-
-
Save Tahvok/8d522fa308041529b8248b2dfc2e6e4c to your computer and use it in GitHub Desktop.
OVS with OSA for Ocata
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #loopback | |
| auto lo | |
| iface lo inet loopback | |
| auto eth2 | |
| iface eth2 inet manual | |
| bond-master bond0 | |
| auto eth3 | |
| iface eth3 inet manual | |
| bond-master bond1 | |
| auto eth4 | |
| iface eth4 inet manual | |
| bond-master bond0 | |
| auto eth5 | |
| iface eth5 inet manual | |
| bond-master bond1 | |
| ### BOND | |
| auto bond0 | |
| iface bond0 inet manual | |
| bond-mode 802.3ad | |
| bond-slaves none | |
| bond-miimon 100 | |
| auto bond1 | |
| iface bond1 inet manual | |
| bond-mode 802.3ad | |
| bond-slaves none | |
| bond-miimon 100 | |
| ### VLAN | |
| auto bond0.2 | |
| iface bond0.2 inet manual | |
| up ip link set dev $IFACE up | |
| down ip link set dev $IFACE down | |
| up ip link set $IFACE promisc on | |
| down ip link set $IFACE promisc off | |
| auto bond0.5 | |
| iface bond0.5 inet manual | |
| vlan-raw-device bond0 | |
| auto bond0.3 | |
| iface bond0.403 inet manual | |
| vlan-raw-device bond0 | |
| auto bond1.7 | |
| iface bond1.307 inet manual | |
| vlan-raw-device bond1 | |
| ### BRIDGE | |
| auto br-mgmt | |
| iface br-mgmt inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond0.5 | |
| address 1.1.1.2 | |
| netmask 255.255.254.0 | |
| gateway 1.1.2.254 | |
| auto br-vxlan | |
| iface br-vxlan inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond0.3 | |
| address 2.2.2.3 | |
| netmask 255.255.254.0 | |
| auto br-vlan | |
| iface br-vlan inet manual | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond0 | |
| auto br-storage | |
| iface br-storage inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond1.7 | |
| address 3.3.3.4 | |
| netmask 255.255.254.0 | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #loopback | |
| auto lo | |
| iface lo inet loopback | |
| auto eth2 | |
| iface eth2 inet manual | |
| bond-master bond0 | |
| auto eth3 | |
| iface eth3 inet manual | |
| bond-master bond1 | |
| auto eth4 | |
| iface eth4 inet manual | |
| bond-master bond0 | |
| auto eth5 | |
| iface eth5 inet manual | |
| bond-master bond1 | |
| # BOND | |
| auto bond0 | |
| iface bond0 inet manual | |
| bond-mode 802.3ad | |
| bond-slaves none | |
| bond-miimon 100 | |
| auto bond1 | |
| iface bond1 inet manual | |
| bond-mode 802.3ad | |
| bond-slaves none | |
| bond-miimon 100 | |
| ### VLAN | |
| auto bond0.2 | |
| iface bond0.2 inet manual | |
| up ip link set dev $IFACE up | |
| down ip link set dev $IFACE down | |
| up ip link set $IFACE promisc on | |
| down ip link set $IFACE promisc off | |
| auto bond0.5 | |
| iface bond0.5 inet manual | |
| vlan-raw-device bond0 | |
| auto bond1.7 | |
| iface bond1.7 inet manual | |
| vlan-raw-device bond1 | |
| auto bond1.3 | |
| iface bond1.3 inet manual | |
| vlan-raw-device bond1 | |
| ### BRIDGE | |
| auto br-mgmt | |
| iface br-mgmt inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond0.5 | |
| address 1.1.1.1 | |
| netmask 255.255.254.0 | |
| gateway 1.1.2.254 | |
| auto br-vxlan | |
| iface br-vxlan inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond1.3 | |
| address 2.2.2.2 | |
| netmask 255.255.254.0 | |
| auto br-vlan | |
| iface br-vlan inet manual | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond0.2 | |
| auto br-storage | |
| iface br-storage inet static | |
| bridge_stp off | |
| bridge_waitport 0 | |
| bridge_fd 0 | |
| bridge_ports bond1.7 | |
| address 3.3.3.3 | |
| netmask 255.255.254.0 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Enter each neutron agent container, and run the following: | |
| ovs-vsctl add-br br-provider | |
| ovs-vsctl add-port br-provider eth12 | |
| On each compute node, run the following: | |
| ovs-vsctl add-br br-provider | |
| ovs-vsctl add-port br-provider bond0.2 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| --- | |
| cidr_networks: | |
| container: 1.1.1.0/23 | |
| tunnel: 2.2.2.0/23 | |
| storage: 3.3.3.0/23 | |
| used_ips: | |
| - 1.1.1.5 | |
| global_overrides: | |
| # The internal and external VIP should be different IPs, however they | |
| # do not need to be on separate networks. | |
| external_lb_vip_address: cloud.domain.com | |
| internal_lb_vip_address: 1.1.1.7 | |
| tunnel_bridge: "br-vxlan" | |
| management_bridge: "br-mgmt" | |
| provider_networks: | |
| - network: | |
| container_bridge: "br-mgmt" | |
| container_type: "veth" | |
| container_interface: "eth1" | |
| ip_from_q: "container" | |
| type: "raw" | |
| group_binds: | |
| - all_containers | |
| - hosts | |
| is_container_address: true | |
| is_ssh_address: true | |
| gateway: "1.1.2.254" | |
| - network: | |
| container_bridge: "br-vxlan" | |
| container_type: "veth" | |
| container_interface: "eth10" | |
| ip_from_q: "tunnel" | |
| type: "vxlan" | |
| range: "1:1000" | |
| net_name: "vxlan" | |
| group_binds: | |
| - neutron_openvswitch_agent | |
| - network: | |
| container_bridge: "br-vlan" | |
| container_type: "veth" | |
| container_interface: "eth12" | |
| host_bind_override: "br-vlan" | |
| type: "flat" | |
| net_name: "flat" | |
| group_binds: | |
| - neutron_openvswitch_agent | |
| # - network: | |
| # container_bridge: "br-vlan" | |
| # container_type: "veth" | |
| # container_interface: "eth11" | |
| # type: "vlan" | |
| # range: "1:1" | |
| # net_name: "vlan" | |
| # group_binds: | |
| # - neutron_openvswitch_agent | |
| - network: | |
| container_bridge: "br-storage" | |
| container_type: "veth" | |
| container_interface: "eth2" | |
| ip_from_q: "storage" | |
| type: "raw" | |
| group_binds: | |
| - glance_api | |
| - cinder_api | |
| - cinder_volume | |
| - nova_compute | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| openstack_host_specific_kernel_modules: | |
| - name: "openvswitch" | |
| pattern: "CONFIG_OPENVSWITCH=" | |
| group: "network_hosts" | |
| neutron_plugin_type: ml2.ovs | |
| neutron_ml2_drivers_type: "flat,vlan,vxlan" | |
| neutron_provider_networks: | |
| network_flat_networks: "provider" | |
| network_types: "vxlan" | |
| network_vxlan_ranges: "1:1000" | |
| network_vlan_ranges: "provider" | |
| network_mappings: "provider:br-provider" | |
| neutron_plugin_base: | |
| - router | |
| - metering | |
| - neutron_lbaas.services.loadbalancer.plugin.LoadBalancerPluginv2 | |
| - neutron_dynamic_routing.services.bgp.bgp_plugin.BgpPlugin | |
| - dns | |
| neutron_l2_population: True |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment