GnuPG agent forwarding

GNUPG_agent_forwarding.md

Forward GnuPG agent from macOS to Linux

On the remote machine

Run gpg once as your to create the directory structure

gpg --list-keys

For headless systemd based hosts

Disable gpg-agent startup via systemd by masking the sockets:

sudo systemctl --global mask gpg-agent.service gpg-agent.socket gpg-agent-ssh.socket gpg-agent-extra.socket gpg-agent-browser.socket
killall gpg-agent

For interactive systemd hosts

If you want to maintain the auto start and stop of gpg-agent on the host you need to do the following:

Edit /etc/ssh/sshd_config to include the line:

StreamLocalBindUnlink yes

Add this line to your user's $HOME/.bashrc:

gpgconf --create-socketdir

On the local machine

Add this line to the file: $HOME/.gnupg/gpg-agent.conf

extra-socket $HOME/.gnupg/S.gpg-agent.extra

Reload your current gpg-agent:

gpg-connect-agent reloadagent /bye

Edit $HOME/.ssh/config to forward the gpg-agent socket. Note this doesn't support ssh config variables so you need to use the full path.

Forwarding from macOS to Linux:

host gpgtunnel
    hostname remotehost.example.com
    User yourusername
    RemoteForward /home/<user>/.gnupg/S.gpg-agent /Users/<user>/.gnupg/S.gpg-agent.extra

Forwarding from macOS to systemd based Linux, use id -u on the remote system to find your UID:

host gpgtunnel
    hostname systemd-host.example.com
    User yourusername
    RemoteForward /run/user/<remote UID>/gnupg/S.gpg-agent /Users/<user>/.gnupg/S.gpg-agent.extra

Copy the public half of your keys to the remote machine:

scp $HOME/.gnupg/pubring.gpg gpgtunnel:$HOME/.gnupg/

You only have to copy the public half of the private key you are going to use, if you have that handy you can just copy it over and then use gpg --import mypublickey.pub

Now test that the gpg-agent works on the local machine:

echo "test" | gpg --encrypt -r $MYKEYID 
echo "test" | gpg --encrypt -r $MYKEYID > output
gpg --decrypt output

Now ssh to remote machine

scp output gpgtunnel:
ssh gpgtunnel
gpg --decrypt output

The gpg-agent should be able to use your authentication on the local machine.

References

• https://www.grepular.com/GPG_Agent_Forwarding
• https://wiki.gnupg.org/AgentForwarding

I got it to work between OSX 11.5 and ubuntu 18.04. gpg && gpg-agent 2.3.2 (remote: 2.2.4)
The , should be replaced by the actual values.

On OSX, the pinentry-mac should be installed
Disclaimer: its possibly not the minimal requited configuration, I could not change the StreamLocalBindUnlink of the the remote system. So systemd part might not be needed.

Local configuration:

GPG agent:~/.gnupg/gpg-agent.conf

allow-loopback-pinentry
extra-socket /Users/<user>/.gnupg/S.gpg-agent.extra
pinentry-program /usr/local/bin/pinentry-mac

ssh (~/.ssh/config)

Host remote-host
   Hostname remote-host.donain.org
   RemoteForward /run/user/<uid>/gnupg/S.gpg-agent /Users/<user>/.gnupg/S.gpg-agent.extra

Remote configuration:

Remote gpg: ~/.gnupg/gpg.conf

use-agent
default-key <public key>

No interference from systemd.
I am not sure if its needed or has any effect.

systemctl --user disable gpg-agent-browser.socket gpg-agent-extra.socket gpg-agent-ssh.socket gpg-agent.socket
mkdir -p ~/.config/systemd/user/
cd ~/.config/systemd/user/
ln -s /dev/null gpg-agent-browser.socket 
ln -s /dev/null gpg-agent-extra.socket
ln -s /dev/null gpg-agent.socket
ln -s /dev/null gpg-agent-ssh.socket
systemctl --user daemon-reload

Initialize gpg

gpg --list-keys

Export public key from local machine to remote machine

On local machine: Export public key to remote host
gpg --export -a Public-key | ssh remote-host 'gpg --import -'

Verification

On remote machine:

gpg --decrypt output

That should prompt the pin entry on the local machine

Worked between 2 aarch64 Raspberry PIs running Debian GNU/Linux 12 (bookworm) with the following caveats:

• GPG was not setup on local host laptop.
• Host with gpg-agent (key-host) was accessed via SSH with secure display forwarding ssh -Y from laptop
• Remote Host git-dev-host was accessed using ssh from key-host.
• pinentry alternative was set to pinentry-fltk as default pinentry-curses doesn't mix well with remote execution.
• After complete configuration, both key-host and git-dev-host were restarted to get clean startup state.

The use case was to sign git commits on git-dev-host using the keys in key-host but accessed from the laptop.

I started with https://wiki.archlinux.org/title/GnuPG and used this gist when troubleshooting my issues.

NOTE: pinentry will always run on the machine where gpg-agent is running, so gpg's tty selection settings need to be set before sshing to the remote host:

me@key-host:~$ export GPG_TTY=$(tty)
me@key-host:~$ gpg-connect-agent updatestartuptty /bye
$ ssh -A me@git-dev-host

Ref. https://lists.gnutls.org/pipermail/gnupg-users/2020-November/064293.html

Is it possible to forward gpg agent from local windows machine to remote linux server?

Is it possible to forward gpg agent from local windows machine to remote linux server?

No idea I've not used a Windows system in a long time