Last active
February 27, 2020 19:51
-
-
Save RobertCNelson/5bfc006a66d40a9c8453f634d138968c to your computer and use it in GitHub Desktop.
flasher
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2019.04-00003-gf75777da1c (Nov 01 2019 - 09:14:35 -0500) | |
| Trying to boot from MMC1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| U-Boot 2019.04-00003-gf75777da1c (Nov 01 2019 - 09:14:35 -0500), Build: jenkins-github_Bootloader-Builder-134 | |
| CPU : AM335X-GP rev 2.1 | |
| I2C: ready | |
| DRAM: 512 MiB | |
| No match for driver 'omap_hsmmc' | |
| No match for driver 'omap_hsmmc' | |
| Some drivers were not found | |
| Reset Source: Power-on reset has occurred. | |
| RTC 32KCLK Source: External. | |
| MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| Board: BeagleBone Black | |
| <ethaddr> not set. Validating first E-fuse MAC | |
| BeagleBone Black: | |
| Model: BeagleBoard.org BeagleBone Black Wireless: | |
| BeagleBone: cape eeprom: i2c_probe: 0x54: | |
| BeagleBone: cape eeprom: i2c_probe: 0x55: | |
| BeagleBone: cape eeprom: i2c_probe: 0x56: | |
| BeagleBone: cape eeprom: i2c_probe: 0x57: | |
| Net: eth0: MII MODE | |
| Could not get PHY for cpsw: addr 0 | |
| cpsw, usb_ether | |
| Press SPACE to abort autoboot in 2 seconds | |
| board_name=[BBBW] ... | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| gpio: pin 56 (gpio 56) value is 0 | |
| gpio: pin 55 (gpio 55) value is 0 | |
| gpio: pin 54 (gpio 54) value is 0 | |
| gpio: pin 53 (gpio 53) value is 1 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| gpio: pin 54 (gpio 54) value is 1 | |
| Checking for: /uEnv.txt ... | |
| Checking for: /boot.scr ... | |
| Checking for: /boot/boot.scr ... | |
| Checking for: /boot/uEnv.txt ... | |
| gpio: pin 55 (gpio 55) value is 1 | |
| 2131 bytes read in 62 ms (33.2 KiB/s) | |
| Loaded environment from /boot/uEnv.txt | |
| Checking if uname_r is set in /boot/uEnv.txt... | |
| gpio: pin 56 (gpio 56) value is 1 | |
| Running uname_boot ... | |
| loading /boot/vmlinuz-4.19.94-ti-r35 ... | |
| 10347008 bytes read in 710 ms (13.9 MiB/s) | |
| debug: [enable_uboot_overlays=1] ... | |
| debug: [enable_uboot_cape_universal=1] ... | |
| debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... | |
| uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... | |
| uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... | |
| loading /boot/dtbs/4.19.94-ti-r35/am335x-boneblack-uboot-univ.dtb ... | |
| 162266 bytes read in 152 ms (1 MiB/s) | |
| uboot_overlays: [fdt_buffer=0x60000] ... | |
| uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... | |
| 1584 bytes read in 247 ms (5.9 KiB/s) | |
| uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... | |
| 4915 bytes read in 378 ms (12.7 KiB/s) | |
| uboot_overlays: loading /lib/firmware/BB-BBBW-WL1835-00A0.dtbo ... | |
| 4156 bytes read in 412 ms (9.8 KiB/s) | |
| uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... | |
| 867 bytes read in 214 ms (3.9 KiB/s) | |
| uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ... | |
| 3801 bytes read in 319 ms (10.7 KiB/s) | |
| loading /boot/initrd.img-4.19.94-ti-r35 ... | |
| 7344514 bytes read in 516 ms (13.6 MiB/s) | |
| debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh] ... | |
| debug: [bootz 0x82000000 0x88080000:701182 88000000] ... | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Ramdisk to 8f8fe000, end 8ffff182 ... OK | |
| Loading Device Tree to 8f872000, end 8f8fdfff ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 4.19.94-ti-r35 (voodoo@x2-am57xx-beagle-x15-2gb) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Fri Feb 7 15:33:32 UTC 2020 | |
| [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black Wireless | |
| [ 0.000000] Memory policy: Data cache writeback | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 | |
| [ 0.000000] CPU: All CPU(s) started in SVC mode. | |
| [ 0.000000] AM335X ES2.1 (sgx neon) | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x508 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 17 pages/cpu s39628 r8192 d21812 u69632 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
| [ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh | |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| [ 0.000000] Memory: 437640K/522240K available (13312K kernel code, 1156K rwdata, 4452K rodata, 1024K init, 349K bss, 35448K reserved, 49152K cma-reserved, 0K highmem) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) | |
| [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) | |
| [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (14304 kB) | |
| [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) | |
| [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1157 kB) | |
| [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 350 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] ftrace: allocating 42644 entries in 126 pages | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
| [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
| [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz | |
| [ 0.000026] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
