SwayWM Config

status.php

<?php

$timezone = `timedatectl`;
$volume = `pactl get-sink-volume @DEFAULT_SINK@`;
$mute = `pactl get-sink-mute @DEFAULT_SINK@`;
$brightnessCurrent = `brightnessctl get`;
$brightnessMax = `brightnessctl max`;
$battery = `cat /sys/class/power_supply/BAT0/capacity`;

$timezone = preg_match('%Time zone: ([\w/]+)%', $timezone, $matches);
$timezone = $matches[1];
date_default_timezone_set($timezone);

$volume = trim($volume);
if (preg_match('/(\d+)%/', $volume, $volume)) $volume = $volume[1];

$mute = trim($mute);
$mute = preg_match('/ yes/', $mute);
if ($mute) $volume = '-';


$brightnessCurrent = trim($brightnessCurrent);
$brightnessMax = trim($brightnessMax);
$brightnessPercent = round($brightnessCurrent / $brightnessMax * 100);

$battery = trim($battery);

$time = date('d-m-Y h:i:s a');

echo implode(' | ', [
	"VOL $volume%",
	"SCR $brightnessPercent",
	"BAT $battery",
	$time
]);

sway.cfg

# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l
# Your preferred terminal emulator
set $term foot
# Your preferred application launcher
set $menu wmenu-run

### Output configuration
#
# Default wallpaper (more resolutions are available in @datadir@/backgrounds/sway/)
# output * bg @datadir@/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
# External Monitor (ports)
output DP-1 position 0,0 
output DP-2 position 0,0
output DP-6 position 0,0
output HDMI-A-1 position 0,0
# Laptop Monitor
output eDP-2 scale 1.5

#
# You can get the names of your outputs by running: swaymsg -t get_outputs

### Idle configuration
#
# Example configuration:
#
exec swayidle -w \
         timeout 300 'swaylock -f -c 000000' \
         timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
         before-sleep 'swaylock -f -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
  input "1267:12695:ELAN067A:00_04F3:3197_Touchpad" {
      dwt enabled
      tap enabled
      natural_scroll enabled
      middle_emulation enabled
  }

  input "type:keyboard" {
      repeat_delay 200
      repeat_rate 50
  }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Kill focused window
    bindsym $mod+Shift+q kill

    # Start your launcher
    bindsym $mod+d exec $menu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    set $mode_system System [l]ogout, [r]estart, [s]hutdown
    mode "$mode_system" {
        bindsym l exec --no-startup-id swaymsg exit, mode "default"
        bindsym r exec --no-startup-id systemctl reboot, mode "default"
        bindsym s exec --no-startup-id systemctl poweroff -i, mode "default"
        bindsym Escape mode "default"
    }
    bindsym $mod+Shift+e mode "$mode_system"
    # bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9
    bindsym $mod+Shift+0 move container to workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"
#
# Utilities:
#
    # Special keys to adjust volume via PulseAudio
    bindsym --locked XF86AudioMute exec pactl set-sink-mute \@DEFAULT_SINK@ toggle
    bindsym --locked XF86AudioLowerVolume exec pactl set-sink-volume \@DEFAULT_SINK@ -5%
    bindsym --locked XF86AudioRaiseVolume exec pactl set-sink-volume \@DEFAULT_SINK@ +5%
    bindsym --locked XF86AudioMicMute exec pactl set-source-mute \@DEFAULT_SOURCE@ toggle
    # Special keys to adjust brightness via brightnessctl
    bindsym --locked XF86MonBrightnessDown exec brightnessctl set 5%-
    bindsym --locked XF86MonBrightnessUp exec brightnessctl set 5%+
    # Special keys to adjust audio media
    bindsym $mod+Ctrl+Up exec --no-startup-id playerctl play
    bindsym $mod+Ctrl+Down exec --no-startup-id playerctl pause
    bindsym $mod+Ctrl+Right exec --no-startup-id playerctl next
    bindsym $mod+Ctrl+Left exec --no-startup-id playerctl previous 
    bindsym $mod+Shift+Ctrl+Right exec --no-startup-id playerctl position 15+
    bindsym $mod+Shift+Ctrl+Left exec --no-startup-id playerctl position 15-
    # Special key to take a screenshot with grim
    bindsym Print exec grim

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
bar {
    position top

    # When the status_command prints a new line to stdout, swaybar updates.
    # The default just shows the current date and time.
    status_command while sh ~/.config/sway/status.sh; do sleep 1; done
    # status_command while date +'%Y-%m-%d %X'; do sleep 1; done

    colors {
        statusline #ffffff
        background #323232
        inactive_workspace #32323200 #32323200 #5c5c5c
    }
}

include @sysconfdir@/sway/config.d/*