Skip to content

Instantly share code, notes, and snippets.

@RobertCNelson

RobertCNelson/J721E_pinmux.h

Created October 20, 2021 15:34
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save RobertCNelson/378307c31a3168380c178c5f9faa062c to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save RobertCNelson/378307c31a3168380c178c5f9faa062c to your computer and use it in GitHub Desktop.
Download ZIP
Raw
J721E_pinmux.h
/**
* Note: This file was auto-generated by TI PinMux on 10/20/2021.
*
* \file J721E_pinmux.h
*
* \brief This file contains pad configure register offsets and bit-field
* value macros for different configurations,
*
* BIT[21] TXDISABLE disable the pin's output driver
* BIT[18] RXACTIVE enable the pin's input buffer (typically kept enabled)
* BIT[17] PULLTYPESEL set the iternal resistor pull direction high or low (if enabled)
* BIT[16] PULLUDEN internal resistor disable (0 = enabled / 1 = disabled)
* BIT[3:0] MUXMODE select the desired function on the given pin
*
* \copyright Copyright (CU) 2021 Texas Instruments Incorporated -
* http://www.ti.com/
*/
#ifndef _J721E_PIN_MUX_H_
#define _J721E_PIN_MUX_H_
/* ========================================================================== */
/* Include Files */
/* ========================================================================== */
#include "pinmux.h"
#include "csl_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/* ========================================================================== */
/* Macros & Typedefs */
/* ========================================================================== */
#define PIN_MODE(mode) (mode)
#define PINMUX_END (-1)
/** \brief Active mode configurations */
/** \brief Resistor enable */
#define PIN_PULL_DISABLE (0x1U << 16U)
/** \brief Pull direction */
#define PIN_PULL_DIRECTION (0x1U << 17U)
/** \brief Receiver enable */
#define PIN_INPUT_ENABLE (0x1U << 18U)
/** \brief Driver disable */
#define PIN_OUTPUT_DISABLE (0x1U << 21U)
/** \brief Wakeup enable */
#define PIN_WAKEUP_ENABLE (0x1U << 29U)
/** \brief Pad config register offset in control module */
enum pinMainOffsets
{
PIN_EXTINTN = 0x0U,
PIN_PRG1_PRU0_GPO0 = 0x4U,
PIN_PRG1_PRU0_GPO1 = 0x8U,
PIN_PRG1_PRU0_GPO2 = 0xCU,
PIN_PRG1_PRU0_GPO3 = 0x10U,
PIN_PRG1_PRU0_GPO4 = 0x14U,
PIN_PRG1_PRU0_GPO5 = 0x18U,
PIN_PRG1_PRU0_GPO6 = 0x1CU,
PIN_PRG1_PRU0_GPO7 = 0x20U,
PIN_PRG1_PRU0_GPO8 = 0x24U,
PIN_PRG1_PRU0_GPO9 = 0x28U,
PIN_PRG1_PRU0_GPO10 = 0x2CU,
PIN_PRG1_PRU0_GPO11 = 0x30U,
PIN_PRG1_PRU0_GPO12 = 0x34U,
PIN_PRG1_PRU0_GPO13 = 0x38U,
PIN_PRG1_PRU0_GPO14 = 0x3CU,
PIN_PRG1_PRU0_GPO15 = 0x40U,
PIN_PRG1_PRU0_GPO16 = 0x44U,
PIN_PRG1_PRU0_GPO17 = 0x4CU,
PIN_PRG1_PRU0_GPO18 = 0x50U,
PIN_PRG1_PRU0_GPO19 = 0x54U,
PIN_PRG1_PRU1_GPO0 = 0x58U,
PIN_PRG1_PRU1_GPO1 = 0x5CU,
PIN_PRG1_PRU1_GPO2 = 0x60U,
PIN_PRG1_PRU1_GPO3 = 0x64U,
PIN_PRG1_PRU1_GPO4 = 0x68U,
PIN_PRG1_PRU1_GPO5 = 0x6CU,
PIN_PRG1_PRU1_GPO6 = 0x70U,
PIN_PRG1_PRU1_GPO7 = 0x74U,
PIN_PRG1_PRU1_GPO8 = 0x78U,
PIN_PRG1_PRU1_GPO9 = 0x7CU,
PIN_PRG1_PRU1_GPO10 = 0x80U,
PIN_PRG1_PRU1_GPO11 = 0x84U,
PIN_PRG1_PRU1_GPO12 = 0x88U,
PIN_PRG1_PRU1_GPO13 = 0x8CU,
PIN_PRG1_PRU1_GPO14 = 0x90U,
PIN_PRG1_PRU1_GPO15 = 0x94U,
PIN_PRG1_PRU1_GPO16 = 0x98U,
PIN_PRG1_PRU1_GPO17 = 0x9CU,
PIN_PRG1_PRU1_GPO18 = 0xA0U,
PIN_PRG1_PRU1_GPO19 = 0xA4U,
PIN_PRG1_MDIO0_MDIO = 0xA8U,
PIN_PRG1_MDIO0_MDC = 0xACU,
PIN_PRG0_PRU0_GPO0 = 0xB0U,
PIN_PRG0_PRU0_GPO1 = 0xB4U,
PIN_PRG0_PRU0_GPO2 = 0xB8U,
PIN_PRG0_PRU0_GPO3 = 0xBCU,
PIN_PRG0_PRU0_GPO4 = 0xC0U,
PIN_PRG0_PRU0_GPO5 = 0xC4U,
PIN_PRG0_PRU0_GPO6 = 0xC8U,
PIN_PRG0_PRU0_GPO7 = 0xCCU,
PIN_PRG0_PRU0_GPO8 = 0xD0U,
PIN_PRG0_PRU0_GPO9 = 0xD4U,
PIN_PRG0_PRU0_GPO10 = 0xD8U,
PIN_PRG0_PRU0_GPO11 = 0xDCU,
PIN_PRG0_PRU0_GPO12 = 0xE0U,
PIN_PRG0_PRU0_GPO13 = 0xE4U,
PIN_PRG0_PRU0_GPO14 = 0xE8U,
PIN_PRG0_PRU0_GPO15 = 0xECU,
PIN_PRG0_PRU0_GPO16 = 0xF0U,
PIN_PRG0_PRU0_GPO17 = 0xF4U,
PIN_PRG0_PRU0_GPO18 = 0xF8U,
PIN_PRG0_PRU0_GPO19 = 0xFCU,
PIN_PRG0_PRU1_GPO0 = 0x100U,
PIN_PRG0_PRU1_GPO1 = 0x104U,
PIN_PRG0_PRU1_GPO2 = 0x108U,
PIN_PRG0_PRU1_GPO3 = 0x10CU,
PIN_PRG0_PRU1_GPO4 = 0x110U,
PIN_PRG0_PRU1_GPO5 = 0x114U,
PIN_PRG0_PRU1_GPO6 = 0x118U,
PIN_PRG0_PRU1_GPO7 = 0x11CU,
PIN_PRG0_PRU1_GPO8 = 0x120U,
PIN_PRG0_PRU1_GPO9 = 0x124U,
PIN_PRG0_PRU1_GPO10 = 0x128U,
PIN_PRG0_PRU1_GPO11 = 0x12CU,
PIN_PRG0_PRU1_GPO12 = 0x130U,
PIN_PRG0_PRU1_GPO13 = 0x134U,
PIN_PRG0_PRU1_GPO14 = 0x138U,
PIN_PRG0_PRU1_GPO15 = 0x13CU,
PIN_PRG0_PRU1_GPO16 = 0x140U,
PIN_PRG0_PRU1_GPO17 = 0x144U,
PIN_PRG0_PRU1_GPO18 = 0x148U,
PIN_PRG0_PRU1_GPO19 = 0x14CU,
PIN_PRG0_MDIO0_MDIO = 0x150U,
PIN_PRG0_MDIO0_MDC = 0x154U,
PIN_RGMII5_TX_CTL = 0x158U,
PIN_RGMII5_RX_CTL = 0x15CU,
PIN_RGMII5_TD3 = 0x160U,
PIN_RGMII5_TD2 = 0x164U,
PIN_RGMII5_TD1 = 0x168U,
PIN_RGMII5_TD0 = 0x16CU,
PIN_RGMII5_TXC = 0x170U,
PIN_RGMII5_RXC = 0x174U,
PIN_RGMII5_RD3 = 0x178U,
PIN_RGMII5_RD2 = 0x17CU,
PIN_RGMII5_RD1 = 0x180U,
PIN_RGMII5_RD0 = 0x184U,
PIN_RGMII6_TX_CTL = 0x188U,
PIN_RGMII6_RX_CTL = 0x18CU,
PIN_RGMII6_TD3 = 0x190U,
PIN_RGMII6_TD2 = 0x194U,
PIN_RGMII6_TD1 = 0x198U,
PIN_RGMII6_TD0 = 0x19CU,
PIN_RGMII6_TXC = 0x1A0U,
PIN_RGMII6_RXC = 0x1A4U,
PIN_RGMII6_RD3 = 0x1A8U,
PIN_RGMII6_RD2 = 0x1ACU,
PIN_RGMII6_RD1 = 0x1B0U,
PIN_RGMII6_RD0 = 0x1B4U,
PIN_MDIO0_MDIO = 0x1B8U,
PIN_MDIO0_MDC = 0x1BCU,
PIN_SPI0_CS0 = 0x1C0U,
PIN_SPI0_CS1 = 0x1C4U,
PIN_SPI0_CLK = 0x1C8U,
PIN_SPI0_D0 = 0x1CCU,
PIN_SPI0_D1 = 0x1D0U,
PIN_SPI1_CS0 = 0x1D4U,
PIN_SPI1_CS1 = 0x1D8U,
PIN_SPI1_CLK = 0x1DCU,
PIN_SPI1_D0 = 0x1E0U,
PIN_SPI1_D1 = 0x1E4U,
PIN_UART0_RXD = 0x1E8U,
PIN_UART0_TXD = 0x1ECU,
PIN_UART0_CTSN = 0x1F0U,
PIN_UART0_RTSN = 0x1F4U,
PIN_UART1_RXD = 0x1F8U,
PIN_UART1_TXD = 0x1FCU,
PIN_UART1_CTSN = 0x200U,
PIN_UART1_RTSN = 0x204U,
PIN_MCAN0_RX = 0x208U,
PIN_MCAN0_TX = 0x20CU,
PIN_MCAN1_RX = 0x210U,
PIN_MCAN1_TX = 0x214U,
PIN_I3C0_SCL = 0x218U,
PIN_I3C0_SDA = 0x21CU,
PIN_I2C0_SCL = 0x220U,
PIN_I2C0_SDA = 0x224U,
PIN_I2C1_SCL = 0x228U,
PIN_I2C1_SDA = 0x22CU,
PIN_ECAP0_IN_APWM_OUT = 0x230U,
PIN_EXT_REFCLK1 = 0x234U,
PIN_TIMER_IO0 = 0x238U,
PIN_TIMER_IO1 = 0x23CU,
PIN_MMC1_DAT3 = 0x240U,
PIN_MMC1_DAT2 = 0x244U,
PIN_MMC1_DAT1 = 0x248U,
PIN_MMC1_DAT0 = 0x24CU,
PIN_MMC1_CLK = 0x250U,
PIN_MMC1_CMD = 0x254U,
PIN_MMC1_SDCD = 0x258U,
PIN_MMC1_SDWP = 0x25CU,
PIN_MMC2_DAT3 = 0x260U,
PIN_MMC2_DAT2 = 0x264U,
PIN_MMC2_DAT1 = 0x268U,
PIN_MMC2_DAT0 = 0x26CU,
PIN_MMC2_CLK = 0x270U,
PIN_MMC2_CMD = 0x274U,
PIN_RESETSTATZ = 0x278U,
PIN_PORZ_OUT = 0x27CU,
PIN_SOC_SAFETY_ERRORN = 0x280U,
PIN_TDI = 0x284U,
PIN_TDO = 0x288U,
PIN_TMS = 0x28CU,
PIN_USB0_DRVVBUS = 0x290U,
PIN_MLB0_MLBSP = 0x294U,
PIN_MLB0_MLBSN = 0x298U,
PIN_MLB0_MLBDP = 0x29CU,
PIN_MLB0_MLBDN = 0x2A0U,
PIN_MLB0_MLBCP = 0x2A4U,
PIN_MLB0_MLBCN = 0x2A8U,
PIN_MMC1_CLKLB = 0x2ACU,
PIN_MMC2_CLKLB = 0x2B0U,
};
enum pinWkupOffsets
{
PIN_MCU_OSPI0_CLK = 0x0U,
PIN_MCU_OSPI0_LBCLKO = 0x4U,
PIN_MCU_OSPI0_DQS = 0x8U,
PIN_MCU_OSPI0_D0 = 0xCU,
PIN_MCU_OSPI0_D1 = 0x10U,
PIN_MCU_OSPI0_D2 = 0x14U,
PIN_MCU_OSPI0_D3 = 0x18U,
PIN_MCU_OSPI0_D4 = 0x1CU,
PIN_MCU_OSPI0_D5 = 0x20U,
PIN_MCU_OSPI0_D6 = 0x24U,
PIN_MCU_OSPI0_D7 = 0x28U,
PIN_MCU_OSPI0_CSN0 = 0x2CU,
PIN_MCU_OSPI0_CSN1 = 0x30U,
PIN_MCU_OSPI1_CLK = 0x34U,
PIN_MCU_OSPI1_LBCLKO = 0x38U,
PIN_MCU_OSPI1_DQS = 0x3CU,
PIN_MCU_OSPI1_D0 = 0x40U,
PIN_MCU_OSPI1_D1 = 0x44U,
PIN_MCU_OSPI1_D2 = 0x48U,
PIN_MCU_OSPI1_D3 = 0x4CU,
PIN_MCU_OSPI1_CSN0 = 0x50U,
PIN_MCU_OSPI1_CSN1 = 0x54U,
PIN_MCU_RGMII1_TX_CTL = 0x58U,
PIN_MCU_RGMII1_RX_CTL = 0x5CU,
PIN_MCU_RGMII1_TD3 = 0x60U,
PIN_MCU_RGMII1_TD2 = 0x64U,
PIN_MCU_RGMII1_TD1 = 0x68U,
PIN_MCU_RGMII1_TD0 = 0x6CU,
PIN_MCU_RGMII1_TXC = 0x70U,
PIN_MCU_RGMII1_RXC = 0x74U,
PIN_MCU_RGMII1_RD3 = 0x78U,
PIN_MCU_RGMII1_RD2 = 0x7CU,
PIN_MCU_RGMII1_RD1 = 0x80U,
PIN_MCU_RGMII1_RD0 = 0x84U,
PIN_MCU_MDIO0_MDIO = 0x88U,
PIN_MCU_MDIO0_MDC = 0x8CU,
PIN_MCU_SPI0_CLK = 0x90U,
PIN_MCU_SPI0_D0 = 0x94U,
PIN_MCU_SPI0_D1 = 0x98U,
PIN_MCU_SPI0_CS0 = 0x9CU,
PIN_WKUP_UART0_RXD = 0xA0U,
PIN_WKUP_UART0_TXD = 0xA4U,
PIN_MCU_MCAN0_TX = 0xA8U,
PIN_MCU_MCAN0_RX = 0xACU,
PIN_WKUP_GPIO0_0 = 0xB0U,
PIN_WKUP_GPIO0_1 = 0xB4U,
PIN_WKUP_GPIO0_2 = 0xB8U,
PIN_WKUP_GPIO0_3 = 0xBCU,
PIN_WKUP_GPIO0_4 = 0xC0U,
PIN_WKUP_GPIO0_5 = 0xC4U,
PIN_WKUP_GPIO0_6 = 0xC8U,
PIN_WKUP_GPIO0_7 = 0xCCU,
PIN_WKUP_GPIO0_8 = 0xD0U,
PIN_WKUP_GPIO0_9 = 0xD4U,
PIN_WKUP_GPIO0_10 = 0xD8U,
PIN_WKUP_GPIO0_11 = 0xDCU,
PIN_WKUP_GPIO0_12 = 0xE0U,
PIN_WKUP_GPIO0_13 = 0xE4U,
PIN_WKUP_GPIO0_14 = 0xE8U,
PIN_WKUP_GPIO0_15 = 0xECU,
PIN_MCU_I3C0_SCL = 0xF0U,
PIN_MCU_I3C0_SDA = 0xF4U,
PIN_WKUP_I2C0_SCL = 0xF8U,
PIN_WKUP_I2C0_SDA = 0xFCU,
PIN_MCU_I2C0_SCL = 0x100U,
PIN_MCU_I2C0_SDA = 0x104U,
PIN_PMIC_POWER_EN0 = 0x108U,
PIN_PMIC_POWER_EN1 = 0x10CU,
PIN_MCU_SAFETY_ERRORN = 0x110U,
PIN_MCU_RESETZ = 0x114U,
PIN_MCU_RESETSTATZ = 0x118U,
PIN_MCU_PORZ_OUT = 0x11CU,
PIN_TCK = 0x120U,
PIN_TRSTN = 0x124U,
PIN_EMU0 = 0x128U,
PIN_EMU1 = 0x12CU,
PIN_MCU_ADC0_AIN0 = 0x130U,
PIN_MCU_ADC0_AIN1 = 0x134U,
PIN_MCU_ADC0_AIN2 = 0x138U,
PIN_MCU_ADC0_AIN3 = 0x13CU,
PIN_MCU_ADC0_AIN4 = 0x140U,
PIN_MCU_ADC0_AIN5 = 0x144U,
PIN_MCU_ADC0_AIN6 = 0x148U,
PIN_MCU_ADC0_AIN7 = 0x14CU,
PIN_MCU_ADC1_AIN0 = 0x150U,
PIN_MCU_ADC1_AIN1 = 0x154U,
PIN_MCU_ADC1_AIN2 = 0x158U,
PIN_MCU_ADC1_AIN3 = 0x15CU,
PIN_MCU_ADC1_AIN4 = 0x160U,
PIN_MCU_ADC1_AIN5 = 0x164U,
PIN_MCU_ADC1_AIN6 = 0x168U,
PIN_MCU_ADC1_AIN7 = 0x16CU,
PIN_RESET_REQZ = 0x170U,
PIN_PORZ = 0x174U,
};
/* ========================================================================== */
/* Global Variables */
/* ========================================================================== */
/** \brief Pinmux configuration data for the board. Auto-generated from
Pinmux tool. */
extern pinmuxBoardCfg_t gJ721E_MainPinmuxData[];
extern pinmuxBoardCfg_t gJ721E_WkupPinmuxData[];
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* _J721E_PIN_MUX_H_ */
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment