Run Klipper + Moonraker + Mainsail + KlipperScreen on an Android device using Linux Deploy

readme.md

Using Android to run Klipper, Moonraker, Mainsail/Fuidd, and KlipperScreen

This gist is no longer maintained. Please visit d4rk50ul1's repo instead
This gist is no longer maintained. Please visit d4rk50ul1's repo instead
This gist is no longer maintained. Please visit d4rk50ul1's repo instead

Consider everything below to be outdated

Requirements

• A rooted Android device.
• Linux Deploy app: https://play.google.com/store/apps/details?id=ru.meefik.linuxdeploy
• XServer app: https://play.google.com/store/apps/details?id=x.org.server
• Init scripts for Klipper and Moonraker (in this gist).
• XTerm script for KlipperScreen (in this gist).

Setup Instructions

• Install Linux Deploy.

• Install XServer XSDL.

• Create a container within Linux Deploy using the following settings:

  • Bootstrap:
    • Distro: Debian (buster)
    • Installation type: Directory
      Note: You can choose File but make sure it's large enough as you can't resize it later and 2 GB is not enough.
    • Installation path: /data/local/debian
      Note: You can choose a different location but if it's within ${EXTERNALDATA} then SSH may fail to start.
    • User name: android
      Note: You can choose something else if you make sure to update the scripts in this gist accordingly.
  • Init:
    • Enable: yes
    • Init system: sysv
  • SSH:
    • Enable: yes
  • GUI:
    • Enable: yes
    • Graphics subsystem: X11
    • Desktop environment: XTerm

• SSH into the container.

• Install Git and KIAUH:

  sudo apt install git
  git clone https://github.com/th33xitus/kiauh.git

• Install Klipper, Moonraker, Mainsail (or Fluidd), and KlipperScreen:

  kiauh/kiauh.sh

  Note: KlipperScreen in particular will take a very long time (tens of minutes).

• Find your printer's serial device for use in Klipper's printer.cfg:
  It will likely be /dev/ttyACM0 or /dev/ttyUSB0. Check if either of those appear/disappear under /dev/ when plugging/unplugging your printer.

  If you cannot find your printer in /dev/, then you can install the Octo4a app which includes a custom implementation of the CH34x driver. You don't need to run OctoPrint within it, but you will need to run the Octo4a app. To do this:

  • Install Octo4a from https://github.com/feelfreelinux/octo4a/releases
  • Run Octo4a and let it install OctoPrint (optionally tap the Stop button once it's done installing).
  • Make sure Octo4a sees your printer (it will be listed with a checked-box next to it).
  • Install Termux from https://f-droid.org/en/packages/com.termux
  • Run Termux and find the serial device created by Octo4a:

    pkg install tsu
    sudo ls -al /data/data/com.octo4a/files/serialpipe

    You should see that /data/data/com.octo4a/files/serialpipe is a link to /dev/pts/0 or similar. Whatever it's linked to is the serial port you should use in printer.cfg. You can uninstall Termux after this as it's not needed for anything else.

• Make the serial device accessible to Klipper:

  sudo chmod 777 /dev/ttyACM0
  # or 
  sudo chmod 777 /dev/ttyUSB0
  # or 
  sudo chmod 777 /dev/pts/0

• Install the init and xterm scripts from this gist:

  sudo wget -O /etc/default/klipper https://gist.github.com/RyanEwen/ae81fc48ad00397f1026915f0e6beed9/raw/58f2834497b2733c03ca42c9bf41b2b3d79d9319/etc_default_klipper
  sudo wget -O /etc/init.d/klipper https://gist.github.com/RyanEwen/ae81fc48ad00397f1026915f0e6beed9/raw/58f2834497b2733c03ca42c9bf41b2b3d79d9319/etc_init.d_klipper
  sudo wget -O /etc/default/moonraker https://gist.github.com/RyanEwen/ae81fc48ad00397f1026915f0e6beed9/raw/58f2834497b2733c03ca42c9bf41b2b3d79d9319/etc_default_moonraker
  sudo wget -O /etc/init.d/moonraker https://gist.github.com/RyanEwen/ae81fc48ad00397f1026915f0e6beed9/raw/58f2834497b2733c03ca42c9bf41b2b3d79d9319/etc_init.d_moonraker
  sudo wget -O /usr/local/bin/xterm https://gist.github.com/RyanEwen/ae81fc48ad00397f1026915f0e6beed9/raw/58f2834497b2733c03ca42c9bf41b2b3d79d9319/usr_local_bin_xterm
  
  sudo chmod +x /etc/init.d/klipper 
  sudo chmod +x /etc/init.d/moonraker 
  sudo chmod +x /usr/local/bin/xterm
  
  sudo update-rc.d klipper defaults
  sudo update-rc.d moonraker defaults

• Stop the Debian container.

• Start XServer XSDL.

  • One time setup:
    • Tap 'Change Device Configuration'
    • Change Mouse Emulation Mode to Desktop, No Emulation

• Start the Debian container.

• KlipperScreen should appear in XServer XSDL and Mainsail and/or Fluidd should be accesible using your Android device's IP address in a browser.

Misc

You can start/stop Klipper and Moonraker manually by using the service command (eg: sudo service start klipper).
Logs can be found in /home/android/klipper_logs.

etc_default_klipper

# Configuration for /etc/init.d/klipper

KLIPPY_USER=android
KLIPPY_CONFIG=/home/$KLIPPY_USER/klipper_config/printer.cfg
KLIPPY_LOG=/home/$KLIPPY_USER/klipper_logs/klippy.log
KLIPPY_SOCKET=/tmp/klippy_uds
KLIPPY_PRINTER=/tmp/printer
KLIPPY_EXEC=/home/$KLIPPY_USER/klippy-env/bin/python
KLIPPY_ARGS="/home/$KLIPPY_USER/klipper/klippy/klippy.py $KLIPPY_CONFIG -l $KLIPPY_LOG -a $KLIPPY_SOCKET"

etc_default_moonraker

# Configuration for /etc/init.d/moonraker

MOONRAKER_USER=android
MOONRAKER_CONFIG=/home/$MOONRAKER_USER/klipper_config/moonraker.conf
MOONRAKER_LOG=/home/$MOONRAKER_USER/klipper_logs/moonraker.log
MOONRAKER_SOCKET=/tmp/moonraker_uds
MOONRAKER_PRINTER=/tmp/printer
MOONRAKER_EXEC=/home/$MOONRAKER_USER/moonraker-env/bin/python
MOONRAKER_ARGS="/home/$MOONRAKER_USER/moonraker/moonraker/moonraker.py -c $MOONRAKER_CONFIG -l $MOONRAKER_LOG"

etc_init.d_klipper

#!/bin/sh
# System startup script for Klipper 3d-printer host code

### BEGIN INIT INFO
# Provides:          klipper
# Required-Start:    $local_fs
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Klipper daemon
# Description:       Starts the Klipper daemon.
### END INIT INFO

PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
DESC="klipper daemon"
NAME="klipper"
DEFAULTS_FILE=/etc/default/klipper
PIDFILE=/var/run/klipper.pid

. /lib/lsb/init-functions

# Read defaults file
[ -r $DEFAULTS_FILE ] && . $DEFAULTS_FILE

case "$1" in
start)  log_daemon_msg "Starting" $NAME
        start-stop-daemon --start --quiet --exec $KLIPPY_EXEC \
                          --background --pidfile $PIDFILE --make-pidfile \
                          --chuid $KLIPPY_USER --user $KLIPPY_USER \
                          -- $KLIPPY_ARGS
        log_end_msg $?
        ;;
stop)   log_daemon_msg "Stopping" $NAME
        killproc -p $PIDFILE $KLIPPY_EXEC
        RETVAL=$?
        [ $RETVAL -eq 0 ] && [ -e "$PIDFILE" ] && rm -f $PIDFILE
        log_end_msg $RETVAL
        ;;
restart) log_daemon_msg "Restarting" $NAME
        $0 stop
        $0 start
        ;;
reload|force-reload)
        log_daemon_msg "Reloading configuration not supported" $NAME
        log_end_msg 1
        ;;
status)
        status_of_proc -p $PIDFILE $KLIPPY_EXEC $NAME && exit 0 || exit $?
        ;;
*)      log_action_msg "Usage: /etc/init.d/klipper {start|stop|status|restart|reload|force-reload}"
        exit 2
        ;;
esac
exit 0

etc_init.d_moonraker

#!/bin/sh
# System startup script for Moonraker API for Klipper

### BEGIN INIT INFO
# Provides:          moonraker
# Required-Start:    $local_fs $remote_fs klipper
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Moonraker daemon
# Description:       Starts the Moonraker daemon.
### END INIT INFO

PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
DESC="moonraker daemon"
NAME="moonraker"
DEFAULTS_FILE=/etc/default/moonraker
PIDFILE=/var/run/moonraker.pid

. /lib/lsb/init-functions

# Read defaults file
[ -r $DEFAULTS_FILE ] && . $DEFAULTS_FILE

case "$1" in
start)  log_daemon_msg "Starting" $NAME
        start-stop-daemon --start --quiet --exec $MOONRAKER_EXEC \
                          --background --pidfile $PIDFILE --make-pidfile \
                          --chuid $MOONRAKER_USER --user $MOONRAKER_USER \
                          -- $MOONRAKER_ARGS
        log_end_msg $?
        ;;
stop)   log_daemon_msg "Stopping" $NAME
        killproc -p $PIDFILE $MOONRAKER_EXEC
        RETVAL=$?
        [ $RETVAL -eq 0 ] && [ -e "$PIDFILE" ] && rm -f $PIDFILE
        log_end_msg $RETVAL
        ;;
restart) log_daemon_msg "Restarting" $NAME
        $0 stop
        $0 start
        ;;
reload|force-reload)
        log_daemon_msg "Reloading configuration not supported" $NAME
        log_end_msg 1
        ;;
status)
        status_of_proc -p $PIDFILE $MOONRAKER_EXEC $NAME && exit 0 || exit $?
        ;;
*)      log_action_msg "Usage: /etc/init.d/moonraker {start|stop|status|restart|reload|force-reload}"
        exit 2
        ;;
esac
exit 0

usr_local_bin_xterm

#!/bin/bash

KLIPPERSCREEN_USER=android
KLIPPERSCREEN_CONFIG=/home/$KLIPPERSCREEN_USER/klipper_config/KlipperScreen.conf
KLIPPERSCREEN_LOG=/home/$KLIPPERSCREEN_USER/klipper_logs/KlipperScreen.log

/home/$KLIPPERSCREEN_USER/.KlipperScreen-env/bin/python /home/$KLIPPERSCREEN_USER/KlipperScreen/screen.py -c $KLIPPERSCREEN_CONFIG -l $KLIPPERSCREEN_LOG

There's an alternative in the works that you guys might find interesting: https://github.com/thingsapart/octo4a/tree/ubuntu-klipper-rebase

This one is a fork of Octo4a modified to run Ubuntu instead of Alpine via proot, and Klipper etc instead of Octoprint within that.

Did anyone get Klipper4A to run on his device ?

I tried to use this because I couldn't successfuly run it with linux deploy and my Artillery Genius Pro & OnePlus7Pro.

With the Klipper4A I have following issue in the logs:
START
proot error: '/usr/bin/sudo' not found (root = /data/data/com.klipper4a/files/bootstrap/bootstrap, cwd = /home/klipper, $PATH=(null))

I know that its pre alpha, just wanted to know if someone already tried it and got it working :)

Check the links to github at the top. I made mine work with a lenovo tab, no issues so far.

Hey,

thank you for the reminder :)

Actually I already tried your instructions and still couldn't get it to work.

My issue is:
Klipper doesn't get recognized by Mainsail or Klipperscreen.
I think the connection between the phone and printer is not working.

I also played a bit with the octo4a drivers and reflashed klipper a couple of times with no results.

Btw I think you should include the driver trying in octo4a in your instructions (maybe under the troubleshooting section) :)

I probably try it again when I find the time to install an Android 11 Custom Rom on my Oneplus 7 Pro (Stock Android and not OxygenOS).

Also I run Android 12 Beta on the Phone, which may Also be an error source.
I'll post an update on that

Okay so I just installed an AOSP ROM on my Oneplus 7 Pro and followed the updated instructions on the git page from d4rk50ul1:

It didn't work for me again.

I followed the instructions carefully (e.g. changed only the debian parameters that were mentioned, rest untouched) in the order of the instruction.

I can't get an connection between klipper and the phone.
I'll reflash klipper on my printer tomorrow just to be sure I didn't miss something.

Also I noticed:
I can't execute the moonracker path fix because the Script can't find "moonracker-config" under "klipper-config" directory.
And I can confirm I don't have this directory.

The only positive:
The Error on klipper4a vanished.
Even tho I don't know how to ssh on it

Please check on the issues part on github https://github.com/d4rk50ul1/klipper-on-android/issues?q=is%3Aissue+is%3Aclosed
there's a couple of conversations that mention the same case adn couple of fixes made plus the scripts have been fixed.
latest kiauh version made a bunch of changes on folders and symlinks so you might have not caught up on those.

not sure what is klipper4a so i cannot help you now.

Thank you for the quick reply ! 😄

I think I try some Things from this ticket:

d4rk50ul1/klipper-on-android#9

@d4rk50ul1 I need your help about linux deploy and configuring correct driver for printer

@Saurabh251-cmd give me more details.

I have successfully installed debian,linux diploy on phone and can connect to xshell but issue is


its right?
Im having this issue even after starting services-

Please guide me further to setup-

After restarting phone this is issue-

:(

can you please share your configuration here:

issue solved by reinstalling but still i will share u-

![WhatsApp Image 2022-12-06 at 10 04 46 PM](https://user-images.githubusercontent.com/119947

991/205970392-941b719b-45cd-43e8-9488-86b1fa749d1b.jpeg)

@Saurabh251-cmd Is your Phone Rooted? Have you tried reinstalling Xdsl Server? not sure what can it be... @ZerGo0 any ideas?

Ya it's rooted, successfully installed debian etc but now issue is -

Did you run all the ending scripts?
did you check on klippy.log and see if there is something not properly set up?
did you do printer.cfg config>?
just going over several considerations needed for this to work...

how to fix this :<

this is mostly configuration for your printer, now you must go to klipper page and seek for templates for your printer reference.

Thank u,i will try btw can i use obico or something to stream live print ?

can anyone help me? termux shows my mcu as pts/15, I fixed it in printer.cfg but still can't connect

Can you please share your printer.cfg MCU section?
Did you chmod your /dev/pts/15?

[mcu]
serial: /dev/pts/20
restart_method: command

this is what's in printer.cfg, every time I restart my machine and I check with termux the dev/pts/xxx changes again, now it's 20

NEED HELP!
When I execute the copy command:

bash configuration_klipper_family.sh

I receive the following message:

Can you Help me! I'm install and uninstall Klipper many times. No results...

can anyone help me? termux shows my mcu as pts/15, I fixed it in printer.cfg but still can't connect

how you fix it?

i have same problem with this, can anyone tell me how to fix it?