test.ino

#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();

int  emit(int value=1008,int protocol=6,int wordlen=12)
{
  

    String must_send =  intToBinaryWord(value,wordlen);
    
    mySwitch.send(must_send.c_str());
  
    Serial.print("Protocol : ");
    Serial.print( protocol );
    Serial.print( " Emited value: " );
    Serial.print( value );
    Serial.print( " = " );
    Serial.println( must_send.c_str() );
    
    return 1;
}
String intToBinaryWord(int num,int bitsCount)
{
char str[ bitsCount + 1 ];

int i = 0;
while ( bitsCount-- )
    str[ i++ ] = bitRead( num, bitsCount ) + '0';
str[ i ] = '\0';
return str;
}
void setup() {
  
  Serial.begin(9600);
  mySwitch.enableReceive(0); // That is pin #2
  
  mySwitch.enableTransmit(10); // Pin 10
  
   mySwitch.setPulseLength(433); // MHZ
   mySwitch.setRepeatTransmit(5); //Repeat number
  Serial.println("Device Online !");
  emit(1008,6);
}
void loop() {
  if (mySwitch.available()) {
    
    Serial.print( mySwitch.getReceivedValue() );
    Serial.print(" / ");
    Serial.print( mySwitch.getReceivedBitlength() );
    Serial.print("bit ");
    Serial.print("Protocol: ");
    Serial.print(mySwitch.getReceivedProtocol());


    Serial.print(" Pulse lenght: ");
    Serial.print(mySwitch.getReceivedDelay());
    
//    Serial.print("Raw Data: ");
//    Serial.print(mySwitch.getReceivedRawdata());
    Serial.println();
    mySwitch.resetAvailable();
  }
}