| [ 0.000055] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.000071] OMAP clocksource: timer1 at 24000000 Hz | |
| [ 0.002149] timer_probe: no matching timers found | |
| [ 0.002506] Console: colour dummy device 80x30 | |
| [ 0.002543] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
| [ 0.002553] This ensures that you still see kernel messages. Please | |
| [ 0.002560] update your kernel commandline. | |
| [ 0.002624] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) | |
| [ 0.021044] pid_max: default: 32768 minimum: 301 | |
| [ 0.021333] Security Framework initialized | |
| [ 0.021353] Yama: becoming mindful. | |
| [ 0.021501] AppArmor: AppArmor initialized | |
| [ 0.021626] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.021642] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.022747] CPU: Testing write buffer coherency: ok | |
| [ 0.022820] CPU0: Spectre v2: using BPIALL workaround | |
| [ 0.023319] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
| [ 0.045134] Setting up static identity map for 0x80100000 - 0x80100060 | |
| [ 0.053043] rcu: Hierarchical SRCU implementation. | |
| [ 0.064371] EFI services will not be available. | |
| [ 0.069050] smp: Bringing up secondary CPUs ... | |
| [ 0.069070] smp: Brought up 1 node, 1 CPU | |
| [ 0.069082] SMP: Total of 1 processors activated (995.32 BogoMIPS). | |
| [ 0.069092] CPU: All CPU(s) started in SVC mode. | |
| [ 0.070848] devtmpfs: initialized | |
| [ 0.105396] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
| [ 0.106075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.106105] futex hash table entries: 256 (order: 2, 16384 bytes) | |
| [ 0.110060] xor: measuring software checksum speed | |
| [ 0.149016] arm4regs : 1217.000 MB/sec | |
| [ 0.189014] 8regs : 1091.000 MB/sec | |
| [ 0.229013] 32regs : 1088.000 MB/sec | |
| [ 0.269013] neon : 1657.000 MB/sec | |
| [ 0.269024] xor: using function: neon (1657.000 MB/sec) | |
| [ 0.269045] pinctrl core: initialized pinctrl subsystem | |
| [ 0.270458] NET: Registered protocol family 16 | |
| [ 0.275813] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.373135] l4_wkup_cm:clk:0010:0: failed to disable | |
| [ 0.413492] audit: initializing netlink subsys (disabled) | |
| [ 0.414796] cpuidle: using governor menu | |
| [ 0.421130] audit: type=2000 audit(0.404:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.423092] OMAP GPIO hardware version 0.1 | |
| [ 0.426180] GPIO line 106 (LS_BUF_EN) hogged as output/high | |
| [ 0.446969] No ATAGs? | |
| [ 0.446982] hw-breakpoint: debug architecture 0x4 unsupported. | |
| [ 0.477205] raid6: using algorithm neonx8 gen() 0 MB/s | |
| [ 0.477227] raid6: .... xor() 0 MB/s, rmw enabled | |
| [ 0.477238] raid6: using neon recovery algorithm | |
| [ 0.485317] edma 49000000.edma: TI EDMA DMA engine driver | |
| [ 0.492532] SCSI subsystem initialized | |
| [ 0.493513] usbcore: registered new interface driver usbfs | |
| [ 0.493578] usbcore: registered new interface driver hub | |
| [ 0.493703] usbcore: registered new device driver usb | |
| [ 0.495777] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
| [ 0.497406] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
| [ 0.497841] media: Linux media interface: v0.10 | |
| [ 0.497899] videodev: Linux video capture interface: v2.00 | |
| [ 0.498081] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.498093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.498118] PTP clock support registered | |
| [ 0.498809] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
| [ 0.501493] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.502331] NetLabel: Initializing | |
| [ 0.502348] NetLabel: domain hash size = 128 | |
| [ 0.502356] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| [ 0.502473] NetLabel: unlabeled traffic allowed by default | |
| [ 0.503556] clocksource: Switched to clocksource timer1 | |
| [ 0.665355] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.665471] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.666356] AppArmor: AppArmor Filesystem Enabled | |
| [ 0.679374] NET: Registered protocol family 2 | |
| [ 0.680621] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) | |
| [ 0.680666] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.680713] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.680773] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.680918] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.680945] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.681166] NET: Registered protocol family 1 | |
| [ 0.694380] RPC: Registered named UNIX socket transport module. | |
| [ 0.694403] RPC: Registered udp transport module. | |
| [ 0.694412] RPC: Registered tcp transport module. | |
| [ 0.694420] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.695240] Unpacking initramfs... | |
| [ 1.019627] random: fast init done | |
| [ 1.105700] Freeing initrd memory: 7176K | |
| [ 1.106524] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
| [ 1.109771] Initialise system trusted keyrings | |
| [ 1.110218] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
| [ 1.117629] zbud: loaded | |
| [ 1.125149] NFS: Registering the id_resolver key type | |
| [ 1.125207] Key type id_resolver registered | |
| [ 1.125217] Key type id_legacy registered | |
| [ 1.125242] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.125609] fuse init (API version 7.27) | |
| [ 1.136133] Key type asymmetric registered | |
| [ 1.136159] Asymmetric key parser 'x509' registered | |
| [ 1.136273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 1.140651] io scheduler noop registered | |
| [ 1.140672] io scheduler deadline registered | |
| [ 1.140971] io scheduler cfq registered (default) | |
| [ 1.140985] io scheduler mq-deadline registered | |
| [ 1.145120] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
| [ 1.158363] gpio-of-helper ocp:cape-universal: ready | |
| [ 1.170407] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle | |
| [ 1.178908] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
| [ 1.182623] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 | |
| [ 2.002244] console [ttyS0] enabled | |
| [ 2.006979] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250 | |
| [ 2.016902] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250 | |
| [ 2.026903] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250 | |
| [ 2.036799] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250 | |
| [ 2.046688] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250 | |
| [ 2.059217] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
| [ 2.065899] random: crng init done | |
| [ 2.195258] eqep 48300180.eqep: ver. 1.0 | |
| [ 2.199606] eqep 48300180.eqep: count_mode:0 | |
| [ 2.203938] eqep 48300180.eqep: invert_qa:1 | |
| [ 2.208167] eqep 48300180.eqep: invert_qb:1 | |
| [ 2.212393] eqep 48300180.eqep: invert_qi:0 | |
| [ 2.216617] eqep 48300180.eqep: invert_qs:0 | |
| [ 2.220843] eqep 48300180.eqep: swap_inputs:0 | |
| [ 2.225241] eqep 48300180.eqep: QDECCTL:0x0180 | |
| [ 2.229727] eqep 48300180.eqep: QPOSINIT:0x00000000 | |
| [ 2.234648] eqep 48300180.eqep: QPOSMAX:0xffffffff | |
| [ 2.239482] eqep 48300180.eqep: QPOSCNT:0x00000000 | |
| [ 2.244319] eqep 48300180.eqep: omit_interrupt:0 | |
| [ 2.248978] eqep 48300180.eqep: QEINT:0x0800 | |
| [ 2.253288] eqep 48300180.eqep: QUPRD:0x05f5e100 | |
| [ 2.257948] eqep 48300180.eqep: QEPCTL:0x009e write | |
| [ 2.262868] eqep 48300180.eqep: QEPCTL:0x009e read | |
| [ 2.267718] eqep 48300180.eqep: irq:135, clk_rate:100000000 | |
| [ 2.273628] eqep 48302180.eqep: ver. 1.0 | |
| [ 2.277760] eqep 48302180.eqep: count_mode:0 | |
| [ 2.282094] eqep 48302180.eqep: invert_qa:1 | |
| [ 2.286323] eqep 48302180.eqep: invert_qb:1 | |
| [ 2.290549] eqep 48302180.eqep: invert_qi:0 | |
| [ 2.294774] eqep 48302180.eqep: invert_qs:0 | |
| [ 2.298999] eqep 48302180.eqep: swap_inputs:0 | |
| [ 2.303397] eqep 48302180.eqep: QDECCTL:0x0180 | |
| [ 2.307883] eqep 48302180.eqep: QPOSINIT:0x00000000 | |
| [ 2.312805] eqep 48302180.eqep: QPOSMAX:0xffffffff | |
| [ 2.317638] eqep 48302180.eqep: QPOSCNT:0x00000000 | |
| [ 2.322472] eqep 48302180.eqep: omit_interrupt:0 | |
| [ 2.327131] eqep 48302180.eqep: QEINT:0x0800 | |
| [ 2.331441] eqep 48302180.eqep: QUPRD:0x05f5e100 | |
| [ 2.336108] eqep 48302180.eqep: QEPCTL:0x009e write | |
| [ 2.341029] eqep 48302180.eqep: QEPCTL:0x009e read | |
| [ 2.345877] eqep 48302180.eqep: irq:137, clk_rate:100000000 | |
| [ 2.351738] eqep 48304180.eqep: ver. 1.0 | |
| [ 2.355836] eqep 48304180.eqep: count_mode:0 | |
| [ 2.360163] eqep 48304180.eqep: invert_qa:1 | |
| [ 2.364391] eqep 48304180.eqep: invert_qb:1 | |
| [ 2.368617] eqep 48304180.eqep: invert_qi:0 | |
| [ 2.372842] eqep 48304180.eqep: invert_qs:0 | |
| [ 2.377065] eqep 48304180.eqep: swap_inputs:0 | |
| [ 2.381463] eqep 48304180.eqep: QDECCTL:0x0180 | |
| [ 2.385949] eqep 48304180.eqep: QPOSINIT:0x00000000 | |
| [ 2.390870] eqep 48304180.eqep: QPOSMAX:0xffffffff | |
| [ 2.395704] eqep 48304180.eqep: QPOSCNT:0x00000000 | |
| [ 2.400538] eqep 48304180.eqep: omit_interrupt:0 | |
| [ 2.405198] eqep 48304180.eqep: QEINT:0x0800 | |
| [ 2.409509] eqep 48304180.eqep: QUPRD:0x05f5e100 | |
| [ 2.414168] eqep 48304180.eqep: QEPCTL:0x009e write | |
| [ 2.419090] eqep 48304180.eqep: QEPCTL:0x009e read | |
| [ 2.423934] eqep 48304180.eqep: irq:139, clk_rate:100000000 | |
| [ 2.474983] libphy: Fixed MDIO Bus: probed | |
| [ 2.481837] usbcore: registered new interface driver smsc95xx | |
| [ 2.489395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.496080] ehci-platform: EHCI generic platform driver | |
| [ 2.501803] ehci-omap: OMAP-EHCI Host Controller driver | |
| [ 2.508196] usbcore: registered new interface driver usb-storage | |
| [ 2.517835] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator | |
| [ 2.528036] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 | |
| [ 2.539192] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator | |
| [ 2.549374] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 | |
| [ 2.560603] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
| [ 2.566037] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
| [ 2.573845] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
| [ 2.582192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.589472] usb usb1: Product: MUSB HDRC host driver | |
| [ 2.594481] usb usb1: Manufacturer: Linux 4.19.94-ti-r35 musb-hcd | |
| [ 2.600624] usb usb1: SerialNumber: musb-hdrc.1 | |
| [ 2.606033] hub 1-0:1.0: USB hub found | |
| [ 2.609985] hub 1-0:1.0: 1 port detected | |
| [ 2.626523] omap_rtc 44e3e000.rtc: registered as rtc0 | |
| [ 2.633425] i2c /dev entries driver | |
| [ 2.638218] Driver for 1-wire Dallas network protocol. | |
| [ 2.646686] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
| [ 2.654349] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| [ 2.665067] cpuidle: enable-method property 'ti,am3352' found operations | |
| [ 2.672902] sdhci: Secure Digital Host Controller Interface driver | |
| [ 2.679190] sdhci: Copyright(c) Pierre Ossman | |
| [ 2.684708] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
| [ 2.693556] omap_hsmmc 48060000.mmc: Got CD GPIO | |
| [ 2.698893] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.2 | |
| [ 2.733794] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.2 | |
| [ 2.767198] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.1 | |
| [ 2.777765] mmc0: host does not support reading read-only switch, assuming write-enable | |
| [ 2.787892] mmc0: new high speed SDHC card at address 0007 | |
| [ 2.799252] mmcblk0: mmc0:0007 SD8GB 7.42 GiB | |
| [ 2.809913] mmcblk0: p1 | |
| [ 2.833824] mmc1: new high speed MMC card at address 0001 | |
| [ 2.844930] mmcblk1: mmc1:0001 M62704 3.56 GiB | |
| [ 2.850237] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB | |
| [ 2.856944] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB | |
| [ 2.863274] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (242:0) | |
| [ 2.884165] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 2.893334] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.900124] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
| [ 2.906424] omap-aes 53500000.aes: will run requests pump with realtime priority | |
| [ 2.913941] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range | |
| [ 2.925303] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
| [ 2.935483] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.942276] usbcore: registered new interface driver usbhid | |
| [ 2.948093] usbhid: USB HID core driver | |
| [ 2.953633] remoteproc remoteproc0: wkup_m3 is available | |
| [ 2.961143] remoteproc remoteproc1: 4a334000.pru is available | |
| [ 2.967183] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully | |
| [ 2.975388] remoteproc remoteproc2: 4a338000.pru is available | |
| [ 2.981439] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully | |
| [ 2.991865] mmc2: new high speed SDIO card at address 0001 | |
| [ 3.003148] gnss: GNSS driver registered with major 239 | |
| [ 3.016008] wireguard: WireGuard 0.0.20191219 loaded. See www.wireguard.com for information. | |
| [ 3.024625] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 3.035366] NET: Registered protocol family 10 | |
| [ 3.111134] Segment Routing with IPv6 | |
| [ 3.115384] mip6: Mobile IPv6 | |
| [ 3.118662] NET: Registered protocol family 17 | |
| [ 3.123451] Key type dns_resolver registered | |
| [ 3.127834] mpls_gso: MPLS GSO support | |
| [ 3.131932] ThumbEE CPU extension supported. | |
| [ 3.136274] Registering SWP/SWPB emulation handler | |
| [ 3.141116] omap_voltage_late_init: Voltage driver support not added | |
| [ 3.148130] PM: Cannot get wkup_m3_ipc handle | |
| [ 3.153857] registered taskstats version 1 | |
| [ 3.158056] Loading compiled-in X.509 certificates | |
| [ 3.163038] zswap: loaded using pool lzo/zbud | |
| [ 3.170559] Btrfs loaded, crc32c=crc32c-generic | |
| [ 3.175315] AppArmor: AppArmor sha1 policy hashing enabled | |
| [ 3.346331] tda998x 0-0070: found TDA19988 | |
| [ 3.354264] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) | |
| [ 3.360433] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 3.367105] [drm] No driver support for vblank timestamp query. | |
| [ 3.373590] [drm] Cannot find any crtc or sizes | |
| [ 3.379040] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 | |
| [ 3.400773] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set | |
| [ 3.407987] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 | |
| [ 3.419359] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
| [ 3.425625] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| [ 3.432705] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
| [ 3.440330] remoteproc remoteproc0: powering up wkup_m3 | |
| [ 3.449086] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 | |
| [ 3.457445] cpu cpu0: Linked as a consumer to regulator.4 | |
| [ 3.463196] remoteproc remoteproc0: remote processor wkup_m3 is now up | |
| [ 3.463215] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 | |
| [ 3.476846] cpu cpu0: Dropping the link to regulator.4 | |
| [ 3.482606] cpu cpu0: Linked as a consumer to regulator.4 | |
| [ 3.491328] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok | |
| [ 3.500747] PM: bootloader does not support rtc-only! | |
| [ 3.507404] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) | |
| [ 3.517813] ALSA device list: | |
| [ 3.521009] #0: TI BeagleBone Black | |
| [ 3.531212] Freeing unused kernel memory: 1024K | |
| [ 3.536587] Run /init as init process | |
| Loading, please wait... |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500) | |
| Trying to boot from MMC2 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| U-Boot 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500), Build: jenkins-github_Bootloader-Builder-134 | |
| CPU : AM335X-GP rev 2.1 | |
| I2C: ready | |
| DRAM: 512 MiB | |
| No match for driver 'omap_hsmmc' | |
| No match for driver 'omap_hsmmc' | |
| Some drivers were not found | |
| Reset Source: Power-on reset has occurred. | |
| RTC 32KCLK Source: External. | |
| MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| Board: BeagleBone Black | |
| <ethaddr> not set. Validating first E-fuse MAC | |
| BeagleBone Black: | |
| Model: SeeedStudio BeagleBone Green Wireless: | |
| BeagleBone: cape eeprom: i2c_probe: 0x54: | |
| BeagleBone: cape eeprom: i2c_probe: 0x55: | |
| BeagleBone: cape eeprom: i2c_probe: 0x56: | |
| BeagleBone: cape eeprom: i2c_probe: 0x57: | |
| Net: eth0: MII MODE | |
| Could not get PHY for cpsw: addr 0 | |
| cpsw, usb_ether | |
| Press SPACE to abort autoboot in 0 seconds | |
| board_name=[A335BNLT] ... | |
| board_rev=[GW1A] ... | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| gpio: pin 56 (gpio 56) value is 0 | |
| gpio: pin 55 (gpio 55) value is 0 | |
| gpio: pin 54 (gpio 54) value is 0 | |
| gpio: pin 53 (gpio 53) value is 1 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| gpio: pin 54 (gpio 54) value is 1 | |
| Checking for: /uEnv.txt ... | |
| Checking for: /boot.scr ... | |
| Checking for: /boot/boot.scr ... | |
| Checking for: /boot/uEnv.txt ... | |
| gpio: pin 55 (gpio 55) value is 1 | |
| 2131 bytes read in 62 ms (33.2 KiB/s) | |
| Loaded environment from /boot/uEnv.txt | |
| Checking if uname_r is set in /boot/uEnv.txt... | |
| gpio: pin 56 (gpio 56) value is 1 | |
| Running uname_boot ... | |
| loading /boot/vmlinuz-4.19.94-ti-r35 ... | |
| 10347008 bytes read in 710 ms (13.9 MiB/s) | |
| debug: [enable_uboot_overlays=1] ... | |
| debug: [enable_uboot_cape_universal=1] ... | |
| debug: [uboot_base_dtb_univ=am335x-bonegreen-wireless-uboot-univ.dtb] ... | |
| uboot_overlays: [uboot_base_dtb=am335x-bonegreen-wireless-uboot-univ.dtb] ... | |
| uboot_overlays: Switching too: dtb=am335x-bonegreen-wireless-uboot-univ.dtb ... | |
| loading /boot/dtbs/4.19.94-ti-r35/am335x-bonegreen-wireless-uboot-univ.dtb ... | |
| 156845 bytes read in 117 ms (1.3 MiB/s) | |
| uboot_overlays: [fdt_buffer=0x60000] ... | |
| uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... | |
| 1584 bytes read in 247 ms (5.9 KiB/s) | |
| uboot_overlays: loading /lib/firmware/BB-BBGW-WL1835-00A0.dtbo ... | |
| 4785 bytes read in 551 ms (7.8 KiB/s) | |
| uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... | |
| 867 bytes read in 214 ms (3.9 KiB/s) | |
| uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ... | |
| 3801 bytes read in 320 ms (10.7 KiB/s) | |
| loading /boot/initrd.img-4.19.94-ti-r35 ... | |
| 7344514 bytes read in 515 ms (13.6 MiB/s) | |
| debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh] ... | |
| debug: [bootz 0x82000000 0x88080000:701182 88000000] ... | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Ramdisk to 8f8fe000, end 8ffff182 ... OK | |
| Loading Device Tree to 8f873000, end 8f8fdfff ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 4.19.94-ti-r35 (voodoo@x2-am57xx-beagle-x15-2gb) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Fri Feb 7 15:33:32 UTC 2020 | |
| [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green Wireless | |
| [ 0.000000] Memory policy: Data cache writeback | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 | |
| [ 0.000000] CPU: All CPU(s) started in SVC mode. | |
| [ 0.000000] AM335X ES2.1 (sgx neon) | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x508 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 17 pages/cpu s39628 r8192 d21812 u69632 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
| [ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh | |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| [ 0.000000] Memory: 437672K/522240K available (13312K kernel code, 1156K rwdata, 4452K rodata, 1024K init, 349K bss, 35416K reserved, 49152K cma-reserved, 0K highmem) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) | |
| [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) | |
| [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (14304 kB) | |
| [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) | |
| [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1157 kB) | |
| [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 350 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] ftrace: allocating 42644 entries in 126 pages | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
| [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
| [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz | |
| [ 0.000027] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
| [ 0.000057] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.000072] OMAP clocksource: timer1 at 24000000 Hz | |
| [ 0.002030] timer_probe: no matching timers found | |
| [ 0.002380] Console: colour dummy device 80x30 | |
| [ 0.002417] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
| [ 0.002426] This ensures that you still see kernel messages. Please | |
| [ 0.002434] update your kernel commandline. | |
| [ 0.002498] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) | |
| [ 0.021219] pid_max: default: 32768 minimum: 301 | |
| [ 0.021510] Security Framework initialized | |
| [ 0.021531] Yama: becoming mindful. | |
| [ 0.021681] AppArmor: AppArmor initialized | |
| [ 0.021801] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.021816] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.022938] CPU: Testing write buffer coherency: ok | |
| [ 0.023014] CPU0: Spectre v2: using BPIALL workaround | |
| [ 0.023512] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
| [ 0.045303] Setting up static identity map for 0x80100000 - 0x80100060 | |
| [ 0.053217] rcu: Hierarchical SRCU implementation. | |
| [ 0.064544] EFI services will not be available. | |
| [ 0.069225] smp: Bringing up secondary CPUs ... | |
| [ 0.069245] smp: Brought up 1 node, 1 CPU | |
| [ 0.069256] SMP: Total of 1 processors activated (995.32 BogoMIPS). | |
| [ 0.069266] CPU: All CPU(s) started in SVC mode. | |
| [ 0.071003] devtmpfs: initialized | |
| [ 0.105527] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
| [ 0.106189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.106220] futex hash table entries: 256 (order: 2, 16384 bytes) | |
| [ 0.110179] xor: measuring software checksum speed | |
| [ 0.149194] arm4regs : 1217.000 MB/sec | |
| [ 0.189189] 8regs : 1091.000 MB/sec | |
| [ 0.229188] 32regs : 1088.000 MB/sec | |
| [ 0.269189] neon : 1657.000 MB/sec | |
| [ 0.269199] xor: using function: neon (1657.000 MB/sec) | |
| [ 0.269219] pinctrl core: initialized pinctrl subsystem | |
| [ 0.270619] NET: Registered protocol family 16 | |
| [ 0.275966] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.368050] l4_wkup_cm:clk:0010:0: failed to disable | |
| [ 0.408322] audit: initializing netlink subsys (disabled) | |
| [ 0.409726] cpuidle: using governor menu | |
| [ 0.413320] audit: type=2000 audit(0.400:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.417611] OMAP GPIO hardware version 0.1 | |
| [ 0.418473] GPIO line 61 (LS_BUF_EN) hogged as output/high | |
| [ 0.420623] GPIO line 112 (MCASP0_AHCLKR) hogged as output/low | |
| [ 0.442024] No ATAGs? | |
| [ 0.442038] hw-breakpoint: debug architecture 0x4 unsupported. | |
| [ 0.469373] raid6: using algorithm neonx8 gen() 0 MB/s | |
| [ 0.469396] raid6: .... xor() 0 MB/s, rmw enabled | |
| [ 0.469406] raid6: using neon recovery algorithm | |
| [ 0.477529] edma 49000000.edma: TI EDMA DMA engine driver | |
| [ 0.484775] SCSI subsystem initialized | |
| [ 0.489640] usbcore: registered new interface driver usbfs | |
| [ 0.489710] usbcore: registered new interface driver hub | |
| [ 0.489843] usbcore: registered new device driver usb | |
| [ 0.491894] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
| [ 0.493461] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
| [ 0.493939] media: Linux media interface: v0.10 | |
| [ 0.494001] videodev: Linux video capture interface: v2.00 | |
| [ 0.494162] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.494173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.494199] PTP clock support registered | |
| [ 0.494880] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
| [ 0.497604] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.498480] NetLabel: Initializing | |
| [ 0.498496] NetLabel: domain hash size = 128 | |
| [ 0.498504] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| [ 0.498596] NetLabel: unlabeled traffic allowed by default | |
| [ 0.499668] clocksource: Switched to clocksource timer1 | |
| [ 0.661065] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.661180] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.662057] AppArmor: AppArmor Filesystem Enabled | |
| [ 0.675204] NET: Registered protocol family 2 | |
| [ 0.676467] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) | |
| [ 0.676521] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.676566] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.676628] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.676767] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.676794] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.677014] NET: Registered protocol family 1 | |
| [ 0.690228] RPC: Registered named UNIX socket transport module. | |
| [ 0.690252] RPC: Registered udp transport module. | |
| [ 0.690260] RPC: Registered tcp transport module. | |
| [ 0.690268] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.691113] Unpacking initramfs... | |
| [ 1.015739] random: fast init done | |
| [ 1.100978] Freeing initrd memory: 7176K | |
| [ 1.101777] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
| [ 1.105107] Initialise system trusted keyrings | |
| [ 1.105543] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
| [ 1.112857] zbud: loaded | |
| [ 1.120290] NFS: Registering the id_resolver key type | |
| [ 1.120344] Key type id_resolver registered | |
| [ 1.120355] Key type id_legacy registered | |
| [ 1.120378] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.120745] fuse init (API version 7.27) | |
| [ 1.131214] Key type asymmetric registered | |
| [ 1.131238] Asymmetric key parser 'x509' registered | |
| [ 1.131352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 1.135822] io scheduler noop registered | |
| [ 1.135842] io scheduler deadline registered | |
| [ 1.136159] io scheduler cfq registered (default) | |
| [ 1.136175] io scheduler mq-deadline registered | |
| [ 1.140648] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
| [ 1.153313] gpio-of-helper ocp:cape-universal: ready | |
| [ 1.164960] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle | |
| [ 1.173502] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
| [ 1.177276] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 | |
| [ 2.002704] console [ttyS0] enabled | |
| [ 2.007412] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250 | |
| [ 2.017337] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250 | |
| [ 2.027344] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250 | |
| [ 2.037249] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250 | |
| [ 2.047127] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250 | |
| [ 2.059779] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
| [ 2.066385] random: crng init done | |
| [ 2.194694] eqep 48300180.eqep: ver. 1.0 | |
| [ 2.198991] eqep 48300180.eqep: count_mode:0 | |
| [ 2.203336] eqep 48300180.eqep: invert_qa:1 | |
| [ 2.207566] eqep 48300180.eqep: invert_qb:1 | |
| [ 2.211794] eqep 48300180.eqep: invert_qi:0 | |
| [ 2.216019] eqep 48300180.eqep: invert_qs:0 | |
| [ 2.220245] eqep 48300180.eqep: swap_inputs:0 | |
| [ 2.224644] eqep 48300180.eqep: QDECCTL:0x0180 | |
| [ 2.229131] eqep 48300180.eqep: QPOSINIT:0x00000000 | |
| [ 2.234052] eqep 48300180.eqep: QPOSMAX:0xffffffff | |
| [ 2.238886] eqep 48300180.eqep: QPOSCNT:0x00000000 | |
| [ 2.243721] eqep 48300180.eqep: omit_interrupt:0 | |
| [ 2.248381] eqep 48300180.eqep: QEINT:0x0800 | |
| [ 2.252691] eqep 48300180.eqep: QUPRD:0x05f5e100 | |
| [ 2.257352] eqep 48300180.eqep: QEPCTL:0x009e write | |
| [ 2.262273] eqep 48300180.eqep: QEPCTL:0x009e read | |
| [ 2.267124] eqep 48300180.eqep: irq:128, clk_rate:100000000 | |
| [ 2.273033] eqep 48302180.eqep: ver. 1.0 | |
| [ 2.277176] eqep 48302180.eqep: count_mode:0 | |
| [ 2.281514] eqep 48302180.eqep: invert_qa:1 | |
| [ 2.285742] eqep 48302180.eqep: invert_qb:1 | |
| [ 2.289968] eqep 48302180.eqep: invert_qi:0 | |
| [ 2.294194] eqep 48302180.eqep: invert_qs:0 | |
| [ 2.298419] eqep 48302180.eqep: swap_inputs:0 | |
| [ 2.302816] eqep 48302180.eqep: QDECCTL:0x0180 | |
| [ 2.307302] eqep 48302180.eqep: QPOSINIT:0x00000000 | |
| [ 2.312223] eqep 48302180.eqep: QPOSMAX:0xffffffff | |
| [ 2.317058] eqep 48302180.eqep: QPOSCNT:0x00000000 | |
| [ 2.321892] eqep 48302180.eqep: omit_interrupt:0 | |
| [ 2.326552] eqep 48302180.eqep: QEINT:0x0800 | |
| [ 2.330862] eqep 48302180.eqep: QUPRD:0x05f5e100 | |
| [ 2.335520] eqep 48302180.eqep: QEPCTL:0x009e write | |
| [ 2.340442] eqep 48302180.eqep: QEPCTL:0x009e read | |
| [ 2.345288] eqep 48302180.eqep: irq:130, clk_rate:100000000 | |
| [ 2.351121] eqep 48304180.eqep: ver. 1.0 | |
| [ 2.355221] eqep 48304180.eqep: count_mode:0 | |
| [ 2.359557] eqep 48304180.eqep: invert_qa:1 | |
| [ 2.363786] eqep 48304180.eqep: invert_qb:1 | |
| [ 2.368012] eqep 48304180.eqep: invert_qi:0 | |
| [ 2.372237] eqep 48304180.eqep: invert_qs:0 | |
| [ 2.376462] eqep 48304180.eqep: swap_inputs:0 | |
| [ 2.380860] eqep 48304180.eqep: QDECCTL:0x0180 | |
| [ 2.385345] eqep 48304180.eqep: QPOSINIT:0x00000000 | |
| [ 2.390266] eqep 48304180.eqep: QPOSMAX:0xffffffff | |
| [ 2.395099] eqep 48304180.eqep: QPOSCNT:0x00000000 | |
| [ 2.399935] eqep 48304180.eqep: omit_interrupt:0 | |
| [ 2.404594] eqep 48304180.eqep: QEINT:0x0800 | |
| [ 2.408905] eqep 48304180.eqep: QUPRD:0x05f5e100 | |
| [ 2.413563] eqep 48304180.eqep: QEPCTL:0x009e write | |
| [ 2.418484] eqep 48304180.eqep: QEPCTL:0x009e read | |
| [ 2.423329] eqep 48304180.eqep: irq:132, clk_rate:100000000 | |
| [ 2.500341] libphy: Fixed MDIO Bus: probed | |
| [ 2.507107] usbcore: registered new interface driver smsc95xx | |
| [ 2.514776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.521463] ehci-platform: EHCI generic platform driver | |
| [ 2.527187] ehci-omap: OMAP-EHCI Host Controller driver | |
| [ 2.533571] usbcore: registered new interface driver usb-storage | |
| [ 2.543135] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator | |
| [ 2.553314] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 | |
| [ 2.564555] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator | |
| [ 2.574688] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 | |
| [ 2.585926] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
| [ 2.591410] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
| [ 2.599234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
| [ 2.607583] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.614866] usb usb1: Product: MUSB HDRC host driver | |
| [ 2.619877] usb usb1: Manufacturer: Linux 4.19.94-ti-r35 musb-hcd | |
| [ 2.626019] usb usb1: SerialNumber: musb-hdrc.1 | |
| [ 2.631433] hub 1-0:1.0: USB hub found | |
| [ 2.635388] hub 1-0:1.0: 1 port detected | |
| [ 2.651972] omap_rtc 44e3e000.rtc: registered as rtc0 | |
| [ 2.658859] i2c /dev entries driver | |
| [ 2.663793] Driver for 1-wire Dallas network protocol. | |
| [ 2.672239] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
| [ 2.680000] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| [ 2.690786] cpuidle: enable-method property 'ti,am3352' found operations | |
| [ 2.698782] sdhci: Secure Digital Host Controller Interface driver | |
| [ 2.705169] sdhci: Copyright(c) Pierre Ossman | |
| [ 2.711011] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
| [ 2.719866] omap_hsmmc 48060000.mmc: Got CD GPIO | |
| [ 2.725193] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.2 | |
| [ 2.758508] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.2 | |
| [ 2.794523] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.1 | |
| [ 2.801511] mmc0: host does not support reading read-only switch, assuming write-enable | |
| [ 2.811975] mmc0: new high speed SDHC card at address 0007 | |
| [ 2.823844] mmcblk0: mmc0:0007 SD8GB 7.42 GiB | |
| [ 2.834773] mmcblk0: p1 | |
| [ 2.861555] mmc1: new high speed MMC card at address 0001 | |
| [ 2.872782] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB | |
| [ 2.878095] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB | |
| [ 2.884719] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB | |
| [ 2.891109] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB, chardev (242:0) | |
| [ 2.900095] mmcblk1: p1 | |
| [ 2.916477] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 2.926258] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.933190] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range | |
| [ 2.941416] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
| [ 2.947736] omap-aes 53500000.aes: will run requests pump with realtime priority | |
| [ 2.958249] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
| [ 2.969034] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.975640] usbcore: registered new interface driver usbhid | |
| [ 2.981814] usbhid: USB HID core driver | |
| [ 2.987293] remoteproc remoteproc0: wkup_m3 is available | |
| [ 2.996853] mmc2: new high speed SDIO card at address 0001 | |
| [ 3.003102] remoteproc remoteproc1: 4a334000.pru is available | |
| [ 3.010002] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully | |
| [ 3.018235] remoteproc remoteproc2: 4a338000.pru is available | |
| [ 3.024183] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully | |
| [ 3.036899] gnss: GNSS driver registered with major 239 | |
| [ 3.047148] wireguard: WireGuard 0.0.20191219 loaded. See www.wireguard.com for information. | |
| [ 3.055860] usb 1-1: new high-speed USB device number 2 using musb-hdrc | |
| [ 3.062593] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 3.073560] NET: Registered protocol family 10 | |
| [ 3.150027] Segment Routing with IPv6 | |
| [ 3.154153] mip6: Mobile IPv6 | |
| [ 3.157360] NET: Registered protocol family 17 | |
| [ 3.162070] Key type dns_resolver registered | |
| [ 3.166448] mpls_gso: MPLS GSO support | |
| [ 3.170539] ThumbEE CPU extension supported. | |
| [ 3.174883] Registering SWP/SWPB emulation handler | |
| [ 3.179727] omap_voltage_late_init: Voltage driver support not added | |
| [ 3.186761] PM: Cannot get wkup_m3_ipc handle | |
| [ 3.192543] registered taskstats version 1 | |
| [ 3.196732] Loading compiled-in X.509 certificates | |
| [ 3.201855] zswap: loaded using pool lzo/zbud | |
| [ 3.209506] Btrfs loaded, crc32c=crc32c-generic | |
| [ 3.214249] AppArmor: AppArmor sha1 policy hashing enabled | |
| [ 3.225425] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
| [ 3.239784] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| [ 3.252093] usb 1-1: Product: USB2.0 Hub | |
| [ 3.259168] hub 1-1:1.0: USB hub found | |
| [ 3.264931] hub 1-1:1.0: 4 ports detected | |
| [ 3.301145] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set | |
| [ 3.308374] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 | |
| [ 3.319801] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
| [ 3.326044] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| [ 3.333118] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
| [ 3.340677] remoteproc remoteproc0: powering up wkup_m3 | |
| [ 3.349520] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 | |
| [ 3.357889] cpu cpu0: Linked as a consumer to regulator.4 | |
| [ 3.363687] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 | |
| [ 3.370780] cpu cpu0: Dropping the link to regulator.4 | |
| [ 3.376054] remoteproc remoteproc0: remote processor wkup_m3 is now up | |
| [ 3.383179] cpu cpu0: Linked as a consumer to regulator.4 | |
| [ 3.391459] PM: bootloader does not support rtc-only! | |
| [ 3.398127] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) | |
| [ 3.411889] ALSA device list: | |
| [ 3.414896] No soundcards found. | |
| [ 3.424895] Freeing unused kernel memory: 1024K | |
| [ 3.430424] Run /init as init process | |
| Loading, please wait... | |
| Starting version 241 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment