Last active
February 19, 2024 19:56
-
-
Save Tekunalogy/ba4c1d0f6198cab9dae0da87fb242544 to your computer and use it in GitHub Desktop.
dmesg output after starting a camera
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 6.1.77-v8-16k+ | |
| Setting pipeline to PAUSED ... | |
| Pipeline is live and does not need PREROLL ... | |
| Pipeline is PREROLLED ... | |
| Setting pipeline to PLAYING ... | |
| New clock: GstSystemClock | |
| Execution ended after 0:00:00.066955306 | |
| Setting pipeline to NULL ... | |
| 0:00:00.022424456 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:132:gst_v4l2_probe_and_register: Probing devices | |
| 0:00:00.390315779 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:165:gst_v4l2_probe_and_register: Probing 'rpivid' located at '/dev/video46' | |
| 0:00:00.390336519 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:74:gst_v4l2_probe_template_caps: Getting /dev/video46 format enumerations | |
| 0:00:00.390470464 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:74:gst_v4l2_probe_template_caps: Getting /dev/video46 format enumerations | |
| 0:00:00.390531112 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x35363253 S265 | |
| 0:00:00.390594167 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:74:gst_v4l2_probe_template_caps: Getting /dev/video46 format enumerations | |
| 0:00:00.390650945 1205 0x555626375d50 DEBUG v4l2 gstv4l2.c:74:gst_v4l2_probe_template_caps: Getting /dev/video46 format enumerations | |
| 0:00:00.390699963 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x3231434e NC12 | |
| 0:00:00.390757704 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x3033434e NC30 | |
| 0:00:00.392398258 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x31424752 RGB1 | |
| 0:00:00.392474406 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x35315241 AR15 | |
| 0:00:00.392546739 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0xb5315241 AR1. | |
| 0:00:00.392626313 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x52424752 RGBR | |
| 0:00:00.392677276 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x48524742 BGRH | |
| 0:00:00.392766313 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x34343452 R444 | |
| 0:00:00.392848183 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x20343059 Y04 | |
| 0:00:00.392904387 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x20363059 Y06 | |
| 0:00:00.392948405 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x20303159 Y10 | |
| 0:00:00.392992535 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x20323159 Y12 | |
| 0:00:00.393057979 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x42303159 Y10B | |
| 0:00:00.393115109 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x384c4150 PAL8 | |
| 0:00:00.393160664 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x20385655 UV8 | |
| 0:00:00.393219201 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x31324d59 YM21 | |
| 0:00:00.393287979 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x56555959 YYUV | |
| 0:00:00.393358238 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x59555956 VYUY | |
| 0:00:00.393422553 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x50313459 Y41P | |
| 0:00:00.393468219 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x34343459 Y444 | |
| 0:00:00.393510571 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x4f565559 YUVO | |
| 0:00:00.393557016 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x50565559 YUVP | |
| 0:00:00.393614219 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x34565559 YUV4 | |
| 0:00:00.393681497 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x34324948 HI24 | |
| 0:00:00.393726478 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x32314d48 HM12 | |
| 0:00:00.393771478 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x3032344d M420 | |
| 0:00:00.393832386 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x32314d56 VM12 | |
| 0:00:00.394032867 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x3234564e NV42 | |
| 0:00:00.394177367 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:1606:gst_v4l2_object_v4l2fourcc_to_bare_struct: Unsupported fourcc 0x3436324d M264 | |
| Setting pipeline to PAUSED ... | |
| 0:00:00.401752432 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:524:gst_v4l2_open:<v4l2src0:src> Trying to open device /dev/video10 | |
| 0:00:00.401857710 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:66:gst_v4l2_get_capabilities:<v4l2src0> getting capabilities | |
| 0:00:00.401935987 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:138:gst_v4l2_fill_lists:<v4l2src0> getting enumerations | |
| 0:00:00.401946617 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:141:gst_v4l2_fill_lists:<v4l2src0> channels | |
| 0:00:00.402103284 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:213:gst_v4l2_fill_lists:<v4l2src0> norms | |
| 0:00:00.402116098 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:261:gst_v4l2_fill_lists:<v4l2src0> controls+menus | |
| 0:00:00.402248172 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00000000 | |
| 0:00:00.402305728 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:323:gst_v4l2_fill_lists:<v4l2src0> starting control class 'User Controls' | |
| 0:00:00.402317598 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980001 | |
| 0:00:00.402413654 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID brightness (980900) | |
| 0:00:00.402483709 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980900 | |
| 0:00:00.402548190 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID contrast (980901) | |
| 0:00:00.402617320 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980901 | |
| 0:00:00.402670394 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID saturation (980902) | |
| 0:00:00.402743098 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980902 | |
| 0:00:00.402816023 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID hue (980903) | |
| 0:00:00.402829597 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980903 | |
| 0:00:00.402907357 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID white_balance_automatic (98090c) | |
| 0:00:00.402919820 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 0098090c | |
| 0:00:00.403013116 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID gamma (980910) | |
| 0:00:00.403063949 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980910 | |
| 0:00:00.403856633 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID gain (980913) | |
| 0:00:00.403885596 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980913 | |
| 0:00:00.403905596 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID power_line_frequency (980918) unhandled, FIXME | |
| 0:00:00.403918355 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 00980918 | |
| 0:00:00.403934726 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID white_balance_temperature (98091a) unhandled, FIXME | |
| 0:00:00.403946967 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 0098091a | |
| 0:00:00.403961467 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:394:gst_v4l2_fill_lists:<v4l2src0> Adding ControlID sharpness (98091b) | |
| 0:00:00.403974263 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 0098091b | |
| 0:00:00.403989244 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID backlight_compensation (98091c) unhandled, FIXME | |
| 0:00:00.404000633 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 0098091c | |
| 0:00:00.404014059 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:323:gst_v4l2_fill_lists:<v4l2src0> starting control class 'Camera Controls' | |
| 0:00:00.404025504 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 009a0001 | |
| 0:00:00.404040633 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID auto_exposure (9a0901) unhandled, FIXME | |
| 0:00:00.404053152 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 009a0901 | |
| 0:00:00.404068096 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID exposure_time_absolute (9a0902) unhandled, FIXME | |
| 0:00:00.404079503 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 009a0902 | |
| 0:00:00.404092966 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:386:gst_v4l2_fill_lists:<v4l2src0> ControlID exposure_dynamic_framerate (9a0903) unhandled, FIXME | |
| 0:00:00.404104337 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:281:gst_v4l2_fill_lists:<v4l2src0> checking control 009a0903 | |
| 0:00:00.404115429 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:288:gst_v4l2_fill_lists:<v4l2src0> controls finished | |
| 0:00:00.404125911 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:457:gst_v4l2_fill_lists:<v4l2src0> done | |
| 0:00:00.404138892 1205 0x555626375d50 INFO v4l2 v4l2_calls.c:588:gst_v4l2_open:<v4l2src0:src> Opened device 'exploreHD USB Camera: exploreHD' (/dev/video10) successfully | |
| 0:00:00.404154355 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:856:gst_v4l2_set_defaults:<v4l2src0:src> tv_norm=0x0, norm=(nil) | |
| 0:00:00.404167726 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:737:gst_v4l2_get_norm:<v4l2src0:src> getting norm | |
| 0:00:00.404179744 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:750:gst_v4l2_get_norm: Failed to get the current norm for device /dev/video10 | |
| 0:00:00.404192059 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:1093:gst_v4l2_get_input:<v4l2src0:src> trying to get input | |
| 0:00:00.404205263 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:1103:gst_v4l2_get_input:<v4l2src0:src> input: 0 | |
| Pipeline is live and does not need PREROLL ... | |
| 0:00:00.404962502 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1093:gst_v4l2_get_input:<v4l2src0:src> trying to get input | |
| Pipeline is PREROLLED ... | |
| Setting pipeline to PLAYING ... | |
| 0:00:00.405058799 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1103:gst_v4l2_get_input:<v4l2src0:src> input: 0 | |
| 0:00:00.405110558 1205 0x5556264e3b60 INFO v4l2src gstv4l2src.c:708:gst_v4l2src_query_preferred_size:<v4l2src0> Detect input 0 as `Input 1` | |
| 0:00:00.405165261 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:764:gst_v4l2src_setup_source_crop:<v4l2src0> No cropping requested, keep current preferred size | |
| New clock: GstSystemClock | |
| 0:00:00.405225113 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:1182:gst_v4l2_object_fill_format_list:<v4l2src0:src> getting src format enumerations | |
| 0:00:00.405281447 1205 0x5556264e3b60 INFO v4l2 gstv4l2object.c:1219:gst_v4l2_object_fill_format_list:<v4l2src0:src> got 1 format(s): | |
| 0:00:00.405330150 1205 0x5556264e3b60 INFO v4l2 gstv4l2object.c:1223:gst_v4l2_object_fill_format_list:<v4l2src0:src> H264 | |
| 0:00:00.405384446 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:2807:gst_v4l2_object_probe_caps_for_format:<v4l2src0:src> Enumerating frame sizes for H264 | |
| 0:00:00.405511687 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:2833:gst_v4l2_object_probe_caps_for_format:<v4l2src0:src> done iterating discrete frame sizes | |
| 0:00:00.405643483 1205 0x5556264e3b60 INFO v4l2 gstv4l2object.c:4738:gst_v4l2_object_probe_caps:<v4l2src0:src> probed caps: video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)800, height=(int)600, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)640, height=(int)360, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)352, height=(int)288, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)320, height=(int)240, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 } | |
| 0:00:00.405774687 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:808:gst_v4l2src_negotiate:<v4l2src0> caps of src: video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)800, height=(int)600, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)640, height=(int)360, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)352, height=(int)288, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 }; video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)320, height=(int)240, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 } | |
| 0:00:00.405911112 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:816:gst_v4l2src_negotiate:<v4l2src0> caps of peer: video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)avc, alignment=(string)au; video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string){ nal, au }; video/x-h264, width=(int)1920, height=(int)1080 | |
| 0:00:00.406021760 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:822:gst_v4l2src_negotiate:<v4l2src0> intersect: video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 } | |
| 0:00:00.406101186 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:556:gst_v4l2src_fixate:<v4l2src0> Fixating caps video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 25/1, 20/1, 15/1, 10/1, 5/1, 30/1, 25/1, 20/1, 15/1, 10/1, 5/1 } | |
| 0:00:00.406158223 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:557:gst_v4l2src_fixate:<v4l2src0> Preferred size 1920x1080 | |
| 0:00:00.406221020 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:580:gst_v4l2src_fixate:<v4l2src0> sorted and normalized caps video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1 | |
| 0:00:00.406289056 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:4220:gst_v4l2_object_try_format:<v4l2src0:src> Trying format video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1 | |
| 0:00:00.406369334 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3608:gst_v4l2_object_set_format_full:<v4l2src0> progressive video | |
| 0:00:00.406429593 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3754:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired format 1920x1080, format H264 stride: 0 | |
| 0:00:00.406489519 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3804:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired format is 1920x1080, format H264, nb planes 1 | |
| 0:00:00.406549760 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3816:gst_v4l2_object_set_format_full:<v4l2src0:src> stride 0 | |
| 0:00:00.406604575 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3834:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired colorspace is 0:0:0:0 | |
| 0:00:00.422324779 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3857:gst_v4l2_object_set_format_full:<v4l2src0:src> Got format of 1920x1080, format H264, nb planes 1, colorspace 8:0:1:1 field: none | |
| 0:00:00.422390019 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3871:gst_v4l2_object_set_format_full:<v4l2src0:src> stride 3840, sizeimage 4147200 | |
| 0:00:00.422455408 1205 0x5556264e3b60 DEBUG v4l2src gstv4l2src.c:638:gst_v4l2src_fixate:<v4l2src0> fixated caps video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:5:1 | |
| 0:00:00.422524260 1205 0x5556264e3b60 INFO v4l2src gstv4l2src.c:854:gst_v4l2src_negotiate:<v4l2src0> fixated to: video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:5:1 | |
| 0:00:00.422713667 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:4624:gst_v4l2_object_stop:<v4l2src0:src> stopping | |
| 0:00:00.422787352 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:4398:gst_v4l2_object_set_crop:<v4l2src0:src> Desired cropping left 0, top 0, size 1920x1080 | |
| 0:00:00.422842389 1205 0x5556264e3b60 WARN v4l2 gstv4l2object.c:4410:gst_v4l2_object_set_crop:<v4l2src0:src> VIDIOC_S_CROP failed | |
| 0:00:00.422893612 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:4211:gst_v4l2_object_set_format:<v4l2src0:src> Setting format to video/x-h264, width=(int)1920, height=(int)1080, stream-format=(string)byte-stream, alignment=(string)au, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:5:1 | |
| 0:00:00.422965500 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3608:gst_v4l2_object_set_format_full:<v4l2src0> progressive video | |
| 0:00:00.423029611 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3754:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired format 1920x1080, format H264 stride: 0 | |
