TRoetz · September 29, 2016 00:33
diff --git a/Polycom Provisioning b/Polycom Provisioning
 Firmwares:
 http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html
 http://downloads.polycom.com/voice/voip/uc_sw_releases_matrix.html

 Configuration:
 http://etel.wiki.oreilly.com/wiki/index.php/Dynamic_Phone_Provisioning_with_res_phoneprov_and_TFTP
 https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Configuration

 Reset Codes:
 1. Find and write down the MAC id of the phone you want to reset. You can typically find it on the back of the phone. If the label on the back of the phone with the MAC id is removed, you can find it by pressing Menu, Status, Network, Ethernet.
 2. Power down the phone.
 3. Power up the phone.
 4. You have about 15 seconds to complete this step:
 a-	For SoundPoint IP 320, 321, 330. 331, 335, 430, and 450 press and hold the 1, 3, 5, and 7 on the dial pad at the same time.
 b-	For SoundPoint IP 301, 501, 550, 600, 601, and 650 press and hold the 4, 6, 8, * on the dial pad at the same time.
 5.	After holding down the numbers for few second, you will be promoted to enter the admin password, enter the MAC id of the phone. No colons and the alpha characters must be entered as lower case letters.
 6.	The phone will reset itself.
diff --git a/Polycom Provisioning Guides b/Polycom Provisioning Guides
 http://etel.wiki.oreilly.com/wiki/index.php/Dynamic_Phone_Provisioning_with_res_phoneprov_and_TFTP
 https://wiki.freeswitch.org/wiki/Polycom_configuration#MAC-phone.cfg
 https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Reset+Codes
 https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Configuration
	Firmwares:
	http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html
	http://downloads.polycom.com/voice/voip/uc_sw_releases_matrix.html

	Configuration:
	http://etel.wiki.oreilly.com/wiki/index.php/Dynamic_Phone_Provisioning_with_res_phoneprov_and_TFTP
	https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Configuration

	Reset Codes:
	1. Find and write down the MAC id of the phone you want to reset. You can typically find it on the back of the phone. If the label on the back of the phone with the MAC id is removed, you can find it by pressing Menu, Status, Network, Ethernet.
	2. Power down the phone.
	3. Power up the phone.
	4. You have about 15 seconds to complete this step:
	a- For SoundPoint IP 320, 321, 330. 331, 335, 430, and 450 press and hold the 1, 3, 5, and 7 on the dial pad at the same time.
	b- For SoundPoint IP 301, 501, 550, 600, 601, and 650 press and hold the 4, 6, 8, * on the dial pad at the same time.
	5. After holding down the numbers for few second, you will be promoted to enter the admin password, enter the MAC id of the phone. No colons and the alpha characters must be entered as lower case letters.
	6. The phone will reset itself.
	http://etel.wiki.oreilly.com/wiki/index.php/Dynamic_Phone_Provisioning_with_res_phoneprov_and_TFTP
	https://wiki.freeswitch.org/wiki/Polycom_configuration#MAC-phone.cfg
	https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Reset+Codes
	https://freeswitch.org/confluence/display/FREESWITCH/Polycom+Configuration