Moved to https://github.com/fjahr/debugging_bitcoin to allow for better collaboration.
This document is currently optimized for MacOS. If you would like to help me add Linux equivalent commands, please let me know.
This guide is designed to give beginners of C++ development and/or people new to the bitcoin core code base an overview of the tools available for debugging issues as well as giving hints where issues may trip you up.
First of all, debugging involves a lot of compiling, so you definitely want to
speed it up as much as possible. I recommend looking at the general productivity notes in
the bitcoin core docs and install ccache and optimize your configuration.
Also do not forget the disable optimizations using the -O0 flag, otherwise
debugging will be impossible as symbol names will not be recognizable.
An example of configure flags: ./configure CXXFLAGS="-O0 -g" CFLAGS="-O0 -g"
Also note this guide is using lldb instead of gdb because I am running MacOS.
For Linux users gdb seems to be the standard and even if you are using gdb the
guide should still work for you, as the tools are very similar.
Are you in the right spot?
- Mainnet/Testnet/Regtest all have their own debug.log files
- Feature tests log to temp files which get cleaned up unless your test fails or
you specify
--no-cleanup
These are examples where you are interacting with the code yourself and don't rely on tests to reproduce the error.
In general you can use to your std::out but this will not appear in any logs.
It is rather recommended to use LogPrintf. Insert into your code a line similar
to the following example.
LogPrintf("@@@");
You can then grep for the result in your debug.log file:
$ cat ~/Library/Application\ Support/Bitcoin/regtest/debug.log | grep @@@
This example shows the path of the regtest environment debug.log file. Remember
to change this if you are logging from testnet or another environment.
If you would like to log from inside files that validate consensus rules
(see src/Makefile.am)
then you will errors from missing header files and when you have added those
the linker will complain. You can make this work, of course, but I would
recommend you use a debugger in that context instead.
You can start your bitcoind using a debugging tool like lldb in order to debug
the code:
$ lldb src/bitcoind
Within the lldb console you can set breakpoints before actually running starting
the bitcoind process using the run command. You can then interact with the bitcoind
process like you normally would using your bitcoin-cli.
You are running unit tests which are located at src/test/ and use the BOOST library
test framework. These are executed by a seperate executable that is also compiled with
make. It is located at src/test/test_bitcoin.
So helpful tips about execution (this uses the Boost library).
Run just one test file:
src/test/test_bitcoin --log_level=all --run_test=getarg_tests
Run just one test:
src/test/test_bitcoin --log_level=all --run_test=*/the_one_test
Logging from the tests you need to use the BOOST framework provided functions to
achieve seeing the logging output. Several methods are available, but simplest
is probably adding BOOST_TEST_MESSAGE in your code:
BOOST_TEST_MESSAGE("@@@");
To have log statements from your code appear in the unit test output you will have
to print to stderr directly:
fprintf(stderr, "from the code");
You can start the test_bitcoin binary using lldb just like bitcoind. This allows you
to set breakpoints anywhere in your unit test or the code and then execute the tests
any way you want using the run keyword followed by the arguments you would normally
pass to test_bitcoin when calling it directly.
$ lldb src/test/test_bitcoin
(lldb) target create "src/test/test_bitcoin"
Traceback (most recent call last):
File "<input>", line 1, in <module>
File "/usr/local/Cellar/python@2/2.7.16/Frameworks/Python.framework/Versions/2.7/lib/python2.7/copy.py", line 52, in <module>
import weakref
File "/usr/local/Cellar/python@2/2.7.16/Frameworks/Python.framework/Versions/2.7/lib/python2.7/weakref.py", line 14, in <module>
from _weakref import (
ImportError: cannot import name _remove_dead_weakref
Current executable set to 'src/test/test_bitcoin' (x86_64).
(lldb) run --log_level=all --run_test=*/lthash_tests
You are running tests located in test/functional/ which are written in python.
for log level debug run functional tests with --loglevel=debug.
self.log.info("foo")
self.log.debug("bar")
Use --tracerpc to see the log outputs from the RPCs of the different nodes running in the functional
test in std::out.
If it doesn't fail, make it fail and use this:
TestFramework (ERROR): Hint: Call /Users/FJ/projects/clones/bitcoin/test/functional/combine_logs.py '/var/folders/9z/n7rz_6cj3bq__11k5kcrsvvm0000gn/T/bitcoin_func_test_epkcr926' to consolidate all logs
You can even assert on logging messages using with self.nodes[0].assert_debug_log(["lkagllksa"]):.
However, don't change indentation of test lines. Just insert somewhere indented between def run_test
and the body of it.
Using LogPrintf, as seen before, you will be able to see the output in the combined logs.
In case you have not done it yet, compile bitcoin for debugging (change other config flags as you need them).
$ make clean
$ ./configure CXXFLAGS="-O0 -ggdb3"
$ make -j "$(($(sysctl -n hw.physicalcpu)+1))"
Your should see something like this:
$ lldb -v
lldb-1001.0.13.3
You could halt the test with a sleep as well but much cleaner (although a little confusing maybe) is to use another
debugger within python: pdb.
Add the following line before the functional test causing the error that you want to debug:
import pdb; pdb.set_trace()
Then run your test. You will need to call the test directly and not run it through the test_runner.py because
then you could not get access to the pdb console.
$ ./test/functional/example_test.py
Start lldb with the running bitcoind process (might not work if you have other bitcoind processes running). Just running lldb instead of PATH=/usr/bin /usr/bin/lldb might work for you, too, but lots of people seem to run into problems when lldb tries to use their system python in that case.
$ PATH=/usr/bin /usr/bin/lldb -p $(pgrep bitcoind)
Set you breakpoint with b, then you have to enter continue since lldb is setting a stop to the process as well.
(lldb) b createwallet
Breakpoint 1: [...]
(lldb) continue
Process XXXXX resuming
You can now let you test continue so that the process is actually running into your breakpoint.
(Pdb) continue
You should now see something like this in you lldb and can start debugging:
Process XXXXX stopped
* thread #10, name = 'bitcoin-httpworker.3', stop reason = breakpoint 1.1
frame #0: 0x00000001038c8e43 bitcoind`createwallet(request=0x0000700004d55a10) at rpcwallet.cpp:2642:9
2639 static UniValue createwallet(const JSONRPCRequest& request)
2640 {
2641 RPCHelpMan{
-> 2642 "createwallet",
2643 "\nCreates and loads a new wallet.\n",
2644 {
2645 {"wallet_name", RPCArg::Type::STR, RPCArg::Optional::NO, "The name for the new wallet. If this is a path, the wallet will be created at the path location."},
Target 0: (bitcoind) stopped.
(lldb)
A core dump is a full dump of the working memory of your computer. When activated it will
be created in /cores on your computer in case a segfault happens.
To activate core dumps on macOS you have to run
$ ulimit -c unlimited
then you have to run the process where you are observing the segfault in the same terminal.
You can then inspect them in your /cores directory.
You should always make sure to not generate more core dumps than you need to and clean up
your /cores directory when you have solved your issue. Core dumps are huge files and
can clutter up your disc space very quickly.
On newer MacOS versions this is harder than you might think because you can only install it through homebrew up to version 10.13. If you currently have an up-to-date MacOS Mojave installed you will have to use the following script to make it work.
$ brew install --HEAD https://raw.githubusercontent.com/sowson/valgrind/master/valgrind.rb
Using valgrind works similar to lldb. You start the executable where the segfault might
happen using valgrind, when an error is observed you will be able to inspect it.
For example:
$ sudo valgrind src/bitcoind -regtest
Now you can interact with your bitcoind normally using bitcoin-cli, for example, and
trigger the error by hand using the right parameters.
- Bitcoin Stackexchange should be your first point of contact if you are truely stuck
- IRC channels are another possibility to find help for specific topics
- Bitcoin core READMEs have lots of information of course. You may find some overlaps with this guide but they should still be very helpful.
https://medium.com/provoost-on-crypto/debugging-bitcoin-core-functional-tests-cc0aa6e7fd3e https://bitcoin.stackexchange.com/questions/76521/debugging-bitcoin-unit-tests