geosp

Thunderbolt Networking Setup on Linux

This guide documents the steps to enable and configure Thunderbolt networking on your Linux system (e.g., Ubuntu, Proxmox). It covers loading the necessary kernel modules, ensuring persistent interface naming, configuring a fixed IP address, and testing throughput with iperf3. Note that Thunderbolt 3/4 hardware advertises a raw bandwidth of 40 Gbps, but practical throughput is typically lower due to half‑duplex operation, protocol overhead, and system constraints.

Hardware Used in This Guide

This guide was developed and tested with the following hardware:

• CPU: AMD Ryzen 9 PRO 6950H
  • 8 cores / 16 threads
• 3.3 GHz base frequency / 4.94 GHz boost

scyto

ProxMox Cluster - Soup-to-Nutz

aka what i did to get from nothing to done.

note: these are designed to be primarily a re-install guide for myself (writing things down helps me memorize the knowledge), as such don't take any of this on blind faith - some areas are well tested and the docs are very robust, some items, less so). YMMV

Purpose of Proxmox cluster project

Required Outomces of cluster project