-
-
Save SolveSoul/9be5d9599c8b4b59f7cfa4cd0ce79c9c to your computer and use it in GitHub Desktop.
| [CONST_PARAM] | |
| rtsp = 1 ; RTSPЭ�飬0���ر� 1������ |
| V380 Pro cameras have rtsp/onvif disabled by default. This can be unlocked by inserting an SD-card into the camera. | |
| A step-by-step guide can be found below: | |
| 1) Download the V380 Pro app from the App Store or Google Play | |
| 2) Register or continue without registering | |
| 3) Boot your camera and couple it to the application | |
| 4) Set a custom username and password for your camera | |
| 5) Download the 'ceshi.ini' file and put it on the root of a micro SD card (so not in a subfolder) | |
| 6) Power down the camera, insert the SD card and boot the camera | |
| 7) The camera will talk in chinese, wait for 5 minutes (probably shorter, but to be sure) | |
| 8) Power down the camera, remove the SD card, delete the file and power up the camera | |
| 9) Connect to your camera using the protocol rtsp://username:password@ipaddress:554/live/ch00_0 | |
| 10) DONE | |
| A great way to test is downloading/using VLC and opening a network stream. |
Bagaimana cara mengatur nama pengguna dan kata sandi pada kamera V380E, saya mencoba menggunakan telnet ke kamera tetapi saya tidak dapat menemukan nama pengguna/kata sandi?
Try using the v380 pro application on your smartphone. Usually there are settings to change the CCTV name and password.
does this work with solar 4g cameras?
Hey, does anyone know why the stream is accessible via RTSP without a password? I'm almost positive the camera has a password set, but you can just connect straight to rtsp://192.168.XX.YY:554/
Does anyone know why my CCTV settings in the V380 Pro application on Android for encoding settings H.264 or H.265 disappeared after activating ONVIF, even though before ONVIF appeared or was activated the encoding settings were already there but after activating it they disappeared. Because of that, I tried turning off the onvif then resetting the cctv but after connecting it again the onvif settings were active again, therefore I used ceshi.ini then just changed the number one to zero then reset then reconnected and the onvif settings were gone but the encoding settings were still not there.🤔?
How can I set a username and password on the V380E camera, I tried using telnet into camera but I can't find any user/password?