RWOverdijk · September 15, 2024 14:00 · rgijt · Jul 18, 2020 · g-patel · Sep 22, 2020
diff --git a/HttpStatusCodes.ts b/HttpStatusCodes.ts
 /**
 * Hypertext Transfer Protocol (HTTP) response status codes.
 *
 * @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
 */
 export enum HttpStatusCode {

  /**
   * The server has received the request headers and the client should proceed to send the request body
   * (in the case of a request for which a body needs to be sent; for example, a POST request).
   * Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
   * To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
   * and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued.
   */
  Continue = 100,

  /**
   * The requester has asked the server to switch protocols and the server has agreed to do so.
   */
  SwitchingProtocols = 101,

  /**
   * A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request.
   * This code indicates that the server has received and is processing the request, but no response is available yet.
   * This prevents the client from timing out and assuming the request was lost.
   */
  Processing = 102,

  /**
   * Standard response for successful HTTP requests.
   * The actual response will depend on the request method used.
   * In a GET request, the response will contain an entity corresponding to the requested resource.
   * In a POST request, the response will contain an entity describing or containing the result of the action.
   */
  Ok = 200,

  /**
   * The request has been fulfilled, resulting in the creation of a new resource.
   */
  Created = 201,

  /**
   * The request has been accepted for processing, but the processing has not been completed.
   * The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
   */
  Accepted = 202,

  /**
   * SINCE HTTP/1.1
   * The server is a transforming proxy that received a 200 OK from its origin,
   * but is returning a modified version of the origin's response.
   */
  NonAuthoritativeInformation = 203,

  /**
   * The server successfully processed the request and is not returning any content.
   */
  NoContent = 204,

  /**
   * The server successfully processed the request, but is not returning any content.
   * Unlike a 204 response, this response requires that the requester reset the document view.
   */
  ResetContent = 205,

  /**
   * The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
   * The range header is used by HTTP clients to enable resuming of interrupted downloads,
   * or split a download into multiple simultaneous streams.
   */
  PartialContent = 206,

  /**
   * The message body that follows is an XML message and can contain a number of separate response codes,
   * depending on how many sub-requests were made.
   */
  MultiStatus = 207,

  /**
   * The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response,
   * and are not being included again.
   */
  AlreadyReported = 208,

  /**
   * The server has fulfilled a request for the resource,
   * and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
   */
  ImUsed = 226,

  /**
   * Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
   * For example, this code could be used to present multiple video format options,
   * to list files with different filename extensions, or to suggest word-sense disambiguation.
   */
  MultipleChoices = 300,

  /**
   * This and all future requests should be directed to the given URI.
   */
  MovedPermanently = 301,

  /**
   * This is an example of industry practice contradicting the standard.
   * The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
   * (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
   * with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
   * to distinguish between the two behaviours. However, some Web applications and frameworks
   * use the 302 status code as if it were the 303.
   */
  Found = 302,

  /**
   * SINCE HTTP/1.1
   * The response to the request can be found under another URI using a GET method.
   * When received in response to a POST (or PUT/DELETE), the client should presume that
   * the server has received the data and should issue a redirect with a separate GET message.
   */
  SeeOther = 303,

  /**
   * Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.
   * In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
   */
  NotModified = 304,

  /**
   * SINCE HTTP/1.1
   * The requested resource is available only through a proxy, the address for which is provided in the response.
   * Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
   */
  UseProxy = 305,

  /**
   * No longer used. Originally meant "Subsequent requests should use the specified proxy."
   */
  SwitchProxy = 306,

  /**
   * SINCE HTTP/1.1
   * In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
   * In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request.
   * For example, a POST request should be repeated using another POST request.
   */
  TemporaryRedirect = 307,

  /**
   * The request and all future requests should be repeated using another URI.
   * 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
   * So, for example, submitting a form to a permanently redirected resource may continue smoothly.
   */
  PermanentRedirect = 308,

  /**
   * The server cannot or will not process the request due to an apparent client error
   * (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
   */
  BadRequest = 400,

  /**
   * Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
   * been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the
   * requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
   * "unauthenticated",i.e. the user does not have the necessary credentials.
   */
  Unauthorized = 401,

  /**
   * Reserved for future use. The original intention was that this code might be used as part of some form of digital
   * cash or micro payment scheme, but that has not happened, and this code is not usually used.
   * Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
   */
  PaymentRequired = 402,

  /**
   * The request was valid, but the server is refusing action.
   * The user might not have the necessary permissions for a resource.
   */
  Forbidden = 403,

  /**
   * The requested resource could not be found but may be available in the future.
   * Subsequent requests by the client are permissible.
   */
  NotFound = 404,

  /**
   * A request method is not supported for the requested resource;
   * for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
   */
  MethodNotAllowed = 405,

  /**
   * The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
   */
  NotAcceptable = 406,

  /**
   * The client must first authenticate itself with the proxy.
   */
  ProxyAuthenticationRequired = 407,

  /**
   * The server timed out waiting for the request.
   * According to HTTP specifications:
   * "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."
   */
  RequestTimeout = 408,

  /**
   * Indicates that the request could not be processed because of conflict in the request,
   * such as an edit conflict between multiple simultaneous updates.
   */
  Conflict = 409,

  /**
   * Indicates that the resource requested is no longer available and will not be available again.
   * This should be used when a resource has been intentionally removed and the resource should be purged.
   * Upon receiving a 410 status code, the client should not request the resource in the future.
   * Clients such as search engines should remove the resource from their indices.
   * Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
   */
  Gone = 410,

  /**
   * The request did not specify the length of its content, which is required by the requested resource.
   */
  LengthRequired = 411,

  /**
   * The server does not meet one of the preconditions that the requester put on the request.
   */
  PreconditionFailed = 412,

  /**
   * The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large".
   */
  PayloadTooLarge = 413,

  /**
   * The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request,
   * in which case it should be converted to a POST request.
   * Called "Request-URI Too Long" previously.
   */
  UriTooLong = 414,

  /**
   * The request entity has a media type which the server or resource does not support.
   * For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
   */
  UnsupportedMediaType = 415,

  /**
   * The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
   * For example, if the client asked for a part of the file that lies beyond the end of the file.
   * Called "Requested Range Not Satisfiable" previously.
   */
  RangeNotSatisfiable = 416,

  /**
   * The server cannot meet the requirements of the Expect request-header field.
   */
  ExpectationFailed = 417,

  /**
   * This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol,
   * and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
   * teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com.
   */
  IAmATeapot = 418,

  /**
   * The request was directed at a server that is not able to produce a response (for example because a connection reuse).
   */
  MisdirectedRequest = 421,

  /**
   * The request was well-formed but was unable to be followed due to semantic errors.
   */
  UnprocessableEntity = 422,

  /**
   * The resource that is being accessed is locked.
   */
  Locked = 423,

  /**
   * The request failed due to failure of a previous request (e.g., a PROPPATCH).
   */
  FailedDependency = 424,

  /**
   * The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.
   */
  UpgradeRequired = 426,

  /**
   * The origin server requires the request to be conditional.
   * Intended to prevent "the 'lost update' problem, where a client
   * GETs a resource's state, modifies it, and PUTs it back to the server,
   * when meanwhile a third party has modified the state on the server, leading to a conflict."
   */
  PreconditionRequired = 428,

  /**
   * The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
   */
  TooManyRequests = 429,

  /**
   * The server is unwilling to process the request because either an individual header field,
   * or all the header fields collectively, are too large.
   */
  RequestHeaderFieldsTooLarge = 431,

  /**
   * A server operator has received a legal demand to deny access to a resource or to a set of resources
   * that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
   */
  UnavailableForLegalReasons = 451,

  /**
   * A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
   */
  InternalServerError = 500,

  /**
   * The server either does not recognize the request method, or it lacks the ability to fulfill the request.
   * Usually this implies future availability (e.g., a new feature of a web-service API).
   */
  NotImplemented = 501,

  /**
   * The server was acting as a gateway or proxy and received an invalid response from the upstream server.
   */
  BadGateway = 502,

  /**
   * The server is currently unavailable (because it is overloaded or down for maintenance).
   * Generally, this is a temporary state.
   */
  ServiceUnavailable = 503,

  /**
   * The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
   */
  GatewayTimeout = 504,

  /**
   * The server does not support the HTTP protocol version used in the request
   */
  HttpVersionNotSupported = 505,

  /**
   * Transparent content negotiation for the request results in a circular reference.
   */
  VariantAlsoNegotiates = 506,

  /**
   * The server is unable to store the representation needed to complete the request.
   */
  InsufficientStorage = 507,

  /**
   * The server detected an infinite loop while processing the request.
   */
  LoopDetected = 508,

  /**
   * Further extensions to the request are required for the server to fulfill it.
   */
  NotExtended = 510,

