Katie Chapman SemanticallyNull

⚠️ First, a word of warning
This is just a list of things I did to see if I could enable it... And I could. There's really no guarantee that any of this will actually work, and moreso it could break at any point and you're very much on your own at that point. Most importantly, the reset button on the device does not switch back to Router Mode... so if it's broken you may not be able to fix it.

After a conversation with a friend about VM's Hub 2.0 and it's inability to do Modem Mode when IPv6 is enabled I got that drive to explore. Figuring that DSLite is a standard protocol (RFC6333) I figured it wasn't going to be impossible to get running... So that begged the question, can I get the unit into Modem Mode to experiment?

After a great deal of scanning through JS, yes. So once I was logged in I managed to navigate to the Modem page at [http://192.168.0.1/?modem_settings&mid=Modem](http://192.168.0.1/?modem_settings&mid=Mode

Keybase proof

I hereby claim:

I am SemanticallyNull on github.
I am semanticallynull (https://keybase.io/semanticallynull) on keybase.
I have a public key whose fingerprint is 7A5C 53A0 710D 4484 498A 794B C643 48B4 8F5D C8A0

To claim this, I am signing this object:

The Priority value is calculated by first multiplying the Facility number by 8 and then adding the numerical value of the Severity. For example, a kernel message (Facility=0) with a Severity of Emergency (Severity=0) would have a Priority value of 0. Also, a "local use 4" message (Facility=20) with a Severity of Notice (Severity=5) would have a Priority value of 165. In the PRI of a syslog message, these values would be placed between the angle brackets as <0> and <165> respectively. The only time a value of "0" follows the "<" is for the Priority value of "0". Otherwise, leading "0"s MUST NOT be used. – RFC 5424, Section 6.2.1

Severity ➡️	0	1	2	3	4	5	6	7
Facilities ⤵️
kernel (0)	0	1	2	3	4	5	6	7
user (1)	8	9	10	11	12	13	14	15
mail (2)	16	17	18	19	20	21	22	23
system (3)	24	25	26	27	28	29	30

	package main

	import (
	"context"
	"errors"
	"fmt"
	"net"
	"net/http"
	"os/signal"
	"strings"

	package main

	import (
	"fmt"
	"reflect"
	"strings"
	"testing"
	)

	type TestCases struct{}

	-----BEGIN PGP SIGNED MESSAGE-----
	Hash: SHA512

	This is a test
	-----BEGIN PGP SIGNATURE-----

	iLUEARMKAB0WIQRGNptJFi1PMbRMjeSWXfdLXIML7QUCXyXYeAAKCRCWXfdLXIML
	7ewzAf4sMu2Jbn/Vci1L765UlOJ5v5vXmbDu/oorsmsJ07m/tXMsmr/eFx5dQ7vU
	vI8czxPjBWGXTHgA2ZE45luf+EiSAf4uruEkDzQufGusq8jE90QqTu/zu0bgoAQh
	PDIAVjJMND6ljBLSYEiQJ+zLT+zqQRaRHWL2JMWHIv1hADG0+6sh

	-----BEGIN PGP SIGNED MESSAGE-----
	Hash: SHA256

	This is a test
	-----BEGIN PGP SIGNATURE-----

	iQEzBAEBCAAdFiEEelxToHENRIRJinlLxkNItI9dyKAFAl8l1koACgkQxkNItI9d
	yKDZAQf/U0LYLEp7oCCAEzC8iMyiXvJcOjZcSYoN4+/MrWMZ5wAitsUq2BBOSD0P
	gZjLFP88rHF591Q3gU3G6RtXD0KrMQNK/a4Q8STCyri600ykZNIRN2R64s3hYo8L
	Q1o0gMyrtz2PRjF1qXYwcVno6ucmO/U0/2vz69MW4ekr1FAm1mh2NO7I8oDZw7Nc

	# coding=utf-8

	import tweepy

	# == OAuth Authentication ==
	#
	# This mode of authentication is the new preferred way
	# of authenticating with Twitter.

	# The consumer keys can be found on your application's Details

	module github.com/semanticallynull/slh

	go 1.16

	require github.com/montanaflynn/stats v0.6.6