i3 config

config

# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!


set $mod Mod4

# =============================================================================
# Initial setup
# =============================================================================

# Set workspace icons
set $WS1 "1: Home"
set $WS2 "2: Work"
set $WS3 "3: Term"
set $WS4 "4: Subl"
set $WS5 "5:"
set $WS6 "6:"
set $WS7 "7:Thunder"
set $WS8 "8:Misc"
set $WS12 "Feed"
set $WS_Wechat "Wechat"

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
#font pango:monospace 8
font pango:Awesome, Overpass Mono 10
hide_edge_borders both

gaps inner 6
gaps outer 0
smart_borders on
smart_gaps on


# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

set $bg            #455a64
set $bg-inactive   #273238
set $bg-urgent     #455a64
set $text          #eeeeec
set $text-inactive #babdb6

set $bar           #222222
set $seperator     #444444
set $statusline    #888A85

#                       border        background   text           indicator
client.focused          $bg           $bg          $text          $bar
client.unfocused        $bg-inactive  $bg-inactive $text-inactive $bar
client.focused_inactive $bg-inactive  $bg-inactive $text-inactive $bar
client.urgent           $bg-urgent    $bg-urgent   $text          $bar


# bar {
#     font           pango:Awesome,Overpass Mono 12
#     position       top
#     status_command i3status
#     tray_output    primary
#     workspace_buttons yes
#     
#     colors {
#         background              $bar
#         separator               $seperator
#         statusline              $statusline
#         active_workspace        $bg $bg $text
#         focused_workspace       $bg-urgent $bg $text
#         inactive_workspace      $seperator $seperator $text
#         urgent_workspace        $bg-urgent $bg-urgent $text
#     }
# }

bar {
    font pango:Noto Sans 12
    status_command bumblebee-status -m load memory pasink time date -t gruvbox-powerline -p time.format="%H:%M" date.format="%a, %b %d %Y" nic.exclude=br,lo,docker memory.format="Mem: {percent:03.01f}%" load.left-click="ls" memory.left-click="ls" pasink.right-click="gnome-control-center sound" traffic.right-click="gnome-control-center network"
    position top
    output HDMI1
#    tray_output none
    workspace_buttons yes
}


bar{
	font pango:Noto Sans 12
	workspace_buttons yes
	status_command bumblebee-status -m disk -t gruvbox-powerline -p disk.path=/home/richman
	output VGA1
	position top
}


# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod


# Application launcher.
#bindsym $mod+e exec --no-startup-id ~/.bin/dmenu-frecency

# start a terminal
bindsym $mod+Return exec gnome-terminal

# kill focused window
bindsym $mod+Shift+q kill

# start dmenu (a program launcher)
# bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# bindsym $mod+d exec rofi -show run -location 1 -width 100 -lines 1 -line-margin 0 -line-padding 1 -separator-sytle none -columns 9 -bw 0 -hide-scrollbar -kb-row-select "Tab" -kb-row-tab ""
bindsym $mod+d exec rofi -lines 5 -width=35 -line-margin 0 -show drun -hide-scrollbar -modi drun -kb-row-select "Tab" -kb-row-tab ""
bindsym Mod1+Tab exec rofi -width=35 -line-margin 0 -show window -hide-scrollbar -kb-row-select "Tab" -kb-row-tab ""

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right

# alternatively, you can use the cursor keys:
#bindsym $mod+Shift+Left move left
#bindsym $mod+Shift+Down move down
#bindsym $mod+Shift+Up move up
#bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+u fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# Fix some workspaces on Monitors
workspace $WS1 output HDMI1
workspace $WS2 output HDMI1
workspace $WS3 output HDMI1
workspace $WS4 output HDMI1
workspace $WS5 output HDMI1
workspace $WS6 output VGA1
workspace $WS7 output VGA1
workspace $WS8 output VGA1
workspace $WS9 output VGA1


# switch to workspace
bindsym $mod+1 workspace $WS1
bindsym $mod+2 workspace $WS2
bindsym $mod+3 workspace $WS3
bindsym $mod+4 workspace $WS4
bindsym $mod+5 workspace $WS5
bindsym $mod+6 workspace $WS6
bindsym $mod+7 workspace $WS7
bindsym $mod+8 workspace $WS8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
bindsym $mod+Tab workspace back_and_forth
bindsym $mod+Ctrl+Right workspace next
bindsym $mod+Ctrl+Left workspace prev

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace $WS1; workspace $WS1
bindsym $mod+Shift+2 move container to workspace $WS2; workspace $WS2
bindsym $mod+Shift+3 move container to workspace $WS3; workspace $WS3
bindsym $mod+Shift+4 move container to workspace $WS4; workspace $WS4
bindsym $mod+Shift+5 move container to workspace $WS5; workspace $WS5
bindsym $mod+Shift+6 move container to workspace $WS6; workspace $WS6
bindsym $mod+Shift+7 move container to workspace $WS7; workspace $WS7
bindsym $mod+Shift+8 move container to workspace $WS8; workspace $WS8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
bindsym $mod+Shift+Left move container to workspace prev; workspace prev;
bindsym $mod+Shift+Right move container to workspace next; workspace next;
bindsym $mod+Shift+Ctrl+Right move workspace to output right
bindsym $mod+Shift+Ctrl+Left move workspace to output left


#Assign programs
assign [class="subl3" window_role="^(?!GtkFileChooserDialog)"] $WS3
#assign [class="(?i).*terminal" window_role="^(?!GtkFileChooserDialog)"] $WS2
assign [class="chrom.*" instance="chrom" ] $WS1
assign [class="chrom.*" instance="crx_jidckkocjhilapjdibodfopjkbnibkcf"] $WS_Wechat
assign [class="mpv|Vlc" window_role="^(?!GtkFileChooserDialog)"] $WS6
assign [class="(?i)thunderbird" window_role="^(?!GtkFileChooserDialog)"] $WS7
assign [class="(?i)feedreader"] $WS12

# Jump to urgent
bindsym $mod+x [urgent=latest] focus

# Make these program st$art floated
for_window [title="^floatme$"]	floating enable
for_window [class="(?i)speedcrunch"] floating enable, border normal
for_window [class="(?i)pavucontrol"] floating enable, move position mouse
for_window [class="(?i)pavucontrol" instance="pavucontrol-bar"] move down $height px
# Assign floating windows.
for_window [title="Preferences$"] floating enable
for_window [window_role="^conversation$"] floating enable
for_window [class="(?i)mplayer"] floating enable
for_window [window_role="messages"] floating enable
for_window [window_role="pop-up"] floating enable
for_window [window_role="pop-up"] move position mouse
for_window [window_role="task_dialog"] floating enable
# Remove titlebar
# for_window [class="^.*"] border pixel 1
for_window [class="chrom.*"] border pixel 1
for_window [class="mpv|URxvt|gnome-terminal|*terminal"] border pixel 1
for_window [class="^(?i)subl.*"] border pixel 1


# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym j resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym l resize shrink height 10 px or 10 ppt
        bindsym semicolon resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"


set $Locker i3lock-fancy -p && sleep 1

set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
mode "$mode_system" {
    bindsym l exec --no-startup-id $Locker, mode "default"
    bindsym e exec --no-startup-id i3-msg exit, mode "default"
    bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default"
    bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default"
    bindsym r exec --no-startup-id systemctl reboot, mode "default"
    bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default"  

    # back to normal: Enter or Escape
    bindsym Return mode "default"
    bindsym Escape mode "default"
}

bindsym $mod+p mode "$mode_system"
bindsym $mod+Pause mode "$mode_system"

bindsym XF86AudioRaiseVolume exec "amixer -D pulse sset Master '5%+'"
bindsym XF86AudioLowerVolume exec "amixer -D pulse sset Master '5%-'"
bindsym XF86AudioMute exec "amixer -D pulse set Master toggle"
bindsym XF86AudioMicMute exec "amixer -D pulse sset Capture toggle"

#Screenshot
bindsym --release Print exec gnome-screenshot
bindsym --release Shift+Print exec gnome-screenshot -c
bindsym --release Shift+Ctrl+Print exec gnome-screenshot -a -c
bindsym --release Ctrl+Print exec gnome-screenshot -a



# =============================================================================
# Launch initial applications
# =============================================================================
exec --no-startup-id /usr/lib/gnome-settings-daemon/gsd-xsettings
exec_always --no-startup-id gnome-power-manager

# Dual monitor
exec --no-startup-id xrandr --output HDMI1 --left-of VGA1

#Restore background
exec --no-startup-id nitrogen --restore

exec --no-startup-id nm-apple