Created
March 27, 2022 22:32
-
-
Save Taubin/9abb7f2ecaa95d6707944939608cea9e to your computer and use it in GitHub Desktop.
Seagate errors
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Server:~# smartctl -a -v 1,raw48:54 /dev/sdc | |
| smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.30-Unraid] (local build) | |
| Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate BarraCuda 3.5 (SMR) | |
| Device Model: ST8000DM004-2CX188 | |
| Serial Number: WSC07DMT | |
| LU WWN Device Id: 5 000c50 0d598bb4b | |
| Firmware Version: 0001 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5425 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Mon Mar 28 11:32:01 2022 NZDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 992) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x30a5) SCT Status supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 081 064 006 Pre-fail Always - 0 | |
| 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 89 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 089 060 045 Pre-fail Always - 764339059 | |
| 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7984h+02m+02.989s | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 89 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 071 071 000 Old_age Always - 29 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 1 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 058 051 040 Old_age Always - 42 (Min/Max 36/42) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 261 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 394 | |
| 194 Temperature_Celsius 0x0022 042 049 000 Old_age Always - 42 (0 24 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 081 064 000 Old_age Always - 117470062 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7818h+42m+45.913s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 98706140113 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 28495206561 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 29 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 29 occurred at disk power-on lifetime: 7981 hours (332 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 00 ff ff ff 4f 00 01:35:28.373 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:35:28.373 READ FPDMA QUEUED | |
| 60 00 b8 ff ff ff 4f 00 01:35:28.305 READ FPDMA QUEUED | |
| 60 00 08 ff ff ff 4f 00 01:35:28.304 READ FPDMA QUEUED | |
| 60 00 18 ff ff ff 4f 00 01:35:28.303 READ FPDMA QUEUED | |
| Error 28 occurred at disk power-on lifetime: 7981 hours (332 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 00 ff ff ff 4f 00 01:30:03.787 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:30:03.728 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:30:03.723 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:30:03.718 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:30:03.713 READ FPDMA QUEUED | |
| Error 27 occurred at disk power-on lifetime: 7981 hours (332 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 08 ff ff ff 4f 00 01:22:45.367 READ FPDMA QUEUED | |
| 61 00 40 ff ff ff 4f 00 01:22:36.117 WRITE FPDMA QUEUED | |
| 61 00 40 ff ff ff 4f 00 01:22:36.110 WRITE FPDMA QUEUED | |
| 61 00 00 ff ff ff 4f 00 01:22:36.107 WRITE FPDMA QUEUED | |
| 61 00 c0 ff ff ff 4f 00 01:22:36.105 WRITE FPDMA QUEUED | |
| Error 26 occurred at disk power-on lifetime: 7981 hours (332 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 00 ff ff ff 4f 00 01:21:51.742 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:21:51.685 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:21:51.680 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:21:51.676 READ FPDMA QUEUED | |
| 60 00 00 ff ff ff 4f 00 01:21:51.671 READ FPDMA QUEUED | |
| Error 25 occurred at disk power-on lifetime: 7960 hours (331 days + 16 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 08 ff ff ff 4f 00 2d+04:07:25.044 READ FPDMA QUEUED | |
| 61 00 40 ff ff ff 4f 00 2d+04:07:24.120 WRITE FPDMA QUEUED | |
| 61 00 b0 ff ff ff 4f 00 2d+04:07:24.120 WRITE FPDMA QUEUED | |
| 61 00 10 ff ff ff 4f 00 2d+04:07:24.120 WRITE FPDMA QUEUED | |
| ea 00 00 00 00 00 a0 00 2d+04:07:23.124 FLUSH CACHE EXT | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed: read failure 90% 7979 367854096 | |
| # 2 Short offline Completed: read failure 90% 7979 367854096 | |
| # 3 Extended offline Completed: read failure 90% 7967 367854096 | |
| # 4 Extended offline Completed: read failure 90% 7957 367854096 | |
| # 5 Short offline Completed without error 00% 7912 - | |
| # 6 Extended offline Interrupted (host reset) 00% 1406 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment