Eagle CAD: Скрипт нормализации подписей компонентов на плате

normalize-names.ulp

#usage "<b>Snap silkscreen text on grid</b><hr/>\n"
       "<author>Author: Ruslan Popov ([email protected])</author>"

#require 6.05

string VERSION = "1.0";

int result = 0; // dialog result
string str; // temporary string
string cmd = "SET UNDO_LOG OFF;\n"; // script command to execute

int silk_screen_layers[] = {LAYER_TNAMES, LAYER_BNAMES};
enum {UNIT_MIL, UNIT_MM, UNIT_IN};
int curr_unit = UNIT_MM;


//
// Redisplays the layers that were visible when the ULP was started
//
void reset_visible(UL_BOARD B) {
  sprintf(str, "DISP NONE;\nDISP ");
  cmd += str;
  B.layers(L) {
    if (L.visible) {
      sprintf(str, "%d ", L.number);
      cmd += str;
    }
  }
  cmd += ";\n";
}


//
// Snapping.
//
real snapping(int unit, int value, real step) {
  real tmp = 0.0;
  real multiplier = 0.0;
  switch(unit) {
    case UNIT_MIL:
      tmp = u2mil(value);
      break;
    case UNIT_MM:
      tmp = u2mm(value);
      break;
    case UNIT_IN:
      tmp = u2inch(value);
      break;
  }
  multiplier = 1.0 / step;
  tmp = round(tmp * multiplier) / multiplier;
  return tmp;
}


if (board) {
  real grid_step = 0.025;
  real grid_min = 0.0001;
  real grid_max = 10;
  string text_font[] = {"vector", "proportional", "fixed"};
  int selected_font = 0;
  string text_align[] = {"bottom left", "bottom center", "bottom right",
                        "center left", "center", "center right",
                        "top left", "top center", "top right"};
  int selected_align = 4;
  string text_size[] = {"0.3048", "0.4064", "0.6096", "0.8128", "1", "1.016",
                        "1.27", "1.4224", "1.6764", "1.778", "2.18", "2.54"};
  int selected_size = 3;
  int ratio_value = 18;
  int ratio_min = 11;
  int ratio_max = 50;
  int snap_to_grid = 1;


  result = dlgDialog("Normalize component texts") {
    sprintf(str, "<qt>"+
                 "<h3>Normalize component texts v%s</h3>"+
                 "<p>by Ruslan Popov ([email protected])</p>"+
                 "<p>This ULP normalizes the component names "+
                 "on the silkscreen layers to the specified values.</p>"+
                 "</qt>", VERSION);
    dlgLabel(str);

    // options
    dlgHBoxLayout {
      dlgGroup("Output units") {
        dlgRadioButton("m&il", curr_unit) {
          curr_unit = UNIT_MIL;
          grid_step = 1;
        }
        dlgRadioButton("&mm", curr_unit) {
          curr_unit = UNIT_MM;
          grid_step = 0.025;
        }
        dlgRadioButton("&inches", curr_unit) {
          curr_unit = UNIT_IN;
          grid_step = 0.001;
        }
      }
      dlgSpacing(20);
      dlgGridLayout {
        dlgCell(0, 0) dlgLabel("Font");
        dlgCell(0, 1) dlgComboBox(text_font, selected_font) cmd += selected_font;

        dlgCell(1, 0) dlgLabel("Align");
        dlgCell(1, 1) dlgComboBox(text_align, selected_align) cmd += selected_align;

        dlgCell(2, 0) dlgLabel("Size");
        dlgCell(2, 1) dlgComboBox(text_size, selected_size) cmd += selected_size;

        dlgCell(3, 0) dlgLabel("Ratio");
        dlgCell(3, 1) dlgIntEdit(ratio_value, ratio_min, ratio_max);

        dlgCell(4, 0) dlgLabel("Grid Step");
        dlgCell(4, 1) dlgRealEdit(grid_step, grid_min, grid_max);

        dlgCell(5, 0, 5, 1) dlgCheckBox("Snap to grid", snap_to_grid);
      }
    }

    // buttons
    dlgHBoxLayout {
      dlgStretch(1);
      dlgPushButton("+Normalize") dlgAccept();
      dlgPushButton("-Cancel") dlgReject();
    }
  };

  if (!result) exit(0);

  switch(curr_unit) {
    case UNIT_MIL:
      sprintf(str, "GRID MIL %f;\n", grid_step);
      break;
    case UNIT_MM:
      sprintf(str, "GRID MM %f;\n", grid_step);
      break;
    case UNIT_IN:
      sprintf(str, "GRID INCH %f;\n", grid_step);
      break;
  }

  cmd += str;

  board(B) {
    B.elements(E) {
      if (E.package) {
        if (!E.smashed) {
          sprintf(str, "SMASH %s;\n", E.name);
          cmd += str;
        }
        if (E.smashed["VALUE"]) {
          sprintf(str, "DELETE %s>VALUE;\n", E.name);
          cmd += str;
        }
        if (snap_to_grid) {
          E.texts(T) {
            sprintf(str, "MOVE %s>NAME (%f %f);\n", E.name,
                    snapping(curr_unit, T.x, grid_step),
                    snapping(curr_unit, T.y, grid_step));
            cmd += str;
          }
        }
        cmd += "\n";
      }
    }

    sprintf(str, "DISPLAY NONE TNAMES BNAMES;\n");
    cmd += str;
    sprintf(str, "GROUP ALL; CHANGE FONT %s (>0 0);\n", text_font[selected_font]);
    cmd += str;
    sprintf(str, "GROUP ALL; CHANGE ALIGN %s (>0 0);\n", text_align[selected_align]);
    cmd += str;
    sprintf(str, "GROUP ALL; CHANGE SIZE %s (>0 0);\n", text_size[selected_size]);
    cmd += str;
    sprintf(str, "GROUP ALL; CHANGE RATIO %u (>0 0);\n", ratio_value);
    cmd += str;

    reset_visible(B);
  }

  cmd += "GRID LAST;\nSET UNDO_LOG ON;\n";


  result = dlgDialog("Edit and execute script") {
    dlgHBoxLayout {
      dlgSpacing(500); // Force width of dialog to 500
    }
    dlgTextEdit(cmd);
    dlgHBoxLayout {
      dlgPushButton("+Execute") dlgAccept();
      dlgPushButton("-Cancel") dlgReject();
    }
  };

  // Execute script if it was accepted
  if (!result)
    exit(0);
  else
    exit(cmd); // run composed script
} else {
  dlgMessageBox("Start this ULP on board only!", "OK");
  exit(1);
}