How to set up Arch Linux in Termux on Android

TermuxArchSetup2024.md

NOTICE: This will take up about 3 GB of space on your device, before syncing any repos or projects.

Install Termux from the Play Store and launch it

Once it finishes unpacking:

pkg update

pkg upgrade -y

pkg install wget -y

Now that all the required packages are installed let's set up the Arch Linux environment.

wget -nv https://raw.githubusercontent.com/RebelLion420/build_tools/refs/heads/master/termux-arch-setup/termux_arch_setup.sh

bash termux_arch_setup.sh

You may get some errors during the install, but it is safe to ignore as long as it shows the green message block at the end. You are now ready to boot up Arch Linux, but it still needs to be configured.

startarch

You should load into the root shell by default. We first have to set up the package manager to function properly and then add our user account.

pacman-key --init

pacman-key --populate

pacman -Sy --noconfirm archlinuxarm-keyring glibc-locales

pacman-key --populate archlinuxarm

addauser <newuser>

Let the command install and setup sudo for your new user, and when it's done set your password:

passwd <newuser>

exit

Now we can login to our user account and finish the environment setup. Our new way of booting up our Linux environment is by using:

startarch login <newuser>

Next we install the required packages inside the Linux environment and download the scripts that will handle the rest

sudo pacman -Syu --needed --noconfirm base-devel wget git

This will take a long time to upgrade. You may have to keep your phone awake while it runs, acquiring a wakelock did not seem to work on my device.

cd ~ && git clone https://github.com/RebelLion420/build_tools.git tools

cd ~/tools/termux-arch-setup

sudo bash termux_build_env.sh

Enter your shell username when prompted and let the script process. After it finishes you should have your desired repos synced and ready to compile. I only used this environment to build Android kernels on my device, I cannot offer any advice for building ROMs on an Android device.

sudo bash fresharch.sh не работает

"sudo bash fresharch.sh не работает"
Не работает т.к. на сервере нет указанного в скрипте файла.
Нужно править fresharch.sh под актуальные сборки fakeroot доступные на сервере. http://ftp.debian.org/debian/pool/main/f/fakeroot

`:: Arch Linux Arm setup begins

:: Checking prerequisites...

fresharch.sh: line 46: $(echo $pkgs): ambiguous redirect

:: Packages up-to-date.

:: Making fakeroot package...

--2021-12-01 06:00:36-- http://ftp.debian.org/debian/pool/main/f/fakeroot/fakeroot_1.24.orig.tar.gz
Resolving ftp.debian.org (ftp.debian.org)... 151.101.50.132, 2a04:4e42:c::644
Connecting to ftp.debian.org (ftp.debian.org)|151.101.50.132|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2021-12-01 06:00:37 ERROR 404: Not Found.

tar: fakeroot_1.24.orig.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
fresharch.sh: line 56: cd: /home/mike/.tmp/fakeroot-1.24/: No such file or directory`

https://launchpad.net/ubuntu/+source/fakeroot/1.24-1

I assume the warnings is about modification to your script.. didnt have a choice, if your interested i can upload a working version, although i did a few things manually.

Mike

I've had a few issues.

signature from "Arch Linux ARM Build System [email protected]" is unknown trust

Solved running the following commands:

• pacman-key --init
• pacman-key --populate
• pacman -S archlinuxarm-keyring
• pacman-key --populate archlinuxarm

sudo not installed

Solved with a simple pacman -Syyu sudo as root.

fresharch.sh download

Just download the file as usual from Google Drive and then manually copy it into ~/arch/root if you're still using the root user, or inside your home folder

Fake root not found (404)

In the fresharch.sh script, replace the fakeroot version from 1.24 to 1.29 or one available from http://ftp.debian.org/debian/pool/main/f/fakeroot/. Remember to update the filename in the wget, tar and the following related commands

`:: Arch Linux Arm setup begins

:: Checking prerequisites...

fresharch.sh: line 46: $(echo $pkgs): ambiguous redirect

:: Packages up-to-date.

:: Making fakeroot package...

--2021-12-01 06:00:36-- http://ftp.debian.org/debian/pool/main/f/fakeroot/fakeroot_1.24.orig.tar.gz Resolving ftp.debian.org (ftp.debian.org)... 151.101.50.132, 2a04:4e42:c::644 Connecting to ftp.debian.org (ftp.debian.org)|151.101.50.132|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2021-12-01 06:00:37 ERROR 404: Not Found.

tar: fakeroot_1.24.orig.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now fresharch.sh: line 56: cd: /home/mike/.tmp/fakeroot-1.24/: No such file or directory`

https://launchpad.net/ubuntu/+source/fakeroot/1.24-1

I assume the warnings is about modification to your script.. didnt have a choice, if your interested i can upload a working version, although i did a few things manually.

Mike

I can't seem to solve : fakeroot_1.24.orig.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
fresharch.sh: line 56: cd: /home/mike/.tmp/fakeroot-1.24/: No such file or directory` part

extract https://drive.google.com/file/d/133GPa3o8NzE4MiKE5rYTWBVlBcweVdX-/view?usp=drivesdk
Make sure the files are extracted in internal storage mainly /storage/emulates/0/ then bash /sdcard/pacman.sh in terminal, this will add arch Linux repository to your termux environment

Don't know how to fix execv errors need help pls.

I saw the link was set to private , made it public so sorry for that.

Is there any chroot option for installing this? I want install it with chroot permissions...

I've had a few issues.

signature from "Arch Linux ARM Build System [email protected]" is unknown trust

Solved running the following commands:

* pacman-key --init

* pacman-key --populate

* pacman -S archlinuxarm-keyring

* pacman-key --populate archlinuxarm

sudo not installed

Solved with a simple pacman -Syyu sudo as root.

fresharch.sh download

Just download the file as usual from Google Drive and then manually copy it into ~/arch/root if you're still using the root user, or inside your home folder

Fake root not found (404)

In the fresharch.sh script, replace the fakeroot version from 1.24 to 1.29 or one available from http://ftp.debian.org/debian/pool/main/f/fakeroot/. Remember to update the filename in the wget, tar and the following related commands

This should all be fixed now. I tested the script to be working myself but I would like to know of any issues

since you're publishing a post to install arch on termux, why don't you just put them all in an interactive script to simplify the process? just like how the original material is meant to be