Skip to content

Instantly share code, notes, and snippets.

@OliverUv

OliverUv/wirelessinfo.txt

Created February 18, 2014 21:53
Show Gist options
  • Save OliverUv/9081081 to your computer and use it in GitHub Desktop.
Save OliverUv/9081081 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
wirelessinfo.txt
Dell Inspiron 1764, running Linux Mint with KDE.
While using old kernel, attempting to use the wireless card would cause an instant system crash.
Upgraded kernel, ran linux mint's restricted driver installation tool, then installed firmware-b43-lpphy-installer via apt-get.
After upgrading the kernel, between each step, the network setting's wireless tab has been grayed out.
systemsettings -> Driver Manager says:
Broadcom Corporation: BBCM4312 802.11b/g LP-PHY
This device is using an alternative driver.
bcmwl-kernel-source (version 6.20.155.1+bdcom-0ubuntu6)
Broadcom 802.11 Linux STA wireless driver source
cat /etc/os-release
NAME="Ubuntu"
VERSION="13.04, Raring Ringtail"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 13.04"
VERSION_ID="13.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
uname -a
Linux amitofo 3.13.3-031303-generic #201402131842 SMP Thu Feb 13 23:43:57 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
lscpi -vnn
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
inxi -N
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.3-031303-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201402131842 SMP Thu Feb 13 23:43:57 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.3-031303-generic root=UUID=1d0e79c2-1c89-48e3-8711-b846e3292d48 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb3e9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb3ea000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb470000-0x00000000bb4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb4f1000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb77dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb77e000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7e2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb7e3000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0704000-0x00000000f0704fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron 1764/0TKV96, BIOS A01 11/06/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7280-0x000f728f] mapped at [ffff8800000f7280]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[ 0.000000] [mem 0x134000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[ 0.000000] [mem 0x100000000-0x133ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb282000-0xbb3e9fff]
[ 0.000000] [mem 0xbb282000-0xbb3e9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] [mem 0xbb40f000-0xbb46efff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] [mem 0xbb70f000-0xbb716fff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb77dfff]
[ 0.000000] [mem 0xbb71f000-0xbb77dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb79f000-0xbb7e2fff]
[ 0.000000] [mem 0xbb79f000-0xbb7e2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] [mem 0xbb7ff000-0xbb7fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x34046000-0x3601afff]
[ 0.000000] ACPI: RSDP 00000000000f71a0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bb7f4d39 000064 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bb7e5000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bb7e6000 009DBD (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000bb79bfc0 000040
[ 0.000000] ACPI: HPET 00000000bb7fecfa 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bb7fed32 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000bb7fed6e 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bb7fedf2 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bb7fee1a 000176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 00000000bb7fef90 000070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000bb7e4000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[ 0.000000] NODE_DATA [mem 0x137ff8000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb27bfff]
[ 0.000000] node 0: [mem 0xbb282000-0xbb3e9fff]
[ 0.000000] node 0: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] node 0: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] node 0: [mem 0xbb71f000-0xbb77dfff]
[ 0.000000] node 0: [mem 0xbb79f000-0xbb7e2fff]
[ 0.000000] node 0: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x137ffffff]
[ 0.000000] On node 0 totalpages: 996491
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11924 pages used for memmap
[ 0.000000] DMA32 zone: 763120 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3ea000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb46ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb470000-0xbb4f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb4f1000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77e000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb7e3000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0703fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0704000-0xf0704fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0705000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880137c00000 s86400 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 980898
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.3-031303-generic root=UUID=1d0e79c2-1c89-48e3-8711-b846e3292d48 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3806728K/3985964K available (7493K kernel code, 1129K rwdata, 3504K rodata, 1348K init, 1436K bss, 179236K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2261.135 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.27 BogoMIPS (lpj=9044540)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000048] AppArmor: AppArmor initialized
[ 0.000049] Yama: becoming mindful.
[ 0.000393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001347] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001752] Mount-cache hash table entries: 256
[ 0.001946] Initializing cgroup subsys memory
[ 0.001953] Initializing cgroup subsys devices
[ 0.001955] Initializing cgroup subsys freezer
[ 0.001956] Initializing cgroup subsys blkio
[ 0.001958] Initializing cgroup subsys perf_event
[ 0.001960] Initializing cgroup subsys hugetlb
[ 0.001983] CPU: Physical Processor ID: 0
[ 0.001985] CPU: Processor Core ID: 0
[ 0.001990] mce: CPU supports 9 MCE banks
[ 0.002000] CPU0: Thermal monitoring handled by SMI
[ 0.002010] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002010] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002010] tlb_flushall_shift: 6
[ 0.002109] Freeing SMP alternatives memory: 28K (ffffffff81e6d000 - ffffffff81e74000)
[ 0.003362] ACPI: Core revision 20131115
[ 0.007797] ACPI: All ACPI Tables successfully acquired
[ 0.022045] ftrace: allocating 31054 entries in 122 pages
[ 0.038755] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078454] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
[ 0.185831] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.185838] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.185841] ... version: 3
[ 0.185842] ... bit width: 48
[ 0.185843] ... generic registers: 4
[ 0.185844] ... value mask: 0000ffffffffffff
[ 0.185845] ... max period: 000000007fffffff
[ 0.185846] ... fixed-purpose events: 3
[ 0.185847] ... event mask: 000000070000000f
[ 0.187592] x86: Booting SMP configuration:
[ 0.198650] CPU1: Thermal monitoring handled by SMI
[ 0.200842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.212013] CPU2: Thermal monitoring handled by SMI
[ 0.225296] CPU3: Thermal monitoring handled by SMI
[ 0.187594] .... node #0, CPUs: #1 #2 #3
[ 0.227416] x86: Booted up 1 node, 4 CPUs
[ 0.227421] smpboot: Total of 4 processors activated (18089.08 BogoMIPS)
[ 0.230324] devtmpfs: initialized
[ 0.235114] EVM: security.selinux
[ 0.235116] EVM: security.SMACK64
[ 0.235117] EVM: security.ima
[ 0.235118] EVM: security.capability
[ 0.235172] PM: Registering ACPI NVS region [mem 0xbb470000-0xbb4f0fff] (528384 bytes)
[ 0.235182] PM: Registering ACPI NVS region [mem 0xbb77e000-0xbb79efff] (135168 bytes)
[ 0.236167] pinctrl core: initialized pinctrl subsystem
[ 0.236231] regulator-dummy: no parameters
[ 0.236265] RTC time: 21:18:11, date: 02/18/14
[ 0.236302] NET: Registered protocol family 16
[ 0.236409] cpuidle: using governor ladder
[ 0.236411] cpuidle: using governor menu
[ 0.236450] ACPI: bus type PCI registered
[ 0.236452] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.236520] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.236523] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.263655] PCI: Using configuration type 1 for base access
[ 0.263813] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.263814] mtrr: probably your BIOS does not setup all CPUs.
[ 0.263815] mtrr: corrected configuration.
[ 0.264583] bio: create slab <bio-0> at 0
[ 0.264761] ACPI: Added _OSI(Module Device)
[ 0.264763] ACPI: Added _OSI(Processor Device)
[ 0.264764] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.264766] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.271925] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.272647] ACPI: SSDT 00000000bb71ac18 0003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.272970] ACPI: Dynamic OEM Table Load:
[ 0.272972] ACPI: SSDT (null) 0003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.273072] ACPI: SSDT 00000000bb718698 0005EC (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.273381] ACPI: Dynamic OEM Table Load:
[ 0.273383] ACPI: SSDT (null) 0005EC (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.280158] ACPI: SSDT 00000000bb719a98 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.280524] ACPI: Dynamic OEM Table Load:
[ 0.280526] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.284013] ACPI: SSDT 00000000bb717d98 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.284347] ACPI: Dynamic OEM Table Load:
[ 0.284349] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.288535] ACPI: Interpreter enabled
[ 0.288542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.288546] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.288560] ACPI: (supports S0 S3 S4 S5)
[ 0.288561] ACPI: Using IOAPIC for interrupt routing
[ 0.288590] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.288702] ACPI: No dock devices found.
