Skip to content

Instantly share code, notes, and snippets.

@Oberon00

Oberon00/last_kmsg

Created September 8, 2014 17:50
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save Oberon00/c1f2b366cbe2a98435e6 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save Oberon00/c1f2b366cbe2a98435e6 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
last_kmsg
<6>[ 0.000000] c0 Initializing cgroup subsys cpu
<5>[ 0.000000] c0 Linux version 3.0.64-CM-g526d694-dirty (cn@cn0-m2) (gcc version 4.7 (GCC) ) #3 SMP PREEMPT Mon Sep 8 19:37:02 CEST 2014
<4>[ 0.000000] c0 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
<4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] c0 Machine: SMDK4210
<4>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
<4>[ 0.000000] c0 CPU EXYNOS4210 (id 0x43210211)
<7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
<6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
<3>[ 0.000000] c0 audiocdclk: no parent clock specified
<3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
<7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
<7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
<6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=180633605 V=300000000
<6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
<6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
<6>[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
<6>[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
<6>[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
<6>[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_fimd: source is mout_mpll (6), rate is 50000000
<6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll (6), rate is 50000000
<6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
<6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 100000000
<6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 100000000
<6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 12000000
<0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
<0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
<7>[ 0.000000] c0 On node 0 totalpages: 262144
<7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0f59260, node_mem_map c134c000
<7>[ 0.000000] c0 Normal zone: 1600 pages used for memmap
<7>[ 0.000000] c0 Normal zone: 0 pages reserved
<7>[ 0.000000] c0 Normal zone: 203200 pages, LIFO batch:31
<7>[ 0.000000] c0 HighMem zone: 448 pages used for memmap
<7>[ 0.000000] c0 HighMem zone: 56896 pages, LIFO batch:15
<6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
<6>[ 0.000000] c0 PERCPU: Embedded 7 pages/cpu @c1b54000 s7136 r8192 d13344 u32768
<7>[ 0.000000] c0 pcpu-alloc: s7136 r8192 d13344 u32768 alloc=8*4096
<7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
<5>[ 0.000000] c0 Kernel command line: loglevel=4 console=ram androidboot.serialno=0019b9162b3b8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m
<6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:1364d sec_log_buf:fc200000 sec_log_size:1048576
<6>[ 0.000000] c0 sec_log_save_old: saved old log at 79437@c1b63160
<6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xcd900000
<6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] c0 Memory: 1024MB = 1024MB total
<5>[ 0.000000] c0 Memory: 803844k/803844k available, 244732k reserved, 229376K highmem
<5>[ 0.000000] c0 Virtual kernel memory layout:
<5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
<5>[ 0.000000] c0 vmalloc : 0xf2800000 - 0xfb000000 ( 136 MB)
<5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xf2000000 ( 800 MB)
<5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] c0 .init : 0xc0008000 - 0xc0644000 (6384 kB)
<5>[ 0.000000] c0 .text : 0xc0644000 - 0xc0d54000 (7232 kB)
<5>[ 0.000000] c0 .data : 0xc0d54000 - 0xc0f59dc0 (2072 kB)
<5>[ 0.000000] c0 .bss : 0xc0f59de4 - 0xc134b5b8 (4038 kB)
<6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
<6>[ 0.000000] c0 NR_IRQS:493
<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
<6>[ 0.000000] c0 Console: colour dummy device 80x30
<6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
<6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
<6>[ 0.000000] c0 Security Framework initialized
<6>[ 0.000000] c0 SELinux: Initializing.
<7>[ 0.000000] c0 SELinux: Starting in permissive mode
<6>[ 0.000000] c0 Mount-cache hash table entries: 512
<6>[ 0.000000] c0 Initializing cgroup subsys debug
<6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
<6>[ 0.000000] c0 Initializing cgroup subsys freezer
<6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
<6>[ 0.000000] c0 L310 cache controller enabled
<6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
<4>[ 0.030000] c1 CPU1: Booted secondary processor
<4>[ 0.030000] c1 CPU1: Booted secondary processor
<6>[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
<6>[ 0.040000] c0 Brought up 2 CPUs
<6>[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
<6>[ 0.045000] c0 print_constraints: dummy:
<6>[ 0.045000] c0 NET: Registered protocol family 16
<6>[ 0.050000] c0 universal_tsp_init touch : 356
<6>[ 0.050000] c0 smdkc210_machine_init() register sii9234 driver
<6>[ 0.050000] c0 Registered chained gpio int handler for interrupt 110.
<6>[ 0.050000] c0 Registered interrupt support for gpio group 20.
<6>[ 0.050000] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
<7>[ 0.050000] c0 usb: smdkc210_usbgadget_init: default luns=0, new luns=2
<7>[ 0.050000] c0 usb: smdkc210_usbgadget_init tune_mask=0x10380f, tune=0x10280b
<6>[ 0.050000] c0 ld9040_fb_init :: lcdtype=2
<6>[ 0.050000] c0 brcm_wlan_init: start
<6>[ 0.050000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
<6>[ 0.065000] c0 exynos4_pmu_init: PMU supports 4210(71)
<6>[ 0.065000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
<6>[ 0.065000] c0 EXYNOS4: Initializing architecture
<6>[ 0.065000] c0 s3c-adc samsung-adc-v3: attached adc driver
<6>[ 0.065000] c0 samsung-pd samsung-pd.0: power domain registered
<6>[ 0.065000] c0 samsung-pd samsung-pd.1: power domain registered
<6>[ 0.065000] c0 samsung-pd samsung-pd.2: power domain registered
<6>[ 0.065000] c0 lcd0 disable skip only one time
<6>[ 0.065000] c0 samsung-pd samsung-pd.3: power domain registered
<6>[ 0.065000] c0 samsung-pd samsung-pd.5: power domain registered
<6>[ 0.065000] c0 samsung-pd samsung-pd.4: power domain registered
<6>[ 0.065000] c0 samsung-pd samsung-pd.6: power domain registered
<6>[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
<6>[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
<6>[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
<6>[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
<6>[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
<6>[ 0.090000] c0 bio: create slab <bio-0> at 0
<5>[ 0.095000] c0 SCSI subsystem initialized
<6>[ 0.095000] c0 usbcore: registered new interface driver usbfs
<6>[ 0.095000] c0 usbcore: registered new interface driver hub
<6>[ 0.095000] c0 usbcore: registered new device driver usb
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.8: using pins 91 (SDA) and 89 (SCL)
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.9: using pins 163 (SDA) and 164 (SCL)
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.11: using pins 99 (SDA) and 107 (SCL)
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.14: using pins 136 (SDA) and 135 (SCL)
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.12: using pins 31 (SDA) and 33 (SCL)
<6>[ 0.095000] c0 i2c-gpio i2c-gpio.15: using pins 154 (SDA) and 156 (SCL)
<6>[ 0.100000] c0 i2c-gpio i2c-gpio.16: using pins 18 (SDA) and 19 (SCL)
<6>[ 0.100000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>[ 0.100000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>[ 0.100000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
<6>[ 0.100000] c0 max8997 5-0066: max8997_irq_init: PMIC ID(0x77)
<6>[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck1: 1350000, i:28
<6>[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck2: 1150000, i:20
<6>[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck5: 1200000, i:22
<6>[ 0.105000] c0 max8997-pmic max8997-pmic: RAMP REG(0xf9)
<6>[ 0.105000] c0 print_constraints: VADC_3.3V_C210: 3300 mV
<6>[ 0.105000] c0 print_constraints: VUSB_1.1V: 1100 mV
<6>[ 0.105000] c0 print_constraints: VMIPI_1.8V: 1800 mV
<6>[ 0.105000] c0 print_constraints: VHSIC_1.2V: 1200 mV
<6>[ 0.105000] c0 print_constraints: CAM_ISP_1.8V: 1800 mV
<6>[ 0.105000] c0 print_constraints: VUSB_3.3V: 3300 mV
<6>[ 0.105000] c0 print_constraints: VPLL_1.1V: 1100 mV
<6>[ 0.110000] c0 print_constraints: TOUCH_2.8V: 2800 mV
<6>[ 0.110000] c0 print_constraints: VT_CAM_1.8V: 1800 mV
<6>[ 0.110000] c0 print_constraints: VCC_3.0V_LCD: 3000 mV
<6>[ 0.110000] c0 print_constraints: VCC_2.8V_MOTOR: 2800 mV
<6>[ 0.110000] c0 print_constraints: LED_A_2.8V: 2800 mV
<6>[ 0.110000] c0 print_constraints: CAM_SENSOR_IO_1.8V: 1800 mV
<6>[ 0.110000] c0 print_constraints: VTF_2.8V: 2800 mV
<6>[ 0.110000] c0 print_constraints: TOUCH_LED_3.3V: 3000 <--> 3300 mV at 3000 mV
<6>[ 0.110000] c0 print_constraints: VDDQ_M1M2_1.2V: 1200 mV
<6>[ 0.115000] c0 print_constraints: vdd_arm range: 650 <--> 2225 mV at 1350 mV
<6>[ 0.115000] c0 print_constraints: vdd_int range: 650 <--> 2225 mV at 1150 mV
<6>[ 0.115000] c0 print_constraints: G3D_1.1V: 900 <--> 1200 mV at 1050 mV
<6>[ 0.115000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
<6>[ 0.115000] c0 print_constraints: VMEM_1.2V: 1200 mV
<6>[ 0.115000] c0 print_constraints: VCC_SUB_2.0V: 2000 mV
<6>[ 0.115000] c0 print_constraints: safeout1 range:
<6>[ 0.115000] c0 print_constraints: safeout2 range:
<6>[ 0.115000] c0 print_constraints: FLASH_CUR: 23 <--> 750 mA at 23 mA
<6>[ 0.115000] c0 print_constraints: MOVIE_CUR: 15 <--> 250 mA at 15 mA
<6>[ 0.115000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
<6>[ 0.120000] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
<6>[ 0.120000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
<6>[ 0.120000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.120000] c0 Bluetooth: Core ver 2.16
<6>[ 0.120000] c0 NET: Registered protocol family 31
<6>[ 0.120000] c0 Bluetooth: HCI device and connection manager initialized
<6>[ 0.120000] c0 Bluetooth: HCI socket layer initialized
<6>[ 0.120000] c0 Bluetooth: L2CAP socket layer initialized
<6>[ 0.120000] c0 Bluetooth: SCO socket layer initialized
<6>[ 0.120000] c0 cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.120000] c0 Switching to clocksource mct-frc
<6>[ 0.121188] c0 Switched to NOHz mode on CPU #0
<6>[ 0.121314] c1 Switched to NOHz mode on CPU #1
<6>[ 0.133558] c0 NET: Registered protocol family 2
<6>[ 0.133790] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.134549] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.136488] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.137839] c0 TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.137876] c0 TCP reno registered
<6>[ 0.137903] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.137963] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.138388] c0 NET: Registered protocol family 1
<6>[ 0.158702] c0 PMU: registered new PMU device of type 0
<6>[ 0.160129] c0 MUIC:[/home/cn/android/system/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c] func:uart_switch_init
<6>[ 0.160197] c0 ##MUIC [ /home/cn/android/system/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c ]- func : uart_switch_init !! val:-0-
<6>[ 0.161003] c0 regulator_consumer_probe: loading u1-regulator-consumer
<6>[ 0.161685] c0 wake enabled for irq 374
<6>[ 0.161900] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
<6>[ 0.162262] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
<6>[ 0.162295] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
<6>[ 0.162432] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
<6>[ 0.162465] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 0.162599] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
<6>[ 0.162631] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 0.163130] c0 audit: initializing netlink socket (disabled)
<5>[ 0.163193] c0 type=2000 audit(0.160:1): initialized
<4>[ 0.163712] c0 highmem bounce pool size: 64 pages
<6>[ 0.163962] c0 ashmem: initialized
<6>[ 0.177097] c0 fuse init (API version 7.16)
<6>[ 0.177568] c0 msgmni has been set to 1122
<7>[ 0.177686] c0 SELinux: Registering netfilter hooks
<6>[ 0.178169] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178204] c1 FIPS: No test for cipher_null (cipher_null-generic)
<6>[ 0.178295] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178328] c1 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[ 0.178418] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178450] c1 FIPS: No test for digest_null (digest_null-generic)
<6>[ 0.178539] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178571] c1 FIPS: No test for compress_null (compress_null-generic)
<6>[ 0.178662] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178744] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
<6>[ 0.178855] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.178917] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
<6>[ 0.179048] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.179117] c1 FIPS: self-tests for sha1-generic (sha1) passed
<6>[ 0.179223] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.179286] c1 FIPS: self-tests for sha224-generic (sha224) passed
<6>[ 0.179413] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.179467] c1 FIPS: self-tests for sha256-generic (sha256) passed
<6>[ 0.179573] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.179813] c1 FIPS: self-tests for sha384-generic (sha384) passed
<6>[ 0.179922] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.180180] c1 FIPS: self-tests for sha512-generic (sha512) passed
<6>[ 0.180318] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.180377] c1 FIPS: self-tests for des-generic (des) passed
<6>[ 0.180502] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.180561] c1 FIPS: self-tests for des3_ede-generic (des3_ede) passed
<6>[ 0.180699] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.180731] c1 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
<6>[ 0.180824] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.180913] c1 FIPS: self-tests for aes-generic (aes) passed
<6>[ 0.181021] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.181054] c1 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
<6>[ 0.181142] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.181660] c1 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
<6>[ 0.181825] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.181914] c1 FIPS: self-tests for crc32c-generic (crc32c) passed
<6>[ 0.182027] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.182060] c1 FIPS: No test for stdrng (krng)
<6>[ 0.182142] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.222719] c1 FIPS: self-tests for ansi_cprng (stdrng) passed
<6>[ 0.222835] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.222868] c1 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
<6>[ 0.223054] c0 FIPS: self-tests for non-FIPS md5 (md5) passed
<6>[ 0.223201] c0 FIPS: self-tests for sha1 (sha1) passed
<6>[ 0.223634] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.223704] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.223988] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
<6>[ 0.224565] c0 FIPS: self-tests for ecb(des) (ecb(des)) passed
<6>[ 0.224939] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.225074] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.225527] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.225697] c0 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
<6>[ 0.225988] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
<6>[ 0.226359] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.226464] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.226600] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[ 0.226875] c0 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
<6>[ 0.227246] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.227350] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.227789] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.227939] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[ 0.228201] c0 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
<6>[ 0.228340] c0 FIPS: self-tests for non-FIPS md4 (md4) passed
<6>[ 0.228467] c0 FIPS: self-tests for sha256 (sha256) passed
<6>[ 0.228836] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.228940] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.229202] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
<6>[ 0.229686] c0 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
<6>[ 0.230090] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.230196] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.230641] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.230912] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
<6>[ 0.231421] c0 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
<6>[ 0.231795] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.231900] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.232051] c0 FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[ 0.232322] c0 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
<6>[ 0.232698] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.232803] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.233282] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.233464] c0 FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[ 0.233776] c0 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
<6>[ 0.234154] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.234266] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.234706] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.234867] c0 FIPS: self-tests for ctr(aes-generic) (ctr(aes)) passed
<6>[ 0.235192] c0 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
<6>[ 0.235599] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.235704] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.236150] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.236792] c0 FIPS: self-tests for rfc3686(ctr(aes-generic)) (rfc3686(ctr(aes))) passed
<6>[ 0.238020] c0 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
<6>[ 0.238508] c0 FIPS: self-tests for sha384 (sha384) passed
<6>[ 0.238968] c0 FIPS: self-tests for sha512 (sha512) passed
<6>[ 0.239881] c0 FIPS: self-tests for non-FIPS deflate (deflate) passed
<6>[ 0.240665] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.240777] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.241010] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
<6>[ 0.241476] c0 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
<6>[ 0.241659] c0 FIPS: self-tests for crc32c (crc32c) passed
<6>[ 0.241786] c0 FIPS: self-tests for sha224 (sha224) passed
<6>[ 0.242156] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.242264] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.242707] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.243122] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-generic)) (cts(cbc(aes))) passed
<6>[ 0.243887] c0 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
<6>[ 0.244265] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.244374] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.244554] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
<6>[ 0.244912] c0 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
<6>[ 0.245494] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.245602] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.245852] c0 FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[ 0.246349] c0 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
<6>[ 0.246719] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.246827] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.247215] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[ 0.247981] c0 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
<6>[ 0.248352] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.248459] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.249333] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[ 0.251197] c0 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
<6>[ 0.251570] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.251677] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.252542] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[ 0.254276] c0 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
<6>[ 0.254645] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.254754] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.254985] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[ 0.255514] c0 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
<6>[ 0.335937] c0 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
<6>[ 0.335974] c0 FIPS: do kernel integrity check
<6>[ 0.522209] c0 FIPS: integrity check passed
<6>[ 0.522421] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
<6>[ 0.522529] c0 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
<6>[ 0.522627] c0 io scheduler noop registered
<6>[ 0.522653] c0 io scheduler deadline registered
<6>[ 0.522790] c0 io scheduler cfq registered (default)
<6>[ 0.522819] c0 io scheduler row registered
<6>[ 0.522843] c0 io scheduler sio registered
<3>[ 0.523055] c0 s3cfb s3cfb.0: div(32) max should be 16
<6>[ 0.523089] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
<6>[ 0.523167] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
<6>[ 0.523461] c0 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
<6>[ 0.525463] c0 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
<6>[ 0.527607] c0 Bootloader sent 'bootloaderfb' : 5EC00000
<6>[ 0.528624] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
<6>[ 0.528757] c0 s3cfb s3cfb.0: registered successfully
<6>[ 0.529444] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
<6>[ 0.529483] c0 mdnie mdnie: registered successfully
<6>[ 0.529930] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.605343] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
<6>[ 0.620078] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
<6>[ 0.640074] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
<6>[ 0.660076] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
<4>[ 0.675440] c0 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
<4>[ 0.675479] c0 Mali: mali_dvfs[0].vol = 950000
<4>[ 0.675507] c0 Mali: mali_dvfs[1].vol = 1050000
<4>[ 0.675535] c0 Mali: init_gpu_vol = 1050000
<4>[ 0.675620] c0 Mali: Mali frequency 266
<4>[ 0.675645] c0 Mali: init_mali_clock mali_clock c0ebfb0c
<4>[ 0.676107] c0 Mali: = regulator_set_voltage: 1050000, 1050000
<4>[ 0.676574] c0 Mali: Mali frequency 200
<4>[ 0.699937] c0 Mali: Mali device driver loaded
<4>[ 0.700336] c0 UMP: UMP device driver 0000 loaded
<6>[ 0.708678] c0 brd: module loaded
<6>[ 0.712869] c0 loop: module loaded
<6>[ 0.713540] c0 sec_jack_probe : Registering jack driver
<6>[ 0.714744] c0 wake enabled for irq 378
<6>[ 0.715292] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
<6>[ 0.715355] c0 max8997_muic_cfg_uart_gpio: path=0
<6>[ 0.715577] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
<6>[ 0.716700] c0 Loading pn544 driver
<6>[ 0.716760] c0 pn544_probe : IRQ num 367
<6>[ 0.716972] c0 pn544_probe : requesting IRQ 367
<6>[ 0.718715] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
<6>[ 0.718748] c0 lcd panel: ld9040 panel driver has been probed.
<6>[ 0.718940] c0 PPP generic driver version 2.4.2
<6>[ 0.719298] c0 PPP Deflate Compression module registered
<6>[ 0.719329] c0 PPP BSD Compression module registered
<6>[ 0.719382] c0 PPP MPPE Compression module registered
<6>[ 0.719412] c0 NET: Registered protocol family 24
<6>[ 0.719442] c0 tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.719470] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.719886] c0 host_notifier host_notifier.0: notifier_prove
<6>[ 0.720578] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.720961] c0 usbcore: registered new interface driver usblp
<6>[ 0.720994] c0 Initializing USB Mass Storage driver...
<6>[ 0.721163] c0 usbcore: registered new interface driver usb-storage
<6>[ 0.721197] c0 USB Mass Storage support registered.
<6>[ 0.721278] c0 otg pdata e40d5700, irq c09035d4
<6>[ 0.721573] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
<6>[ 0.721612] c0 s3c-udc : version 15 March 2009
<7>[ 0.721638] c0 init
<7>[ 0.722147] c0 usb: android_bind disconnect
<7>[ 0.722174] c0 usb: usb_gadget_disconnect
<7>[ 0.724172] c0 usb: usb_string_id cdev(0xe428f180)->next_string_id=1
<6>[ 0.724346] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.724386] c0 android_usb gadget: Number of LUNs=2
<6>[ 0.724416] c0 lun0: LUN: removable file: (no medium)
<6>[ 0.724445] c0 lun1: LUN: removable file: (no medium)
<7>[ 0.725323] c0 usb: usb_string_id cdev(0xe428f180)->next_string_id=2
<7>[ 0.725360] c0 usb: usb_string_id cdev(0xe428f180)->next_string_id=3
<7>[ 0.725400] c0 usb: usb_string_id cdev(0xe428f180)->next_string_id=4
<7>[ 0.725435] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
<7>[ 0.725466] c0 usb: composite_bind bcdDevice=0x0
<7>[ 0.725491] c0 usb: composite_bind composite_manufacturer=
<6>[ 0.725526] c0 android_usb gadget: android_usb ready
<6>[ 0.725552] c0 usb: Skip udc_enable
<6>[ 0.726672] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
<7>[ 0.726921] c0 [keys]PWR 0
<6>[ 0.727458] c0 input: sec_touchscreen as /devices/virtual/input/input2
<6>[ 0.845506] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
<3>[ 0.845553] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
<3>[ 0.853841] c0 [TSP] TSP chip is MXT224
<3>[ 0.920049] c0 [TSP] ta_status is 0
<3>[ 0.920071] c0 [TSP] mxt224_ta_probe
<3>[ 0.922089] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
<3>[ 0.922791] c0 [TSP] calibration success!!!
<6>[ 0.945056] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
<6>[ 0.970052] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
<6>[ 0.995184] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
<6>[ 0.996441] c0 using rtc device, max8997-rtc, for alarms
<6>[ 0.996496] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
<4>[ 0.996843] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>[ 0.997226] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
<6>[ 0.997424] c0 i2c /dev entries driver
<6>[ 1.000244] c0 lirc_dev: IR Remote Control driver registered, major 250
<6>[ 1.000281] c0 IR NEC protocol handler initialized
<6>[ 1.000308] c0 IR RC5(x) protocol handler initialized
<6>[ 1.000335] c0 IR RC6 protocol handler initialized
<6>[ 1.000360] c0 IR JVC protocol handler initialized
<6>[ 1.000386] c0 IR Sony protocol handler initialized
<6>[ 1.000411] c0 IR RC5 (streamzap) protocol handler initialized
<6>[ 1.000441] c0 IR LIRC bridge handler initialized
<6>[ 1.000466] c0 Linux video capture interface: v2.00
<7>[ 1.000779] c0 [S5K5BAFX] s5k5bafx_create_sysfs
<6>[ 1.001260] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
<6>[ 1.001329] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
<4>[ 1.001511] c0 Initialize JPEG driver
<4>[ 1.001987] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
<6>[ 1.002251] c0 s5p_int_src_ext_hpd()
<6>[ 1.002279] c0 s5p_hpd_read_gpio(0)
<6>[ 1.002474] c0 s5p_hpd_read_gpio(0)
<6>[ 1.002909] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
<4>[ 1.003071] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
<4>[ 1.003107] c0 i2c-core: driver [s5p_ddc] using legacy resume method
<6>[ 1.003619] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
<6>[ 1.004509] c0 sii9234_cfg_gpio()
<6>[ 1.004542] c0 Registered chained gpio int handler for interrupt 111.
<6>[ 1.004589] c0 Registered interrupt support for gpio group 10.
<6>[ 1.004625] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
<6>[ 1.004857] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
<6>[ 1.004961] c0 sii9234 : create mhl sysfile
<6>[ 1.005626] c0 input: sii9234_rcp as /devices/virtual/input/input3
<6>[ 1.006626] c0 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
<6>[ 1.008457] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
<6>[ 1.008570] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
<6>[ 1.008976] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
<6>[ 1.009246] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
<6>[ 1.010132] c0 max17042 9-0036: max17042_probe : is enable (1)
<6>[ 1.010167] c0 max17042 9-0036: max17042_init_regs
<6>[ 1.011278] c0 max17042 9-0036: fuel alert soc (2)
<6>[ 1.011305] c0 max17042 9-0036: max17042_alert_init
<6>[ 1.012923] c0 wake enabled for irq 371
<6>[ 1.014053] c0 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
<6>[ 1.014694] c0 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
<6>[ 1.017172] c0 max17042 9-0036: max17042_get_soc : soc(4335)
<6>[ 1.017204] c0 max17042_need_soc_recal: HW(0xe)
<6>[ 1.017232] c0 max17042 9-0036: max17042_get_soc : use raw (67), soc (68)
<6>[ 1.017878] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
<4>[ 1.018056] c0 i2c-core: driver [max17042] using legacy suspend method
<4>[ 1.018093] c0 i2c-core: driver [max17042] using legacy resume method
<6>[ 1.018921] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 1.019000] c0 Bluetooth: HCI UART driver ver 2.2
<6>[ 1.019030] c0 Bluetooth: HCI H4 protocol initialized
<6>[ 1.019529] c0 cpuidle: using governor ladder
<6>[ 1.020297] c0 cpuidle: using governor menu
<6>[ 1.020456] c0 mshci: Mobile Storage Host Controller Interface driver
<6>[ 1.020491] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
<6>[ 1.020659] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
<3>[ 1.020934] c0 mmc0: Version ID 0x5342230a.
<6>[ 1.021184] c0 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
<6>[ 1.021667] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
<6>[ 1.021943] c0 sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.021978] c0 sdhci: Copyright(c) Pierre Ossman
<6>[ 1.022092] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
<6>[ 1.022344] c0 mmc1: vtf_2.8v regulator found
<3>[ 1.050366] c0 mmc0: cmd 52 response timeout error
<3>[ 1.050737] c0 mmc0: cmd 52 response timeout error
<3>[ 1.054295] c0 mmc0: cmd 8 response timeout error
<3>[ 1.054660] c0 mmc0: cmd 5 response timeout error
<3>[ 1.055006] c0 mmc0: cmd 5 response timeout error
<3>[ 1.055370] c0 mmc0: cmd 5 response timeout error
<3>[ 1.055715] c0 mmc0: cmd 5 response timeout error
<3>[ 1.056084] c0 mmc0: cmd 55 response timeout error
<3>[ 1.056450] c0 mmc0: cmd 55 response timeout error
<3>[ 1.056816] c0 mmc0: cmd 55 response timeout error
<3>[ 1.057179] c0 mmc0: cmd 55 response timeout error
<6>[ 1.076788] c1 mmc0: VYL00M: 15010056594c30304d19b9162b3b8e91
<6>[ 1.124244] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
<6>[ 1.124448] c0 wake enabled for irq 380
<6>[ 1.124473] c0 mmc1: card inserted.
<6>[ 1.124561] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
<3>[ 1.124640] c0 mmc2: no vmmc regulator found
<6>[ 1.124900] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
<6>[ 1.130287] c0 usbcore: registered new interface driver usbhid
<6>[ 1.130320] c0 usbhid: USB HID core driver
<6>[ 1.130809] c0 logger: created 2048K log 'log_main'
<6>[ 1.131014] c0 logger: created 256K log 'log_events'
<6>[ 1.131208] c0 logger: created 1024K log 'log_radio'
<6>[ 1.131401] c0 logger: created 256K log 'log_system'
<6>[ 1.131594] c0 logger: created 256K log 'log_sf'
<6>[ 1.131625] c0 sec_getlog_supply_loggerinfo: 0xc0f821c8 0xc11821c8 0xc12821c8 0xc12c21c8
<6>[ 1.132011] c0 k3dh_probe: is started.
<3>[ 1.132334] c0 using defualt position
<6>[ 1.132809] c0 k3dh_probe: is successful.
<6>[ 1.133408] c0 input: gyro_sensor as /devices/virtual/input/input4
<6>[ 1.134286] c0 akm8975_probe is called.
<6>[ 1.135814] c0 akm8975_probe: asa_x = 156, asa_y = 156, asa_z = 166
<6>[ 1.136313] c0 Registered sensors device: magnetic_sensor
<6>[ 1.136355] c0 akm8975_probe is successful.
<6>[ 1.149371] c0 mmc0 : 00 : 25 : 20110416 : 0.
<4>[ 1.150725] c0 mmc0: Voltage range not supported for power class.
<3>[ 1.150762] c0 mmc0: power class selection to bus width 8 failed
<4>[ 1.150955] c0 mmc0: Voltage range not supported for power class.
<3>[ 1.150991] c0 mmc0: power class selection to bus width 8 ddr 2 failed
<6>[ 1.151149] c0 mmc0: new high speed DDR MMC card at address 0001
<6>[ 1.151663] c0 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
<4>[ 1.157316] c0 GPT:Primary header thinks Alt. header is not at the end of the disk.
<4>[ 1.157361] c0 GPT:30775295 != 30777343
<4>[ 1.157385] c0 GPT:Alternate GPT header not at the end of the disk.
<4>[ 1.157420] c0 GPT:30775295 != 30777343
<4>[ 1.157442] c0 GPT: Use GNU Parted to correct GPT errors.
<6>[ 1.157567] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
<6>[ 1.190370] c0 mmc1: cmd 52 command timeout error
<6>[ 1.190730] c0 mmc1: cmd 52 command timeout error
<6>[ 1.194588] c0 mmc1: cmd 5 command timeout error
<6>[ 1.194933] c0 mmc1: cmd 5 command timeout error
<6>[ 1.195262] c0 mmc1: cmd 5 command timeout error
<3>[ 1.195346] c0 cm3663_setup_reg: initial proximity value = 1
<6>[ 1.195592] c0 mmc1: cmd 5 command timeout error
<6>[ 1.197566] c0 input: proximity_sensor as /devices/virtual/input/input5
<6>[ 1.200172] c0 input: light_sensor as /devices/virtual/input/input6
<6>[ 1.202855] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
<6>[ 1.202967] c0 audss_init: RCLK SRC[busclk]
<6>[ 1.203062] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
<7>[ 1.203291] c0 pmu_debug: 0x00000900
<6>[ 1.213926] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
<6>[ 1.213969] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
<7>[ 1.214006] c0 i2s_txctrl: Turn Off - spr is no active
<6>[ 1.214050] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
<6>[ 1.214085] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
<6>[ 1.280895] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
<6>[ 1.281881] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
<6>[ 1.289664] c0 SRP: Driver successfully probed
<6>[ 1.289858] c0 ALSA device list:
<6>[ 1.289880] c0 #0: U1-YMU823
<6>[ 1.291100] c0 GACT probability NOT on
<6>[ 1.291130] c0 Mirror/redirect action on
<6>[ 1.291155] c0 u32 classifier
<6>[ 1.291172] c0 Actions configured
<6>[ 1.291197] c0 Netfilter messages via NETLINK v0.30.
<6>[ 1.291280] c0 nf_conntrack version 0.5.0 (12560 buckets, 50240 max)
<6>[ 1.292248] c0 ctnetlink v0.93: registering with nfnetlink.
<6>[ 1.292314] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 1.292352] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.292727] c0 xt_time: kernel timezone is -0000
<6>[ 1.294244] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.294448] c0 arp_tables: (C) 2002 David S. Miller
<6>[ 1.294531] c0 TCP cubic registered
<6>[ 1.295707] c0 NET: Registered protocol family 10
<6>[ 1.298375] c0 Mobile IPv6
<6>[ 1.298427] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.298702] c0 IPv6 over IPv4 tunneling driver
<6>[ 1.303258] c0 NET: Registered protocol family 17
<6>[ 1.303313] c0 NET: Registered protocol family 15
<6>[ 1.303439] c0 Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.303479] c0 Bluetooth: RFCOMM socket layer initialized
<6>[ 1.303510] c0 Bluetooth: RFCOMM ver 1.11
<6>[ 1.303534] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.303566] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.303818] c1 NET: Registered protocol family 35
<5>[ 1.304178] c1 Registering the dns_resolver key type
<6>[ 1.304240] c1 EXYNOS4210: Adaptive Support Voltage init
<6>[ 1.304486] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
<6>[ 1.305061] c0 EXYNOS4: HPM value = 17
<6>[ 1.305116] c0 EXYNOS4: IDS value = 16
<6>[ 1.305139] c0 <6>Support 1.2GHz
<6>[ 1.305159] c0 <6>ASV Group for This Exynos4210 is 0x40000003
<6>[ 1.305198] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<5>[ 1.305262] c0 Registering SWP/SWPB emulation handler
<6>[ 1.305299] c0 DVFS : VDD_ARM Voltage table set with 3 Group
<6>[ 1.305330] c0 max8997_set_arm_voltage_table
<6>[ 1.305361] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1275000, buck1_vol[1]=25
<6>[ 1.306566] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1175000, buck1_vol[2]=21
<6>[ 1.306787] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1075000, buck1_vol[3]=17
<6>[ 1.306983] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[4]=13
<6>[ 1.307170] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[5]=12
<6>[ 1.307364] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
<6>[ 1.307733] c0 DVFS : VDD_INT Voltage table set with 3 Group
<6>[ 1.308112] c0 exynos4_pm_hotplug_device_init: 0
<6>[ 1.308140] c0 EXYNOS4 PM-hotplug init function
<7>[ 1.308473] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x130/0x554):
<6>[ 1.308537] c0 s5p-ehci s5p-ehci: usb phy usage(2)
<6>[ 1.308681] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
<6>[ 1.309081] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
<6>[ 1.309235] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
<6>[ 1.315068] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
<6>[ 1.315171] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.315213] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.315254] c0 usb usb1: Product: S5P EHCI Host Controller
<6>[ 1.315286] c0 usb usb1: Manufacturer: Linux 3.0.64-CM-g526d694-dirty ehci_hcd
<6>[ 1.315328] c0 usb usb1: SerialNumber: s5p-ehci
<6>[ 1.315935] c0 hub 1-0:1.0: USB hub found
<6>[ 1.315973] c0 hub 1-0:1.0: 3 ports detected
<6>[ 1.316371] c0 CP not ready, Active State low
<6>[ 1.316520] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
<6>[ 1.316566] c0 @@@ get_refresh_interval = 0x2e
<6>[ 1.316593] c0 @@@ get_refresh_interval = 0x5d
<6>[ 1.316626] c0 ** temperature set value **
<6>[ 1.316648] c0 1st throttling stop_temp = 61, start_temp = 64
<6>[ 1.316682] c0 2nd throttling stop_temp = 87, start_tmep = 103
<6>[ 1.316715] c0 tripping temp = 110, s/w emergency temp = 120
<6>[ 1.316747] c0 mem throttling stop_temp = 80, start_temp = 85
<6>[ 1.316900] c0 exynos4210_tmu_init: triminfo = 0x0000004b, low 8bit = 0x4b, high 24 bit = 0x000000
<6>[ 1.316961] c0 THD_TEMP:0x6f: TRIG_LEV0: 0x03
<6>[ 1.316983] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
<6>[ 1.323014] c0 mmc1: new high speed SDHC card at address 0007
<6>[ 1.323417] c0 mmcblk1: mmc1:0007 SD16G 14.4 GiB
<6>[ 1.324903] c0 mmcblk1: p1
<6>[ 1.369708] c0 [MODEM_IF] init_modem
<3>[ 1.369746] c0 check phone active = 94
<6>[ 1.369776] c0 umts_modem_cfg_gpio done
<6>[ 1.369813] c0 modem_link_pm_config_gpio done
<3>[ 1.371111] c0 mif: modem_probe: modem_if
<6>[ 1.372079] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
<6>[ 1.372279] c0 wake enabled for irq 366
<6>[ 1.372308] c0 mif: create_modemctl_device: xmm6260 is created!!!
<6>[ 1.372778] c0 wake enabled for irq 361
<6>[ 1.373044] c0 usbcore: registered new interface driver cdc_modem
<6>[ 1.373093] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe462a800)
<6>[ 1.373136] c0 mif: hsic_create_link_device: usb : create_link_device DONE
<3>[ 1.373177] c0 mif: modem_probe: link created: usb
<6>[ 1.373605] c0 mif: create_io_device: Bood device = umts_boot0
<6>[ 1.382688] c1 mif: modem_probe: Complete!!!
<4>[ 1.384701] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
<6>[ 1.386031] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
<6>[ 1.386215] c0 otg host_probe start c08f0cfc
<7>[ 1.386434] c0 [TouchKey] i2c_touchkey_probe
<6>[ 1.386728] c0 input: sec_touchkey as /devices/platform/i2c-gpio.8/i2c-8/8-0020/input/input7
<6>[ 1.386994] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
<6>[ 1.440876] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
<6>[ 1.442186] c0 max8997-rtc max8997-rtc: setting system clock to 2014-09-08 17:43:16 UTC (1410198196)
<6>[ 1.442330] c0 ctrl->mem.size = 0x500000
<6>[ 1.442354] c0 ctrl->mem.base = 0x70f3c000
<6>[ 1.442471] c0
<6>[ 1.442484] c0
<6>[ 1.442496] c0
<6>[ 1.442508] c0 cam_cfg_gpio: pdev->id=0
<6>[ 1.442870] c1 FIMC0 registered successfully
<6>[ 1.442989] c1 ctrl->mem.size = 0x0
<6>[ 1.443012] c1 ctrl->mem.base = 0xffffffea
<6>[ 1.443322] c1 FIMC1 registered successfully
<6>[ 1.443443] c1 ctrl->mem.size = 0x1900000
<6>[ 1.443470] c1 ctrl->mem.base = 0x6f63c000
<6>[ 1.443767] c1 FIMC2 registered successfully
<6>[ 1.443910] c1 ctrl->mem.size = 0x700000
<6>[ 1.443935] c1 ctrl->mem.base = 0x6ef3c000
<6>[ 1.444225] c1 FIMC3 registered successfully
<6>[ 1.444507] c1 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
<6>[ 1.469633] c1 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
<6>[ 1.469740] c1 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
<6>[ 1.470471] c0 sec_bat_get_lpcharging_state: LP charging:0
<6>[ 1.472059] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
<6>[ 1.472533] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
<6>[ 1.472749] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
<6>[ 1.473455] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=885
<6>[ 1.473574] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
<6>[ 1.473760] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
<6>[ 1.473876] c1 sec-battery sec-battery: soc(68), vfocv(3921), vcell(3986), temp(29), charging(1), health(1), chg_adc(0)
<4>[ 1.476116] c0 Warning: unable to open an initial console.
<6>[ 1.477968] c0 Freeing init memory: 6384K
<7>[ 1.567089] c0 SELinux: 1024 avtab hash slots, 2852 rules.
<7>[ 1.569359] c0 SELinux: 1024 avtab hash slots, 2852 rules.
<7>[ 1.569420] c0 SELinux: 1 users, 2 roles, 296 types, 1 bools, 1 sens, 1024 cats
<7>[ 1.569483] c0 SELinux: 84 classes, 2852 rules
<7>[ 1.571290] c0 SELinux: Completing initialization.
<7>[ 1.571331] c0 SELinux: Setting up existing superblocks.
