CSE-200 serial boot log

gistfile1.txt

Bootloader initializing. Available RAM: 2 GiB

Waiting for root partition to be alive...0
Waiting for root partition to be alive...1
... root partition is alive!
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mapper/storehwcrypt is mounted.
/dev/mapper/storehwcrypt: recovering journal
/dev/mapper/storehwcrypt: clean, 104/65536 files, 15404/262144 blocks
mount: /lib/splash/cache/: mount point does not exist.
/etc/init.d/S00splashscreen: line 27: /sbin/fbsplashd.static: not found
/etc/init.d/S00splashscreen: line 28: can't create /lib/splash/cache/.splash: nonexistent directory
/etc/init.d/S00splashscreen: line 29: can't create /lib/splash/cache/.splash: nonexistent directory
Restore iptables succeeded
Starting rsyslogd ... done
Starting rsyslogd: FAIL
Populating /dev using udev: /etc/init.d/S00splashscreen: line 30: can't create /lib/splash/cache/.splash: nonexistent directory
done
read-only file system detected...done
Starting system message bus: done
S40network: [INFO] Start network (385) lo...
S40network: [INFO] Start network (385) eth0...
S40network: [INFO] Start network (385) wlan0...
S40network: [INFO] Starting network (385) lo...
S40network: [INFO] Starting network (385) wlan0...
S40network: [INFO] Starting network (385) eth0...
udhcpc: started, v1.29.3
udhcpc: sending discover
udhcpc: no lease, forking to background
Starting Network Manager: networkmanager.
Starting SSDP service: ssdpservice.
Starting ntpd: OK
/etc/init.d/rcS: line 23: /etc/init.d/S50dropbear: Permission denied
cp: can't stat '/etc/default/hostapd2.conf': No such file or directory
hostapd: [INFO] Starting hostapd
random: Trying to read entropy from /dev/random
Configuration file: /store/config/hostapd.conf
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0xab5378
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0xab5378 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0xab5378 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0xab5378 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0xab5378 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0xab5378 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0xab5378 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=0501
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=0503
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=0504
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=08
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xab5378 match=7f
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: Add own interface ifindex 4 (ifidx_reason -1)
nl80211: if_indices[16]: 4(-1)
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code BN, new country code BE 
Continue interface setup after channel list update
ctrl_iface not configured!
hostapd: [INFO] Starting hostapd succeeded
Starting lighttpd ... Got lock
Last migration: 201906140008_update_certification_passwords.sql
No migration needed
done
dnsmasq: [INFO] Starting dnsmasq
dnsmasq: [INFO] Starting dnsmasq succeeded
Starting watchdog kicker daemon: watchdogkicker... done.
Starting LED Controller Service: GPIO_4 val=0 dir=in
GPIO_5 val=0 dir=in
ledcontroller.
WiFi country code is valid
Starting ClickShare Configuration Manager: centralstore.
Starting Display Manager: displayymanager.
Starting Standby Manager: standbymanager.
Starting ClickShare Button Agent: dongleagent.
Starting Button Control Daemon: buttoncontroldaemon.
Starting Firmware Update Daemon: firmwareupdatedaemon.
Starting Remote Pairing Daemon: remotepairingdaemon.
ifconfig: eth1: error fetching interface information: Device not found
Starting ClickShare BaseUnit Application: baseunit.
Starting Vixie-cron.
Starting input-event-daemon: done
 New Monit id: 8563bb6062e6c7aba26180c0856910ac
 Stored in '/tmp/monit.id'
Starting Monit 5.25.3 daemon with http interface at [localhost]:2812
'ClickShare-1872264197' Monit 5.25.3 started
'node' process is not running
'node' trying to restart
'node' start: '/etc/init.d/restapi start'
'node' restart on user request
Monit daemon with PID 721 awakened
Awakened by User defined signal 1
'node' trying to restart
'node' stop: '/etc/init.d/restapi stop'
'node' start: '/etc/init.d/restapi start'
'node' restart action done
'node' process is running with pid 1309
'hostapd' monitor on user request
Monit daemon with PID 721 awakened
Awakened by User defined signal 1
'hostapd' monitor action done
'dnsmasq' monitor on user request
Monit daemon with PID 721 awakened
Awakened by User defined signal 1
'dnsmasq' monitor action done
'baseunit' restart on user request
Monit daemon with PID 721 awakened
Awakened by User defined signal 1
'baseunit' trying to restart
'baseunit' stop: '/etc/init.d/baseunit stop'
'baseunit' stop on user request
Monit daemon with PID 721 awakened
'baseunit' start: '/etc/init.d/baseunit start'
'baseunit' start on user request
Monit daemon with PID 721 awakened
'baseunit' restart action done
'baseunit' start action done
Awakened by User defined signal 1
'snmpd' monitor on user request
Monit daemon with PID 721 awakened
Awakened by User defined signal 1
'snmpd' monitor action done
'snmpd' process is not running
'snmpd' trying to restart
'snmpd' start: '/etc/init.d/snmpd start'
'snmpd-cs-subagent' monitor on user request
Monit daemon with PID 721 awakened
'snmpd-cs-subagent' monitor action done
Awakened by User defined signal 1
'snmpd' process is running with pid 3445