[ 0.289090] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.289114] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.295512] ACPI: Power Resource [FN00] (off)
[ 0.295601] ACPI: Power Resource [FN01] (off)
[ 0.296293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.296299] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.296333] \_SB_.PCI0:_OSC invalid UUID
[ 0.296334] _OSC request data:1 1f 0
[ 0.296339] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.297081] PCI host bridge to bus 0000:00
[ 0.297084] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.297087] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.297089] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.297090] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.297092] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.297094] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.297096] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.297097] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.297099] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.297108] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.297126] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.297189] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.297201] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.297208] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.297212] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.297319] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.297349] pci 0000:00:16.0: reg 0x10: [mem 0xf0705800-0xf070580f 64bit]
[ 0.297443] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.297526] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.297552] pci 0000:00:1a.0: reg 0x10: [mem 0xf0706000-0xf07063ff]
[ 0.297663] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.297740] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.297761] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.297860] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.297933] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.298035] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.298080] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.298114] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.298214] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.298260] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.298298] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.298398] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.298444] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.298486] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.298512] pci 0000:00:1d.0: reg 0x10: [mem 0xf0706400-0xf07067ff]
[ 0.298622] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.298678] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.298712] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.298815] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.298848] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.299022] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.299049] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
[ 0.299060] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
[ 0.299071] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
[ 0.299083] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
[ 0.299094] pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f]
[ 0.299105] pci 0000:00:1f.2: reg 0x24: [mem 0xf0705000-0xf07057ff]
[ 0.299174] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.299242] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.299264] pci 0000:00:1f.3: reg 0x10: [mem 0xf0706800-0xf07068ff 64bit]
[ 0.299294] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.299385] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.299413] pci 0000:00:1f.6: reg 0x10: [mem 0xf0704000-0xf0704fff 64bit]
[ 0.299632] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.300376] pci 0000:03:00.0: [14e4:4315] type 00 class 0x028000
[ 0.301102] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.304835] pci 0000:03:00.0: supports D1 D2
[ 0.304837] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.305574] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.306042] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.306049] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.306155] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
[ 0.306173] pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.306201] pci 0000:04:00.0: reg 0x18: [mem 0xf0810000-0xf0810fff 64bit pref]
[ 0.306219] pci 0000:04:00.0: reg 0x20: [mem 0xf0800000-0xf080ffff 64bit pref]
[ 0.306232] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.306296] pci 0000:04:00.0: supports D1 D2
[ 0.306298] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306333] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.312812] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.312821] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.312835] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.312946] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.312959] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.312961] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.312963] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.312964] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.312966] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.312968] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.312970] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.312972] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.313447] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.313503] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.313557] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.313612] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.313665] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.313719] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.313773] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.313829] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.314629] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.314634] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.314638] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.314702] PCI host bridge to bus 0000:ff
[ 0.314704] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.314710] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.314750] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.314789] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.314826] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.314862] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.314898] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.315125] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.315131] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.315173] ACPI: \_SB_.CPBG: notify handler is installed
[ 0.315183] Found 2 acpi root devices
[ 0.315409] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.315525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.315529] vgaarb: loaded
[ 0.315530] vgaarb: bridge control possible 0000:00:02.0
[ 0.315701] SCSI subsystem initialized
[ 0.315750] libata version 3.00 loaded.
[ 0.315768] ACPI: bus type USB registered
[ 0.315783] usbcore: registered new interface driver usbfs
[ 0.315790] usbcore: registered new interface driver hub
[ 0.315813] usbcore: registered new device driver usb
[ 0.315937] PCI: Using ACPI for IRQ routing
[ 0.325847] PCI: pci_cache_line_size set to 64 bytes
[ 0.325961] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.325963] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.325965] e820: reserve RAM buffer [mem 0xbb3ea000-0xbbffffff]
[ 0.325968] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.325969] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.325971] e820: reserve RAM buffer [mem 0xbb77e000-0xbbffffff]
[ 0.325973] e820: reserve RAM buffer [mem 0xbb7e3000-0xbbffffff]
[ 0.325974] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.326065] NetLabel: Initializing
[ 0.326067] NetLabel: domain hash size = 128
[ 0.326068] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.326082] NetLabel: unlabeled traffic allowed by default
[ 0.326164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.326169] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.328217] Switched to clocksource hpet
[ 0.333202] AppArmor: AppArmor Filesystem Enabled
[ 0.333241] pnp: PnP ACPI init
[ 0.333260] ACPI: bus type PNP registered
[ 0.333370] pnp 00:00: [dma 4]
[ 0.333395] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.333418] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.333520] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.333550] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.333609] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.333611] system 00:04: [io 0x0500-0x050f] has been reserved
[ 0.333613] system 00:04: [io 0x0600-0x0603] has been reserved
[ 0.333615] system 00:04: [io 0xffff] has been reserved
[ 0.333618] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.333620] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.333622] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.333623] system 00:04: [io 0xfe00] has been reserved
[ 0.333627] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333673] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.333701] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.333727] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.334002] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.334005] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.334007] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.334009] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.334011] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.334013] system 00:08: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.334015] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.334017] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.334019] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.334021] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.334023] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.334026] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334829] pnp: PnP ACPI: found 9 devices
[ 0.334835] ACPI: bus type PNP unregistered
[ 0.341445] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.341449] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.341451] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.341463] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.341465] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.341478] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 400000
[ 0.341491] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.341493] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341495] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341497] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.341499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341501] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341506] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.341510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.341512] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.341515] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.341517] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.341520] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.341523] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.341527] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.341533] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.341538] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.341546] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.341549] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.341555] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.341560] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.341569] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0820000-0xf083ffff pref]
[ 0.341572] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.341575] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.341581] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.341586] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.341594] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.341609] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.341611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.341612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341614] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.341616] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.341618] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.341619] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.341621] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.341623] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.341625] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.341627] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.341629] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.341630] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.341632] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.341634] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.341636] pci_bus 0000:04: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.341638] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.341640] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.341642] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.341643] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341645] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.341647] pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.341649] pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.341650] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.341652] pci_bus 0000:05: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.341686] NET: Registered protocol family 2
[ 0.341859] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.341976] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.342126] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.342158] TCP: reno registered
[ 0.342165] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.342198] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.342275] NET: Registered protocol family 1
[ 0.342289] pci 0000:00:02.0: Boot video device
[ 0.342785] PCI: CLS 64 bytes, default 64
[ 0.342869] Trying to unpack rootfs image as initramfs...
