Files for the MySensors network in my home

homeiot-gateway.cpp

#define MY_MQTT_USER ""
#define MY_MQTT_PASSWORD ""
#define MY_CONTROLLER_URL_ADDRESS ""
#define MY_PORT 1234

#define MY_DEBUG
#define MY_RADIO_NRF24
#define MY_GATEWAY_MQTT_CLIENT
#define MY_MQTT_PUBLISH_TOPIC_PREFIX "shome-out"
#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "shome-in"
#define MY_MQTT_CLIENT_ID "shome-gateway"

#define MY_SOFTSPI
#define MY_SOFT_SPI_SCK_PIN 14
#define MY_SOFT_SPI_MISO_PIN 16
#define MY_SOFT_SPI_MOSI_PIN 15
#define MY_RF24_CE_PIN 5
#define MY_RF24_CS_PIN 6

#include <Ethernet.h>
#include <MySensors.h>

void setup(){}

void presentation(){}

void loop(){}

homeiot-relay.cpp

#define MY_DEBUG

#define MY_RADIO_NRF24
#define MY_REPEATER_FEATURE

#include <MySensors.h>

#define RELAYPIN 7
#define RELAY_ON 1
#define RELAY_OFF 0

void before(){
  pinMode(RELAYPIN, OUTPUT);
}

void setup(){}
void loop(){}

void presentation(){
  sendSketchInfo("Relay", "1.0");
  present(RELAYPIN, S_BINARY);
}

void receive(const MyMessage &message){
  if (message.type == V_STATUS) {
    digitalWrite(RELAYPIN, message.getBool() ? RELAY_ON : RELAY_OFF);
    Serial.print("Incoming change for sensor:");
    Serial.print(message.sensor);
    Serial.print(", New status: ");
    Serial.println(message.getBool());
  }
}