Display all network interfaces' IP address on an I2C OLED screen connected over GPIO

ip-on-oled.py

""" Display all network interfaces' IP address on an I2C OLED screen connected over GPIO (mainly for a raspberry pi) """

import socket
import time

from PIL import Image
from PIL import ImageDraw
from PIL import ImageFont

import Adafruit_GPIO.SPI as SPI
import Adafruit_SSD1306
import RPi.GPIO as GPIO
import netifaces



GPIO.setmode(GPIO.BCM)
RST = 24
disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST, i2c_address=0x3C)


def get_ip():
  s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
  s.connect(("8.8.8.8", 80))
  ip_addr = s.getsockname()[0]
  s.close()
  return ip_addr

def all_ips():
    ip = dict()
    for interface in netifaces.interfaces():
        try:
            out = netifaces.ifaddresses(interface)[netifaces.AF_INET]
        except KeyError:
            ip[interface] = "X_X"
        else:
            ip[interface] = out[0]["addr"]
    return ip


def main():
  # Setup display
  disp.begin()
  disp.clear()
  disp.display()

  # Create blank image for drawing.
  # Make sure to create image with mode '1' for 1-bit color.
  width = disp.width
  height = disp.height
  image = Image.new('1', (width, height))

  # Get drawing object to draw on image.
  draw = ImageDraw.Draw(image)
  font = ImageFont.load_default()

  # Draw a black filled box to clear the image.
  draw.rectangle((0,0,width,height), outline=0, fill=0)

  def draw_text(text, line=0):
    draw.text((5, 5 + line * 10), text, font=font, fill=1)

  # Check & redraw IP address
  old_ip = ""
  try:
    while 1:  # Try forever because this is an example
      ip_addr = ""
      for key, value in all_ips().items():
        ip_addr += f"{key}:{value}\n"
      if ip_addr != old_ip:
        draw.rectangle((0,0,width,height), outline=0, fill=0)
        old_ip = ip_addr
      if ip_addr:
        draw_text(ip_addr)
      else:
        draw_text("Searching for Wi-Fi...")

      disp.image(image)
      disp.display()
      time.sleep(.01)

  except KeyboardInterrupt:
    GPIO.cleanup()


if __name__ == '__main__':
  main()

Co-Authored by @RoguedBear

original credit/fork of: rfong/I2C_SSD1306_ipaddr.py

script modified to display IP addresses detected on all interfaces