[ 0.898502] Freeing initrd memory: 32596K (ffff880034046000 - ffff88003601b000)
[ 0.898510] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.898513] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.898595] Simple Boot Flag at 0x36 set to 0x1
[ 0.898771] Scanning for low memory corruption every 60 seconds
[ 0.899079] Initialise system trusted keyring
[ 0.899128] audit: initializing netlink socket (disabled)
[ 0.899148] type=2000 audit(1392758291.780:1): initialized
[ 0.926295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.927455] zbud: loaded
[ 0.927614] VFS: Disk quotas dquot_6.5.2
[ 0.927654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.928091] fuse init (API version 7.22)
[ 0.928167] msgmni has been set to 7498
[ 0.928217] Key type big_key registered
[ 0.928760] Key type asymmetric registered
[ 0.928764] Asymmetric key parser 'x509' registered
[ 0.928801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.928847] io scheduler noop registered
[ 0.928850] io scheduler deadline registered (default)
[ 0.928875] io scheduler cfq registered
[ 0.929473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.929487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.929529] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.929530] vesafb: scrolling: redraw
[ 0.929532] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.929903] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[ 1.053512] Console: switching to colour frame buffer device 128x48
[ 1.176872] fb0: VESA VGA frame buffer device
[ 1.176891] intel_idle: MWAIT substates: 0x1120
[ 1.176892] intel_idle: v0.4 model 0x25
[ 1.176894] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.177072] ACPI: AC Adapter [ADP1] (on-line)
[ 1.177158] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.177162] ACPI: Power Button [PWRB]
[ 1.177192] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.177195] ACPI: Sleep Button [SLPB]
[ 1.177227] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.177770] ACPI: Lid Switch [LID0]
[ 1.177807] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.177810] ACPI: Power Button [PWRF]
[ 1.177861] ACPI: Fan [FAN0] (off)
[ 1.177889] ACPI: Fan [FAN1] (off)
[ 1.178237] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.178240] ACPI: Thermal Zone [TZ00] (27 C)
[ 1.178511] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.178513] ACPI: Thermal Zone [TZ01] (0 C)
[ 1.178537] GHES: HEST is not enabled!
[ 1.178646] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.179230] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.180459] Linux agpgart interface v0.103
[ 1.180549] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.180628] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.181373] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.181556] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.183085] brd: module loaded
[ 1.183810] loop: module loaded
[ 1.184165] libphy: Fixed MDIO Bus: probed
[ 1.184243] tun: Universal TUN/TAP device driver, 1.6
[ 1.184245] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.184297] PPP generic driver version 2.4.2
[ 1.184347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.184353] ehci-pci: EHCI PCI platform driver
[ 1.184583] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.184590] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.184606] ehci-pci 0000:00:1a.0: debug port 2
[ 1.188531] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.188563] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0706000
[ 1.200531] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.200584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.200586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200588] usb usb1: Product: EHCI Host Controller
[ 1.200590] usb usb1: Manufacturer: Linux 3.13.3-031303-generic ehci_hcd
[ 1.200592] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.200779] hub 1-0:1.0: USB hub found
[ 1.200787] hub 1-0:1.0: 3 ports detected
[ 1.201013] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.201018] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.201033] ehci-pci 0000:00:1d.0: debug port 2
[ 1.204958] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.204979] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0706400
[ 1.216541] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.216642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.216647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216650] usb usb2: Product: EHCI Host Controller
[ 1.216654] usb usb2: Manufacturer: Linux 3.13.3-031303-generic ehci_hcd
[ 1.216658] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.217032] hub 2-0:1.0: USB hub found
[ 1.217051] hub 2-0:1.0: 3 ports detected
[ 1.217251] ehci-platform: EHCI generic platform driver
[ 1.217268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.217270] ohci-pci: OHCI PCI platform driver
[ 1.217286] ohci-platform: OHCI generic platform driver
[ 1.217297] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.217410] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.223554] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.223563] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.223980] mousedev: PS/2 mouse device common for all mice
[ 1.224678] rtc_cmos 00:05: RTC can wake from S4
[ 1.224907] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.224947] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.225046] device-mapper: uevent: version 1.0.3
[ 1.225206] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 1.225220] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.225361] TCP: cubic registered
[ 1.225444] NET: Registered protocol family 10
[ 1.225612] NET: Registered protocol family 17
[ 1.225622] Key type dns_resolver registered
[ 1.226256] Loading compiled-in X.509 certificates
[ 1.227239] Loaded X.509 cert 'Magrathea: Glacier signing key: 2ef71fc3d5b78e56de5954cb12fbc17256097e7f'
[ 1.227260] registered taskstats version 1
[ 1.229986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.232097] Key type trusted registered
[ 1.237635] Key type encrypted registered
[ 1.242390] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.242397] IMA: No TPM chip found, activating TPM-bypass!
[ 1.243539] Magic number: 2:826:348
[ 1.243758] rtc_cmos 00:05: setting system clock to 2014-02-18 21:18:12 UTC (1392758292)
[ 1.244747] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.244749] EDD information not available.
[ 1.244812] PM: Hibernation image not present or could not be loaded.
[ 1.246169] Freeing unused kernel memory: 1348K (ffffffff81d1c000 - ffffffff81e6d000)
[ 1.246173] Write protecting the kernel read-only data: 12288k
[ 1.247961] Freeing unused kernel memory: 688K (ffff880001754000 - ffff880001800000)
[ 1.249390] Freeing unused kernel memory: 592K (ffff880001b6c000 - ffff880001c00000)
[ 1.267612] udevd[115]: starting version 175
[ 1.299149] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.299169] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.299425] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.299645] r8169 0000:04:00.0 eth0: RTL8102e at 0xffffc9000060e000, 00:26:b9:20:65:7f, XID 04e00000 IRQ 40
[ 1.327252] [drm] Initialized drm 1.1.0 20060810
[ 1.336285] ahci 0000:00:1f.2: version 3.0
[ 1.336550] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.336621] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.336662] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.336667] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.344244] wmi: Mapper loaded
[ 1.345076] scsi0 : ahci
[ 1.345192] scsi1 : ahci
[ 1.345281] scsi2 : ahci
[ 1.345361] scsi3 : ahci
[ 1.345421] ata1: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705100 irq 41
[ 1.345425] ata2: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705180 irq 41
[ 1.345427] ata3: DUMMY
[ 1.345429] ata4: DUMMY
[ 1.356793] [drm] Memory usable by graphics device = 2048M
[ 1.356799] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 1.356800] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.356819] Console: switching to colour dummy device 80x25
[ 1.412767] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 1.412785] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.412787] [drm] Driver supports precise vblank timestamp query.
[ 1.412871] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.468931] fbcon: inteldrmfb (fb0) is primary device
[ 1.512891] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.645221] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.645223] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.645619] hub 1-1:1.0: USB hub found
[ 1.645809] hub 1-1:1.0: 6 ports detected
[ 1.668854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.669339] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
[ 1.669341] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.669957] ata1.00: configured for UDMA/133
[ 1.670208] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 1.670352] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.670363] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.670503] sd 0:0:0:0: [sda] Write Protect is off
[ 1.670505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.670697] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.672611] sda: sda1 sda2 < sda5 sda6 >
[ 1.673666] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.756829] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.889423] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.889426] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.890020] hub 2-1:1.0: USB hub found
[ 1.890183] hub 2-1:1.0: 8 ports detected
[ 1.896865] tsc: Refined TSC clocksource calibration: 2261.258 MHz
[ 1.961070] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.988903] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.991582] ata2.00: ATAPI: HL-DT-STDVD+/-RW GT30N, A100, max UDMA/100
[ 1.994557] ata2.00: configured for UDMA/100
[ 1.997683] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT30N A100 PQ: 0 ANSI: 5
[ 2.001929] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.001932] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.002132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.002218] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.093784] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=641d
[ 2.093787] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.093790] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[ 2.093792] usb 1-1.4: Manufacturer: CN0FJT7K7248701M025F
[ 2.405291] Console: switching to colour frame buffer device 160x56
[ 2.408184] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.408186] i915 0000:00:02.0: registered panic notifier
[ 2.408202] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 2.413839] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.413855] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 2.416393] acpi device:02: registered as cooling_device6
[ 2.416631] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.416786] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.897553] Switched to clocksource tsc
[ 7.577057] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 7.577062] EXT4-fs (sda1): write access will be enabled during recovery
[ 7.716142] EXT4-fs (sda1): recovery complete
