ARCH LINUX WITH MAINLINE KERNEL FOR TOSHIBA AC100 [paz00 / dynabookaz]

ac100-kernel.md

ARCH LINUX WITH MAINLINE KERNEL FOR TOSHIBA AC100

all u need

• 1-2 hours of your life
• build envirment for the Kernel
• device with Ubuntu and nvflash
• AC100
• mini-usb cabel
• usb-stick >512MB

build the kernel

1. setup the build enviorment

   • create the work directory:

     mkdir -p ~/ac100/output_files

2. get the kernel source

   • get the sources:

     curl -LO https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.5.2.tar.xz

     cd linux-4.5.2

3. build the kernel

   • genrate the config

     make tegra_defconfig ARCH=arm

   • adjust the config for:

     1. Kernel low-level debugging options

        in Kernel hacking

        to OFF

     2. USB Video Class

        in Device drivers --> Multimedia support --> Media USB Adapters

        to MODULE

     3. USB NETWORK Device [only if like to use anadapter] you will find the availbe Modules under

        in Device drivers --> Network device support --> USB Network Adapters

        to MODULE

     make menuconfig ARCH=arm

   • build zIMAGE, modules, dtb

     make zImage modules dtbs INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

   • build install-modules

     make modules_install INSTALL_MOD_PATH=../output_files INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

   • copy dtb and zImage to the output_files directory

     cp arch/arm/boot/dts/tegra20-paz00.dtb ../output_files

     cp arch/arm/boot/zImage ../output_files

4. make output flashable

   • change into output_files directory

     cd ../output_files

   • create needed folders

     mkdir boot usr

   • move lib into usr [to avoid breaks of arch]

     mv lib usr

   • move zImage and dtb into boot

     mv zImage boot

     mv tegra20-paz00.dtb boot

   • create boot.cmd

     
       cat <<'EOF' > ~/ac100/output_files/boot/boot.cmd
       setenv bootargs 'root=/dev/mmcblk0p1 rootfstype=ext4 rootwait'
       ext2load mmc 0:1 0x1000000 /boot/zImage
       ext2load mmc 0:1 0x2000000 /boot/tegra20-paz00.dtb
       bootz 0x1000000 - 0x2000000
       EOF
       

   • create directory etc

     mkdir etc

   • add fstab

     
       cat <<'EOF' > ~/ac100/output_files/etc/fstab
       /dev/mmcblk0p1  /   ext4    rw,noatime,commit=30,barrier=1,data=ordered    0    0
       EOF
       

   • pack the files

     tar cf kernel.tar boot usr etc

5. prepare pen drive

   • copy kernel.tar to pen drive

     cp ~/ac100/output_files/kernel.tar < mountpoint of the pen drive >

   • get Arch Linux filesystem for Tegra systems

     curl -o < mountpoint of the pen drive > http://archlinuxarm.org/os/ArchLinuxARM-trimslice-latest.tar.gz

6. boot AC100 into recovery mode

   • press ctrl + esc + Power

7. install on the flash host nvflash

   curl -O /tmp https://phablet-paz00.googlecode.com/files/nvflash_20110628-2_all.deb ; sudo dpkg -i nvflash_20110628-2_all.deb

8. connect AC100 with your flash Host

9. get and boot a minimal SOSUBOOT

   • on the flash Host

     curl -O /tmp https://dl.dropboxusercontent.com/u/40761340/Test/sos-uboot-r5-2013-11-10.bin nvflash --bl sos-uboot-r5-2013-11-10.bin --go

   • on the AC100

     ./switch-to-uboot

10. prepare the AC100

    • create one new partions [maybe u like to backup the old once]

      
        parted /dev/mmcblk0 mklabel gpt
        parted /dev/mmcblk0 -s mkpart primary 7168s '100%'
        parted /dev/mmcblk0 -s name 1 UDB
        

    • create filesystem

      mkfs.ext4 /dev/mmcblk0p1

11. Install Kernel and OS

    • create mount point

      mkdir /target mkdir /source

    • mount the emmc

      mount -t ext4 /dev/mmcblk0p1 /target

    • inserte the stick and mount it

      mount -t vfat /dev/sda1 /source

    • change into directory /target

      cd /target

    • extract the ARCH Linux filesystem

      gzip -dc /source/ArchLinuxARM-trimslice-latest.tar.gz | tar xp

    • erase /boot to add new builded kernel for the AC100

      rm -rf boot/*

    • unpack kernel.tar

      tar xf /source/kern.tar

    • change into the /boot directory

      cd /target/boot

    • make the kernel bootable

      mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "ubootscript" -d boot.cmd boot.scr

    • sync for safety

      sync

    • unmount the pen drive and the emmc

      cd /; umount /target; umount /source

enjoy Arch Linux and the mainline kernel on your AC100 \o/

Source:

AC100 wiki
dev.cutecolors.jp.net
UNicksDaemon
ddevnet.net

@martin-ac100 did you ever manage to fix the shutdown issues on recent kernels? Or did you stick with the older ones?

Hi,
I use 5.12.4 kernel now and manually edit kernel/exit.c reverting changes before the patch.
Poweroff seems to be functional now - all LEDs go off, but I have a suspicion that the battery is still loosing power a bit..

Except that everything is working OK - playing videos from youtube in 480p, zram makes a great job for compiling larger projects, web browsing with otter-browser is quite usable too.

Hi, thanks for the reply. I still have a couple of question for you.

manually edit kernel/exit.c reverting changes before the patch

Does this mean that you replace the file with an older version from "working" kernels?
Also did you change anything else in the config when building the kernel other than the three things mentioned by Nokius?

Personally I'm still at kernel 5.11.2, I've stopped updating it since it's a long process and I have no issues other than the poweroff. To be fair though I just use the shell. Thanks again.

Does this mean that you replace the file with an older version from "working" kernels?

NO, I don't think it would work. I just add lines, that were removed (-) and remove line that were added by the patch (+)

--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -577,10 +577,6 @@ static struct task_struct *find_child_re
        }

        write_unlock_irq(&tasklist_lock);
-       if (unlikely(pid_ns == &init_pid_ns)) {
-               panic("Attempted to kill init! exitcode=0x%08x\n",
-                       father->signal->group_exit_code ?: father->exit_code);
-       }

        list_for_each_entry_safe(p, n, dead, ptrace_entry) {
                list_del_init(&p->ptrace_entry);
@@ -823,6 +819,14 @@ void __noreturn do_exit(long code)
        acct_update_integrals(tsk);
        group_dead = atomic_dec_and_test(&tsk->signal->live);
        if (group_dead) {
+               /*
+                * If the last thread of global init has exited, panic
+                * immediately to get a useable coredump.
+                */
+               if (unlikely(is_global_init(tsk)))
+                       panic("Attempted to kill init! exitcode=0x%08x\n",
+                               tsk->signal->group_exit_code ?: (int)code);
+
 #ifdef CONFIG_POSIX_TIMERS
                hrtimer_cancel(&tsk->signal->real_timer);
                exit_itimers(tsk->signal);

Also did you change anything else in the config when building the kernel other than the three things mentioned by Nokius?

You can download my config file here
https://drive.google.com/file/d/1acxVstwBeb6yaodeEKEXbMPwLHmASQTf/view?usp=sharing

and my kernel here
https://drive.google.com/file/d/1gCJOGRRA-zVC5KFSZoA5BjUqAMR_nI29/view?usp=sharing

@martin-ac100 Thanks a lot! And good job on spotting the issue too.

@martin-ac100 seems like your compilation use IPv6 only. How can I change it for IPv4 only (disable IPv6/enable IPv4)?

Good morning,
After some time, I tried to update the system.
I have locked the linux-armv7, libdrm and mesa packages in the pacman.conf file.....but every time I run Syu, the update always results in: kernel panic.
Am I forgetting some steps or? Does anyone have a stable image to share?

Greetings in advantage.