Skip to content

Instantly share code, notes, and snippets.

@RobertCNelson
Created January 14, 2022 23:01
Show Gist options
  • Select an option

  • Save RobertCNelson/ef0118e6fa907f918750062e3736b7e3 to your computer and use it in GitHub Desktop.

Select an option

Save RobertCNelson/ef0118e6fa907f918750062e3736b7e3 to your computer and use it in GitHub Desktop.
U-Boot SPL 2021.01-g3419da0b (Jan 11 2022 - 23:17:53 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
Trying to boot from MMC1
init_env from device 17 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.5(release):e0d9fdb
NOTICE: BL31: Built : 20:08:51, Jan 7 2022
U-Boot SPL 2021.01-g3419da0b (Jan 11 2022 - 23:17:53 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Trying to boot from MMC1
U-Boot 2021.01-g3419da0b (Jan 11 2022 - 23:17:53 +0000)
SoC: J721E SR2.0
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM: 4 GiB
Flash: 0 Bytes
MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Error: Can't set serial# to SSSS
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
eth0: ethernet@46000000
Hit any key to stop autoboot: 2  1  0
board_name=[BBONEAI-64-B0-] ...
name_fdt=[k3-j721e-beagleboneai64.dtb] ...
MMC: no card present
mmc_init: -123, time 2002
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
209 bytes read in 6 ms (33.2 KiB/s)
1: Linux eMMC
Retrieving file: /initrd.img
14944948 bytes read in 87 ms (163.8 MiB/s)
Retrieving file: /Image
32715264 bytes read in 183 ms (170.5 MiB/s)
append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /k3-j721e-beagleboneai64.dtb
176172 bytes read in 7 ms (24 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f1bf000, end 8ffffab4 ... OK
Loading Device Tree to 000000008f190000, end 000000008f1be02b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 5.10.90-ti-arm64-r27 (voodoo@rpi4b8g-20) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Wed Jan 12 16:48:27 UTC 2022
[ 0.000000] Machine model: BeagleBoard.org BeagleBone AI-64
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.717736] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.724014] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 0.912681] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.919059] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 2.192307] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 3.743450] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present!
[ 3.750779] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present!
[ 3.759385] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present!
[ 3.766705] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present!
[ 3.774019] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[ 3.781376] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present!
[ 7.859586] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode
[ 7.884230] k3-dsp-rproc 4d80800000.dsp: booting DSP core using boot addr = 0xa6200000
[ 7.956807] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode
[ 7.988825] ov5640 4-003c: ov5640_read_reg: error: reg=300a
[ 8.004947] ov5640 4-003c: ov5640_check_chip_id: failed to read chip identifier
[ 8.079551] k3-dsp-rproc 4d81800000.dsp: booting DSP core using boot addr = 0xa7200000
[ 8.150353] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode
[ 8.157330] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc
[ 8.246596] ov5640 8-003c: ov5640_read_reg: error: reg=300a
[ 8.259271] ov5640 8-003c: ov5640_check_chip_id: failed to read chip identifier
[ 8.338465] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xa8e00000
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ 8.737333] platform 41000000.r5f: configured R5F for IPC-only mode
[ 8.797731] platform 41000000.r5f: R5F core initialized in IPC-only mode
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ 8.963214] platform 5c00000.r5f: configured R5F for remoteproc mode
[ 9.091208] platform 5d00000.r5f: configured R5F for remoteproc mode
[ 9.136883] platform 5e00000.r5f: configured R5F for remoteproc mode
[ 9.176301] platform 5f00000.r5f: configured R5F for remoteproc mode
[ OK ] Finished Load AppArmor profiles.
[ OK ] Reached target System Initialization.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
Starting Raise network interfaces...
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Regenerate SSH host keys...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Started System Logging Service.
[ OK ] Started LSB: Start daemon at boot time.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting containerd container runtime...
Starting Docker Application Container Engine...
Starting A high performanc… and a reverse proxy server...
Starting Permit User Sessions...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
Starting Authorization Manager...
[ OK ] Finished Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Started User Login Management.
[ OK ] Started Authorization Manager.
Debian GNU/Linux 11 BeagleBone ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2022-01-12
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeagleBone login: root
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
[?2004hroot@BeagleBone:~# lsblk
[?2004l
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 14.6G 0 disk
├─mmcblk0p1 179:1 0 128M 0 part /boot/firmware
└─mmcblk0p2 179:2 0 14.5G 0 part /
mmcblk0boot0 179:32 0 4M 1 disk
mmcblk0boot1 179:64 0 4M 1 disk
[?2004hroot@BeagleBone:~#
U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
Trying to boot from MMC1
init_env from device 17 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.5(release):e0d9fdb
NOTICE: BL31: Built : 20:08:51, Jan 7 2022
U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Trying to boot from MMC1
U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
SoC: J721E SR2.0
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM: 4 GiB
Flash: 0 Bytes
MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Error: Can't set serial# to SSSS
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
eth0: ethernet@46000000
Hit any key to stop autoboot: 2  0
=>  run eeprom_dump
Setting bus to 0
0000: aa 55 33 ee 01 37 00 10 2e 00 42 42 4f 4e 45 41 .U3..7....BBONEA
0010: 49 2d 36 34 2d 42 30 2d 00 00 42 30 30 30 37 38 I-64-B0-..B00078
0020: 30 31 42 30 30 30 30 31 36 34 57 57 32 32 42 42 01B0000164WW22BB
0030: 42 42 42 42 53 53 53 53 11 02 00 60 7d fe ff ff BBBBSSSS...`}...
=> reset
resetting ...
U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
Trying to boot from MMC1
init_env from device 17 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.5(release):e0d9fdb
NOTICE: BL31: Built : 20:08:51, Jan 7 2022
U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Trying to boot from MMC1
U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000)
SoC: J721E SR2.0
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM: 4 GiB
Flash: 0 Bytes
MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Error: Can't set serial# to SSSS
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
eth0: ethernet@46000000
Hit any key to stop autoboot: 2  1  0
board_name=[BBONEAI-64-B0-] ...
name_fdt=[k3-j721e-beagleboneai64.dtb] ...
i2c_write: error waiting for data ACK (status=0x116)
pca953x gpio@22: Error reading output register
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
241 bytes read in 9 ms (25.4 KiB/s)
1: Linux microSD
Retrieving file: /initrd.img
14944948 bytes read in 643 ms (22.2 MiB/s)
Retrieving file: /Image
32715264 bytes read in 1395 ms (22.4 MiB/s)
append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher
Retrieving file: /k3-j721e-beagleboneai64.dtb
176172 bytes read in 17 ms (9.9 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f1bf000, end 8ffffab4 ... OK
Loading Device Tree to 000000008f190000, end 000000008f1be02b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 5.10.90-ti-arm64-r27 (voodoo@rpi4b8g-20) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Wed Jan 12 16:48:27 UTC 2022
[ 0.000000] Machine model: BeagleBoard.org BeagleBone AI-64
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-queues@ac000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac200000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-buffers@ac200000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
[ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
[ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
[ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000abffffff]
[ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000adffffff]
[ 0.000000] node 0: [mem 0x00000000ae000000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 512 MiB at 0x00000000e0000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 10 pages/cpu s580504 r8192 d66664 u655360
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65472
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher
[ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
[ 0.000000] Memory: 3309824K/4194304K available (16384K kernel code, 2380K rwdata, 8640K rodata, 4096K init, 901K bss, 360192K reserved, 524288K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x28/0x500 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @880800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000008801e0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008801f0000
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008446] Console: colour dummy device 80x25
[ 0.013013] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023685] pid_max: default: 32768 minimum: 301
[ 0.028555] LSM: Security Framework initializing
[ 0.033380] Yama: becoming mindful.
[ 0.036992] AppArmor: AppArmor initialized
[ 0.041181] TOMOYO Linux initialized
[ 0.044881] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[ 0.052448] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[ 0.061841] rcu: Hierarchical SRCU implementation.
[ 0.067275] Platform MSI: msi-controller@1820000 domain created
[ 0.073703] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.083052] EFI services will not be available.
[ 0.087930] smp: Bringing up secondary CPUs ...
[ 0.093229] Detected PIPT I-cache on CPU1
[ 0.093250] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.093261] GICv3: CPU1: using allocated LPI pending table @0x0000000880200000
[ 0.093297] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.093366] smp: Brought up 1 node, 2 CPUs
[ 0.122725] SMP: Total of 2 processors activated.
[ 0.127531] CPU features: detected: 32-bit EL0 Support
[ 0.132790] CPU features: detected: CRC32 instructions
[ 0.151337] CPU: All CPU(s) started at EL2
[ 0.155541] alternatives: patching kernel code
[ 0.160743] devtmpfs: initialized
[ 0.173303] KASLR disabled due to lack of seed
[ 0.178002] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.187977] futex hash table entries: 512 (order: -1, 32768 bytes, linear)
[ 0.195675] pinctrl core: initialized pinctrl subsystem
[ 0.201300] DMI not present or invalid.
[ 0.205576] NET: Registered protocol family 16
[ 0.213975] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.221282] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.229287] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.237415] audit: initializing netlink subsys (disabled)
[ 0.243158] audit: type=2000 audit(0.156:1): state=initialized audit_enabled=0 res=1
[ 0.243539] thermal_sys: Registered thermal governor 'fair_share'
[ 0.251085] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.257311] thermal_sys: Registered thermal governor 'step_wise'
[ 0.263447] thermal_sys: Registered thermal governor 'user_space'
[ 0.269582] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.276462] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.290112] ASID allocator initialised with 65536 entries
[ 0.322132] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages
[ 0.328992] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
[ 0.335750] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.349705] cryptd: max_cpu_qlen set to 1000
[ 0.360237] raid6: skip pq benchmark and using algorithm neonx8
[ 0.366481] raid6: using neon recovery algorithm
[ 0.372714] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bb6402f] Detected
[ 0.382769] vsys_3v3: supplied by evm_12v0
[ 0.387941] vsys_5v0: supplied by evm_12v0
[ 0.394279] iommu: Default domain type: Translated
[ 0.400465] SCSI subsystem initialized
[ 0.404681] usbcore: registered new interface driver usbfs
[ 0.410829] usbcore: registered new interface driver hub
[ 0.416326] usbcore: registered new device driver usb
[ 0.422107] mc: Linux media interface: v0.10
[ 0.426484] videodev: Linux video capture interface: v2.00
[ 0.432129] pps_core: LinuxPPS API ver. 1 registered
[ 0.437199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.446537] PTP clock support registered
[ 0.450557] EDAC MC: Ver: 3.0.0
[ 0.454858] NetLabel: Initializing
[ 0.458330] NetLabel: domain hash size = 128
[ 0.462789] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.468602] NetLabel: unlabeled traffic allowed by default
[ 0.474599] clocksource: Switched to clocksource arch_sys_counter
[ 0.797642] VFS: Disk quotas dquot_6.6.0
[ 0.801766] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[ 0.809504] AppArmor: AppArmor Filesystem Enabled
[ 0.817971] NET: Registered protocol family 2
[ 0.822582] IP idents hash table entries: 65536 (order: 3, 524288 bytes, linear)
[ 0.831461] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear)
[ 0.840273] TCP established hash table entries: 32768 (order: 2, 262144 bytes, linear)
[ 0.848551] TCP bind hash table entries: 32768 (order: 3, 524288 bytes, linear)
[ 0.856452] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.863366] MPTCP token hash table entries: 4096 (order: 0, 98304 bytes, linear)
[ 0.871034] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
[ 0.877933] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear)
[ 0.885350] NET: Registered protocol family 1
[ 0.890163] RPC: Registered named UNIX socket transport module.
[ 0.896232] RPC: Registered udp transport module.
[ 0.901037] RPC: Registered tcp transport module.
[ 0.905841] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.912424] NET: Registered protocol family 44
[ 0.916969] PCI: CLS 0 bytes, default 64
[ 0.921068] Trying to unpack rootfs image as initramfs...
[ 1.187796] Freeing initrd memory: 14528K
[ 1.192250] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.203184] Initialise system trusted keyrings
[ 1.207832] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[ 1.216692] zbud: loaded
[ 1.220549] NFS: Registering the id_resolver key type
[ 1.225762] Key type id_resolver registered
[ 1.230036] Key type id_legacy registered
[ 1.234169] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.241018] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.248589] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.256118] fuse: init (API version 7.32)
[ 1.260397] F2FS not supported on PAGE_SIZE(65536) != 4096
[ 1.285820] xor: measuring software checksum speed
[ 1.291962] 8regs : 7958 MB/sec
[ 1.297497] 32regs : 9062 MB/sec
[ 1.303284] arm64_neon : 7368 MB/sec
[ 1.307732] xor: using function: 32regs (9062 MB/sec)
[ 1.312895] Key type asymmetric registered
[ 1.317077] Asymmetric key parser 'x509' registered
[ 1.322081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.329717] io scheduler mq-deadline registered
[ 1.336375] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[ 1.342624] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[ 1.352253] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 1.358551] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 1.366874] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.376242] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[ 1.385243] arm-smmu-v3 36600000.iommu: allocated 524288 entries for cmdq
[ 1.394083] arm-smmu-v3 36600000.iommu: allocated 524288 entries for evtq
[ 1.401808] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs
[ 1.416027] brd: module loaded
[ 1.546640] loop: module loaded
[ 1.550321] megasas: 07.714.04.00-rc1
[ 1.555975] libphy: Fixed MDIO Bus: probed
[ 1.560757] tun: Universal TUN/TAP device driver, 1.6
[ 1.566220] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.572628] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.578727] sky2: driver version 1.30
[ 1.583126] VFIO - User Level meta-driver version: 0.3
[ 1.588796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.595484] ehci-pci: EHCI PCI platform driver
[ 1.600710] i2c /dev entries driver
[ 1.604448] Driver for 1-wire Dallas network protocol.
[ 1.609723] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 1.616882] sdhci: Secure Digital Host Controller Interface driver
[ 1.623200] sdhci: Copyright(c) Pierre Ossman
[ 1.627972] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.636261] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.642638] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.649246] hid: raw HID events driver (C) Jiri Kosina
[ 1.654683] usbcore: registered new interface driver usbhid
[ 1.660382] usbhid: USB HID core driver
[ 1.665118] optee: probing for conduit method.
[ 1.669679] optee: revision 3.12 (3d47a131)
[ 1.669940] optee: initialized driver
[ 1.679265] drop_monitor: Initializing network drop monitor service
[ 1.686003] NET: Registered protocol family 10
[ 1.704540] Segment Routing with IPv6
[ 1.708349] mip6: Mobile IPv6
[ 1.711434] NET: Registered protocol family 17
[ 1.716086] Key type dns_resolver registered
[ 1.720645] registered taskstats version 1
[ 1.724834] Loading compiled-in X.509 certificates
[ 1.729875] zswap: loaded using pool lzo/zbud
[ 1.734480] Key type ._fscrypt registered
[ 1.738584] Key type .fscrypt registered
[ 1.742593] Key type fscrypt-provisioning registered
[ 1.749394] Btrfs loaded, crc32c=crc32c-generic
[ 1.754075] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.766401] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 1.772770] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 1.782125] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
[ 1.812402] random: fast init done
[ 1.837377] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
[ 1.843531] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
[ 1.849998] at24 2-0050: supply vcc not found, using dummy regulator
[ 1.878745] at24 2-0050: 512 byte 24c04 EEPROM, writable, 1 bytes/write
[ 1.885538] omap_i2c 42120000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.891794] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.898587] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.904734] omap_i2c 2020000.i2c: bus 5 rev0.12 at 100 kHz
[ 1.910925] omap_i2c 2030000.i2c: bus 6 rev0.12 at 400 kHz
[ 1.916993] omap_i2c 2040000.i2c: bus 7 rev0.12 at 100 kHz
[ 1.923477] omap_i2c 2050000.i2c: bus 8 rev0.12 at 400 kHz
[ 1.929602] omap_i2c 2060000.i2c: bus 9 rev0.12 at 100 kHz
[ 1.936210] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interrupt Router 137 domain created
[ 1.946190] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 131 domain created
[ 1.955004] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrupt Router 213 domain created
[ 1.964846] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[ 1.986893] cdns-torrent-phy 5050000.serdes: 4 lanes, max bit rate 5.400 Gbps
[ 1.996013] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[ 2.003702] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000
[ 2.011985] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000
[ 2.020266] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[ 2.029654] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
[ 2.039534] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 2.046295] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 2.055556] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211
[ 2.065712] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 2.072472] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 2.080485] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 15, base_baud = 6000000) is a 8250
[ 2.090004] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 27, base_baud = 3000000) is a 8250
[ 2.098753] printk: console [ttyS2] enabled
[ 2.098753] printk: console [ttyS2] enabled
[ 2.107192] printk: bootconsole [ns16550a0] disabled
[ 2.107192] printk: bootconsole [ns16550a0] disabled
[ 2.117729] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 28, base_baud = 3000000) is a 8250
[ 2.126760] 2820000.serial: ttyS4 at MMIO 0x2820000 (irq = 29, base_baud = 3000000) is a 8250
[ 2.135774] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 30, base_baud = 3000000) is a 8250
[ 2.186607] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 2.194259] libphy: 46000f00.mdio: probed
[ 2.202415] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 2.210731] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 2.224787] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0
[ 2.235865] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.241363] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.249904] xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000010010
[ 2.259308] xhci-hcd xhci-hcd.0.auto: irq 224, io mem 0x06410000
[ 2.265484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 2.273739] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.280948] usb usb1: Product: xHCI Host Controller
[ 2.285816] usb usb1: Manufacturer: Linux 5.10.90-ti-arm64-r27 xhci-hcd
[ 2.292414] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.297518] hub 1-0:1.0: USB hub found
[ 2.301279] hub 1-0:1.0: 1 port detected
[ 2.305331] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.310815] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.318460] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.325012] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.333162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 2.341409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.348615] usb usb2: Product: xHCI Host Controller
[ 2.353480] usb usb2: Manufacturer: Linux 5.10.90-ti-arm64-r27 xhci-hcd
[ 2.360078] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.365178] hub 2-0:1.0: USB hub found
[ 2.368934] hub 2-0:1.0: 1 port detected
[ 2.475200] mmc0: CQHCI version 5.10
[ 2.481307] vdd_mmc1: supplied by vsys_3v3
[ 2.486335] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100
[ 2.493268] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100
[ 2.500140] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100
[ 2.506987] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100
[ 2.513805] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100
[ 2.518614] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 2.523697] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[ 2.535356] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000
[ 2.543501] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000
[ 2.551594] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[ 2.562610] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.621236] mmc0: Command Queue Engine enabled
[ 2.625676] mmc0: new HS200 MMC card at address 0001
[ 2.630940] mmcblk0: mmc0:0001 TB2916 14.6 GiB
[ 2.635610] mmcblk0boot0: mmc0:0001 TB2916 partition 1 4.00 MiB
[ 2.641625] mmcblk0boot1: mmc0:0001 TB2916 partition 2 4.00 MiB
[ 2.647633] mmcblk0rpmb: mmc0:0001 TB2916 partition 3 4.00 MiB, chardev (236:0)
[ 2.656500] mmcblk0: p1 p2
[ 2.714891] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[ 2.723059] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.730180] usb 1-1: SerialNumber: 59000061AD7D
[ 2.735131] hub 1-1:1.0: USB hub found
[ 2.738902] hub 1-1:1.0: 4 ports detected
[ 3.030607] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 3.137335] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 3.145672] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.152966] usb 1-1.1: Product: USB Receiver
[ 3.157232] usb 1-1.1: Manufacturer: Logitech
[ 3.169874] input: Logitech USB Receiver as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input0
[ 3.242880] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
[ 3.257899] input: Logitech USB Receiver Mouse as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input1
[ 3.274155] input: Logitech USB Receiver Consumer Control as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2
[ 3.350687] input: Logitech USB Receiver System Control as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3
[ 3.367749] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
[ 3.382490] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input2
[ 3.550698] j721e-pcie 2910000.pcie: PCI host bridge to bus 0000:00
[ 3.556961] pci_bus 0000:00: root bus resource [bus 00-0f]
[ 3.562435] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x18001000-0x18010fff])
[ 3.571895] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff]
[ 3.578782] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400
[ 3.584777] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.594411] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.604069] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xe8 may corrupt adjacent RW1C bits
[ 3.613791] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 3.623522] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92 may corrupt adjacent RW1C bits
[ 3.633245] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xb2 may corrupt adjacent RW1C bits
[ 3.642997] pci 0000:00:00.0: supports D1
[ 3.646995] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.652729] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x84 may corrupt adjacent RW1C bits
[ 3.665472] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.673472] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 3.683194] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 3.692916] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 3.705288] pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01
[ 3.711904] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.717182] pcieport 0000:00:00.0: PME: Signaling with IRQ 498
[ 3.723188] pcieport 0000:00:00.0: AER: enabled with IRQ 498
[ 3.729748] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 3.740190] ti-udma 31150000.dma-controller: Channels: 84 (tchan: 42, rchan: 42, gp-rflow: 16)
[ 3.754219] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 3.761116] spi-nor: probe of spi1.0 failed with error -2
[ 3.806605] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 3.814254] libphy: 46000f00.mdio: probed
[ 3.822396] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 3.830714] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 3.844246] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 3.851207] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 3.858422] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 3.864773] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0
[ 5.372722] mmc1: CQHCI version 5.10
[ 5.377241] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present!
[ 5.384505] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present!
[ 5.393184] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present!
[ 5.400542] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present!
[ 5.407861] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[ 5.415178] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present!
[ 5.423668] input: gpio-keys as /devices/platform/gpio-keys/input/input5
[ 6.437507] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 6.446281] Freeing unused kernel memory: 4096K
[ 6.460773] Checked W+X mappings: passed, no W+X pages found
[ 6.466451] Run /init as init process
Loading, please wait...
[ 6.499483] mmc1: new ultra high speed DDR50 SDHC card at address e624
[ 6.506676] mmcblk1: mmc1:e624 SE16G 14.8 GiB
[ 6.513766] mmcblk1: p1 p2
Starting version 247.3-6
[ 7.023820] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[ 7.096074] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input2
[ 7.121285] Console: switching to colour frame buffer device 240x75
[ 7.161944] tidss 4a00000.dss: [drm] fb0: tidssdrmfb frame buffer device
[ 7.208074] remoteproc remoteproc0: b034000.pru is available
[ 7.215782] remoteproc remoteproc1: b004000.rtu is available
[ 7.239022] input: Logitech M510 as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4051.0004/input/input6
[ 7.260070] remoteproc remoteproc2: b00a000.txpru is available
[ 7.264629] logitech-hidpp-device 0003:046D:4051.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-xhci-hcd.0.auto-1.1/input2:1
[ 7.267779] remoteproc remoteproc3: b038000.pru is available
[ 7.285177] remoteproc remoteproc4: b006000.rtu is available
[ 7.287310] input: Logitech K360 as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4004.0005/input/input7
[ 7.291319] remoteproc remoteproc5: b00c000.txpru is available
[ 7.315367] logitech-hidpp-device 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-xhci-hcd.0.auto-1.1/input2:2
[ 7.322756] remoteproc remoteproc6: b134000.pru is available
[ 7.335111] remoteproc remoteproc7: b104000.rtu is available
[ 7.341562] remoteproc remoteproc8: b10a000.txpru is available
[ 7.347791] remoteproc remoteproc9: b138000.pru is available
[ 7.353920] remoteproc remoteproc10: b106000.rtu is available
[ 7.360149] remoteproc remoteproc11: b10c000.txpru is available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Warning: fsck not present, so skipping root file system
[ 7.657725] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
--------------------------------------------------------------------------------
Version: [1.20220112.0: add cleanup grow_partition.service and beagle-flasher-init-shutdown.service...]
--------------------------------------------------------------------------------
cat /etc/default/beagle-flasher:
--------------------------------------------------------------------------------
source=/dev/mmcblk1
destination=/dev/mmcblk0
rfs_partition=dual
rfs_boot_startmb=1
rfs_boot_size_mb=128
bootloader=/opt/u-boot/bb-u-boot-beagleboneai64/install-emmc.sh
flash_back=bbai64-emmc-to-microsd
extlinux=/opt/u-boot/bb-u-boot-beagleboneai64/emmc-extlinux.conf
--------------------------------------------------------------------------------
INFO: Giving system time to stablize...
--------------------------------------------------------------------------------
5
4
3
2
1
--------------------------------------------------------------------------------
INFO: Preparing /tmp
INFO: [mount -t tmpfs tmpfs /tmp]
--------------------------------------------------------------------------------
INFO: [lsblk -i]
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 14.6G 0 disk
|-mmcblk0p1 179:1 0 128M 0 part
`-mmcblk0p2 179:2 0 14.5G 0 part
mmcblk0boot0 179:32 0 4M 1 disk
mmcblk0boot1 179:64 0 4M 1 disk
mmcblk1 179:96 0 14.8G 0 disk
|-mmcblk1p1 179:97 0 128M 0 part
`-mmcblk1p2 179:98 0 6.9G 0 part /
--------------------------------------------------------------------------------
INFO: copying [/dev/mmcblk1] -> [/dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: [source=/dev/mmcblk1] is a valid block device
INFO: [destination=/dev/mmcblk0] is a valid block device
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Erasing: [/dev/mmcblk0]
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: [dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=148 status=progress]
148+0 records in
148+0 records out
155189248 bytes (155 MB, 148 MiB) copied, 6.50154 s, 23.9 MB/s
--------------------------------------------------------------------------------
INFO: [dd if=/dev/mmcblk0 of=/dev/null bs=1M count=148 status=progress]
148+0 records in
148+0 records out
155189248 bytes (155 MB, 148 MiB) copied, 0.841219 s, 184 MB/s
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Erasing: [/dev/mmcblk0] complete
--------------------------------------------------------------------------------
INFO: [/bin/bash /opt/u-boot/bb-u-boot-beagleboneai64/install-emmc.sh]
Changing ext_csd[BOOT_BUS_CONDITIONS] from 0x02 to 0x02
H/W Reset is already permanently enabled on /dev/mmcblk0
2+1 records in
2+1 records out
280648 bytes (281 kB, 274 KiB) copied, 0.0742899 s, 3.8 MB/s
5+1 records in
5+1 records out
773488 bytes (773 kB, 755 KiB) copied, 0.14978 s, 5.2 MB/s
8+1 records in
8+1 records out
1176352 bytes (1.2 MB, 1.1 MiB) copied, 0.225072 s, 5.2 MB/s
2+1 records in
2+1 records out
268990 bytes (269 kB, 263 KiB) copied, 0.0726484 s, 3.7 MB/s
--------------------------------------------------------------------------------
INFO: Partitioning: /dev/mmcblk0
INFO: /sbin/sfdisk: [sfdisk from util-linux 2.36.1]
INFO: /sbin/sfdisk: [/sbin/sfdisk --force /dev/mmcblk0]
INFO: /sbin/sfdisk: [1M,128M,0xc,*]
INFO: /sbin/sfdisk: [129M,,,-]
--------------------------------------------------------------------------------
Checking that no-one is using this disk right now ... OK
Disk /dev/mmcblk0: 14.6 GiB, 15678308352 bytes, 30621696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
>>> Created a new DOS disklabel with disk identifier 0x3380e18f.
/dev/mmcblk0p1: Created a new partition 1 of type 'W95 FAT32 (LBA)' and of size 128 MiB.
/dev/mmcblk0p2: Created a new partition 2 of type 'Linux' and of size 14.5 GiB.
/dev/mmcblk0p3: Done.
New situation:
Disklabel type: dos
Disk identifier: 0x3380e18f
Device Boot  Start  End  Sectors  Size Id Type
/dev/mmcblk0p1 * 2048 264191 262144 128M c W95 FAT32 (LBA)
/dev/mmcblk0p2 264192 30621695 30357504 14.5G 83 Linux
The partition table has been altered.
Calling ioctl() to re-read partition table.
[ 22.261460] mmcblk0: p1 p2
Syncing disks.
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Formatting: /dev/mmcblk0
/sbin/mkfs.vfat -F 16 /dev/mmcblk0p1 -n FIRMWARE
mkfs.fat 4.2 (2021-01-31)
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
/sbin/mkfs.ext4 /dev/mmcblk0p2 -L rootfs
mke2fs 1.46.2 (28-Feb-2021)
Discarding device blocks: 4096/3794688 done
Creating filesystem with 3794688 4k blocks and 950272 inodes
Filesystem UUID: ca5d9c08-ad31-4c86-b6d7-1b373ec3b806
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
Allocating group tables: 0/116 done
Writing inode tables: 0/116 1/116 done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: 0/116 done
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Formatting: /dev/mmcblk0 complete
--------------------------------------------------------------------------------
Copying: /dev/mmcblk1p1 -> /dev/mmcblk0p1
rsync: /boot/firmware/ -> /tmp/boot/
[ 31.045556] random: crng init done
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: [/boot/extlinux/extlinux.conf]
'/opt/u-boot/bb-u-boot-beagleboneai64/emmc-extlinux.conf' -> '/tmp/boot/extlinux/extlinux.conf'
INFO: [cat /tmp/boot/extlinux/extlinux.conf]
label Linux eMMC
kernel /Image
append console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
fdtdir /
initrd /initrd.img
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Copying: /dev/mmcblk1p2 -> /dev/mmcblk0p2
INFO: [mount /dev/mmcblk0p2 /tmp/rootfs/ -o async,noatime]
[ 56.234140] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
INFO: /usr/bin/rsync: [/ -> /tmp/rootfs/]
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Copying: Kernel modules
INFO: /usr/bin/rsync: /lib/modules/5.10.90-ti-arm64-r27/ -> /tmp/rootfs/lib/modules/5.10.90-ti-arm64-r27/
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Generating: /etc/fstab
INFO: [cat /tmp/rootfs/etc/fstab]
# /etc/fstab: static file system information.
#
/dev/mmcblk0p2 / ext4 noatime,errors=remount-ro 0 1
/dev/mmcblk0p1 /boot/firmware vfat defaults 0 0
debugfs /sys/kernel/debug debugfs mode=755,uid=root,gid=gpio,defaults 0 0
--------------------------------------------------------------------------------
INFO: [cp -v /etc/beagle-flasher/bbai64-emmc-to-microsd /tmp/rootfs/etc/default/beagle-flasher]
'/etc/beagle-flasher/bbai64-emmc-to-microsd' -> '/tmp/rootfs/etc/default/beagle-flasher'
--------------------------------------------------------------------------------
INFO: [cat /tmp/rootfs/etc/default/generic-sys-mods]
#This file is sourced by /usb/bin/bb-growpart
ROOT_DRIVE=/dev/mmcblk0
ROOT_PARTITION=2
--------------------------------------------------------------------------------
Copying: /dev/mmcblk1p2 -> /dev/mmcblk0p2 complete
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: [umount /tmp/rootfs/ || umount -l /tmp/rootfs/ || write_failure]
--------------------------------------------------------------------------------
INFO: [umount /tmp || true]
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
--------------------------------------------------------------------------------
INFO: Force writeback of eMMC buffers by Syncing: /dev/mmcblk0
INFO: [dd if=/dev/mmcblk0 of=/dev/null count=100000 status=progress]
100000+0 records in
100000+0 records out
51200000 bytes (51 MB, 49 MiB) copied, 0.285278 s, 179 MB/s
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk0]
-----------------------------[ 326.649817] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
---------------------------------------------------
INFO: [We are init]
[ 326.785069] systemd[1]: System time before build time, advancing clock.
[ 326.819323] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 326.841758] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 326.851658] systemd[1]: Set hostname to <BeagleBone>.
[ 327.101050] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 327.179121] systemd[1]: Queued start job for default target Graphical Interface.
[ 327.186551] systemd[1]: Unnecessary job for /dev/bone/uart/0 was removed.
[ 327.193341] systemd[1]: Unnecessary job for /sys/devices/platform/bus@100000/2800000.serial/tty/ttyS2 was removed.
[ 327.232308] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice[0[ 327.238950] systemd[1]: Created slice system-modprobe.slice.
m.
[ OK ] Created slice system-modprobe.slice[ 327.250323] systemd[1]: Created slice system-serial\x2dgetty.slice.
.
[ OK ] Created slice system-serial\x2dgett[ 327.262375] systemd[1]: Created slice User and Session Slice.
y.slice.
[ 327.273717] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Created slice User and Session Slic[ 327.282989] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
e.
[ OK ] Started Forward Password R[ 327.297497] systemd[1]: Reached target Remote File Systems.
…uests to Wall Directory Watch.
[ OK ] Set [ 327.308429] systemd[1]: Reached target Slices.
up automount Arbitrary…s File System Automount Point[ 327.318413] systemd[1]: Reached target Swap.
[0m.
[ OK ] Reached target Remote File S[ 327.328542] systemd[1]: Listening on Syslog Socket.
ystems.
[ OK ] Reached target Slices[ 327.338857] systemd[1]: Listening on fsck to fsckd communication Socket.
.
[ OK ] Reached target Swap.
[ 327.350987] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Syslog Socket.
[[ 327.363260] systemd[1]: Listening on Journal Audit Socket.
 OK ] Listening on fsck to fsckd communica[ 327.374146] systemd[1]: Listening on Journal Socket (/dev/log).
tion Socket.
[ OK ] Listening on ini[ 327.385647] systemd[1]: Listening on Journal Socket.
tctl Compatibility Named Pipe.
[ OK ] Listeni[ 327.396225] systemd[1]: Listening on Network Service Netlink Socket.
ng on Journal Audit Socket.
[ OK ] L[ 327.408082] systemd[1]: Listening on udev Control Socket.
istening on Journal Socket (/dev/log).
[ [ 327.418895] systemd[1]: Listening on udev Kernel Socket.
OK ] Listening on Journal Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ OK ] Listening on udev Control Soc[ 327.445612] systemd[1]: Mounting Huge Pages File System...
ket.
[ OK ] Listening on udev Kernel[ 327.454931] systemd[1]: Mounting POSIX Message Queue File System...
Socket.
Mounting Huge Pages File System...
[ 327.467536] systemd[1]: Mounting /sys/kernel/debug...
Mounting POSIX Message Queue File System...
[ 327.479527] systemd[1]: Mounting Kernel Trace File System...
Mounting /sys/kernel/debug...
[ 327.490359] systemd[1]: Starting Set the console keyboard layout...
Mounting Kernel Trace File System...
[ 327.501158] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Set the console keyboard layout...
Starting Create list of st…odes for the [ 327.517311] systemd[1]: Starting Load Kernel Module configfs...
current kernel...
Starting Load Kernel Module configfs...
[ 327.533412] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 327.544733] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 327.552956] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 327.570123] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 327.582523] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 327.591425] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 327.609965] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 327.620429] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.[ 327.627407] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File Sy[ 327.644307] systemd[1]: Mounted /sys/kernel/debug.
stem.
[ 327.655021] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted /sys/kernel/debug.
[ 327.663715] systemd[1]: Finished Set the console keyboard layout.
[ OK ] Mounted Kernel Trace File System[0[ 327.676019] systemd[1]: Finished Create list of static device nodes for the current kernel.
m.
[ OK ] Finished Set the console keybo[ 327.689911] NET: Registered protocol family 36
ard layout.
[ OK ] Finished Create l[ 327.698435] usbcore: registered new interface driver wpanusb
ist of st… nodes for the current kernel.
[ 327.711405] systemd[1]: [email protected]: Succeeded.
[ 327.719615] systemd[1]: Finished Load Kernel Module configfs.
[ 327.721568] gb_bootrom: module is from the staging directory, the quality is unknown, you have been warned.
[ 327.736156] systemd[1]: [email protected]: Succeeded.
[ OK ] Finished Load Kernel Module configf[ 327.744105] systemd[1]: Finished Load Kernel Module drm.
s.
[ 327.754356] greybus: registered new driver bootrom
[ OK ] Finished Load Kernel Module drm[ 327.763838] systemd[1]: [email protected]: Succeeded.
.
[ 327.775241] gb_spilib: module is from the staging directory, the quality is unknown, you have been warned.
[ 327.775417] systemd[1]: Finished Load Kernel Module fuse.
[ 327.792884] gb_firmware: module is from the staging directory, the quality is unknown, you have been warned.
[ 327.803989] systemd[1]: Finished File System Check on Root Device.
[ OK ] Finished Load Kernel Module fuse[0[ 327.815585] greybus: registered new driver gb-firmware
m.
[ OK ] Finished File System Check on Root Device.
[ 327.835924] gb_gbphy: module is from the staging directory, the quality is unknown, you have been warned.
[ 327.841728] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...[ 327.859410] greybus: registered new driver gbphy
[ 327.869783] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System.[ 327.879567] systemd[1]: Started File System Check Daemon to report status.
..
[ 327.890301] gb_gpio: module is from the staging directory, the quality is unknown, you have been warned.
[ OK ] Started File System Check Daemon to[ 327.905135] gb_gbphy: registered new driver gpio
report status.
[ 327.912904] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems[ 327.925105] systemd[1]: Mounted FUSE Control File System.
[0m...
[ OK ] Mounted FUSE Control File System[0[ 327.934390] gb_hid: module is from the staging directory, the quality is unknown, you have been warned.
m.
[ 327.948010] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File S[ 327.959522] systemd[1]: Started Journal Service.
ystem.
[ OK ] Started Journal Service.
[ 327.972291] greybus: registered new driver hid
[ 327.992637] gb_i2c: module is from the staging directory, the quality is unknown, you have been warned.
[ 328.015438] gb_gbphy: registered new driver i2c
[ 328.027671] gb_log: module is from the staging directory, the quality is unknown, you have been warned.
[ 328.044464] greybus: registered new driver log
[ 328.051967] gb_loopback: module is from the staging directory, the quality is unknown, you have been warned.
[ 328.054823] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[ 328.068510] greybus: registered new driver loopback
[ OK ] Finished Remount Root and Kernel Fi[ 328.080825] gb_raw: module is from the staging directory, the quality is unknown, you have been warned.
le Systems.
Starting Flush Journal to Persistent Storage[[ 328.100775] greybus: registered new driver raw
0m...
Starting Load/Save Random Seed...
Starting Create System Users...
[ 328.123364] gb_spi: module is from the staging directory, the quality is unknown, you have been warned.
[ 328.134363] systemd-journald[3545]: Received client request to flush runtime journal.
[ 328.143351] gb_gbphy: registered new driver spi
[ 328.150120] gb_uart: module is from the staging directory, the quality is unknown, you have been warned.
[ 328.161615] gb_gbphy: registered new driver uart
[ OK ] Finished Load Kernel Modules.
Starting Apply Kernel Variables...
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Show Plymouth Boot Screen...
Starting Network Service...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Started Network Service.
[ 328.614391] TI DP83867 46000f00.mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=46000f00.mdio:00, irq=POLL)
[ 328.632245] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down
[ OK ] Found device /dev/ttyS2.
[ OK ] Reached target Hardware activated USB gadget.
[ 329.007053] ov5640 4-003c: supply DOVDD not found, using dummy regulator
[ 329.028705] pvrsrvkm: loading out-of-tree module taints kernel.
[ 329.030883] extcon-tusb322: probe of 4-0047 failed with error -121
[ 329.041195] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-dma-memory@a7000000
[ 329.101026] ov5640 4-003c: supply AVDD not found, using dummy regulator
[ 329.121219] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc
[ 329.132453] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode
[ 329.140037] ov5640 4-003c: supply DVDD not found, using dummy regulator
[ 329.141765] k3-dsp-rproc 4d80800000.dsp: local reset is deasserted for device
[ 329.157366] img_enc 4200000.video-encoder: encoder registered as /dev/video0
[ 329.194707] ov5640 4-003c: ov5640_read_reg: error: reg=300a
[ 329.210747] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c
[ 329.231163] ov5640 4-003c: ov5640_check_chip_id: failed to read chip identifier
[ 329.270797] PVR_K: 3577: Read BVNC 22.104.208.318 from HW device registers
[ OK ] Found device /dev/mmcblk1p1.
Mounting /boot/firmware...
[ OK ] Mounted /boot/firmware.
[ OK ] Reached target Local File Systems.
Starting Load AppArmor profiles...
Starting Set console font and keymap...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Set console font and keymap.
[ 329.403630] ov5640: probe of 4-003c failed with error -121
[ 329.434355] remoteproc remoteproc12: 4d80800000.dsp is available
[ 329.442297] PVR_K: 3577: RGX Device registered with BVNC 22.104.208.318
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ 329.552587] img_dec 4300000.video-decoder: decoder registered as /dev/video1
[ 329.595134] ov5640 8-003c: supply DOVDD not found, using dummy regulator
[ 329.602171] remoteproc remoteproc12: powering up 4d80800000.dsp
[ 329.608111] remoteproc remoteproc12: Booting fw image j7-c66_0-fw, size 187480
[ 329.659724] k3-dsp-rproc 4d80800000.dsp: booting DSP core using boot addr = 0xa6200000
[ 329.666575] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-dma-memory@a6000000
[ 329.676405] remoteproc12#vdev0buffer: assigned reserved memory node c66-dma-memory@a7000000
[ 329.684966] remoteproc12#vdev0buffer: registered virtio0 (type 7)
[ 329.695214] remoteproc remoteproc12: remote processor 4d80800000.dsp is now up
[ 329.707065] ov5640 8-003c: supply AVDD not found, using dummy regulator
[ 329.730672] [drm] Initialized pvr 1.13.5776728 20170530 for 4e20000000.gpu on minor 1
[ 329.750668] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time[ 329.792704] ov5640 8-003c: supply DVDD not found, using dummy regulator
Set.
[ OK ] Reached target System Time Synchronized.
[ 329.855656] k3-dsp-rproc 4d81800000.dsp: local reset is deasserted for device
[ 329.925812] audit: type=1400 audit(1642030529.140:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=3673 comm="apparmor_parser"
[ 329.946707] audit: type=1400 audit(1642030529.140:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=3673 comm="apparmor_parser"
[ 329.958319] remoteproc remoteproc13: 4d81800000.dsp is available
[ 329.967468] audit: type=1400 audit(1642030529.140:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=3673 comm="apparmor_parser"
[ 330.068413] ov5640 8-003c: ov5640_read_reg: error: reg=300a
[ 330.071636] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma-memory@a8000000
[ 330.078922] ov5640 8-003c: ov5640_check_chip_id: failed to read chip identifier
[ 330.082626] remoteproc remoteproc13: powering up 4d81800000.dsp
[ 330.095676] remoteproc remoteproc13: Booting fw image j7-c66_1-fw, size 187480
[ 330.103353] k3-dsp-rproc 4d81800000.dsp: booting DSP core using boot addr = 0xa7200000
[ 330.116578] ov5640: probe of 8-003c failed with error -121
[ 330.126016] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode
[ 330.126240] remoteproc13#vdev0buffer: assigned reserved memory node c66-dma-memory@a6000000
[ 330.142548] remoteproc13#vdev0buffer: registered virtio1 (type 7)
[ 330.148793] remoteproc remoteproc13: remote processor 4d81800000.dsp is now up
[ 330.165098] remoteproc remoteproc14: 64800000.dsp is available
[ 330.212741] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[ 330.230253] platform 41000000.r5f: configured R5F for IPC-only mode
[ 330.242897] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000
[ 330.251076] audit: type=1400 audit(1642030529.460:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=3715 comm="apparmor_parser"
[ 330.267139] audit: type=1400 audit(1642030529.460:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=3715 comm="apparmor_parser"
[ 330.291087] remoteproc remoteproc15: 41000000.r5f is available
[ 330.330499] remoteproc remoteproc15: attaching to 41000000.r5f
[ 330.336588] platform 41000000.r5f: R5F core initialized in IPC-only mode
[ 330.345386] remoteproc15#vdev0buffer: assigned reserved memory node r5f-dma-memory@a0000000
[ 330.354057] remoteproc15#vdev0buffer: registered virtio2 (type 7)
[ 330.360301] remoteproc remoteproc15: remote processor 41000000.r5f is now attached
[ 330.371152] platform 5c00000.r5f: configured R5F for remoteproc mode
[ 330.386183] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000
[ 330.403103] remoteproc remoteproc16: 5c00000.r5f is available
[ 330.434466] remoteproc remoteproc16: powering up 5c00000.r5f
[ 330.440193] remoteproc remoteproc16: Booting fw image j7-main-r5f0_0-fw, size 78708
[ 330.516717] remoteproc remoteproc14: powering up 64800000.dsp
[ 330.522475] remoteproc remoteproc14: Booting fw image j7-c71_0-fw, size 10489872
[ 330.530712] remoteproc remoteproc14: unsupported resource 65538
[ 330.537291] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xa8e00000
[ 330.591155] platform 5d00000.r5f: configured R5F for remoteproc mode
[ 330.598252] remoteproc14#vdev0buffer: assigned reserved memory node c71-dma-memory@a8000000
[ 330.606899] remoteproc16#vdev0buffer: assigned reserved memory node r5f-dma-memory@a2000000
[ 330.618753] remoteproc14#vdev0buffer: registered virtio3 (type 7)
[ 330.625114] remoteproc16#vdev0buffer: registered virtio4 (type 7)
[ 330.631439] remoteproc remoteproc14: remote processor 64800000.dsp is now up
[ 330.638565] remoteproc remoteproc16: remote processor 5c00000.r5f is now up
[ 330.655960] audit: type=1400 audit(1642030529.872:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session" pid=3672 comm="apparmor_parser"
[ 330.678405] audit: type=1400 audit(1642030529.896:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=3672 comm="apparmor_parser"
[ 330.698787] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000
[ 330.724560] audit: type=1400 audit(1642030529.940:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=3735 comm="apparmor_parser"
[ OK ] Finished Load AppArmor profiles.
[ OK ] Reached target System Initialization.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[[0;3[ 330.769795] remoteproc remoteproc17: 5d00000.r5f is available
2m OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
Starting Raise network interfaces...
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Grow Root Partition...
Starting Regenerate SSH host keys...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[ 330.908218] remoteproc remoteproc17: powering up 5d00000.r5f
[ 330.914028] remoteproc remoteproc17: Booting fw image j7-main-r5f0_1-fw, size 78708
[ 330.927753] platform 5e00000.r5f: configured R5F for remoteproc mode
[ 330.935214] remoteproc17#vdev0buffer: assigned reserved memory node r5f-dma-memory@a3000000
[ 330.945422] remoteproc17#vdev0buffer: registered virtio5 (type 7)
[ 330.951791] remoteproc remoteproc17: remote processor 5d00000.r5f is now up
[ 330.958212] using random self ethernet address
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ 330.980232] using random host ethernet address
[ 331.029102] using random self ethernet address
[ 331.034689] using random host ethernet address
[ 331.042928] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memory@a4000000
[ 331.052927] remoteproc remoteproc18: 5e00000.r5f is available
[ 331.057426] Mass Storage Function, version: 2009/09/11
[ 331.074279] platform 5f00000.r5f: configured R5F for remoteproc mode
[ 331.078103] remoteproc remoteproc18: powering up 5e00000.r5f
[ 331.086731] LUN: removable file: (no medium)
[ 331.087149] remoteproc remoteproc18: Booting fw image j7-main-r5f1_0-fw, size 78708
[ 331.103696] remoteproc18#vdev0buffer: assigned reserved memory node r5f-dma-memory@a4000000
[ 331.114755] remoteproc18#vdev0buffer: registered virtio6 (type 7)
[ 331.121126] remoteproc remoteproc18: remote processor 5e00000.r5f is now up
[ 331.138098] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memory@a5000000
[ OK ] Started System Logging Service.
[ OK ] Started LSB: Start daemon at boot time.
[ 331.249737] remoteproc remoteproc19: 5f00000.r5f is available
[ 331.260069] remoteproc remoteproc19: powering up 5f00000.r5f
[ 331.260079] remoteproc remoteproc19: Booting fw image j7-main-r5f1_1-fw, size 78708
[ 331.261193] remoteproc19#vdev0buffer: assigned reserved memory node r5f-dma-memory@a5000000
[ 331.261273] remoteproc19#vdev0buffer: registered virtio7 (type 7)
[ 331.261276] remoteproc remoteproc19: remote processor 5f00000.r5f is now up
[ OK ] Finished Raise network interfaces.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting Beagle Flasher Shutdown...
Starting containerd container runtime...
Starting Docker Application Container Engine...
Starting A high performanc… and a reverse proxy server...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Stopped Beagle Flasher Shutdown.
[ OK ] Removed slice system-modprobe.slice.
[ OK ] Stopped target Timers.
[ OK ] Stopped Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Stopped Discard unused blocks once a week.
[ OK ] Stopped Daily rotation of log files.
[ OK ] Stopped Daily Cleanup of Temporary Directories.
[ OK ] Stopped target System Time Synchronized.
[ OK ] Stopped target System Time Set.
Stopping Load/Save Random Seed...
Stopping Avahi mDNS/DNS-SD Stack...
Stopping Regular background program processing daemon...
[ OK ] Removed slice system-getty.slice.
Starting Show Plymouth Power Off Screen...
Stopping System Logging Service...
[ OK ] Removed slice system-serial\x2dgetty.slice.
Stopping User Login Management...
Stopping Permit User Sessions...
Stopping LSB: Start daemon at boot time...
[ OK ] Stopped Avahi mDNS/DNS-SD Stack.
[ OK ] Stopped Regular background program processing daemon.
[ OK ] Stopped System Logging Service.
[ OK ] Stopped BeagleBoard.org USB gadgets.
[ OK ] Stopped Regenerate SSH host keys.
[ OK ] Stopped Docker Application Container Engine.
[ OK ] Stopped A high performance…er and a reverse proxy server.
[ OK ] Stopped containerd container runtime.
[ OK ] Stopped Permit User Sessions.
[ OK ] Stopped User Login Management.
[ OK ] Started Show Plymouth Power Off Screen.
[ OK ] Stopped Load/Save Random Seed.
[ OK ] Stopped target Network is Online.
[ OK ] Stopped target Network.
[ OK ] Stopped target Hardware activated USB gadget.
Stopping Raise network interfaces...
Stopping Network Service...
Stopping WPA supplicant...
[ OK ] Stopped Grow Root Partition.
[ OK ] Stopped WPA supplicant.
Stopping D-Bus System Message Bus...
[ OK ] Stopped LSB: Start daemon at boot time.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped Network Service.
[ OK ] Stopped D-Bus System Message Bus.
[ OK ] Stopped Raise network interfaces.
(K(K[ 332.145695] cdns-csi2rx 4504000.csi-bridge: Probed CSI2RX with 2/4 lanes, 4 streams, external D-PHY
[ 332.215485] cdns-csi2rx 4514000.csi-bridge: Probed CSI2RX with 2/4 lanes, 4 streams, external D-PHY
[ 332.309370] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 332.314816] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.322447] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[ 332.381973] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 332.388189] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 332.394138] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.402929] virtio_rpmsg_bus virtio3: rpmsg host is online
[ 332.408568] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe
[ 332.415840] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.419912] virtio_rpmsg_bus virtio4: rpmsg host is online
[ 332.425982] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe
[ 332.436158] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.443776] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe
[ OK ] Stopped Disk Manager.
[ 332.443862] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.443927] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xe
[ OK ] Stopped target Basic System.
[ OK ] Stopped Forward Password R…s to Plymouth Directory Watch.
[ OK ] Stopped target Paths.
[ OK ] Stopped target Slices.
[ OK ] Removed slice [ 332.513614] virtio_rpmsg_bus virtio5: rpmsg host is online
User and Session Slice.
[ OK ] Stopped target Sockets.
[ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Closed Docker Socket for the API.
[ OK ] Stopped target System Initialization[ 332.523967] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xd
[0m.
[ OK ] Stopped target Local Encrypt[ 332.524931] virtio_rpmsg_bus virtio6: rpmsg host is online
ed Volumes.
[ 332.525601] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xe
[ 332.525652] virtio_rpmsg_bus virtio7: rpmsg host is online
[ 332.541274] virtio_rpmsg_bus virtio7: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.542064] virtio_rpmsg_bus virtio7: creating channel rpmsg_chrdev addr 0xe
[ 332.543432] virtio_rpmsg_bus virtio6: creating channel ti.ipc4.ping-pong addr 0xd
[ 332.544562] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xe
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Stopped target Swap.
[ OK ] Closed Syslog Socket.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
Stopping Network Time Synchronization...
Stopping Update UTMP about System Boot/Shutdown...
[ OK ] Stopped Network Time Synchronization.
[ OK ] Stopped Update UTMP about System Boot/Shutdown.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
Unmounting /boot/firmware...
[ OK ] Unmounted /boot/firmware.
[ OK ] Stopped target Local File Systems (Pre).
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create System Users.
[ OK ] Stopped Remount Root and Kernel File Systems.
[ OK ] Stopped File System Check on Root Device.
[ OK ] Reached tar[ 332.764234] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
get Shutdown.
[ OK ] Reached target [ 332.764278] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Final Step.
[ OK ] Finished Power-Off.
[ OK ] Reached target Power-Off.
[ 332.899486] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 332.956561] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 332.975188] systemd-journald[3545]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 333.034861] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 333.050761] systemd-shutdown[1]: Unmounting file systems.
[ 333.057937] [4059]: Remounting '/' read-only in with options 'errors=remount-ro'.
[ 333.067812] [4059]: Failed to remount '/' read-only: Device or resource busy
[ 333.075364] systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[ 333.082495] systemd-shutdown[1]: Deactivating swaps.
[ 333.087607] systemd-shutdown[1]: All swaps deactivated.
[ 333.092844] systemd-shutdown[1]: Detaching loop devices.
[ 333.100574] systemd-shutdown[1]: All loop devices detached.
[ 333.106352] systemd-shutdown[1]: Stopping MD devices.
[ 333.111742] systemd-shutdown[1]: All MD devices stopped.
[ 333.117125] systemd-shutdown[1]: Detaching DM devices.
[ 333.122489] systemd-shutdown[1]: All DM devices detached.
[ 333.128188] systemd-shutdown[1]: Unmounting file systems.
[ 333.135056] [4061]: Remounting '/' read-only in with options 'errors=remount-ro'.
[ 333.147755] [4061]: Failed to remount '/' read-only: Device or resource busy
[ 333.155198] systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[ 333.161906] systemd-shutdown[1]: Cannot finalize remaining file systems, continuing.
[ 333.171414] systemd-shutdown[1]: Failed to finalize file systems, ignoring.
[ 333.178902] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 333.197968] systemd-shutdown[1]: Powering off.
[ 333.220165] pci_generic_config_write32: 21 callbacks suppressed
[ 333.220172] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xdc may corrupt adjacent RW1C bits
[ 333.235883] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xc8 may corrupt adjacent RW1C bits
[ 333.245675] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92 may corrupt adjacent RW1C bits
[ 333.255396] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x9c may corrupt adjacent RW1C bits
[ 333.265183] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92 may corrupt adjacent RW1C bits
[ 333.274910] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 333.284612] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 333.309132] reboot: Power down
ERROR: System Off: operation not handled.
\00\00\00
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment