RamonGilabert/bluetooth.sh

devrique · 2017-01-27T18:52:10Z

Thank you for this! This Expect script was really useful for me. :)

Sergey82 · 2017-06-03T19:36:49Z

thank you very much, this code was what i was looking for

higstar · 2017-09-15T11:31:18Z

Divyaera · 2018-07-25T12:40:28Z

spawn: invalid option -- 'a'
*** Usage: spawn [-h] [-v] [-jN]
bluez.sh: line 7: expect: command not found
bluez.sh: line 8: send: command not found
bluez.sh: line 10: expect: command not found
bluez.sh: line 11: send: command not found
bluez.sh: line 12: send_user: command not found
bluez.sh: line 14: send_user: command not found
bluez.sh: line 15: send: command not found
bluez.sh: line 16: expect: command not found
bluez.sh: line 17: send: command not found
bluez.sh: line 19: send: command not found
bluez.sh: line 21: send: command not found
bluez.sh: line 23: send_user: command not found
bluez.sh: line 24: send: command not found
bluez.sh: line 25: expect: command not found

These are what I got, how to use it. Can anyone help?

chemage · 2018-07-30T05:39:37Z

Awesome script!

kakposoe · 2019-03-11T14:17:25Z

Thank you @RamonGilabert. I did not know about expect scriping!

JeffRossMT · 2019-06-08T15:15:04Z

With bluetoothctl 5.48 the command line switch -a is no longer valid and must be removed.

I haven't used expect in a very long time--it was good to find this! Thank you.

goldylucks · 2019-07-26T09:53:56Z

Thanks!

For new comers:

Install expect:

$ sudo apt install expect

I use without sudo, and without the -a switch which isn't supported anymore, so the final script is:

#!/usr/bin/expect -f

set prompt "#"
set address [lindex $argv 0]

spawn bluetoothctl
expect -re $prompt
send "remove $address\r"
sleep 1
expect -re $prompt
send "scan on\r"
send_user "\nSleeping\r"
sleep 5
send_user "\nDone sleeping\r"
send "scan off\r"
expect "Controller"
send "trust $address\r"
sleep 2
send "pair $address\r"
sleep 2
send "0000\r"
sleep 3
send_user "\nShould be paired now.\r"
send "quit\r"
expect eof

run the script like so:

$ /path/to/script.sh 00:00:00:00:00  # replace 00:00:00:00:00 with the device mac address

ksonbol · 2019-11-14T13:50:36Z

Didn't work for Ubuntu 18.04. I also had to remove and re-pair the device. Any idea how to make it work for 18.04?

jerlam06 · 2020-04-06T08:15:11Z

Didn't work for Ubuntu 18.04. I also had to remove and re-pair the device. Any idea how to make it work for 18.04?

Here is the script I adapted to my need:

#!/usr/bin/expect -f

set prompt "#"
set address "MY_MAC_ADDRESS"

spawn bluetoothctl
expect -re $prompt
send "remove $address\r"
sleep 1
expect -re $prompt
send "scan on\r"
send_user "\nSleeping\r"
sleep 5
send_user "\nDone sleeping\r"
send "scan off\r"
send "connect $address\r"
sleep 5
send "quit\r"
expect eof

This basically removes the device from the paired list, then connects it again.

stratus-ss · 2020-04-13T13:57:51Z

Didn't work for Ubuntu 18.04. I also had to remove and re-pair the device. Any idea how to make it work for 18.04?

Here is the script I adapted to my need:
#!/usr/bin/expect -f

set prompt "#"
set address "MY_MAC_ADDRESS"

spawn bluetoothctl
expect -re $prompt
send "remove $address\r"
sleep 1
expect -re $prompt
send "scan on\r"
send_user "\nSleeping\r"
sleep 5
send_user "\nDone sleeping\r"
send "scan off\r"
send "connect $address\r"
sleep 5
send "quit\r"
expect eof
This basically removes the device from the paired list, then connects it again.

Thanks for this.. this was driving me crazy!

gopakumar · 2020-04-26T02:48:14Z

apt-get install expect

my 2 cents

jbh · 2020-07-02T19:10:58Z

This is great, thanks. I'm finding a lot of bugs as I go along, though. Sometimes it doesn't wait long enough for the device to be discovered. I've increased the wait time from scan to 15 seconds, and it still sometimes will reply "Device unavailable" after waiting 15 seconds. Also, sometimes the script completely crashes my bluetooth service, and I have to restart bluetooth. This is what I have so far:

#!/usr/bin/expect -f
# Bluetooth seems to get messed up after dual booting
# Winblows for gaming... This script resets my bluetooth

set prompt "#"
set address [lindex $argv 0]

spawn bluetoothctl
expect -re $prompt
send "scan on\r"
send_user "\nWaiting for device.\r"
# I thought I could rely on this expect to make sure the device is discovered and ready
# It finds it, but this still isn't good enough... I still need a sleep
expect -re "\\\[NEW\\\] Device $address"
send_user "\nFound deivce.\r"
sleep 5
send "remove $address\r"
sleep 2
expect -re $prompt
send "pair $address\r"
sleep 2
send "connect $address\r"
sleep 3
send "trust $address\r"
sleep 2
send_user "\n$address should be paired now.\r"
send "scan off\r"
send "quit\r"
expect eof

Anyone found a way to use expect or something similar to wait for success of each command? I'm new to expect since discovering this script.

santhosh12992 · 2020-08-31T08:49:56Z

if you are looking for something programmatic using python => https://gist.github.com/castis/0b7a162995d0b465ba9c84728e60ec01

masterchop · 2020-09-12T07:01:04Z

Just what i need it. thanks.
Just a quick question is it really need it do the scan off? i skipped that step.

AleXSR700 · 2021-01-06T19:25:22Z

Hi everyone,
this script was exactly what I was looking for :)
It works great with my BT mouse, however iit does not work with my BT keyboard as the keyboard requires me to enter a code. The script does not show me the code so it does not pair properly,

Could someone help me change the script to work with a BT keyboard requiring a pairing code to be entered?

Thank you
Alex

psihozefir · 2021-10-26T07:09:46Z

#!/usr/bin/expect -f
if {$argc != 2} {
    puts "No arguments."
    exit 1
}

# First argument needs to be the device MAC address;
# ... second argument needs to be the PIN.
set DEV [lindex $argv 0]
set PIN [lindex $argv 1]

# Do not wait after getting a response.
set timeout -1

# bluetoothctl is in $PATH
spawn bluetoothctl

# Wait for complete startup.
expect "Agent registered"

# If the device is already paired, we remove it first, so we are in a known state of affairs;
# ... we also handle the case in which the device is not already paired.
send "remove $DEV\r"
expect -re "removed|not available"

send "scan on\r"
# Only scan until we see a response from the device;
# ... if the device is not on or in range, this will block the script in scanning;
# ... please make sure the device is: 1) in range, 2) powered on and 3) discoverable.
expect "Device $DEV"

# Stop scanning.
send "scan off\r"
expect "Discovery stopped"

# Request pairing.
send "pair $DEV\r"
expect "Enter PIN code:"

# Send PIN.
send "$PIN\r"
expect "Pairing successful"

This is a general purpose script to programatically pair with a device from a shell script. License GPL2.

MariwanJ · 2021-11-11T11:22:04Z

But no one mentioned how you discover the mac address between hundred devices around you.
name: is the name of the device you want to find the MAC

hcitool scan >list.txt  
grep "name" list.txt>mydevice.txt 
cat mydevice.txt | sed 's/name//' > mac.txt
cat mac.txt |tr -d " \t\n\r" >result.txt

the above works but hcitool is depricated. how do you write the same script for bluetoothctl
Thanks in advance

aviladev · 2021-11-26T01:49:04Z

No PIN in my case, it just asks if I accept pairing, have to type yes. I've come to this:

#!/usr/bin/expect -f

set timeout 5

spawn bluetoothctl

set address [lindex $argv 0]
set pairExecuted 0

# Defines procedure (function) `pair`, `address` is the parameter
proc pair {address} {
  send "scan on\n"
  sleep 3
  send "scan off\n"

  send "pair $address\n"
}

send "agent on\n"
send "power on\n"
expect "Changing power on succeeded" {
  send "devices\n"
  expect "Device ${address}" {
    send "remove ${address}\n"

    expect "Device has been removed" {

      # Calls procedure `pair` passing `address` as argument (defined at the top)
      puts [pair ${address}]

      # Increments `pairExecuted` variable, so the next
      # check (if statement below) will know this has already been executed
      incr pairExecuted
    }
  }

  # Checks if the pair procedure has not yet been executed
  # this avoids executing it twice
  # in other words: if procedure `pair` not yet executed, execute it
  if {$pairExecuted == 0}
    puts [pair ${address}]
  }
}

expect "Accept pairing (yes/no):" { send "yes\n" }
expect "Pairing successful" { send "exit\n" }

expect eof

About the language used here: https://www.tcl-lang.org/

srosato · 2022-01-03T23:05:12Z

Awesome script thanks so much!

NeonLightning · 2022-07-22T14:18:17Z

No PIN in my case, it just asks if I accept pairing, have to type yes. I've come to this:

#!/usr/bin/expect -f

set timeout 5

spawn bluetoothctl

set address [lindex $argv 0]
set pairExecuted 0

# Defines procedure (function) `pair`, `address` is the parameter
proc pair {address} {
  send "scan on\n"
  sleep 3
  send "scan off\n"

  send "pair $address\n"
}

send "agent on\n"
send "power on\n"
expect "Changing power on succeeded" {
  send "devices\n"
  expect "Device ${address}" {
    send "remove ${address}\n"

    expect "Device has been removed" {

      # Calls procedure `pair` passing `address` as argument (defined at the top)
      puts [pair ${address}]

      # Increments `pairExecuted` variable, so the next
      # check (if statement below) will know this has already been executed
      incr pairExecuted
    }
  }

  # Checks if the pair procedure has not yet been executed
  # this avoids executing it twice
  # in other words: if procedure `pair` not yet executed, execute it
  if {$pairExecuted == 0}
    puts [pair ${address}]
  }
}

expect "Accept pairing (yes/no):" { send "yes\n" }
expect "Pairing successful" { send "exit\n" }

expect eof

About the language used here: https://www.tcl-lang.org/

i can't seem to use it. i get
": no such file or directory

RamonGilabert/bluetooth.sh

devrique commented Jan 27, 2017

Sergey82 commented Jun 3, 2017

higstar commented Sep 15, 2017

Divyaera commented Jul 25, 2018

chemage commented Jul 30, 2018

kakposoe commented Mar 11, 2019

JeffRossMT commented Jun 8, 2019

goldylucks commented Jul 26, 2019

ksonbol commented Nov 14, 2019 •

edited

Loading

jerlam06 commented Apr 6, 2020 •

edited

Loading

stratus-ss commented Apr 13, 2020

gopakumar commented Apr 26, 2020

jbh commented Jul 2, 2020

santhosh12992 commented Aug 31, 2020

masterchop commented Sep 12, 2020

AleXSR700 commented Jan 6, 2021

psihozefir commented Oct 26, 2021 •

edited

Loading

MariwanJ commented Nov 11, 2021

aviladev commented Nov 26, 2021

srosato commented Jan 3, 2022

NeonLightning commented Jul 22, 2022

	#!/usr/bin/expect -f

	set prompt "#"
	set address [lindex $argv 0]

	spawn sudo bluetoothctl -a
	expect -re $prompt
	send "remove $address\r"
	sleep 1
	expect -re $prompt
	send "scan on\r"
	send_user "\nSleeping\r"
	sleep 5
	send_user "\nDone sleeping\r"
	send "scan off\r"
	expect "Controller"
	send "trust $address\r"
	sleep 2
	send "pair $address\r"
	sleep 2
	send "0000\r"
	sleep 3
	send_user "\nShould be paired now.\r"
	send "quit\r"
	expect eof

RamonGilabert/bluetooth.sh

devrique commented Jan 27, 2017

Sergey82 commented Jun 3, 2017

higstar commented Sep 15, 2017

Divyaera commented Jul 25, 2018

chemage commented Jul 30, 2018

kakposoe commented Mar 11, 2019

JeffRossMT commented Jun 8, 2019

goldylucks commented Jul 26, 2019

ksonbol commented Nov 14, 2019 • edited Loading

jerlam06 commented Apr 6, 2020 • edited Loading

stratus-ss commented Apr 13, 2020

gopakumar commented Apr 26, 2020

jbh commented Jul 2, 2020

santhosh12992 commented Aug 31, 2020

masterchop commented Sep 12, 2020

AleXSR700 commented Jan 6, 2021

psihozefir commented Oct 26, 2021 • edited Loading

MariwanJ commented Nov 11, 2021

aviladev commented Nov 26, 2021

srosato commented Jan 3, 2022

NeonLightning commented Jul 22, 2022

ksonbol commented Nov 14, 2019 •

edited

Loading

jerlam06 commented Apr 6, 2020 •

edited

Loading

psihozefir commented Oct 26, 2021 •

edited

Loading