  /**
   * The client needs to authenticate to gain network access.
   * Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used
   * to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).
   */
  NetworkAuthenticationRequired = 511,
 }
	/**
	* Hypertext Transfer Protocol (HTTP) response status codes.
	*
	* @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
	*/
	export enum HttpStatusCode {

	/**
	* The server has received the request headers and the client should proceed to send the request body
	* (in the case of a request for which a body needs to be sent; for example, a POST request).
	* Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
	* To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
	* and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued.
	*/
	Continue = 100,

	/**
	* The requester has asked the server to switch protocols and the server has agreed to do so.
	*/
	SwitchingProtocols = 101,

	/**
	* A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request.
	* This code indicates that the server has received and is processing the request, but no response is available yet.
	* This prevents the client from timing out and assuming the request was lost.
	*/
	Processing = 102,

	/**
	* Standard response for successful HTTP requests.
	* The actual response will depend on the request method used.
	* In a GET request, the response will contain an entity corresponding to the requested resource.
	* In a POST request, the response will contain an entity describing or containing the result of the action.
	*/
	Ok = 200,

	/**
	* The request has been fulfilled, resulting in the creation of a new resource.
	*/
	Created = 201,

	/**
	* The request has been accepted for processing, but the processing has not been completed.
	* The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
	*/
	Accepted = 202,

	/**
	* SINCE HTTP/1.1
	* The server is a transforming proxy that received a 200 OK from its origin,
	* but is returning a modified version of the origin's response.
	*/
	NonAuthoritativeInformation = 203,

	/**
	* The server successfully processed the request and is not returning any content.
	*/
	NoContent = 204,

	/**
	* The server successfully processed the request, but is not returning any content.
	* Unlike a 204 response, this response requires that the requester reset the document view.
	*/
	ResetContent = 205,

	/**
	* The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
	* The range header is used by HTTP clients to enable resuming of interrupted downloads,
	* or split a download into multiple simultaneous streams.
	*/
	PartialContent = 206,

	/**
	* The message body that follows is an XML message and can contain a number of separate response codes,
	* depending on how many sub-requests were made.
	*/
	MultiStatus = 207,

	/**
	* The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response,
	* and are not being included again.
	*/
	AlreadyReported = 208,

	/**
	* The server has fulfilled a request for the resource,
	* and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
	*/
	ImUsed = 226,

	/**
	* Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
	* For example, this code could be used to present multiple video format options,
	* to list files with different filename extensions, or to suggest word-sense disambiguation.
	*/
	MultipleChoices = 300,

	/**
	* This and all future requests should be directed to the given URI.
	*/
	MovedPermanently = 301,

	/**
	* This is an example of industry practice contradicting the standard.
	* The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
	* (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
	* with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
	* to distinguish between the two behaviours. However, some Web applications and frameworks
	* use the 302 status code as if it were the 303.
	*/
	Found = 302,

	/**
	* SINCE HTTP/1.1
	* The response to the request can be found under another URI using a GET method.
	* When received in response to a POST (or PUT/DELETE), the client should presume that
	* the server has received the data and should issue a redirect with a separate GET message.
	*/
	SeeOther = 303,

	/**
	* Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.
	* In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
	*/
	NotModified = 304,

	/**
	* SINCE HTTP/1.1
	* The requested resource is available only through a proxy, the address for which is provided in the response.
	* Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
	*/
	UseProxy = 305,

	/**
	* No longer used. Originally meant "Subsequent requests should use the specified proxy."
	*/
	SwitchProxy = 306,

	/**
	* SINCE HTTP/1.1
	* In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
	* In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request.
	* For example, a POST request should be repeated using another POST request.
	*/
	TemporaryRedirect = 307,

	/**
	* The request and all future requests should be repeated using another URI.
	* 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
	* So, for example, submitting a form to a permanently redirected resource may continue smoothly.
	*/
	PermanentRedirect = 308,

	/**
	* The server cannot or will not process the request due to an apparent client error
	* (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
	*/
	BadRequest = 400,

	/**
	* Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
	* been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the
	* requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
	* "unauthenticated",i.e. the user does not have the necessary credentials.
	*/
	Unauthorized = 401,

	/**
	* Reserved for future use. The original intention was that this code might be used as part of some form of digital
	* cash or micro payment scheme, but that has not happened, and this code is not usually used.
	* Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
	*/
	PaymentRequired = 402,

	/**
	* The request was valid, but the server is refusing action.
	* The user might not have the necessary permissions for a resource.
	*/
	Forbidden = 403,

	/**
	* The requested resource could not be found but may be available in the future.
	* Subsequent requests by the client are permissible.
	*/
	NotFound = 404,

	/**
	* A request method is not supported for the requested resource;
	* for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
	*/
	MethodNotAllowed = 405,

	/**
	* The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
	*/
	NotAcceptable = 406,

	/**
	* The client must first authenticate itself with the proxy.
	*/
	ProxyAuthenticationRequired = 407,

	/**
	* The server timed out waiting for the request.
	* According to HTTP specifications:
	* "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."
	*/
	RequestTimeout = 408,

	/**
	* Indicates that the request could not be processed because of conflict in the request,
	* such as an edit conflict between multiple simultaneous updates.
	*/
	Conflict = 409,

	/**
	* Indicates that the resource requested is no longer available and will not be available again.
	* This should be used when a resource has been intentionally removed and the resource should be purged.
	* Upon receiving a 410 status code, the client should not request the resource in the future.
	* Clients such as search engines should remove the resource from their indices.
	* Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
	*/
	Gone = 410,

	/**
	* The request did not specify the length of its content, which is required by the requested resource.
	*/
	LengthRequired = 411,

	/**
	* The server does not meet one of the preconditions that the requester put on the request.
	*/
	PreconditionFailed = 412,

	/**
	* The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large".
	*/
	PayloadTooLarge = 413,

	/**
	* The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request,
	* in which case it should be converted to a POST request.
	* Called "Request-URI Too Long" previously.
	*/
	UriTooLong = 414,

	/**
	* The request entity has a media type which the server or resource does not support.
	* For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
	*/
	UnsupportedMediaType = 415,

	/**
	* The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
	* For example, if the client asked for a part of the file that lies beyond the end of the file.
	* Called "Requested Range Not Satisfiable" previously.
	*/
	RangeNotSatisfiable = 416,

	/**
	* The server cannot meet the requirements of the Expect request-header field.
	*/
	ExpectationFailed = 417,

	/**
	* This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol,
	* and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
	* teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com.
	*/
	IAmATeapot = 418,

	/**
	* The request was directed at a server that is not able to produce a response (for example because a connection reuse).
	*/
	MisdirectedRequest = 421,

	/**
	* The request was well-formed but was unable to be followed due to semantic errors.
	*/
	UnprocessableEntity = 422,

	/**
	* The resource that is being accessed is locked.
	*/
	Locked = 423,

	/**
	* The request failed due to failure of a previous request (e.g., a PROPPATCH).
	*/
	FailedDependency = 424,

	/**
	* The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.
	*/
	UpgradeRequired = 426,

	/**
	* The origin server requires the request to be conditional.
	* Intended to prevent "the 'lost update' problem, where a client
	* GETs a resource's state, modifies it, and PUTs it back to the server,
	* when meanwhile a third party has modified the state on the server, leading to a conflict."
	*/
	PreconditionRequired = 428,

	/**
	* The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
	*/
	TooManyRequests = 429,

	/**
	* The server is unwilling to process the request because either an individual header field,
	* or all the header fields collectively, are too large.
	*/
	RequestHeaderFieldsTooLarge = 431,

	/**
	* A server operator has received a legal demand to deny access to a resource or to a set of resources
	* that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
	*/
	UnavailableForLegalReasons = 451,

	/**
	* A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
	*/
	InternalServerError = 500,

	/**
	* The server either does not recognize the request method, or it lacks the ability to fulfill the request.
	* Usually this implies future availability (e.g., a new feature of a web-service API).
	*/
	NotImplemented = 501,

	/**
	* The server was acting as a gateway or proxy and received an invalid response from the upstream server.
	*/
	BadGateway = 502,

	/**
	* The server is currently unavailable (because it is overloaded or down for maintenance).
	* Generally, this is a temporary state.
	*/
	ServiceUnavailable = 503,

	/**
	* The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
	*/
	GatewayTimeout = 504,

	/**
	* The server does not support the HTTP protocol version used in the request
	*/
	HttpVersionNotSupported = 505,

	/**
	* Transparent content negotiation for the request results in a circular reference.
	*/
	VariantAlsoNegotiates = 506,

	/**
	* The server is unable to store the representation needed to complete the request.
	*/
	InsufficientStorage = 507,

	/**
	* The server detected an infinite loop while processing the request.
	*/
	LoopDetected = 508,

	/**
	* Further extensions to the request are required for the server to fulfill it.
	*/
	NotExtended = 510,

	/**
	* The client needs to authenticate to gain network access.
	* Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used
	* to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).
	*/
	NetworkAuthenticationRequired = 511,
	}