| 0:00:00.423082667 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3804:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired format is 1920x1080, format H264, nb planes 1 | |
| 0:00:00.423133445 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3816:gst_v4l2_object_set_format_full:<v4l2src0:src> stride 0 | |
| 0:00:00.423192407 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3834:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired colorspace is 3:2:1:1 | |
| 0:00:00.438919723 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3857:gst_v4l2_object_set_format_full:<v4l2src0:src> Got format of 1920x1080, format H264, nb planes 1, colorspace 8:2:1:1 field: none | |
| 0:00:00.438945297 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3871:gst_v4l2_object_set_format_full:<v4l2src0:src> stride 3840, sizeimage 4147200 | |
| 0:00:00.438979593 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3956:gst_v4l2_object_set_format_full:<v4l2src0:src> Desired framerate: 30/1 | |
| 0:00:00.438996519 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3972:gst_v4l2_object_set_format_full:<v4l2src0:src> Got capture framerate: 30/1 | |
| 0:00:00.454654594 1205 0x5556264e3b60 INFO v4l2 gstv4l2object.c:4005:gst_v4l2_object_set_format_full:<v4l2src0:src> Set capture framerate to 30/1 | |
| 0:00:00.454669519 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3414:gst_v4l2_object_save_format:<v4l2src0:src> Got sizeimage 4147200 | |
| 0:00:00.454697575 1205 0x5556264e3b60 WARN v4l2 gstv4l2object.c:3228:gst_v4l2_object_reset_compose_region:<v4l2src0:src> Failed to get default compose rectangle with VIDIOC_G_SELECTION: Invalid argument | |
| 0:00:00.454712242 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:3132:gst_v4l2_object_setup_pool:<v4l2src0:src> initializing the capture system | |
| 0:00:00.454726742 1205 0x5556264e3b60 INFO v4l2 gstv4l2object.c:3164:gst_v4l2_object_setup_pool:<v4l2src0:src> accessing buffers via mode 4 | |
| 0:00:00.454914741 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:538:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> config GstBufferPoolConfig, caps=(GstCaps)"video/x-h264\,\ width\=\(int\)1920\,\ height\=\(int\)1080\,\ stream-format\=\(string\)byte-stream\,\ alignment\=\(string\)au\,\ pixel-aspect-ratio\=\(fraction\)1/1\,\ framerate\=\(fraction\)30/1\,\ interlace-mode\=\(string\)progressive\,\ colorimetry\=\(string\)2:4:5:1", size=(uint)4147200, min-buffers=(uint)0, max-buffers=(uint)0, allocator=(GstAllocator)"NULL", params=(GstAllocationParams)NULL; | |
| 0:00:00.454958445 1205 0x5556264e3b60 INFO v4l2bufferpool gstv4l2bufferpool.c:586:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> increasing minimum buffers to 2 | |
| 0:00:00.454972575 1205 0x5556264e3b60 INFO v4l2bufferpool gstv4l2bufferpool.c:599:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> reducing maximum buffers to 32 | |
| 0:00:00.454998260 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1093:gst_v4l2_get_input:<v4l2src0:src> trying to get input | |
| 0:00:00.455013982 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1103:gst_v4l2_get_input:<v4l2src0:src> input: 0 | |
| 0:00:00.455026649 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1248:gst_v4l2_subscribe_event:<v4l2src0:src> Subscribing to 'SOURCE_CHANGE' event | |
| 0:00:00.455041501 1205 0x5556264e3b60 DEBUG v4l2 v4l2_calls.c:1264:gst_v4l2_subscribe_event:<v4l2src0:src> Cannot subscribe to 'SOURCE_CHANGE' event: not supported | |
| 0:00:00.455054352 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:5004:gst_v4l2_object_decide_allocation:<v4l2src0:src> decide allocation | |
| 0:00:00.455073501 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:5033:gst_v4l2_object_decide_allocation:<v4l2src0:src> allocation: size:0 min:0 max:0 pool:(NULL) | |
| 0:00:00.455120352 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:5100:gst_v4l2_object_decide_allocation:<v4l2src0:src> streaming mode: using our own pool <v4l2src0:pool0:src> | |
| 0:00:00.455158519 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:5176:gst_v4l2_object_decide_allocation:<v4l2src0:src> setting own pool config to GstBufferPoolConfig, caps=(GstCaps)"video/x-h264\,\ width\=\(int\)1920\,\ height\=\(int\)1080\,\ stream-format\=\(string\)byte-stream\,\ alignment\=\(string\)au\,\ pixel-aspect-ratio\=\(fraction\)1/1\,\ framerate\=\(fraction\)30/1\,\ interlace-mode\=\(string\)progressive\,\ colorimetry\=\(string\)2:4:5:1", size=(uint)4147200, min-buffers=(uint)4, max-buffers=(uint)0, allocator=(GstAllocator)"NULL", params=(GstAllocationParams)NULL; | |
| 0:00:00.455190593 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:538:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> config GstBufferPoolConfig, caps=(GstCaps)"video/x-h264\,\ width\=\(int\)1920\,\ height\=\(int\)1080\,\ stream-format\=\(string\)byte-stream\,\ alignment\=\(string\)au\,\ pixel-aspect-ratio\=\(fraction\)1/1\,\ framerate\=\(fraction\)30/1\,\ interlace-mode\=\(string\)progressive\,\ colorimetry\=\(string\)2:4:5:1", size=(uint)4147200, min-buffers=(uint)4, max-buffers=(uint)0, allocator=(GstAllocator)"NULL", params=(GstAllocationParams)NULL; | |
| 0:00:00.455216797 1205 0x5556264e3b60 INFO v4l2bufferpool gstv4l2bufferpool.c:599:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> reducing maximum buffers to 32 | |
| 0:00:00.455254667 1205 0x5556264e3b60 DEBUG v4l2 gstv4l2object.c:5183:gst_v4l2_object_decide_allocation:<v4l2src0:src> own pool config changed to GstBufferPoolConfig, caps=(GstCaps)"video/x-h264\,\ width\=\(int\)1920\,\ height\=\(int\)1080\,\ stream-format\=\(string\)byte-stream\,\ alignment\=\(string\)au\,\ pixel-aspect-ratio\=\(fraction\)1/1\,\ framerate\=\(fraction\)30/1\,\ interlace-mode\=\(string\)progressive\,\ colorimetry\=\(string\)2:4:5:1", size=(uint)4147200, min-buffers=(uint)4, max-buffers=(uint)32, allocator=(GstAllocator)"NULL", params=(GstAllocationParams)NULL; | |
| 0:00:00.455291167 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:538:gst_v4l2_buffer_pool_set_config:<v4l2src0:pool0:src> config GstBufferPoolConfig, caps=(GstCaps)"video/x-h264\,\ width\=\(int\)1920\,\ height\=\(int\)1080\,\ stream-format\=\(string\)byte-stream\,\ alignment\=\(string\)au\,\ pixel-aspect-ratio\=\(fraction\)1/1\,\ framerate\=\(fraction\)30/1\,\ interlace-mode\=\(string\)progressive\,\ colorimetry\=\(string\)2:4:5:1", size=(uint)4147200, min-buffers=(uint)4, max-buffers=(uint)32, allocator=(GstAllocator)"NULL", params=(GstAllocationParams)NULL; | |
| 0:00:00.455329834 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:784:gst_v4l2_buffer_pool_start:<v4l2src0:pool0:src> activating pool | |
| 0:00:00.455346685 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:831:gst_v4l2_buffer_pool_start:<v4l2src0:pool0:src> requesting 4 MMAP buffers | |
| 0:00:00.464589064 1205 0x5556264e3b60 DEBUG v4l2allocator gstv4l2allocator.c:706:gst_v4l2_allocator_start:<v4l2src0:pool0:src:allocator> allocated 4 mmap buffers out of 4 requested | |
| 0:00:00.464680786 1205 0x5556264e3b60 WARN v4l2bufferpool gstv4l2bufferpool.c:848:gst_v4l2_buffer_pool_start:<v4l2src0:pool0:src> Uncertain or not enough buffers, enabling copy threshold | |
| 0:00:00.464768267 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:1603:gst_v4l2_buffer_pool_complete_release_buffer:<v4l2src0:pool0:src> complete release buffer 0x555626501c60 (queued = no) | |
| 0:00:00.464803841 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:1603:gst_v4l2_buffer_pool_complete_release_buffer:<v4l2src0:pool0:src> complete release buffer 0x555626501d80 (queued = no) | |
| 0:00:00.464826637 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:1603:gst_v4l2_buffer_pool_complete_release_buffer:<v4l2src0:pool0:src> complete release buffer 0x555626501ea0 (queued = no) | |
| 0:00:00.464848137 1205 0x5556264e3b60 DEBUG v4l2bufferpool gstv4l2bufferpool.c:1603:gst_v4l2_buffer_pool_complete_release_buffer:<v4l2src0:pool0:src> complete release buffer 0x7fff94022000 (queued = no) | |
| 0:00:00.472585092 1205 0x5556264e3b60 ERROR v4l2bufferpool gstv4l2bufferpool.c:712:gst_v4l2_buffer_pool_streamon:<v4l2src0:pool0:src> error with STREAMON 28 (No space left on device) | |
| 0:00:00.472698221 1205 0x5556264e3b60 WARN v4l2src gstv4l2src.c:976:gst_v4l2src_decide_allocation:<v4l2src0> error: Failed to allocate required memory. | |
| 0:00:00.472713017 1205 0x5556264e3b60 WARN v4l2src gstv4l2src.c:976:gst_v4l2src_decide_allocation:<v4l2src0> error: Buffer pool activation failed | |
| ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed to allocate required memory. | |
| Additional debug info: | |
| ../sys/v4l2/gstv4l2src.c(976): gst_v4l2src_decide_allocation (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: | |
| Buffer pool activation failed | |
| Execution ended after 0:00:00.067810422 | |
| Setting pipeline to NULL ... | |
| ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Internal data stream error. | |
| Additional debug info: | |
| ../libs/gst/base/gstbasesrc.c(3132): gst_base_src_loop (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: | |
| streaming stopped, reason not-negotiated (-4) | |
| 0:00:00.473194869 1205 0x555626375d50 DEBUG v4l2 gstv4l2object.c:4624:gst_v4l2_object_stop:<v4l2src0:src> stopping | |
| 0:00:00.473209998 1205 0x555626375d50 DEBUG v4l2bufferpool gstv4l2bufferpool.c:1044:gst_v4l2_buffer_pool_orphan:<v4l2src0:pool0:src> orphaning pool | |
| 0:00:00.473360609 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:712:gst_v4l2_close:<v4l2src0:src> Trying to close /dev/video10 | |
| 0:00:00.473496442 1205 0x555626375d50 DEBUG v4l2 v4l2_calls.c:465:gst_v4l2_empty_lists:<v4l2src0:src> deleting enumerations | |
| Freeing pipeline ... |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.1.77-v8-16k+ (kunal@dwe-ubuntu) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Mon Feb 19 10:01:00 PST 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001a000000, size 320 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376 | |
| [ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521984 | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E5:3D:87 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=fef29027-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=US | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) | |
| [ 0.000000] Memory: 7904016K/8384512K available (12352K kernel code, 2184K rwdata, 4096K rodata, 4480K init, 1217K bss, 152816K reserved, 327680K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] ftrace: allocating 40135 entries in 40 pages | |
| [ 0.000000] ftrace: allocated 40 pages with 2 groups | |
| [ 0.000000] trace event string verifier disabled | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Rude variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000148] Console: colour dummy device 80x25 | |
| [ 0.000280] printk: console [tty1] enabled | |
| [ 0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) | |
| [ 0.000303] pid_max: default: 32768 minimum: 301 | |
| [ 0.000324] LSM: Security Framework initializing | |
| [ 0.000383] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000408] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000754] cgroup: Disabling memory control group subsystem | |
| [ 0.001112] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001119] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001150] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001154] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001176] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001180] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001238] rcu: Hierarchical SRCU implementation. | |
| [ 0.001242] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001819] EFI services will not be available. | |
| [ 0.001907] smp: Bringing up secondary CPUs ... | |
| [ 0.002073] Detected PIPT I-cache on CPU1 | |
| [ 0.002120] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002304] Detected PIPT I-cache on CPU2 | |
| [ 0.002339] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002507] Detected PIPT I-cache on CPU3 | |
| [ 0.002539] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002566] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002583] SMP: Total of 4 processors activated. | |
| [ 0.002586] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002589] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002595] CPU features: detected: Common not Private translations | |
| [ 0.002598] CPU features: detected: CRC32 instructions | |
| [ 0.002602] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002605] CPU features: detected: LSE atomic instructions | |
| [ 0.002609] CPU features: detected: Privileged Access Never | |
| [ 0.002612] CPU features: detected: RAS Extension Support | |
| [ 0.002616] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002651] CPU: All CPU(s) started at EL2 | |
| [ 0.002654] alternatives: applying system-wide alternatives | |
| [ 0.004523] devtmpfs: initialized | |
| [ 0.007071] Enabled cp15_barrier support | |
| [ 0.007081] Enabled setend support | |
| [ 0.007136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.007145] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) | |
| [ 0.008048] pinctrl core: initialized pinctrl subsystem | |
| [ 0.008239] DMI not present or invalid. | |
| [ 0.008440] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.009003] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.009052] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.009103] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.009129] audit: initializing netlink subsys (disabled) | |
| [ 0.009182] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.009294] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.009304] cpuidle: using governor menu | |
| [ 0.009378] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.009409] ASID allocator initialised with 32768 entries | |
| [ 0.009708] Serial: AMBA PL011 UART driver | |
| [ 0.010532] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.010805] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.730588] printk: console [ttyAMA10] enabled | |
| [ 0.743055] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd | |
| [ 0.757109] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000 | |
| [ 0.772549] KASLR enabled | |
| [ 0.787294] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.794914] iommu: Default domain type: Translated | |
| [ 0.799812] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.806191] SCSI subsystem initialized | |
| [ 0.809995] usbcore: registered new interface driver usbfs | |
| [ 0.815508] usbcore: registered new interface driver hub | |
| [ 0.820843] usbcore: registered new device driver usb | |
| [ 0.825948] usb_phy_generic phy: supply vcc not found, using dummy regulator | |
| [ 0.833089] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.838071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.847248] PTP clock support registered | |
| [ 0.851387] vgaarb: loaded | |
| [ 0.854206] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.860428] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.864374] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) | |
| [ 0.871473] FS-Cache: Loaded | |
| [ 0.874385] CacheFiles: Loaded | |
| [ 0.878854] NET: Registered PF_INET protocol family | |
| [ 0.883902] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) | |
| [ 0.893852] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) | |
| [ 0.902458] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) | |
| [ 0.910237] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) | |
| [ 0.918455] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) | |
| [ 0.927708] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.934411] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) | |
| [ 0.942043] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.948955] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.956360] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.962172] RPC: Registered named UNIX socket transport module. | |
| [ 0.968119] RPC: Registered udp transport module. | |
| [ 0.972837] RPC: Registered tcp transport module. | |
| [ 0.977556] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.984028] PCI: CLS 0 bytes, default 64 | |
| [ 0.988118] Trying to unpack rootfs image as initramfs... | |
| [ 0.998593] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available | |
| [ 1.006952] kvm [1]: IPA Size Limit: 40 bits | |
| [ 1.011259] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) | |
| [ 1.020072] kvm [1]: vgic interrupt IRQ9 | |
| [ 1.024060] kvm [1]: VHE mode initialized successfully | |
| [ 1.077848] Initialise system trusted keyrings | |
| [ 1.082416] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
| [ 1.090781] zbud: loaded | |
| [ 1.093892] NFS: Registering the id_resolver key type | |
| [ 1.098983] Key type id_resolver registered | |
| [ 1.103184] Key type id_legacy registered | |
| [ 1.107237] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.113974] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 1.121487] F2FS not supported on PAGE_SIZE(16384) != 4096 | |
| [ 1.127081] Key type asymmetric registered | |
| [ 1.131194] Asymmetric key parser 'x509' registered | |
| [ 1.136126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 1.143613] io scheduler mq-deadline registered | |
| [ 1.148173] io scheduler kyber registered | |
| [ 1.152681] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31) | |
| [ 1.161887] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32) | |
| [ 1.168448] Freeing initrd memory: 10848K | |
| [ 1.169666] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33) | |
| [ 1.181339] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34) | |
| [ 1.189069] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35) | |
| [ 1.198196] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36) | |
| [ 1.206802] gpio-461 (RP1 RUN pin): hogged as output/high | |
| [ 1.244728] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.251308] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A | |
| [ 1.260603] serial serial0: tty port ttyS0 registered | |
| [ 1.265967] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.271438] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.279949] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.288769] brd: module loaded | |
| [ 1.293050] loop: module loaded | |
| [ 1.296318] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.303715] Loading iSCSI transport class v2.0-870. | |
| [ 1.309334] usbcore: registered new device driver r8152-cfgselector | |
| [ 1.315640] usbcore: registered new interface driver r8152 | |
| [ 1.321156] usbcore: registered new interface driver lan78xx | |
| [ 1.326845] usbcore: registered new interface driver smsc95xx | |
| [ 1.332697] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.338484] dwc_otg: FIQ enabled | |
| [ 1.338485] dwc_otg: NAK holdoff enabled | |
| [ 1.338486] dwc_otg: FIQ split-transaction FSM enabled | |
| [ 1.338489] Module dwc_common_port init | |
| [ 1.338614] usbcore: registered new interface driver uas | |
| [ 1.343954] usbcore: registered new interface driver usb-storage | |
| [ 1.350061] mousedev: PS/2 mouse device common for all mice | |
| [ 1.363375] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.369730] rpi-rtc soc:rpi_rtc: setting system clock to 2024-02-19T19:26:50 UTC (1708370810) | |
| [ 1.378607] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.385163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.393814] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.400021] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.404432] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.410286] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.416350] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.422824] hid: raw HID events driver (C) Jiri Kosina | |
| [ 1.427998] usbcore: registered new interface driver usbhid | |
| [ 1.433591] usbhid: USB HID core driver | |
| [ 1.437563] NET: Registered PF_PACKET protocol family | |
| [ 1.442654] Key type dns_resolver registered | |
| [ 1.447152] registered taskstats version 1 | |
| [ 1.451278] Loading compiled-in X.509 certificates | |
| [ 1.456209] Key type .fscrypt registered | |
| [ 1.460147] Key type fscrypt-provisioning registered | |
| [ 1.466445] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.473445] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.482539] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.490841] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.499146] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.507448] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.516917] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE | |
| [ 1.525225] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.530241] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.536708] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.542214] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.552784] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.563973] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.570027] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.576492] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.690213] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.696872] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.702914] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.709210] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.715506] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.721864] pci 0000:01:00.0: supports D1 | |
| [ 1.725886] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.742216] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.748865] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.756032] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.763198] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.770365] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 1.777532] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.782514] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.789680] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.798160] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.806693] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.812844] pcieport 0000:00:00.0: PME: Signaling with IRQ 39 | |
| [ 1.818687] pcieport 0000:00:00.0: AER: enabled with IRQ 39 | |
| [ 1.824354] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 1.833442] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 1.842708] rp1 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 1.849303] rp1 0000:01:00.0: chip_id 0x20001927 | |
| [ 1.874352] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:e5:3d:87) | |
| [ 1.885195] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels | |
| [ 1.893754] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.898830] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 1.906535] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 1.915542] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000 | |
| [ 1.921378] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.926448] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 1.933701] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 1.939861] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 1.948163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.955417] usb usb1: Product: xHCI Host Controller | |
| [ 1.960311] usb usb1: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 1.966427] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 1.971004] hub 1-0:1.0: USB hub found | |
| [ 1.974778] hub 1-0:1.0: 2 ports detected | |
| [ 1.978926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 1.987228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.994482] usb usb2: Product: xHCI Host Controller | |
| [ 1.999376] usb usb2: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.005566] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.010163] hub 2-0:1.0: USB hub found | |
| [ 2.013935] hub 2-0:1.0: 1 port detected | |
| [ 2.018136] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.023326] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.031028] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 2.040144] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000 | |
| [ 2.045978] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.051049] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.058412] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.064558] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 2.072859] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.080212] usb usb3: Product: xHCI Host Controller | |
| [ 2.085107] usb usb3: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.091223] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.095859] hub 3-0:1.0: USB hub found | |
| [ 2.099631] hub 3-0:1.0: 2 ports detected | |
| [ 2.103768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 2.112180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.119460] usb usb4: Product: xHCI Host Controller | |
| [ 2.124355] usb usb4: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.130634] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.135188] hub 4-0:1.0: USB hub found | |
| [ 2.138958] hub 4-0:1.0: 1 port detected | |
| [ 2.143506] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.151998] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.160038] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.168200] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.174069] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.182390] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.190605] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.196659] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.204626] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.212691] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.219880] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.228225] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu | |
| [ 2.235634] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu | |
| [ 2.242902] platform axi:gpu: Adding to iommu group 1 | |
| [ 2.248014] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu | |
| [ 2.255214] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.262311] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.270772] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.277611] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default | |
| [ 2.277950] mmc1: CQHCI version 5.10 | |
| [ 2.278359] of_cfs_init | |
| [ 2.278393] of_cfs_init: OK | |
| [ 2.299937] mmc0: CQHCI version 5.10 | |
| [ 2.339309] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.362208] usb 3-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 2.442471] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 | |
| [ 2.449342] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.455313] mmcblk0: p1 p2 | |
| [ 2.458200] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.484749] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.495738] Freeing unused kernel memory: 4480K | |
| [ 2.500345] Run /init as init process | |
| [ 2.504020] with arguments: | |
| [ 2.504022] /init | |
| [ 2.504023] with environment: | |
| [ 2.504024] HOME=/ | |
| [ 2.504025] TERM=linux | |
| [ 2.514375] usb 3-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 | |
| [ 2.522622] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| [ 2.522860] mmc1: new ultra high speed DDR50 SDIO card at address 0001 | |
| [ 2.576702] hub 3-1:1.0: USB hub found | |
| [ 2.580519] hub 3-1:1.0: 7 ports detected | |
| [ 2.798201] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. | |
| [ 2.934212] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd | |
| [ 3.091439] NET: Registered PF_INET6 protocol family | |
| [ 3.096839] Segment Routing with IPv6 | |
| [ 3.100538] In-situ OAM (IOAM) with IPv6 | |
| [ 3.104869] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 3.113268] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.120616] usb 3-1.1: Product: exploreHD USB Camera | |
| [ 3.125602] usb 3-1.1: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.131548] usb 3-1.1: SerialNumber: SN00009 | |
| [ 3.138707] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
| [ 3.171614] systemd[1]: Detected architecture arm64. | |
| [ 3.182231] systemd[1]: Hostname set to <raspberrypi>. | |
| [ 3.266251] usb 3-1.2: new high-speed USB device number 4 using xhci-hcd | |
| [ 3.273139] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 3.436727] systemd[1]: Queued start job for default target multi-user.target. | |
| [ 3.444015] usb 3-1.2: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.452410] usb 3-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.459750] usb 3-1.2: Product: exploreHD USB Camera | |
| [ 3.464732] usb 3-1.2: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.470674] usb 3-1.2: SerialNumber: SN00009 | |
| [ 3.494852] systemd[1]: Created slice system-getty.slice - Slice /system/getty. | |
| [ 3.502600] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. | |
| [ 3.510801] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. | |
| [ 3.519923] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. | |
| [ 3.528951] systemd[1]: Created slice user.slice - User and Session Slice. | |
| [ 3.535983] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. | |
| [ 3.547199] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. | |
| [ 3.557967] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. | |
| [ 3.570618] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-fef29027\x2d01.device - /dev/disk/by-partuuid/fef29027-01... | |
| [ 3.582043] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... | |
| [ 3.589429] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. | |
| [ 3.597172] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. | |
| [ 3.606154] systemd[1]: Reached target paths.target - Path Units. | |
| [ 3.612341] systemd[1]: Reached target slices.target - Slice Units. | |
| [ 3.618688] systemd[1]: Reached target swap.target - Swaps. | |
| [ 3.624341] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. | |
| [ 3.632906] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. | |
| [ 3.638208] usb 3-1.3: new high-speed USB device number 5 using xhci-hcd | |
| [ 3.648488] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. | |
| [ 3.657527] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. | |
| [ 3.666026] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). | |
| [ 3.675121] systemd[1]: Listening on systemd-journald.socket - Journal Socket. | |
| [ 3.683344] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. | |
| [ 3.691628] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
| [ 3.699788] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
| [ 3.738313] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
| [ 3.747322] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... | |
| [ 3.756207] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... | |
| [ 3.764550] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). | |
| [ 3.782430] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... | |
| [ 3.792893] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... | |
| [ 3.802874] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... | |
| [ 3.813270] systemd[1]: Starting [email protected] - Load Kernel Module configfs... | |
| [ 3.822978] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
| [ 3.832484] systemd[1]: Starting [email protected] - Load Kernel Module drm... | |
| [ 3.840794] usb 3-1.3: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.841434] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... | |
| [ 3.849235] usb 3-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.865304] usb 3-1.3: Product: exploreHD USB Camera | |
| [ 3.870310] usb 3-1.3: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.876357] usb 3-1.3: SerialNumber: SN00009 | |
| [ 3.877493] systemd[1]: Starting [email protected] - Load Kernel Module fuse... | |
| [ 3.889858] systemd[1]: Starting [email protected] - Load Kernel Module loop... | |
| [ 3.897761] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
| [ 3.915954] systemd[1]: Starting systemd-journald.service - Journal Service... | |
| [ 3.932117] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... | |
| [ 3.941434] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... | |
| [ 3.952049] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
| [ 3.961068] fuse: init (API version 7.37) | |
| [ 3.962855] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
| [ 3.973095] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. | |
| [ 3.973427] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected] | |
| [ 3.991195] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. | |
| [ 4.000454] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. | |
| [ 4.010244] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. | |
| [ 4.019591] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.022222] usb 3-1.4: new high-speed USB device number 6 using xhci-hcd | |
| [ 4.026952] systemd[1]: Finished [email protected] - Load Kernel Module configfs. | |
| [ 4.042142] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. | |
| [ 4.049265] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
| [ 4.057497] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. | |
| [ 4.064922] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
| [ 4.073857] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.080729] systemd[1]: Finished [email protected] - Load Kernel Module fuse. | |
| [ 4.088700] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.095546] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. | |
| [ 4.095662] systemd[1]: Finished [email protected] - Load Kernel Module loop. | |
| [ 4.110051] systemd[1]: Started systemd-journald.service - Journal Service. | |
| [ 4.163868] systemd-journald[277]: Received client request to flush runtime journal. | |
| [ 4.189340] usb 3-1.4: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.197757] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.197760] usb 3-1.4: Product: exploreHD USB Camera | |
| [ 4.197763] usb 3-1.4: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.197766] usb 3-1.4: SerialNumber: SN00009 | |
| [ 4.326217] usb 3-1.5: new high-speed USB device number 7 using xhci-hcd | |
| [ 4.486793] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.486801] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.486803] usb 3-1.5: Product: exploreHD USB Camera | |
| [ 4.486805] usb 3-1.5: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.486808] usb 3-1.5: SerialNumber: SN00009 | |
| [ 4.606238] usb 3-1.6: new high-speed USB device number 8 using xhci-hcd | |
| [ 4.630057] mc: Linux media interface: v0.10 | |
| [ 4.676134] videodev: Linux video capture interface: v2.00 | |
| [ 4.676577] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 4.679852] input: pwr_button as /devices/platform/pwr_button/input/input0 | |
| [ 4.682302] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 4.682381] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 4.685313] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 4.689753] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 4.690554] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode | |
| [ 4.690713] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode | |
| [ 4.703835] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 4.707377] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 4.723781] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 4.723932] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 4.724201] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 4.738473] usb 3-1.1: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.774679] usb 3-1.6: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.774689] usb 3-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.774692] usb 3-1.6: Product: exploreHD USB Camera | |
| [ 4.774695] usb 3-1.6: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.774697] usb 3-1.6: SerialNumber: SN00009 | |
| [ 4.785091] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input1 | |
| [ 4.786197] usb 3-1.2: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.818715] usb 3-1.6: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.839310] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input2 | |
| [ 4.840623] usb 3-1.3: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.845495] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.6/3-1.6:1.0/input/input3 | |
| [ 4.865360] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input4 | |
| [ 4.866433] usb 3-1.4: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.891142] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input5 | |
| [ 4.892210] usb 3-1.5: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.917068] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.5/3-1.5:1.0/input/input6 | |
| [ 4.917436] usbcore: registered new interface driver uvcvideo | |
| [ 4.919159] Bluetooth: Core ver 2.22 | |
| [ 4.919227] NET: Registered PF_BLUETOOTH protocol family | |
| [ 4.919231] Bluetooth: HCI device and connection manager initialized | |
| [ 4.919242] Bluetooth: HCI socket layer initialized | |
| [ 4.919245] Bluetooth: L2CAP socket layer initialized | |
| [ 4.919256] Bluetooth: SCO socket layer initialized | |
| [ 4.922242] usb 3-1.7: new high-speed USB device number 9 using xhci-hcd | |
| [ 4.959498] Bluetooth: HCI UART driver ver 2.3 | |
| [ 4.959516] Bluetooth: HCI UART protocol H4 registered | |
| [ 4.959586] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
| [ 4.960849] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator | |
| [ 4.961941] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator | |
| [ 4.964318] Bluetooth: HCI UART protocol Broadcom registered | |
| [ 4.973471] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 4.973609] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700 | |
| [ 4.973614] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000 | |
| [ 4.973616] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000 | |
| [ 4.973619] pispbe 1000880000.pisp_be: Register nodes for group 0 | |
| [ 4.973716] pispbe 1000880000.pisp_be: input device node registered as /dev/video24 | |
| [ 4.973763] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video25 | |
| [ 4.973791] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video26 | |
| [ 4.973831] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video27 | |
| [ 4.973858] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video28 | |
| [ 4.973886] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video29 | |
| [ 4.973915] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video30 | |
| [ 4.973943] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video31 | |
| [ 4.973967] pispbe 1000880000.pisp_be: config device node registered as /dev/video32 | |
| [ 4.974393] pispbe 1000880000.pisp_be: Register nodes for group 1 | |
| [ 4.974449] pispbe 1000880000.pisp_be: input device node registered as /dev/video33 | |
| [ 4.974484] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video34 | |
| [ 4.975916] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video35 | |
| [ 4.976623] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video36 | |
| [ 4.976666] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video37 | |
| [ 4.976692] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video38 | |
| [ 4.976734] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video39 | |
| [ 4.976763] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video40 | |
| [ 4.976798] pispbe 1000880000.pisp_be: config device node registered as /dev/video41 | |
| [ 4.982649] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 4.983647] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 5.030766] rpivid 1000800000.codec: Device registered as /dev/video42 | |
| [ 5.094511] usb 3-1.7: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 5.094524] usb 3-1.7: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 5.094527] usb 3-1.7: Product: exploreHD USB Camera | |
| [ 5.094530] usb 3-1.7: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 5.094532] usb 3-1.7: SerialNumber: SN00009 | |
| [ 5.110658] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 5.119769] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' | |
| [ 5.120102] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' | |
| [ 5.120421] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 5.120736] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ 5.138763] usb 3-1.7: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 5.163708] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.7/3-1.7:1.0/input/input7 | |
| [ 5.236351] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 | |
| [ 5.243577] brcmfmac: F1 signature read @0x18000000=0x15264345 | |
| [ 5.245699] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 5.250395] usbcore: registered new interface driver brcmfmac | |
| [ 5.319471] Bluetooth: hci0: BCM: chip id 107 | |
| [ 5.319711] Bluetooth: hci0: BCM: features 0x2f | |
| [ 5.320918] Bluetooth: hci0: BCM4345C0 | |
| [ 5.320930] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 | |
| [ 5.326888] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch | |
| [ 5.358090] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu | |
| [ 5.360692] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) | |
| [ 5.362967] Registered IR keymap rc-cec | |
| [ 5.363028] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 | |
| [ 5.363078] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input8 | |
| [ 5.370985] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.374755] Registered IR keymap rc-cec | |
| [ 5.374835] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 | |
| [ 5.374901] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input9 | |
| [ 5.375906] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.376074] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) | |
| [ 5.378505] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) | |
| [ 5.378647] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.378727] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.379403] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 | |
| [ 5.383521] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.387502] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.391661] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.427102] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 | |
| [ 5.597711] Adding 102368k swap on /var/swap. Priority:-2 extents:1 across:102368k SSFS | |
| [ 6.027163] Bluetooth: hci0: BCM: features 0x2f | |
| [ 6.028520] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 | |
| [ 6.028524] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 | |
| [ 6.028816] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) | |
| [ 6.204061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 6.204069] Bluetooth: BNEP filters: protocol multicast | |
| [ 6.204076] Bluetooth: BNEP socket layer initialized | |
| [ 6.206378] Bluetooth: MGMT ver 1.22 | |
| [ 6.211577] NET: Registered PF_ALG protocol family | |
| [ 6.233323] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 6.233334] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 6.236521] pps pps0: new PPS source ptp0 | |
| [ 6.236577] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 6.267038] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled | |
| [ 10.327252] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 10.327270] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 11.785636] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.1.77-v8-16k+ (kunal@dwe-ubuntu) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Mon Feb 19 10:01:00 PST 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001a000000, size 320 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376 | |
| [ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521984 | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E5:3D:87 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=fef29027-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=US | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) | |
| [ 0.000000] Memory: 7904016K/8384512K available (12352K kernel code, 2184K rwdata, 4096K rodata, 4480K init, 1217K bss, 152816K reserved, 327680K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] ftrace: allocating 40135 entries in 40 pages | |
| [ 0.000000] ftrace: allocated 40 pages with 2 groups | |
| [ 0.000000] trace event string verifier disabled | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Rude variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000148] Console: colour dummy device 80x25 | |
| [ 0.000280] printk: console [tty1] enabled | |
| [ 0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) | |
| [ 0.000303] pid_max: default: 32768 minimum: 301 | |
| [ 0.000324] LSM: Security Framework initializing | |
| [ 0.000383] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000408] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000754] cgroup: Disabling memory control group subsystem | |
| [ 0.001112] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001119] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001150] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001154] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001176] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001180] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001238] rcu: Hierarchical SRCU implementation. | |
| [ 0.001242] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001819] EFI services will not be available. | |
| [ 0.001907] smp: Bringing up secondary CPUs ... | |
| [ 0.002073] Detected PIPT I-cache on CPU1 | |
| [ 0.002120] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002304] Detected PIPT I-cache on CPU2 | |
| [ 0.002339] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002507] Detected PIPT I-cache on CPU3 | |
| [ 0.002539] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002566] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002583] SMP: Total of 4 processors activated. | |
| [ 0.002586] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002589] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002595] CPU features: detected: Common not Private translations | |
| [ 0.002598] CPU features: detected: CRC32 instructions | |
| [ 0.002602] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002605] CPU features: detected: LSE atomic instructions | |
| [ 0.002609] CPU features: detected: Privileged Access Never | |
| [ 0.002612] CPU features: detected: RAS Extension Support | |
| [ 0.002616] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002651] CPU: All CPU(s) started at EL2 | |
| [ 0.002654] alternatives: applying system-wide alternatives | |
| [ 0.004523] devtmpfs: initialized | |
| [ 0.007071] Enabled cp15_barrier support | |
| [ 0.007081] Enabled setend support | |
| [ 0.007136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.007145] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) | |
| [ 0.008048] pinctrl core: initialized pinctrl subsystem | |
| [ 0.008239] DMI not present or invalid. | |
| [ 0.008440] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.009003] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.009052] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.009103] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.009129] audit: initializing netlink subsys (disabled) | |
| [ 0.009182] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.009294] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.009304] cpuidle: using governor menu | |
| [ 0.009378] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.009409] ASID allocator initialised with 32768 entries | |
| [ 0.009708] Serial: AMBA PL011 UART driver | |
| [ 0.010532] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.010805] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.730588] printk: console [ttyAMA10] enabled | |
| [ 0.743055] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd | |
| [ 0.757109] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000 | |
| [ 0.772549] KASLR enabled | |
| [ 0.787294] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.794914] iommu: Default domain type: Translated | |
| [ 0.799812] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.806191] SCSI subsystem initialized | |
| [ 0.809995] usbcore: registered new interface driver usbfs | |
| [ 0.815508] usbcore: registered new interface driver hub | |
| [ 0.820843] usbcore: registered new device driver usb | |
| [ 0.825948] usb_phy_generic phy: supply vcc not found, using dummy regulator | |
| [ 0.833089] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.838071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.847248] PTP clock support registered | |
| [ 0.851387] vgaarb: loaded | |
| [ 0.854206] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.860428] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.864374] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) | |
| [ 0.871473] FS-Cache: Loaded | |
| [ 0.874385] CacheFiles: Loaded | |
| [ 0.878854] NET: Registered PF_INET protocol family | |
| [ 0.883902] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) | |
| [ 0.893852] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) | |
| [ 0.902458] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) | |
| [ 0.910237] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) | |
| [ 0.918455] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) | |
| [ 0.927708] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.934411] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) | |
| [ 0.942043] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.948955] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.956360] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.962172] RPC: Registered named UNIX socket transport module. | |
| [ 0.968119] RPC: Registered udp transport module. | |
| [ 0.972837] RPC: Registered tcp transport module. | |
| [ 0.977556] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.984028] PCI: CLS 0 bytes, default 64 | |
| [ 0.988118] Trying to unpack rootfs image as initramfs... | |
| [ 0.998593] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available | |
| [ 1.006952] kvm [1]: IPA Size Limit: 40 bits | |
| [ 1.011259] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) | |
| [ 1.020072] kvm [1]: vgic interrupt IRQ9 | |
| [ 1.024060] kvm [1]: VHE mode initialized successfully | |
| [ 1.077848] Initialise system trusted keyrings | |
| [ 1.082416] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
| [ 1.090781] zbud: loaded | |
| [ 1.093892] NFS: Registering the id_resolver key type | |
| [ 1.098983] Key type id_resolver registered | |
| [ 1.103184] Key type id_legacy registered | |
| [ 1.107237] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.113974] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 1.121487] F2FS not supported on PAGE_SIZE(16384) != 4096 | |
| [ 1.127081] Key type asymmetric registered | |
| [ 1.131194] Asymmetric key parser 'x509' registered | |
| [ 1.136126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 1.143613] io scheduler mq-deadline registered | |
| [ 1.148173] io scheduler kyber registered | |
| [ 1.152681] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31) | |
| [ 1.161887] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32) | |
| [ 1.168448] Freeing initrd memory: 10848K | |
| [ 1.169666] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33) | |
| [ 1.181339] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34) | |
| [ 1.189069] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35) | |
| [ 1.198196] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36) | |
| [ 1.206802] gpio-461 (RP1 RUN pin): hogged as output/high | |
| [ 1.244728] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.251308] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A | |
| [ 1.260603] serial serial0: tty port ttyS0 registered | |
| [ 1.265967] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.271438] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.279949] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.288769] brd: module loaded | |
| [ 1.293050] loop: module loaded | |
| [ 1.296318] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.303715] Loading iSCSI transport class v2.0-870. | |
| [ 1.309334] usbcore: registered new device driver r8152-cfgselector | |
| [ 1.315640] usbcore: registered new interface driver r8152 | |
| [ 1.321156] usbcore: registered new interface driver lan78xx | |
| [ 1.326845] usbcore: registered new interface driver smsc95xx | |
| [ 1.332697] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.338484] dwc_otg: FIQ enabled | |
| [ 1.338485] dwc_otg: NAK holdoff enabled | |
| [ 1.338486] dwc_otg: FIQ split-transaction FSM enabled | |
| [ 1.338489] Module dwc_common_port init | |
| [ 1.338614] usbcore: registered new interface driver uas | |
| [ 1.343954] usbcore: registered new interface driver usb-storage | |
| [ 1.350061] mousedev: PS/2 mouse device common for all mice | |
| [ 1.363375] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.369730] rpi-rtc soc:rpi_rtc: setting system clock to 2024-02-19T19:26:50 UTC (1708370810) | |
| [ 1.378607] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.385163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.393814] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.400021] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.404432] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.410286] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.416350] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.422824] hid: raw HID events driver (C) Jiri Kosina | |
| [ 1.427998] usbcore: registered new interface driver usbhid | |
| [ 1.433591] usbhid: USB HID core driver | |
| [ 1.437563] NET: Registered PF_PACKET protocol family | |
| [ 1.442654] Key type dns_resolver registered | |
| [ 1.447152] registered taskstats version 1 | |
| [ 1.451278] Loading compiled-in X.509 certificates | |
| [ 1.456209] Key type .fscrypt registered | |
| [ 1.460147] Key type fscrypt-provisioning registered | |
| [ 1.466445] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.473445] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.482539] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.490841] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.499146] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.507448] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.516917] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE | |
| [ 1.525225] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.530241] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.536708] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.542214] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.552784] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.563973] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.570027] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.576492] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.690213] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.696872] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.702914] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.709210] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.715506] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.721864] pci 0000:01:00.0: supports D1 | |
| [ 1.725886] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.742216] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.748865] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.756032] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.763198] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.770365] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 1.777532] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.782514] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.789680] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.798160] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.806693] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.812844] pcieport 0000:00:00.0: PME: Signaling with IRQ 39 | |
| [ 1.818687] pcieport 0000:00:00.0: AER: enabled with IRQ 39 | |
| [ 1.824354] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 1.833442] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 1.842708] rp1 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 1.849303] rp1 0000:01:00.0: chip_id 0x20001927 | |
| [ 1.874352] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:e5:3d:87) | |
| [ 1.885195] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels | |
| [ 1.893754] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.898830] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 1.906535] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 1.915542] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000 | |
| [ 1.921378] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.926448] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 1.933701] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 1.939861] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 1.948163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.955417] usb usb1: Product: xHCI Host Controller | |
| [ 1.960311] usb usb1: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 1.966427] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 1.971004] hub 1-0:1.0: USB hub found | |
| [ 1.974778] hub 1-0:1.0: 2 ports detected | |
| [ 1.978926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 1.987228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.994482] usb usb2: Product: xHCI Host Controller | |
| [ 1.999376] usb usb2: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.005566] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.010163] hub 2-0:1.0: USB hub found | |
| [ 2.013935] hub 2-0:1.0: 1 port detected | |
| [ 2.018136] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.023326] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.031028] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 2.040144] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000 | |
| [ 2.045978] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.051049] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.058412] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.064558] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 2.072859] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.080212] usb usb3: Product: xHCI Host Controller | |
| [ 2.085107] usb usb3: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.091223] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.095859] hub 3-0:1.0: USB hub found | |
| [ 2.099631] hub 3-0:1.0: 2 ports detected | |
| [ 2.103768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 2.112180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.119460] usb usb4: Product: xHCI Host Controller | |
| [ 2.124355] usb usb4: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.130634] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.135188] hub 4-0:1.0: USB hub found | |
| [ 2.138958] hub 4-0:1.0: 1 port detected | |
| [ 2.143506] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.151998] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.160038] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.168200] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.174069] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.182390] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.190605] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.196659] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.204626] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.212691] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.219880] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.228225] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu | |
| [ 2.235634] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu | |
| [ 2.242902] platform axi:gpu: Adding to iommu group 1 | |
| [ 2.248014] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu | |
| [ 2.255214] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.262311] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.270772] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.277611] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default | |
| [ 2.277950] mmc1: CQHCI version 5.10 | |
| [ 2.278359] of_cfs_init | |
| [ 2.278393] of_cfs_init: OK | |
| [ 2.299937] mmc0: CQHCI version 5.10 | |
| [ 2.339309] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.362208] usb 3-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 2.442471] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 | |
| [ 2.449342] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.455313] mmcblk0: p1 p2 | |
| [ 2.458200] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.484749] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.495738] Freeing unused kernel memory: 4480K | |
| [ 2.500345] Run /init as init process | |
| [ 2.504020] with arguments: | |
| [ 2.504022] /init | |
| [ 2.504023] with environment: | |
| [ 2.504024] HOME=/ | |
| [ 2.504025] TERM=linux | |
| [ 2.514375] usb 3-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 | |
| [ 2.522622] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| [ 2.522860] mmc1: new ultra high speed DDR50 SDIO card at address 0001 | |
| [ 2.576702] hub 3-1:1.0: USB hub found | |
| [ 2.580519] hub 3-1:1.0: 7 ports detected | |
| [ 2.798201] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. | |
| [ 2.934212] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd | |
| [ 3.091439] NET: Registered PF_INET6 protocol family | |
| [ 3.096839] Segment Routing with IPv6 | |
| [ 3.100538] In-situ OAM (IOAM) with IPv6 | |
| [ 3.104869] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 3.113268] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.120616] usb 3-1.1: Product: exploreHD USB Camera | |
| [ 3.125602] usb 3-1.1: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.131548] usb 3-1.1: SerialNumber: SN00009 | |
| [ 3.138707] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
| [ 3.171614] systemd[1]: Detected architecture arm64. | |
| [ 3.182231] systemd[1]: Hostname set to <raspberrypi>. | |
| [ 3.266251] usb 3-1.2: new high-speed USB device number 4 using xhci-hcd | |
| [ 3.273139] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 3.436727] systemd[1]: Queued start job for default target multi-user.target. | |
| [ 3.444015] usb 3-1.2: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.452410] usb 3-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.459750] usb 3-1.2: Product: exploreHD USB Camera | |
| [ 3.464732] usb 3-1.2: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.470674] usb 3-1.2: SerialNumber: SN00009 | |
| [ 3.494852] systemd[1]: Created slice system-getty.slice - Slice /system/getty. | |
| [ 3.502600] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. | |
| [ 3.510801] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. | |
| [ 3.519923] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. | |
| [ 3.528951] systemd[1]: Created slice user.slice - User and Session Slice. | |
| [ 3.535983] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. | |
| [ 3.547199] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. | |
| [ 3.557967] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. | |
| [ 3.570618] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-fef29027\x2d01.device - /dev/disk/by-partuuid/fef29027-01... | |
| [ 3.582043] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... | |
| [ 3.589429] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. | |
| [ 3.597172] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. | |
| [ 3.606154] systemd[1]: Reached target paths.target - Path Units. | |
| [ 3.612341] systemd[1]: Reached target slices.target - Slice Units. | |
| [ 3.618688] systemd[1]: Reached target swap.target - Swaps. | |
| [ 3.624341] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. | |
| [ 3.632906] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. | |
| [ 3.638208] usb 3-1.3: new high-speed USB device number 5 using xhci-hcd | |
| [ 3.648488] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. | |
| [ 3.657527] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. | |
| [ 3.666026] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). | |
| [ 3.675121] systemd[1]: Listening on systemd-journald.socket - Journal Socket. | |
| [ 3.683344] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. | |
| [ 3.691628] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
| [ 3.699788] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
| [ 3.738313] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
| [ 3.747322] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... | |
| [ 3.756207] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... | |
| [ 3.764550] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). | |
| [ 3.782430] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... | |
| [ 3.792893] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... | |
| [ 3.802874] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... | |
| [ 3.813270] systemd[1]: Starting [email protected] - Load Kernel Module configfs... | |
| [ 3.822978] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
| [ 3.832484] systemd[1]: Starting [email protected] - Load Kernel Module drm... | |
| [ 3.840794] usb 3-1.3: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.841434] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... | |
| [ 3.849235] usb 3-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.865304] usb 3-1.3: Product: exploreHD USB Camera | |
| [ 3.870310] usb 3-1.3: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.876357] usb 3-1.3: SerialNumber: SN00009 | |
| [ 3.877493] systemd[1]: Starting [email protected] - Load Kernel Module fuse... | |
| [ 3.889858] systemd[1]: Starting [email protected] - Load Kernel Module loop... | |
| [ 3.897761] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
| [ 3.915954] systemd[1]: Starting systemd-journald.service - Journal Service... | |
| [ 3.932117] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... | |
| [ 3.941434] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... | |
| [ 3.952049] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
| [ 3.961068] fuse: init (API version 7.37) | |
| [ 3.962855] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
| [ 3.973095] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. | |
| [ 3.973427] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected] | |
| [ 3.991195] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. | |
| [ 4.000454] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. | |
| [ 4.010244] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. | |
| [ 4.019591] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.022222] usb 3-1.4: new high-speed USB device number 6 using xhci-hcd | |
| [ 4.026952] systemd[1]: Finished [email protected] - Load Kernel Module configfs. | |
| [ 4.042142] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. | |
| [ 4.049265] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
| [ 4.057497] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. | |
| [ 4.064922] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
| [ 4.073857] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.080729] systemd[1]: Finished [email protected] - Load Kernel Module fuse. | |
| [ 4.088700] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.095546] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. | |
| [ 4.095662] systemd[1]: Finished [email protected] - Load Kernel Module loop. | |
| [ 4.110051] systemd[1]: Started systemd-journald.service - Journal Service. | |
| [ 4.163868] systemd-journald[277]: Received client request to flush runtime journal. | |
| [ 4.189340] usb 3-1.4: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.197757] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.197760] usb 3-1.4: Product: exploreHD USB Camera | |
| [ 4.197763] usb 3-1.4: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.197766] usb 3-1.4: SerialNumber: SN00009 | |
| [ 4.326217] usb 3-1.5: new high-speed USB device number 7 using xhci-hcd | |
| [ 4.486793] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.486801] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.486803] usb 3-1.5: Product: exploreHD USB Camera | |
| [ 4.486805] usb 3-1.5: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.486808] usb 3-1.5: SerialNumber: SN00009 | |
| [ 4.606238] usb 3-1.6: new high-speed USB device number 8 using xhci-hcd | |
| [ 4.630057] mc: Linux media interface: v0.10 | |
| [ 4.676134] videodev: Linux video capture interface: v2.00 | |
| [ 4.676577] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 4.679852] input: pwr_button as /devices/platform/pwr_button/input/input0 | |
| [ 4.682302] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 4.682381] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 4.685313] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 4.689753] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 4.690554] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode | |
| [ 4.690713] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode | |
| [ 4.703835] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 4.707377] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 4.723781] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 4.723932] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 4.724201] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 4.738473] usb 3-1.1: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.774679] usb 3-1.6: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.774689] usb 3-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.774692] usb 3-1.6: Product: exploreHD USB Camera | |
| [ 4.774695] usb 3-1.6: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.774697] usb 3-1.6: SerialNumber: SN00009 | |
| [ 4.785091] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input1 | |
| [ 4.786197] usb 3-1.2: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.818715] usb 3-1.6: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.839310] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input2 | |
| [ 4.840623] usb 3-1.3: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.845495] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.6/3-1.6:1.0/input/input3 | |
| [ 4.865360] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input4 | |
| [ 4.866433] usb 3-1.4: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.891142] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input5 | |
| [ 4.892210] usb 3-1.5: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.917068] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.5/3-1.5:1.0/input/input6 | |
| [ 4.917436] usbcore: registered new interface driver uvcvideo | |
| [ 4.919159] Bluetooth: Core ver 2.22 | |
| [ 4.919227] NET: Registered PF_BLUETOOTH protocol family | |
| [ 4.919231] Bluetooth: HCI device and connection manager initialized | |
| [ 4.919242] Bluetooth: HCI socket layer initialized | |
| [ 4.919245] Bluetooth: L2CAP socket layer initialized | |
| [ 4.919256] Bluetooth: SCO socket layer initialized | |
| [ 4.922242] usb 3-1.7: new high-speed USB device number 9 using xhci-hcd | |
| [ 4.959498] Bluetooth: HCI UART driver ver 2.3 | |
| [ 4.959516] Bluetooth: HCI UART protocol H4 registered | |
| [ 4.959586] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
| [ 4.960849] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator | |
| [ 4.961941] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator | |
| [ 4.964318] Bluetooth: HCI UART protocol Broadcom registered | |
| [ 4.973471] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 4.973609] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700 | |
| [ 4.973614] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000 | |
| [ 4.973616] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000 | |
| [ 4.973619] pispbe 1000880000.pisp_be: Register nodes for group 0 | |
| [ 4.973716] pispbe 1000880000.pisp_be: input device node registered as /dev/video24 | |
| [ 4.973763] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video25 | |
| [ 4.973791] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video26 | |
| [ 4.973831] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video27 | |
| [ 4.973858] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video28 | |
| [ 4.973886] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video29 | |
| [ 4.973915] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video30 | |
| [ 4.973943] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video31 | |
| [ 4.973967] pispbe 1000880000.pisp_be: config device node registered as /dev/video32 | |
| [ 4.974393] pispbe 1000880000.pisp_be: Register nodes for group 1 | |
| [ 4.974449] pispbe 1000880000.pisp_be: input device node registered as /dev/video33 | |
| [ 4.974484] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video34 | |
| [ 4.975916] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video35 | |
| [ 4.976623] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video36 | |
| [ 4.976666] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video37 | |
| [ 4.976692] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video38 | |
| [ 4.976734] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video39 | |
| [ 4.976763] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video40 | |
| [ 4.976798] pispbe 1000880000.pisp_be: config device node registered as /dev/video41 | |
| [ 4.982649] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 4.983647] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 5.030766] rpivid 1000800000.codec: Device registered as /dev/video42 | |
| [ 5.094511] usb 3-1.7: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 5.094524] usb 3-1.7: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 5.094527] usb 3-1.7: Product: exploreHD USB Camera | |
| [ 5.094530] usb 3-1.7: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 5.094532] usb 3-1.7: SerialNumber: SN00009 | |
| [ 5.110658] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 5.119769] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' | |
| [ 5.120102] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' | |
| [ 5.120421] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 5.120736] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ 5.138763] usb 3-1.7: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 5.163708] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.7/3-1.7:1.0/input/input7 | |
| [ 5.236351] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 | |
| [ 5.243577] brcmfmac: F1 signature read @0x18000000=0x15264345 | |
| [ 5.245699] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 5.250395] usbcore: registered new interface driver brcmfmac | |
| [ 5.319471] Bluetooth: hci0: BCM: chip id 107 | |
| [ 5.319711] Bluetooth: hci0: BCM: features 0x2f | |
| [ 5.320918] Bluetooth: hci0: BCM4345C0 | |
| [ 5.320930] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 | |
| [ 5.326888] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch | |
| [ 5.358090] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu | |
| [ 5.360692] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) | |
| [ 5.362967] Registered IR keymap rc-cec | |
| [ 5.363028] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 | |
| [ 5.363078] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input8 | |
| [ 5.370985] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.374755] Registered IR keymap rc-cec | |
| [ 5.374835] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 | |
| [ 5.374901] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input9 | |
| [ 5.375906] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.376074] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) | |
| [ 5.378505] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) | |
| [ 5.378647] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.378727] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.379403] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 | |
| [ 5.383521] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.387502] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.391661] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.427102] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 | |
| [ 5.597711] Adding 102368k swap on /var/swap. Priority:-2 extents:1 across:102368k SSFS | |
| [ 6.027163] Bluetooth: hci0: BCM: features 0x2f | |
| [ 6.028520] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 | |
| [ 6.028524] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 | |
| [ 6.028816] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) | |
| [ 6.204061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 6.204069] Bluetooth: BNEP filters: protocol multicast | |
| [ 6.204076] Bluetooth: BNEP socket layer initialized | |
| [ 6.206378] Bluetooth: MGMT ver 1.22 | |
| [ 6.211577] NET: Registered PF_ALG protocol family | |
| [ 6.233323] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 6.233334] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 6.236521] pps pps0: new PPS source ptp0 | |
| [ 6.236577] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 6.267038] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled | |
| [ 10.327252] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 10.327270] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 11.785636] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.1.77-v8-16k+ (kunal@dwe-ubuntu) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Mon Feb 19 10:01:00 PST 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001a000000, size 320 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376 | |
| [ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521984 | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E5:3D:87 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=fef29027-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=US | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) | |
| [ 0.000000] Memory: 7904016K/8384512K available (12352K kernel code, 2184K rwdata, 4096K rodata, 4480K init, 1217K bss, 152816K reserved, 327680K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] ftrace: allocating 40135 entries in 40 pages | |
| [ 0.000000] ftrace: allocated 40 pages with 2 groups | |
| [ 0.000000] trace event string verifier disabled | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Rude variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000148] Console: colour dummy device 80x25 | |
| [ 0.000280] printk: console [tty1] enabled | |
| [ 0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) | |
| [ 0.000303] pid_max: default: 32768 minimum: 301 | |
| [ 0.000324] LSM: Security Framework initializing | |
| [ 0.000383] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000408] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) | |
| [ 0.000754] cgroup: Disabling memory control group subsystem | |
| [ 0.001112] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001119] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001150] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001154] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001176] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.001180] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.001238] rcu: Hierarchical SRCU implementation. | |
| [ 0.001242] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001819] EFI services will not be available. | |
| [ 0.001907] smp: Bringing up secondary CPUs ... | |
| [ 0.002073] Detected PIPT I-cache on CPU1 | |
| [ 0.002120] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002304] Detected PIPT I-cache on CPU2 | |
