Parabellum1905y · January 10, 2017 12:07
diff --git a/micro-configuration.nix b/micro-configuration.nix
 # Micro graphical configuration that gets you started with a gnome3 (+ optionally xmonad) desktop
 # * Note that gnome3 installs a *lot* of stuff from the internet
 # * After modifying copying this configuration, run:
 #   $ nixos-rebuild switch # sometimes it helps to try again
 #                          # if this step fails for some reason
 #   $ reboot

 { config, pkgs, ... }:

 {
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
    ];

  # Boot settings.
  boot = {
    initrd = {
      # Disable journaling check on boot because virtualbox doesn't need it
      checkJournalingFS = false;
    };
    # Use the GRUB 2 boot loader.
    loader.grub = {
      enable = true;
      version = 2;
      # Define on which hard drive you want to install Grub.
      device = "/dev/sda";
    };
  };
  
  # Enable networking.
  networking = {
    hostName = "mycomputer"; # Define your hostname.
    hostId = # (use whatever was generated) 
    # wireless.enable = true;  # not needed with virtualbox
  };

  # List services that you want to enable.
  services = {
    # Enable the OpenSSH daemon.
    openssh.enable = true;

    # Enable the X11 windowing system.
    xserver = {
      enable = true;
      layout = "us";

      # Gnome desktop
      # * Slightly more familiar than KDE for people who are used to working with Ubuntu
      # * Gnome3 works out of the box with xmonad
      desktopManager = {
        gnome3.enable = true;
        default = "gnome3";
      };
  
      # Enable XMonad Desktop Environment. (Optional)
      # windowManager = {
      #   xmonad.enable = true; 
      #   xmonad.enableContribAndExtras = true;
      # };
    };
  };
 }
diff --git a/mini-configuration.nix b/mini-configuration.nix
 # Minimal graphical configuration that gets you started with a gnome3 (+ optionally xmonad) desktop
 # * Note that gnome3 installs a *lot* of stuff from the internet
 # * After modifying copying this configuration, run:
 #   $ nixos-rebuild switch # sometimes it helps to try again
 #                          # if this step fails for some reason
 #   $ reboot

 { config, pkgs, ... }:

 {
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
    ];

  # Boot settings.
  boot = {
    initrd = {
      # Disable journaling check on boot because virtualbox doesn't need it
      checkJournalingFS = false; 
      # Make it pretty
      kernelModules = [ "fbcon" ];
    };
    # Use the GRUB 2 boot loader.
    loader.grub = {
      enable = true;
      version = 2;
      # Define on which hard drive you want to install Grub.
      device = "/dev/sda";
    };
  };

  # Enable networking.
  networking = {
    hostName = "mycomputer"; # Define your hostname.
    hostId = # (use whatever was generated) 
    # wireless.enable = true;  # not needed with virtualbox
  };

  # List services that you want to enable.
  services = {
    # Enable the OpenSSH daemon.
    openssh.enable = true;

    # Enable the X11 windowing system.
    xserver = {
      enable = true;
      layout = "us";

      # Gnome desktop
      # * Slightly more familiar than KDE for people who are used to working with Ubuntu
      # * Gnome3 works out of the box with xmonad
      desktopManager = {
        gnome3.enable = true;
        default = "gnome3";
      };
  
      # Enable XMonad Desktop Environment. (Optional)
      # windowManager = {
      #   xmonad.enable = true; 
      #   xmonad.enableContribAndExtras = true;
      # };
    };
  };
  
  # User account.
  # * Set a password using
  #   $ useradd -m me ; passwd me
  users.extraUsers.username = {
    createHome = true;
    home = "/home/me";
    description = "Name Surname";
    extraGroups = [ ];
    isSystemUser = false;
    useDefaultShell = true;
  };
 }
diff --git a/NixSetup.md b/NixSetup.md
	# Micro graphical configuration that gets you started with a gnome3 (+ optionally xmonad) desktop
	# * Note that gnome3 installs a lot of stuff from the internet
	# * After modifying copying this configuration, run:
	# $ nixos-rebuild switch # sometimes it helps to try again
	# # if this step fails for some reason
	# $ reboot

	{ config, pkgs, ... }:

	{
	imports =
	[ # Include the results of the hardware scan.
	./hardware-configuration.nix
	];

	# Boot settings.
	boot = {
	initrd = {
	# Disable journaling check on boot because virtualbox doesn't need it
	checkJournalingFS = false;
	};
	# Use the GRUB 2 boot loader.
	loader.grub = {
	enable = true;
	version = 2;
	# Define on which hard drive you want to install Grub.
	device = "/dev/sda";
	};
	};

	# Enable networking.
	networking = {
	hostName = "mycomputer"; # Define your hostname.
	hostId = # (use whatever was generated)
	# wireless.enable = true; # not needed with virtualbox
	};

	# List services that you want to enable.
	services = {
	# Enable the OpenSSH daemon.
	openssh.enable = true;

	# Enable the X11 windowing system.
	xserver = {
	enable = true;
	layout = "us";

	# Gnome desktop
	# * Slightly more familiar than KDE for people who are used to working with Ubuntu
	# * Gnome3 works out of the box with xmonad
	desktopManager = {
	gnome3.enable = true;
	default = "gnome3";
	};

	# Enable XMonad Desktop Environment. (Optional)
	# windowManager = {
	# xmonad.enable = true;
	# xmonad.enableContribAndExtras = true;
	# };
	};
	};
	}
	# Minimal graphical configuration that gets you started with a gnome3 (+ optionally xmonad) desktop
	# * Note that gnome3 installs a lot of stuff from the internet
	# * After modifying copying this configuration, run:
	# $ nixos-rebuild switch # sometimes it helps to try again
	# # if this step fails for some reason
	# $ reboot

	{ config, pkgs, ... }:

	{
	imports =
	[ # Include the results of the hardware scan.
	./hardware-configuration.nix
	];

	# Boot settings.
	boot = {
	initrd = {
	# Disable journaling check on boot because virtualbox doesn't need it
	checkJournalingFS = false;
	# Make it pretty
	kernelModules = [ "fbcon" ];
	};
	# Use the GRUB 2 boot loader.
	loader.grub = {
	enable = true;
	version = 2;
	# Define on which hard drive you want to install Grub.
	device = "/dev/sda";
	};
	};

	# Enable networking.
	networking = {
	hostName = "mycomputer"; # Define your hostname.
	hostId = # (use whatever was generated)
	# wireless.enable = true; # not needed with virtualbox
	};

	# List services that you want to enable.
	services = {
	# Enable the OpenSSH daemon.
	openssh.enable = true;

	# Enable the X11 windowing system.
	xserver = {
	enable = true;
	layout = "us";

	# Gnome desktop
	# * Slightly more familiar than KDE for people who are used to working with Ubuntu
	# * Gnome3 works out of the box with xmonad
	desktopManager = {
	gnome3.enable = true;
	default = "gnome3";
	};

	# Enable XMonad Desktop Environment. (Optional)
	# windowManager = {
	# xmonad.enable = true;
	# xmonad.enableContribAndExtras = true;
	# };
	};
	};

	# User account.
	# * Set a password using
	# $ useradd -m me ; passwd me
	users.extraUsers.username = {
	createHome = true;
	home = "/home/me";
	description = "Name Surname";
	extraGroups = [ ];
	isSystemUser = false;
	useDefaultShell = true;
	};
	}