Controle o Módulo Relé Serial da RoboCore com o aplicativo Blynk.

Pinos-Virtuais-e-Relay-Serial-no-Blynk

/*************************************************************
  Pinos-Virtuais-e-Relay-Serial-no-Blynk
  // Controle o Módulo Relé Serial da RoboCore com o aplicativo Blynk.
  
  Produtos e tutoriais:     http://robocore.net
  Siga a RoboCore:          http://facebook.com/robocore
                            http://youtube.com/robocore
                            http://instagram.com/robocore
  __________
  
  Baseado no exemplo de ESP8266 da biblioteca Blynk.
  Modificado em 30 Ago 2018 por RoboCore.
  
  Faça o download da última versão da biblioteca SerialRelay em:
  https://github.com/RoboCore/SerialRelay
  
**************************************************************/

#include <SerialRelay.h>
SerialRelay relays(4, 5, 1); // (data, clock, número de módulos)

#define BLYNK_PRINT Serial

#include "ESP8266_Lib.h"
#include "BlynkSimpleShieldEsp8266.h"

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "seu-token-aqui";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "sua-rede-wifi-aqui";
char pass[] = "sua-senha-da-rede-wifi-aqui";

#include "SoftwareSerial.h"
SoftwareSerial EspSerial(10, 11); // RX, TX

#define ESP8266_BAUD 9600

ESP8266 wifi(&EspSerial);

BLYNK_WRITE(V0){
  int pinValue = param.asInt();
  //Serial.println(pinValue);
  if (pinValue == 1) {
    relays.SetRelay(1, SERIAL_RELAY_ON, 1);   // liga o relé 01
  } else {
    relays.SetRelay(1, SERIAL_RELAY_OFF, 1);  // desliga o relé 01
  }
}

BLYNK_WRITE(V1){
  int pinValue = param.asInt();
  //Serial.println(pinValue);
  if (pinValue == 1) {
    relays.SetRelay(2, SERIAL_RELAY_ON, 1);   // liga o relé 02
  } else {
    relays.SetRelay(2, SERIAL_RELAY_OFF, 1);  // desliga o relé 02
  }
}

BLYNK_WRITE(V2){
  int pinValue = param.asInt();
  //Serial.println(pinValue);
  if (pinValue == 1) {
    relays.SetRelay(3, SERIAL_RELAY_ON, 1);   // liga o relé 03
  } else {
    relays.SetRelay(3, SERIAL_RELAY_OFF, 1);  // desliga o relé 03
  }
}

BLYNK_WRITE(V3){
  int pinValue = param.asInt();
  //Serial.println(pinValue);
  if (pinValue == 1) {
    relays.SetRelay(4, SERIAL_RELAY_ON, 1);   // liga o relé 04
  } else {
    relays.SetRelay(4, SERIAL_RELAY_OFF, 1);  // desliga o relé 04
  }
}

void setup(){
  Serial.begin(9600);
  delay(10);
  EspSerial.begin(ESP8266_BAUD);
  delay(10);
  Blynk.begin(auth, wifi, ssid, pass);
}

void loop(){
  Blynk.run();
}