086 receive_seq=267086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003561 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.315 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.3 pwm=0.170 sysload=2.21 cputime=6662.277 memavail=3614304 print_time=14513.112 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.2 pwm=0.000 | |
| probe at 259.909,211.578 is z=-3.445625 | |
| Stats 617090.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7138892 bytes_read=7541984 bytes_retransmit=9 bytes_invalid=0 send_seq=267146 receive_seq=267146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003492 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.315 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=2.21 cputime=6662.370 memavail=3614188 print_time=14514.118 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.4 pwm=0.000 | |
| probe at 259.909,211.578 is z=-3.444375 | |
| Stats 617091.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7140825 bytes_read=7542909 bytes_retransmit=9 bytes_invalid=0 send_seq=267202 receive_seq=267202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003449 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.244 z_thermal_adjust: temp=58.3 chamber_heater: target=55 temp=55.4 pwm=0.000 sysload=2.28 cputime=6662.467 memavail=3614244 print_time=14515.125 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.6 pwm=0.000 | |
| probe at 259.909,211.578 is z=-3.448125 | |
| Stats 617092.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7143248 bytes_read=7543923 bytes_retransmit=9 bytes_invalid=0 send_seq=267270 receive_seq=267270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=180003381 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.244 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.4 pwm=0.230 sysload=2.28 cputime=6662.573 memavail=3614308 print_time=14516.431 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.0 pwm=0.000 | |
| Stats 617093.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7144504 bytes_read=7544641 bytes_retransmit=9 bytes_invalid=0 send_seq=267308 receive_seq=267308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003427 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.312 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=2.28 cputime=6662.646 memavail=3614160 print_time=14517.131 buffer_time=0.000 print_stall=5 extruder: target=0 temp=72.5 pwm=0.000 | |
| probe at 259.909,211.578 is z=-3.450625 | |
| Mesh Bed Leveling Complete | |
| save_config: set [bed_mesh default] version = 1 | |
| save_config: set [bed_mesh default] points = | |
| -0.195938, -0.375938, -0.476250, -0.674375, -0.814063 | |
| -1.602188, -1.442188, -1.179688, -1.064688, -0.980313 | |
| -1.363750, -1.869375, -1.339375, -2.111563, -2.286875 | |
| save_config: set [bed_mesh default] x_count = 5 | |
| save_config: set [bed_mesh default] y_count = 3 | |
| save_config: set [bed_mesh default] mesh_x_pps = 2 | |
| save_config: set [bed_mesh default] mesh_y_pps = 2 | |
| save_config: set [bed_mesh default] algo = lagrange | |
| save_config: set [bed_mesh default] tension = 0.2 | |
| save_config: set [bed_mesh default] min_x = 90.75 | |
| save_config: set [bed_mesh default] max_x = 259.91 | |
| save_config: set [bed_mesh default] min_y = 138.36 | |
| save_config: set [bed_mesh default] max_y = 211.58 | |
| Bed Mesh state has been saved to profile [default] | |
| for the current session. The SAVE_CONFIG command will | |
| update the printer config file and restart the printer. | |
| Unknown command:"POST_PROBE" | |
| Heater extruder approaching new target of 250.000 | |
| Stats 617094.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7146523 bytes_read=7545491 bytes_retransmit=9 bytes_invalid=0 send_seq=267363 receive_seq=267363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003549 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.312 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.4 pwm=0.357 sysload=2.28 cputime=6662.746 memavail=3614320 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=72.2 pwm=1.000 | |
| Stats 617095.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7146737 bytes_read=7545997 bytes_retransmit=9 bytes_invalid=0 send_seq=267378 receive_seq=267378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003497 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.312 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=2.28 cputime=6662.802 memavail=3614308 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=72.6 pwm=1.000 | |
| Stats 617096.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7146946 bytes_read=7546497 bytes_retransmit=9 bytes_invalid=0 send_seq=267392 receive_seq=267392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003514 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.259 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=2.25 cputime=6662.855 memavail=3614492 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=72.7 pwm=1.000 | |
| Stats 617097.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7147120 bytes_read=7546977 bytes_retransmit=9 bytes_invalid=0 send_seq=267405 receive_seq=267405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003550 sd_pos=16280 heater_bed: target=105 temp=105.0 pwm=0.259 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.5 pwm=0.000 sysload=2.25 cputime=6662.909 memavail=3614220 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=73.1 pwm=1.000 | |
| Stats 617098.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7147310 bytes_read=7547463 bytes_retransmit=9 bytes_invalid=0 send_seq=267419 receive_seq=267419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003523 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.259 z_thermal_adjust: temp=58.4 chamber_heater: target=55 temp=55.6 pwm=0.000 sysload=2.25 cputime=6662.962 memavail=3614292 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=74.2 pwm=1.000 | |
| Stats 617099.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=7147510 bytes_read=7547963 bytes_retransmit=9 bytes_invalid=0 send_seq=267433 receive_seq=267433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003529 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.259 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.050 sysload=2.25 cputime=6663.016 memavail=3614460 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=75.3 pwm=1.000 | |
| Stats 617100.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7147742 bytes_read=7548473 bytes_retransmit=9 bytes_invalid=0 send_seq=267449 receive_seq=267449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003591 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.247 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.192 sysload=2.25 cputime=6663.071 memavail=3614292 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=77.2 pwm=1.000 | |
| Stats 617101.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7147943 bytes_read=7548959 bytes_retransmit=9 bytes_invalid=0 send_seq=267463 receive_seq=267463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003644 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.247 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.218 sysload=2.31 cputime=6663.124 memavail=3614396 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=79.1 pwm=1.000 | |
| Stats 617102.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7148175 bytes_read=7549483 bytes_retransmit=9 bytes_invalid=0 send_seq=267479 receive_seq=267479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003606 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.247 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.144 sysload=2.31 cputime=6663.182 memavail=3608448 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=81.4 pwm=1.000 | |
| Stats 617103.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7148386 bytes_read=7549954 bytes_retransmit=9 bytes_invalid=0 send_seq=267493 receive_seq=267493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003554 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.256 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.011 sysload=2.31 cputime=6663.236 memavail=3613472 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=83.6 pwm=1.000 | |
| Stats 617104.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7148587 bytes_read=7550440 bytes_retransmit=9 bytes_invalid=0 send_seq=267507 receive_seq=267507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003493 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.256 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.224 sysload=2.31 cputime=6663.290 memavail=3613464 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=85.9 pwm=1.000 | |
| Stats 617105.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7148817 bytes_read=7550979 bytes_retransmit=9 bytes_invalid=0 send_seq=267523 receive_seq=267523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003608 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.256 z_thermal_adjust: temp=58.5 chamber_heater: target=55 temp=55.6 pwm=0.144 sysload=2.31 cputime=6663.345 memavail=3613416 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=89.2 pwm=1.000 | |
| Stats 617106.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7149060 bytes_read=7551481 bytes_retransmit=9 bytes_invalid=0 send_seq=267541 receive_seq=267541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003635 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.256 z_thermal_adjust: temp=58.6 chamber_heater: target=55 temp=55.6 pwm=0.009 sysload=2.29 cputime=6663.400 memavail=3613536 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=91.7 pwm=1.000 | |
| Stats 617107.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7149288 bytes_read=7551969 bytes_retransmit=9 bytes_invalid=0 send_seq=267556 receive_seq=267556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003743 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.261 z_thermal_adjust: temp=58.6 chamber_heater: target=55 temp=55.6 pwm=0.359 sysload=2.29 cputime=6663.454 memavail=3613472 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=94.4 pwm=1.000 | |
| Stats 617108.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7149497 bytes_read=7552467 bytes_retransmit=9 bytes_invalid=0 send_seq=267570 receive_seq=267570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003785 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.261 z_thermal_adjust: temp=58.6 chamber_heater: target=55 temp=55.6 pwm=0.000 sysload=2.29 cputime=6663.507 memavail=3613632 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=98.1 pwm=1.000 | |
| Stats 617109.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7149700 bytes_read=7552942 bytes_retransmit=9 bytes_invalid=0 send_seq=267585 receive_seq=267585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.261 z_thermal_adjust: temp=58.6 chamber_heater: target=55 temp=55.6 pwm=0.000 sysload=2.29 cputime=6663.558 memavail=3613736 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=101.3 pwm=1.000 | |
| Stats 617110.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7149917 bytes_read=7553448 bytes_retransmit=9 bytes_invalid=0 send_seq=267600 receive_seq=267600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003718 sd_pos=16280 heater_bed: target=105 temp=105.1 pwm=0.261 z_thermal_adjust: temp=58.6 chamber_heater: target=55 temp=55.6 pwm=0.196 sysload=2.29 cputime=6663.611 memavail=3613632 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=104.1 pwm=1.000 | |
| Stats 617111.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7150172 bytes_read=7553972 bytes_retransmit=9 bytes_invalid=0 send_seq=267616 receive_seq=267616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003657 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.202 z_thermal_adjust: temp=58.7 chamber_heater: target=55 temp=55.6 pwm=0.215 sysload=2.26 cputime=6663.668 memavail=3613536 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=108.3 pwm=1.000 | |
| Transition to shutdown state: Shutdown due to webhooks request | |
| Dumping gcode input 0 blocks | |
| Dumping 20 requests for client 547876391120 | |
| Received 603838.631572: b'{"id": 548297261968, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 603839.315803: b'{"id": 548296971472, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 603839.691702: b'{"id": 547984057296, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 603840.007493: b'{"id": 548297277200, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 614642.549422: b'{"id": 547974973584, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Cover_ABS_51m4s.gcode\\""}}' | |
| Received 615918.347172: b'{"id": 547984071376, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 615918.536174: b'{"id": 547964812432, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 615918.752465: b'{"id": 548297238928, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 615918.924075: b'{"id": 547984043280, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 615920.077256: b'{"id": 548298748432, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 615920.257657: b'{"id": 548297265488, "method": "gcode/script", "params": {"script": "SET_GCODE_OFFSET Z_ADJUST=+0.05 MOVE=1"}}' | |
| Received 616155.622607: b'{"id": 547974536976, "method": "gcode/script", "params": {"script": "M221 S115"}}' | |
| Received 616364.876236: b'{"id": 548300897232, "method": "pause_resume/pause", "params": {}}' | |
| Received 616365.733384: b'{"id": 548298806608, "method": "pause_resume/cancel", "params": {}}' | |
| Received 616429.352446: b'{"id": 548298523024, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=250"}}' | |
| Received 616706.621112: b'{"id": 548296981968, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0"}}' | |
| Received 616732.936263: b'{"id": 548298565008, "method": "gcode/script", "params": {"script": "G28"}}' | |
| Received 616747.985794: b'{"id": 548297166480, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"Cover_ABS_51m4s.gcode\\""}}' | |
| Received 617106.870607: b'{"id": 547984063440, "method": "pause_resume/pause", "params": {}}' | |
| Received 617112.489632: b'{"id": 547984080528, "method": "emergency_stop", "params": {}}' | |
| Virtual sdcard (15256): '44.258],[252.071,144.33],[252.348,144.429],[252.614,144.555],[252.867,144.706],[253.103,144.881],[253.321,145.079],[253.519,145.297],[253.695,145.534],[253.846,145.786],[253.972,146.052],[254.071,146.33],[254.142,146.615],[254.186,146.906],[254.2,147.2],[254.2,186.8],[254.186,187.094],[254.142,187.385],[254.071,187.671],[253.972,187.948],[247.959,203.168],[247.825,203.491],[247.664,203.8],[247.477,204.094],[247.264,204.371],[247.028,204.629],[246.771,204.864],[246.494,205.077],[246.2,205.264],[245.89,205.425],[245.568,205.559],[245.235,205.664],[244.895,205.739],[244.549,205.785],[244.2,205.8],[232.2,205.8],[117.8,205.8],[105.8,205.8],[105.451,205.784],[105.451,205.784],[105.105,205.739],[104.764,205.663],[104.432,205.558],[104.109,205.425],[103.8,205.264],[103.505,205.076],[103.229,204.864],[102.971,204.628],[102.736,204.371],[102.523,204.094],[102.336,203.8],[102.175,203.49],[102.041,203.168],[96.0283,187.948],[95.9291,187.671],[95.8576,187.385],[95.8144,187.094],[95.7999,186.8]]\r\nM73 P0 R51\r\n;TYPE:Custom\r\n' | |
| Upcoming (16280): 'PRINT_START\r\nG90\r\nG21\r\nM83 ; use relative distances for extrusion\r\n; Filament gcode\r\nM106 S0 ; disable fan\r\n;LAYER_CHANGE\r\n;Z:0.' | |
| gcode state: absolute_coord=True absolute_extrude=False base_position=[0.0, 0.0, 0.8000000000000002, 2032.0531665000194] last_position=[259.90937500022534, 211.5781250002372, 11.22638416646795, 2032.0531665000194] homing_position=[0.0, 0.0, 0.8000000000000002, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.15 speed=60.0 | |
| Reactor garbage collection: (616998.416561425, 0.0, 0.0) | |
| MCU 'mcu' shutdown: Command request | |
| clocksync state: mcu_freq=180000000 last_clock=2616449963408 clock_est=(617083.903 2611308999742 180003650.155) min_half_rtt=0.000097 min_rtt_time=616252.672 time_avg=617083.903(843.699) clock_avg=2611308999742.898(151868892333.263) pred_variance=2899320548.428 | |
| Dumping serial stats: bytes_write=7150380 bytes_read=7554460 bytes_retransmit=9 bytes_invalid=0 send_seq=267632 receive_seq=267632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 | |
| Dumping send queue 100 messages | |
| Sent 0 617106.022144 617106.022144 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 1 617106.028191 617106.028191 14: seq: 1d, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 2 617106.034107 617106.034107 14: seq: 1e, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 3 617106.130753 617106.130753 16: seq: 1f, queue_digital_out oid=25 clock=4014524032 on_ticks=5940065 | |
| Sent 4 617106.236399 617106.236399 14: seq: 10, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 5 617106.242122 617106.242122 14: seq: 11, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 6 617106.430812 617106.430812 15: seq: 12, queue_digital_out oid=25 clock=4068524032 on_ticks=167459 | |
| Sent 7 617106.510751 617106.510751 16: seq: 13, queue_digital_out oid=33 clock=4082924032 on_ticks=18000000 | |
| Sent 8 617106.555717 617106.555717 6: seq: 14, get_clock | |
| Sent 9 617106.565002 617106.565002 14: seq: 15, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 10 617106.571266 617106.571266 14: seq: 16, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 11 617106.579589 617106.579589 14: seq: 17, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 12 617106.584941 617106.584941 14: seq: 18, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 13 617106.730596 617106.730596 16: seq: 19, queue_digital_out oid=25 clock=4122524032 on_ticks=3665200 | |
| Sent 14 617106.873904 617106.873904 14: seq: 1a, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 15 617106.879942 617106.879942 14: seq: 1b, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10 | |
| Sent 16 617107.017675 617107.017675 25: seq: 1c, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=25 clock=4176524032 on_ticks=2342181 | |
| Sent 17 617107.023148 617107.023148 14: seq: 1d, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 18 617107.028916 617107.028916 14: seq: 1e, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 19 617107.035067 617107.035067 14: seq: 1f, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 20 617107.237752 617107.237752 14: seq: 10, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 21 617107.244291 617107.244291 14: seq: 11, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 22 617107.330838 617107.330838 16: seq: 12, queue_digital_out oid=25 clock=4230524031 on_ticks=6457949 | |
| Sent 23 617107.540772 617107.540772 17: seq: 13, get_clock, queue_digital_out oid=20 clock=4275524031 on_ticks=4692817 | |
| Sent 24 617107.565456 617107.565456 14: seq: 14, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 25 617107.570840 617107.570840 14: seq: 15, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 26 617107.580292 617107.580292 25: seq: 16, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=25 clock=4284524032 on_ticks=13162095 | |
| Sent 27 617107.586132 617107.586132 14: seq: 17, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 28 617107.875110 617107.875110 14: seq: 18, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 29 617107.881033 617107.881033 25: seq: 19, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10, queue_digital_out oid=25 clock=43556736 on_ticks=6532819 | |
| Sent 30 617108.018790 617108.018790 14: seq: 1a, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 31 617108.025086 617108.025086 14: seq: 1b, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 32 617108.031095 617108.031095 14: seq: 1c, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 33 617108.036907 617108.036907 14: seq: 1d, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 34 617108.230966 617108.230966 13: seq: 1e, queue_digital_out oid=25 clock=97556736 on_ticks=0 | |
| Sent 35 617108.238510 617108.238510 14: seq: 1f, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 36 617108.244115 617108.244115 14: seq: 10, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 37 617108.525052 617108.525052 6: seq: 11, get_clock | |
| Sent 38 617108.566000 617108.566000 14: seq: 12, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 39 617108.572399 617108.572399 14: seq: 13, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 40 617108.580496 617108.580496 14: seq: 14, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 41 617108.586321 617108.586321 14: seq: 15, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 42 617108.830618 617108.830618 16: seq: 16, queue_digital_out oid=25 clock=205556735 on_ticks=5220487 | |
| Sent 43 617108.876160 617108.876160 14: seq: 17, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 44 617108.882103 617108.882103 14: seq: 18, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10 | |
| Sent 45 617109.019544 617109.019544 14: seq: 19, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 46 617109.025106 617109.025106 14: seq: 1a, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 47 617109.031025 617109.031025 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 48 617109.037160 617109.037160 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 49 617109.130741 617109.130741 13: seq: 1d, queue_digital_out oid=25 clock=259556736 on_ticks=0 | |
| Sent 50 617109.239610 617109.239610 14: seq: 1e, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 51 617109.244955 617109.244955 14: seq: 1f, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 52 617109.509695 617109.509695 6: seq: 10, get_clock | |
| Sent 53 617109.566838 617109.566838 14: seq: 11, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 54 617109.572977 617109.572977 14: seq: 12, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 55 617109.582299 617109.582299 14: seq: 13, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 56 617109.588125 617109.588125 14: seq: 14, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 57 617109.730617 617109.730617 16: seq: 15, queue_digital_out oid=25 clock=367556736 on_ticks=8243480 | |
| Sent 58 617109.877163 617109.877163 14: seq: 16, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 59 617109.882873 617109.882873 14: seq: 17, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10 | |
| Sent 60 617110.020580 617110.020580 25: seq: 18, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=25 clock=421556736 on_ticks=1776169 | |
| Sent 61 617110.026423 617110.026423 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 62 617110.031987 617110.031987 14: seq: 1a, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 63 617110.038111 617110.038111 14: seq: 1b, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 64 617110.240562 617110.240562 14: seq: 1c, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 65 617110.246033 617110.246033 14: seq: 1d, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 66 617110.331002 617110.331002 16: seq: 1e, queue_digital_out oid=25 clock=475556735 on_ticks=3525454 | |
| Sent 67 617110.494166 617110.494166 6: seq: 1f, get_clock | |
| Sent 68 617110.567692 617110.567692 14: seq: 10, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 69 617110.573010 617110.573010 14: seq: 11, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 70 617110.582607 617110.582607 25: seq: 12, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=25 clock=529556736 on_ticks=6021838 | |
| Sent 71 617110.588315 617110.588315 14: seq: 13, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 72 617110.710300 617110.710300 16: seq: 14, queue_digital_out oid=33 clock=543956736 on_ticks=18000000 | |
| Sent 73 617110.877579 617110.877579 25: seq: 15, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=20 clock=574556736 on_ticks=3644821 | |
| Sent 74 617110.883254 617110.883254 25: seq: 16, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10, queue_digital_out oid=25 clock=583556736 on_ticks=3996725 | |
| Sent 75 617111.021748 617111.021748 14: seq: 17, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 76 617111.028138 617111.028138 14: seq: 18, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 77 617111.034161 617111.034161 14: seq: 19, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 78 617111.040177 617111.040177 14: seq: 1a, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 79 617111.230868 617111.230868 16: seq: 1b, queue_digital_out oid=25 clock=637556736 on_ticks=7622648 | |
| Sent 80 617111.241708 617111.241708 14: seq: 1c, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 81 617111.247116 617111.247116 14: seq: 1d, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 82 617111.478578 617111.478578 6: seq: 1e, get_clock | |
| Sent 83 617111.530919 617111.530919 16: seq: 1f, queue_digital_out oid=25 clock=691556736 on_ticks=3869486 | |
| Sent 84 617111.568457 617111.568457 14: seq: 10, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 85 617111.574314 617111.574314 14: seq: 11, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10 | |
| Sent 86 617111.582936 617111.582936 14: seq: 12, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 87 617111.588966 617111.588966 14: seq: 13, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10 | |
| Sent 88 617111.877942 617111.877942 14: seq: 14, tmcuart_send oid=4 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 89 617111.884650 617111.884650 14: seq: 15, tmcuart_send oid=4 write=b'\xea\x03( \xc3' read=10 | |
| Sent 90 617112.022604 617112.022604 14: seq: 16, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 91 617112.028062 617112.028062 14: seq: 17, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 92 617112.034089 617112.034089 14: seq: 18, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10 | |
| Sent 93 617112.039916 617112.039916 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10 | |
| Sent 94 617112.130778 617112.130778 15: seq: 1a, queue_digital_out oid=25 clock=799556736 on_ticks=1136005 | |
| Sent 95 617112.242697 617112.242697 14: seq: 1b, tmcuart_send oid=5 write=b'\xea\x03\xe8\xad\xe1' read=10 | |
| Sent 96 617112.249288 617112.249288 14: seq: 1c, tmcuart_send oid=5 write=b'\xea\x03( \xc3' read=10 | |
| Sent 97 617112.430881 617112.430881 13: seq: 1d, queue_digital_out oid=25 clock=853556736 on_ticks=0 | |
| Sent 98 617112.463326 617112.463326 6: seq: 1e, get_clock | |
| Sent 99 617112.493281 617112.493281 6: seq: 1f, emergency_stop | |
| Dumping receive queue 100 messages | |
| Receive: 0 617108.779002 617108.586321 15: seq: 16, analog_in_state oid=24 next_clock=204116736 value=28321 | |
| Receive: 1 617108.858976 617108.830618 14: seq: 17, analog_in_state oid=32 next_clock=218516736 value=7447 | |
| Receive: 2 617108.880917 617108.876160 18: seq: 18, tmcuart_response oid=4 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 3 617108.886924 617108.882103 18: seq: 19, tmcuart_response oid=4 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 4 617109.023919 617109.019544 18: seq: 1a, tmcuart_response oid=0 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 5 617109.028915 617109.025106 15: seq: 1b, analog_in_state oid=19 next_clock=249116736 value=18239 | |
| Receive: 6 617109.029881 617109.025106 18: seq: 1b, tmcuart_response oid=1 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 7 617109.036021 617109.031025 18: seq: 1c, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 8 617109.041932 617109.037160 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 9 617109.069021 617109.037160 14: seq: 1d, analog_in_state oid=23 next_clock=256316736 value=11639 | |
| Receive: 10 617109.079068 617109.037160 15: seq: 1d, analog_in_state oid=24 next_clock=258116736 value=28317 | |
| Receive: 11 617109.159115 617109.130741 14: seq: 1e, analog_in_state oid=32 next_clock=272516736 value=7462 | |
| Receive: 12 617109.244004 617109.239610 18: seq: 1f, tmcuart_response oid=5 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 13 617109.249990 617109.244955 18: seq: 10, tmcuart_response oid=5 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 14 617109.328975 617109.244955 15: seq: 10, analog_in_state oid=19 next_clock=303116736 value=18235 | |
| Receive: 15 617109.369069 617109.244955 14: seq: 10, analog_in_state oid=23 next_clock=310316736 value=11634 | |
| Receive: 16 617109.379104 617109.244955 15: seq: 10, analog_in_state oid=24 next_clock=312116736 value=28316 | |
| Receive: 17 617109.458925 617109.244955 14: seq: 10, analog_in_state oid=32 next_clock=326516736 value=7477 | |
| Receive: 18 617109.509959 617109.509695 11: seq: 11, clock clock=283150274 | |
| Receive: 19 617109.568075 617109.566838 15: seq: 12, stats count=460 sum=489316 sumsq=3084435 | |
| Receive: 20 617109.571996 617109.566838 18: seq: 12, tmcuart_response oid=2 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 21 617109.578065 617109.572977 18: seq: 13, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 22 617109.586970 617109.582299 18: seq: 14, tmcuart_response oid=3 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 23 617109.593012 617109.588125 18: seq: 15, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 24 617109.629126 617109.588125 15: seq: 15, analog_in_state oid=19 next_clock=357116736 value=18237 | |
| Receive: 25 617109.669071 617109.588125 14: seq: 15, analog_in_state oid=23 next_clock=364316736 value=11634 | |
| Receive: 26 617109.679093 617109.588125 15: seq: 15, analog_in_state oid=24 next_clock=366116736 value=28322 | |
| Receive: 27 617109.759085 617109.730617 14: seq: 16, analog_in_state oid=32 next_clock=380516736 value=7489 | |
| Receive: 28 617109.881933 617109.877163 18: seq: 17, tmcuart_response oid=4 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 29 617109.887913 617109.882873 18: seq: 18, tmcuart_response oid=4 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 30 617109.929079 617109.882873 15: seq: 18, analog_in_state oid=19 next_clock=411116736 value=18233 | |
| Receive: 31 617109.968931 617109.882873 14: seq: 18, analog_in_state oid=23 next_clock=418316736 value=11631 | |
| Receive: 32 617109.979030 617109.882873 15: seq: 18, analog_in_state oid=24 next_clock=420116736 value=28318 | |
| Receive: 33 617110.025066 617110.020580 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 34 617110.030939 617110.026423 18: seq: 1a, tmcuart_response oid=1 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 35 617110.037060 617110.031987 18: seq: 1b, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 36 617110.042912 617110.038111 18: seq: 1c, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 37 617110.058956 617110.038111 14: seq: 1c, analog_in_state oid=32 next_clock=434516736 value=7506 | |
| Receive: 38 617110.228991 617110.038111 15: seq: 1c, analog_in_state oid=19 next_clock=465116736 value=18233 | |
| Receive: 39 617110.244985 617110.240562 18: seq: 1d, tmcuart_response oid=5 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 40 617110.250921 617110.246033 18: seq: 1e, tmcuart_response oid=5 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 41 617110.269067 617110.246033 14: seq: 1e, analog_in_state oid=23 next_clock=472316736 value=11633 | |
| Receive: 42 617110.279212 617110.246033 15: seq: 1e, analog_in_state oid=24 next_clock=474116736 value=28319 | |
| Receive: 43 617110.358913 617110.331002 14: seq: 1f, analog_in_state oid=32 next_clock=488516736 value=7521 | |
| Receive: 44 617110.494980 617110.494166 11: seq: 10, clock clock=460452886 | |
| Receive: 45 617110.529074 617110.494166 15: seq: 10, analog_in_state oid=19 next_clock=519116736 value=18231 | |
| Receive: 46 617110.568893 617110.567692 14: seq: 11, analog_in_state oid=23 next_clock=526316736 value=11631 | |
| Receive: 47 617110.572025 617110.567692 18: seq: 11, tmcuart_response oid=2 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 48 617110.578099 617110.573010 18: seq: 12, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 49 617110.578947 617110.573010 15: seq: 12, analog_in_state oid=24 next_clock=528116736 value=28321 | |
| Receive: 50 617110.587200 617110.582607 18: seq: 13, tmcuart_response oid=3 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 51 617110.593105 617110.588315 18: seq: 14, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 52 617110.659179 617110.588315 14: seq: 14, analog_in_state oid=32 next_clock=542516736 value=7536 | |
| Receive: 53 617110.829265 617110.710300 15: seq: 15, analog_in_state oid=19 next_clock=573116736 value=18228 | |
| Receive: 54 617110.869119 617110.710300 14: seq: 15, analog_in_state oid=23 next_clock=580316736 value=11627 | |
| Receive: 55 617110.879029 617110.877579 15: seq: 16, analog_in_state oid=24 next_clock=582116736 value=28320 | |
| Receive: 56 617110.882017 617110.877579 18: seq: 16, tmcuart_response oid=4 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 57 617110.887988 617110.883254 18: seq: 17, tmcuart_response oid=4 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 58 617110.959190 617110.883254 14: seq: 17, analog_in_state oid=32 next_clock=596516736 value=7553 | |
| Receive: 59 617111.027000 617111.021748 18: seq: 18, tmcuart_response oid=0 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 60 617111.032905 617111.028138 18: seq: 19, tmcuart_response oid=1 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 61 617111.038987 617111.034161 18: seq: 1a, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 62 617111.044984 617111.040177 18: seq: 1b, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 63 617111.129030 617111.040177 15: seq: 1b, analog_in_state oid=19 next_clock=627116736 value=18226 | |
| Receive: 64 617111.168949 617111.040177 14: seq: 1b, analog_in_state oid=23 next_clock=634316736 value=11626 | |
| Receive: 65 617111.179057 617111.040177 15: seq: 1b, analog_in_state oid=24 next_clock=636116736 value=28323 | |
| Receive: 66 617111.246049 617111.241708 18: seq: 1d, tmcuart_response oid=5 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 67 617111.251990 617111.247116 18: seq: 1e, tmcuart_response oid=5 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 68 617111.259153 617111.247116 14: seq: 1e, analog_in_state oid=32 next_clock=650516736 value=7566 | |
| Receive: 69 617111.428950 617111.247116 15: seq: 1e, analog_in_state oid=19 next_clock=681116736 value=18227 | |
| Receive: 70 617111.469074 617111.247116 14: seq: 1e, analog_in_state oid=23 next_clock=688316736 value=11622 | |
| Receive: 71 617111.479020 617111.247116 15: seq: 1e, analog_in_state oid=24 next_clock=690116736 value=28321 | |
| Receive: 72 617111.479054 617111.478578 11: seq: 1f, clock clock=637578994 | |
| Receive: 73 617111.559099 617111.530919 14: seq: 10, analog_in_state oid=32 next_clock=704516736 value=7587 | |
| Receive: 74 617111.573094 617111.568457 18: seq: 11, tmcuart_response oid=2 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 75 617111.579178 617111.574314 18: seq: 12, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 76 617111.588003 617111.582936 18: seq: 13, tmcuart_response oid=3 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 77 617111.593966 617111.588966 18: seq: 14, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 78 617111.729007 617111.588966 15: seq: 14, analog_in_state oid=19 next_clock=735116736 value=18226 | |
| Receive: 79 617111.769004 617111.588966 14: seq: 14, analog_in_state oid=23 next_clock=742316736 value=11620 | |
| Receive: 80 617111.779007 617111.588966 15: seq: 14, analog_in_state oid=24 next_clock=744116736 value=28321 | |
| Receive: 81 617111.859007 617111.588966 14: seq: 14, analog_in_state oid=32 next_clock=758516736 value=7598 | |
| Receive: 82 617111.883325 617111.877942 18: seq: 15, tmcuart_response oid=4 read=b'\n\xfa\xef-\xc0>\x02\x08\xa0\xf6' | |
| Receive: 83 617111.888951 617111.884650 18: seq: 16, tmcuart_response oid=4 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 84 617112.026926 617112.022604 18: seq: 17, tmcuart_response oid=0 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 85 617112.028964 617112.022604 15: seq: 17, analog_in_state oid=19 next_clock=789116736 value=18230 | |
| Receive: 86 617112.032950 617112.028062 18: seq: 18, tmcuart_response oid=1 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 87 617112.038918 617112.034089 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 88 617112.044910 617112.039916 18: seq: 1a, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 89 617112.068967 617112.039916 14: seq: 1a, analog_in_state oid=23 next_clock=796316736 value=11619 | |
| Receive: 90 617112.079046 617112.039916 15: seq: 1a, analog_in_state oid=24 next_clock=798116736 value=28319 | |
| Receive: 91 617112.159070 617112.130778 14: seq: 1b, analog_in_state oid=32 next_clock=812516736 value=7617 | |
| Receive: 92 617112.247934 617112.242697 18: seq: 1c, tmcuart_response oid=5 read=b'\n\xfa\xef-\xc0\x1e\x02\x08 \xde' | |
| Receive: 93 617112.254086 617112.249288 18: seq: 1d, tmcuart_response oid=5 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89' | |
| Receive: 94 617112.329008 617112.249288 15: seq: 1d, analog_in_state oid=19 next_clock=843116736 value=18226 | |
| Receive: 95 617112.368932 617112.249288 14: seq: 1d, analog_in_state oid=23 next_clock=850316736 value=11619 | |
| Receive: 96 617112.379037 617112.249288 15: seq: 1d, analog_in_state oid=24 next_clock=852116736 value=28316 | |
| Receive: 97 617112.459042 617112.430881 14: seq: 1e, analog_in_state oid=32 next_clock=866516736 value=7632 | |
| Receive: 98 617112.463908 617112.463326 11: seq: 1f, clock clock=814880144 | |
| Receive: 99 617112.495083 617112.493281 12: seq: 10, shutdown clock=820280453 static_string_id=Command request | |
| Stats 617112.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7150380 bytes_read=7554460 bytes_retransmit=9 bytes_invalid=0 send_seq=267632 receive_seq=267632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003650 sd_pos=16280 heater_bed: target=105 temp=105.2 pwm=0.202 z_thermal_adjust: temp=58.7 chamber_heater: target=55 temp=55.6 pwm=0.000 sysload=2.26 cputime=6663.737 memavail=3613540 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=111.2 pwm=1.000 | |
| Command interrupted | |
| Command interrupted | |
| Shutdown due to webhooks request | |
| Once the underlying issue is corrected, use the | |
| "FIRMWARE_RESTART" command to reset the firmware, reload the | |
| config, and restart the host software. | |
| Printer is shutdown | |
| Shutdown due to webhooks request | |
| Once the underlying issue is corrected, use the | |
| "FIRMWARE_RESTART" command to reset the firmware, reload the | |
| config, and restart the host software. | |
| Printer is shutdown | |
| virtual_sdcard on_error | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/extras/virtual_sdcard.py", line 421, in work_handler | |
| self.gcode.run_script(line) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 321, in run_script | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 207, in func | |
| return origfunc(self._get_extended_params(params)) | |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | |
| File "/home/orangepi/klipper/klippy/extras/gcode_macro.py", line 270, in cmd | |
| self.template.run_gcode_from_command(kwparams) | |
| File "/home/orangepi/klipper/klippy/extras/gcode_macro.py", line 79, in run_gcode_from_command | |
| self.gcode.run_script_from_command(self.render(context)) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 314, in run_script_from_command | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 207, in func | |
| return origfunc(self._get_extended_params(params)) | |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 221, in handler | |
| return self._cmd_mux(cmd, gcmd) | |
| ^^^^^^^^^^^^^^^^^^^^^^^^ | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 423, in _cmd_mux | |
| values[key_param](gcmd) | |
| File "/home/orangepi/klipper/klippy/extras/filaments.py", line 423, in cmd_HEAT_EXTRUDER_AND_WAIT | |
| printer_extruder.cmd_M109(gcmd_M109) | |
| File "/home/orangepi/klipper/klippy/kinematics/extruder.py", line 619, in cmd_M109 | |
| self.cmd_M104(gcmd, wait=True) | |
| File "/home/orangepi/klipper/klippy/kinematics/extruder.py", line 615, in cmd_M104 | |
| pheaters.set_temperature(extruder.get_heater(), temp, wait) | |
| File "/home/orangepi/klipper/klippy/extras/heaters.py", line 1082, in set_temperature | |
| self._wait_for_temperature(heater) | |
| File "/home/orangepi/klipper/klippy/extras/heaters.py", line 1075, in _wait_for_temperature | |
| self.printer.wait_while(check) | |
| File "/home/orangepi/klipper/klippy/klippy.py", line 399, in wait_while | |
| raise WaitInterruption("Command interrupted") | |
| WaitInterruption: Command interrupted | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/extras/virtual_sdcard.py", line 425, in work_handler | |
| self.gcode.run_script(self.on_error_gcode.render()) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 321, in run_script | |
| self._process_commands(script.split("\n"), need_ack=False) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 298, in _process_commands | |
| handler(gcmd) | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 389, in cmd_default | |
| raise gcmd.error(self.printer.get_state_message()[0]) | |
| gcode.CommandError: Shutdown due to webhooks request | |
| Once the underlying issue is corrected, use the | |
| "FIRMWARE_RESTART" command to reset the firmware, reload the | |
| config, and restart the host software. | |
| Printer is shutdown | |
| Stats 617113.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7150435 bytes_read=7554664 bytes_retransmit=9 bytes_invalid=0 send_seq=267636 receive_seq=267636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003704 heater_bed: target=105 temp=105.2 pwm=0.000 z_thermal_adjust: temp=58.7 chamber_heater: target=55 temp=55.6 pwm=0.000 sysload=2.26 cputime=6663.782 memavail=3613584 print_time=14517.891 buffer_time=0.000 print_stall=5 extruder: target=250 temp=114.5 pwm=0.000 | |
| Attempting MCU 'mcu' reset command | |
| b'Got EOF when reading from device' | |
| webhooks client 547876391120: Disconnected | |
| Restarting printer | |
| Start printer at Tue Aug 6 00:11:24 2024 (1722903084.8 617115.6) | |
| ===== Config file ===== | |
| [respond] | |
| [gcode_macro CHOPPER_TUNE] | |
| description = Vibrations tests to calculate lowest magnitude drivers registers v1.2 | |
| variable_debug = False | |
| variable_inset = 10 | |
| variable_current_change_step = 25 | |
| variable_measure_time = 1250 | |
| variable_required_rpm = [37.5, 150, 1.5] | |
| variable_delay = 500 | |
| gcode = | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| _detect_driver stepper={axis} | |
| _chop_workflow axis={axis} {rawparams} | |
| [gcode_shell_command chop_tune] | |
| command = ~/chopper-resonance-tuner/chopper_plot.sh | |
| timeout = 9999.0 | |
| verbose = True | |
| [gcode_macro _detect_driver] | |
| description = Find which driver is used in configuration | |
| variable_drivers = '2130', '2208', '2209', '2660', '2240', '5160' | |
| variable_driver = 0 | |
| variable_resistor = 0 | |
| gcode = | |
| {% set stepper = 'stepper_' + params.STEPPER|string|lower %} | |
| {% for driver in drivers %} | |
| {% if 'run_current' in printer.configfile.config['tmc' + driver + ' ' + stepper] %} | |
| {action_respond_info('Selected tmc%s for %s' % (driver, stepper))} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=driver VALUE={driver} | |
| {% if driver != '2240' %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].sense_resistor %} | |
| {% else %} | |
| {% set resistor = printer.configfile.settings['tmc' + driver + ' ' + stepper].rref %} | |
| {% endif %} | |
| SET_GCODE_VARIABLE MACRO=_detect_driver VARIABLE=resistor VALUE={resistor} | |
| {% endif %} | |
| {% endfor %} | |
| [gcode_macro _chop_apply_regs] | |
| variable_registers = 'tbl', 'toff', 'hend', 'hstrt', 'tpfd', 'curr' | |
| variable_amount = 0 | |
| variable_tbl = -1 | |
| variable_toff = -1 | |
| variable_hend = -1 | |
| variable_hstrt = -1 | |
| variable_tpfd = -1 | |
| variable_curr = -1 | |
| gcode = | |
| {% if printer['gcode_macro _chop_apply_regs'][params.FIELD]|int != params.VALUE|int %} | |
| {% for stepper in params.STEPPERS.split('-') %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to {params.VALUE|int} on {stepper} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% for count in range(1, amount + 1) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| M118 Setting {params.FIELD|string|lower} from { | |
| printer['gcode_macro _chop_apply_regs'][params.FIELD]|int} to { | |
| params.VALUE|int} on {stepper|string + count|string} | |
| {% endif %} | |
| {% if params.FIELD|lower != 'curr' %} | |
| SET_TMC_FIELD STEPPER={stepper|string + count|string} FIELD={params.FIELD} VALUE={params.VALUE|int} | |
| {% else %} | |
| SET_TMC_CURRENT STEPPER={stepper} CURRENT={params.VALUE|int / 1000} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={params.FIELD|string|lower} VALUE={params.VALUE|int} | |
| {% endif %} | |
| [gcode_macro _chop_workflow] | |
| description = Calculate process of CHOPPER_TUNE macro | |
| gcode = | |
| {% set axis = params.AXIS|default('X')|string|lower %} | |
| {% set driver = printer['gcode_macro _detect_driver'].driver|string|lower %} | |
| {% set sense_resistor = printer['gcode_macro _detect_driver'].resistor %} | |
| {% set current_min = params.CURRENT_MIN_MA|default('default')|string|lower %} | |
| {% set current_max = params.CURRENT_MAX_MA|default('default')|string|lower %} | |
| {% set current_change_step = printer['gcode_macro CHOPPER_TUNE'].current_change_step %} | |
| {% set tbl_min = params.TBL_MIN|default(0)|int %} | |
| {% set tbl_max = params.TBL_MAX|default(3)|int %} | |
| {% set toff_min = params.TOFF_MIN|default(1)|int %} | |
| {% set toff_max = params.TOFF_MAX|default(8)|int %} | |
| {% set hstrt_hend_max = params.HSTRT_HEND_MAX|default(16)|int %} | |
| {% set hstrt_min = params.HSTRT_MIN|default(0)|int %} | |
| {% set hstrt_max = params.HSTRT_MAX|default(7)|int %} | |
| {% set hend_min = params.HEND_MIN|default(2)|int %} | |
| {% set hend_max = params.HEND_MAX|default(15)|int %} | |
| {% set tpfd_min = params.TPFD_MIN|default(-1)|int %} | |
| {% set tpfd_max = params.TPFD_MAX|default(-1)|int %} | |
| {% set min_speed = params.MIN_SPEED|default('default')|string|lower %} | |
| {% set max_speed = params.MAX_SPEED|default('default')|string|lower %} | |
| {% set speed_change_step = params.SPEED_CHANGE_STEP|default('default')|string|lower %} | |
| {% set required_rpm = printer['gcode_macro CHOPPER_TUNE'].required_rpm %} | |
| {% set iterations = params.ITERATIONS|default(1)|int %} | |
| {% set travel_distance = params.TRAVEL_DISTANCE|default('default')|string|lower %} | |
| {% set accel_chip = params.ACCELEROMETER|default('default')|string|lower %} | |
| {% set find_vibr = params.FIND_VIBRATIONS|default('False')|string|lower %} | |
| {% set run_plotter = params.RUN_PLOTTER|default('True')|string|lower %} | |
| {% set inset = printer['gcode_macro CHOPPER_TUNE'].inset %} | |
| {% set config = printer.configfile.config %} | |
| {% set settings = printer.configfile.settings %} | |
| {% set measure_time = printer['gcode_macro CHOPPER_TUNE'].measure_time / 1000|float %} | |
| {% set delay = printer['gcode_macro CHOPPER_TUNE'].delay|int %} | |
| {% set kinematics = config.printer.kinematics|string %} | |
| {% if axis in ['x', 'y', 'z'] %} | |
| {% if kinematics == 'corexy' %} | |
| {% if axis in ['x', 'y'] %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% endif %} | |
| {% set steppers = ['stepper_x', 'stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% elif kinematics == 'cartesian' %} | |
| {% if axis == 'x' %} | |
| {% set axes = ['x', 'y'] %} | |
| {% set steppers = ['stepper_x'] %} | |
| {% elif axis == 'y' %} | |
| {% set axes = ['y', 'x'] %} | |
| {% set steppers = ['stepper_y'] %} | |
| {% elif axis == 'z' %} | |
| {% set axes = ['z', 'x'] %} | |
| {% set steppers = ['stepper_z'] %} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Script does not support your kinematics')} | |
| {% endif %} | |
| {% if axes[0] == 'z' %} | |
| {% set minAX = (settings['stepper_' + axes[0]].position_min|float, 0)|max + inset %} | |
| {% set acceleration = settings.printer.max_z_accel|int %} | |
| {% set trv_speed = config.printer.max_z_velocity|int / 2 * 60 %} | |
| {% else %} | |
| {% set minAX = settings['stepper_' + axes[0]].position_min|float + inset %} | |
| {% set acceleration = config.printer.max_accel|int %} | |
| {% set trv_speed = config.printer.max_velocity|int / 2 * 60 %} | |
| {% endif %} | |
| {% set maxAX = settings['stepper_' + axes[0]].position_max|float - inset %} | |
| {% set midAX = settings['stepper_' + axes[0]].position_min|float + | |
| ((settings['stepper_' + axes[0]].position_max|float - | |
| settings['stepper_' + axes[0]].position_min|float) / 2) %} | |
| {% set midBAX = settings['stepper_' + axes[1]].position_min|float + | |
| ((settings['stepper_' + axes[1]].position_max|float - | |
| settings['stepper_' + axes[1]].position_min|float) / 2) %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! Incorrect direction')} | |
| {% endif %} | |
| {% if tpfd_min != -1 or tpfd_max != -1 %} | |
| {% if driver == '5160' or driver == '2240' %} | |
| {% if tpfd_min < 0 or tpfd_max < 0 %} | |
| {action_raise_error('WARNING!!! Incorrect TPFD values')} | |
| {% endif %} | |
| {% else %} | |
| {action_raise_error('WARNING!!! TMC%s not support register TPFD' % (driver))} | |
| {% endif %} | |
| {% endif %} | |
| {% for register in printer['gcode_macro _chop_apply_regs'].registers %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE={register|string|lower} VALUE=-1 | |
| {% endfor %} | |
| {% for mot in range(8) %} | |
| {% if ('stepper_' + axes[0] + mot|string) in config %} | |
| SET_GCODE_VARIABLE MACRO=_chop_apply_regs VARIABLE=amount VALUE={mot} | |
| {% if ('stepper_' + axes[0] + (mot + 1)|string) not in config %} | |
| {action_respond_info('Selected %dwd configuration' % (mot + 1))} | |
| {% endif %} | |
| {% elif mot == 1 %} | |
| {action_respond_info('Selected 1wd configuration')} | |
| {% endif %} | |
| {% endfor %} | |
| {% if accel_chip == 'default' %} | |
| {% if 'accel_chip' in config.resonance_tester %} | |
| {% set accel_chip = config.resonance_tester.accel_chip %} | |
| {% else %} | |
| {% set accel_chip = 'adxl345' %} | |
| {% endif %} | |
| {% endif %} | |
| {action_respond_info('Selected %s for accelerometer' % (accel_chip))} | |
| {% if current_min == 'default' %} | |
| {% set current_min = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_min' % (current_min))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_min = current_min|int %} | |
| {% endif %} | |
| {% if current_max == 'default' %} | |
| {% set current_max = (config['tmc' + driver + ' ' + steppers[0]].run_current|float * 1000)|int%} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Set default run_current: %d mA to run_current_max' % (current_max))} | |
| {% endif %} | |
| {% else %} | |
| {% set current_max = current_max|int %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set current_max = current_min %} | |
| {% set tbl_min = settings['tmc' + driver + ' ' + steppers[0]].driver_tbl|int %} | |
| {% set tbl_max = tbl_min %} | |
| {% set toff_min = settings['tmc' + driver + ' ' + steppers[0]].driver_toff|int %} | |
| {% set toff_max = toff_min %} | |
| {% set hstrt_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hstrt|int %} | |
| {% set hstrt_max = hstrt_min %} | |
| {% set hend_min = settings['tmc' + driver + ' ' + steppers[0]].driver_hend|int %} | |
| {% set hend_max = hend_min %} | |
| {% set rotation_dist = config[steppers[0]].rotation_distance|float %} | |
| {% set gear_ratio = (config[steppers[0]].gear_ratio|default('1:1')).split(':') %} | |
| {% set full_steps_per_rotation = config[steppers[0]].full_steps_per_rotation|default(200)|int %} | |
| {% if min_speed == 'default' %} | |
| {% set min_speed = (required_rpm[0] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|float %} | |
| {% else %} | |
| {% set min_speed = min_speed|float %} | |
| {% endif %} | |
| {% if max_speed == 'default' %} | |
| {% set max_required_mms = (required_rpm[1] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist)|int %} | |
| {% set max_speed = (((-acceleration * measure_time + ((acceleration * measure_time) ** 2 + | |
| 4 * acceleration * (maxAX - minAX)) ** 0.5) / 2), max_required_mms)|min|float %} | |
| {% else %} | |
| {% set max_speed = max_speed|float %} | |
| {% endif %} | |
| {% if speed_change_step == 'default' %} | |
| {% set speed_change_step = required_rpm[2] / 60 * full_steps_per_rotation / | |
| 200 / (gear_ratio[0]|int / gear_ratio[1]|int) * rotation_dist %} | |
| {% else %} | |
| {% set speed_change_step = speed_change_step|float %} | |
| {% endif %} | |
| {% else %} | |
| {% if min_speed == 'default' or max_speed == 'default' %} | |
| {action_raise_error('WARNING!!! Resonance speed must be defined')} | |
| {% endif %} | |
| {% set min_speed, max_speed = min_speed|float, max_speed|float %} | |
| {% set speed_change_step = 1 %} | |
| {% endif %} | |
| {% if max_speed > trv_speed / 30 %} | |
| {action_raise_error('WARNING!!! Required speed (%d mm/s) on axis (%s)' | |
| ' is faster than kinematics allow, please lower speed or increase' | |
| ' speed limit in printer.cfg' % (max_speed, axes[0]))} | |
| {% endif %} | |
| {% set accel_decel_distance = max_speed ** 2 / acceleration %} | |
| {% set auto_travel_distance = accel_decel_distance + (max_speed * measure_time) %} | |
| {% if printer['gcode_macro CHOPPER_TUNE'].debug %} | |
| {action_respond_info('Acceleration & deceleration zone = %f mm' % (accel_decel_distance))} | |
| {action_respond_info('Auto calculated min required travel distance = %f mm' % (auto_travel_distance))} | |
| {% endif %} | |
| {% if travel_distance == 'default' %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Required travel distance on axis (%s)' | |
| ' (%.2f mm) is longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% else %} | |
| {% set travel_distance = travel_distance|int %} | |
| {% if minAX + travel_distance > maxAX %} | |
| {% set travel_distance = maxAX - minAX %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less than' | |
| ' it should be, please increase acceleration or lower speed' % (axes[0]))} | |
| {% else %} | |
| {action_respond_info('WARNING!!! Travel distance on axis (%s)' | |
| ' is longer than kinematics allows, lowering...' % (axes[0]))} | |
| {% endif %} | |
| {% else %} | |
| {% if travel_distance < auto_travel_distance %} | |
| {% set travel_distance = auto_travel_distance %} | |
| {% if minAX + auto_travel_distance > maxAX %} | |
| {action_raise_error('WARNING!!! Travel distance on axis (%s) is less' | |
| ' than required (%.2f mm), and longer than kinematics allows, please lower' | |
| ' speed or increase acceleration' % (axes[0], auto_travel_distance))} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% endif %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {action_respond_info('Final max travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start find vibration mode, speed: %.2f --> %.2f mm/s with %.2f step current=%d TBL=%d TOFF=%d' | |
| ' HSTRT=%d HEND=%d' % (min_speed, max_speed, speed_change_step, current_min, tbl_min, toff_min, hstrt_min, hend_min))} | |
| {% else %} | |
| {action_respond_info('Final travel distance = %.2f mm, position min = %.2f, traveling: %.2f --> %.2f' % | |
| (travel_distance, minAX, minAX, travel_distance + minAX))} | |
| {action_respond_info('Start of register enumeration mode, speed: %.2f --> %.2f mm/s current: %d' | |
| ' --> %d mA iterations=%d TBL: %d --> %d TOFF: %d --> %d HSTRT: %d --> %d HEND: %d --> %d TPFD:' | |
| ' %d --> %d' % (min_speed, max_speed, current_min, current_max, iterations, tbl_min, tbl_max, | |
| toff_min, toff_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max))} | |
| {% endif %} | |
| {% if not 'xyz' in printer.toolhead.homed_axes %} | |
| G28 X Y Z | |
| {% endif %} | |
| SET_VELOCITY_LIMIT ACCEL={acceleration} | |
| SET_VELOCITY_LIMIT ACCEL_TO_DECEL={acceleration} | |
| G0 {axes[0]}{minAX} {axes[1]}{midBAX} F{trv_speed} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='cleaner' | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| G4 P5000 | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=stand_still | |
| {% for current in range(current_min, current_max + 1, current_change_step) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=curr value={current} | |
| {% for tbl in range(tbl_min, tbl_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tbl value={tbl} | |
| {% for toff in range(toff_min, toff_max + 1) %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=toff value={toff} | |
| {% for hstrt_value in range(hstrt_min, hstrt_max + 1) %} | |
| {% for hend_value in range(hend_min, hend_max + 1) %} | |
| {% if hend_value + hstrt_value <= hstrt_hend_max %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hend value={hend_value} | |
| _chop_apply_regs steppers={steppers|join('-')} field=hstrt value={hstrt_value} | |
| {% for tpfd in range(tpfd_min, tpfd_max + 1) %} | |
| {% if tpfd_min != -1 and tpfd_max != -1 %} | |
| _chop_apply_regs steppers={steppers|join('-')} field=tpfd value={tpfd} | |
| {% endif %} | |
| DUMP_TMC STEPPER={steppers[0]} REGISTER=chopconf | |
| {% for speed in range((min_speed * 100)|int, (max_speed * 100)|int + 1, (speed_change_step * 100)|int) %} | |
| {% set speed = speed / 100 %} | |
| {% for i in range(iterations) %} | |
| {% if find_vibr == 'true' or find_vibr == '1' %} | |
| {% set travel_distance = (travel_distance / max_speed) * speed %} | |
| G4 P{delay} | |
| M118 Speed {speed|round(2)} mm/s on {travel_distance|round(2)} mm | |
| {% endif %} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX + travel_distance} F{speed*60} | |
| ACCELEROMETER_MEASURE CHIP={accel_chip} | |
| G0 {axes[0]}{minAX} F{trv_speed} | |
| M400 | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endif %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% endfor %} | |
| {% if tpfd_min == -1 or tpfd_max == -1 %} | |
| {% set tpfd_min, tpfd_max = 0, 0 %} | |
| {% endif %} | |
| G4 P500 | |
| G0 {axis}{midAX} F{trv_speed} | |
| {% if run_plotter == 'true' or run_plotter == '1' %} | |
| RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d hstrt_max=%d' | |
| ' hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| M118 For run parser manually type - RUN_SHELL_COMMAND CMD=chop_tune PARAMS='{'current_min_ma=%d current_max_ma=%d current_change_step=%d tbl_min=%d tbl_max=%d toff_min=%d toff_max=%d hstrt_hend_max=%d hstrt_min=%d' | |
| ' hstrt_max=%d hend_min=%d hend_max=%d tpfd_min=%d tpfd_max=%d min_speed=%d max_speed=%d speed_change_step=%d iterations=%d accel_chip=%s driver=%s sense_resistor=%f'%(current_min|int, current_max|int, current_change_step, | |
| tbl_min, tbl_max, toff_min, toff_max, hstrt_hend_max, hstrt_min, hstrt_max, hend_min, hend_max, tpfd_min, tpfd_max, min_speed*100, max_speed*100, speed_change_step*100, iterations, accel_chip, driver, sense_resistor)}' | |
| {% endif %} | |
| [virtual_sdcard] | |
| path = ~/printer_data/gcodes | |
| on_error_gcode = CANCEL_PRINT | |
| [pause_resume] | |
| [display_status] | |
| [gcode_macro CANCEL_PRINT] | |
| description = Cancel the actual running print | |
| rename_existing = BASE_CANCEL_PRINT | |
| gcode = | |
| TURN_OFF_HEATERS | |
| CLEAR_PAUSE | |
| SDCARD_RESET_FILE | |
| BASE_CANCEL_PRINT | |
| G90 | |
| G0 X350 Y350 F3600 | |
| SET_SKEW CLEAR=1 | |
| [gcode_macro PAUSE] | |
| description = Pause the actual running print | |
| rename_existing = PAUSE_BASE | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set idle_timeout = client.idle_timeout|default(0) %} | |
| {% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %} | |
| {% set restore = False if printer.toolhead.extruder == '' | |
| else True if params.RESTORE|default(1)|int == 1 else False %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}" | |
| {% if idle_timeout > 0 %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout} | |
| SET_IDLE_TIMEOUT TIMEOUT={idle_timeout} | |
| {% endif %} | |
| PAUSE_BASE | |
| {client.user_pause_macro|default("")} | |
| _TOOLHEAD_PARK_PAUSE_CANCEL {rawparams} | |
| [gcode_macro RESUME] | |
| description = Resume the actual running print | |
| rename_existing = RESUME_BASE | |
| variable_last_extruder_temp = {'restore': False, 'temp': 0} | |
| variable_restore_idle_timeout = 0 | |
| variable_idle_state = False | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set sp_move = client.speed_move|default(velocity) %} | |
| {% set runout_resume = True if client.runout_sensor|default("") == "" | |
| else True if not printer[client.runout_sensor].enabled | |
| else printer[client.runout_sensor].filament_detected %} | |
| {% set can_extrude = True if printer.toolhead.extruder == '' | |
| else printer[printer.toolhead.extruder].can_extrude %} | |
| {% set do_resume = False %} | |
| {% set prompt_txt = [] %} | |
| {% if printer.idle_timeout.state|upper == "IDLE" or idle_state %} | |
| SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False | |
| {% if last_extruder_temp.restore %} | |
| RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }' | |
| M109 S{last_extruder_temp.temp} | |
| {% set do_resume = True %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% elif can_extrude %} | |
| {% set do_resume = True %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}' | |
| {% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %} | |
| {% endif %} | |
| {% if runout_resume %} | |
| {% if do_resume %} | |
| {% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} | |
| {client.user_resume_macro|default("")} | |
| _CLIENT_EXTRUDE | |
| RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}' | |
| {% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %} | |
| {% endif %} | |
| {% if not (runout_resume and do_resume) %} | |
| RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!" | |
| {% for element in prompt_txt %} | |
| RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}' | |
| {% endfor %} | |
| RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info" | |
| RESPOND TYPE=command MSG="action:prompt_show" | |
| {% endif %} | |
| [gcode_macro SET_PAUSE_NEXT_LAYER] | |
| description = Enable a pause if the next layer is reached | |
| gcode = | |
| {% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %} | |
| {% set ENABLE = params.ENABLE|default(1)|int != 0 %} | |
| {% set MACRO = params.MACRO|default(pause_next_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}" | |
| [gcode_macro SET_PAUSE_AT_LAYER] | |
| description = Enable/disable a pause if a given layer number is reached | |
| gcode = | |
| {% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %} | |
| {% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined | |
| else params.LAYER is defined %} | |
| {% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %} | |
| {% set MACRO = params.MACRO|default(pause_at_layer.call, True) %} | |
| SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}" | |
| [gcode_macro SET_PRINT_STATS_INFO] | |
| rename_existing = SET_PRINT_STATS_INFO_BASE | |
| description = Overwrite, to get pause_next_layer and pause_at_layer feature | |
| variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" } | |
| variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" } | |
| gcode = | |
| {% if pause_next_layer.enable %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}' | |
| {pause_next_layer.call} | |
| SET_PAUSE_NEXT_LAYER ENABLE=0 | |
| {% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %} | |
| RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}' | |
| {pause_at_layer.call} | |
| SET_PAUSE_AT_LAYER ENABLE=0 | |
| {% endif %} | |
| SET_PRINT_STATS_INFO_BASE {rawparams} | |
| [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL] | |
| description = Helper: park toolhead used in PAUSE and CANCEL_PRINT | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set velocity = printer.configfile.settings.pause_resume.recover_velocity %} | |
| {% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %} | |
| {% set custom_park_x = client.custom_park_x|default(0.0) %} | |
| {% set custom_park_y = client.custom_park_y|default(0.0) %} | |
| {% set park_dz = client.custom_park_dz|default(2.0)|abs %} | |
| {% set sp_hop = client.speed_hop|default(15) * 60 %} | |
| {% set sp_move = client.speed_move|default(velocity) * 60 %} | |
| {% set origin = printer.gcode_move.homing_origin %} | |
| {% set act = printer.gcode_move.gcode_position %} | |
| {% set max = printer.toolhead.axis_maximum %} | |
| {% set cone = printer.toolhead.cone_start_z|default(max.z) %} | |
| {% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch'] | |
| else False %} | |
| {% set z_min = params.Z_MIN|default(0)|float %} | |
| {% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %} | |
| {% set x_park = params.X if params.X is defined | |
| else custom_park_x if use_custom | |
| else 0.0 if round_bed | |
| else (max.x - 5.0) %} | |
| {% set y_park = params.Y if params.Y is defined | |
| else custom_park_y if use_custom | |
| else (max.y - 5.0) if round_bed and z_park < cone | |
| else 0.0 if round_bed | |
| else (max.y - 5.0) %} | |
| _CLIENT_RETRACT | |
| {% if "xyz" in printer.toolhead.homed_axes %} | |
| G90 | |
| G1 Z{z_park} F{sp_hop} | |
| G1 X{x_park} Y{y_park} F{sp_move} | |
| {% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='Printer not homed' | |
| {% endif %} | |
| [gcode_macro _CLIENT_EXTRUDE] | |
| description = Extrudes, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %} | |
| {% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_unretract)|default(35) %} | |
| {% set absolute_extrude = printer.gcode_move.absolute_extrude %} | |
| {% if printer.toolhead.extruder != '' %} | |
| {% if printer[printer.toolhead.extruder].can_extrude %} | |
| {% if use_fw_retract %} | |
| {% if length < 0 %} | |
| G10 | |
| {% else %} | |
| G11 | |
| {% endif %} | |
| {% else %} | |
| M83 | |
| G1 E{length} F{(speed|float|abs) * 60} | |
| {% if absolute_extrude %} | |
| M82 | |
| {% endif %} | |
| {% endif %} | |
| {% else %} | |
| RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}' | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _CLIENT_RETRACT] | |
| description = Retracts, if the extruder is hot enough | |
| gcode = | |
| {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %} | |
| {% set length = params.LENGTH|default(client.retract)|default(1.0)|float %} | |
| {% set speed = params.SPEED|default(client.speed_retract)|default(35) %} | |
| _CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs} | |
| [autotune_tmc stepper_x] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc stepper_y] | |
| motor = omc-17hs19-2004s1 | |
| tuning_goal = performance | |
| tbl = 1 | |
| toff = 8 | |
| [autotune_tmc extruder] | |
| motor = moons-cse14hra1l410a | |
| tuning_goal = performance | |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing = _BED_MESH_CALIBRATE | |
| gcode = | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} | |
| {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} | |
| {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} | |
| {% set attach_macro = kamp_settings.attach_macro | string %} | |
| {% set detach_macro = kamp_settings.detach_macro | string %} | |
| {% set mesh_margin = kamp_settings.mesh_margin | float %} | |
| {% set fuzz_amount = kamp_settings.fuzz_amount | float %} | |
| {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} | |
| {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} | |
| {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %} | |
| {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %} | |
| {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} | |
| {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} | |
| {% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} | |
| {% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} | |
| {% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} | |
| {% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %} | |
| {% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %} | |
| {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %} | |
| {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %} | |
| {% if (([points_x, points_y]|max) > 6) %} | |
| {% set algorithm = "bicubic" %} | |
| {% set min_points = 4 %} | |
| {% else %} | |
| {% set algorithm = "lagrange" %} | |
| {% set min_points = 3 %} | |
| {% endif %} | |
| {% set points_x = [points_x , min_points]|max %} | |
| {% set points_y = [points_y , min_points]|max %} | |
| {% set points_x = [points_x , probe_count[0]]|min %} | |
| {% set points_y = [points_y , probe_count[1]]|min %} | |
| {% if verbose_enable == True %} | |
| {% if printer.exclude_object.objects != [] %} | |
| { action_respond_info( "Algorithm: {}.".format( | |
| (algorithm), | |
| )) } | |
| { action_respond_info("Default probe count: {},{}.".format( | |
| (probe_count[0]), | |
| (probe_count[1]), | |
| )) } | |
| { action_respond_info("Adapted probe count: {},{}.".format( | |
| (points_x), | |
| (points_y), | |
| )) } | |
| {action_respond_info("Default mesh bounds: {}, {}.".format( | |
| (bed_mesh_min[0],bed_mesh_min[1]), | |
| (bed_mesh_max[0],bed_mesh_max[1]), | |
| )) } | |
| {% if mesh_margin > 0 %} | |
| {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format( | |
| (mesh_margin), | |
| (mesh_margin), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Mesh margin is 0, margin not increased.")} | |
| {% endif %} | |
| {% if fuzz_amount > 0 %} | |
| {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format( | |
| (fuzz_amount), | |
| )) } | |
| {% else %} | |
| {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")} | |
| {% endif %} | |
| { action_respond_info("Adapted mesh bounds: {}, {}.".format( | |
| (adapted_x_min, adapted_y_min), | |
| (adapted_x_max, adapted_y_max), | |
| )) } | |
| {action_respond_info("KAMP adjustments successful. Happy KAMPing!")} | |
| {% else %} | |
| {action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")} | |
| G4 P5000 | |
| {% endif %} | |
| {% endif %} | |
| {% if probe_dock_enable == True %} | |
| {attach_macro} | |
| {% endif %} | |
| _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y} | |
| {% if probe_dock_enable == True %} | |
| {detach_macro} | |
| {% endif %} | |
| [gcode_macro LINE_PURGE] | |
| description = A purge macro that adapts to be near your actual printed objects | |
| gcode = | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %} | |
| {% if printer.firmware_retraction is defined %} | |
| {% set RETRACT = G10 | string %} | |
| {% set UNRETRACT = G11 | string %} | |
| {% else %} | |
| {% set RETRACT = 'G1 E-.5 F2100' | string %} | |
| {% set UNRETRACT = 'G1 E.5 F2100' | string %} | |
| {% endif %} | |
| {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %} | |
| {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %} | |
| {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %} | |
| {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %} | |
| {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %} | |
| {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} | |
| {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} | |
| {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} | |
| {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} | |
| {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} | |
| {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} | |
| {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} | |
| {% set purge_move_speed = (flow_rate / 5.0) * 60 | float %} | |
| {% if cross_section < 5 %} | |
| {action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")} | |
| {% else %} | |
| {% if verbose_enable == True %} | |
| {action_respond_info("Moving filament tip {}mms".format( | |
| (tip_distance), | |
| )) } | |
| {% endif %} | |
| {% if printer.firmware_retraction is defined %} | |
| {action_respond_info("KAMP purge is using firmware retraction.")} | |
| {% else %} | |
| {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")} | |
| {% endif %} | |
| {% if purge_y_origin > 0 %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_center), | |
| (purge_y_origin), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% else %} | |
| {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format( | |
| (purge_x_origin), | |
| (purge_y_center), | |
| (purge_amount), | |
| (flow_rate), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Prepurge_State | |
| {% if purge_y_origin > 0 %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_center} Y{purge_y_origin} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 X{purge_x_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% else %} | |
| G92 E0 | |
| G0 F{travel_speed} | |
| G90 | |
| G0 X{purge_x_origin} Y{purge_y_center} | |
| G0 Z{purge_height} | |
| M83 | |
| G1 E{tip_distance} F{purge_move_speed} | |
| G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed} | |
| {RETRACT} | |
| G0 Y{purge_y_center + purge_amount + 10} F{travel_speed} | |
| G92 E0 | |
| M82 | |
| G0 Z{purge_height * 2} F{travel_speed} | |
| {% endif %} | |
| RESTORE_GCODE_STATE NAME=Prepurge_State | |
| {% endif %} | |
| [gcode_macro SMART_PARK] | |
| description = Parks your printhead near the print area for pre-print hotend heating. | |
| gcode = | |
| {% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} | |
| {% set z_height = kamp_settings.smart_park_height | float %} | |
| {% set purge_margin = kamp_settings.purge_margin | float %} | |
| {% set verbose_enable = kamp_settings.verbose_enable | abs %} | |
| {% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} | |
| {% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} | |
| {% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %} | |
| {% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %} | |
| {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} | |
| {% set x_min = all_points | map(attribute=0) | min | default(center_x) %} | |
| {% set y_min = all_points | map(attribute=1) | min | default(center_y) %} | |
| {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} | |
| {% if purge_margin > 0 and x_min != center_x and y_min != center_y %} | |
| {% set x_min = [ x_min - purge_margin , x_min ] | min %} | |
| {% set y_min = [ y_min - purge_margin , y_min ] | min %} | |
| {% set x_min = [ x_min , axis_minimum_x ] | max %} | |
| {% set y_min = [ y_min , axis_minimum_y ] | max %} | |
| {% endif %} | |
| {% if verbose_enable == True %} | |
| { action_respond_info("Smart Park location: {},{}.".format( | |
| (x_min), | |
| (y_min), | |
| )) } | |
| {% endif %} | |
| SAVE_GCODE_STATE NAME=Presmartpark_State | |
| G90 | |
| {% if printer.toolhead.position.z < z_height %} | |
| G0 Z{z_height} | |
| {% endif %} | |
| G0 X{x_min} Y{y_min} F{travel_speed} | |
| G0 Z{z_height} | |
| RESTORE_GCODE_STATE NAME=Presmartpark_State | |
| [gcode_macro _KAMP_Settings] | |
| description = This macro contains all adjustable settings for KAMP | |
| variable_verbose_enable = True | |
| variable_mesh_margin = 5 | |
| variable_fuzz_amount = 1 | |
| variable_probe_dock_enable = False | |
| variable_attach_macro = 'Attach_Probe' | |
| variable_detach_macro = 'Dock_Probe' | |
| variable_purge_height = 0.8 | |
| variable_tip_distance = 0 | |
| variable_purge_margin = 10 | |
| variable_purge_amount = 30 | |
| variable_flow_rate = 12 | |
| variable_smart_park_height = 10 | |
| gcode = | |
| {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")} | |
| [gcode_macro _TAP_VARIABLES] | |
| variable_probing = 0 | |
| variable_brushed = 0 | |
| variable_speed_multiplier = 100 | |
| gcode = | |
| [homing_override] | |
| axes = xyz | |
| gcode = | |
| set_stepper_enable stepper=stepper_x enable=1 | |
| set_stepper_enable stepper=stepper_y enable=1 | |
| {% if not 'X' in params and not 'Y' in params and not 'Z' in params %} | |
| G28 X | |
| G28 Y | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% else %} | |
| {% if 'X' in params %} | |
| G28 X | |
| {% endif %} | |
| {% if 'Y' in params %} | |
| G28 Y | |
| {% endif %} | |
| {% if 'Z' in params %} | |
| set_stepper_enable stepper=stepper_z enable=1 | |
| G90 | |
| M220 S{printer["gcode_macro _TAP_SETTINGS"].home_speed} | |
| G0 X{printer["gcode_macro _TAP_SETTINGS"].home_x} Y{printer["gcode_macro _TAP_SETTINGS"].home_y} | |
| G28 Z | |
| M220 S100 | |
| G91 | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _PRE_PROBE_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| {% set BRUSHED = printer["gcode_macro _TAP_VARIABLES"].brushed %} | |
| {% if BRUSHED == 1 %} | |
| _PROBE_TEMP_CHECK | |
| {% else %} | |
| NOZZLE_BRUSH | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=1 | |
| _PROBE_TEMP_CHECK | |
| {% endif %} | |
| [gcode_macro _PROBE_TEMP_CHECK] | |
| gcode = | |
| {% set svv = printer.save_variables.variables %} | |
| {% set PROBE_TEMP = svv.probe_temp %} | |
| {% set MAX_TEMP = PROBE_TEMP + 5 %} | |
| {% set ACTUAL_TEMP = printer.extruder.temperature %} | |
| {% set TARGET_TEMP = printer.extruder.target %} | |
| {% set PROBE_ACCEL = printer["gcode_macro _TAP_SETTINGS"].probe_accel %} | |
| SET_KINEMATICS_LIMIT Z_ACCEL={PROBE_ACCEL} | |
| {% if TARGET_TEMP > PROBE_TEMP %} | |
| { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) } | |
| M109 S{PROBE_TEMP} | |
| {% else %} | |
| {% if ACTUAL_TEMP > MAX_TEMP %} | |
| { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) } | |
| TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={MAX_TEMP} | |
| {% endif %} | |
| {% endif %} | |
| [gcode_macro _POST_PROBING] | |
| gcode = | |
| SET_KINEMATICS_LIMIT Z_ACCEL={printer["gcode_macro _TAP_SETTINGS"].max_z_accel} | |
| [gcode_macro _POST_PROBE] | |
| gcode = | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro SET_PROBE_TEMP] | |
| gcode = | |
| {% set temp = params.TEMP|int %} | |
| SAVE_VARIABLE VARIABLE=probe_temp VALUE={TEMP} | |
| [gcode_macro Z_TILT_ADJUST] | |
| rename_existing = Z_TILT_ADJUST_REAL | |
| gcode = | |
| Z_TILT_ADJUST_REAL | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| [gcode_macro _TAP_SETTINGS] | |
| variable_probe_accel = 15 | |
| variable_home_x = 175 | |
| variable_home_y = 175 | |
| variable_home_speed = 300 | |
| variable_max_z_accel = 500 | |
| gcode = | |
| [mcu] | |
| serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_JKYZ-if00 | |
| [danger_options] | |
| allow_plugin_override = True | |
| [printer] | |
| square_corner_velocity = 5.0 | |
| kinematics = limited_corexy | |
| max_velocity = 564 | |
| max_z_velocity = 100 | |
| max_accel = 10000 | |
| max_x_accel = 9000 | |
| max_y_accel = 8000 | |
| max_z_accel = 500 | |
| scale_xy_accel = True | |
| [thermistor NTC10K] | |
| temperature1 = 0.0 | |
| resistance1 = 32116.0 | |
| temperature2 = 40.0 | |
| resistance2 = 5309.0 | |
| temperature3 = 80.0 | |
| resistance3 = 1228.0 | |
| [stepper_x] | |
| step_pin = PE11 | |
| dir_pin = !PE10 | |
| enable_pin = !PE9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB14 | |
| position_min = 0 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| step_pulse_duration = 0.000004 | |
| [tmc2209 stepper_x] | |
| uart_pin = PE7 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_y] | |
| step_pin = PD8 | |
| dir_pin = PB12 | |
| enable_pin = !PD9 | |
| rotation_distance = 40 | |
| microsteps = 32 | |
| full_steps_per_rotation = 200 | |
| endstop_pin = ^PB13 | |
| position_min = 0 | |
| step_pulse_duration = 0.000004 | |
| position_endstop = 350 | |
| position_max = 350 | |
| homing_speed = 60 | |
| homing_retract_dist = 0 | |
| homing_positive_dir = true | |
| [tmc2209 stepper_y] | |
| uart_pin = PE15 | |
| interpolate = true | |
| run_current = 1.0 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| driver_tbl = 1 | |
| driver_toff = 8 | |
| driver_hstrt = 3 | |
| driver_hend = 10 | |
| [stepper_z] | |
| step_pin = PE2 | |
| dir_pin = PE4 | |
| enable_pin = !PE3 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| endstop_pin = probe:z_virtual_endstop | |
| position_max = 290 | |
| position_min = -5 | |
| homing_speed = 50 | |
| second_homing_speed = 10 | |
| homing_retract_dist = 3 | |
| [tmc2209 stepper_z] | |
| uart_pin = PC14 | |
| uart_address = 0 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z1] | |
| step_pin = PE6 | |
| dir_pin = PC13 | |
| enable_pin = !PE5 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z1] | |
| uart_pin = PA15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [stepper_z2] | |
| step_pin = PD12 | |
| dir_pin = PC4 | |
| enable_pin = !PE8 | |
| rotation_distance = 4 | |
| microsteps = 32 | |
| [tmc2209 stepper_z2] | |
| uart_pin = PC15 | |
| interpolate = True | |
| run_current = 1.0 | |
| hold_current = 1.0 | |
| sense_resistor = 0.110 | |
| stealthchop_threshold = 0 | |
| [extruder] | |
| step_pin = PD5 | |
| dir_pin = !PD6 | |
| enable_pin = !PD4 | |
| rotation_distance = 21.525 | |
| gear_ratio = 50:10 | |
| microsteps = 16 | |
| full_steps_per_rotation = 200 | |
| nozzle_diameter = 0.600 | |
| filament_diameter = 1.75 | |
| heater_pin = PB15 | |
| sensor_type = PT1000 | |
| sensor_pin = PC0 | |
| min_temp = 10 | |
| max_temp = 315 | |
| max_power = 1.0 | |
| min_extrude_temp = 170 | |
| heater_power = 115 | |
| cooling_fan = fan | |
| ambient_temp_sensor = heater_generic chamber_heater | |
| pressure_advance = 0.05 | |
| pressure_advance_smooth_time = 0.040 | |
| max_extrude_cross_section = 5 | |
| pid_version = 1 | |
| pid_target = 285.00 | |
| pid_tolerance = 0.0200 | |
| pid_kp = 18.086 | |
| pid_ki = 0.536 | |
| pid_kd = 152.599 | |
| control = mpc | |
| block_heat_capacity = 31.2858 | |
| sensor_responsiveness = 0.0630773 | |
| ambient_transfer = 0.238396 | |
| fan_ambient_transfer = 0.238396, 0.258204, 0.262609 | |
| [tmc2209 extruder] | |
| uart_pin = PD7 | |
| interpolate = true | |
| run_current = 0.65 | |
| hold_current = 0.5 | |
| sense_resistor = 0.110 | |
| [verify_heater extruder] | |
| hysteresis = 15 | |
| heating_gain = 0.5 | |
| check_gain_time = 120 | |
| [heater_bed] | |
| heater_pin = PB4 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PB0 | |
| max_power = 0.8 | |
| min_temp = 5 | |
| max_temp = 170 | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [probe] | |
| pin = !PA3 | |
| x_offset = 0 | |
| y_offset = 0 | |
| speed = 50.0 | |
| samples = 4 | |
| samples_result = median | |
| sample_retract_dist = 3.0 | |
| samples_tolerance = 0.05 | |
| samples_tolerance_retries = 5 | |
| deactivate_on_each_sample = True | |
| activate_gcode = | |
| _PRE_PROBE_CHECK | |
| deactivate_gcode = | |
| _POST_PROBING | |
| z_offset = -1.160 | |
| [heater_fan hotend_fan] | |
| pin = PA13 | |
| max_power = 1.0 | |
| kick_start_time = 0.5 | |
| heater = extruder | |
| heater_temp = 50.0 | |
| fan_speed = 1.0 | |
| [fan] | |
| pin = PA14 | |
| max_power = 0.4 | |
| kick_start_time = 0.5 | |
| off_below = 0.10 | |
| [neopixel my_neopixel] | |
| pin = PD3 | |
| chain_count = 26 | |
| color_order = GRBW | |
| initial_red = 0.2 | |
| initial_green = 0.2 | |
| initial_blue = 0.2 | |
| [idle_timeout] | |
| timeout = 9999999999 | |
| [bed_mesh] | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| mesh_min = 40, 40 | |
| mesh_max = 310,310 | |
| fade_start = 0.6 | |
| fade_end = 10.0 | |
| probe_count = 7,7 | |
| algorithm = bicubic | |
| adaptive_margin = 5 | |
| [z_tilt] | |
| z_positions = | |
| -50, 18 | |
| 150, 348 | |
| 350, 18 | |
| points = | |
| 30, 5 | |
| 175, 295 | |
| 320, 5 | |
| speed = 100 | |
| horizontal_move_z = 10 | |
| retries = 10 | |
| retry_tolerance = 0.007 | |
| [gcode_macro G32] | |
| gcode = | |
| BED_MESH_CLEAR | |
| G28 | |
| Z_TILT_ADJUST | |
| G28 | |
| G0 X175 Y175 Z30 F3600 | |
| [save_variables] | |
| filename = ~/printer_data/config/variables.cfg | |
| [gcode_macro PRINT_START] | |
| gcode = | |
| {% set chamber = printer.extruder.filament.chamber %} | |
| G28 | |
| HEAT_BED_AND_WAIT | |
| SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={printer.extruder.filament.chamber} | |
| TEMPERATURE_WAIT SENSOR="z_thermal_adjust" MINIMUM={printer.extruder.filament.chamber + 2} | |
| G28 Z | |
| BED_MESH_CALIBRATE | |
| POST_PROBE | |
| SET_GCODE_VARIABLE MACRO=_TAP_VARIABLES VARIABLE=brushed VALUE=0 | |
| G92 E0 | |
| G90 | |
| HEAT_EXTRUDER_AND_WAIT | |
| LINE_PURGE | |
| [gcode_macro PRINT_END] | |
| gcode = | |
| M400 | |
| G92 E0 | |
| G1 E-1.0 F3600 | |
| G91 | |
| G0 Z1.00 X20.0 Y20.0 F20000 | |
| TURN_OFF_HEATERS | |
| M107 | |
| G90 | |
| G0 X350 Y350 F3600 | |
| [exclude_object] | |
| [gcode_arcs] | |
| resolution = 0.1 | |
| [input_shaper] | |
| enabled_extruders = extruder | |
| smoother_freq_x = 56.6 | |
| shaper_type_x = smooth_ei | |
| smoother_freq_y = 30.8 | |
| shaper_type_y = smooth_ei | |
| [filaments] | |
| on_set_filament_gcode = | |
| M117 add | |
| on_clear_filament_gcode = | |
| M117 clear | |
| [z_thermal_adjust] | |
| temp_coeff = 0.005 | |
| smooth_time = 1 | |
| sensor_type = NTC10K | |
| sensor_pin = PC2 | |
| min_temp = 10 | |
| max_temp = 67 | |
| gcode_id = thermal_adjust | |
| [heater_generic chamber_heater] | |
| heater_pin = PC8 | |
| max_power = 1.0 | |
| sensor_type = Generic 3950 | |
| sensor_pin = PC3 | |
| min_temp = 10 | |
| max_temp = 67 | |
| pid_version = 1 | |
| pid_target = 60.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 64.228 | |
| pid_ki = 0.421 | |
| pid_kd = 2450.039 | |
| [heater_fan chamber_heater_fan] | |
| pin = PB2 | |
| max_power = 1.0 | |
| heater = chamber_heater | |
| heater_temp = 35 | |
| [verify_heater chamber_heater] | |
| hysteresis = 5 | |
| heating_gain = 0.1 | |
| check_gain_time = 480 | |
| [skew_correction] | |
| [pid_profile extruder abs] | |
| pid_version = 1 | |
| pid_target = 260.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 16.100 | |
| pid_ki = 1.058 | |
| pid_kd = 61.259 | |
| [pid_profile heater_bed abs] | |
| pid_version = 1 | |
| pid_target = 105.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 51.427 | |
| pid_ki = 1.894 | |
| pid_kd = 349.061 | |
| [skew_correction skew] | |
| xy_skew = 0.000 | |
| xz_skew = 0.000 | |
| yz_skew = 0.000 | |
| [pid_profile extruder pc] | |
| pid_version = 1 | |
| pid_target = 250.00 | |
| pid_tolerance = 0.0200 | |
| control = pid | |
| pid_kp = 17.627 | |
| pid_ki = 1.013 | |
| pid_kd = 76.678 | |
| [bed_mesh default] | |
| version = 1 | |
| points = | |
| -0.244063, -0.128750, -0.016563 | |
| 0.047500, 0.101562, 0.103125 | |
| 0.092500, 0.089062, 0.130000 | |
| -0.030625, -0.011875, 0.086875 | |
| x_count = 3 | |
| y_count = 4 | |
| mesh_x_pps = 2 | |
| mesh_y_pps = 2 | |
| algo = lagrange | |
| tension = 0.2 | |
| min_x = 137.37 | |
| max_x = 213.01 | |
| min_y = 110.52 | |
| max_y = 239.46 | |
| ======================= | |
| DEBUG: registering extruder | |
| Write g-code response | |
| Traceback (most recent call last): | |
| File "/home/orangepi/klipper/klippy/gcode.py", line 593, in _respond_raw | |
| os.write(self.fd, (msg + "\n").encode()) | |
| BlockingIOError: [Errno 11] Resource temporarily unavailable | |
| DEBUG: registering extruder#: extruder | |
| Extruder max_extrude_ratio=2.078758 | |
| mcu 'mcu': Starting serial connect | |
| webhooks client 547689122000: New connection | |
| webhooks client 547689122000: Client info {'program': 'Moonraker', 'version': 'v0.8.0-354-gba94285'} | |
| Loaded MCU 'mcu' 105 commands ( v0.10.0-557-gf7e29b27 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-12+11) 2.31.1) | |
| MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1 | |
| Sending MCU 'mcu' printer configuration... | |
| Configured MCU 'mcu' (1024 moves) | |
| Starting heater checks for extruder | |
| Starting heater checks for heater_bed | |
| bed_mesh: generated points | |
| Index | Tool Adjusted | Probe | |
| 0 | (40.0, 40.0) | (40.0, 40.0) | |
| 1 | (85.0, 40.0) | (85.0, 40.0) | |
| 2 | (130.0, 40.0) | (130.0, 40.0) | |
| 3 | (175.0, 40.0) | (175.0, 40.0) | |
| 4 | (220.0, 40.0) | (220.0, 40.0) | |
| 5 | (265.0, 40.0) | (265.0, 40.0) | |
| 6 | (310.0, 40.0) | (310.0, 40.0) | |
| 7 | (310.0, 85.0) | (310.0, 85.0) | |
| 8 | (265.0, 85.0) | (265.0, 85.0) | |
| 9 | (220.0, 85.0) | (220.0, 85.0) | |
| 10 | (175.0, 85.0) | (175.0, 85.0) | |
| 11 | (130.0, 85.0) | (130.0, 85.0) | |
| 12 | (85.0, 85.0) | (85.0, 85.0) | |
| 13 | (40.0, 85.0) | (40.0, 85.0) | |
| 14 | (40.0, 130.0) | (40.0, 130.0) | |
| 15 | (85.0, 130.0) | (85.0, 130.0) | |
| 16 | (130.0, 130.0) | (130.0, 130.0) | |
| 17 | (175.0, 130.0) | (175.0, 130.0) | |
| 18 | (220.0, 130.0) | (220.0, 130.0) | |
| 19 | (265.0, 130.0) | (265.0, 130.0) | |
| 20 | (310.0, 130.0) | (310.0, 130.0) | |
| 21 | (310.0, 175.0) | (310.0, 175.0) | |
| 22 | (265.0, 175.0) | (265.0, 175.0) | |
| 23 | (220.0, 175.0) | (220.0, 175.0) | |
| 24 | (175.0, 175.0) | (175.0, 175.0) | |
| 25 | (130.0, 175.0) | (130.0, 175.0) | |
| 26 | (85.0, 175.0) | (85.0, 175.0) | |
| 27 | (40.0, 175.0) | (40.0, 175.0) | |
| 28 | (40.0, 220.0) | (40.0, 220.0) | |
| 29 | (85.0, 220.0) | (85.0, 220.0) | |
| 30 | (130.0, 220.0) | (130.0, 220.0) | |
| 31 | (175.0, 220.0) | (175.0, 220.0) | |
| 32 | (220.0, 220.0) | (220.0, 220.0) | |
| 33 | (265.0, 220.0) | (265.0, 220.0) | |
| 34 | (310.0, 220.0) | (310.0, 220.0) | |
| 35 | (310.0, 265.0) | (310.0, 265.0) | |
| 36 | (265.0, 265.0) | (265.0, 265.0) | |
| 37 | (220.0, 265.0) | (220.0, 265.0) | |
| 38 | (175.0, 265.0) | (175.0, 265.0) | |
| 39 | (130.0, 265.0) | (130.0, 265.0) | |
| 40 | (85.0, 265.0) | (85.0, 265.0) | |
| 41 | (40.0, 265.0) | (40.0, 265.0) | |
| 42 | (40.0, 310.0) | (40.0, 310.0) | |
| 43 | (85.0, 310.0) | (85.0, 310.0) | |
| 44 | (130.0, 310.0) | (130.0, 310.0) | |
| 45 | (175.0, 310.0) | (175.0, 310.0) | |
| 46 | (220.0, 310.0) | (220.0, 310.0) | |
| 47 | (265.0, 310.0) | (265.0, 310.0) | |
| 48 | (310.0, 310.0) | (310.0, 310.0) | |
| Starting heater checks for chamber_heater | |
| autotune_tmc set stepper_x pwm_freq=2 | |
| autotune_tmc stepper_x ncycles=219 pfdcycles=-375 | |
| autotune_tmc set stepper_x tbl=1 | |
| autotune_tmc set stepper_x toff=8 | |
| autotune_tmc seting hysteresis based on 24.0 V | |
| dcoilblank = 0.016000, dcoilsd = 0.020408 | |
| hysteresis = 11, htotal = 11, hstrt = 8, hend = 3 | |
| autotune_tmc set stepper_x hstrt=7 | |
| autotune_tmc set stepper_x hend=6 | |
| autotune_tmc set stepper_x sgthrs=40 | |
| autotune_tmc using max PWM speed 211.903439 | |
| autotune_tmc set stepper_x pwm_autoscale=True | |
| autotune_tmc set stepper_x pwm_autograd=True | |
| autotune_tmc set stepper_x pwm_grad=14 | |
| autotune_tmc set stepper_x pwm_ofs=22 | |
| autotune_tmc set stepper_x pwm_reg=15 | |
| autotune_tmc set stepper_x pwm_lim=4 | |
| autotune_tmc set stepper_x tpwmthrs=1048575 | |
| autotune_tmc set stepper_x en_spreadcycle=True | |
| autotune_tmc set stepper_x tcoolthrs=391(24.0) | |
| autotune_tmc set stepper_x semin=2 | |
| autotune_tmc set stepper_x semax=4 | |
| autotune_tmc set stepper_x seup=3 | |
| autotune_tmc set stepper_x sedn=2 | |
| autotune_tmc set stepper_x seimin=1 | |
| autotune_tmc set stepper_x iholddelay=12 | |
| autotune_tmc set stepper_x multistep_filt=True | |
| autotune_tmc set stepper_y pwm_freq=2 | |
| autotune_tmc stepper_y ncycles=219 pfdcycles=-375 | |
| autotune_tmc set stepper_y tbl=1 | |
| autotune_tmc set stepper_y toff=8 | |
| autotune_tmc seting hysteresis based on 24.0 V | |
| dcoilblank = 0.016000, dcoilsd = 0.020408 | |
| hysteresis = 11, htotal = 11, hstrt = 8, hend = 3 | |
| autotune_tmc set stepper_y hstrt=7 | |
| autotune_tmc set stepper_y hend=6 | |
| autotune_tmc set stepper_y sgthrs=40 | |
| autotune_tmc using max PWM speed 211.903439 | |
| autotune_tmc set stepper_y pwm_autoscale=True | |
| autotune_tmc set stepper_y pwm_autograd=True | |
| autotune_tmc set stepper_y pwm_grad=14 | |
| autotune_tmc set stepper_y pwm_ofs=22 | |
| autotune_tmc set stepper_y pwm_reg=15 | |
| autotune_tmc set stepper_y pwm_lim=4 | |
| autotune_tmc set stepper_y tpwmthrs=1048575 | |
| autotune_tmc set stepper_y en_spreadcycle=True | |
| autotune_tmc set stepper_y tcoolthrs=391(24.0) | |
| autotune_tmc set stepper_y semin=2 | |
| autotune_tmc set stepper_y semax=4 | |
| autotune_tmc set stepper_y seup=3 | |
| autotune_tmc set stepper_y sedn=2 | |
| autotune_tmc set stepper_y seimin=1 | |
| autotune_tmc set stepper_y iholddelay=12 | |
| autotune_tmc set stepper_y multistep_filt=True | |
| autotune_tmc set extruder pwm_freq=2 | |
| autotune_tmc extruder ncycles=219 pfdcycles=73 | |
| autotune_tmc set extruder tbl=1 | |
| autotune_tmc set extruder toff=1 | |
| autotune_tmc seting hysteresis based on 24.0 V | |
| dcoilblank = 0.034043, dcoilsd = 0.006349 | |
| hysteresis = 24, htotal = 14, hstrt = 8, hend = 6 | |
| autotune_tmc set extruder hstrt=7 | |
| autotune_tmc set extruder hend=9 | |
| autotune_tmc set extruder sgthrs=40 | |
| autotune_tmc using max PWM speed 322.026154 | |
| autotune_tmc set extruder pwm_autoscale=True | |
| autotune_tmc set extruder pwm_autograd=True | |
| autotune_tmc set extruder pwm_grad=5 | |
| autotune_tmc set extruder pwm_ofs=20 | |
| autotune_tmc set extruder pwm_reg=15 | |
| autotune_tmc set extruder pwm_lim=4 | |
| autotune_tmc set extruder tpwmthrs=1048575 | |
| autotune_tmc set extruder en_spreadcycle=True | |
| autotune_tmc set extruder tcoolthrs=78(12.915) | |
| autotune_tmc set extruder semin=2 | |
| autotune_tmc set extruder semax=4 | |
| autotune_tmc set extruder seup=3 | |
| autotune_tmc set extruder sedn=2 | |
| autotune_tmc set extruder seimin=1 | |
| autotune_tmc set extruder iholddelay=12 | |
| autotune_tmc set extruder multistep_filt=True | |
| Stats 617120.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000038 bytes_write=5347 bytes_read=8765 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006131 heater_bed: target=0 temp=104.4 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.40 cputime=6667.609 memavail=3613016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.9 pwm=0.000 | |
| Stats 617121.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000038 bytes_write=5380 bytes_read=8989 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180041235 heater_bed: target=0 temp=104.3 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.37 cputime=6667.667 memavail=3613036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.9 pwm=0.000 | |
| Stats 617122.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000038 bytes_write=5386 bytes_read=9193 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180021669 heater_bed: target=0 temp=104.2 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.37 cputime=6667.687 memavail=3612996 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.7 pwm=0.000 | |
| Stats 617123.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000038 bytes_write=5392 bytes_read=9398 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180025074 heater_bed: target=0 temp=104.0 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.37 cputime=6667.708 memavail=3613076 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.8 pwm=0.000 | |
| Stats 617124.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000038 bytes_write=5398 bytes_read=9617 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180011280 heater_bed: target=0 temp=103.9 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.37 cputime=6667.729 memavail=3612892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.2 pwm=0.000 | |
| Stats 617125.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=5404 bytes_read=9836 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180013696 heater_bed: target=0 temp=103.7 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.37 cputime=6667.751 memavail=3613224 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.8 pwm=0.000 | |
| Stats 617126.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=5410 bytes_read=10041 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180007248 heater_bed: target=0 temp=103.5 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.42 cputime=6667.772 memavail=3612976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000 | |
| Stats 617127.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=5416 bytes_read=10260 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005394 heater_bed: target=0 temp=103.4 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.42 cputime=6667.795 memavail=3612848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.6 pwm=0.000 | |
| Stats 617128.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=5422 bytes_read=10464 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180008698 heater_bed: target=0 temp=103.3 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.42 cputime=6667.817 memavail=3612992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.7 pwm=0.000 | |
| Stats 617129.3: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=5428 bytes_read=10669 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180010332 heater_bed: target=0 temp=103.1 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.42 cputime=6667.838 memavail=3613168 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.7 pwm=0.000 | |
| Stats 617130.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5434 bytes_read=10902 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180010145 heater_bed: target=0 temp=103.0 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.42 cputime=6667.861 memavail=3613060 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.8 pwm=0.000 | |
| Stats 617131.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5440 bytes_read=11106 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180009280 heater_bed: target=0 temp=102.9 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.39 cputime=6667.883 memavail=3612968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.8 pwm=0.000 | |
| Stats 617132.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5446 bytes_read=11311 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180007843 heater_bed: target=0 temp=102.6 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.39 cputime=6667.905 memavail=3612856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.7 pwm=0.000 | |
| Stats 617133.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5452 bytes_read=11530 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180007901 heater_bed: target=0 temp=102.5 pwm=0.000 z_thermal_adjust: temp=58.9 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.39 cputime=6667.927 memavail=3613056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.4 pwm=0.000 | |
| Stats 617134.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5458 bytes_read=11734 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180008095 heater_bed: target=0 temp=102.3 pwm=0.000 z_thermal_adjust: temp=58.8 chamber_heater: target=0 temp=55.6 pwm=0.000 sysload=2.39 cputime=6667.948 memavail=3612944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.1 pwm=0.000 | |
| Stats 617135.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5464 bytes_read=11953 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180008605 heater_bed: target=0 temp=102.1 pwm=0.000 z_thermal_adjust: temp=58.8 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.39 cputime=6667.970 memavail=3612808 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.7 pwm=0.000 | |
| Stats 617136.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5470 bytes_read=12172 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180007070 heater_bed: target=0 temp=101.9 pwm=0.000 z_thermal_adjust: temp=58.7 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.44 cputime=6667.992 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.4 pwm=0.000 | |
| Stats 617137.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5476 bytes_read=12376 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006836 heater_bed: target=0 temp=101.8 pwm=0.000 z_thermal_adjust: temp=58.6 chamber_heater: target=0 temp=55.5 pwm=0.000 sysload=2.44 cputime=6668.013 memavail=3613128 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.0 pwm=0.000 | |
| Stats 617138.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5482 bytes_read=12572 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006822 heater_bed: target=0 temp=101.6 pwm=0.000 z_thermal_adjust: temp=58.5 chamber_heater: target=0 temp=55.4 pwm=0.000 sysload=2.44 cputime=6668.034 memavail=3612944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.7 pwm=0.000 | |
| Stats 617139.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5488 bytes_read=12779 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006939 heater_bed: target=0 temp=101.4 pwm=0.000 z_thermal_adjust: temp=58.4 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.44 cputime=6668.057 memavail=3612800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.1 pwm=0.000 | |
| Stats 617140.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5494 bytes_read=12997 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006395 heater_bed: target=0 temp=101.3 pwm=0.000 z_thermal_adjust: temp=58.2 chamber_heater: target=0 temp=55.3 pwm=0.000 sysload=2.44 cputime=6668.079 memavail=3613008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.7 pwm=0.000 | |
| Stats 617141.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5500 bytes_read=13202 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006360 heater_bed: target=0 temp=101.1 pwm=0.000 z_thermal_adjust: temp=58.1 chamber_heater: target=0 temp=55.2 pwm=0.000 sysload=2.48 cputime=6668.100 memavail=3612984 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.1 pwm=0.000 | |
| Stats 617142.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5506 bytes_read=13421 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006319 heater_bed: target=0 temp=100.9 pwm=0.000 z_thermal_adjust: temp=58.0 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.48 cputime=6668.121 memavail=3613160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.6 pwm=0.000 | |
| Stats 617143.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5512 bytes_read=13625 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006213 heater_bed: target=0 temp=100.7 pwm=0.000 z_thermal_adjust: temp=57.9 chamber_heater: target=0 temp=55.1 pwm=0.000 sysload=2.48 cputime=6668.143 memavail=3613080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.9 pwm=0.000 | |
| Stats 617144.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5518 bytes_read=13830 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005928 heater_bed: target=0 temp=100.4 pwm=0.000 z_thermal_adjust: temp=57.8 chamber_heater: target=0 temp=55.0 pwm=0.000 sysload=2.48 cputime=6668.164 memavail=3613040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.5 pwm=0.000 | |
| Stats 617145.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5524 bytes_read=14063 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005996 heater_bed: target=0 temp=100.3 pwm=0.000 z_thermal_adjust: temp=57.6 chamber_heater: target=0 temp=54.9 pwm=0.000 sysload=2.48 cputime=6668.187 memavail=3613096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.0 pwm=0.000 | |
| Stats 617146.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5530 bytes_read=14267 bytes_retransmit=9 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006121 heater_bed: target=0 temp=100.1 pwm=0.000 z_thermal_adjust: temp=57.5 chamber_heater: target=0 temp=54.9 pwm=0.000 sysload=2.52 cputime=6668.209 memavail=3613128 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.2 pwm=0.000 | |
| Stats 617147.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5536 bytes_read=14472 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006015 heater_bed: target=0 temp=100.0 pwm=0.000 z_thermal_adjust: temp=57.4 chamber_heater: target=0 temp=54.8 pwm=0.000 sysload=2.52 cputime=6668.229 memavail=3613040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.7 pwm=0.000 | |
| Stats 617148.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5542 bytes_read=14691 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005577 heater_bed: target=0 temp=99.8 pwm=0.000 z_thermal_adjust: temp=57.2 chamber_heater: target=0 temp=54.7 pwm=0.000 sysload=2.52 cputime=6668.250 memavail=3612904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.1 pwm=0.000 | |
| Stats 617149.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5548 bytes_read=14895 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005485 heater_bed: target=0 temp=99.7 pwm=0.000 z_thermal_adjust: temp=57.1 chamber_heater: target=0 temp=54.6 pwm=0.000 sysload=2.52 cputime=6668.271 memavail=3613016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.6 pwm=0.000 | |
| Stats 617150.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5554 bytes_read=15114 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005192 heater_bed: target=0 temp=99.5 pwm=0.000 z_thermal_adjust: temp=57.0 chamber_heater: target=0 temp=54.5 pwm=0.000 sysload=2.52 cputime=6668.292 memavail=3613076 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.9 pwm=0.000 | |
| Stats 617151.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5560 bytes_read=15347 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005057 heater_bed: target=0 temp=99.4 pwm=0.000 z_thermal_adjust: temp=56.9 chamber_heater: target=0 temp=54.4 pwm=0.000 sysload=2.56 cputime=6668.315 memavail=3613212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.1 pwm=0.000 | |
| Stats 617152.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5566 bytes_read=15537 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005295 heater_bed: target=0 temp=99.3 pwm=0.000 z_thermal_adjust: temp=56.7 chamber_heater: target=0 temp=54.3 pwm=0.000 sysload=2.56 cputime=6668.336 memavail=3613164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.7 pwm=0.000 | |
| Stats 617153.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5572 bytes_read=15742 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180005095 heater_bed: target=0 temp=99.1 pwm=0.000 z_thermal_adjust: temp=56.6 chamber_heater: target=0 temp=54.2 pwm=0.000 sysload=2.56 cputime=6668.358 memavail=3613012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000 | |
| Stats 617154.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5584 bytes_read=15991 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004944 heater_bed: target=0 temp=99.0 pwm=0.000 z_thermal_adjust: temp=56.5 chamber_heater: target=0 temp=54.1 pwm=0.000 sysload=2.56 cputime=6668.381 memavail=3613116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.2 pwm=0.000 | |
| Stats 617155.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5590 bytes_read=16197 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004805 heater_bed: target=0 temp=98.9 pwm=0.000 z_thermal_adjust: temp=56.3 chamber_heater: target=0 temp=54.0 pwm=0.000 sysload=2.56 cputime=6668.404 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.8 pwm=0.000 | |
| Stats 617156.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5596 bytes_read=16405 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004671 heater_bed: target=0 temp=98.7 pwm=0.000 z_thermal_adjust: temp=56.2 chamber_heater: target=0 temp=54.0 pwm=0.000 sysload=2.60 cputime=6668.425 memavail=3613064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.0 pwm=0.000 | |
| Stats 617157.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5602 bytes_read=16642 bytes_retransmit=9 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004406 heater_bed: target=0 temp=98.6 pwm=0.000 z_thermal_adjust: temp=56.1 chamber_heater: target=0 temp=53.8 pwm=0.000 sysload=2.60 cputime=6668.448 memavail=3613056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.3 pwm=0.000 | |
| Stats 617158.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5608 bytes_read=16835 bytes_retransmit=9 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004211 heater_bed: target=0 temp=98.4 pwm=0.000 z_thermal_adjust: temp=56.0 chamber_heater: target=0 temp=53.8 pwm=0.000 sysload=2.60 cputime=6668.471 memavail=3613040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.8 pwm=0.000 | |
| Stats 617159.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5614 bytes_read=17043 bytes_retransmit=9 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004423 heater_bed: target=0 temp=98.3 pwm=0.000 z_thermal_adjust: temp=55.9 chamber_heater: target=0 temp=53.7 pwm=0.000 sysload=2.60 cputime=6668.492 memavail=3613136 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.1 pwm=0.000 | |
| Stats 617160.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5620 bytes_read=17294 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004308 heater_bed: target=0 temp=98.2 pwm=0.000 z_thermal_adjust: temp=55.7 chamber_heater: target=0 temp=53.6 pwm=0.000 sysload=2.60 cputime=6668.516 memavail=3612896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.3 pwm=0.000 | |
| Stats 617161.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5626 bytes_read=17487 bytes_retransmit=9 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004249 heater_bed: target=0 temp=98.1 pwm=0.000 z_thermal_adjust: temp=55.6 chamber_heater: target=0 temp=53.5 pwm=0.000 sysload=2.55 cputime=6668.538 memavail=3613216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.8 pwm=0.000 | |
| Stats 617162.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5632 bytes_read=17699 bytes_retransmit=9 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004150 heater_bed: target=0 temp=97.9 pwm=0.000 z_thermal_adjust: temp=55.5 chamber_heater: target=0 temp=53.4 pwm=0.000 sysload=2.55 cputime=6668.560 memavail=3613144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.2 pwm=0.000 | |
| Stats 617163.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5638 bytes_read=17910 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004357 heater_bed: target=0 temp=97.8 pwm=0.000 z_thermal_adjust: temp=55.4 chamber_heater: target=0 temp=53.3 pwm=0.000 sysload=2.55 cputime=6668.582 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.5 pwm=0.000 | |
| Stats 617164.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5644 bytes_read=18103 bytes_retransmit=9 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004097 heater_bed: target=0 temp=97.7 pwm=0.000 z_thermal_adjust: temp=55.3 chamber_heater: target=0 temp=53.2 pwm=0.000 sysload=2.55 cputime=6668.603 memavail=3613056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.7 pwm=0.000 | |
| Stats 617165.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5650 bytes_read=18340 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004029 heater_bed: target=0 temp=97.6 pwm=0.000 z_thermal_adjust: temp=55.1 chamber_heater: target=0 temp=53.1 pwm=0.000 sysload=2.55 cputime=6668.625 memavail=3613000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.7 pwm=0.000 | |
| Stats 617166.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5656 bytes_read=18562 bytes_retransmit=9 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004172 heater_bed: target=0 temp=97.4 pwm=0.000 z_thermal_adjust: temp=55.0 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=2.59 cputime=6668.645 memavail=3612896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.5 pwm=0.000 | |
| Stats 617167.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5662 bytes_read=18755 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004369 heater_bed: target=0 temp=97.3 pwm=0.000 z_thermal_adjust: temp=54.9 chamber_heater: target=0 temp=53.0 pwm=0.000 sysload=2.59 cputime=6668.666 memavail=3612960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.0 pwm=0.000 | |
| Stats 617168.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5668 bytes_read=18978 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004350 heater_bed: target=0 temp=97.2 pwm=0.000 z_thermal_adjust: temp=54.8 chamber_heater: target=0 temp=52.9 pwm=0.000 sysload=2.59 cputime=6668.688 memavail=3613064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.5 pwm=0.000 | |
| Stats 617169.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5674 bytes_read=19200 bytes_retransmit=9 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004185 heater_bed: target=0 temp=97.1 pwm=0.000 z_thermal_adjust: temp=54.7 chamber_heater: target=0 temp=52.8 pwm=0.000 sysload=2.59 cputime=6668.711 memavail=3612984 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.5 pwm=0.000 | |
| Stats 617170.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5680 bytes_read=19407 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004352 heater_bed: target=0 temp=97.0 pwm=0.000 z_thermal_adjust: temp=54.6 chamber_heater: target=0 temp=52.7 pwm=0.000 sysload=2.59 cputime=6668.732 memavail=3612960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.1 pwm=0.000 | |
| Stats 617171.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5686 bytes_read=19630 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=96.9 pwm=0.000 z_thermal_adjust: temp=54.5 chamber_heater: target=0 temp=52.6 pwm=0.000 sysload=2.54 cputime=6668.754 memavail=3613096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.5 pwm=0.000 | |
| Stats 617172.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5692 bytes_read=19852 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004148 heater_bed: target=0 temp=96.8 pwm=0.000 z_thermal_adjust: temp=54.4 chamber_heater: target=0 temp=52.5 pwm=0.000 sysload=2.54 cputime=6668.776 memavail=3613072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.7 pwm=0.000 | |
| Stats 617173.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5698 bytes_read=20045 bytes_retransmit=9 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004003 heater_bed: target=0 temp=96.6 pwm=0.000 z_thermal_adjust: temp=54.3 chamber_heater: target=0 temp=52.4 pwm=0.000 sysload=2.54 cputime=6668.797 memavail=3613008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.0 pwm=0.000 | |
| Stats 617174.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5704 bytes_read=20283 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004098 heater_bed: target=0 temp=96.5 pwm=0.000 z_thermal_adjust: temp=54.2 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.54 cputime=6668.821 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.6 pwm=0.000 | |
| Stats 617175.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5710 bytes_read=20504 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004253 heater_bed: target=0 temp=96.4 pwm=0.000 z_thermal_adjust: temp=54.1 chamber_heater: target=0 temp=52.3 pwm=0.000 sysload=2.54 cputime=6668.844 memavail=3613128 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.0 pwm=0.000 | |
| Stats 617176.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5716 bytes_read=20697 bytes_retransmit=9 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004401 heater_bed: target=0 temp=96.3 pwm=0.000 z_thermal_adjust: temp=54.0 chamber_heater: target=0 temp=52.2 pwm=0.000 sysload=2.58 cputime=6668.866 memavail=3613200 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.3 pwm=0.000 | |
| Stats 617177.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5722 bytes_read=20935 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004448 heater_bed: target=0 temp=96.2 pwm=0.000 z_thermal_adjust: temp=53.9 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6668.889 memavail=3613088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.8 pwm=0.000 | |
| Stats 617178.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5728 bytes_read=21142 bytes_retransmit=9 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004513 heater_bed: target=0 temp=96.1 pwm=0.000 z_thermal_adjust: temp=53.8 chamber_heater: target=0 temp=52.0 pwm=0.000 sysload=2.58 cputime=6668.911 memavail=3613008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.9 pwm=0.000 | |
| Stats 617179.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5734 bytes_read=21335 bytes_retransmit=9 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004614 heater_bed: target=0 temp=96.0 pwm=0.000 z_thermal_adjust: temp=53.7 chamber_heater: target=0 temp=51.9 pwm=0.000 sysload=2.58 cputime=6668.933 memavail=3613132 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.5 pwm=0.000 | |
| Stats 617180.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5740 bytes_read=21587 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004637 heater_bed: target=0 temp=95.9 pwm=0.000 z_thermal_adjust: temp=53.6 chamber_heater: target=0 temp=51.8 pwm=0.000 sysload=2.58 cputime=6668.957 memavail=3613104 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.8 pwm=0.000 | |
| Stats 617181.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5746 bytes_read=21794 bytes_retransmit=9 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004629 heater_bed: target=0 temp=95.8 pwm=0.000 z_thermal_adjust: temp=53.5 chamber_heater: target=0 temp=51.7 pwm=0.000 sysload=2.53 cputime=6668.980 memavail=3613024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.2 pwm=0.000 | |
| Stats 617182.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5752 bytes_read=21987 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004575 heater_bed: target=0 temp=95.7 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=51.7 pwm=0.000 sysload=2.53 cputime=6669.001 memavail=3613008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.7 pwm=0.000 | |
| Stats 617183.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5758 bytes_read=22225 bytes_retransmit=9 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004430 heater_bed: target=0 temp=95.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=51.6 pwm=0.000 sysload=2.53 cputime=6669.025 memavail=3613024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.1 pwm=0.000 | |
| Stats 617184.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5764 bytes_read=22432 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004216 heater_bed: target=0 temp=95.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=51.5 pwm=0.000 sysload=2.53 cputime=6669.047 memavail=3613032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.3 pwm=0.000 | |
| Stats 617185.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5770 bytes_read=22639 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004017 heater_bed: target=0 temp=95.4 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=51.4 pwm=0.000 sysload=2.53 cputime=6669.070 memavail=3613088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.7 pwm=0.000 | |
| Stats 617186.3: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5776 bytes_read=22862 bytes_retransmit=9 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004154 heater_bed: target=0 temp=95.3 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=51.3 pwm=0.000 sysload=2.57 cputime=6669.092 memavail=3613192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.3 pwm=0.000 | |
| Stats 617187.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5782 bytes_read=23062 bytes_retransmit=9 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004219 heater_bed: target=0 temp=95.3 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=51.3 pwm=0.000 sysload=2.57 cputime=6669.115 memavail=3613080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.7 pwm=0.000 | |
| Stats 617188.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5788 bytes_read=23255 bytes_retransmit=9 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004338 heater_bed: target=0 temp=95.2 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=51.2 pwm=0.000 sysload=2.57 cputime=6669.138 memavail=3613224 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.1 pwm=0.000 | |
| Stats 617189.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5794 bytes_read=23493 bytes_retransmit=9 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004263 heater_bed: target=0 temp=95.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=51.1 pwm=0.000 sysload=2.57 cputime=6669.161 memavail=3613084 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.6 pwm=0.000 | |
| Stats 617190.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5800 bytes_read=23714 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004151 heater_bed: target=0 temp=95.0 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=51.0 pwm=0.000 sysload=2.57 cputime=6669.183 memavail=3613088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.0 pwm=0.000 | |
| Stats 617191.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5806 bytes_read=23907 bytes_retransmit=9 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004261 heater_bed: target=0 temp=95.0 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=50.9 pwm=0.000 sysload=2.60 cputime=6669.205 memavail=3613176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.3 pwm=0.000 | |
| Stats 617192.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5812 bytes_read=24145 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004309 heater_bed: target=0 temp=94.8 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=50.9 pwm=0.000 sysload=2.60 cputime=6669.227 memavail=3613072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.1 pwm=0.000 | |
| Stats 617193.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5818 bytes_read=24352 bytes_retransmit=9 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004350 heater_bed: target=0 temp=94.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=50.8 pwm=0.000 sysload=2.60 cputime=6669.250 memavail=3613184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.3 pwm=0.000 | |
| Stats 617194.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5824 bytes_read=24545 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004320 heater_bed: target=0 temp=94.7 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=50.8 pwm=0.000 sysload=2.60 cputime=6669.272 memavail=3612984 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.9 pwm=0.000 | |
| Stats 617195.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5830 bytes_read=24797 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004393 heater_bed: target=0 temp=94.6 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=50.7 pwm=0.000 sysload=2.60 cputime=6669.296 memavail=3613048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000 | |
| Stats 617196.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5836 bytes_read=25004 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004302 heater_bed: target=0 temp=94.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.6 pwm=0.000 sysload=2.79 cputime=6669.317 memavail=3613376 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.8 pwm=0.000 | |
| Stats 617197.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5842 bytes_read=25197 bytes_retransmit=9 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004352 heater_bed: target=0 temp=94.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=2.79 cputime=6669.340 memavail=3613064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.3 pwm=0.000 | |
| Stats 617198.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5848 bytes_read=25435 bytes_retransmit=9 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004279 heater_bed: target=0 temp=94.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=50.5 pwm=0.000 sysload=2.79 cputime=6669.363 memavail=3613028 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.8 pwm=0.000 | |
| Stats 617199.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5854 bytes_read=25642 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004375 heater_bed: target=0 temp=94.3 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=50.4 pwm=0.000 sysload=2.79 cputime=6669.387 memavail=3613140 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000 | |
| Stats 617200.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5860 bytes_read=25849 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004329 heater_bed: target=0 temp=94.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=50.3 pwm=0.000 sysload=2.79 cputime=6669.408 memavail=3613048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.7 pwm=0.000 | |
| Stats 617201.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5866 bytes_read=26087 bytes_retransmit=9 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004163 heater_bed: target=0 temp=94.1 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=50.2 pwm=0.000 sysload=2.81 cputime=6669.432 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.3 pwm=0.000 | |
| Stats 617202.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5872 bytes_read=26294 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004231 heater_bed: target=0 temp=94.1 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=2.81 cputime=6669.454 memavail=3613184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.6 pwm=0.000 | |
| Stats 617203.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5878 bytes_read=26487 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=94.0 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=50.1 pwm=0.000 sysload=2.81 cputime=6669.475 memavail=3613144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000 | |
| Stats 617204.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5884 bytes_read=26725 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004269 heater_bed: target=0 temp=93.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=50.0 pwm=0.000 sysload=2.81 cputime=6669.497 memavail=3613048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.5 pwm=0.000 | |
| Stats 617205.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5890 bytes_read=26946 bytes_retransmit=9 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004134 heater_bed: target=0 temp=93.8 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=2.81 cputime=6669.520 memavail=3613112 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.9 pwm=0.000 | |
| Stats 617206.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5896 bytes_read=27139 bytes_retransmit=9 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=93.8 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=49.9 pwm=0.000 sysload=2.75 cputime=6669.540 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.5 pwm=0.000 | |
| Stats 617207.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5902 bytes_read=27377 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003872 heater_bed: target=0 temp=93.7 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=2.75 cputime=6669.562 memavail=3613216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.1 pwm=0.000 | |
| Stats 617208.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5908 bytes_read=27584 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003740 heater_bed: target=0 temp=93.6 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=49.8 pwm=0.000 sysload=2.75 cputime=6669.583 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.6 pwm=0.000 | |
| Stats 617209.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5914 bytes_read=27777 bytes_retransmit=9 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003745 heater_bed: target=0 temp=93.5 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=49.7 pwm=0.000 sysload=2.75 cputime=6669.603 memavail=3613268 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000 | |
| Stats 617210.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5920 bytes_read=28014 bytes_retransmit=9 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003611 heater_bed: target=0 temp=93.4 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.75 cputime=6669.626 memavail=3613136 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.6 pwm=0.000 | |
| Stats 617211.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5926 bytes_read=28215 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003567 heater_bed: target=0 temp=93.4 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.77 cputime=6669.649 memavail=3613160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.0 pwm=0.000 | |
| Stats 617212.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5932 bytes_read=28408 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003518 heater_bed: target=0 temp=93.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.77 cputime=6669.670 memavail=3613136 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.7 pwm=0.000 | |
| Stats 617213.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5938 bytes_read=28646 bytes_retransmit=9 bytes_invalid=0 send_seq=482 receive_seq=482 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003456 heater_bed: target=0 temp=93.2 pwm=0.000 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.77 cputime=6669.693 memavail=3613088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.1 pwm=0.000 | |
| Stats 617214.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5944 bytes_read=28853 bytes_retransmit=9 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003407 heater_bed: target=0 temp=93.2 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.77 cputime=6669.714 memavail=3613080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000 | |
| Stats 617215.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5956 bytes_read=29076 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003246 heater_bed: target=0 temp=93.1 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6669.737 memavail=3613344 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.2 pwm=0.000 | |
| Stats 617216.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5962 bytes_read=29314 bytes_retransmit=9 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003169 heater_bed: target=0 temp=93.0 pwm=0.000 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6669.759 memavail=3613056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000 | |
| Stats 617217.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5968 bytes_read=29521 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003323 heater_bed: target=0 temp=93.0 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6669.781 memavail=3613112 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.1 pwm=0.000 | |
| Stats 617218.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5974 bytes_read=29714 bytes_retransmit=9 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003364 heater_bed: target=0 temp=92.9 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.70 cputime=6669.802 memavail=3613064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.0 pwm=0.000 | |
| Stats 617219.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5980 bytes_read=29952 bytes_retransmit=9 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003468 heater_bed: target=0 temp=92.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.70 cputime=6669.825 memavail=3613152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000 | |
| Stats 617220.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5986 bytes_read=30173 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003483 heater_bed: target=0 temp=92.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.70 cputime=6669.846 memavail=3613084 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.9 pwm=0.000 | |
| Stats 617221.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5992 bytes_read=30366 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 heater_bed: target=0 temp=92.7 pwm=0.000 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.65 cputime=6669.867 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000 | |
| Stats 617222.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5998 bytes_read=30604 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 heater_bed: target=0 temp=92.6 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6669.890 memavail=3613036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.1 pwm=0.000 | |
| Stats 617223.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6004 bytes_read=30811 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 heater_bed: target=0 temp=92.6 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.65 cputime=6669.913 memavail=3612608 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.6 pwm=0.000 | |
| Stats 617224.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6010 bytes_read=31004 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003706 heater_bed: target=0 temp=92.5 pwm=0.000 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.65 cputime=6669.933 memavail=3612692 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.0 pwm=0.000 | |
| Stats 617225.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6016 bytes_read=31256 bytes_retransmit=9 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003629 heater_bed: target=0 temp=92.5 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.65 cputime=6669.956 memavail=3612772 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.8 pwm=0.000 | |
| Stats 617226.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6022 bytes_read=31463 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003626 heater_bed: target=0 temp=92.4 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.68 cputime=6669.977 memavail=3612524 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.1 pwm=0.000 | |
| Stats 617227.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6028 bytes_read=31656 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003596 heater_bed: target=0 temp=92.3 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.68 cputime=6669.997 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000 | |
| Stats 617228.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6034 bytes_read=31894 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 heater_bed: target=0 temp=92.3 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.68 cputime=6670.019 memavail=3612956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.4 pwm=0.000 | |
| Stats 617229.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6040 bytes_read=32101 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003609 heater_bed: target=0 temp=92.2 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.68 cputime=6670.041 memavail=3612916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.9 pwm=0.000 | |
| Stats 617230.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6046 bytes_read=32308 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=92.2 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.68 cputime=6670.062 memavail=3612744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.5 pwm=0.000 | |
| Stats 617231.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6052 bytes_read=32546 bytes_retransmit=9 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003752 heater_bed: target=0 temp=92.1 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.70 cputime=6670.085 memavail=3612720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000 | |
| Stats 617232.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6058 bytes_read=32753 bytes_retransmit=9 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003737 heater_bed: target=0 temp=92.0 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.70 cputime=6670.106 memavail=3612576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000 | |
| Stats 617233.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6064 bytes_read=32944 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=92.0 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.70 cputime=6670.126 memavail=3612704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.5 pwm=0.000 | |
| Stats 617234.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6070 bytes_read=33166 bytes_retransmit=9 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003763 heater_bed: target=0 temp=91.9 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.70 cputime=6670.148 memavail=3612576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.0 pwm=0.000 | |
| Stats 617235.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6076 bytes_read=33385 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003661 heater_bed: target=0 temp=91.8 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.70 cputime=6670.171 memavail=3612736 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.7 pwm=0.000 | |
| Stats 617236.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6082 bytes_read=33578 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003586 heater_bed: target=0 temp=91.8 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6670.192 memavail=3612416 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.2 pwm=0.000 | |
| Stats 617237.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6088 bytes_read=33816 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003513 heater_bed: target=0 temp=91.7 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.65 cputime=6670.214 memavail=3612576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000 | |
| Stats 617238.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6094 bytes_read=34023 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003420 heater_bed: target=0 temp=91.7 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.65 cputime=6670.234 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.5 pwm=0.000 | |
| Stats 617239.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6100 bytes_read=34231 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003481 heater_bed: target=0 temp=91.6 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.65 cputime=6670.255 memavail=3612568 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.2 pwm=0.000 | |
| Stats 617240.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6106 bytes_read=34468 bytes_retransmit=9 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003604 heater_bed: target=0 temp=91.6 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.65 cputime=6670.277 memavail=3612784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.9 pwm=0.000 | |
| Stats 617241.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6112 bytes_read=34675 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=91.6 pwm=0.000 z_thermal_adjust: temp=49.9 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.67 cputime=6670.299 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.6 pwm=0.000 | |
| Stats 617242.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6118 bytes_read=34883 bytes_retransmit=9 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003672 heater_bed: target=0 temp=91.5 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.67 cputime=6670.320 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.2 pwm=0.000 | |
| Stats 617243.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6124 bytes_read=35106 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 heater_bed: target=0 temp=91.5 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.67 cputime=6670.341 memavail=3612672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.0 pwm=0.000 | |
| Stats 617244.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6130 bytes_read=35313 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003800 heater_bed: target=0 temp=91.4 pwm=0.000 z_thermal_adjust: temp=50.0 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.67 cputime=6670.362 memavail=3612656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.5 pwm=0.000 | |
| Stats 617245.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6136 bytes_read=35535 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003726 heater_bed: target=0 temp=91.4 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.67 cputime=6670.384 memavail=3612632 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.4 pwm=0.000 | |
| Stats 617246.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6142 bytes_read=35758 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003815 heater_bed: target=0 temp=91.3 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.70 cputime=6670.406 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.0 pwm=0.000 | |
| Stats 617247.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6148 bytes_read=35965 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003802 heater_bed: target=0 temp=91.3 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.70 cputime=6670.426 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000 | |
| Stats 617248.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6154 bytes_read=36173 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003772 heater_bed: target=0 temp=91.2 pwm=0.000 z_thermal_adjust: temp=50.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.70 cputime=6670.447 memavail=3612656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.4 pwm=0.000 | |
| Stats 617249.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6160 bytes_read=36396 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003707 heater_bed: target=0 temp=91.2 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.70 cputime=6670.469 memavail=3612824 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.1 pwm=0.000 | |
| Stats 617250.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6166 bytes_read=36617 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=91.2 pwm=0.000 z_thermal_adjust: temp=50.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.70 cputime=6670.489 memavail=3612748 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.8 pwm=0.000 | |
| Stats 617251.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6172 bytes_read=36825 bytes_retransmit=9 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003654 heater_bed: target=0 temp=91.1 pwm=0.000 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.73 cputime=6670.509 memavail=3612740 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.6 pwm=0.000 | |
| Stats 617252.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6178 bytes_read=37048 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003711 heater_bed: target=0 temp=91.1 pwm=0.000 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.73 cputime=6670.531 memavail=3612604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000 | |
| Stats 617253.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6184 bytes_read=37255 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003726 heater_bed: target=0 temp=91.1 pwm=0.000 z_thermal_adjust: temp=50.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.73 cputime=6670.553 memavail=3612700 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.0 pwm=0.000 | |
| Stats 617254.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6190 bytes_read=37463 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003624 heater_bed: target=0 temp=91.0 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.73 cputime=6670.574 memavail=3612836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.7 pwm=0.000 | |
| Stats 617255.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6196 bytes_read=37700 bytes_retransmit=9 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003597 heater_bed: target=0 temp=91.0 pwm=0.000 z_thermal_adjust: temp=50.4 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.73 cputime=6670.596 memavail=3612820 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.4 pwm=0.000 | |
| Stats 617256.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6202 bytes_read=37907 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003506 heater_bed: target=0 temp=90.9 pwm=0.000 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.75 cputime=6670.617 memavail=3612620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.1 pwm=0.000 | |
| Stats 617257.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6208 bytes_read=38110 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003466 heater_bed: target=0 temp=90.9 pwm=0.000 z_thermal_adjust: temp=50.5 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.75 cputime=6670.639 memavail=3612620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000 | |
| Stats 617258.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6214 bytes_read=38318 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003541 heater_bed: target=0 temp=90.9 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.75 cputime=6670.661 memavail=3612620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.8 pwm=0.000 | |
| Stats 617259.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6220 bytes_read=38523 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003487 heater_bed: target=0 temp=90.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.75 cputime=6670.683 memavail=3612636 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.4 pwm=0.000 | |
| Stats 617260.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6226 bytes_read=38745 bytes_retransmit=9 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003418 heater_bed: target=0 temp=90.8 pwm=0.000 z_thermal_adjust: temp=50.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.75 cputime=6670.704 memavail=3612652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000 | |
| Stats 617261.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6232 bytes_read=38968 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003340 heater_bed: target=0 temp=90.7 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.77 cputime=6670.727 memavail=3612628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000 | |
| Stats 617262.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6238 bytes_read=39175 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003280 heater_bed: target=0 temp=90.7 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.77 cputime=6670.749 memavail=3612644 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.7 pwm=0.000 | |
| Stats 617263.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6244 bytes_read=39383 bytes_retransmit=9 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003212 heater_bed: target=0 temp=90.7 pwm=0.000 z_thermal_adjust: temp=50.7 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.77 cputime=6670.771 memavail=3612780 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.3 pwm=0.000 | |
| Stats 617264.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6250 bytes_read=39606 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003167 heater_bed: target=0 temp=90.6 pwm=0.000 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.77 cputime=6670.793 memavail=3612828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.2 pwm=0.000 | |
| Stats 617265.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6256 bytes_read=39827 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003202 heater_bed: target=0 temp=90.6 pwm=0.000 z_thermal_adjust: temp=50.8 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.77 cputime=6670.816 memavail=3612676 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.9 pwm=0.000 | |
| Stats 617266.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6262 bytes_read=40035 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003139 heater_bed: target=0 temp=90.6 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.79 cputime=6670.837 memavail=3612596 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.6 pwm=0.000 | |
| Stats 617267.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6268 bytes_read=40258 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003184 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=50.9 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.79 cputime=6670.861 memavail=3612692 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.5 pwm=0.000 | |
| Stats 617268.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6274 bytes_read=40465 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003249 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.79 cputime=6670.882 memavail=3612668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000 | |
| Stats 617269.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6280 bytes_read=40673 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003283 heater_bed: target=0 temp=90.5 pwm=0.000 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.79 cputime=6670.900 memavail=3612672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.0 pwm=0.000 | |
| Stats 617270.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6286 bytes_read=40910 bytes_retransmit=9 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003409 heater_bed: target=0 temp=90.4 pwm=0.000 z_thermal_adjust: temp=51.0 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.79 cputime=6670.922 memavail=3612828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.9 pwm=0.000 | |
| Stats 617271.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6292 bytes_read=41117 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003491 heater_bed: target=0 temp=90.4 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.80 cputime=6670.945 memavail=3612740 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.7 pwm=0.000 | |
| Stats 617272.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6298 bytes_read=41325 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.80 cputime=6670.967 memavail=3612788 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.5 pwm=0.000 | |
| Stats 617273.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6304 bytes_read=41548 bytes_retransmit=9 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003599 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.80 cputime=6670.989 memavail=3612724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000 | |
| Stats 617274.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6310 bytes_read=41755 bytes_retransmit=9 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003707 heater_bed: target=0 temp=90.3 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.80 cputime=6671.010 memavail=3612636 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.0 pwm=0.000 | |
| Stats 617275.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6316 bytes_read=41977 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003617 heater_bed: target=0 temp=90.2 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.80 cputime=6671.032 memavail=3612796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000 | |
| Stats 617276.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6322 bytes_read=42214 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003619 heater_bed: target=0 temp=90.2 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.82 cputime=6671.054 memavail=3612716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000 | |
| Stats 617277.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6334 bytes_read=42423 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003697 heater_bed: target=0 temp=90.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.82 cputime=6671.076 memavail=3612692 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.2 pwm=0.000 | |
| Stats 617278.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6340 bytes_read=42631 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003719 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.82 cputime=6671.097 memavail=3612652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.2 pwm=0.000 | |
| Stats 617279.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6346 bytes_read=42868 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.82 cputime=6671.122 memavail=3612772 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000 | |
| Stats 617280.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6352 bytes_read=43075 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=90.1 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.82 cputime=6671.143 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.8 pwm=0.000 | |
| Stats 617281.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6358 bytes_read=43276 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003933 heater_bed: target=0 temp=90.0 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.75 cputime=6671.164 memavail=3612640 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000 | |
| Stats 617282.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6364 bytes_read=43498 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004005 heater_bed: target=0 temp=90.0 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.75 cputime=6671.187 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.3 pwm=0.000 | |
| Stats 617283.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6370 bytes_read=43691 bytes_retransmit=9 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003920 heater_bed: target=0 temp=90.0 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.75 cputime=6671.208 memavail=3612712 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.1 pwm=0.000 | |
| Stats 617284.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6376 bytes_read=43899 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004007 heater_bed: target=0 temp=89.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.75 cputime=6671.229 memavail=3612752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000 | |
| Stats 617285.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6382 bytes_read=44150 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004028 heater_bed: target=0 temp=89.9 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.75 cputime=6671.251 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.7 pwm=0.000 | |
| Stats 617286.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6388 bytes_read=44343 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004113 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.77 cputime=6671.272 memavail=3612716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000 | |
| Stats 617287.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6394 bytes_read=44566 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.77 cputime=6671.294 memavail=3612592 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.7 pwm=0.000 | |
| Stats 617288.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6400 bytes_read=44788 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004166 heater_bed: target=0 temp=89.8 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.77 cputime=6671.315 memavail=3612544 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.2 pwm=0.000 | |
| Stats 617289.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6406 bytes_read=44981 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004081 heater_bed: target=0 temp=89.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.77 cputime=6671.336 memavail=3612712 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.1 pwm=0.000 | |
| Stats 617290.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6412 bytes_read=45218 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004072 heater_bed: target=0 temp=89.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.77 cputime=6671.358 memavail=3612608 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000 | |
| Stats 617291.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6418 bytes_read=45440 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003967 heater_bed: target=0 temp=89.7 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.71 cputime=6671.381 memavail=3612784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.7 pwm=0.000 | |
| Stats 617292.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6424 bytes_read=45633 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003886 heater_bed: target=0 temp=89.6 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.71 cputime=6671.402 memavail=3612788 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.6 pwm=0.000 | |
| Stats 617293.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6430 bytes_read=45856 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003942 heater_bed: target=0 temp=89.6 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.71 cputime=6671.424 memavail=3612780 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.5 pwm=0.000 | |
| Stats 617294.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6436 bytes_read=46078 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003970 heater_bed: target=0 temp=89.6 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.71 cputime=6671.447 memavail=3613020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000 | |
| Stats 617295.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6442 bytes_read=46285 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003904 heater_bed: target=0 temp=89.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.71 cputime=6671.469 memavail=3612644 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.1 pwm=0.000 | |
| Stats 617296.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6448 bytes_read=46508 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003865 heater_bed: target=0 temp=89.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6671.491 memavail=3612836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.9 pwm=0.000 | |
| Stats 617297.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6454 bytes_read=46730 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003957 heater_bed: target=0 temp=89.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6671.513 memavail=3612732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000 | |
| Stats 617298.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6460 bytes_read=46923 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004019 heater_bed: target=0 temp=89.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6671.534 memavail=3612776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.5 pwm=0.000 | |
| Stats 617299.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6466 bytes_read=47161 bytes_retransmit=9 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003966 heater_bed: target=0 temp=89.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6671.557 memavail=3612704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.4 pwm=0.000 | |
| Stats 617300.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6472 bytes_read=47382 bytes_retransmit=9 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003915 heater_bed: target=0 temp=89.3 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.65 cputime=6671.579 memavail=3612796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.2 pwm=0.000 | |
| Stats 617301.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6478 bytes_read=47575 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003855 heater_bed: target=0 temp=89.3 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.68 cputime=6671.600 memavail=3612676 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.2 pwm=0.000 | |
| Stats 617302.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6484 bytes_read=47813 bytes_retransmit=9 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003795 heater_bed: target=0 temp=89.3 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.68 cputime=6671.623 memavail=3612716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.0 pwm=0.000 | |
| Stats 617303.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6490 bytes_read=48020 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003852 heater_bed: target=0 temp=89.2 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.68 cputime=6671.645 memavail=3612804 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.9 pwm=0.000 | |
| Stats 617304.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6496 bytes_read=48213 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003883 heater_bed: target=0 temp=89.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.68 cputime=6671.667 memavail=3612660 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.7 pwm=0.000 | |
| Stats 617305.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6502 bytes_read=48453 bytes_retransmit=9 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003778 heater_bed: target=0 temp=89.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.68 cputime=6671.689 memavail=3612704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000 | |
| Stats 617306.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6508 bytes_read=48650 bytes_retransmit=9 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003722 heater_bed: target=0 temp=89.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.63 cputime=6671.710 memavail=3612720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000 | |
| Stats 617307.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6514 bytes_read=48843 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003705 heater_bed: target=0 temp=89.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.63 cputime=6671.730 memavail=3612752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000 | |
| Stats 617308.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6520 bytes_read=49081 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003642 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.63 cputime=6671.752 memavail=3612928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.2 pwm=0.000 | |
| Stats 617309.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6526 bytes_read=49288 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003582 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.63 cputime=6671.773 memavail=3612856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.8 pwm=0.000 | |
| Stats 617310.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6532 bytes_read=49495 bytes_retransmit=9 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003565 heater_bed: target=0 temp=89.0 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.63 cputime=6671.794 memavail=3612876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.8 pwm=0.000 | |
| Stats 617311.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6538 bytes_read=49733 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003563 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.74 cputime=6671.816 memavail=3612924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000 | |
| Stats 617312.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6544 bytes_read=49940 bytes_retransmit=9 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003557 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.74 cputime=6671.838 memavail=3612996 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.5 pwm=0.000 | |
| Stats 617313.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6550 bytes_read=50133 bytes_retransmit=9 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.74 cputime=6671.858 memavail=3612884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.4 pwm=0.000 | |
| Stats 617314.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6556 bytes_read=50371 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003657 heater_bed: target=0 temp=88.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.74 cputime=6671.879 memavail=3612796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.4 pwm=0.000 | |
| Stats 617315.4: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6562 bytes_read=50592 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003650 heater_bed: target=0 temp=88.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.74 cputime=6671.901 memavail=3612828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000 | |
| Stats 617316.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6568 bytes_read=50785 bytes_retransmit=9 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003697 heater_bed: target=0 temp=88.8 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.76 cputime=6671.922 memavail=3612940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000 | |
| Stats 617317.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6574 bytes_read=51023 bytes_retransmit=9 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003619 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.76 cputime=6671.944 memavail=3612908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000 | |
| Stats 617318.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6580 bytes_read=51230 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003544 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.76 cputime=6671.965 memavail=3612804 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000 | |
| Stats 617319.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6586 bytes_read=51423 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003540 heater_bed: target=0 temp=88.7 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.76 cputime=6671.986 memavail=3612828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000 | |
| Stats 617320.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6592 bytes_read=51675 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003633 heater_bed: target=0 temp=88.6 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.76 cputime=6672.008 memavail=3613020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.7 pwm=0.000 | |
| Stats 617321.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6598 bytes_read=51882 bytes_retransmit=9 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003652 heater_bed: target=0 temp=88.6 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6672.030 memavail=3612804 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000 | |
| Stats 617322.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6604 bytes_read=52075 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003584 heater_bed: target=0 temp=88.6 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6672.050 memavail=3612772 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000 | |
| Stats 617323.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6610 bytes_read=52313 bytes_retransmit=9 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003644 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6672.072 memavail=3612908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000 | |
| Stats 617324.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6616 bytes_read=52520 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003556 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6672.093 memavail=3613004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.0 pwm=0.000 | |
| Stats 617325.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6622 bytes_read=52713 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003491 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.70 cputime=6672.115 memavail=3612944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.9 pwm=0.000 | |
| Stats 617326.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6628 bytes_read=52965 bytes_retransmit=9 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003576 heater_bed: target=0 temp=88.5 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.72 cputime=6672.137 memavail=3612752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.9 pwm=0.000 | |
| Stats 617327.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6634 bytes_read=53172 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003670 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.72 cputime=6672.157 memavail=3613000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000 | |
| Stats 617328.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6640 bytes_read=53365 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003632 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.72 cputime=6672.177 memavail=3612856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000 | |
| Stats 617329.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6646 bytes_read=53591 bytes_retransmit=9 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=88.4 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.72 cputime=6672.198 memavail=3612724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.5 pwm=0.000 | |
| Stats 617330.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6652 bytes_read=53789 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003631 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.72 cputime=6672.220 memavail=3612900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000 | |
| Stats 617331.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6658 bytes_read=53996 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003656 heater_bed: target=0 temp=88.3 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.66 cputime=6672.242 memavail=3612924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000 | |
| Stats 617332.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6664 bytes_read=54234 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.66 cputime=6672.264 memavail=3575576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000 | |
| Stats 617333.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6670 bytes_read=54441 bytes_retransmit=9 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003605 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.66 cputime=6672.289 memavail=3420536 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000 | |
| Stats 617334.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6676 bytes_read=54634 bytes_retransmit=9 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003690 heater_bed: target=0 temp=88.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.66 cputime=6672.311 memavail=3421004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.0 pwm=0.000 | |
| Stats 617335.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6682 bytes_read=54872 bytes_retransmit=9 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=88.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.66 cputime=6672.333 memavail=3421244 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.9 pwm=0.000 | |
| Stats 617336.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6688 bytes_read=55093 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003751 heater_bed: target=0 temp=88.1 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.69 cputime=6672.355 memavail=3470604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000 | |
| Stats 617337.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6694 bytes_read=55286 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003794 heater_bed: target=0 temp=88.1 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.69 cputime=6672.376 memavail=3519436 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.7 pwm=0.000 | |
| Stats 617338.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6706 bytes_read=55540 bytes_retransmit=9 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003859 heater_bed: target=0 temp=88.0 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.69 cputime=6672.400 memavail=3610856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.7 pwm=0.000 | |
| Stats 617339.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6712 bytes_read=55747 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003818 heater_bed: target=0 temp=88.0 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.69 cputime=6672.423 memavail=3612732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000 | |
| Stats 617340.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6718 bytes_read=55940 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=88.0 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.69 cputime=6672.445 memavail=3612776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000 | |
| Stats 617341.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6724 bytes_read=56192 bytes_retransmit=9 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003882 heater_bed: target=0 temp=87.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.72 cputime=6672.466 memavail=3612704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000 | |
| Stats 617342.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6730 bytes_read=56399 bytes_retransmit=9 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003922 heater_bed: target=0 temp=87.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.72 cputime=6672.488 memavail=3613216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000 | |