[ 7.717032] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.840024] random: init urandom read with 91 bits of entropy available
[ 8.096623] udevd[443]: starting version 175
[ 8.163597] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 8.168769] lp: driver loaded but no devices found
[ 8.170765] type=1400 audit(1392758299.420:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=516 comm="apparmor_parser"
[ 8.170775] type=1400 audit(1392758299.420:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser"
[ 8.170780] type=1400 audit(1392758299.420:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
[ 8.171506] type=1400 audit(1392758299.424:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser"
[ 8.171514] type=1400 audit(1392758299.424:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
[ 8.171879] type=1400 audit(1392758299.424:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
[ 8.179849] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 8.179861] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.179868] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 8.179871] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.179874] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 8.179877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.179878] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 8.179883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.179884] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.227256] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.251787] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 8.254311] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 8.263937] random: nonblocking pool is initialized
[ 8.319448] Linux video capture interface: v2.00
[ 8.364441] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.376892] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.395520] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:641d)
[ 8.436516] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 8.441857] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[ 8.441959] usbcore: registered new interface driver uvcvideo
[ 8.441962] USB Video Class driver (1.1.1)
[ 8.504695] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.521060] init: failsafe main process (770) killed by TERM signal
[ 8.523822] SKU: Nid=0x1d sku_cfg=0x4015812d
[ 8.523825] SKU: port_connectivity=0x1
[ 8.523826] SKU: enable_pcbeep=0x1
[ 8.523827] SKU: check_sum=0x00000005
[ 8.523828] SKU: customization=0x00000081
[ 8.523829] SKU: external_amp=0x5
[ 8.523830] SKU: platform_type=0x1
[ 8.523831] SKU: swap=0x0
[ 8.523832] SKU: override=0x1
[ 8.524180] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.524183] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.524185] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.524186] mono: mono_out=0x0
[ 8.524187] inputs:
[ 8.524190] Internal Mic=0x19
[ 8.524192] Mic=0x18
[ 8.524194] realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
[ 8.524195] realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
[ 8.542895] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.542980] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.543092] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.640042] Bluetooth: Core ver 2.17
[ 8.640089] NET: Registered protocol family 31
[ 8.640091] Bluetooth: HCI device and connection manager initialized
[ 8.640537] Bluetooth: HCI socket layer initialized
[ 8.640543] Bluetooth: L2CAP socket layer initialized
[ 8.640551] Bluetooth: SCO socket layer initialized
[ 8.653475] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.653481] Bluetooth: BNEP filters: protocol multicast
[ 8.653495] Bluetooth: BNEP socket layer initialized
[ 8.657956] Bluetooth: RFCOMM TTY layer initialized
[ 8.657974] Bluetooth: RFCOMM socket layer initialized
[ 8.657983] Bluetooth: RFCOMM ver 1.11
[ 8.662607] type=1400 audit(1392758299.912:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=869 comm="apparmor_parser"
[ 8.662616] type=1400 audit(1392758299.912:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser"
[ 8.662620] type=1400 audit(1392758299.912:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser"
[ 8.663681] type=1400 audit(1392758299.916:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser"
[ 8.667723] init: avahi-cups-reload main process (856) terminated with status 1
[ 8.680334] ppdev: user-space parallel port driver
[ 9.220436] r8169 0000:04:00.0 eth0: link down
[ 9.220475] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.220480] r8169 0000:04:00.0 eth0: link down
[ 9.291931] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input13
[ 9.310435] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[ 9.446746] bio: create slab <bio-1> at 1
[ 9.578334] Adding 3905532k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:3905532k SSFS
[ 10.226153] init: plymouth-stop pre-start process (1649) terminated with status 1
[ 12.544462] r8169 0000:04:00.0 eth0: link up
[ 12.544477] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 527.632198] perf samples too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment