TonsOfFun

TonsOfFun

# USAGE
# python save_key_events.py --output output

# import the necessary packages
from greenthumb.note import Note
from uuid import getnode as get_mac
from io import BytesIO
from picamera import PiCamera
import datetime
import imutils

TonsOfFun

#include <Wire.h>
#include <Adafruit_AM2315.h>

/*************************************************** 
  This is an example for the AM2315 Humidity + Temp sensor

  Designed specifically to work with the Adafruit BMP085 Breakout 
  ----> https://www.adafruit.com/products/1293

  These displays use I2C to communicate, 2 pins are required to  

TonsOfFun

import numpy as np
import imutils
import cv2
import matplotlib.pyplot as plt
%matplotlib inline  

# Defined bounds using https://github.com/jrosebr1/imutils/blob/master/bin/range-detector
leaf_lower = (29, 0, 0)
leaf_upper = (255, 255, 128)

TonsOfFun

#include <Wire.h>
#include <Adafruit_AM2315.h>

/*************************************************** 
  This is an example for the AM2315 Humidity + Temp sensor
  Designed specifically to work with the Adafruit BMP085 Breakout 
  ----> https://www.adafruit.com/products/1293
  These displays use I2C to communicate, 2 pins are required to  
  interface
  Adafruit invests time and resources providing this open source code, 

TonsOfFun

#include <Wire.h>
#include <Adafruit_AM2315.h>

/*************************************************** 
  This is an example for the AM2315 Humidity + Temp sensor

  Designed specifically to work with the Adafruit BMP085 Breakout 
  ----> https://www.adafruit.com/products/1293

  These displays use I2C to communicate, 2 pins are required to  

TonsOfFun

//**THIS CODE WILL WORK ON ANY ARDUINO**
//This code was written to be easy to understand.
//Modify this code as you see fit.
//This code will output data to the Arduino serial monitor.
//Type commands into the Arduino serial monitor to control the pH circuit.

//An Arduino UNO was used to test this code.
//This code was written in the Arduino 1.8.5 IDE
//This code was last tested 1/2018

TonsOfFun

import serial
from serial.tools import list_ports
ser = serial.Serial(list_ports.comports()[1].device, 9600)
while True:
  print(ser.readline())

TonsOfFun

import os
import time

def run_pump(id=1, duration=0):
  relay_on(id)
  time.sleep(duration)
  relay_off(id)

def relay_on(id=1):
  os.system('usbrelay 5291D_'+str(id)+'=1')