Last active
April 11, 2024 08:01
-
-
Save Ruchip16/56f418a397c47d53d4f0e80abe5b1b08 to your computer and use it in GitHub Desktop.
2. ios_vrf_global + ios_vrf_address_family
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| module: ios_vrf_address_family | |
| short_description: Resource module to configure VRF definitions. | |
| description: This module provides declarative management of VRF definitions on Cisco IOS. | |
| version_added: 7.0.0 | |
| author: Ruchi Pakhle (@Ruchip16) | |
| notes: | |
| - Tested against Cisco IOSXE version 17.3 on CML. | |
| - This module works with connection C(network_cli). | |
| See U(https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html) | |
| options: | |
| config: | |
| description: A list of device configurations for VRF. | |
| type: list | |
| elements: dict | |
| suboptions: | |
| name: | |
| description: Name of the VRF. | |
| type: str | |
| required: true | |
| address_families: | |
| description: Enable address family and enter its config mode - AFI/SAFI configuration | |
| type: list | |
| elements: dict | |
| suboptions: | |
| afi: | |
| description: Address Family Identifier (AFI) | |
| type: str | |
| choices: ['ipv4', 'ipv6'] | |
| safi: | |
| description: Address Family modifier | |
| type: str | |
| choices: ['multicast', 'unicast'] | |
| bgp: &bgp01 | |
| description: Commands pertaining to BGP configuration. | |
| type: dict | |
| suboptions: | |
| next_hop: | |
| description: Next-hop for the routes of a VRF in the backbone. | |
| type: dict | |
| suboptions: | |
| loopback: | |
| description: Loopback interface for next-hop | |
| type: int | |
| export: &export | |
| description: VRF export | |
| type: dict | |
| suboptions: | |
| map: | |
| description: Route-map name | |
| type: str | |
| ipv4: | |
| description: Address family based VRF export | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: Export prefixes to IPv4 Multicast table | |
| type: dict | |
| suboptions: | |
| prefix: | |
| description: Upper limit on export prefixes without hogging memory | |
| type: int | |
| map: | |
| description: Route-map name | |
| type: str | |
| unicast: | |
| description: Export prefixes to IPv4 Unicast table | |
| type: dict | |
| suboptions: | |
| prefix: | |
| description: Upper limit on export prefixes without hogging memory | |
| type: int | |
| map: | |
| description: Route-map name | |
| type: str | |
| import_config: &import01 | |
| description: VRF import | |
| type: dict | |
| suboptions: | |
| map: | |
| description: Route-map name | |
| type: str | |
| ipv4: | |
| description: Address family based VRF import | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: Import prefixes from IPv4 Multicast table | |
| type: dict | |
| suboptions: | |
| prefix: | |
| description: Upper limit on import prefixes without hogging memory | |
| type: int | |
| map: | |
| description: Route-map name | |
| type: str | |
| unicast: | |
| description: Import prefixes from IPv4 Unicast table | |
| type: dict | |
| suboptions: | |
| limit: | |
| description: Upper limit on import prefixes without hogging memory | |
| type: int | |
| map: | |
| description: Route-map based VRF import | |
| type: dict | |
| suboptions: | |
| route_map: | |
| description: VRF import route-map name | |
| type: dict | |
| suboptions: | |
| allow_evpn: | |
| description: allow Global->VRF routes into EVPN | |
| type: bool | |
| maximum: &maximum | |
| description: Set a limit to a routing table | |
| type: dict | |
| suboptions: | |
| routes: | |
| description: Maximum number of routes allowed in the routing table | |
| type: dict | |
| suboptions: | |
| limit: | |
| description: Maximum number of routes allowed | |
| type: dict | |
| suboptions: | |
| threshold: | |
| description: Threshold value (%) at which to generate a warning msg | |
| type: dict | |
| reinstall: | |
| description: Reinstall previous rejected route due to over maximum route limit | |
| type: dict | |
| suboptions: | |
| threshold: | |
| description: Threshold value (%) at which to reinstall routes back to VRF | |
| type: int | |
| warning_only: | |
| description: Only give a warning message if limit is exceeded | |
| type: bool | |
| inter_as_hybrid: &inter_as_hybrid | |
| description: Inter AS hybrid mode | |
| type: dict | |
| suboptions: | |
| csc: | |
| description: Carrier Supporting Carrier | |
| type: dict | |
| suboptions: | |
| next_hop: &next_hop | |
| description: Next-hop for the routes of a VRF in the backbone. | |
| type: dict | |
| suboptions: | |
| ip_address: | |
| description: Next-hop IP address | |
| type: str | |
| next_hop: *next_hop | |
| mdt: | |
| description: Backbone Multicast Distribution Tree | |
| type: dict | |
| suboptions: | |
| auto_discovery: | |
| description: BGP auto-discovery for MVPN | |
| type: dict | |
| suboptions: | |
| ingress_replication: | |
| description: BGP auto-discovery for Ingress-Replication | |
| type: dict | |
| suboptions: | |
| inter_as: | |
| description: Enable Inter-AS BGP auto-discovery | |
| type: dict | |
| suboptions: | |
| mdt_hello_enable: &mdt_hello_enable | |
| description: Enable PIM Hellos over MDT interface | |
| type: bool | |
| mdt_hello_enable: *mdt_hello_enable | |
| pim: | |
| description: BGP auto-discovery for PIM | |
| type: dict | |
| suboptions: | |
| inter_as: | |
| description: Enable Inter-AS BGP auto-discovery | |
| type: dict | |
| suboptions: | |
| mdt_hello_enable: *mdt_hello_enable | |
| pim_tlv_announce: | |
| description: Announce PIM TLV for data MDT | |
| type: dict | |
| suboptions: | |
| mdt_hello_enable: *mdt_hello_enable | |
| mdt_hello_enable: *mdt_hello_enable | |
| pim_tlv_announce: | |
| description: Announce PIM TLV for data MDT | |
| type: bool | |
| receiver_site: | |
| description: BGP receiver only site for MVPN | |
| type: bool | |
| data: | |
| description: MDT data trees | |
| type: dict | |
| suboptions: | |
| ingress_replication: | |
| description: Use Ingress-Replication to create the data MDT | |
| type: dict | |
| suboptions: | |
| number: | |
| description: Number of data MDT | |
| type: int | |
| immediate_swich: | |
| description: Switch immediately to Data MDT tree | |
| type: bool | |
| list: &list | |
| description: Access-list | |
| type: dict | |
| suboptions: | |
| access_list_number: | |
| description: Access-list number | |
| type: int | |
| name: | |
| description: IP Named Extended Access list | |
| type: str | |
| list: *list | |
| threshold: | |
| description: MDT switching threshold | |
| type: int | |
| default: | |
| description: Default MDT configuration | |
| type: dict | |
| suboptions: | |
| ingress_replication: | |
| description: Use Ingress-Replication for the default MDT | |
| type: bool | |
| direct: | |
| description: Direct MDT's | |
| type: bool | |
| log_reuse: | |
| description: Event logging for data MDT reuse | |
| type: bool | |
| mode: | |
| description: The type of encapsulation | |
| type: bool | |
| choices: ['gre', 'GRE'] | |
| mtu: | |
| description: The MTU | |
| type: int | |
| overlay: | |
| description: MDT overlay Protocol | |
| type: dict | |
| suboptions: | |
| bgp: | |
| description: BGP Overlay signalling | |
| type: dict | |
| suboptions: | |
| shared_tree_prune_delay: | |
| description: Delay before shared tree is pruned at C-RP PE | |
| type: dict | |
| suboptions: | |
| delay: | |
| description: Delay (in secs) | |
| type: int | |
| source_tree_prune_delay: | |
| description: Delay before source tree is pruned at C-S PE | |
| type: dict | |
| suboptions: | |
| delay: | |
| description: Delay (in secs) | |
| type: int | |
| use_bgp: | |
| description: Use BGP for MDT overlay signaling | |
| type: dict | |
| suboptions: | |
| spt_only: | |
| description: Enable SPT-only ASM mode | |
| type: bool | |
| partitioned: | |
| description: Partitioned Multicast Distribution Tree | |
| type: dict | |
| suboptions: | |
| ingress_replication: | |
| description: Use Ingress-Replication for the partitioned MDT | |
| type: bool | |
| strict_rpf: | |
| description: Enable strict RPF check | |
| type: dict | |
| suboptions: | |
| interface: | |
| description: Interface based strict RPF check | |
| type: bool | |
| protection: | |
| description: Configure local repair | |
| type: dict | |
| suboptions: | |
| local_prefixes: | |
| description: Enable protection for local prefixes | |
| type: bool | |
| route_replicate: &route_replicate | |
| description: Replicate (import) routes from another topology (and another VRF) | |
| type: dict | |
| suboptions: | |
| recursion_policy: | |
| description: Route replication recursion policy | |
| type: dict | |
| suboptions: | |
| destination: | |
| description: Recurse in destination topology | |
| type: bool | |
| from_config: | |
| description: Replicate routes from another VRF | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: Multicast SAFI | |
| type: dict | |
| suboptions: | |
| all: &all | |
| description: All routes | |
| type: dict | |
| suboptions: | |
| route_map: &route_map | |
| description: Route-map reference | |
| type: str | |
| bgp: &bgp | |
| description: Border Gateway Protocol (BGP) | |
| type: dict | |
| suboptions: | |
| as_number: | |
| description: Autonomous System Number | |
| type: int | |
| route_map: *route_map | |
| eigrp: &eigrp | |
| description: Enhanced Interior Gateway Routing Protocol (EIGRP) | |
| type: dict | |
| suboptions: | |
| as_number: | |
| description: Autonomous System Number | |
| type: int | |
| route_map: *route_map | |
| isis: &isis | |
| description: Intermediate System-to-Intermediate System (ISIS) | |
| type: dict | |
| suboptions: | |
| iso_tag: | |
| description: ISO routing area tag | |
| type: str | |
| route_map: *route_map | |
| mobile: &mobile | |
| description: Mobile routes | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| odr: &odr | |
| description: On-Demand Stub routes | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| ospf: &ospf | |
| description: Open Shortest Path First (OSPF) | |
| type: dict | |
| suboptions: | |
| process_id: | |
| description: OSPF process ID | |
| type: int | |
| route_map: *route_map | |
| rip: &rip | |
| description: Routing Information Protocol (RIP) | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| static: &static | |
| description: Static routes | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| topology: &topology | |
| description: Topology name | |
| type: dict | |
| suboptions: | |
| base: | |
| description: Base topology | |
| type: dict | |
| suboptions: | |
| all: *all | |
| bgp: *bgp | |
| eigrp: *eigrp | |
| isis: *isis | |
| mobile: *mobile | |
| odr: *odr | |
| ospf: *ospf | |
| rip: *rip | |
| static: *static | |
| unicast: | |
| description: Unicast SAFI | |
| type: dict | |
| suboptions: | |
| all: *all | |
| bgp: *bgp | |
| connected: | |
| description: Connected routes | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| eigrp: *eigrp | |
| isis: *isis | |
| mobile: *mobile | |
| odr: *odr | |
| ospf: *ospf | |
| rip: *rip | |
| static: *static | |
| vrf: | |
| description: Specify a source VRF | |
| type: dict | |
| suboptions: | |
| name: | |
| description: Source VRF name | |
| type: str | |
| global: | |
| description: global VRF | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: Multicast SAFI | |
| type: dict | |
| suboptions: | |
| all: *all | |
| bgp: *bgp | |
| eigrp: *eigrp | |
| isis: *isis | |
| mobile: *mobile | |
| odr: *odr | |
| ospf: *ospf | |
| rip: *rip | |
| static: *static | |
| topology: *topology | |
| unicast: | |
| description: Unicast SAFI | |
| type: dict | |
| suboptions: | |
| all: *all | |
| bgp: *bgp | |
| connected: | |
| description: Connected routes | |
| type: dict | |
| suboptions: | |
| route_map: *route_map | |
| eigrp: *eigrp | |
| isis: *isis | |
| mobile: *mobile | |
| odr: *odr | |
| ospf: *ospf | |
| rip: *rip | |
| static: *static | |
| route_replicate_distance: &route_replicate_distance | |
| description: Route replicate distance | |
| type: dict | |
| suboptions: | |
| from_config: | |
| description: Route replicate distance from another VRF | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: Multicast SAFI | |
| type: dict | |
| suboptions: | |
| distance: | |
| description: Route replicate distance range | |
| type: int | |
| topology: &id001 | |
| description: Specify a Routing Topology | |
| type: dict | |
| suboptions: | |
| base: | |
| description: Base routing topology | |
| type: dict | |
| suboptions: | |
| distance: | |
| description: Route replicate distance range | |
| type: int | |
| unicast: | |
| description: Unicast SAFI | |
| type: dict | |
| suboptions: | |
| distance: | |
| description: Route replicate distance range | |
| type: int | |
| topology: *id001 | |
| route_target: &route_target | |
| description: Specify Target VPN Extended Communities. | |
| type: dict | |
| suboptions: | |
| export: | |
| description: Export Target-VPN community. | |
| type: str | |
| import_config: | |
| description: Export Target-VPN community. | |
| type: str | |
| both: | |
| description: Both export and import Target-VPN community | |
| type: str | |
| snmp: &snmp | |
| description: Modify snmp parameters | |
| type: dict | |
| suboptions: | |
| context: | |
| description: Configure a SNMP context | |
| type: dict | |
| suboptions: | |
| name: | |
| description: SNMP context name | |
| type: str | |
| community: | |
| description: Configure a SNMP v2c Community string and access privileges. | |
| type: dict | |
| suboptions: | |
| name: | |
| description: SNMP community string | |
| type: str | |
| access_number: | |
| description: Access-list number | |
| type: int | |
| access_name: | |
| description: Access-list name | |
| type: str | |
| ipv6: | |
| description: Specify IPv6 Named Access-List | |
| type: str | |
| mode: | |
| description: SNMP community mode | |
| type: str | |
| choices: ['ro', 'rw'] | |
| user: | |
| description: Configure a SNMP v3 user | |
| type: dict | |
| suboptions: | |
| name: | |
| description: SNMP user name | |
| type: str | |
| access: &access | |
| description: Specify an access-list associated with this group | |
| type: dict | |
| suboptions: | |
| number: | |
| description: Access-list number | |
| type: int | |
| name: | |
| description: Access-list name | |
| type: str | |
| ipv6: | |
| description: Specify IPv6 Named Access-List | |
| type: str | |
| auth: | |
| description: SNMP user authentication parameters | |
| type: dict | |
| suboptions: | |
| md5: | |
| description: Use HMAC MD5 algorithm for authentication | |
| type: dict | |
| suboptions: | |
| password: | |
| description: authentication password for user | |
| type: str | |
| access: *access | |
| priv: &priv | |
| description: encryption parameters for the user | |
| type: dict | |
| suboptions: | |
| 3des: | |
| description: Use 168 bit 3DES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: SNMP user password | |
| type: str | |
| access: *access | |
| des: | |
| description: Use 56 bit DES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: SNMP user password | |
| type: str | |
| access: *access | |
| aes: | |
| description: Use AES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| 128: | |
| description: Use 128 bit AES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: privacy password for user | |
| type: str | |
| access: *access | |
| 192: | |
| description: Use 192 bit AES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: privacy password for user | |
| type: str | |
| access: *access | |
| 256: | |
| description: Use 256 bit AES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: privacy password for user | |
| type: str | |
| access: *access | |
| des56: | |
| description: Use 56 bit DES algorithm for encryption | |
| type: dict | |
| suboptions: | |
| password: | |
| description: SNMP user password | |
| type: str | |
| access: *access | |
| encrypted: | |
| description: Specify passwords as MD5 or SHA digests | |
| type: bool | |
| sha: | |
| description: Use HMAC MD5 algorithm for authentication | |
| type: dict | |
| suboptions: | |
| password: | |
| description: SNMP user password | |
| type: str | |
| access: *access | |
| priv: *priv | |
| credential: | |
| description: If the user password is already configured and saved | |
| type: str | |
| encrypted: | |
| description: Specifying passwords as MD5 or SHA digests | |
| type: bool | |
| topology: | |
| description: Configure a VRF topology | |
| type: dict | |
| suboptions: | |
| base: | |
| description: Base topology | |
| type: str | |
| name: | |
| description: Topology name | |
| type: str | |
| all_interfaces: | |
| description: Associate a non-base routing topology with all interfaces | |
| type: bool | |
| bgp: *bgp01 | |
| export: *export | |
| import_config: *import01 | |
| maximum: *maximum | |
| snmp: *snmp | |
| route_replicate: *route_replicate | |
| route_replicate_distance: *route_replicate_distance | |
| route_target: *route_target | |
| inter_as_hybrid: *inter_as_hybrid | |
| use_topology: | |
| description: Configure the unicast topology to be used | |
| type: dict | |
| suboptions: | |
| unicast: | |
| description: Sub Address Family | |
| type: dict | |
| suboptions: | |
| base: | |
| description: Base topology | |
| type: bool | |
| name: | |
| description: Topology name | |
| type: str | |
| running_config: | |
| description: | |
| - This option is used only with state I(parsed). | |
| - The value of this option should be the output received from the IOS device by | |
| executing the command B(show running-config vrf). | |
| - The state I(parsed) reads the configuration from C(running_config) option and | |
| transforms it into Ansible structured data as per the resource module's argspec | |
| and the value is then returned in the I(parsed) key within the result. | |
| type: str | |
| state: | |
| choices: [parsed, gathered, deleted, merged, replaced, rendered, overridden] | |
| default: merged | |
| description: | |
| - The state the configuration should be left in | |
| - The states I(rendered), I(gathered) and I(parsed) does not perform any change | |
| on the device. | |
| - The state I(rendered) will transform the configuration in C(config) option to | |
| platform specific CLI commands which will be returned in the I(rendered) key | |