<7>[ 1.571401] c0 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 1.571476] c0 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 1.571618] c0 SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 1.571690] c0 SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 1.571770] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.571852] c0 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 1.572526] c0 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 1.572593] c0 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 1.572653] c0 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 1.572735] c0 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 1.572813] c0 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 1.572973] c0 SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
<7>[ 1.573044] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.573136] c0 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[ 1.684073] c0 type=1403 audit(1410198196.735:2): policy loaded auid=4294967295 ses=4294967295
<4>[ 1.684854] c0 SELinux: Loaded policy from /sepolicy
<4>[ 1.703201] c0 SELinux: Loaded file_contexts from /file_contexts
<5>[ 1.705520] c0 type=1404 audit(1410198196.760:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<6>[ 2.365157] c1 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
<6>[ 2.365776] c1 exynos4_handler_tmu_state: inform to init state to platform.
<6>[ 2.470444] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
<6>[ 2.471078] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=886
<6>[ 2.471173] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
<6>[ 2.471346] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
<6>[ 2.471447] c1 sec-battery sec-battery: soc(68), vfocv(3921), vcell(3986), temp(29), charging(1), health(1), chg_adc(0)
<6>[ 3.059282] c0 sec_bat_get_lpcharging_state: LP charging:0
<3>[ 3.060648] c0 init: /init.smdk4210.rc: 70: invalid command 'socket'
<3>[ 3.061068] c0 init: /init.smdk4210.rc: 342: ignored duplicate definition of service 'mdnsd'
<3>[ 3.061423] c0 init: could not import file 'init.gps.rc' from '/init.smdk4210.rc'
<3>[ 3.061558] c0 init: could not import file '/init.carrier.rc' from '/init.rc'
<4>[ 3.061985] c0 init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[ 3.063152] c0 init: do_chown: Could not access /selinux/booleans
<6>[ 3.131688] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
<3>[ 3.255525] c0 init: /dev/hw_random not found
<6>[ 3.255679] c0 keychord: using input dev max8997-muic for fevent
<6>[ 3.255729] c0 keychord: using input dev gpio-keys for fevent
<6>[ 3.255778] c0 keychord: using input dev sii9234_rcp for fevent
<3>[ 3.256036] c0 init: cannot open '/initlogo.rle'
<7>[ 3.275192] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 3.275608] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.277604] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.277834] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.278047] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.290160] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<3>[ 3.293102] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 3.300590] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 3.300665] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<6>[ 3.375087] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
<6>[ 3.375476] c0 normal: free cpufreq_limit & interrupt enable.
<6>[ 3.431547] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 3.431795] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[ 3.470675] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
<6>[ 3.471568] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=893
<6>[ 3.471743] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
<6>[ 3.471958] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
<6>[ 3.472132] c0 sec-battery sec-battery: soc(68), vfocv(3921), vcell(3986), temp(29), charging(1), health(1), chg_adc(0)
<6>[ 3.581104] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p7
<6>[ 3.599703] c0 MFC F/W loaded successfully (size: 376448)
<6>[ 3.676210] c1 e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 3.676417] c1 e2fsck: /dev/block/mmcblk0p7: clean, 28/6400 files, 2843/25600 blocks
<6>[ 3.690569] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
<7>[ 3.690756] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[ 3.720134] c0 max8997-muic max8997-muic: max8997_muic_init_detect
<6>[ 3.720229] c1 EXT4-fs (mmcblk0p1): recovery complete
<6>[ 3.720335] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 3.720514] c1 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
<6>[ 3.720683] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
<6>[ 3.720840] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
<6>[ 3.720989] c0 max8997-muic max8997-muic: attach_usb
<6>[ 3.721096] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
<3>[ 3.721419] c0 [TSP] mxt224_ta_probe
<3>[ 3.722202] c0 [TSP]TA_probe MXT224 T9 Byte7 is 70
<6>[ 3.722605] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
<6>[ 3.722861] c1 max8997-charger max8997-charger: max8997_disable_charging: disable charging
<6>[ 3.723512] c1 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
<6>[ 3.723786] c0 max8997-muic max8997-muic: switch_to_ap_usb
<6>[ 3.723908] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
<6>[ 3.895241] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p1
<6>[ 3.928159] c1 e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 3.928359] c1 e2fsck: /dev/block/mmcblk0p1: clean, 67/1280 files, 2195/5120 blocks
<6>[ 3.942982] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
<7>[ 3.943219] c1 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
<6>[ 3.969968] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 3.970275] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<6>[ 4.025151] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
<6>[ 4.130261] c0 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p10
<6>[ 4.173288] c0 e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 4.173492] c0 e2fsck: /dev/block/mmcblk0p10: clean, 10345/131072 files, 257386/524288 blocks
<6>[ 4.190269] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,journal_async_commit,errors=panic
<7>[ 4.190553] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<6>[ 4.218932] c0 EXT4-fs (mmcblk0p12): recovery complete
<6>[ 4.219070] c0 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: journal_async_commit
<7>[ 4.219269] c0 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<7>[ 4.356919] c0 SELinux: 1024 avtab hash slots, 2852 rules.
<7>[ 4.362626] c0 SELinux: 1024 avtab hash slots, 2852 rules.
<7>[ 4.362775] c0 SELinux: 1 users, 2 roles, 296 types, 1 bools, 1 sens, 1024 cats
<7>[ 4.362927] c0 SELinux: 84 classes, 2852 rules
<6>[ 4.470816] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
<6>[ 4.471730] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=894
<6>[ 4.471909] c0 sec-battery sec-battery: Time past : 0 secs
<6>[ 4.472037] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
<6>[ 4.472201] c0 sec-battery sec-battery: soc(68), vfocv(3921), vcell(3986), temp(29), charging(1), health(1), chg_adc(0)
<5>[ 4.562423] c0 type=1403 audit(1410198199.610:4): policy loaded auid=4294967295 ses=4294967295
<4>[ 4.563261] c0 SELinux: Loaded policy from /sepolicy
<4>[ 4.586493] c0 SELinux: Loaded file_contexts from /file_contexts
<4>[ 4.590823] c0 SELinux: Skipping restorecon_recursive(/data)
<4>[ 4.621918] c0 i2c-core: driver [Si4709] using legacy suspend method
<4>[ 4.621967] c0 i2c-core: driver [Si4709] using legacy resume method
<6>[ 4.637286] c0 mdnie mdnie: scenario_store :: value=0
<6>[ 4.637335] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
<6>[ 4.637451] c0 mdnie mdnie: mode_store :: value=1
<6>[ 4.637492] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
<3>[ 4.642492] c0 init: /dev/hw_random not found
<3>[ 4.673528] c1 healthd: wakealarm_init: timerfd_create failed
<6>[ 4.676429] c1 binder: 1852:1852 transaction failed 29189, size 0-0
<3>[ 4.703353] c0 init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
<3>[ 4.703451] c0 init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
<3>[ 4.703539] c0 init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
<3>[ 4.703837] c0 init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
<3>[ 4.703918] c0 init: property 'ro.model' doesn't exist while expanding '$ro.model'
<3>[ 4.703981] c0 init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
<3>[ 4.704061] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<3>[ 4.705230] c1 cbd: /check_debug_level: debug level=1, cp_debug=0
<6>[ 4.705549] c1 warning: `cbd' uses 32-bit capabilities (legacy support in use)
<3>[ 4.705621] c1 cbd: /main: Modem type = 1
<3>[ 4.705665] c1 cbd: /main: Boot link = 4
<3>[ 4.705702] c1 cbd: /main: Main link = 4
<3>[ 4.705810] c1 mif: misc_open: iod = umts_boot0
<6>[ 4.705850] c1 mif: usb_init_communication: 1865:cbd
<3>[ 4.710404] c0 init: service 'console' requires console
<7>[ 4.711953] c0 usb: enable_store enabled=0, !dev->enabled=1
<7>[ 4.712005] c0 usb: usb_gadget_disconnect
<7>[ 4.712270] c0 usb: functions_store buff=adb
<7>[ 4.712308] c0 usb: android_enable_function name=adb
<7>[ 4.712406] c0 usb: enable_store enabled=1, !dev->enabled=1
<7>[ 4.712823] c0 usb: enable_store vendor=18d1,product=d002,bcdDevice=226
<7>[ 4.712872] c0 ,Class=0,SubClass=0,Protocol=0
<7>[ 4.712904] c0 usb: enable_store next cmd : usb_add_config
<6>[ 4.718211] c0 adb_open
<7>[ 4.718500] c0 usb: android_bind_enabled_functions f:adb
<6>[ 4.718542] c0 adb_bind_config
<7>[ 4.718594] c0 usb: usb_gadget_connect
<7>[ 4.722187] c1 store_ehci_power: EHCI turns off
<6>[ 4.722233] c1 s5p-ehci s5p-ehci: remove, state 4
<6>[ 4.722314] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0x9c/0x148
<6>[ 4.747018] c1 s5p-ehci s5p-ehci: USB bus 1 deregistered
<6>[ 4.765708] c1 CP not ready, Active State low
<6>[ 4.817020] c1 mif: xmm6260_on: xmm6260_on()
<4>[ 5.123410] c0 Mali: mem_usage before 1859 : 8388608
<6>[ 5.171360] c0 s3cfb s3cfb.0: [fb0] Alloc dma: 0x7172a000, size: 0x002ee000
<6>[ 5.171427] c0 s3cfb s3cfb.0: [fb1] Alloc dma: 0x71a18000, size: 0x002ee000
<4>[ 5.171511] c0 s3c-fimc1: FIMC1 1 opened.
<3>[ 5.310541] c0 mif: misc_open: iod = umts_boot0
<6>[ 5.310568] c0 mif: usb_init_communication: 1858:rild
<4>[ 5.366681] c1 Mali: mem_usage before 1952 : 8650752
<7>[ 5.370242] c1 store_ehci_power: EHCI turns on
<7>[ 5.370293] c1 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x130/0x554):
<6>[ 5.370336] c1 [MODEM_IF]Slave Wake
<6>[ 5.370363] c1 mif: set hsic lpa phy init: slave wake-up (1)
<6>[ 5.370403] c1 s5p-ehci s5p-ehci: usb phy usage(2)
<6>[ 5.370583] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
<7>[ 5.370696] c1 SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
<6>[ 5.375957] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
<6>[ 5.376096] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
<6>[ 5.390079] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
<6>[ 5.390199] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 5.390240] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.390281] c1 usb usb1: Product: S5P EHCI Host Controller
<6>[ 5.390314] c1 usb usb1: Manufacturer: Linux 3.0.64-CM-g526d694-dirty ehci_hcd
<6>[ 5.390354] c1 usb usb1: SerialNumber: s5p-ehci
<6>[ 5.395348] c1 hub 1-0:1.0: USB hub found
<6>[ 5.395402] c1 hub 1-0:1.0: 3 ports detected
<3>[ 5.405198] c1 [MODEM_IF]Active States =1, s5p-ehci
<6>[ 5.405266] c1 mif: link_pm_ioctl: 6f33
<3>[ 5.405314] c1 cbd: /hsic_xmit_boot: check [BOOTROM] link connected = [0]
<6>[ 5.470538] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
<6>[ 5.471061] c0 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=896
<6>[ 5.471103] c0 sec-battery sec-battery: Time past : 1 secs
<6>[ 5.471134] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
<6>[ 5.471173] c0 sec-battery sec-battery: soc(68), vfocv(3921), vcell(3986), temp(28), charging(1), health(1), chg_adc(0)
<6>[ 5.533371] c0 mc1n2 6-003a: write 0 = 4b
<6>[ 5.534605] c0 mc1n2 6-003a: write 0 = 4b4b
<6>[ 5.535188] c0 mc1n2 6-003a: write 0 = 4bcb
<6>[ 5.535783] c0 mc1n2 6-003a: write 0 = cbcb
<6>[ 5.537338] c0 mc1n2 6-003a: write 1 = 4b
<6>[ 5.537947] c0 mc1n2 6-003a: write 1 = 4b4b
<6>[ 5.538557] c0 mc1n2 6-003a: write 1 = 4bcb
<6>[ 5.539449] c0 mc1n2 6-003a: write 1 = cbcb
<6>[ 5.540402] c0 mc1n2 6-003a: write 3 = 4b
<6>[ 5.540952] c0 mc1n2 6-003a: write 3 = 4b4b
<6>[ 5.541506] c0 mc1n2 6-003a: write 3 = 4bcb
<6>[ 5.542697] c0 mc1n2 6-003a: write 3 = cbcb
<6>[ 5.543255] c0 mc1n2 6-003a: write 4 = 4b
<6>[ 5.543801] c0 mc1n2 6-003a: write 4 = 4b4b
<6>[ 5.544355] c0 mc1n2 6-003a: write 4 = 4bcb
<6>[ 5.545712] c0 mc1n2 6-003a: write 4 = cbcb
<6>[ 5.548219] c0 mc1n2 6-003a: write 5 = 4b
<6>[ 5.549802] c0 mc1n2 6-003a: write 5 = 4b4b
<6>[ 5.550427] c0 mc1n2 6-003a: write 5 = 4bcb
<6>[ 5.551306] c0 mc1n2 6-003a: write 5 = cbcb
<6>[ 5.552370] c0 mc1n2 6-003a: write 7 = 4b
<6>[ 5.552983] c0 mc1n2 6-003a: write 7 = 4b4b
<6>[ 5.553568] c0 mc1n2 6-003a: write 7 = 4bcb
<6>[ 5.554368] c0 mc1n2 6-003a: write 7 = cbcb
<6>[ 5.555293] c0 mc1n2 6-003a: write 8 = 4b
<6>[ 5.555842] c0 mc1n2 6-003a: write 8 = 4b4b
<6>[ 5.556399] c0 mc1n2 6-003a: write 8 = 4bcb
<6>[ 5.556946] c0 mc1n2 6-003a: write 8 = cbcb
<6>[ 5.558273] c0 mc1n2 6-003a: write 9 = 4b
<6>[ 5.558821] c0 mc1n2 6-003a: write 9 = 4b4b
<6>[ 5.559377] c0 mc1n2 6-003a: write 9 = 4bcb
<6>[ 5.559923] c0 mc1n2 6-003a: write 9 = cbcb
<6>[ 5.561137] c0 mc1n2 6-003a: write b = 4b
<6>[ 5.561723] c0 mc1n2 6-003a: write b = 4b4b
<6>[ 5.562342] c0 mc1n2 6-003a: write b = 4bcb
<6>[ 5.563496] c0 mc1n2 6-003a: write b = cbcb
<6>[ 5.564468] c0 mc1n2 6-003a: write d = 4b
<6>[ 5.565057] c0 mc1n2 6-003a: write d = 4b4b
<6>[ 5.565784] c0 mc1n2 6-003a: write d = 4bcb
<6>[ 5.566532] c0 mc1n2 6-003a: write d = cbcb
<6>[ 5.567263] c0 mc1n2 6-003a: write e = 4b
<6>[ 5.567812] c0 mc1n2 6-003a: write e = 4b4b
<6>[ 5.568521] c0 mc1n2 6-003a: write e = 4bcb
<6>[ 5.569274] c0 mc1n2 6-003a: write e = cbcb
<6>[ 5.570109] c0 mc1n2 6-003a: write f = 4b
<6>[ 5.570691] c0 mc1n2 6-003a: write f = 4b4b
<6>[ 5.571312] c0 mc1n2 6-003a: write f = 4bcb
<6>[ 5.572379] c0 mc1n2 6-003a: write f = cbcb
<6>[ 5.573094] c0 mc1n2 6-003a: write 10 = 4b
<6>[ 5.573827] c0 mc1n2 6-003a: write 10 = 4b4b
<6>[ 5.574400] c0 mc1n2 6-003a: write 10 = 4bcb
<6>[ 5.575662] c0 mc1n2 6-003a: write 10 = cbcb
<6>[ 5.576687] c0 mc1n2 6-003a: write 11 = 13
<6>[ 5.577250] c0 mc1n2 6-003a: write 11 = 1313
<6>[ 5.577838] c0 mc1n2 6-003a: write 11 = 1393
<6>[ 5.579147] c0 mc1n2 6-003a: write 11 = 9393
<6>[ 5.580793] c0 mc1n2 6-003a: write 17 = 1a
<6>[ 5.581847] c0 mc1n2 6-003a: write 17 = 1a1a
<6>[ 5.582952] c0 mc1n2 6-003a: write 17 = 1a9a
<6>[ 5.583507] c0 mc1n2 6-003a: write 17 = 9a9a
<6>[ 5.584165] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
<6>[ 5.584205] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
<6>[ 5.595764] c0 G:P:DmaAddr=@64640000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
<6>[ 5.595929] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
<6>[ 5.595970] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
<4>[ 5.673864] c0 Mali: = regulator_set_voltage: 900000, 900000
<4>[ 5.675748] c0 Mali: Mali frequency 200
<6>[ 5.677998] c1 healthd: battery l=68 v=3986 t=28.0 h=2 st=2 c=0 chg=u
<6>[ 5.705121] c0 usb 1-2: new high speed USB device number 2 using s5p-ehci
<4>[ 5.836874] c1 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
<6>[ 5.836926] c1 usb 1-2: New USB device found, idVendor=058b, idProduct=0041
<6>[ 5.836959] c1 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[ 5.847102] c0 mif: if_usb_probe: usbdev = 0xe436b400
<6>[ 5.847141] c0 mif: if_usb_set_pipe: set 0
<6>[ 5.847181] c0 mif: if_usb_probe: devdata usbdev = 0xe436b400
<6>[ 5.847257] c0 mif: if_usb_probe: successfully done
<6>[ 5.905467] c1 mif: link_pm_ioctl: 6f33
<3>[ 5.905515] c1 cbd: /hsic_xmit_boot: check [BOOTROM] link connected = [1]
<6>[ 6.006823] c1 mif: link_pm_ioctl: 6f33
<4>[ 6.175578] c0 Mali: Mali frequency 133
<4>[ 6.175608] c0 Mali: = regulator_set_voltage: 950000, 950000
<3>[ 9.289344] c1 hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
<6>[ 9.289407] c1 usb 1-2: USB disconnect, device number 2 by hub_thread+0x564/0x1294
<6>[ 9.289542] c1 mif: if_usb_disconnect:
<6>[ 9.289691] c1 mif: if_usb_disconnect: put dev 0xe436b400
<6>[ 9.290262] c1 mif: if_usb_disconnect:
<6>[ 9.313198] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
<3>[ 9.313270] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
<3>[ 9.313324] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
<6>[ 9.313390] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
<3>[ 9.313426] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
<3>[ 9.313465] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
<6>[ 9.517646] c1 mif: link_pm_ioctl: 6f32
<6>[ 9.517677] c1 mif: link_pm_ioctl: 6f32
<6>[ 9.517702] c1 mif: link_pm_ioctl: 6f30
<7>[ 9.517839] c1 store_ehci_power: EHCI turns off
<6>[ 9.517866] c1 s5p-ehci s5p-ehci: remove, state 1
<6>[ 9.517923] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0x9c/0x148
<6>[ 9.520056] c1 usb 1-2: new high speed USB device number 3 using s5p-ehci
<3>[ 9.520140] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
<3>[ 9.520170] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
<3>[ 9.520216] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
<3>[ 9.520246] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
<3>[ 9.520282] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
<3>[ 9.520315] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
<3>[ 9.520352] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
<3>[ 9.520383] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
<3>[ 9.520419] c1 hub 1-0:1.0: unable to enumerate USB device on port 2
<3>[ 9.520450] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
<6>[ 9.552196] c1 s5p-ehci s5p-ehci: USB bus 1 deregistered
<3>[ 9.570568] c1 [MODEM_IF]Active States =0, s5p-ehci
<6>[ 9.620729] c1 mif: link_pm_ioctl: 6f31
<6>[ 9.620800] c1 mif: link_pm_ioctl: 6f32
<6>[ 10.121214] c1 mif: link_pm_ioctl: 6f32
<6>[ 10.121403] c1 mif: link_pm_ioctl: 6f30
<7>[ 10.122122] c1 store_ehci_power: EHCI turns on
<7>[ 10.122380] c1 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x130/0x554):
<6>[ 10.122662] c1 mif: set hsic lpa phy init: slave wake-up (1)
<6>[ 10.122779] c1 s5p-ehci s5p-ehci: usb phy usage(2)
<6>[ 10.123050] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
<7>[ 10.123302] c1 SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
<6>[ 10.125263] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
<6>[ 10.125557] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
<6>[ 10.135125] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
<6>[ 10.135357] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 10.135443] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 10.135532] c1 usb usb1: Product: S5P EHCI Host Controller
<6>[ 10.135631] c1 usb usb1: Manufacturer: Linux 3.0.64-CM-g526d694-dirty ehci_hcd
<6>[ 10.135713] c1 usb usb1: SerialNumber: s5p-ehci
<6>[ 10.139208] c1 hub 1-0:1.0: USB hub found
<6>[ 10.139295] c1 hub 1-0:1.0: 3 ports detected
<3>[ 10.140275] c1 [MODEM_IF]Active States =1, s5p-ehci
<6>[ 10.140426] c1 mif: link_pm_ioctl: 6f31
<6>[ 10.140480] c1 mif: link_pm_ioctl: 6f33
<6>[ 10.379688] c0 wake enabled for irq 354
<6>[ 10.383351] c0 input: compass_sensor as /devices/virtual/input/input8
<6>[ 10.385002] c0 k3dh_open: is called.
<6>[ 10.445122] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
<6>[ 10.446754] c0 wake disabled for irq 354
<6>[ 10.586204] c1 usb 1-2: New USB device found, idVendor=1519, idProduct=0020
<6>[ 10.586270] c1 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 10.586329] c1 usb 1-2: Product: HSIC Device
<6>[ 10.586364] c1 usb 1-2: Manufacturer: Comneon
<6>[ 10.586401] c1 usb 1-2: SerialNumber: 0123456789
<6>[ 10.603851] c1 mif: if_usb_probe: usbdev = 0xe2d2b800
<6>[ 10.603904] c1 mif: if_usb_set_pipe: set 0
<6>[ 10.603950] c1 mif: if_usb_probe: devdata usbdev = 0xe2d2b800
<6>[ 10.604095] c1 mif: if_usb_probe: successfully done
<6>[ 10.607566] c1 mif: if_usb_probe: usbdev = 0xe2d2b800
<6>[ 10.607622] c1 mif: if_usb_set_pipe: set 1
<6>[ 10.607665] c1 mif: if_usb_probe: devdata usbdev = 0xe2d2b800
<6>[ 10.607808] c1 mif: if_usb_probe: successfully done
<6>[ 10.611309] c1 mif: if_usb_probe: usbdev = 0xe2d2b800
<6>[ 10.611356] c1 mif: if_usb_set_pipe: set 2
<6>[ 10.611392] c1 mif: if_usb_probe: devdata usbdev = 0xe2d2b800
<6>[ 10.611513] c1 mif: if_usb_probe: successfully done
<6>[ 10.613564] c1 mif: if_usb_probe: usbdev = 0xe2d2b800
<6>[ 10.613610] c1 mif: if_usb_set_pipe: set 3
<6>[ 10.613645] c1 mif: if_usb_probe: devdata usbdev = 0xe2d2b800
<3>[ 10.613780] c1 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x38c/0x480
<3>[ 10.613842] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 4)
<3>[ 10.613901] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 4)
<6>[ 10.613958] c1 mif: if_usb_probe: successfully done
<6>[ 10.640726] c1 mif: link_pm_ioctl: 6f33
<3>[ 10.640832] c1 mif: misc_release: iod = umts_boot0
<3>[ 10.653785] c1 cbd: /main: Boot up process done!!!
<3>[ 10.653859] c1 cbd: /status_loop: CP status_loop start (modem = 1)
<3>[ 10.656047] c1 mif: misc_open: iod = umts_boot0
<6>[ 10.656117] c1 mif: usb_init_communication: 1865:cbd
<3>[ 10.657683] c1 cbd: /status_loop: Wait event from modem 1
<6>[ 11.042557] c0 max17042 9-0036: max17042_get_soc : soc(4335)
<6>[ 11.042602] c0 max17042_need_soc_recal: HW(0xe)
<6>[ 11.042638] c0 max17042 9-0036: max17042_get_soc : use raw (67), soc (68)
<6>[ 11.100098] c1 mif: link_pm_runtime_start: rpm_status: 0
<6>[ 11.100159] c1 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
<3>[ 11.311723] c0 mif: misc_release: iod = umts_boot0
<3>[ 11.314127] c0 mif: misc_open: iod = umts_ipc0
<6>[ 11.314209] c0 mif: usb_init_communication: 1858:rild
<6>[ 11.340717] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 11.390079] c1 mif: usb_port_resume: 1283, 4
<3>[ 11.390865] c0 mif: start_ipc: send 'a'
<3>[ 11.390981] c0 mif: misc_open: iod = umts_rfs0
<6>[ 11.391013] c0 mif: usb_init_communication: 1858:rild
<6>[ 11.392967] c1 mif: IPC-RX(129): 7f 0a 00 00 07 00 ff ff 01 01 03 7e 7f 1a 00 00 ...
<6>[ 11.395809] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 01 00 0a 0c 05 01 7e
<6>[ 11.480353] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
<6>[ 11.602361] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 11.602417] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 11.645695] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 11.695090] c0 mif: usb_port_resume: 1283, 4
<6>[ 11.902286] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 11.902359] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 11.945704] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 11.995070] c0 mif: usb_port_resume: 1283, 4
<6>[ 12.202276] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 12.202365] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 12.245714] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 12.295281] c0 mif: usb_port_resume: 1283, 4
<6>[ 12.502300] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 12.502385] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 12.545699] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 12.595615] c0 mif: usb_port_resume: 1283, 4
<6>[ 12.802532] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 12.802633] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 12.846121] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 12.895096] c0 mif: usb_port_resume: 1283, 4
<6>[ 13.102418] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 13.103160] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 13.145993] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 13.195075] c0 mif: usb_port_resume: 1283, 4
<6>[ 13.402413] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 13.402573] c0 mif: link_pm_runtime_work: rpm_states=3
<6>[ 13.445686] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 13.495072] c0 mif: usb_port_resume: 1283, 4
<7>[ 15.760111] c0 usb: usb_ready udc_enable=0
<6>[ 17.760099] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
<6>[ 17.760167] c0 max8997-muic max8997-muic: max8997_muic_usb_detect: usb attach
<6>[ 17.760239] c0 otg max8997_muic_usb_cb: usb mode=1
<6>[ 17.760283] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
<7>[ 17.760347] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
<7>[ 17.760391] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
<7>[ 17.760549] c0 usb: s5p_usb_phy0_tune read original tune
<7>[ 17.760599] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
<7>[ 17.760651] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
<7>[ 17.760694] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
<7>[ 17.760762] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
<7>[ 17.760816] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
<7>[ 17.986279] c0 usb: GET_DES
<7>[ 17.986382] c0 usb: android_work config= (null),connected=1,sw_connected=0
<7>[ 17.989533] c0 usb: android_work sent uevent USB_STATE=CONNECTED
<7>[ 18.082146] c0 usb: GET_DES
<6>[ 18.083278] c0 android_usb gadget: high speed config #1: android
<7>[ 18.083345] c0 usb: SET_CON
<7>[ 18.083425] c0 usb: android_work config=c0ef2ab0,connected=1,sw_connected=1
<7>[ 18.084036] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
<6>[ 21.062621] c0 max17042 9-0036: max17042_get_soc : soc(4335)
<6>[ 21.062696] c0 max17042_need_soc_recal: HW(0xe)
<6>[ 21.062750] c0 max17042 9-0036: max17042_get_soc : use raw (67), soc (68)
<6>[ 21.500403] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
<6>[ 23.547211] c0 healthd: battery l=68 v=3986 t=28.0 h=2 st=2 c=0 chg=u
<6>[ 23.561882] c1 request_suspend_state: wakeup (3->0) at 23561865429 (2014-09-08 17:43:38.615613303 UTC)
<6>[ 23.618136] c1 k3dh_ioctl: opened = 0, enable = 1
<3>[ 23.707893] c0 [TSP] sec_touchscreen_enable
<6>[ 23.708387] c0 [TSP] Calibration End!!!!!!
<3>[ 23.708414] c0 [TSP] +mxt224_optical_gain()
<3>[ 23.925454] c0 [TSP] -mxt224_optical_gain()
<6>[ 23.926046] c0 [TSP] Calibration End!!!!!!
<7>[ 24.730792] c0 usb: state_show buf=CONFIGURED
<6>[ 24.731975] c0 acc_open
<6>[ 24.731999] c0 acc_release
<4>[ 25.050900] c0 wifi_set_power = 1
<6>[ 25.050921] c0 ------------------------------------------------
<6>[ 25.050973] c0 ------------------------------------------------
<6>[ 25.051001] c0 brcm_wlan_power Enter: power on
<6>[ 25.051023] c0 gpio_table = [2]
<7>[ 25.051289] c0 WLAN: GPIO_WLAN_EN = 1
<4>[ 25.255166] c0 wifi_set_carddetect = 1
<6>[ 25.255338] c0 gpio_table = [6]
<6>[ 25.255927] c0 Test logs pdev : c0ed1cf0 s3c_device_hsmmc3 c0ed1cf0
<6>[ 25.256019] c0 Test logs notify_func = hsmmc3_notify_func: c09b4dd0
<6>[ 25.256113] c0 mmc2: card inserted.
<6>[ 25.485524] c0 mmc2: cmd 52 command timeout error
<6>[ 25.486033] c0 mmc2: cmd 52 command timeout error
<6>[ 25.490112] c0 mmc2: cmd 8 command timeout error
<4>[ 25.505879] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 25.508995] c0 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
<6>[ 25.602307] c0 mmc2: new high speed SDIO card at address 0001
<6>[ 25.760182] c0 max8997-muic max8997-muic: max8997_muic_mhl_detect
<4>[ 25.773558] c1 alloc static buf at e4200000!
<4>[ 25.775557] c1 dhdsdio_probe : no mutex held. set lock
<4>[ 25.777151] c1 F1 signature read @0x18000000=0x16834330
<4>[ 25.810525] c1 DHD: dongle ram size is set to 294912(orig 294912) at 0x0
<4>[ 25.812030] c1 can't alloc section 7
<4>[ 25.818187] c1 wl_create_event_handler thr:93c created
<6>[ 25.818274] c0 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe2ad9d98
<4>[ 25.856479] c1 p2p0: P2P Interface Registered
<4>[ 25.867548] c1 dhd_attach thr:943 created
<4>[ 25.867857] c1 dhd_attach thr:944 created
<4>[ 25.871638] c1 dhd_attach thr:945 created
<4>[ 26.070979] c0 PR85623WAR in place
<4>[ 26.085176] c1 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 26.219665] c0 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 26.226388] c0 wake enabled for irq 373
<4>[ 26.231589] c1 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 26.231623] c1 dhd_check_module_cid: CIS reading failed, err=-23
<4>[ 26.238378] c1 Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=04:36:78
<4>[ 26.253732] c1 dhd_wl_ioctl: WLC_SET_VAR: lpc, ret = -23
<4>[ 26.253762] c1 dhd_preinit_ioctls Set lpc failed -23
<4>[ 26.271545] c1 POWER_VAL = 1
<4>[ 26.283119] c1 dhd_wl_ioctl: WLC_SET_VAR: buf_key_b4_m4, ret = -23
<4>[ 26.286090] c0 dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23
<4>[ 26.288336] c1 Firmware version = wl0: Nov 15 2012 16:26:19 version 5.90.100.410 (JB) (WFD)
<0>[ 26.412257] c1 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf013a2c
<0>[ 26.412315] c1
<4>[ 26.412334] c1 Backtrace:
<4>[ 26.412382] c1 [<c064e5b8>] (dump_backtrace+0x0/0x10c) from [<c0b91e6c>] (dump_stack+0x18/0x1c)
<4>[ 26.412439] c1 r6:e211e820 r5:c0ed4760 r4:c0f5c940 r3:271aed5c
<4>[ 26.412496] c1 [<c0b91e54>] (dump_stack+0x0/0x1c) from [<c0b92204>] (panic+0x80/0x1ac)
<4>[ 26.412561] c1 [<c0b92184>] (panic+0x0/0x1ac) from [<c0684be0>] (init_oops_id+0x0/0x58)
<4>[ 26.412613] c1 r3:271aed5c r2:271aed00 r1:bf013a2c r0:c0cb8880
<4>[ 26.412663] c1 r7:e273bc32
<4>[ 26.412742] c1 [<c0684bc4>] (__stack_chk_fail+0x0/0x1c) from [<bf013a2c>] (dhd_write_macaddr+0x2e4/0x310 [dhd])
<4>[ 26.412864] c1 [<bf013748>] (dhd_write_macaddr+0x0/0x310 [dhd]) from [<bf01a554>] (dhd_bus_start+0x1a4/0x2e0 [dhd])
<4>[ 26.412985] c1 [<bf01a3b0>] (dhd_bus_start+0x0/0x2e0 [dhd]) from [<bf020558>] (dhdsdio_probe+0x4a4/0x72c [dhd])
<4>[ 26.413097] c1 [<bf0200b4>] (dhdsdio_probe+0x0/0x72c [dhd]) from [<bf00c0ec>] (bcmsdh_probe+0xf8/0x150 [dhd])
<4>[ 26.413206] c1 [<bf00bff4>] (bcmsdh_probe+0x0/0x150 [dhd]) from [<bf00e038>] (bcmsdh_sdmmc_probe+0x54/0xbc [dhd])
<4>[ 26.413304] c1 [<bf00dfe4>] (bcmsdh_sdmmc_probe+0x0/0xbc [dhd]) from [<c09a7fe8>] (sdio_bus_probe+0xfc/0x108)
<4>[ 26.413368] c1 r5:e2d97000 r4:e2d97008
<4>[ 26.413414] c1 [<c09a7eec>] (sdio_bus_probe+0x0/0x108) from [<c0896764>] (driver_probe_device+0x94/0x1a8)
<4>[ 26.413474] c1 r8:00000000 r7:bf067414 r6:e2d9703c r5:c0f6ddb8 r4:e2d97008
<4>[ 26.413531] c1 r3:c09a7eec
<4>[ 26.413563] c1 [<c08966d0>] (driver_probe_device+0x0/0x1a8) from [<c089690c>] (__driver_attach+0x94/0x98)
<4>[ 26.413624] c1 r7:e2e631e0 r6:e2d9703c r5:bf067414 r4:e2d97008
<4>[ 26.413683] c1 [<c0896878>] (__driver_attach+0x0/0x98) from [<c0895678>] (bus_for_each_dev+0x4c/0x94)
<4>[ 26.413742] c1 r6:c0896878 r5:bf067414 r4:00000000 r3:c0896878
<4>[ 26.413799] c1 [<c089562c>] (bus_for_each_dev+0x0/0x94) from [<c0896428>] (driver_attach+0x24/0x28)
<4>[ 26.413857] c1 r6:c0f02af0 r5:bf067414 r4:bf067414
<4>[ 26.413904] c1 [<c0896404>] (driver_attach+0x0/0x28) from [<c08960c8>] (bus_add_driver+0x180/0x250)
<4>[ 26.413970] c1 [<c0895f48>] (bus_add_driver+0x0/0x250) from [<c0896e14>] (driver_register+0x80/0x150)
<4>[ 26.414037] c1 [<c0896d94>] (driver_register+0x0/0x150) from [<c09a8128>] (sdio_register_driver+0x2c/0x30)
<4>[ 26.414131] c1 [<c09a80fc>] (sdio_register_driver+0x0/0x30) from [<bf00e250>] (sdio_function_init+0x3c/0x8c [dhd])
<4>[ 26.414244] c1 [<bf00e214>] (sdio_function_init+0x0/0x8c [dhd]) from [<bf00c19c>] (bcmsdh_register+0x1c/0x24 [dhd])
<4>[ 26.414311] c1 r5:00000004 r4:bf06a3c4
<4>[ 26.414398] c1 [<bf00c180>] (bcmsdh_register+0x0/0x24 [dhd]) from [<bf027990>] (dhd_bus_register+0x24/0x48 [dhd])
<4>[ 26.414515] c1 [<bf02796c>] (dhd_bus_register+0x0/0x48 [dhd]) from [<bf07618c>] (init_module+0x18c/0x284 [dhd])
<4>[ 26.414610] c1 [<bf076000>] (init_module+0x0/0x284 [dhd]) from [<c06448f8>] (do_one_initcall+0x128/0x1a8)
<4>[ 26.414683] c1 [<c06447d0>] (do_one_initcall+0x0/0x1a8) from [<c06b9710>] (sys_init_module+0xdf8/0x1b1c)
<4>[ 26.414756] c1 [<c06b8918>] (sys_init_module+0x0/0x1b1c) from [<c064a8c0>] (ret_fast_syscall+0x0/0x30)
<2>[ 26.414861] c0 CPU0: stopping
<4>[ 26.414886] c0 Backtrace:
<4>[ 26.414920] c0 [<c064e5b8>] (dump_backtrace+0x0/0x10c) from [<c0b91e6c>] (dump_stack+0x18/0x1c)
<4>[ 26.414977] c0 r6:c0d54000 r5:c0eb5d08 r4:00000006 r3:271aed5c
<4>[ 26.415039] c0 [<c0b91e54>] (dump_stack+0x0/0x1c) from [<c06444bc>] (do_IPI+0x258/0x29c)
<4>[ 26.415102] c0 [<c0644264>] (do_IPI+0x0/0x29c) from [<c064a340>] (__irq_svc+0x80/0x130)
<4>[ 26.415156] c0 Exception stack(0xc0d55ef0 to 0xc0d55f38)
<4>[ 26.415197] c0 5ee0: 3b9ac9ff 540deacd 01c99e53 00072679
<4>[ 26.415258] c0 5f00: c0f5a468 00000000 c0d54000 00000000 c1b540a8 412fc091 00000000 c0d55f64
<4>[ 26.415317] c0 5f20: 540deacd c0d55f38 c06aa768 c065bd78 20000013 ffffffff
<4>[ 26.415380] c0 [<c065bd3c>] (exynos4_enter_idle+0x0/0x174) from [<c099a890>] (cpuidle_idle_call+0xa4/0x120)
<4>[ 26.415442] c0 r7:00000000 r6:00000001 r5:c0f815ac r4:c1b540b8
<4>[ 26.415498] c0 [<c099a7ec>] (cpuidle_idle_call+0x0/0x120) from [<c064bd40>] (cpu_idle+0xc4/0x100)
<4>[ 26.415554] c0 r8:4000406a r7:c0ba09a8 r6:c0f59ec4 r5:c0ebd8c4 r4:c0d54000
<4>[ 26.415610] c0 r3:c099a7ec
<4>[ 26.415641] c0 [<c064bc7c>] (cpu_idle+0x0/0x100) from [<c0b83238>] (rest_init+0x8c/0xa4)
<4>[ 26.415694] c0 r7:c1b51180 r6:c0f59e00 r5:00000002 r4:c0d54000
<4>[ 26.415752] c0 [<c0b831ac>] (rest_init+0x0/0xa4) from [<c00089c4>] (start_kernel+0x2dc/0x330)
<4>[ 26.415807] c0 r5:c063d944 r4:c0eb5d34
<4>[ 26.415845] c0 [<c00086e8>] (start_kernel+0x0/0x330) from [<40008044>] (0x40008044)
<6>[ 26.415907] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
<0>[ 26.415960] c1 Rebooting in 1 seconds..
<0>[ 27.414814] c1 sec_reboot (104, (null))
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment