Tech500 · March 15, 2026 17:16
diff --git a/weewx.conf b/weewx.conf

 william@weewx:/etc/weewx $ cat weewx.conf
 # WEEWX CONFIGURATION FILE
 #
 # Copyright (c) 2009-2021 Tom Keffer <tkeffer@gmail.com>
 # See the file LICENSE.txt for your rights.

 ##############################################################################

 # This section is for general configuration information.

 # Set to 1 for extra debug info, otherwise comment it out or set to zero
 debug = 1

 # Root directory of the weewx data file hierarchy for this station
 WEEWX_ROOT = /

 # Whether to log successful operations
 log_success = True

 # Whether to log unsuccessful operations
 log_failure = True

 # How long to wait before timing out a socket (FTP, HTTP) connection
 socket_timeout = 20

 # Do not modify this. It is used when installing and updating weewx.
 version = 5.1.0

 ##############################################################################

 #   This section is for information about the station.

 [Station]

    # Description of the station location
    location = "Nora Commons on the Monon"

    # Latitude in decimal degrees. Negative for southern hemisphere
    latitude = 39.907072
    # Longitude in decimal degrees. Negative for western hemisphere.
    longitude = -86.1446483

    # Altitude of the station, with unit it is in. This is downloaded from
    # from the station if the hardware supports it.
    altitude = 791, foot

    # Set to type of station hardware. There must be a corresponding stanza
    # in this file with a 'driver' parameter indicating the driver to be used.
    station_type = Interceptor

    # If you have a website, you may specify an URL
    #station_url = http://www.example.com

    # The start of the rain year (1=January; 10=October, etc.). This is
    # downloaded from the station if the hardware supports it.
    rain_year_start = 1

    # Start of week (0=Monday, 6=Sunday)
    week_start = 6

 ##############################################################################

 [Interceptor]
    # This section is for the network traffic interceptor driver.

    # The driver to use:
    driver = user.interceptor

    # Specify the hardware device to capture.  Options include:
    #   acurite-bridge - acurite internet bridge, smarthub, or access
    #   observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
    #   lw30x - oregon scientific LW301/LW302
    #   lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
    #   ecowitt-client - any hardware that uses the ecowitt protocol
    #   wu-client - any hardware that uses the weather underground protocol
    device_type = ecowitt-client
    port = 8000
    iface = wlan0

 ##############################################################################

 [WS23xx]
    # This section is for the La Crosse WS-2300 series of weather stations.

    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0

    # The station model, e.g., 'LaCrosse WS2317' or 'TFA Primus'
    model = LaCrosse WS23xx

    # The driver to use:
    driver = weewx.drivers.ws23xx

 ##############################################################################

 [Simulator]
    # This section is for the weewx weather station simulator

    # The time (in seconds) between LOOP packets.
    loop_interval = 2.5

    # The simulator mode can be either 'simulator' or 'generator'.
    # Real-time simulator. Sleep between each LOOP packet.
    mode = simulator
    # Generator.  Emit LOOP packets as fast as possible (useful for testing).
    #mode = generator

    # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
    # is to use the present time.
    #start = 2011-01-01T00:00

    # The driver to use:
    driver = weewx.drivers.simulator

 ##############################################################################

 #   This section is for uploading data to Internet sites

 [StdRESTful]

    [[StationRegistry]]
        # To register this weather station with weewx, set this to true
        register_this_station = False

    [[AWEKAS]]
        # This section is for configuring posts to AWEKAS.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a username and password.
        # To guard against parsing errors, put the password in quotes.
        enable = false
        username = replace_me
        password = replace_me

    [[CWOP]]
        # This section is for configuring posts to CWOP.

        # If you wish to do this, set the option 'enable' to true,
        # and specify the station ID (e.g., CW1234).
        enable = false
        station =  replace_me
        
    # If this is an APRS (radio amateur) station, uncomment
    # the following and replace with a passcode (e.g., 12345).
    #passcode = replace_me (APRS stations only)

    [[PWSweather]]
        # This section is for configuring posts to PWSweather.com.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.
        # To guard against parsing errors, put the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

    [[WOW]]
        # This section is for configuring posts to WOW.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.
        # To guard against parsing errors, put the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

    [[Wunderground]]
        # This section is for configuring posts to the Weather Underground.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a station (e.g., 'KORHOODR3') and password.
        # To guard against parsing errors, put the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

        # If you plan on using wunderfixer, set the following
        # to your API key:
        api_key = replace_me

        # Set the following to True to have weewx use the WU "Rapidfire"
        # protocol. Not all hardware can support it. See the User's Guide.
        rapidfire = False

 ##############################################################################

 #   This section specifies what reports, using which skins, to generate.

 [StdReport]

    # Where the skins reside, relative to WEEWX_ROOT
    SKIN_ROOT = /etc/weewx/skins

    # Where the generated reports should go, relative to WEEWX_ROOT
    HTML_ROOT = /var/www/html/weewx

    # The database binding indicates which data should be used in reports.
    data_binding = wx_binding

    # Whether to log a successful operation
    log_success = True

    # Whether to log an unsuccessful operation
    log_failure = True

    # Each of the following subsections defines a report that will be run.
    # See the customizing guide to change the units, plot types and line
    # colors, modify the fonts, display additional sensor data, and other
    # customizations. Many of those changes can be made here by overriding
    # parameters, or by modifying templates within the skin itself.

    [[SeasonsReport]]
        # The SeasonsReport uses the 'Seasons' skin, which contains the
        # images, templates and plots for the report.
        skin = Seasons
        enable = true

    [[SmartphoneReport]]
        # The SmartphoneReport uses the 'Smartphone' skin, and the images and
        # files are placed in a dedicated subdirectory.
        skin = Smartphone
        enable = false
        HTML_ROOT = /var/www/html/weewx/smartphone

    [[MobileReport]]
        # The MobileReport uses the 'Mobile' skin, and the images and files
        # are placed in a dedicated subdirectory.
        skin = Mobile
        enable = false
        HTML_ROOT = /var/www/html/weewx/mobile

    [[StandardReport]]
        # This is the old "Standard" skin. By default, it is not enabled.
        skin = Standard
        enable = false

    [[FTP]]
        # FTP'ing the results to a webserver is treated as just another report,
        # albeit one with an unusual report generator!
        skin = Ftp

        # If you wish to use FTP, set "enable" to "true", then
        # fill out the next four lines.
        # Use quotes around passwords to guard against parsing errors.
        enable = false
        user = replace_me
        password = replace_me
        server = replace_me    # The ftp server name, e.g, www.myserver.org
        path = replace_me    # The destination directory, e.g., /weather

        # Set to True for an FTP over TLS (FTPS) connection. Not all servers
        # support this.
        secure_ftp = False

        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = /var/www/html/weewx

        # Most FTP servers use port 21
        port = 21

        # Set to 1 to use passive mode, zero for active mode
        passive = 1

    [[RSYNC]]
        # rsync'ing to a webserver is treated as just another report
        skin = Rsync

        # If you wish to use rsync, you must configure passwordless ssh using
        # public/private key authentication from the user account that weewx
        # runs to the user account on the remote machine where the files
        # will be copied.
        #
        # If you wish to use rsync, set "enable" to "true", then
        # fill out server, user, and path.
        # The server should appear in your .ssh/config file.
        # The user is the username used in the identity file.
        # The path is the destination directory, such as /var/www/html/weather.
        # Be sure that the user has write permissions on the destination!
        enable = false
        server = replace_me
        user = replace_me
        path = replace_me

        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = /var/www/html/weewx

        # Rsync can be configured to remove files from the remote server if
        # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
        # make a mistake in the remote path, you could could unintentionally
        # cause unrelated files to be deleted. Set to 1 to enable remote file
        # deletion, zero to allow files to accumulate remotely.
        delete = 0

    ####

    # Various options for customizing your reports.

    [[Defaults]]
        unit_system = us

        [[[Units]]]

            # The following section sets what unit to use for each unit group.
            # NB: The unit is always in the singular. I.e., 'mile_per_hour',
            # NOT 'miles_per_hour'
            [[[[Groups]]]]

                group_altitude = foot    # Options are 'foot' or 'meter'
                group_degree_day = degree_F_day    # Options are 'degree_F_day' or 'degree_C_day'
                group_distance = mile    # Options are 'mile' or 'km'
                group_pressure = inHg    # Options are 'inHg', 'mmHg', 'mbar', 'hPa', or 'kPa'
                group_rain = inch    # Options are 'inch', 'cm', or 'mm'
                group_rainrate = inch_per_hour    # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
                group_speed = mile_per_hour    # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
                group_speed2 = mile_per_hour2    # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
                group_temperature = degree_F    # Options are 'degree_F' or 'degree_C'

            # The following section sets the formatting for each type of unit.
            [[[[StringFormats]]]]

                centibar = %.0f
                cm = %.2f
                cm_per_hour = %.2f
                degree_C = %.1f
                degree_F = %.1f
                degree_compass = %.0f
                foot = %.0f
                hPa = %.1f
                hour = %.1f
                inHg = %.3f
                inch = %.2f
                inch_per_hour = %.2f
                km = %.1f
                km_per_hour = %.0f
                km_per_hour2 = %.1f
                knot = %.0f
                knot2 = %.1f
                kPa = %.2f
                mbar = %.1f
                meter = %.0f
                meter_per_second = %.1f
                meter_per_second2 = %.1f
                mile = %.1f
                mile_per_hour = %.0f
                mile_per_hour2 = %.1f
                mm = %.1f
                mmHg = %.1f
                mm_per_hour = %.1f
                percent = %.0f
                second = %.0f
                uv_index = %.1f
                volt = %.1f
                watt_per_meter_squared = %.0f
                NONE = "   N/A"

            # The following section overrides the label used for each type of unit
            [[[[Labels]]]]

                meter = " meter", " meters"    # You may prefer "metre".
                day = " day", " days"
                hour = " hour", " hours"
                minute = " minute", " minutes"
                second = " second", " seconds"
                NONE = ""

            # The following section sets the format for each time scale.
            # The values below will work in every locale, but they may not look
            # particularly attractive.
            [[[[TimeFormats]]]]

                hour = %H:%M
                day = %X
                week = %X (%A)
                month = %x %X
                year = %x %X
                rainyear = %x %X
                current = %x %X
                ephem_day = %X
                ephem_year = %x %X

            [[[[Ordinates]]]]

                # Ordinal directions. The last one is for no wind direction
                directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

            # The following section sets the base temperatures used for the
            #  calculation of heating, cooling, and growing degree-days.
            [[[[DegreeDays]]]]

                # Base temperature for heating days, with unit:
                heating_base = 65, degree_F
                # Base temperature for cooling days, with unit:
                cooling_base = 65, degree_F
                # Base temperature for growing days, with unit:
                growing_base = 50, degree_F

            # A trend takes a difference across a time period. The following
            # section sets the time period, and how big an error is allowed to
            # still be counted as the start or end of a period.
            [[[[Trend]]]]

                time_delta = 10800    # 3 hours
                time_grace = 300    # 5 minutes

        # The labels to be used for each observation type
        [[[Labels]]]

            # Set to hemisphere abbreviations suitable for your location:
            hemispheres = N, S, E, W

            # Formats to be used for latitude whole degrees, longitude whole
            # degrees, and minutes:
            latlon_formats = %02d, %03d, %05.2f

            # Generic labels, keyed by an observation type.
            [[[[Generic]]]]
                barometer = Barometer
                dewpoint = Dew Point
                ET = ET
                heatindex = Heat Index
                inHumidity = Inside Humidity
                inTemp = Inside Temperature
                outHumidity = Humidity
                outTemp = Outside Temperature
                radiation = Radiation
                rain = Rain
                rainRate = Rain Rate
                UV = UV Index
                windDir = Wind Direction
                windGust = Gust Speed
                windGustDir = Gust Direction
                windSpeed = Wind Speed
                windchill = Wind Chill
                windgustvec = Gust Vector
                windvec = Wind Vector
                extraTemp1 = Temperature1
                extraTemp2 = Temperature2
                extraTemp3 = Temperature3

                # Sensor status indicators

                rxCheckPercent = Signal Quality
                txBatteryStatus = Transmitter Battery
                windBatteryStatus = Wind Battery
                rainBatteryStatus = Rain Battery
                outTempBatteryStatus = Outside Temperature Battery
                inTempBatteryStatus = Inside Temperature Battery
                consBatteryVoltage = Console Battery
                heatingVoltage = Heating Battery
                supplyVoltage = Supply Voltage
                referenceVoltage = Reference Voltage

        [[[Almanac]]]

            # The labels to be used for the phases of the moon:
            moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent

 ##############################################################################

 #   This service acts as a filter, converting the unit system coming from
 #   the hardware to a unit system in the database.

 [StdConvert]

    # The target_unit affects only the unit system in the database. Once
    # chosen it cannot be changed without converting the entire database.
    # Modification of target_unit after starting weewx will result in
    # corrupt data - the database will contain a mix of US and METRIC data.
    #
    # The value of target_unit does not affect the unit system for
    # reporting - reports can display US, Metric, or any combination of units.
    #
    # In most cases, target_unit should be left as the default: US
    #
    # In particular, those migrating from a standard wview installation
    # should use US since that is what the wview database contains.

    # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
    target_unit = US    # Options are 'US', 'METRICWX', or 'METRIC'

 ##############################################################################

 #   This section can adjust data using calibration expressions.

 [StdCalibrate]

    [[Corrections]]
        # For each type, an arbitrary calibration expression can be given.
        # It should be in the units defined in the StdConvert section.
        # Example:
        foo = foo + 0.2

 ##############################################################################

 #   This section is for quality control checks. If units are not specified,
 #   values must be in the units defined in the StdConvert section.

 [StdQC]

    [[MinMax]]
        barometer = 26, 32.5, inHg
        pressure = 24, 34.5, inHg
        outTemp = -40, 120, degree_F
        inTemp = 10, 120, degree_F
        outHumidity = 0, 100
        inHumidity = 0, 100
        windSpeed = 0, 120, mile_per_hour
        rain = 0, 10, inch

 ##############################################################################

 #   This section controls the origin of derived values.

 [StdWXCalculate]

    [[Calculations]]
        # How to calculate derived quantities.  Possible values are:
        #  hardware        - use the value provided by hardware
        #  software        - use the value calculated by weewx
        #  prefer_hardware - use value provide by hardware if available,
        #                      otherwise use value calculated by weewx

        pressure = prefer_hardware
        altimeter = prefer_hardware
        appTemp = prefer_hardware
        barometer = prefer_hardware
        cloudbase = prefer_hardware
        dewpoint = prefer_hardware
        ET = prefer_hardware
        heatindex = prefer_hardware
        humidex = prefer_hardware
        inDewpoint = prefer_hardware
        maxSolarRad = prefer_hardware
        rainRate = prefer_hardware
        windchill = prefer_hardware
        windrun = prefer_hardware

 ##############################################################################

 #   For hardware that supports it, this section controls how often the
 #   onboard clock gets updated.

 [StdTimeSynch]

    # How often to check the weather station clock for drift (in seconds)
    clock_check = 14400

    # How much it can drift before we will correct it (in seconds)
    max_drift = 5

 ##############################################################################

 #   This section is for configuring the archive service.

 [StdArchive]

    # If the station hardware supports data logging then the archive interval
    # will be downloaded from the station. Otherwise, specify it (in seconds).
    archive_interval = 300

    # If possible, new archive records are downloaded from the station
    # hardware. If the hardware does not support this, then new archive
    # records will be generated in software.
    # Set the following to "software" to force software record generation.
    record_generation = software

    # Whether to include LOOP data in hi/low statistics
    loop_hilo = True

    # The data binding used to save archive records
    data_binding = wx_binding

    # Whether to log successful archive operations
    log_success = True

    # Whether to log unsuccessful archive operations
    log_failure = True

 ##############################################################################

 #   This section binds a data store to a database.

 [DataBindings]

    [[wx_binding]]
        # The database must match one of the sections in [Databases].
        # This is likely to be the only option you would want to change.
        database = archive_sqlite
        # The name of the table within the database
        table_name = archive
        # The manager handles aggregation of data for historical summaries
        manager = weewx.manager.DaySummaryManager
        # The schema defines the structure of the database.
        # It is *only* used when the database is created.
        schema = schemas.wview_extended.schema

 ##############################################################################

 #   This section defines various databases.

 [Databases]

    # A SQLite database is simply a single file
    [[archive_sqlite]]
        database_name = weewx.sdb
        database_type = SQLite

    # MySQL
    [[archive_mysql]]
        database_name = weewx
        database_type = MySQL

 ##############################################################################

 #   This section defines defaults for the different types of databases.

 [DatabaseTypes]

    # Defaults for SQLite databases
    [[SQLite]]
        driver = weedb.sqlite
        # Directory in which the database files are located
        SQLITE_ROOT = /var/lib/weewx

    # Defaults for MySQL databases
    [[MySQL]]
        driver = weedb.mysql
        # The host where the database is located
        host = localhost
        # The user name for logging in to the host
        user = weewx
        # The password for the user name (quotes guard against parsing errors)
        password = weewx

 ##############################################################################

 #   This section configures the internal weewx engine.

 [Engine]
    # The following section specifies which services should be run and in what order.
    [[Services]]
        prep_services = weewx.engine.StdTimeSynch
        data_services = ,
        process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
        xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
        archive_services = weewx.engine.StdArchive
        restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
        report_services = weewx.engine.StdPrint, weewx.engine.StdReport

	william@weewx:/etc/weewx $ cat weewx.conf
	# WEEWX CONFIGURATION FILE
	#
	# Copyright (c) 2009-2021 Tom Keffer <tkeffer@gmail.com>
	# See the file LICENSE.txt for your rights.

	##############################################################################

	# This section is for general configuration information.

	# Set to 1 for extra debug info, otherwise comment it out or set to zero
	debug = 1

	# Root directory of the weewx data file hierarchy for this station
	WEEWX_ROOT = /

	# Whether to log successful operations
	log_success = True

	# Whether to log unsuccessful operations
	log_failure = True

	# How long to wait before timing out a socket (FTP, HTTP) connection
	socket_timeout = 20

	# Do not modify this. It is used when installing and updating weewx.
	version = 5.1.0

	##############################################################################

	# This section is for information about the station.

	[Station]

	# Description of the station location
	location = "Nora Commons on the Monon"

	# Latitude in decimal degrees. Negative for southern hemisphere
	latitude = 39.907072
	# Longitude in decimal degrees. Negative for western hemisphere.
	longitude = -86.1446483

	# Altitude of the station, with unit it is in. This is downloaded from
	# from the station if the hardware supports it.
	altitude = 791, foot

	# Set to type of station hardware. There must be a corresponding stanza
	# in this file with a 'driver' parameter indicating the driver to be used.
	station_type = Interceptor

	# If you have a website, you may specify an URL
	#station_url = http://www.example.com

	# The start of the rain year (1=January; 10=October, etc.). This is
	# downloaded from the station if the hardware supports it.
	rain_year_start = 1

	# Start of week (0=Monday, 6=Sunday)
	week_start = 6

	##############################################################################

	[Interceptor]
	# This section is for the network traffic interceptor driver.

	# The driver to use:
	driver = user.interceptor

	# Specify the hardware device to capture. Options include:
	# acurite-bridge - acurite internet bridge, smarthub, or access
	# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
	# lw30x - oregon scientific LW301/LW302
	# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
	# ecowitt-client - any hardware that uses the ecowitt protocol
	# wu-client - any hardware that uses the weather underground protocol
	device_type = ecowitt-client
	port = 8000
	iface = wlan0

	##############################################################################

	[WS23xx]
	# This section is for the La Crosse WS-2300 series of weather stations.

	# Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
	port = /dev/ttyUSB0

	# The station model, e.g., 'LaCrosse WS2317' or 'TFA Primus'
	model = LaCrosse WS23xx

	# The driver to use:
	driver = weewx.drivers.ws23xx

	##############################################################################

	[Simulator]
	# This section is for the weewx weather station simulator

	# The time (in seconds) between LOOP packets.
	loop_interval = 2.5

	# The simulator mode can be either 'simulator' or 'generator'.
	# Real-time simulator. Sleep between each LOOP packet.
	mode = simulator
	# Generator. Emit LOOP packets as fast as possible (useful for testing).
	#mode = generator

	# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
	# is to use the present time.
	#start = 2011-01-01T00:00

	# The driver to use:
	driver = weewx.drivers.simulator

	##############################################################################

	# This section is for uploading data to Internet sites

	[StdRESTful]

	[[StationRegistry]]
	# To register this weather station with weewx, set this to true
	register_this_station = False

	[[AWEKAS]]
	# This section is for configuring posts to AWEKAS.

	# If you wish to do this, set the option 'enable' to true,
	# and specify a username and password.
	# To guard against parsing errors, put the password in quotes.
	enable = false
	username = replace_me
	password = replace_me

	[[CWOP]]
	# This section is for configuring posts to CWOP.

	# If you wish to do this, set the option 'enable' to true,
	# and specify the station ID (e.g., CW1234).
	enable = false
	station = replace_me

	# If this is an APRS (radio amateur) station, uncomment
	# the following and replace with a passcode (e.g., 12345).
	#passcode = replace_me (APRS stations only)

	[[PWSweather]]
	# This section is for configuring posts to PWSweather.com.

	# If you wish to do this, set the option 'enable' to true,
	# and specify a station and password.
	# To guard against parsing errors, put the password in quotes.
	enable = false
	station = replace_me
	password = replace_me

	[[WOW]]
	# This section is for configuring posts to WOW.

	# If you wish to do this, set the option 'enable' to true,
	# and specify a station and password.
	# To guard against parsing errors, put the password in quotes.
	enable = false
	station = replace_me
	password = replace_me

	[[Wunderground]]
	# This section is for configuring posts to the Weather Underground.

	# If you wish to do this, set the option 'enable' to true,
	# and specify a station (e.g., 'KORHOODR3') and password.
	# To guard against parsing errors, put the password in quotes.
	enable = false
	station = replace_me
	password = replace_me

	# If you plan on using wunderfixer, set the following
	# to your API key:
	api_key = replace_me

	# Set the following to True to have weewx use the WU "Rapidfire"
	# protocol. Not all hardware can support it. See the User's Guide.
	rapidfire = False

	##############################################################################

	# This section specifies what reports, using which skins, to generate.

	[StdReport]

	# Where the skins reside, relative to WEEWX_ROOT
	SKIN_ROOT = /etc/weewx/skins

	# Where the generated reports should go, relative to WEEWX_ROOT
	HTML_ROOT = /var/www/html/weewx

	# The database binding indicates which data should be used in reports.
	data_binding = wx_binding

	# Whether to log a successful operation
	log_success = True

	# Whether to log an unsuccessful operation
	log_failure = True

	# Each of the following subsections defines a report that will be run.
	# See the customizing guide to change the units, plot types and line
	# colors, modify the fonts, display additional sensor data, and other
	# customizations. Many of those changes can be made here by overriding
	# parameters, or by modifying templates within the skin itself.

	[[SeasonsReport]]
	# The SeasonsReport uses the 'Seasons' skin, which contains the
	# images, templates and plots for the report.
	skin = Seasons
	enable = true

	[[SmartphoneReport]]
	# The SmartphoneReport uses the 'Smartphone' skin, and the images and
	# files are placed in a dedicated subdirectory.
	skin = Smartphone
	enable = false
	HTML_ROOT = /var/www/html/weewx/smartphone

	[[MobileReport]]
	# The MobileReport uses the 'Mobile' skin, and the images and files
	# are placed in a dedicated subdirectory.
	skin = Mobile
	enable = false
	HTML_ROOT = /var/www/html/weewx/mobile

	[[StandardReport]]
	# This is the old "Standard" skin. By default, it is not enabled.
	skin = Standard
	enable = false

	[[FTP]]
	# FTP'ing the results to a webserver is treated as just another report,
	# albeit one with an unusual report generator!
	skin = Ftp

	# If you wish to use FTP, set "enable" to "true", then
	# fill out the next four lines.
	# Use quotes around passwords to guard against parsing errors.
	enable = false
	user = replace_me
	password = replace_me
	server = replace_me # The ftp server name, e.g, www.myserver.org
	path = replace_me # The destination directory, e.g., /weather

	# Set to True for an FTP over TLS (FTPS) connection. Not all servers
	# support this.
	secure_ftp = False

	# To upload files from something other than what HTML_ROOT is set
	# to above, specify a different HTML_ROOT here.
	#HTML_ROOT = /var/www/html/weewx

	# Most FTP servers use port 21
	port = 21

	# Set to 1 to use passive mode, zero for active mode
	passive = 1

	[[RSYNC]]
	# rsync'ing to a webserver is treated as just another report
	skin = Rsync

	# If you wish to use rsync, you must configure passwordless ssh using
	# public/private key authentication from the user account that weewx
	# runs to the user account on the remote machine where the files
	# will be copied.
	#
	# If you wish to use rsync, set "enable" to "true", then
	# fill out server, user, and path.
	# The server should appear in your .ssh/config file.
	# The user is the username used in the identity file.
	# The path is the destination directory, such as /var/www/html/weather.
	# Be sure that the user has write permissions on the destination!
	enable = false
	server = replace_me
	user = replace_me
	path = replace_me

	# To upload files from something other than what HTML_ROOT is set
	# to above, specify a different HTML_ROOT here.
	#HTML_ROOT = /var/www/html/weewx

	# Rsync can be configured to remove files from the remote server if
	# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
	# make a mistake in the remote path, you could could unintentionally
	# cause unrelated files to be deleted. Set to 1 to enable remote file
	# deletion, zero to allow files to accumulate remotely.
	delete = 0

	####

	# Various options for customizing your reports.

	[[Defaults]]
	unit_system = us

	[[[Units]]]

	# The following section sets what unit to use for each unit group.
	# NB: The unit is always in the singular. I.e., 'mile_per_hour',
	# NOT 'miles_per_hour'
	[[[[Groups]]]]

	group_altitude = foot # Options are 'foot' or 'meter'
	group_degree_day = degree_F_day # Options are 'degree_F_day' or 'degree_C_day'
	group_distance = mile # Options are 'mile' or 'km'
	group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar', 'hPa', or 'kPa'
	group_rain = inch # Options are 'inch', 'cm', or 'mm'
	group_rainrate = inch_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
	group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
	group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
	group_temperature = degree_F # Options are 'degree_F' or 'degree_C'

	# The following section sets the formatting for each type of unit.
	[[[[StringFormats]]]]

	centibar = %.0f
	cm = %.2f
	cm_per_hour = %.2f
	degree_C = %.1f
	degree_F = %.1f
	degree_compass = %.0f
	foot = %.0f
	hPa = %.1f
	hour = %.1f
	inHg = %.3f
	inch = %.2f
	inch_per_hour = %.2f
	km = %.1f
	km_per_hour = %.0f
	km_per_hour2 = %.1f
	knot = %.0f
	knot2 = %.1f
	kPa = %.2f
	mbar = %.1f
	meter = %.0f
	meter_per_second = %.1f
	meter_per_second2 = %.1f
	mile = %.1f
	mile_per_hour = %.0f
	mile_per_hour2 = %.1f
	mm = %.1f
	mmHg = %.1f
	mm_per_hour = %.1f
	percent = %.0f
	second = %.0f
	uv_index = %.1f
	volt = %.1f
	watt_per_meter_squared = %.0f
	NONE = " N/A"

	# The following section overrides the label used for each type of unit
	[[[[Labels]]]]

	meter = " meter", " meters" # You may prefer "metre".
	day = " day", " days"
	hour = " hour", " hours"
	minute = " minute", " minutes"
	second = " second", " seconds"
	NONE = ""

	# The following section sets the format for each time scale.
	# The values below will work in every locale, but they may not look
	# particularly attractive.
	[[[[TimeFormats]]]]

	hour = %H:%M
	day = %X
	week = %X (%A)
	month = %x %X
	year = %x %X
	rainyear = %x %X
	current = %x %X
	ephem_day = %X
	ephem_year = %x %X

	[[[[Ordinates]]]]

	# Ordinal directions. The last one is for no wind direction
	directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

	# The following section sets the base temperatures used for the
	# calculation of heating, cooling, and growing degree-days.
	[[[[DegreeDays]]]]

	# Base temperature for heating days, with unit:
	heating_base = 65, degree_F
	# Base temperature for cooling days, with unit:
	cooling_base = 65, degree_F
	# Base temperature for growing days, with unit:
	growing_base = 50, degree_F

	# A trend takes a difference across a time period. The following
	# section sets the time period, and how big an error is allowed to
	# still be counted as the start or end of a period.
	[[[[Trend]]]]

	time_delta = 10800 # 3 hours
	time_grace = 300 # 5 minutes

	# The labels to be used for each observation type
	[[[Labels]]]

	# Set to hemisphere abbreviations suitable for your location:
	hemispheres = N, S, E, W

	# Formats to be used for latitude whole degrees, longitude whole
	# degrees, and minutes:
	latlon_formats = %02d, %03d, %05.2f

	# Generic labels, keyed by an observation type.
	[[[[Generic]]]]
	barometer = Barometer
	dewpoint = Dew Point
	ET = ET
	heatindex = Heat Index
	inHumidity = Inside Humidity
	inTemp = Inside Temperature
	outHumidity = Humidity
	outTemp = Outside Temperature
	radiation = Radiation
	rain = Rain
	rainRate = Rain Rate
	UV = UV Index
	windDir = Wind Direction
	windGust = Gust Speed
	windGustDir = Gust Direction
	windSpeed = Wind Speed
	windchill = Wind Chill
	windgustvec = Gust Vector
	windvec = Wind Vector
	extraTemp1 = Temperature1
	extraTemp2 = Temperature2
	extraTemp3 = Temperature3

	# Sensor status indicators

	rxCheckPercent = Signal Quality
	txBatteryStatus = Transmitter Battery
	windBatteryStatus = Wind Battery
	rainBatteryStatus = Rain Battery
	outTempBatteryStatus = Outside Temperature Battery
	inTempBatteryStatus = Inside Temperature Battery
	consBatteryVoltage = Console Battery
	heatingVoltage = Heating Battery
	supplyVoltage = Supply Voltage
	referenceVoltage = Reference Voltage

	[[[Almanac]]]

	# The labels to be used for the phases of the moon:
	moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent

	##############################################################################

	# This service acts as a filter, converting the unit system coming from
	# the hardware to a unit system in the database.

	[StdConvert]

	# The target_unit affects only the unit system in the database. Once
	# chosen it cannot be changed without converting the entire database.
	# Modification of target_unit after starting weewx will result in
	# corrupt data - the database will contain a mix of US and METRIC data.
	#
	# The value of target_unit does not affect the unit system for
	# reporting - reports can display US, Metric, or any combination of units.
	#
	# In most cases, target_unit should be left as the default: US
	#
	# In particular, those migrating from a standard wview installation
	# should use US since that is what the wview database contains.

	# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
	target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'

	##############################################################################

	# This section can adjust data using calibration expressions.

	[StdCalibrate]

	[[Corrections]]
	# For each type, an arbitrary calibration expression can be given.
	# It should be in the units defined in the StdConvert section.
	# Example:
	foo = foo + 0.2

	##############################################################################

	# This section is for quality control checks. If units are not specified,
	# values must be in the units defined in the StdConvert section.

	[StdQC]

	[[MinMax]]
	barometer = 26, 32.5, inHg
	pressure = 24, 34.5, inHg
	outTemp = -40, 120, degree_F
	inTemp = 10, 120, degree_F
	outHumidity = 0, 100
	inHumidity = 0, 100
	windSpeed = 0, 120, mile_per_hour
	rain = 0, 10, inch

	##############################################################################

	# This section controls the origin of derived values.

	[StdWXCalculate]

	[[Calculations]]
	# How to calculate derived quantities. Possible values are:
	# hardware - use the value provided by hardware
	# software - use the value calculated by weewx
	# prefer_hardware - use value provide by hardware if available,
	# otherwise use value calculated by weewx

	pressure = prefer_hardware
	altimeter = prefer_hardware
	appTemp = prefer_hardware
	barometer = prefer_hardware
	cloudbase = prefer_hardware
	dewpoint = prefer_hardware
	ET = prefer_hardware
	heatindex = prefer_hardware
	humidex = prefer_hardware
	inDewpoint = prefer_hardware
	maxSolarRad = prefer_hardware
	rainRate = prefer_hardware
	windchill = prefer_hardware
	windrun = prefer_hardware

	##############################################################################

	# For hardware that supports it, this section controls how often the
	# onboard clock gets updated.

	[StdTimeSynch]

	# How often to check the weather station clock for drift (in seconds)
	clock_check = 14400

	# How much it can drift before we will correct it (in seconds)
	max_drift = 5

	##############################################################################

	# This section is for configuring the archive service.

	[StdArchive]

	# If the station hardware supports data logging then the archive interval
	# will be downloaded from the station. Otherwise, specify it (in seconds).
	archive_interval = 300

	# If possible, new archive records are downloaded from the station
	# hardware. If the hardware does not support this, then new archive
	# records will be generated in software.
	# Set the following to "software" to force software record generation.
	record_generation = software

	# Whether to include LOOP data in hi/low statistics
	loop_hilo = True

	# The data binding used to save archive records
	data_binding = wx_binding

	# Whether to log successful archive operations
	log_success = True

	# Whether to log unsuccessful archive operations
	log_failure = True

	##############################################################################

	# This section binds a data store to a database.

	[DataBindings]

	[[wx_binding]]
	# The database must match one of the sections in [Databases].
	# This is likely to be the only option you would want to change.
	database = archive_sqlite
	# The name of the table within the database
	table_name = archive
	# The manager handles aggregation of data for historical summaries
	manager = weewx.manager.DaySummaryManager
	# The schema defines the structure of the database.
	# It is only used when the database is created.
	schema = schemas.wview_extended.schema

	##############################################################################

	# This section defines various databases.

	[Databases]

	# A SQLite database is simply a single file
	[[archive_sqlite]]
	database_name = weewx.sdb
	database_type = SQLite

	# MySQL
	[[archive_mysql]]
	database_name = weewx
	database_type = MySQL

	##############################################################################

	# This section defines defaults for the different types of databases.

	[DatabaseTypes]

	# Defaults for SQLite databases
	[[SQLite]]
	driver = weedb.sqlite
	# Directory in which the database files are located
	SQLITE_ROOT = /var/lib/weewx

	# Defaults for MySQL databases
	[[MySQL]]
	driver = weedb.mysql
	# The host where the database is located
	host = localhost
	# The user name for logging in to the host
	user = weewx
	# The password for the user name (quotes guard against parsing errors)
	password = weewx

	##############################################################################

	# This section configures the internal weewx engine.

	[Engine]
	# The following section specifies which services should be run and in what order.
	[[Services]]
	prep_services = weewx.engine.StdTimeSynch
	data_services = ,
	process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
	xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
	archive_services = weewx.engine.StdArchive
	restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
	report_services = weewx.engine.StdPrint, weewx.engine.StdReport
No results found