Skip to content

Instantly share code, notes, and snippets.

@TobleMiner

TobleMiner/smartctl

Created February 6, 2017 17:12
Show Gist options
  • Save TobleMiner/1a349ac9fed8920d5a34f5d138912fa8 to your computer and use it in GitHub Desktop.
Save TobleMiner/1a349ac9fed8920d5a34f5d138912fa8 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
smartctl
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD20EFRX-68AX9N0
Serial Number: WD-WMC301016388
LU WWN Device Id: 5 0014ee 058db411f
Firmware Version: 80.00A80
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Feb 6 18:11:53 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 266) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 97
3 Spin_Up_Time POS--K 164 164 021 - 4775
4 Start_Stop_Count -O--CK 100 100 000 - 24
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1087
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 24
192 Power-Off_Retract_Count -O--CK 200 200 000 - 21
193 Load_Cycle_Count -O--CK 200 200 000 - 2
194 Temperature_Celsius -O---K 120 108 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 82 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 82 [9] occurred at disk power-on lifetime: 950 hours (39 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 86 24 58 e0 00 Error: UNC at LBA = 0x00862458 = 8791128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 00 86 24 58 e0 08 07:27:10.249 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 07:26:47.583 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 06 00 08 07:26:47.582 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 01 00 08 07:26:47.577 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 00 00 08 07:26:47.576 SMART READ LOG
Error 81 [8] occurred at disk power-on lifetime: 950 hours (39 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 86 24 58 e0 00 Error: UNC at LBA = 0x00862458 = 8791128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 00 86 24 58 e0 08 07:25:08.102 READ SECTOR(S)
20 00 00 00 01 00 00 00 86 24 57 e0 08 07:25:03.762 READ SECTOR(S)
ef 00 10 00 02 00 00 00 00 00 00 a0 08 07:24:21.356 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 07:24:21.356 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 07:24:21.355 IDENTIFY DEVICE
Error 80 [7] occurred at disk power-on lifetime: 950 hours (39 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 86 24 59 e0 00 Error: UNC at LBA = 0x00862459 = 8791129
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 00 86 24 59 e0 08 07:24:18.592 READ SECTOR(S)
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:56.487 FLUSH CACHE EXT
ca 00 00 00 01 00 00 00 86 20 08 e0 08 07:23:56.487 WRITE DMA
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:56.487 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:56.458 FLUSH CACHE EXT
Error 79 [6] occurred at disk power-on lifetime: 950 hours (39 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 86 24 59 e0 00 Error: UNC at LBA = 0x00862459 = 8791129
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 00 86 24 59 e0 08 07:23:18.056 READ SECTOR(S)
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:14.796 FLUSH CACHE EXT
ca 00 00 00 08 00 00 00 86 20 10 e0 08 07:23:14.796 WRITE DMA
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:14.796 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:23:14.773 FLUSH CACHE EXT
Error 78 [5] occurred at disk power-on lifetime: 950 hours (39 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 86 24 58 e0 00 Error: UNC at LBA = 0x00862458 = 8791128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 00 86 24 58 e0 08 07:21:30.522 READ SECTOR(S)
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:21:26.893 FLUSH CACHE EXT
ca 00 00 00 08 00 00 00 86 20 10 e0 08 07:21:26.892 WRITE DMA
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:21:26.831 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 e0 08 07:21:16.842 FLUSH CACHE EXT
Error 77 [4] occurred at disk power-on lifetime: 944 hours (39 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 86 20 0c e0 00 Error: UNC 8 sectors at LBA = 0x0086200c = 8790028
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 86 20 08 e0 08 01:15:27.523 READ DMA
ef 00 10 00 02 00 00 00 00 00 00 a0 08 01:15:27.522 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 01:15:27.522 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 01:15:27.521 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 01:15:27.521 SET FEATURES [Set transfer mode]
Error 76 [3] occurred at disk power-on lifetime: 944 hours (39 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 86 20 0c e0 00 Error: UNC 8 sectors at LBA = 0x0086200c = 8790028
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 86 20 08 e0 08 01:15:27.445 READ DMA
ef 00 10 00 02 00 00 00 00 00 00 a0 08 01:15:27.445 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 01:15:27.445 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 01:15:27.444 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 01:15:27.444 SET FEATURES [Set transfer mode]
Error 75 [2] occurred at disk power-on lifetime: 944 hours (39 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 86 20 0c e0 00 Error: UNC 8 sectors at LBA = 0x0086200c = 8790028
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 86 20 08 e0 08 01:15:27.382 READ DMA
ea 00 00 00 00 00 00 00 00 00 00 e0 08 01:15:27.372 FLUSH CACHE EXT
ca 00 00 00 08 00 00 00 86 20 10 e0 08 01:15:27.371 WRITE DMA
ea 00 00 00 00 00 00 00 00 00 00 e0 08 01:15:27.282 FLUSH CACHE EXT
ca 00 00 00 01 00 00 00 86 20 10 e0 08 01:15:27.282 WRITE DMA
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 960 -
# 2 Extended offline Completed: read failure 90% 950 8791128
# 3 Extended offline Completed: read failure 90% 950 8791128
# 4 Extended offline Completed: read failure 90% 944 8790025
3 of 3 failed self-tests are outdated by newer successful extended offline self-test # 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 22/30 Celsius
Lifetime Min/Max Temperature: 19/39 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (287)
Index Estimated Time Temperature Celsius
288 2017-02-06 10:14 27 ********
... ..(476 skipped). .. ********
287 2017-02-06 18:11 27 ********
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 521213 Vendor specific
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment