Created
October 6, 2018 03:33
-
-
Save X3msnake/c42c911639dc03f51ef982bb44729970 to your computer and use it in GitHub Desktop.
DVD-CNC-GRBL-Settings
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ 0 = 53.333 (x, step / mm) | |
| $ 1 = 53.333 (y, step / mm) | |
| $ 2 = 53.330 (z, step / mm) | |
| $ 3 = 10 (step pulse, usec) | |
| $ 4 = 200.000 (default feed, mm / min) | |
| $ 5 = 200.000 (default seek, mm / min) | |
| $ 6 = 28 (step port invert mask, int: 00011100) | |
| $ 7 = 50 (step idle delay, msec) | |
| $ 8 = 100.000 (acceleration, mm / sec ^ 2) | |
| $ 9 = 0.050 (junction deviation, mm) | |
| $ 10 = 0.100 (arc, mm / segment) | |
| $ 11 = 25 (n-arc correction, int) | |
| $ 12 = 3 (n-decimals, int) | |
| $ 13 = 0 (report inches, bool) | |
| $ 14 = 1 (auto start, bool) | |
| $ 15 = 0 (invert step enable, bool) | |
| $ 16 = 1 (hard limits, bool) | |
| $ 17 = 1 (homing cycle, bool) | |
| $ 18 = 69 (homing you invert mask, int: 00000000) | |
| $ 19 = 200.000 (homing feed, mm / min) | |
| $ 20 = 200.000 (homing seek, mm / min) | |
| $ 21 = 100 (homing debounce, msec) | |
| $ 22 = 2.000 (homing pull-off, mm) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
These settings work for the drv8825 when set as 1/8 microstepping
MS0 High
MS1 High
MS2 Low