synology docker-compose

docker-compose.yml

version: "3.2"
services:
# Radarr - https://hotio.dev/containers/radarr/
  radarr:
    container_name: radarr
    image: ghcr.io/hotio/radarr:latest
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 7878:7878
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/radarr:/config # Change "/volume1/docker/appdata/radarr" with the path your config will be.
      - /volume1/data:/data # Change "/volume1/data" with the path where your library + torrent/usenet downloads both are.
# Sonarr - https://hotio.dev/containers/sonarr/
  sonarr:
    container_name: sonarr
    image: ghcr.io/hotio/sonarr:nightly
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 8989:8989
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/sonarr:/config # Change "/volume1/docker/appdata/sonarr" with the path your config will be.
      - /volume1/data:/data # Change "/volume1/data" with the path where your library + torrent/usenet downloads both are.
# Bazarr - https://hotio.dev/containers/bazarr/
  bazarr:
    container_name: bazarr
    image: ghcr.io/hotio/bazarr:nightly
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 6767:6767
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/bazarr:/config # Change "/volume1/docker/appdata/bazarr" with the path your config will be.
      - /volume1/data/media:/data/media # Change "/volume1/data/media" with the path where your library are(sonarr+radarr).
# NZBGet - https://hotio.dev/containers/nzbget/
  nzbget:
    container_name: nzbget
    image: ghcr.io/hotio/nzbget:latest
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 6789:6789/tcp
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/nzbget:/config:rw # Change "/volume1/docker/appdata/nzbget" with the path your config will be.
      - /volume1/data/usenet:/data/usenet:rw # Change "/volume1/data/usenet" with the path your usenet data ends up in.
# qBittorrent - https://docs.linuxserver.io/images/docker-qbittorrent
  qbittorrent:
    container_name: qbittorrent
    image: ghcr.io/linuxserver/qbittorrent
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 6881:6881
      - 6881:6881/udp
      - 8080:8080
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
      - UMASK_SET=022
      - WEBUI_PORT=8080
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/qbittorrent:/config:rw # Change "/volume1/docker/appdata/qbittorrent" with the path your config will be.
      - /volume1/data/torrents:/data/torrents:rw # Change "/volume1/data/torrents" with the path your usenet data ends up in.
# Plex - https://hotio.dev/containers/plex/
  plex:
    container_name: plex
    image: ghcr.io/hotio/plex
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 32400:32400
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
      - UMASK=002
      - ARGS=
      - DEBUG=no
      - PLEX_CLAIM=
      - ADVERTISE_IP=
      - ALLOWED_NETWORKS=
      - PLEX_PASS=no
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/plex:/config:rw # Change "/volume1/docker/appdata/plex" with the path your config will be.
      - /volume1/data/media:/data/media:rw # Change "/volume1/data/media" with the path where your library are(sonarr+radarr).
      - /tmp:/transcode:rw
# Tautulli - https://hotio.dev/containers/tautulli/
  tautulli:
    container_name: tautulli
    image: ghcr.io/hotio/tautulli
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    ports:
      - 8181:8181
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
      - UMASK=002
      - ARGS=
      - DEBUG=no
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /volume1/docker/appdata/tautulli:/config:rw # Change "/volume1/docker/appdata/plex" with the path your config will be.
# Watchtower (automatic docker container updater) - https://github.com/containrrr/watchtower
  watchtower:
    container_name: watchtower
    image: containrrr/watchtower
    restart: unless-stopped
    logging:
      driver: json-file
    network_mode: bridge
    environment:
      - PUID=1026 # you must find out your PUID through SSH, type in terminal: id $user
      - PGID=100 # you must find out your PGID through SSH, type in terminal: id $user
      - TZ=Europe/Amsterdam # Change to your timezone
      - UMASK=022
      - WATCHTOWER_CLEANUP=true
      - WATCHTOWER_INCLUDE_STOPPED=false
      - WATCHTOWER_MONITOR_ONLY=false
      - WATCHTOWER_SCHEDULE=0 0 4 * * * # use cron to change update interval set at 4am.
      - WATCHTOWER_TIMEOUT=10s
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /var/run/docker.sock:/var/run/docker.sock