| within the result. For state I(rendered) active connection to remote host is | |
| not required. | |
| - The state I(gathered) will fetch the running configuration from device and transform | |
| it into structured data in the format as per the resource module argspec and | |
| the value is returned in the I(gathered) key within the result. | |
| - The state I(parsed) reads the configuration from C(running_config) option and | |
| transforms it into JSON format as per the resource module parameters and the | |
| value is returned in the I(parsed) key within the result. The value of C(running_config) | |
| option should be the same format as the output of command I(show running-config vrf). | |
| connection to remote host is not required. | |
| type: str |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| module: ios_vrf_global | |
| short_description: Resource module to configure VRF definitions. | |
| description: This module provides declarative management of VRF definitions on Cisco IOS. | |
| version_added: 7.0.0 | |
| author: Ruchi Pakhle (@Ruchip16) | |
| notes: | |
| - Tested against Cisco IOSXE version 17.3 on CML. | |
| - This module works with connection C(network_cli). | |
| See U(https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html) | |
| options: | |
| config: | |
| description: A list of device configurations for VRF. | |
| type: list | |
| elements: dict | |
| suboptions: | |
| name: | |
| description: Name of the VRF. | |
| type: str | |
| required: true | |
| description: | |
| description: VRF specific description | |
| type: str | |
| ipv4: | |
| description: VRF IPv4 configuration | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: IP Multicast configuration | |
| type: bool | |
| ipv6: | |
| description: VRF IPv6 configuration | |
| type: dict | |
| suboptions: | |
| multicast: | |
| description: IP Multicast configuration | |
| type: bool | |
| rd: | |
| description: Specify Route Distinguisher (RD). | |
| type: str | |
| route_target: | |
| description: Specify Target VPN Extended Communities. | |
| type: dict | |
| suboptions: | |
| export: | |
| description: Export Target-VPN community. | |
| type: str | |
| import_config: | |
| description: Export Target-VPN community. | |
| type: str | |
| both: | |
| description: Both export and import Target-VPN community | |
| type: str | |
| vnet: | |
| description: Virtual NETworking configuration. | |
| type: dict | |
| suboptions: | |
| tag: | |
| description: Identifier used to tag packets associated with this VNET | |
| type: int | |
| vpn: | |
| description: Configure VPN ID for the VRF as specified in RFC 2685 | |
| type: dict | |
| suboptions: | |
| id: | |
| description: Configure VPN ID in RFC 2685 format | |
| type: str | |
| running_config: | |
| description: | |
| - This option is used only with state I(parsed). | |
| - The value of this option should be the output received from the IOS device by | |
| executing the command B(show running-config vrf). | |
| - The state I(parsed) reads the configuration from C(running_config) option and | |
| transforms it into Ansible structured data as per the resource module's argspec | |
| and the value is then returned in the I(parsed) key within the result. | |
| type: str | |
| state: | |
| choices: [parsed, gathered, deleted, merged, replaced, rendered, overridden] | |
| default: merged | |
| description: | |
| - The state the configuration should be left in | |
| - The states I(rendered), I(gathered) and I(parsed) does not perform any change | |
| on the device. | |
| - The state I(rendered) will transform the configuration in C(config) option to | |
| platform specific CLI commands which will be returned in the I(rendered) key | |
| within the result. For state I(rendered) active connection to remote host is | |
| not required. | |
| - The state I(gathered) will fetch the running configuration from device and transform | |
| it into structured data in the format as per the resource module argspec and | |
| the value is returned in the I(gathered) key within the result. | |
| - The state I(parsed) reads the configuration from C(running_config) option and | |
| transforms it into JSON format as per the resource module parameters and the | |
| value is returned in the I(parsed) key within the result. The value of C(running_config) | |
| option should be the same format as the output of command I(show running-config vrf). | |
| connection to remote host is not required. | |
| type: str |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment