RayneYoruka

Ressources

• Download firmware
• Activate WoL
• mlxconfig docs
• mlxburn docs
• mst tools 4.22 (To Work On Windows11)

General

• use admin console

loonietoque

Important: This does not apply to Twitch's Enhanced Broadcasting program, but I have been involved with it for feedback. It should work decently enough.

Ultrawide Streaming Notes

When I am speaking on "ultrawide", I am usually referring to the common aspect ratio stated as "21:9".

I argue there is a case for content creation at 21:9 resolutions. Primarily,

• Smartphones are a very common viewing device, and are ever-increasing in lengthier aspect ratios. Many creators already use 18:9 instead of 16:9 for

TimeForANinja

Ressources

• Download firmware
• Activate WoL
• mlxconfig docs
• mlxburn docs

General

• use admin console

get fw version

plembo

Want to configure UPnP on EdgeRouter-4?

Don't do it!

Introduction

As a former sysadmin that once helped ride herd over around 1,000 servers, of which around 10% were Internet-facing, I've never been a fan of autoconfiguation when it comes to punching holes through the firewall. I've seen the tripwire logs, and it's sobering.

The Problem

So enabling UPnP on my EdgeRouter-4 wasn't something I had on the roadmap, but when I ran into difficulty getting DLNA to work on the default VLAN, I thought it was worth looking into (never mind that, as I later learned, having UPnP turned on wasn't going make a bit of difference on my local network: another reason that mastering theory should always come before practice).

osipxd

paper-versions.json

JSON containing links to the all known PaperMC versions.

Note

This JSON is being updated manually. If you want to always have the most actual paper-versions.json, check out this generator: qing762/paper-version-links (dynamic JSON)

Kudos to @qing762

radleta

Note: This works all except for the shell script part. Need to figure that out. You can do it interactively just not from the command prompt.

1. Install Git
2. Install Git Bash via Git Tortoise install
3. Added HOME=/c/Users/$USERNAME to C:\Program Files\Git\etc\profile
4. See https://stackoverflow.com/questions/32232978/change-the-location-of-the-directory-in-a-windows-install-of-git-bash
5. Download rsync.exe from https://repo.msys2.org/msys/x86_64/rsync-3.2.3-2-x86_64.pkg.tar.zst use 7-zip to decompress
6. See https://blog.tiger-workshop.com/add-rsync-to-git-bash-for-windows/
7. Put rsync.exe into C:\Program Files\Git\usr\bin
8. Open Git Bash and create a key file using ssh-keygen

jcberthon

NetworkManager WiFi Power Saving

NetworkManager supports WiFi powersaving but the function is rather undocumented.

From the source code: wifi.powersave can have the following value:

• NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0): use the default value
• NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1): don't touch existing setting
• NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2): disable powersave

mcandre

• udp://tracker.openbittorrent.com:80
• udp://tracker.publicbt.com:80
• udp://tracker.istole.it:80
• udp://tracker.btzoo.eu:80/announce
• http://opensharing.org:2710/announce
• udp://open.demonii.com:1337/announce
• http://announce.torrentsmd.com:8080/announce.php
• http://announce.torrentsmd.com:6969/announce
• http://bt.careland.com.cn:6969/announce
• http://i.bandito.org/announce