| Stats 617343.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6736 bytes_read=56592 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003863 heater_bed: target=0 temp=87.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.72 cputime=6672.509 memavail=3609792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000 | |
| Stats 617344.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6742 bytes_read=56830 bytes_retransmit=9 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003896 heater_bed: target=0 temp=87.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.72 cputime=6672.533 memavail=3613116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000 | |
| Stats 617345.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6748 bytes_read=57037 bytes_retransmit=9 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003938 heater_bed: target=0 temp=87.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.72 cputime=6672.555 memavail=3613228 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000 | |
| Stats 617346.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6754 bytes_read=57244 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003882 heater_bed: target=0 temp=87.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.66 cputime=6672.575 memavail=3613196 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000 | |
| Stats 617347.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6760 bytes_read=57482 bytes_retransmit=9 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003838 heater_bed: target=0 temp=87.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.66 cputime=6672.597 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000 | |
| Stats 617348.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6766 bytes_read=57689 bytes_retransmit=9 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003926 heater_bed: target=0 temp=87.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.66 cputime=6672.620 memavail=3613148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.7 pwm=0.000 | |
| Stats 617349.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6772 bytes_read=57882 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003868 heater_bed: target=0 temp=87.7 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.66 cputime=6672.641 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.6 pwm=0.000 | |
| Stats 617350.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6778 bytes_read=58120 bytes_retransmit=9 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003951 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.66 cputime=6672.663 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000 | |
| Stats 617351.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6784 bytes_read=58341 bytes_retransmit=9 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004010 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.69 cputime=6672.686 memavail=3612976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000 | |
| Stats 617352.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6790 bytes_read=58534 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003984 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.69 cputime=6672.706 memavail=3613048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000 | |
| Stats 617353.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6796 bytes_read=58756 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 heater_bed: target=0 temp=87.6 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.69 cputime=6672.729 memavail=3612956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000 | |
| Stats 617354.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6802 bytes_read=58958 bytes_retransmit=9 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003845 heater_bed: target=0 temp=87.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.69 cputime=6672.752 memavail=3612804 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.2 pwm=0.000 | |
| Stats 617355.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6808 bytes_read=59151 bytes_retransmit=9 bytes_invalid=0 send_seq=627 receive_seq=627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003783 heater_bed: target=0 temp=87.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.69 cputime=6672.773 memavail=3612860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.1 pwm=0.000 | |
| Stats 617356.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6814 bytes_read=59403 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003852 heater_bed: target=0 temp=87.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.63 cputime=6672.795 memavail=3612916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000 | |
| Stats 617357.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6820 bytes_read=59610 bytes_retransmit=9 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=87.4 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.63 cputime=6672.817 memavail=3612888 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000 | |
| Stats 617358.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6826 bytes_read=59803 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003870 heater_bed: target=0 temp=87.4 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.63 cputime=6672.839 memavail=3612880 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000 | |
| Stats 617359.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6832 bytes_read=60041 bytes_retransmit=9 bytes_invalid=0 send_seq=631 receive_seq=631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003842 heater_bed: target=0 temp=87.4 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.63 cputime=6672.861 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000 | |
| Stats 617360.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6838 bytes_read=60248 bytes_retransmit=9 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.63 cputime=6672.882 memavail=3612864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000 | |
| Stats 617361.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6844 bytes_read=60470 bytes_retransmit=9 bytes_invalid=0 send_seq=633 receive_seq=633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003700 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.66 cputime=6672.904 memavail=3612864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.7 pwm=0.000 | |
| Stats 617362.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6850 bytes_read=60693 bytes_retransmit=9 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003775 heater_bed: target=0 temp=87.3 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.66 cputime=6672.925 memavail=3612888 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000 | |
| Stats 617363.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6856 bytes_read=60900 bytes_retransmit=9 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003821 heater_bed: target=0 temp=87.2 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.66 cputime=6672.946 memavail=3612852 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000 | |
| Stats 617364.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6862 bytes_read=61108 bytes_retransmit=9 bytes_invalid=0 send_seq=636 receive_seq=636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003724 heater_bed: target=0 temp=87.2 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.66 cputime=6672.967 memavail=3612924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000 | |
| Stats 617365.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6868 bytes_read=61331 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003682 heater_bed: target=0 temp=87.2 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.66 cputime=6672.989 memavail=3612908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000 | |
| Stats 617366.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6874 bytes_read=61552 bytes_retransmit=9 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003772 heater_bed: target=0 temp=87.1 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.61 cputime=6673.012 memavail=3612916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000 | |
| Stats 617367.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6880 bytes_read=61760 bytes_retransmit=9 bytes_invalid=0 send_seq=639 receive_seq=639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003776 heater_bed: target=0 temp=87.1 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.61 cputime=6673.033 memavail=3612868 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.4 pwm=0.000 | |
| Stats 617368.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6886 bytes_read=61983 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003702 heater_bed: target=0 temp=87.1 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.61 cputime=6673.055 memavail=3612956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000 | |
| Stats 617369.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6892 bytes_read=62190 bytes_retransmit=9 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003742 heater_bed: target=0 temp=87.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.61 cputime=6673.077 memavail=3612844 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000 | |
| Stats 617370.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6898 bytes_read=62398 bytes_retransmit=9 bytes_invalid=0 send_seq=642 receive_seq=642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003842 heater_bed: target=0 temp=87.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.61 cputime=6673.098 memavail=3612788 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000 | |
| Stats 617371.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6904 bytes_read=62635 bytes_retransmit=9 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003852 heater_bed: target=0 temp=87.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.64 cputime=6673.118 memavail=3612880 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000 | |
| Stats 617372.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6910 bytes_read=62842 bytes_retransmit=9 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003779 heater_bed: target=0 temp=86.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.64 cputime=6673.139 memavail=3612864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.1 pwm=0.000 | |
| Stats 617373.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6916 bytes_read=63050 bytes_retransmit=9 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003737 heater_bed: target=0 temp=86.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.64 cputime=6673.161 memavail=3612784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000 | |
| Stats 617374.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6922 bytes_read=63273 bytes_retransmit=9 bytes_invalid=0 send_seq=646 receive_seq=646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003689 heater_bed: target=0 temp=86.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.64 cputime=6673.183 memavail=3612784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000 | |
| Stats 617375.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6928 bytes_read=63480 bytes_retransmit=9 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003648 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.64 cputime=6673.205 memavail=3612868 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000 | |
| Stats 617376.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6934 bytes_read=63700 bytes_retransmit=9 bytes_invalid=0 send_seq=648 receive_seq=648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003623 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6673.225 memavail=3612940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000 | |
| Stats 617377.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6940 bytes_read=63908 bytes_retransmit=9 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6673.247 memavail=3612916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000 | |
| Stats 617378.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6946 bytes_read=64110 bytes_retransmit=9 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003625 heater_bed: target=0 temp=86.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6673.268 memavail=3612796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000 | |
| Stats 617379.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6952 bytes_read=64318 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003559 heater_bed: target=0 temp=86.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6673.290 memavail=3612924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000 | |
| Stats 617380.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6958 bytes_read=64541 bytes_retransmit=9 bytes_invalid=0 send_seq=652 receive_seq=652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003614 heater_bed: target=0 temp=86.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6673.313 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000 | |
| Stats 617381.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6964 bytes_read=64762 bytes_retransmit=9 bytes_invalid=0 send_seq=653 receive_seq=653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003648 heater_bed: target=0 temp=86.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.54 cputime=6673.335 memavail=3612576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.4 pwm=0.000 | |
| Stats 617382.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6970 bytes_read=64970 bytes_retransmit=9 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003619 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.54 cputime=6673.356 memavail=3612768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.3 pwm=0.000 | |
| Stats 617383.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6976 bytes_read=65193 bytes_retransmit=9 bytes_invalid=0 send_seq=655 receive_seq=655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003620 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.54 cputime=6673.378 memavail=3612580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000 | |
| Stats 617384.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6982 bytes_read=65400 bytes_retransmit=9 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003678 heater_bed: target=0 temp=86.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.54 cputime=6673.399 memavail=3612692 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000 | |
| Stats 617385.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6988 bytes_read=65608 bytes_retransmit=9 bytes_invalid=0 send_seq=657 receive_seq=657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003694 heater_bed: target=0 temp=86.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.54 cputime=6673.421 memavail=3612788 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000 | |
| Stats 617386.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6994 bytes_read=65845 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003609 heater_bed: target=0 temp=86.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.58 cputime=6673.442 memavail=3612556 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000 | |
| Stats 617387.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7000 bytes_read=66052 bytes_retransmit=9 bytes_invalid=0 send_seq=659 receive_seq=659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003579 heater_bed: target=0 temp=86.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.58 cputime=6673.464 memavail=3612524 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000 | |
| Stats 617388.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7006 bytes_read=66260 bytes_retransmit=9 bytes_invalid=0 send_seq=660 receive_seq=660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003586 heater_bed: target=0 temp=86.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.58 cputime=6673.487 memavail=3612516 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000 | |
| Stats 617389.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7012 bytes_read=66483 bytes_retransmit=9 bytes_invalid=0 send_seq=661 receive_seq=661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003508 heater_bed: target=0 temp=86.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.58 cputime=6673.509 memavail=3612548 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000 | |
| Stats 617390.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7018 bytes_read=66690 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003535 heater_bed: target=0 temp=86.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.58 cputime=6673.530 memavail=3612668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000 | |
| Stats 617391.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7024 bytes_read=66912 bytes_retransmit=9 bytes_invalid=0 send_seq=663 receive_seq=663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003556 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.53 cputime=6673.553 memavail=3612688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000 | |
| Stats 617392.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7030 bytes_read=67135 bytes_retransmit=9 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003671 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.53 cputime=6673.574 memavail=3612752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000 | |
| Stats 617393.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7036 bytes_read=67342 bytes_retransmit=9 bytes_invalid=0 send_seq=665 receive_seq=665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003765 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.53 cputime=6673.596 memavail=3612672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000 | |
| Stats 617394.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7042 bytes_read=67550 bytes_retransmit=9 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003795 heater_bed: target=0 temp=86.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.53 cputime=6673.616 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000 | |
| Stats 617395.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7048 bytes_read=67773 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003750 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.53 cputime=6673.638 memavail=3612668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000 | |
| Stats 617396.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7054 bytes_read=67994 bytes_retransmit=9 bytes_invalid=0 send_seq=668 receive_seq=668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003750 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.49 cputime=6673.660 memavail=3612452 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000 | |
| Stats 617397.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7060 bytes_read=68202 bytes_retransmit=9 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003825 heater_bed: target=0 temp=86.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.49 cputime=6673.682 memavail=3612676 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000 | |
| Stats 617398.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7066 bytes_read=68439 bytes_retransmit=9 bytes_invalid=0 send_seq=670 receive_seq=670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003820 heater_bed: target=0 temp=86.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.49 cputime=6673.705 memavail=3612572 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000 | |
| Stats 617399.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7078 bytes_read=68648 bytes_retransmit=9 bytes_invalid=0 send_seq=672 receive_seq=672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003861 heater_bed: target=0 temp=86.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.49 cputime=6673.727 memavail=3612652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000 | |
| Stats 617400.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7084 bytes_read=68850 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=86.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.49 cputime=6673.749 memavail=3612724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000 | |
| Stats 617401.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7090 bytes_read=69084 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.61 cputime=6673.773 memavail=3612708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000 | |
| Stats 617402.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7096 bytes_read=69277 bytes_retransmit=9 bytes_invalid=0 send_seq=675 receive_seq=675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.61 cputime=6673.794 memavail=3612644 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000 | |
| Stats 617403.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7102 bytes_read=69485 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003839 heater_bed: target=0 temp=86.0 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.61 cputime=6673.816 memavail=3612660 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000 | |
| Stats 617404.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7108 bytes_read=69722 bytes_retransmit=9 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003908 heater_bed: target=0 temp=85.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.61 cputime=6673.839 memavail=3612620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000 | |
| Stats 617405.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7114 bytes_read=69915 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003863 heater_bed: target=0 temp=85.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.61 cputime=6673.860 memavail=3612668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000 | |
| Stats 617406.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7120 bytes_read=70137 bytes_retransmit=9 bytes_invalid=0 send_seq=679 receive_seq=679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003951 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.64 cputime=6673.881 memavail=3612628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000 | |
| Stats 617407.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7126 bytes_read=70374 bytes_retransmit=9 bytes_invalid=0 send_seq=680 receive_seq=680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003918 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.64 cputime=6673.904 memavail=3612624 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000 | |
| Stats 617408.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7132 bytes_read=70567 bytes_retransmit=9 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003868 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.64 cputime=6673.924 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000 | |
| Stats 617409.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7138 bytes_read=70790 bytes_retransmit=9 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=85.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.64 cputime=6673.948 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000 | |
| Stats 617410.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7144 bytes_read=71012 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003913 heater_bed: target=0 temp=85.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.64 cputime=6673.970 memavail=3612744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000 | |
| Stats 617411.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7150 bytes_read=71219 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003993 heater_bed: target=0 temp=85.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6673.992 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000 | |
| Stats 617412.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7156 bytes_read=71442 bytes_retransmit=9 bytes_invalid=0 send_seq=685 receive_seq=685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003904 heater_bed: target=0 temp=85.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6674.015 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000 | |
| Stats 617413.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7162 bytes_read=71664 bytes_retransmit=9 bytes_invalid=0 send_seq=686 receive_seq=686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003852 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6674.037 memavail=3612900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000 | |
| Stats 617414.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7168 bytes_read=71857 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003916 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6674.058 memavail=3612796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000 | |
| Stats 617415.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7174 bytes_read=72080 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003854 heater_bed: target=0 temp=85.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6674.080 memavail=3612708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000 | |
| Stats 617416.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7180 bytes_read=72316 bytes_retransmit=9 bytes_invalid=0 send_seq=689 receive_seq=689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003933 heater_bed: target=0 temp=85.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.70 cputime=6674.103 memavail=3612768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000 | |
| Stats 617417.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7186 bytes_read=72509 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003848 heater_bed: target=0 temp=85.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.70 cputime=6674.124 memavail=3612600 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617418.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7192 bytes_read=72732 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003765 heater_bed: target=0 temp=85.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.70 cputime=6674.147 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000 | |
| Stats 617419.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7198 bytes_read=72954 bytes_retransmit=9 bytes_invalid=0 send_seq=692 receive_seq=692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.70 cputime=6674.169 memavail=3612684 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617420.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7204 bytes_read=73147 bytes_retransmit=9 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003668 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.70 cputime=6674.190 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617421.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7210 bytes_read=73384 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003761 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6674.214 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617422.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7216 bytes_read=73606 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003676 heater_bed: target=0 temp=85.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6674.235 memavail=3612632 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617423.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7222 bytes_read=73799 bytes_retransmit=9 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003699 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6674.256 memavail=3612704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000 | |
| Stats 617424.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7228 bytes_read=74029 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003721 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6674.278 memavail=3612768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000 | |
| Stats 617425.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7234 bytes_read=74223 bytes_retransmit=9 bytes_invalid=0 send_seq=698 receive_seq=698 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003806 heater_bed: target=0 temp=85.3 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6674.299 memavail=3612776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000 | |
| Stats 617426.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7240 bytes_read=74430 bytes_retransmit=9 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003732 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.67 cputime=6674.320 memavail=3612776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000 | |
| Stats 617427.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7246 bytes_read=74668 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003766 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.67 cputime=6674.341 memavail=3612768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000 | |
| Stats 617428.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7252 bytes_read=74875 bytes_retransmit=9 bytes_invalid=0 send_seq=701 receive_seq=701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003738 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.67 cputime=6674.363 memavail=3612648 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 617429.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7258 bytes_read=75068 bytes_retransmit=9 bytes_invalid=0 send_seq=702 receive_seq=702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003801 heater_bed: target=0 temp=85.2 pwm=0.000 z_thermal_adjust: temp=53.4 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.67 cputime=6674.384 memavail=3612544 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000 | |
| Stats 617430.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7264 bytes_read=75306 bytes_retransmit=9 bytes_invalid=0 send_seq=703 receive_seq=703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003730 heater_bed: target=0 temp=85.1 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.67 cputime=6674.405 memavail=3612696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 617431.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7270 bytes_read=75527 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=85.1 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.62 cputime=6674.427 memavail=3612800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 617432.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7276 bytes_read=75720 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003910 heater_bed: target=0 temp=85.1 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.62 cputime=6674.449 memavail=3612792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000 | |
| Stats 617433.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7282 bytes_read=75958 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003876 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.62 cputime=6674.471 memavail=3612784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000 | |
| Stats 617434.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7288 bytes_read=76165 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003796 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.62 cputime=6674.492 memavail=3612584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000 | |
| Stats 617435.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7294 bytes_read=76358 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=85.0 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.62 cputime=6674.512 memavail=3612848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000 | |
| Stats 617436.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7300 bytes_read=76610 bytes_retransmit=9 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003824 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.57 cputime=6674.534 memavail=3612760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000 | |
| Stats 617437.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7306 bytes_read=76817 bytes_retransmit=9 bytes_invalid=0 send_seq=710 receive_seq=710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003780 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.57 cputime=6674.555 memavail=3612772 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000 | |
| Stats 617438.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7312 bytes_read=77010 bytes_retransmit=9 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003768 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.57 cputime=6674.576 memavail=3612668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000 | |
| Stats 617439.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7318 bytes_read=77248 bytes_retransmit=9 bytes_invalid=0 send_seq=712 receive_seq=712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003762 heater_bed: target=0 temp=84.9 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.57 cputime=6674.598 memavail=3612644 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000 | |
| Stats 617440.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7324 bytes_read=77455 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003775 heater_bed: target=0 temp=84.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.57 cputime=6674.618 memavail=3612720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000 | |
| Stats 617441.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7330 bytes_read=77662 bytes_retransmit=9 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003718 heater_bed: target=0 temp=84.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.52 cputime=6674.639 memavail=3612600 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617442.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7336 bytes_read=77900 bytes_retransmit=9 bytes_invalid=0 send_seq=715 receive_seq=715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003811 heater_bed: target=0 temp=84.8 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.52 cputime=6674.661 memavail=3612528 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617443.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7342 bytes_read=78107 bytes_retransmit=9 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.52 cputime=6674.682 memavail=3612720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617444.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7348 bytes_read=78300 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003680 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.52 cputime=6674.703 memavail=3612624 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617445.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7354 bytes_read=78538 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003631 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.52 cputime=6674.726 memavail=3612744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617446.5: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7360 bytes_read=78759 bytes_retransmit=9 bytes_invalid=0 send_seq=719 receive_seq=719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003734 heater_bed: target=0 temp=84.7 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.56 cputime=6674.747 memavail=3612736 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000 | |
| Stats 617447.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7366 bytes_read=78952 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003761 heater_bed: target=0 temp=84.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.56 cputime=6674.767 memavail=3612680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000 | |
| Stats 617448.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7372 bytes_read=79179 bytes_retransmit=9 bytes_invalid=0 send_seq=721 receive_seq=721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003707 heater_bed: target=0 temp=84.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.56 cputime=6674.790 memavail=3612712 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 617449.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7378 bytes_read=79376 bytes_retransmit=9 bytes_invalid=0 send_seq=722 receive_seq=722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003653 heater_bed: target=0 temp=84.6 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.56 cputime=6674.811 memavail=3612592 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 617450.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7384 bytes_read=79569 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003591 heater_bed: target=0 temp=84.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.56 cputime=6674.832 memavail=3612660 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 617451.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7390 bytes_read=79821 bytes_retransmit=9 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003703 heater_bed: target=0 temp=84.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.60 cputime=6674.856 memavail=3612540 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000 | |
| Stats 617452.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7396 bytes_read=80028 bytes_retransmit=9 bytes_invalid=0 send_seq=725 receive_seq=725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003776 heater_bed: target=0 temp=84.5 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.60 cputime=6674.877 memavail=3612620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 617453.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7402 bytes_read=80221 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003846 heater_bed: target=0 temp=84.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.60 cputime=6674.898 memavail=3613024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000 | |
| Stats 617454.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7408 bytes_read=80459 bytes_retransmit=9 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003914 heater_bed: target=0 temp=84.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.60 cputime=6674.920 memavail=3612960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000 | |
| Stats 617455.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7414 bytes_read=80666 bytes_retransmit=9 bytes_invalid=0 send_seq=728 receive_seq=728 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=84.4 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.60 cputime=6674.943 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000 | |
| Stats 617456.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7420 bytes_read=80873 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.55 cputime=6674.963 memavail=3612904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000 | |
| Stats 617457.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7426 bytes_read=81111 bytes_retransmit=9 bytes_invalid=0 send_seq=730 receive_seq=730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.55 cputime=6674.986 memavail=3612856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000 | |
| Stats 617458.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7432 bytes_read=81318 bytes_retransmit=9 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003742 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.55 cputime=6675.008 memavail=3612904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000 | |
| Stats 617459.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7438 bytes_read=81511 bytes_retransmit=9 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003690 heater_bed: target=0 temp=84.3 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.55 cputime=6675.030 memavail=3612904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000 | |
| Stats 617460.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7450 bytes_read=81765 bytes_retransmit=9 bytes_invalid=0 send_seq=734 receive_seq=734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=84.2 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.55 cputime=6675.053 memavail=3613112 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000 | |
| Stats 617461.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7456 bytes_read=81986 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003644 heater_bed: target=0 temp=84.2 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6675.075 memavail=3613288 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617462.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7462 bytes_read=82179 bytes_retransmit=9 bytes_invalid=0 send_seq=736 receive_seq=736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003668 heater_bed: target=0 temp=84.2 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6675.097 memavail=3613172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000 | |
| Stats 617463.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7468 bytes_read=82417 bytes_retransmit=9 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003728 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6675.119 memavail=3613124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000 | |
| Stats 617464.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7474 bytes_read=82624 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003645 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=53.3 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.59 cputime=6675.141 memavail=3608544 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617465.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7480 bytes_read=82817 bytes_retransmit=9 bytes_invalid=0 send_seq=739 receive_seq=739 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003720 heater_bed: target=0 temp=84.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.59 cputime=6675.162 memavail=3613876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617466.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7486 bytes_read=83069 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003781 heater_bed: target=0 temp=84.0 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.62 cputime=6675.183 memavail=3613956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617467.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7492 bytes_read=83276 bytes_retransmit=9 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003797 heater_bed: target=0 temp=84.0 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.62 cputime=6675.204 memavail=3613940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 617468.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7498 bytes_read=83469 bytes_retransmit=9 bytes_invalid=0 send_seq=742 receive_seq=742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003793 heater_bed: target=0 temp=84.0 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.62 cputime=6675.225 memavail=3613940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617469.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7504 bytes_read=83707 bytes_retransmit=9 bytes_invalid=0 send_seq=743 receive_seq=743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003845 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.62 cputime=6675.247 memavail=3614004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617470.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7510 bytes_read=83914 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003888 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.62 cputime=6675.266 memavail=3613900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000 | |
| Stats 617471.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7516 bytes_read=84121 bytes_retransmit=9 bytes_invalid=0 send_seq=745 receive_seq=745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003870 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6675.286 memavail=3613964 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 617472.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7522 bytes_read=84347 bytes_retransmit=9 bytes_invalid=0 send_seq=746 receive_seq=746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003859 heater_bed: target=0 temp=83.9 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.65 cputime=6675.308 memavail=3614028 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000 | |
| Stats 617473.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7528 bytes_read=84544 bytes_retransmit=9 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003900 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.65 cputime=6675.328 memavail=3613924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 617474.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7534 bytes_read=84737 bytes_retransmit=9 bytes_invalid=0 send_seq=748 receive_seq=748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.65 cputime=6675.348 memavail=3613892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000 | |
| Stats 617475.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7540 bytes_read=84975 bytes_retransmit=9 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.65 cputime=6675.372 memavail=3613884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617476.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7546 bytes_read=85196 bytes_retransmit=9 bytes_invalid=0 send_seq=750 receive_seq=750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003934 heater_bed: target=0 temp=83.8 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.68 cputime=6675.393 memavail=3613908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617477.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7552 bytes_read=85389 bytes_retransmit=9 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003901 heater_bed: target=0 temp=83.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.68 cputime=6675.413 memavail=3613972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617478.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7558 bytes_read=85627 bytes_retransmit=9 bytes_invalid=0 send_seq=752 receive_seq=752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003911 heater_bed: target=0 temp=83.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.68 cputime=6675.435 memavail=3614068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000 | |
| Stats 617479.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7564 bytes_read=85834 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003980 heater_bed: target=0 temp=83.7 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.68 cputime=6675.455 memavail=3613944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000 | |
| Stats 617480.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7570 bytes_read=86027 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004039 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.68 cputime=6675.476 memavail=3614092 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617481.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7576 bytes_read=86279 bytes_retransmit=9 bytes_invalid=0 send_seq=755 receive_seq=755 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004109 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.78 cputime=6675.499 memavail=3613980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617482.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7582 bytes_read=86486 bytes_retransmit=9 bytes_invalid=0 send_seq=756 receive_seq=756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004032 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.78 cputime=6675.519 memavail=3613916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617483.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7588 bytes_read=86679 bytes_retransmit=9 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004105 heater_bed: target=0 temp=83.6 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.78 cputime=6675.539 memavail=3613836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 617484.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7594 bytes_read=86917 bytes_retransmit=9 bytes_invalid=0 send_seq=758 receive_seq=758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004094 heater_bed: target=0 temp=83.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.78 cputime=6675.561 memavail=3614068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617485.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7600 bytes_read=87124 bytes_retransmit=9 bytes_invalid=0 send_seq=759 receive_seq=759 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004131 heater_bed: target=0 temp=83.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.78 cputime=6675.581 memavail=3614012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000 | |
| Stats 617486.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7606 bytes_read=87331 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=83.5 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.80 cputime=6675.601 memavail=3613988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000 | |
| Stats 617487.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7612 bytes_read=87569 bytes_retransmit=9 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004117 heater_bed: target=0 temp=83.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.80 cputime=6675.623 memavail=3613980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 617488.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7618 bytes_read=87776 bytes_retransmit=9 bytes_invalid=0 send_seq=762 receive_seq=762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004154 heater_bed: target=0 temp=83.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.80 cputime=6675.645 memavail=3613948 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 617489.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7624 bytes_read=87984 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004185 heater_bed: target=0 temp=83.4 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.80 cputime=6675.666 memavail=3613980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617490.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7630 bytes_read=88207 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004122 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.80 cputime=6675.689 memavail=3613988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000 | |
| Stats 617491.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7636 bytes_read=88428 bytes_retransmit=9 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004092 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.82 cputime=6675.709 memavail=3614012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 617492.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7642 bytes_read=88636 bytes_retransmit=9 bytes_invalid=0 send_seq=766 receive_seq=766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004039 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.6 pwm=0.000 sysload=2.82 cputime=6675.730 memavail=3613924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617493.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7648 bytes_read=88859 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003930 heater_bed: target=0 temp=83.3 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.82 cputime=6675.752 memavail=3614028 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617494.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7654 bytes_read=89066 bytes_retransmit=9 bytes_invalid=0 send_seq=768 receive_seq=768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003905 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.82 cputime=6675.773 memavail=3613900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000 | |
| Stats 617495.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7660 bytes_read=89274 bytes_retransmit=9 bytes_invalid=0 send_seq=769 receive_seq=769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003952 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.82 cputime=6675.794 memavail=3613868 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617496.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7666 bytes_read=89496 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004002 heater_bed: target=0 temp=83.2 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.83 cputime=6675.815 memavail=3613988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617497.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7672 bytes_read=89696 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003909 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.83 cputime=6675.835 memavail=3614052 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617498.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7678 bytes_read=89904 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003903 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.83 cputime=6675.857 memavail=3614068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000 | |
| Stats 617499.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7684 bytes_read=90127 bytes_retransmit=9 bytes_invalid=0 send_seq=773 receive_seq=773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003836 heater_bed: target=0 temp=83.1 pwm=0.000 z_thermal_adjust: temp=53.2 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.83 cputime=6675.880 memavail=3613996 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617500.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7690 bytes_read=90334 bytes_retransmit=9 bytes_invalid=0 send_seq=774 receive_seq=774 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003752 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.83 cputime=6675.901 memavail=3614000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 617501.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7696 bytes_read=90556 bytes_retransmit=9 bytes_invalid=0 send_seq=775 receive_seq=775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.85 cputime=6675.921 memavail=3614000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 617502.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7702 bytes_read=90779 bytes_retransmit=9 bytes_invalid=0 send_seq=776 receive_seq=776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003716 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.85 cputime=6675.942 memavail=3614056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617503.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7708 bytes_read=90986 bytes_retransmit=9 bytes_invalid=0 send_seq=777 receive_seq=777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003686 heater_bed: target=0 temp=83.0 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.85 cputime=6675.963 memavail=3614004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617504.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7714 bytes_read=91194 bytes_retransmit=9 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.85 cputime=6675.985 memavail=3613884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 617505.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7720 bytes_read=91417 bytes_retransmit=9 bytes_invalid=0 send_seq=779 receive_seq=779 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003631 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.85 cputime=6676.006 memavail=3614004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617506.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7726 bytes_read=91638 bytes_retransmit=9 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003581 heater_bed: target=0 temp=82.9 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.027 memavail=3614020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000 | |
| Stats 617507.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7732 bytes_read=91846 bytes_retransmit=9 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003572 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.048 memavail=3614004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617508.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7738 bytes_read=92069 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003596 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.070 memavail=3614212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000 | |
| Stats 617509.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7744 bytes_read=92276 bytes_retransmit=9 bytes_invalid=0 send_seq=783 receive_seq=783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003514 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.090 memavail=3614096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000 | |
| Stats 617510.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7750 bytes_read=92484 bytes_retransmit=9 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003505 heater_bed: target=0 temp=82.8 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.111 memavail=3614000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617511.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7756 bytes_read=92721 bytes_retransmit=9 bytes_invalid=0 send_seq=785 receive_seq=785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003538 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.133 memavail=3614008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617512.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7762 bytes_read=92928 bytes_retransmit=9 bytes_invalid=0 send_seq=786 receive_seq=786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003466 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.153 memavail=3614008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000 | |
| Stats 617513.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7768 bytes_read=93136 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003441 heater_bed: target=0 temp=82.7 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.174 memavail=3614008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617514.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7774 bytes_read=93359 bytes_retransmit=9 bytes_invalid=0 send_seq=788 receive_seq=788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003471 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.195 memavail=3614008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000 | |
| Stats 617515.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7780 bytes_read=93566 bytes_retransmit=9 bytes_invalid=0 send_seq=789 receive_seq=789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003526 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.94 cputime=6676.217 memavail=3614048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617516.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7786 bytes_read=93788 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003450 heater_bed: target=0 temp=82.6 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.238 memavail=3614016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617517.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7792 bytes_read=94011 bytes_retransmit=9 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003462 heater_bed: target=0 temp=82.5 pwm=0.000 z_thermal_adjust: temp=53.1 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.260 memavail=3614160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617518.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7798 bytes_read=94218 bytes_retransmit=9 bytes_invalid=0 send_seq=792 receive_seq=792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003583 heater_bed: target=0 temp=82.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.281 memavail=3613896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617519.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7804 bytes_read=94425 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003578 heater_bed: target=0 temp=82.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.303 memavail=3614016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000 | |
| Stats 617520.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7810 bytes_read=94647 bytes_retransmit=9 bytes_invalid=0 send_seq=794 receive_seq=794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003500 heater_bed: target=0 temp=82.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.325 memavail=3614024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617521.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7822 bytes_read=94865 bytes_retransmit=9 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003536 heater_bed: target=0 temp=82.5 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.347 memavail=3614024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617522.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7828 bytes_read=95073 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003467 heater_bed: target=0 temp=82.4 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.367 memavail=3614120 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000 | |
| Stats 617523.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7834 bytes_read=95310 bytes_retransmit=9 bytes_invalid=0 send_seq=798 receive_seq=798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003502 heater_bed: target=0 temp=82.4 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.391 memavail=3613944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617524.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7840 bytes_read=95503 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003518 heater_bed: target=0 temp=82.4 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.411 memavail=3613960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000 | |
| Stats 617525.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7846 bytes_read=95711 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003601 heater_bed: target=0 temp=82.3 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.95 cputime=6676.432 memavail=3614024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617526.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7852 bytes_read=95962 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003616 heater_bed: target=0 temp=82.3 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.88 cputime=6676.455 memavail=3613920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000 | |
| Stats 617527.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7858 bytes_read=96155 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003727 heater_bed: target=0 temp=82.3 pwm=0.000 z_thermal_adjust: temp=53.0 chamber_heater: target=0 temp=49.5 pwm=0.000 sysload=2.88 cputime=6676.475 memavail=3614024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617528.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7864 bytes_read=96363 bytes_retransmit=9 bytes_invalid=0 send_seq=803 receive_seq=803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003725 heater_bed: target=0 temp=82.2 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.88 cputime=6676.495 memavail=3614080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617529.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7870 bytes_read=96600 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003763 heater_bed: target=0 temp=82.2 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.88 cputime=6676.518 memavail=3614048 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617530.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7876 bytes_read=96793 bytes_retransmit=9 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003750 heater_bed: target=0 temp=82.2 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.88 cputime=6676.538 memavail=3614164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617531.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7882 bytes_read=97015 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=82.2 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.89 cputime=6676.560 memavail=3614176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617532.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7888 bytes_read=97252 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003715 heater_bed: target=0 temp=82.1 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.89 cputime=6676.581 memavail=3613992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617533.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7894 bytes_read=97445 bytes_retransmit=9 bytes_invalid=0 send_seq=808 receive_seq=808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003677 heater_bed: target=0 temp=82.1 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.89 cputime=6676.601 memavail=3614036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617534.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7900 bytes_read=97653 bytes_retransmit=9 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=82.1 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.89 cputime=6676.622 memavail=3613924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617535.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7906 bytes_read=97890 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003861 heater_bed: target=0 temp=82.1 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.89 cputime=6676.647 memavail=3614036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617536.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7912 bytes_read=98097 bytes_retransmit=9 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003770 heater_bed: target=0 temp=82.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.668 memavail=3613860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617537.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7918 bytes_read=98320 bytes_retransmit=9 bytes_invalid=0 send_seq=812 receive_seq=812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003732 heater_bed: target=0 temp=82.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.690 memavail=3614132 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617538.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7924 bytes_read=98542 bytes_retransmit=9 bytes_invalid=0 send_seq=813 receive_seq=813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003814 heater_bed: target=0 temp=82.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.712 memavail=3614036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617539.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7930 bytes_read=98735 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003834 heater_bed: target=0 temp=82.0 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.732 memavail=3613944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617540.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7936 bytes_read=98958 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003797 heater_bed: target=0 temp=81.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.754 memavail=3614040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617541.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7942 bytes_read=99194 bytes_retransmit=9 bytes_invalid=0 send_seq=816 receive_seq=816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=81.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.775 memavail=3614040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617542.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7948 bytes_read=99387 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003777 heater_bed: target=0 temp=81.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.795 memavail=3613928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617543.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7954 bytes_read=99605 bytes_retransmit=9 bytes_invalid=0 send_seq=818 receive_seq=818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003757 heater_bed: target=0 temp=81.9 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.816 memavail=3613920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 617544.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7960 bytes_read=99812 bytes_retransmit=9 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=81.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.838 memavail=3614244 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617545.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7966 bytes_read=100004 bytes_retransmit=9 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003604 heater_bed: target=0 temp=81.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.90 cputime=6676.858 memavail=3614112 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 617546.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7972 bytes_read=100241 bytes_retransmit=9 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003705 heater_bed: target=0 temp=81.8 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.99 cputime=6676.880 memavail=3613920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000 | |
| Stats 617547.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7978 bytes_read=100463 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003765 heater_bed: target=0 temp=81.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.99 cputime=6676.902 memavail=3613808 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 617548.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7984 bytes_read=100656 bytes_retransmit=9 bytes_invalid=0 send_seq=823 receive_seq=823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=81.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.4 pwm=0.000 sysload=2.99 cputime=6676.922 memavail=3613984 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617549.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7990 bytes_read=100894 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003884 heater_bed: target=0 temp=81.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.99 cputime=6676.944 memavail=3614176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617550.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7996 bytes_read=101101 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003881 heater_bed: target=0 temp=81.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.99 cputime=6676.966 memavail=3614000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617551.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8002 bytes_read=101308 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003858 heater_bed: target=0 temp=81.7 pwm=0.000 z_thermal_adjust: temp=52.9 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.91 cputime=6676.986 memavail=3614056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617552.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8008 bytes_read=101546 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003901 heater_bed: target=0 temp=81.6 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.91 cputime=6677.007 memavail=3613992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617553.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8014 bytes_read=101753 bytes_retransmit=9 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003906 heater_bed: target=0 temp=81.6 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.91 cputime=6677.029 memavail=3614008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617554.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8020 bytes_read=101946 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003900 heater_bed: target=0 temp=81.6 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.91 cputime=6677.050 memavail=3613992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617555.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8026 bytes_read=102184 bytes_retransmit=9 bytes_invalid=0 send_seq=830 receive_seq=830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003905 heater_bed: target=0 temp=81.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.91 cputime=6677.071 memavail=3614056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000 | |
| Stats 617556.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8032 bytes_read=102405 bytes_retransmit=9 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003994 heater_bed: target=0 temp=81.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.84 cputime=6677.092 memavail=3614152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617557.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8038 bytes_read=102598 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003917 heater_bed: target=0 temp=81.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.84 cputime=6677.112 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000 | |
| Stats 617558.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8044 bytes_read=102836 bytes_retransmit=9 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003859 heater_bed: target=0 temp=81.5 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.84 cputime=6677.133 memavail=3614056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617559.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8050 bytes_read=103043 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003909 heater_bed: target=0 temp=81.4 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.84 cputime=6677.155 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617560.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8056 bytes_read=103236 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003971 heater_bed: target=0 temp=81.4 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.84 cputime=6677.175 memavail=3614096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617561.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8062 bytes_read=103488 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004056 heater_bed: target=0 temp=81.4 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6677.196 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000 | |
| Stats 617562.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8068 bytes_read=103695 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004144 heater_bed: target=0 temp=81.3 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6677.217 memavail=3613992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617563.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8074 bytes_read=103888 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004131 heater_bed: target=0 temp=81.3 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6677.238 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617564.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8080 bytes_read=104126 bytes_retransmit=9 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004184 heater_bed: target=0 temp=81.3 pwm=0.000 z_thermal_adjust: temp=52.8 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6677.260 memavail=3614184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617565.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8086 bytes_read=104333 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=81.3 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.77 cputime=6677.281 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617566.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8092 bytes_read=104540 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004140 heater_bed: target=0 temp=81.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.79 cputime=6677.302 memavail=3614000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000 | |
| Stats 617567.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8098 bytes_read=104771 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004184 heater_bed: target=0 temp=81.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.79 cputime=6677.324 memavail=3614176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617568.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8104 bytes_read=104964 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004214 heater_bed: target=0 temp=81.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.79 cputime=6677.345 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617569.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8110 bytes_read=105156 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004135 heater_bed: target=0 temp=81.2 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.79 cputime=6677.365 memavail=3614064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617570.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8116 bytes_read=105394 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004090 heater_bed: target=0 temp=81.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.79 cputime=6677.388 memavail=3614072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617571.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8122 bytes_read=105615 bytes_retransmit=9 bytes_invalid=0 send_seq=846 receive_seq=846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003986 heater_bed: target=0 temp=81.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.81 cputime=6677.410 memavail=3614192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000 | |
| Stats 617572.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8128 bytes_read=105808 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003985 heater_bed: target=0 temp=81.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.3 pwm=0.000 sysload=2.81 cputime=6677.430 memavail=3614016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617573.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8134 bytes_read=106046 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004070 heater_bed: target=0 temp=81.1 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.81 cputime=6677.450 memavail=3614072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000 | |
| Stats 617574.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8140 bytes_read=106253 bytes_retransmit=9 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004119 heater_bed: target=0 temp=81.0 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.81 cputime=6677.473 memavail=3614080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617575.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8146 bytes_read=106446 bytes_retransmit=9 bytes_invalid=0 send_seq=850 receive_seq=850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004193 heater_bed: target=0 temp=81.0 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.81 cputime=6677.493 memavail=3614080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617576.6: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8152 bytes_read=106698 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004257 heater_bed: target=0 temp=81.0 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.74 cputime=6677.515 memavail=3614120 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617577.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8158 bytes_read=106905 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004218 heater_bed: target=0 temp=81.0 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.74 cputime=6677.536 memavail=3614080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617578.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8164 bytes_read=107098 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004180 heater_bed: target=0 temp=80.9 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.74 cputime=6677.556 memavail=3614080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617579.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8170 bytes_read=107336 bytes_retransmit=9 bytes_invalid=0 send_seq=854 receive_seq=854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004097 heater_bed: target=0 temp=80.9 pwm=0.000 z_thermal_adjust: temp=52.7 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.74 cputime=6677.578 memavail=3614160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617580.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8176 bytes_read=107543 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004137 heater_bed: target=0 temp=80.9 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.74 cputime=6677.599 memavail=3614168 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000 | |
| Stats 617581.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8182 bytes_read=107736 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=80.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.84 cputime=6677.619 memavail=3614088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617582.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8194 bytes_read=108004 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004080 heater_bed: target=0 temp=80.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.84 cputime=6677.642 memavail=3613968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617583.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8200 bytes_read=108211 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004152 heater_bed: target=0 temp=80.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.84 cputime=6677.664 memavail=3614088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617584.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8206 bytes_read=108404 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=80.8 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.84 cputime=6677.686 memavail=3614112 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617585.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8212 bytes_read=108642 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003966 heater_bed: target=0 temp=80.7 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.84 cputime=6677.709 memavail=3613132 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617586.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8218 bytes_read=108849 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003926 heater_bed: target=0 temp=80.7 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.86 cputime=6677.730 memavail=3613204 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617587.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8224 bytes_read=109056 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003905 heater_bed: target=0 temp=80.7 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.86 cputime=6677.751 memavail=3613180 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617588.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8230 bytes_read=109294 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003958 heater_bed: target=0 temp=80.7 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.86 cputime=6677.774 memavail=3613180 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617589.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8236 bytes_read=109501 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003854 heater_bed: target=0 temp=80.6 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.86 cputime=6677.795 memavail=3613116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617590.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8242 bytes_read=109694 bytes_retransmit=9 bytes_invalid=0 send_seq=866 receive_seq=866 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003767 heater_bed: target=0 temp=80.6 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.86 cputime=6677.816 memavail=3613204 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617591.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8248 bytes_read=109922 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003770 heater_bed: target=0 temp=80.6 pwm=0.000 z_thermal_adjust: temp=52.6 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.87 cputime=6677.838 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617592.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8254 bytes_read=110131 bytes_retransmit=9 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003701 heater_bed: target=0 temp=80.6 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.87 cputime=6677.859 memavail=3613184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617593.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8260 bytes_read=110324 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003674 heater_bed: target=0 temp=80.5 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.87 cputime=6677.880 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000 | |
| Stats 617594.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8266 bytes_read=110562 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003590 heater_bed: target=0 temp=80.5 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.87 cputime=6677.903 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617595.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8272 bytes_read=110769 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003551 heater_bed: target=0 temp=80.5 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.87 cputime=6677.924 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617596.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8278 bytes_read=110962 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003628 heater_bed: target=0 temp=80.5 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.88 cputime=6677.945 memavail=3613100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617597.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8284 bytes_read=111214 bytes_retransmit=9 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003729 heater_bed: target=0 temp=80.4 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.88 cputime=6677.968 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617598.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8290 bytes_read=111421 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003747 heater_bed: target=0 temp=80.4 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.88 cputime=6677.990 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617599.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8296 bytes_read=111614 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003695 heater_bed: target=0 temp=80.4 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.88 cputime=6678.010 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617600.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8302 bytes_read=111852 bytes_retransmit=9 bytes_invalid=0 send_seq=876 receive_seq=876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003638 heater_bed: target=0 temp=80.4 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.88 cputime=6678.031 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617601.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8308 bytes_read=112059 bytes_retransmit=9 bytes_invalid=0 send_seq=877 receive_seq=877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003636 heater_bed: target=0 temp=80.3 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.89 cputime=6678.052 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617602.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8314 bytes_read=112266 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003620 heater_bed: target=0 temp=80.3 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.2 pwm=0.000 sysload=2.89 cputime=6678.072 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617603.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8320 bytes_read=112504 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003559 heater_bed: target=0 temp=80.3 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.89 cputime=6678.094 memavail=3613100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000 | |
| Stats 617604.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8326 bytes_read=112711 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003508 heater_bed: target=0 temp=80.2 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.89 cputime=6678.116 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617605.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8332 bytes_read=112904 bytes_retransmit=9 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003630 heater_bed: target=0 temp=80.2 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.89 cputime=6678.136 memavail=3613196 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617606.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8338 bytes_read=113142 bytes_retransmit=9 bytes_invalid=0 send_seq=882 receive_seq=882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003725 heater_bed: target=0 temp=80.2 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.158 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617607.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8344 bytes_read=113363 bytes_retransmit=9 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003769 heater_bed: target=0 temp=80.2 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.180 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617608.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8350 bytes_read=113556 bytes_retransmit=9 bytes_invalid=0 send_seq=884 receive_seq=884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003716 heater_bed: target=0 temp=80.1 pwm=0.000 z_thermal_adjust: temp=52.5 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.200 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617609.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8356 bytes_read=113794 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003634 heater_bed: target=0 temp=80.1 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.221 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617610.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8362 bytes_read=114001 bytes_retransmit=9 bytes_invalid=0 send_seq=886 receive_seq=886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003587 heater_bed: target=0 temp=80.1 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.244 memavail=3613200 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617611.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8368 bytes_read=114194 bytes_retransmit=9 bytes_invalid=0 send_seq=887 receive_seq=887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003635 heater_bed: target=0 temp=80.1 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.264 memavail=3613200 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617612.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8374 bytes_read=114446 bytes_retransmit=9 bytes_invalid=0 send_seq=888 receive_seq=888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003615 heater_bed: target=0 temp=80.0 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.286 memavail=3613136 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617613.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8380 bytes_read=114653 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 heater_bed: target=0 temp=80.0 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.307 memavail=3613256 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617614.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8386 bytes_read=114861 bytes_retransmit=9 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003578 heater_bed: target=0 temp=80.0 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.327 memavail=3613176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617615.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8392 bytes_read=115073 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003685 heater_bed: target=0 temp=79.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.349 memavail=3613208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617616.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8398 bytes_read=115270 bytes_retransmit=9 bytes_invalid=0 send_seq=892 receive_seq=892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003610 heater_bed: target=0 temp=79.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.371 memavail=3613208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617617.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8404 bytes_read=115492 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003721 heater_bed: target=0 temp=79.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.393 memavail=3613208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617618.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8410 bytes_read=115715 bytes_retransmit=9 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003813 heater_bed: target=0 temp=79.9 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.414 memavail=3613240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617619.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8416 bytes_read=115922 bytes_retransmit=9 bytes_invalid=0 send_seq=895 receive_seq=895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003725 heater_bed: target=0 temp=79.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.98 cputime=6678.436 memavail=3613208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617620.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8422 bytes_read=116130 bytes_retransmit=9 bytes_invalid=0 send_seq=896 receive_seq=896 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003738 heater_bed: target=0 temp=79.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.456 memavail=3613212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617621.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8428 bytes_read=116353 bytes_retransmit=9 bytes_invalid=0 send_seq=897 receive_seq=897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003783 heater_bed: target=0 temp=79.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.477 memavail=3613212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617622.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8434 bytes_read=116574 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003805 heater_bed: target=0 temp=79.8 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.98 cputime=6678.497 memavail=3613088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617623.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8440 bytes_read=116782 bytes_retransmit=9 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003813 heater_bed: target=0 temp=79.7 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.1 pwm=0.000 sysload=2.98 cputime=6678.519 memavail=3613216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617624.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8446 bytes_read=117005 bytes_retransmit=9 bytes_invalid=0 send_seq=900 receive_seq=900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003806 heater_bed: target=0 temp=79.7 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.98 cputime=6678.540 memavail=3613344 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000 | |
| Stats 617625.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8452 bytes_read=117212 bytes_retransmit=9 bytes_invalid=0 send_seq=901 receive_seq=901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003742 heater_bed: target=0 temp=79.7 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.98 cputime=6678.560 memavail=3613216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617626.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8458 bytes_read=117420 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003701 heater_bed: target=0 temp=79.7 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.580 memavail=3613120 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617627.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8464 bytes_read=117657 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003768 heater_bed: target=0 temp=79.6 pwm=0.000 z_thermal_adjust: temp=52.4 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.602 memavail=3613124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617628.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8470 bytes_read=117864 bytes_retransmit=9 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003785 heater_bed: target=0 temp=79.6 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.623 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617629.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8476 bytes_read=118072 bytes_retransmit=9 bytes_invalid=0 send_seq=905 receive_seq=905 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003763 heater_bed: target=0 temp=79.6 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.645 memavail=3613220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617630.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8482 bytes_read=118295 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003714 heater_bed: target=0 temp=79.6 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.667 memavail=3613096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000 | |
| Stats 617631.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8488 bytes_read=118502 bytes_retransmit=9 bytes_invalid=0 send_seq=907 receive_seq=907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003773 heater_bed: target=0 temp=79.5 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.689 memavail=3613188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617632.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8494 bytes_read=118724 bytes_retransmit=9 bytes_invalid=0 send_seq=908 receive_seq=908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003813 heater_bed: target=0 temp=79.5 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.710 memavail=3613228 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617633.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8500 bytes_read=118947 bytes_retransmit=9 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003867 heater_bed: target=0 temp=79.5 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.731 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617634.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8506 bytes_read=119154 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003799 heater_bed: target=0 temp=79.5 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.752 memavail=3613148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617635.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8512 bytes_read=119362 bytes_retransmit=9 bytes_invalid=0 send_seq=911 receive_seq=911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003843 heater_bed: target=0 temp=79.4 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.99 cputime=6678.774 memavail=3613232 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617636.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8518 bytes_read=119585 bytes_retransmit=9 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003889 heater_bed: target=0 temp=79.4 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.91 cputime=6678.796 memavail=3613288 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617637.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8524 bytes_read=119806 bytes_retransmit=9 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003879 heater_bed: target=0 temp=79.4 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.91 cputime=6678.817 memavail=3613268 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617638.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8530 bytes_read=120014 bytes_retransmit=9 bytes_invalid=0 send_seq=914 receive_seq=914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003885 heater_bed: target=0 temp=79.4 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.91 cputime=6678.838 memavail=3613236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617639.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8536 bytes_read=120225 bytes_retransmit=9 bytes_invalid=0 send_seq=915 receive_seq=915 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003951 heater_bed: target=0 temp=79.3 pwm=0.000 z_thermal_adjust: temp=52.3 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.91 cputime=6678.861 memavail=3613204 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617640.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8542 bytes_read=120423 bytes_retransmit=9 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003998 heater_bed: target=0 temp=79.3 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.91 cputime=6678.883 memavail=3613240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617641.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8548 bytes_read=120631 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004084 heater_bed: target=0 temp=79.3 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.83 cputime=6678.904 memavail=3613368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617642.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8554 bytes_read=120868 bytes_retransmit=9 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=79.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.83 cputime=6678.927 memavail=3613240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617643.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8560 bytes_read=121075 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003999 heater_bed: target=0 temp=79.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.83 cputime=6678.948 memavail=3613120 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617644.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8572 bytes_read=121299 bytes_retransmit=9 bytes_invalid=0 send_seq=921 receive_seq=921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=79.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.83 cputime=6678.970 memavail=3613240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617645.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8578 bytes_read=121522 bytes_retransmit=9 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003809 heater_bed: target=0 temp=79.2 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.83 cputime=6678.991 memavail=3613240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617646.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8584 bytes_read=121729 bytes_retransmit=9 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003784 heater_bed: target=0 temp=79.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.85 cputime=6679.012 memavail=3613248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617647.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8590 bytes_read=121951 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003883 heater_bed: target=0 temp=79.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.85 cputime=6679.033 memavail=3613248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617648.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8596 bytes_read=122174 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003863 heater_bed: target=0 temp=79.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.85 cputime=6679.054 memavail=3613248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617649.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8602 bytes_read=122381 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003827 heater_bed: target=0 temp=79.1 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.85 cputime=6679.075 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617650.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8608 bytes_read=122589 bytes_retransmit=9 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003754 heater_bed: target=0 temp=79.0 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.85 cputime=6679.097 memavail=3613376 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617651.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8614 bytes_read=122812 bytes_retransmit=9 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003704 heater_bed: target=0 temp=79.0 pwm=0.000 z_thermal_adjust: temp=52.2 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.78 cputime=6679.118 memavail=3613184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617652.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8620 bytes_read=123033 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003678 heater_bed: target=0 temp=79.0 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.78 cputime=6679.140 memavail=3613212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617653.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8626 bytes_read=123241 bytes_retransmit=9 bytes_invalid=0 send_seq=930 receive_seq=930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003771 heater_bed: target=0 temp=78.9 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.78 cputime=6679.161 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000 | |
| Stats 617654.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8632 bytes_read=123464 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003806 heater_bed: target=0 temp=78.9 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.78 cputime=6679.184 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617655.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8638 bytes_read=123671 bytes_retransmit=9 bytes_invalid=0 send_seq=932 receive_seq=932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003795 heater_bed: target=0 temp=78.9 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.78 cputime=6679.205 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617656.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8644 bytes_read=123879 bytes_retransmit=9 bytes_invalid=0 send_seq=933 receive_seq=933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003776 heater_bed: target=0 temp=78.9 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.72 cputime=6679.226 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617657.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8650 bytes_read=124130 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003727 heater_bed: target=0 temp=78.9 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.72 cputime=6679.247 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000 | |
| Stats 617658.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8656 bytes_read=124323 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003693 heater_bed: target=0 temp=78.8 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.72 cputime=6679.268 memavail=3613336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617659.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8662 bytes_read=124531 bytes_retransmit=9 bytes_invalid=0 send_seq=936 receive_seq=936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003795 heater_bed: target=0 temp=78.8 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.72 cputime=6679.289 memavail=3613256 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000 | |
| Stats 617660.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8668 bytes_read=124768 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003793 heater_bed: target=0 temp=78.8 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.72 cputime=6679.312 memavail=3613200 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617661.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8674 bytes_read=124961 bytes_retransmit=9 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003710 heater_bed: target=0 temp=78.8 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.66 cputime=6679.332 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000 | |
| Stats 617662.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8680 bytes_read=125182 bytes_retransmit=9 bytes_invalid=0 send_seq=939 receive_seq=939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003749 heater_bed: target=0 temp=78.7 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.66 cputime=6679.354 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617663.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8686 bytes_read=125403 bytes_retransmit=9 bytes_invalid=0 send_seq=940 receive_seq=940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003694 heater_bed: target=0 temp=78.7 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=49.0 pwm=0.000 sysload=2.66 cputime=6679.376 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617664.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8692 bytes_read=125591 bytes_retransmit=9 bytes_invalid=0 send_seq=941 receive_seq=941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003681 heater_bed: target=0 temp=78.7 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.66 cputime=6679.397 memavail=3613284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617665.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8698 bytes_read=125799 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003640 heater_bed: target=0 temp=78.6 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.66 cputime=6679.418 memavail=3613124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617666.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8704 bytes_read=126036 bytes_retransmit=9 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003632 heater_bed: target=0 temp=78.6 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.61 cputime=6679.439 memavail=3613268 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617667.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8710 bytes_read=126243 bytes_retransmit=9 bytes_invalid=0 send_seq=944 receive_seq=944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003621 heater_bed: target=0 temp=78.6 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.61 cputime=6679.460 memavail=3613268 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000 | |
| Stats 617668.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8716 bytes_read=126451 bytes_retransmit=9 bytes_invalid=0 send_seq=945 receive_seq=945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003554 heater_bed: target=0 temp=78.6 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.61 cputime=6679.482 memavail=3613236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617669.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8722 bytes_read=126688 bytes_retransmit=9 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003579 heater_bed: target=0 temp=78.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.61 cputime=6679.503 memavail=3613268 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617670.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8728 bytes_read=126881 bytes_retransmit=9 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003633 heater_bed: target=0 temp=78.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.61 cputime=6679.525 memavail=3613084 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617671.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8734 bytes_read=127089 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003612 heater_bed: target=0 temp=78.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.56 cputime=6679.546 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617672.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8740 bytes_read=127340 bytes_retransmit=9 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003680 heater_bed: target=0 temp=78.5 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.56 cputime=6679.568 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617673.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8746 bytes_read=127533 bytes_retransmit=9 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003751 heater_bed: target=0 temp=78.4 pwm=0.000 z_thermal_adjust: temp=52.1 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.56 cputime=6679.586 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617674.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8752 bytes_read=127756 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003864 heater_bed: target=0 temp=78.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.56 cputime=6679.607 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000 | |
| Stats 617675.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8758 bytes_read=127978 bytes_retransmit=9 bytes_invalid=0 send_seq=952 receive_seq=952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003962 heater_bed: target=0 temp=78.4 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.56 cputime=6679.629 memavail=3613200 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000 | |
| Stats 617676.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8764 bytes_read=128171 bytes_retransmit=9 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003990 heater_bed: target=0 temp=78.3 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.59 cputime=6679.649 memavail=3613280 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617677.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8770 bytes_read=128408 bytes_retransmit=9 bytes_invalid=0 send_seq=954 receive_seq=954 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003902 heater_bed: target=0 temp=78.3 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.59 cputime=6679.671 memavail=3613308 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617678.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8776 bytes_read=128630 bytes_retransmit=9 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003835 heater_bed: target=0 temp=78.3 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.59 cputime=6679.694 memavail=3613208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617679.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8782 bytes_read=128823 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003765 heater_bed: target=0 temp=78.3 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.59 cputime=6679.714 memavail=3613280 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617680.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8788 bytes_read=129046 bytes_retransmit=9 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003755 heater_bed: target=0 temp=78.2 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.9 pwm=0.000 sysload=2.59 cputime=6679.736 memavail=3613284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617681.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8794 bytes_read=129268 bytes_retransmit=9 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003807 heater_bed: target=0 temp=78.2 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.55 cputime=6679.757 memavail=3613388 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617682.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8800 bytes_read=129475 bytes_retransmit=9 bytes_invalid=0 send_seq=959 receive_seq=959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=78.2 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.55 cputime=6679.778 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617683.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8806 bytes_read=129713 bytes_retransmit=9 bytes_invalid=0 send_seq=960 receive_seq=960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003789 heater_bed: target=0 temp=78.2 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.55 cputime=6679.799 memavail=3613304 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617684.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8812 bytes_read=129920 bytes_retransmit=9 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003893 heater_bed: target=0 temp=78.2 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.55 cputime=6679.821 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617685.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8818 bytes_read=130113 bytes_retransmit=9 bytes_invalid=0 send_seq=962 receive_seq=962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003977 heater_bed: target=0 temp=78.1 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.55 cputime=6679.842 memavail=3613184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617686.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8824 bytes_read=130347 bytes_retransmit=9 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004024 heater_bed: target=0 temp=78.1 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.50 cputime=6679.863 memavail=3613128 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617687.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8830 bytes_read=130554 bytes_retransmit=9 bytes_invalid=0 send_seq=964 receive_seq=964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004051 heater_bed: target=0 temp=78.1 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.50 cputime=6679.884 memavail=3613352 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617688.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8836 bytes_read=130743 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004101 heater_bed: target=0 temp=78.1 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.50 cputime=6679.905 memavail=3613524 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000 | |
| Stats 617689.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8842 bytes_read=130981 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004163 heater_bed: target=0 temp=78.0 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.50 cputime=6679.927 memavail=3613656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617690.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8848 bytes_read=131188 bytes_retransmit=9 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004174 heater_bed: target=0 temp=78.0 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.50 cputime=6679.947 memavail=3613560 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617691.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8854 bytes_read=131381 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004193 heater_bed: target=0 temp=78.0 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.62 cputime=6679.968 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617692.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8860 bytes_read=131633 bytes_retransmit=9 bytes_invalid=0 send_seq=969 receive_seq=969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004173 heater_bed: target=0 temp=78.0 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.62 cputime=6679.989 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617693.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8866 bytes_read=131840 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004241 heater_bed: target=0 temp=77.9 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.62 cputime=6680.011 memavail=3613488 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617694.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8872 bytes_read=132033 bytes_retransmit=9 bytes_invalid=0 send_seq=971 receive_seq=971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004233 heater_bed: target=0 temp=77.9 pwm=0.000 z_thermal_adjust: temp=52.0 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.62 cputime=6680.031 memavail=3613656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617695.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8878 bytes_read=132271 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004186 heater_bed: target=0 temp=77.9 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.62 cputime=6680.053 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617696.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8884 bytes_read=132478 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004118 heater_bed: target=0 temp=77.9 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.57 cputime=6680.074 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617697.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8890 bytes_read=132685 bytes_retransmit=9 bytes_invalid=0 send_seq=974 receive_seq=974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004012 heater_bed: target=0 temp=77.8 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.57 cputime=6680.094 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617698.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8896 bytes_read=132923 bytes_retransmit=9 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004049 heater_bed: target=0 temp=77.8 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.57 cputime=6680.116 memavail=3613512 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617699.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8902 bytes_read=133130 bytes_retransmit=9 bytes_invalid=0 send_seq=976 receive_seq=976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004077 heater_bed: target=0 temp=77.8 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.57 cputime=6680.136 memavail=3613520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617700.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8908 bytes_read=133323 bytes_retransmit=9 bytes_invalid=0 send_seq=977 receive_seq=977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004043 heater_bed: target=0 temp=77.8 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.57 cputime=6680.156 memavail=3613276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617701.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8914 bytes_read=133561 bytes_retransmit=9 bytes_invalid=0 send_seq=978 receive_seq=978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004121 heater_bed: target=0 temp=77.7 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.61 cputime=6680.178 memavail=3613276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617702.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8920 bytes_read=133782 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004170 heater_bed: target=0 temp=77.7 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.61 cputime=6680.200 memavail=3613276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617703.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8926 bytes_read=133975 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004187 heater_bed: target=0 temp=77.7 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.61 cputime=6680.220 memavail=3613420 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617704.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8932 bytes_read=134213 bytes_retransmit=9 bytes_invalid=0 send_seq=981 receive_seq=981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004102 heater_bed: target=0 temp=77.7 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.61 cputime=6680.241 memavail=3613276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617705.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8944 bytes_read=134436 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004076 heater_bed: target=0 temp=77.6 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.61 cputime=6680.263 memavail=3610488 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617706.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8950 bytes_read=134629 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003987 heater_bed: target=0 temp=77.6 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.64 cputime=6680.283 memavail=3613028 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617707.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8956 bytes_read=134881 bytes_retransmit=9 bytes_invalid=0 send_seq=985 receive_seq=985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003963 heater_bed: target=0 temp=77.6 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.64 cputime=6680.306 memavail=3612956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617708.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8962 bytes_read=135088 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003918 heater_bed: target=0 temp=77.6 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.64 cputime=6680.326 memavail=3612932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617709.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8968 bytes_read=135281 bytes_retransmit=9 bytes_invalid=0 send_seq=987 receive_seq=987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003915 heater_bed: target=0 temp=77.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.64 cputime=6680.347 memavail=3612932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617710.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8974 bytes_read=135510 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003897 heater_bed: target=0 temp=77.5 pwm=0.000 z_thermal_adjust: temp=51.9 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.64 cputime=6680.369 memavail=3612932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000 | |
| Stats 617711.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8980 bytes_read=135703 bytes_retransmit=9 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003931 heater_bed: target=0 temp=77.5 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.8 pwm=0.000 sysload=2.59 cputime=6680.390 memavail=3612908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617712.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8986 bytes_read=135910 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003836 heater_bed: target=0 temp=77.5 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.59 cputime=6680.411 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617713.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8992 bytes_read=136148 bytes_retransmit=9 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 heater_bed: target=0 temp=77.4 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.59 cputime=6680.434 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617714.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8998 bytes_read=136355 bytes_retransmit=9 bytes_invalid=0 send_seq=992 receive_seq=992 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003846 heater_bed: target=0 temp=77.4 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.59 cputime=6680.454 memavail=3613000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617715.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9004 bytes_read=136548 bytes_retransmit=9 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003888 heater_bed: target=0 temp=77.4 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.59 cputime=6680.473 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617716.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9010 bytes_read=136786 bytes_retransmit=9 bytes_invalid=0 send_seq=994 receive_seq=994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003863 heater_bed: target=0 temp=77.3 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.54 cputime=6680.496 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617717.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9016 bytes_read=137007 bytes_retransmit=9 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003792 heater_bed: target=0 temp=77.4 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.54 cputime=6680.518 memavail=3612936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617718.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9022 bytes_read=137200 bytes_retransmit=9 bytes_invalid=0 send_seq=996 receive_seq=996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003844 heater_bed: target=0 temp=77.3 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.54 cputime=6680.538 memavail=3612892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617719.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9028 bytes_read=137438 bytes_retransmit=9 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 heater_bed: target=0 temp=77.3 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.54 cputime=6680.560 memavail=3612944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617720.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9034 bytes_read=137645 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003902 heater_bed: target=0 temp=77.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.54 cputime=6680.581 memavail=3612772 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617721.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9040 bytes_read=137838 bytes_retransmit=9 bytes_invalid=0 send_seq=999 receive_seq=999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003810 heater_bed: target=0 temp=77.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.58 cputime=6680.603 memavail=3612948 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617722.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9046 bytes_read=138090 bytes_retransmit=9 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003886 heater_bed: target=0 temp=77.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.58 cputime=6680.625 memavail=3612884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617723.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9052 bytes_read=138297 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003793 heater_bed: target=0 temp=77.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.58 cputime=6680.646 memavail=3612948 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617724.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9058 bytes_read=138490 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003760 heater_bed: target=0 temp=77.2 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.58 cputime=6680.666 memavail=3613096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000 | |
| Stats 617725.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9064 bytes_read=138728 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003878 heater_bed: target=0 temp=77.1 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.58 cputime=6680.688 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617726.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9070 bytes_read=138935 bytes_retransmit=9 bytes_invalid=0 send_seq=1004 receive_seq=1004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003907 heater_bed: target=0 temp=77.1 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.53 cputime=6680.711 memavail=3612776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617727.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9076 bytes_read=139142 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003852 heater_bed: target=0 temp=77.1 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.53 cputime=6680.731 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617728.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9082 bytes_read=139380 bytes_retransmit=9 bytes_invalid=0 send_seq=1006 receive_seq=1006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003941 heater_bed: target=0 temp=77.1 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.53 cputime=6680.754 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617729.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9088 bytes_read=139587 bytes_retransmit=9 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 heater_bed: target=0 temp=77.1 pwm=0.000 z_thermal_adjust: temp=51.8 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.53 cputime=6680.776 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617730.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9094 bytes_read=139780 bytes_retransmit=9 bytes_invalid=0 send_seq=1008 receive_seq=1008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003855 heater_bed: target=0 temp=77.0 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.53 cputime=6680.796 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000 | |
| Stats 617731.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9100 bytes_read=140018 bytes_retransmit=9 bytes_invalid=0 send_seq=1009 receive_seq=1009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003823 heater_bed: target=0 temp=77.0 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.57 cputime=6680.817 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617732.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9106 bytes_read=140239 bytes_retransmit=9 bytes_invalid=0 send_seq=1010 receive_seq=1010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003887 heater_bed: target=0 temp=77.0 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.57 cputime=6680.838 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617733.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9112 bytes_read=140432 bytes_retransmit=9 bytes_invalid=0 send_seq=1011 receive_seq=1011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003844 heater_bed: target=0 temp=77.0 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.57 cputime=6680.859 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617734.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9118 bytes_read=140662 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003856 heater_bed: target=0 temp=76.9 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.7 pwm=0.000 sysload=2.57 cputime=6680.882 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617735.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9124 bytes_read=140856 bytes_retransmit=9 bytes_invalid=0 send_seq=1013 receive_seq=1013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003811 heater_bed: target=0 temp=76.9 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.57 cputime=6680.903 memavail=3612952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617736.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9130 bytes_read=141049 bytes_retransmit=9 bytes_invalid=0 send_seq=1014 receive_seq=1014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003914 heater_bed: target=0 temp=76.9 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.44 cputime=6680.924 memavail=3612896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617737.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9136 bytes_read=141301 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003977 heater_bed: target=0 temp=76.9 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.44 cputime=6680.946 memavail=3612928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617738.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9142 bytes_read=141508 bytes_retransmit=9 bytes_invalid=0 send_seq=1016 receive_seq=1016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003943 heater_bed: target=0 temp=76.8 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.44 cputime=6680.968 memavail=3613020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000 | |
| Stats 617739.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9148 bytes_read=141701 bytes_retransmit=9 bytes_invalid=0 send_seq=1017 receive_seq=1017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=76.8 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.44 cputime=6680.989 memavail=3613020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617740.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9154 bytes_read=141939 bytes_retransmit=9 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004106 heater_bed: target=0 temp=76.8 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.44 cputime=6681.011 memavail=3612904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617741.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9160 bytes_read=142146 bytes_retransmit=9 bytes_invalid=0 send_seq=1019 receive_seq=1019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004018 heater_bed: target=0 temp=76.8 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.41 cputime=6681.031 memavail=3613032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617742.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9166 bytes_read=142353 bytes_retransmit=9 bytes_invalid=0 send_seq=1020 receive_seq=1020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004001 heater_bed: target=0 temp=76.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.41 cputime=6681.053 memavail=3613132 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617743.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9172 bytes_read=142591 bytes_retransmit=9 bytes_invalid=0 send_seq=1021 receive_seq=1021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003955 heater_bed: target=0 temp=76.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.41 cputime=6681.077 memavail=3613036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617744.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9178 bytes_read=142798 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003870 heater_bed: target=0 temp=76.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.41 cputime=6681.098 memavail=3613036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617745.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9184 bytes_read=142991 bytes_retransmit=9 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003945 heater_bed: target=0 temp=76.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.41 cputime=6681.119 memavail=3613036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617746.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9190 bytes_read=143229 bytes_retransmit=9 bytes_invalid=0 send_seq=1024 receive_seq=1024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003987 heater_bed: target=0 temp=76.7 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.45 cputime=6681.141 memavail=3613012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617747.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9196 bytes_read=143450 bytes_retransmit=9 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003999 heater_bed: target=0 temp=76.6 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.45 cputime=6681.163 memavail=3613068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000 | |
| Stats 617748.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9202 bytes_read=143658 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003990 heater_bed: target=0 temp=76.6 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.45 cputime=6681.184 memavail=3613040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617749.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9208 bytes_read=143881 bytes_retransmit=9 bytes_invalid=0 send_seq=1027 receive_seq=1027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004054 heater_bed: target=0 temp=76.6 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.45 cputime=6681.206 memavail=3613040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617750.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9214 bytes_read=144088 bytes_retransmit=9 bytes_invalid=0 send_seq=1028 receive_seq=1028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004044 heater_bed: target=0 temp=76.5 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.45 cputime=6681.227 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617751.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9220 bytes_read=144296 bytes_retransmit=9 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004126 heater_bed: target=0 temp=76.5 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.42 cputime=6681.249 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617752.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9226 bytes_read=144533 bytes_retransmit=9 bytes_invalid=0 send_seq=1030 receive_seq=1030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004180 heater_bed: target=0 temp=76.5 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.42 cputime=6681.271 memavail=3613372 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617753.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9232 bytes_read=144740 bytes_retransmit=9 bytes_invalid=0 send_seq=1031 receive_seq=1031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004138 heater_bed: target=0 temp=76.5 pwm=0.000 z_thermal_adjust: temp=51.7 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.42 cputime=6681.293 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617754.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9238 bytes_read=144948 bytes_retransmit=9 bytes_invalid=0 send_seq=1032 receive_seq=1032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004212 heater_bed: target=0 temp=76.4 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.42 cputime=6681.314 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617755.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9244 bytes_read=145171 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004290 heater_bed: target=0 temp=76.4 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.6 pwm=0.000 sysload=2.42 cputime=6681.335 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617756.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9250 bytes_read=145378 bytes_retransmit=9 bytes_invalid=0 send_seq=1034 receive_seq=1034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004209 heater_bed: target=0 temp=76.4 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.46 cputime=6681.357 memavail=3613492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617757.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9256 bytes_read=145600 bytes_retransmit=9 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004216 heater_bed: target=0 temp=76.4 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.46 cputime=6681.378 memavail=3613308 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617758.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9262 bytes_read=145812 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004266 heater_bed: target=0 temp=76.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.46 cputime=6681.400 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617759.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9268 bytes_read=146009 bytes_retransmit=9 bytes_invalid=0 send_seq=1037 receive_seq=1037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004288 heater_bed: target=0 temp=76.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.46 cputime=6681.422 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617760.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9274 bytes_read=146217 bytes_retransmit=9 bytes_invalid=0 send_seq=1038 receive_seq=1038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004206 heater_bed: target=0 temp=76.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.46 cputime=6681.443 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617761.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9280 bytes_read=146440 bytes_retransmit=9 bytes_invalid=0 send_seq=1039 receive_seq=1039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004121 heater_bed: target=0 temp=76.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.35 cputime=6681.464 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617762.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9286 bytes_read=146661 bytes_retransmit=9 bytes_invalid=0 send_seq=1040 receive_seq=1040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004184 heater_bed: target=0 temp=76.3 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.35 cputime=6681.486 memavail=3613196 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617763.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9292 bytes_read=146869 bytes_retransmit=9 bytes_invalid=0 send_seq=1041 receive_seq=1041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004119 heater_bed: target=0 temp=76.2 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.35 cputime=6681.508 memavail=3613204 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617764.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9298 bytes_read=147092 bytes_retransmit=9 bytes_invalid=0 send_seq=1042 receive_seq=1042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004037 heater_bed: target=0 temp=76.2 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.35 cputime=6681.529 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617765.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9304 bytes_read=147299 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004025 heater_bed: target=0 temp=76.2 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.35 cputime=6681.551 memavail=3613292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617766.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9316 bytes_read=147523 bytes_retransmit=9 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003876 heater_bed: target=0 temp=76.2 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.40 cputime=6681.573 memavail=3613192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617767.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9322 bytes_read=147760 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003902 heater_bed: target=0 temp=76.1 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.40 cputime=6681.592 memavail=3613304 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617768.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9328 bytes_read=147967 bytes_retransmit=9 bytes_invalid=0 send_seq=1047 receive_seq=1047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003865 heater_bed: target=0 temp=76.1 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.40 cputime=6681.614 memavail=3613400 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617769.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9334 bytes_read=148175 bytes_retransmit=9 bytes_invalid=0 send_seq=1048 receive_seq=1048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003841 heater_bed: target=0 temp=76.1 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.40 cputime=6681.634 memavail=3613272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617770.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9340 bytes_read=148398 bytes_retransmit=9 bytes_invalid=0 send_seq=1049 receive_seq=1049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003929 heater_bed: target=0 temp=76.1 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.40 cputime=6681.655 memavail=3613300 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617771.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9346 bytes_read=148605 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003837 heater_bed: target=0 temp=76.1 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.45 cputime=6681.675 memavail=3613300 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617772.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9352 bytes_read=148827 bytes_retransmit=9 bytes_invalid=0 send_seq=1051 receive_seq=1051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003828 heater_bed: target=0 temp=76.0 pwm=0.000 z_thermal_adjust: temp=51.6 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.45 cputime=6681.697 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617773.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9358 bytes_read=149050 bytes_retransmit=9 bytes_invalid=0 send_seq=1052 receive_seq=1052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003823 heater_bed: target=0 temp=76.0 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.5 pwm=0.000 sysload=2.45 cputime=6681.718 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617774.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9364 bytes_read=149257 bytes_retransmit=9 bytes_invalid=0 send_seq=1053 receive_seq=1053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003771 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.45 cputime=6681.739 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617775.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9370 bytes_read=149465 bytes_retransmit=9 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003822 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.45 cputime=6681.759 memavail=3613480 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617776.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9376 bytes_read=149688 bytes_retransmit=9 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003884 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6681.782 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617777.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9382 bytes_read=149909 bytes_retransmit=9 bytes_invalid=0 send_seq=1056 receive_seq=1056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003880 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6681.803 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617778.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9388 bytes_read=150117 bytes_retransmit=9 bytes_invalid=0 send_seq=1057 receive_seq=1057 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003890 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6681.824 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617779.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9394 bytes_read=150340 bytes_retransmit=9 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003842 heater_bed: target=0 temp=75.9 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6681.845 memavail=3613320 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617780.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9400 bytes_read=150547 bytes_retransmit=9 bytes_invalid=0 send_seq=1059 receive_seq=1059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003927 heater_bed: target=0 temp=75.8 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6681.866 memavail=3613332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617781.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9406 bytes_read=150755 bytes_retransmit=9 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003848 heater_bed: target=0 temp=75.8 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.61 cputime=6681.887 memavail=3613252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617782.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9412 bytes_read=150980 bytes_retransmit=9 bytes_invalid=0 send_seq=1061 receive_seq=1061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003757 heater_bed: target=0 temp=75.8 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.61 cputime=6681.910 memavail=3613468 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617783.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9418 bytes_read=151177 bytes_retransmit=9 bytes_invalid=0 send_seq=1062 receive_seq=1062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003782 heater_bed: target=0 temp=75.8 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.61 cputime=6681.930 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617784.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9424 bytes_read=151385 bytes_retransmit=9 bytes_invalid=0 send_seq=1063 receive_seq=1063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003759 heater_bed: target=0 temp=75.7 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.61 cputime=6681.950 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617785.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9430 bytes_read=151608 bytes_retransmit=9 bytes_invalid=0 send_seq=1064 receive_seq=1064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003756 heater_bed: target=0 temp=75.7 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.61 cputime=6681.971 memavail=3613260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617786.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9436 bytes_read=151815 bytes_retransmit=9 bytes_invalid=0 send_seq=1065 receive_seq=1065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003670 heater_bed: target=0 temp=75.7 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.56 cputime=6681.992 memavail=3613452 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617787.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9442 bytes_read=152037 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003680 heater_bed: target=0 temp=75.7 pwm=0.000 z_thermal_adjust: temp=51.5 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.56 cputime=6682.013 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617788.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9448 bytes_read=152274 bytes_retransmit=9 bytes_invalid=0 send_seq=1067 receive_seq=1067 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003616 heater_bed: target=0 temp=75.6 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.56 cputime=6682.035 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617789.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9454 bytes_read=152467 bytes_retransmit=9 bytes_invalid=0 send_seq=1068 receive_seq=1068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003622 heater_bed: target=0 temp=75.6 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.56 cputime=6682.055 memavail=3613324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617790.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9460 bytes_read=152675 bytes_retransmit=9 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003574 heater_bed: target=0 temp=75.6 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.56 cputime=6682.076 memavail=3613336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617791.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9466 bytes_read=152912 bytes_retransmit=9 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003668 heater_bed: target=0 temp=75.6 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.67 cputime=6682.099 memavail=3613336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000 | |
| Stats 617792.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9472 bytes_read=153119 bytes_retransmit=9 bytes_invalid=0 send_seq=1071 receive_seq=1071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003661 heater_bed: target=0 temp=75.6 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.67 cputime=6682.120 memavail=3613432 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617793.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9478 bytes_read=153327 bytes_retransmit=9 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003768 heater_bed: target=0 temp=75.5 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.67 cputime=6682.141 memavail=3613464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617794.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9484 bytes_read=153564 bytes_retransmit=9 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003718 heater_bed: target=0 temp=75.5 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.67 cputime=6682.164 memavail=3613464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617795.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9490 bytes_read=153757 bytes_retransmit=9 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003673 heater_bed: target=0 temp=75.5 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.67 cputime=6682.185 memavail=3613544 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617796.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9496 bytes_read=153965 bytes_retransmit=9 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003675 heater_bed: target=0 temp=75.5 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.62 cputime=6682.206 memavail=3613464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617797.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9502 bytes_read=154216 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003769 heater_bed: target=0 temp=75.5 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.62 cputime=6682.228 memavail=3613464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000 | |
| Stats 617798.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9508 bytes_read=154409 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003749 heater_bed: target=0 temp=75.4 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.62 cputime=6682.249 memavail=3613468 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617799.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9514 bytes_read=154617 bytes_retransmit=9 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003790 heater_bed: target=0 temp=75.4 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.62 cputime=6682.270 memavail=3613468 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617800.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9520 bytes_read=154854 bytes_retransmit=9 bytes_invalid=0 send_seq=1079 receive_seq=1079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003719 heater_bed: target=0 temp=75.4 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.62 cputime=6682.292 memavail=3613448 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617801.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9526 bytes_read=155047 bytes_retransmit=9 bytes_invalid=0 send_seq=1080 receive_seq=1080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003641 heater_bed: target=0 temp=75.4 pwm=0.000 z_thermal_adjust: temp=51.4 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6682.312 memavail=3613456 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617802.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9532 bytes_read=155269 bytes_retransmit=9 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003665 heater_bed: target=0 temp=75.3 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.4 pwm=0.000 sysload=2.57 cputime=6682.334 memavail=3613464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000 | |
| Stats 617803.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9538 bytes_read=155506 bytes_retransmit=9 bytes_invalid=0 send_seq=1082 receive_seq=1082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003589 heater_bed: target=0 temp=75.3 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.57 cputime=6682.358 memavail=3613328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617804.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9544 bytes_read=155699 bytes_retransmit=9 bytes_invalid=0 send_seq=1083 receive_seq=1083 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003625 heater_bed: target=0 temp=75.3 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.57 cputime=6682.379 memavail=3613716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617805.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9550 bytes_read=155921 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003678 heater_bed: target=0 temp=75.3 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.57 cputime=6682.400 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617806.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9556 bytes_read=156128 bytes_retransmit=9 bytes_invalid=0 send_seq=1085 receive_seq=1085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003603 heater_bed: target=0 temp=75.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.69 cputime=6682.423 memavail=3613592 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617807.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9562 bytes_read=156330 bytes_retransmit=9 bytes_invalid=0 send_seq=1086 receive_seq=1086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003533 heater_bed: target=0 temp=75.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.69 cputime=6682.444 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617808.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9568 bytes_read=156553 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003564 heater_bed: target=0 temp=75.2 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.69 cputime=6682.466 memavail=3613980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617809.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9574 bytes_read=156775 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003555 heater_bed: target=0 temp=75.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.69 cputime=6682.488 memavail=3613728 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617810.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9580 bytes_read=156968 bytes_retransmit=9 bytes_invalid=0 send_seq=1089 receive_seq=1089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003613 heater_bed: target=0 temp=75.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.69 cputime=6682.509 memavail=3613716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617811.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9586 bytes_read=157191 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003639 heater_bed: target=0 temp=75.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.71 cputime=6682.530 memavail=3613716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617812.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9592 bytes_read=157427 bytes_retransmit=9 bytes_invalid=0 send_seq=1091 receive_seq=1091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003717 heater_bed: target=0 temp=75.1 pwm=0.000 z_thermal_adjust: temp=51.3 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.71 cputime=6682.552 memavail=3613652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617813.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9598 bytes_read=157620 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003802 heater_bed: target=0 temp=75.1 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.71 cputime=6682.573 memavail=3613620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000 | |
| Stats 617814.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9604 bytes_read=157843 bytes_retransmit=9 bytes_invalid=0 send_seq=1093 receive_seq=1093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003815 heater_bed: target=0 temp=75.0 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.71 cputime=6682.595 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617815.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9610 bytes_read=158065 bytes_retransmit=9 bytes_invalid=0 send_seq=1094 receive_seq=1094 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003846 heater_bed: target=0 temp=75.0 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.71 cputime=6682.617 memavail=3613776 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617816.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9616 bytes_read=158258 bytes_retransmit=9 bytes_invalid=0 send_seq=1095 receive_seq=1095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003767 heater_bed: target=0 temp=75.0 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6682.638 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617817.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9622 bytes_read=158510 bytes_retransmit=9 bytes_invalid=0 send_seq=1096 receive_seq=1096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003745 heater_bed: target=0 temp=75.0 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6682.660 memavail=3613864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617818.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9628 bytes_read=158717 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003736 heater_bed: target=0 temp=74.9 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6682.682 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617819.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9634 bytes_read=158910 bytes_retransmit=9 bytes_invalid=0 send_seq=1098 receive_seq=1098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003779 heater_bed: target=0 temp=74.9 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6682.702 memavail=3613720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617820.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9640 bytes_read=159148 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003792 heater_bed: target=0 temp=74.9 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.65 cputime=6682.724 memavail=3613724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617821.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9646 bytes_read=159355 bytes_retransmit=9 bytes_invalid=0 send_seq=1100 receive_seq=1100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003832 heater_bed: target=0 temp=74.9 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.68 cputime=6682.747 memavail=3613748 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617822.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9652 bytes_read=159562 bytes_retransmit=9 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003857 heater_bed: target=0 temp=74.8 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.68 cputime=6682.768 memavail=3613628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617823.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9658 bytes_read=159800 bytes_retransmit=9 bytes_invalid=0 send_seq=1102 receive_seq=1102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003814 heater_bed: target=0 temp=74.8 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.68 cputime=6682.791 memavail=3613724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000 | |
| Stats 617824.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9664 bytes_read=160007 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003849 heater_bed: target=0 temp=74.8 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.68 cputime=6682.813 memavail=3613732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617825.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9670 bytes_read=160200 bytes_retransmit=9 bytes_invalid=0 send_seq=1104 receive_seq=1104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003897 heater_bed: target=0 temp=74.8 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.68 cputime=6682.833 memavail=3613732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617826.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9676 bytes_read=160438 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003833 heater_bed: target=0 temp=74.7 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.87 cputime=6682.856 memavail=3614152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617827.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9688 bytes_read=160659 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003919 heater_bed: target=0 temp=74.7 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.87 cputime=6682.880 memavail=3614176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617828.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9694 bytes_read=160868 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003933 heater_bed: target=0 temp=74.7 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.3 pwm=0.000 sysload=2.87 cputime=6682.901 memavail=3614248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617829.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9700 bytes_read=161103 bytes_retransmit=9 bytes_invalid=0 send_seq=1109 receive_seq=1109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003960 heater_bed: target=0 temp=74.7 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.87 cputime=6682.923 memavail=3614136 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617830.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9706 bytes_read=161296 bytes_retransmit=9 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003873 heater_bed: target=0 temp=74.6 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.87 cputime=6682.945 memavail=3614088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617831.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9712 bytes_read=161485 bytes_retransmit=9 bytes_invalid=0 send_seq=1111 receive_seq=1111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003979 heater_bed: target=0 temp=74.6 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.88 cputime=6682.966 memavail=3614156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617832.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9718 bytes_read=161737 bytes_retransmit=9 bytes_invalid=0 send_seq=1112 receive_seq=1112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004040 heater_bed: target=0 temp=74.6 pwm=0.000 z_thermal_adjust: temp=51.2 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.88 cputime=6682.989 memavail=3614188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617833.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9724 bytes_read=161944 bytes_retransmit=9 bytes_invalid=0 send_seq=1113 receive_seq=1113 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004044 heater_bed: target=0 temp=74.6 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.88 cputime=6683.010 memavail=3614156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617834.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9730 bytes_read=162137 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=74.6 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.88 cputime=6683.031 memavail=3614220 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 617835.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9736 bytes_read=162375 bytes_retransmit=9 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003976 heater_bed: target=0 temp=74.5 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.88 cputime=6683.053 memavail=3614052 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617836.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9742 bytes_read=162582 bytes_retransmit=9 bytes_invalid=0 send_seq=1116 receive_seq=1116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180003973 heater_bed: target=0 temp=74.5 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.89 cputime=6683.075 memavail=3614156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617837.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9748 bytes_read=162775 bytes_retransmit=9 bytes_invalid=0 send_seq=1117 receive_seq=1117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004069 heater_bed: target=0 temp=74.5 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.89 cputime=6683.095 memavail=3614284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000 | |
| Stats 617838.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9754 bytes_read=163027 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004022 heater_bed: target=0 temp=74.5 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.89 cputime=6683.118 memavail=3614148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000 | |
| Stats 617839.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9760 bytes_read=163234 bytes_retransmit=9 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004039 heater_bed: target=0 temp=74.5 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.89 cputime=6683.139 memavail=3614156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617840.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9766 bytes_read=163427 bytes_retransmit=9 bytes_invalid=0 send_seq=1120 receive_seq=1120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004136 heater_bed: target=0 temp=74.4 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.89 cputime=6683.160 memavail=3614160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 617841.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9772 bytes_read=163665 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004214 heater_bed: target=0 temp=74.4 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.82 cputime=6683.181 memavail=3614280 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617842.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9778 bytes_read=163872 bytes_retransmit=9 bytes_invalid=0 send_seq=1122 receive_seq=1122 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004125 heater_bed: target=0 temp=74.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.82 cputime=6683.203 memavail=3614096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617843.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9784 bytes_read=164079 bytes_retransmit=9 bytes_invalid=0 send_seq=1123 receive_seq=1123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004194 heater_bed: target=0 temp=74.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.82 cputime=6683.224 memavail=3614160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617844.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9790 bytes_read=164317 bytes_retransmit=9 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004266 heater_bed: target=0 temp=74.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.82 cputime=6683.245 memavail=3614164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000 | |
| Stats 617845.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9796 bytes_read=164524 bytes_retransmit=9 bytes_invalid=0 send_seq=1125 receive_seq=1125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004230 heater_bed: target=0 temp=74.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.82 cputime=6683.267 memavail=3614156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 617846.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=9802 bytes_read=164717 bytes_retransmit=9 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180004295 heater_bed: target=0 temp=74.3 pwm=0.000 z_thermal_adjust: temp=51.1 chamber_heater: target=0 temp=48.2 pwm=0.000 sysload=2.83 cputime=6683.288 memavail=3614228 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000 | |
| Stats 617847.8: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 b |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment