-
-
Save Ray33/ba189a729d81babc99d7cef0fb6fbcd8 to your computer and use it in GitHub Desktop.
| sudo su | |
| yum --enablerepo=extras install epel-release | |
| yum -y install patch dkms kernel-devel perl | |
| yum update | |
| #Required for kernel num 5: | |
| yum --enablerepo=elrepo-kernel -y install kernel-ml-devel | |
| reboot | |
| #After reboot: | |
| sudo su | |
| ###############Update kernel START################### | |
| ## Update to latest kernel - optional | |
| rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org | |
| rpm -Uvh http://www.elrepo.org/ elrepo-release-7.0-5.el7.elrepo.noarch.rpm | |
| yum --enablerepo=elrepo-kernel install kernel-ml | |
| awk -F\' /^menuentry/{print\$2} /etc/grub2.cfg | |
| #Note: In the list of kernels, identify the latest and remeber it's index (index starts from 0) | |
| #In case the first item in the list (index=0) is the kernel you want to activate, run: | |
| grub2-set-default 0 | |
| grub2-mkconfig -o /boot/grub2/grub.cfg | |
| vi /etc/default/grub | |
| #change line: GRUB_DEFAULT=saved to GRUB_DEFAULT=0 | |
| reboot | |
| #verify current kernel via: | |
| uname -a | |
| #remove old kernels: | |
| rpm -qa | grep kernel | sort | |
| #for the kernels in the list , that you want to remove: | |
| yum remove REPLACE_WITH_KERNEL_NAME | |
| ###############Update kernel END ################### | |
| reboot | |
| sudo su | |
| //TODO fetch latest ena_driver from: https://github.com/amzn/amzn-drivers/releases, this script is based on 2.2.9 | |
| cd /tmp | |
| curl -o ena_linux_2.2.9.tar.gz https://codeload.github.com/amzn/amzn-drivers/tar.gz/ena_linux_2.2.9 | |
| tar zxvf ena_linux_2.2.9.tar.gz | |
| mv amzn-drivers-ena_linux_2.2.9 /usr/src/ena-2.2.9 | |
| #Copy the bellow and paste in command line (lines 52-63): | |
| cat <<EOF > /usr/src/ena-2.2.9/dkms.conf | |
| PACKAGE_NAME="ena" | |
| PACKAGE_VERSION="2.2.9" | |
| AUTOINSTALL="yes" | |
| REMAKE_INITRD="yes" | |
| BUILT_MODULE_LOCATION[0]="kernel/linux/ena" | |
| BUILT_MODULE_NAME[0]="ena" | |
| DEST_MODULE_LOCATION[0]="/updates" | |
| DEST_MODULE_NAME[0]="ena" | |
| CLEAN="cd kernel/linux/ena; make clean" | |
| MAKE="cd kernel/linux/ena; make BUILD_KERNEL=\${kernelver}" | |
| EOF | |
| dkms add -m ena -v 2.2.9 | |
| dkms build -m ena -v 2.2.9 | |
| dkms install -m ena -v 2.2.9 | |
| dracut -f --add-drivers ena | |
| ##Verification: | |
| modinfo ena | |
| ##### You should get similar info: ##### | |
| #filename: /lib/modules/5.7.2-1.el7.elrepo.x86_64/extra/ena.ko | |
| #version: 2.2.9g | |
| #license: GPL | |
| #description: Elastic Network Adapter (ENA) | |
| #author: Amazon.com, Inc. or its affiliates | |
| #srcversion: CBF3F17443FAB1A53E24D56 | |
| #alias: pci:v00001D0Fd0000EC21sv*sd*bc*sc*i* | |
| #alias: pci:v00001D0Fd0000EC20sv*sd*bc*sc*i* | |
| #alias: pci:v00001D0Fd00001EC2sv*sd*bc*sc*i* | |
| #alias: pci:v00001D0Fd00000EC2sv*sd*bc*sc*i* | |
| #alias: pci:v00001D0Fd00000051sv*sd*bc*sc*i* | |
| #depends: | |
| #retpoline: Y | |
| #name: ena | |
| #vermagic: 5.7.2-1.el7.elrepo.x86_64 SMP mod_unload modversions | |
| #parm: debug:Debug level (0=none,...,16=all) (int) | |
| #parm: rx_queue_size:Rx queue size. The size should be a power of 2. Max value is 8K | |
| # (int) | |
| #parm: force_large_llq_header:Increases maximum supported header size in LLQ mode to 224 bytes, while reducing the maximum TX queue size by half. | |
| # (int) | |
| #parm: num_io_queues:Sets number of RX/TX queues to allocate to device. The maximum value depends on the device and number of online CPUs. | |
| # (int) | |
| # The below is relevant only if the instance did not have ENA enabled before : | |
| #Stop the instance and from another AWS instance run: | |
| aws ec2 modify-instance-attribute --region THE_INSTANCE_REGION --instance-id THE_INSTANCE_ID --ena-support | |
| #e.g: aws ec2 modify-instance-attribute --region ap-southeast-1 --instance-id i-0123456789abcdef --ena-support | |
| #Create an image from the instance | |
| #Open the image on ENA supportive instance type (e.g. M5 , R4,.. ) | |
| #Validate interface: | |
| ifconfig -s -a | |
| #get Iface name, e.g: ens5 | |
| ethtool -i ens5 | |
| ##### You should get similar info: ##### | |
| #driver: ena | |
| #version: 2.1.1g ################## the ENA version ############# | |
| #firmware-version: | |
| #expansion-rom-version: | |
| #bus-info: 0000:00:05.0 | |
| #supports-statistics: yes | |
| #supports-test: no | |
| #supports-eeprom-access: no | |
| #supports-register-dump: no | |
| #supports-priv-flags: no | |
| ###################################################################################### | |
| # Find this gist useful ?? : Please share your love by clicking the "Star" icon above | |
| ###################################################################################### |
Ray,
Have you tried this as a bash script in a Packer build?
No.
Updated to ENA v. 2.0.3
For anyone that following this and updated the Kernel to 5.0.4 and is getting the error message "Your kernel headers for kernel 5.0.4... cannot be found at..." when running dkms build -m ena -v 2.0.3
You need to install the kernel-ml-devel package, to do this, run
yum --enablerepo=elrepo-kernel -y install kernel-ml-devel
And proceed with the command that failed.
yup just hit that @gmogames thanks for the heads up
Updated to ENA v. 2.1.1
For anyone that following this and updated the Kernel to 5.0.4 and is getting the error message "Your kernel headers for kernel 5.0.4... cannot be found at..." when running
dkms build -m ena -v 2.0.3You need to install the kernel-ml-devel package, to do this, run
yum --enablerepo=elrepo-kernel -y install kernel-ml-develAnd proceed with the command that failed.
Updated the script following your commnet.
FYI
Recent success result for modinfo ena
Represent as following
filename: /lib/modules/5.3.5-1.el7.elrepo.x86_64/extra/ena.ko
version: 2.1.1g
license: GPL
description: Elastic Network Adapter (ENA)
author: Amazon.com, Inc. or its affiliates
srcversion: F342F1BEE707726508E3DF8
alias: pci:v00001D0Fd0000EC21svsdbcsci*
alias: pci:v00001D0Fd0000EC20svsdbcsci*
alias: pci:v00001D0Fd00001EC2svsdbcsci*
alias: pci:v00001D0Fd00000EC2svsdbcsci*
depends:
retpoline: Y
name: ena
vermagic: 5.3.5-1.el7.elrepo.x86_64 SMP mod_unload modversions
parm: debug:Debug level (0=none,...,16=all) (int)
parm: rx_queue_size:Rx queue size. The size should be a power of 2. Max value is 8K
(int)
parm: force_large_llq_header:Increases maximum supported header size in LLQ mode to 224 bytes, while reducing the maximum TX queue size by half.
(int)
updated to version 2.2.9
I am getting this error : any idea what could be the reason.
_[root@ip-172-31-44-34 tmp]# dkms install -m ena -v 1.6.0
ena.ko.xz:
Running module version sanity check.
Adding any weak-modules
Failed to install module enanvme_core_