| [ 0.002339] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002507] Detected PIPT I-cache on CPU3 | |
| [ 0.002539] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002566] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002583] SMP: Total of 4 processors activated. | |
| [ 0.002586] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002589] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002595] CPU features: detected: Common not Private translations | |
| [ 0.002598] CPU features: detected: CRC32 instructions | |
| [ 0.002602] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002605] CPU features: detected: LSE atomic instructions | |
| [ 0.002609] CPU features: detected: Privileged Access Never | |
| [ 0.002612] CPU features: detected: RAS Extension Support | |
| [ 0.002616] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002651] CPU: All CPU(s) started at EL2 | |
| [ 0.002654] alternatives: applying system-wide alternatives | |
| [ 0.004523] devtmpfs: initialized | |
| [ 0.007071] Enabled cp15_barrier support | |
| [ 0.007081] Enabled setend support | |
| [ 0.007136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.007145] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) | |
| [ 0.008048] pinctrl core: initialized pinctrl subsystem | |
| [ 0.008239] DMI not present or invalid. | |
| [ 0.008440] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.009003] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.009052] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.009103] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.009129] audit: initializing netlink subsys (disabled) | |
| [ 0.009182] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.009294] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.009304] cpuidle: using governor menu | |
| [ 0.009378] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.009409] ASID allocator initialised with 32768 entries | |
| [ 0.009708] Serial: AMBA PL011 UART driver | |
| [ 0.010532] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.010805] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.730588] printk: console [ttyAMA10] enabled | |
| [ 0.743055] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd | |
| [ 0.757109] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000 | |
| [ 0.772549] KASLR enabled | |
| [ 0.787294] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.794914] iommu: Default domain type: Translated | |
| [ 0.799812] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.806191] SCSI subsystem initialized | |
| [ 0.809995] usbcore: registered new interface driver usbfs | |
| [ 0.815508] usbcore: registered new interface driver hub | |
| [ 0.820843] usbcore: registered new device driver usb | |
| [ 0.825948] usb_phy_generic phy: supply vcc not found, using dummy regulator | |
| [ 0.833089] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.838071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.847248] PTP clock support registered | |
| [ 0.851387] vgaarb: loaded | |
| [ 0.854206] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.860428] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.864374] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) | |
| [ 0.871473] FS-Cache: Loaded | |
| [ 0.874385] CacheFiles: Loaded | |
| [ 0.878854] NET: Registered PF_INET protocol family | |
| [ 0.883902] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) | |
| [ 0.893852] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) | |
| [ 0.902458] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) | |
| [ 0.910237] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) | |
| [ 0.918455] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) | |
| [ 0.927708] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.934411] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) | |
| [ 0.942043] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.948955] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) | |
| [ 0.956360] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.962172] RPC: Registered named UNIX socket transport module. | |
| [ 0.968119] RPC: Registered udp transport module. | |
| [ 0.972837] RPC: Registered tcp transport module. | |
| [ 0.977556] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.984028] PCI: CLS 0 bytes, default 64 | |
| [ 0.988118] Trying to unpack rootfs image as initramfs... | |
| [ 0.998593] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available | |
| [ 1.006952] kvm [1]: IPA Size Limit: 40 bits | |
| [ 1.011259] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) | |
| [ 1.020072] kvm [1]: vgic interrupt IRQ9 | |
| [ 1.024060] kvm [1]: VHE mode initialized successfully | |
| [ 1.077848] Initialise system trusted keyrings | |
| [ 1.082416] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
| [ 1.090781] zbud: loaded | |
| [ 1.093892] NFS: Registering the id_resolver key type | |
| [ 1.098983] Key type id_resolver registered | |
| [ 1.103184] Key type id_legacy registered | |
| [ 1.107237] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.113974] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 1.121487] F2FS not supported on PAGE_SIZE(16384) != 4096 | |
| [ 1.127081] Key type asymmetric registered | |
| [ 1.131194] Asymmetric key parser 'x509' registered | |
| [ 1.136126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 1.143613] io scheduler mq-deadline registered | |
| [ 1.148173] io scheduler kyber registered | |
| [ 1.152681] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31) | |
| [ 1.161887] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32) | |
| [ 1.168448] Freeing initrd memory: 10848K | |
| [ 1.169666] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33) | |
| [ 1.181339] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34) | |
| [ 1.189069] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35) | |
| [ 1.198196] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36) | |
| [ 1.206802] gpio-461 (RP1 RUN pin): hogged as output/high | |
| [ 1.244728] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.251308] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A | |
| [ 1.260603] serial serial0: tty port ttyS0 registered | |
| [ 1.265967] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.271438] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.279949] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.288769] brd: module loaded | |
| [ 1.293050] loop: module loaded | |
| [ 1.296318] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.303715] Loading iSCSI transport class v2.0-870. | |
| [ 1.309334] usbcore: registered new device driver r8152-cfgselector | |
| [ 1.315640] usbcore: registered new interface driver r8152 | |
| [ 1.321156] usbcore: registered new interface driver lan78xx | |
| [ 1.326845] usbcore: registered new interface driver smsc95xx | |
| [ 1.332697] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.338484] dwc_otg: FIQ enabled | |
| [ 1.338485] dwc_otg: NAK holdoff enabled | |
| [ 1.338486] dwc_otg: FIQ split-transaction FSM enabled | |
| [ 1.338489] Module dwc_common_port init | |
| [ 1.338614] usbcore: registered new interface driver uas | |
| [ 1.343954] usbcore: registered new interface driver usb-storage | |
| [ 1.350061] mousedev: PS/2 mouse device common for all mice | |
| [ 1.363375] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.369730] rpi-rtc soc:rpi_rtc: setting system clock to 2024-02-19T19:26:50 UTC (1708370810) | |
| [ 1.378607] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.385163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.393814] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.400021] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.404432] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.410286] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.416350] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.422824] hid: raw HID events driver (C) Jiri Kosina | |
| [ 1.427998] usbcore: registered new interface driver usbhid | |
| [ 1.433591] usbhid: USB HID core driver | |
| [ 1.437563] NET: Registered PF_PACKET protocol family | |
| [ 1.442654] Key type dns_resolver registered | |
| [ 1.447152] registered taskstats version 1 | |
| [ 1.451278] Loading compiled-in X.509 certificates | |
| [ 1.456209] Key type .fscrypt registered | |
| [ 1.460147] Key type fscrypt-provisioning registered | |
| [ 1.466445] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.473445] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.482539] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.490841] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.499146] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.507448] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.516917] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE | |
| [ 1.525225] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.530241] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.536708] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.542214] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.552784] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.563973] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.570027] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.576492] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.690213] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.696872] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.702914] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.709210] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.715506] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.721864] pci 0000:01:00.0: supports D1 | |
| [ 1.725886] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.742216] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.748865] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.756032] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.763198] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.770365] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 1.777532] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.782514] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.789680] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.798160] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.806693] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.812844] pcieport 0000:00:00.0: PME: Signaling with IRQ 39 | |
| [ 1.818687] pcieport 0000:00:00.0: AER: enabled with IRQ 39 | |
| [ 1.824354] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 1.833442] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 1.842708] rp1 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 1.849303] rp1 0000:01:00.0: chip_id 0x20001927 | |
| [ 1.874352] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:e5:3d:87) | |
| [ 1.885195] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels | |
| [ 1.893754] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.898830] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 1.906535] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 1.915542] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000 | |
| [ 1.921378] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 1.926448] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 1.933701] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 1.939861] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 1.948163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.955417] usb usb1: Product: xHCI Host Controller | |
| [ 1.960311] usb usb1: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 1.966427] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 1.971004] hub 1-0:1.0: USB hub found | |
| [ 1.974778] hub 1-0:1.0: 2 ports detected | |
| [ 1.978926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 1.987228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.994482] usb usb2: Product: xHCI Host Controller | |
| [ 1.999376] usb usb2: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.005566] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.010163] hub 2-0:1.0: USB hub found | |
| [ 2.013935] hub 2-0:1.0: 1 port detected | |
| [ 2.018136] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.023326] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.031028] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 | |
| [ 2.040144] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000 | |
| [ 2.045978] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.051049] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.058412] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.064558] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 | |
| [ 2.072859] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.080212] usb usb3: Product: xHCI Host Controller | |
| [ 2.085107] usb usb3: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.091223] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.095859] hub 3-0:1.0: USB hub found | |
| [ 2.099631] hub 3-0:1.0: 2 ports detected | |
| [ 2.103768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 | |
| [ 2.112180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.119460] usb usb4: Product: xHCI Host Controller | |
| [ 2.124355] usb usb4: Manufacturer: Linux 6.1.77-v8-16k+ xhci-hcd | |
| [ 2.130634] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.135188] hub 4-0:1.0: USB hub found | |
| [ 2.138958] hub 4-0:1.0: 1 port detected | |
| [ 2.143506] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.151998] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.160038] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.168200] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.174069] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.182390] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.190605] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.196659] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.204626] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.212691] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.219880] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.228225] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu | |
| [ 2.235634] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu | |
| [ 2.242902] platform axi:gpu: Adding to iommu group 1 | |
| [ 2.248014] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu | |
| [ 2.255214] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.262311] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.270772] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.277611] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default | |
| [ 2.277950] mmc1: CQHCI version 5.10 | |
| [ 2.278359] of_cfs_init | |
| [ 2.278393] of_cfs_init: OK | |
| [ 2.299937] mmc0: CQHCI version 5.10 | |
| [ 2.339309] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.362208] usb 3-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 2.442471] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 | |
| [ 2.449342] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.455313] mmcblk0: p1 p2 | |
| [ 2.458200] mmcblk0: mmc0:59b4 USD00 58.9 GiB | |
| [ 2.484749] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.495738] Freeing unused kernel memory: 4480K | |
| [ 2.500345] Run /init as init process | |
| [ 2.504020] with arguments: | |
| [ 2.504022] /init | |
| [ 2.504023] with environment: | |
| [ 2.504024] HOME=/ | |
| [ 2.504025] TERM=linux | |
| [ 2.514375] usb 3-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 | |
| [ 2.522622] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| [ 2.522860] mmc1: new ultra high speed DDR50 SDIO card at address 0001 | |
| [ 2.576702] hub 3-1:1.0: USB hub found | |
| [ 2.580519] hub 3-1:1.0: 7 ports detected | |
| [ 2.798201] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. | |
| [ 2.934212] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd | |
| [ 3.091439] NET: Registered PF_INET6 protocol family | |
| [ 3.096839] Segment Routing with IPv6 | |
| [ 3.100538] In-situ OAM (IOAM) with IPv6 | |
| [ 3.104869] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 3.113268] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.120616] usb 3-1.1: Product: exploreHD USB Camera | |
| [ 3.125602] usb 3-1.1: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.131548] usb 3-1.1: SerialNumber: SN00009 | |
| [ 3.138707] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
| [ 3.171614] systemd[1]: Detected architecture arm64. | |
| [ 3.182231] systemd[1]: Hostname set to <raspberrypi>. | |
| [ 3.266251] usb 3-1.2: new high-speed USB device number 4 using xhci-hcd | |
| [ 3.273139] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 3.436727] systemd[1]: Queued start job for default target multi-user.target. | |
| [ 3.444015] usb 3-1.2: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.452410] usb 3-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.459750] usb 3-1.2: Product: exploreHD USB Camera | |
| [ 3.464732] usb 3-1.2: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.470674] usb 3-1.2: SerialNumber: SN00009 | |
| [ 3.494852] systemd[1]: Created slice system-getty.slice - Slice /system/getty. | |
| [ 3.502600] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. | |
| [ 3.510801] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. | |
| [ 3.519923] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. | |
| [ 3.528951] systemd[1]: Created slice user.slice - User and Session Slice. | |
| [ 3.535983] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. | |
| [ 3.547199] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. | |
| [ 3.557967] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. | |
| [ 3.570618] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-fef29027\x2d01.device - /dev/disk/by-partuuid/fef29027-01... | |
| [ 3.582043] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... | |
| [ 3.589429] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. | |
| [ 3.597172] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. | |
| [ 3.606154] systemd[1]: Reached target paths.target - Path Units. | |
| [ 3.612341] systemd[1]: Reached target slices.target - Slice Units. | |
| [ 3.618688] systemd[1]: Reached target swap.target - Swaps. | |
| [ 3.624341] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. | |
| [ 3.632906] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. | |
| [ 3.638208] usb 3-1.3: new high-speed USB device number 5 using xhci-hcd | |
| [ 3.648488] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. | |
| [ 3.657527] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. | |
| [ 3.666026] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). | |
| [ 3.675121] systemd[1]: Listening on systemd-journald.socket - Journal Socket. | |
| [ 3.683344] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. | |
| [ 3.691628] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
| [ 3.699788] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
| [ 3.738313] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
| [ 3.747322] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... | |
| [ 3.756207] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... | |
| [ 3.764550] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). | |
| [ 3.782430] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... | |
| [ 3.792893] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... | |
| [ 3.802874] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... | |
| [ 3.813270] systemd[1]: Starting [email protected] - Load Kernel Module configfs... | |
| [ 3.822978] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
| [ 3.832484] systemd[1]: Starting [email protected] - Load Kernel Module drm... | |
| [ 3.840794] usb 3-1.3: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 3.841434] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... | |
| [ 3.849235] usb 3-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 3.865304] usb 3-1.3: Product: exploreHD USB Camera | |
| [ 3.870310] usb 3-1.3: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 3.876357] usb 3-1.3: SerialNumber: SN00009 | |
| [ 3.877493] systemd[1]: Starting [email protected] - Load Kernel Module fuse... | |
| [ 3.889858] systemd[1]: Starting [email protected] - Load Kernel Module loop... | |
| [ 3.897761] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
| [ 3.915954] systemd[1]: Starting systemd-journald.service - Journal Service... | |
| [ 3.932117] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... | |
| [ 3.941434] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... | |
| [ 3.952049] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
| [ 3.961068] fuse: init (API version 7.37) | |
| [ 3.962855] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
| [ 3.973095] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. | |
| [ 3.973427] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected] | |
| [ 3.991195] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. | |
| [ 4.000454] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. | |
| [ 4.010244] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. | |
| [ 4.019591] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.022222] usb 3-1.4: new high-speed USB device number 6 using xhci-hcd | |
| [ 4.026952] systemd[1]: Finished [email protected] - Load Kernel Module configfs. | |
| [ 4.042142] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. | |
| [ 4.049265] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
| [ 4.057497] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. | |
| [ 4.064922] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
| [ 4.073857] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.080729] systemd[1]: Finished [email protected] - Load Kernel Module fuse. | |
| [ 4.088700] systemd[1]: [email protected]: Deactivated successfully. | |
| [ 4.095546] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. | |
| [ 4.095662] systemd[1]: Finished [email protected] - Load Kernel Module loop. | |
| [ 4.110051] systemd[1]: Started systemd-journald.service - Journal Service. | |
| [ 4.163868] systemd-journald[277]: Received client request to flush runtime journal. | |
| [ 4.189340] usb 3-1.4: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.197757] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.197760] usb 3-1.4: Product: exploreHD USB Camera | |
| [ 4.197763] usb 3-1.4: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.197766] usb 3-1.4: SerialNumber: SN00009 | |
| [ 4.326217] usb 3-1.5: new high-speed USB device number 7 using xhci-hcd | |
| [ 4.486793] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.486801] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.486803] usb 3-1.5: Product: exploreHD USB Camera | |
| [ 4.486805] usb 3-1.5: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.486808] usb 3-1.5: SerialNumber: SN00009 | |
| [ 4.606238] usb 3-1.6: new high-speed USB device number 8 using xhci-hcd | |
| [ 4.630057] mc: Linux media interface: v0.10 | |
| [ 4.676134] videodev: Linux video capture interface: v2.00 | |
| [ 4.676577] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 4.679852] input: pwr_button as /devices/platform/pwr_button/input/input0 | |
| [ 4.682302] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 4.682381] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 4.685313] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 4.689753] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 4.690554] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode | |
| [ 4.690713] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode | |
| [ 4.703835] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 4.707377] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 4.723781] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 4.723932] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 4.724201] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 4.738473] usb 3-1.1: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.774679] usb 3-1.6: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.01 | |
| [ 4.774689] usb 3-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 4.774692] usb 3-1.6: Product: exploreHD USB Camera | |
| [ 4.774695] usb 3-1.6: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 4.774697] usb 3-1.6: SerialNumber: SN00009 | |
| [ 4.785091] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input1 | |
| [ 4.786197] usb 3-1.2: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.818715] usb 3-1.6: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.839310] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input2 | |
| [ 4.840623] usb 3-1.3: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.845495] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.6/3-1.6:1.0/input/input3 | |
| [ 4.865360] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input4 | |
| [ 4.866433] usb 3-1.4: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.891142] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input5 | |
| [ 4.892210] usb 3-1.5: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 4.917068] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.5/3-1.5:1.0/input/input6 | |
| [ 4.917436] usbcore: registered new interface driver uvcvideo | |
| [ 4.919159] Bluetooth: Core ver 2.22 | |
| [ 4.919227] NET: Registered PF_BLUETOOTH protocol family | |
| [ 4.919231] Bluetooth: HCI device and connection manager initialized | |
| [ 4.919242] Bluetooth: HCI socket layer initialized | |
| [ 4.919245] Bluetooth: L2CAP socket layer initialized | |
| [ 4.919256] Bluetooth: SCO socket layer initialized | |
| [ 4.922242] usb 3-1.7: new high-speed USB device number 9 using xhci-hcd | |
| [ 4.959498] Bluetooth: HCI UART driver ver 2.3 | |
| [ 4.959516] Bluetooth: HCI UART protocol H4 registered | |
| [ 4.959586] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
| [ 4.960849] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator | |
| [ 4.961941] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator | |
| [ 4.964318] Bluetooth: HCI UART protocol Broadcom registered | |
| [ 4.973471] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 4.973609] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700 | |
| [ 4.973614] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000 | |
| [ 4.973616] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000 | |
| [ 4.973619] pispbe 1000880000.pisp_be: Register nodes for group 0 | |
| [ 4.973716] pispbe 1000880000.pisp_be: input device node registered as /dev/video24 | |
| [ 4.973763] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video25 | |
| [ 4.973791] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video26 | |
| [ 4.973831] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video27 | |
| [ 4.973858] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video28 | |
| [ 4.973886] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video29 | |
| [ 4.973915] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video30 | |
| [ 4.973943] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video31 | |
| [ 4.973967] pispbe 1000880000.pisp_be: config device node registered as /dev/video32 | |
| [ 4.974393] pispbe 1000880000.pisp_be: Register nodes for group 1 | |
| [ 4.974449] pispbe 1000880000.pisp_be: input device node registered as /dev/video33 | |
| [ 4.974484] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video34 | |
| [ 4.975916] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video35 | |
| [ 4.976623] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video36 | |
| [ 4.976666] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video37 | |
| [ 4.976692] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video38 | |
| [ 4.976734] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video39 | |
| [ 4.976763] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video40 | |
| [ 4.976798] pispbe 1000880000.pisp_be: config device node registered as /dev/video41 | |
| [ 4.982649] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 4.983647] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu | |
| [ 5.030766] rpivid 1000800000.codec: Device registered as /dev/video42 | |
| [ 5.094511] usb 3-1.7: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 | |
| [ 5.094524] usb 3-1.7: New USB device strings: Mfr=2, Product=1, SerialNumber=3 | |
| [ 5.094527] usb 3-1.7: Product: exploreHD USB Camera | |
| [ 5.094530] usb 3-1.7: Manufacturer: Sonix Technology Co., Ltd. | |
| [ 5.094532] usb 3-1.7: SerialNumber: SN00009 | |
| [ 5.110658] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 5.119769] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' | |
| [ 5.120102] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' | |
| [ 5.120421] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 5.120736] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ 5.138763] usb 3-1.7: Found UVC 1.00 device exploreHD USB Camera (0c45:6366) | |
| [ 5.163708] input: exploreHD USB Camera: exploreHD as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1.7/3-1.7:1.0/input/input7 | |
| [ 5.236351] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 | |
| [ 5.243577] brcmfmac: F1 signature read @0x18000000=0x15264345 | |
| [ 5.245699] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 5.250395] usbcore: registered new interface driver brcmfmac | |
| [ 5.319471] Bluetooth: hci0: BCM: chip id 107 | |
| [ 5.319711] Bluetooth: hci0: BCM: features 0x2f | |
| [ 5.320918] Bluetooth: hci0: BCM4345C0 | |
| [ 5.320930] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 | |
| [ 5.326888] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch | |
| [ 5.358090] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu | |
| [ 5.360692] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) | |
| [ 5.362967] Registered IR keymap rc-cec | |
| [ 5.363028] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 | |
| [ 5.363078] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input8 | |
| [ 5.370985] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.374755] Registered IR keymap rc-cec | |
| [ 5.374835] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 | |
| [ 5.374901] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input9 | |
| [ 5.375906] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) | |
| [ 5.376074] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) | |
| [ 5.378505] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) | |
| [ 5.378647] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.378727] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) | |
| [ 5.379403] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 | |
| [ 5.383521] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.387502] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.391661] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes | |
| [ 5.427102] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 | |
| [ 5.597711] Adding 102368k swap on /var/swap. Priority:-2 extents:1 across:102368k SSFS | |
| [ 6.027163] Bluetooth: hci0: BCM: features 0x2f | |
| [ 6.028520] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 | |
| [ 6.028524] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 | |
| [ 6.028816] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) | |
| [ 6.204061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 6.204069] Bluetooth: BNEP filters: protocol multicast | |
| [ 6.204076] Bluetooth: BNEP socket layer initialized | |
| [ 6.206378] Bluetooth: MGMT ver 1.22 | |
| [ 6.211577] NET: Registered PF_ALG protocol family | |
| [ 6.233323] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 6.233334] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 6.236521] pps pps0: new PPS source ptp0 | |
| [ 6.236577] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 6.267038] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled | |
| [ 10.327252] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 10.327270] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 11.785636] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment